Document Center List of Standards on Dividing And Tool-Workpiece Holding Devices
ICS Code 25.060.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-1089 - Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types
- BS-1098-1 - Specification for jig bushes. Inch units
- BS-1098-2 - Specification for jig bushes
- BS-1660 - Specification for machine tapers, reduction sleeves and extension sockets
- BS-1660-1 - Machine tapers
- BS-1660-11 - Machine tapers
- BS-1660-12 - Machine tapers
- BS-1660-2 - Machine tapers
- BS-1660-3 - Machine tapers
- BS-1660-4 - Machine tapers
- BS-1660-5 - Machine tapers
- BS-1660-6 - Machine tapers.Specification for adaptors with external 7/24 tapers for tools with Morse taper shanks
- BS-1660-7 - Machine tapers
- BS-1660-9 - Machine tapers
- BS-1935 - Specification for spindle noses and adjustable adaptors for multi-spindle heads
- BS-1983-1 - Specification for chucks for machine tools and portable power tools
- BS-1983-2 - Specification for Workholding Chucks, Power Operated
- BS-1983-3 - Chucks for machine tools and portable power tools
- BS-1983-4 - Chucks for machine tools and portable power tools
- BS-1983-5 - Chucks for machine tools and portable power tools
- BS-1983-6 - Specification for Jaw Serrations, Interfaces & Tee Nuts
- BS-1983-7 - Chucks for machine tools and portable power tools
- BS-4185-7 - Machine tool components
- BS-4193-14 - Hardmetal insert tooling
- BS-4193-6 - Hardmetal insert tooling
- BS-426 - Specification for fixed centres for use on machine tools and in other applications
- BS-4442-1 - Specification for lathe spindle noses and faceplates.
- BS-4656-12 - Specification for the accuracy of machine tools and methods of test
- BS-5078 - Specification for jig and fixture components
- BS-5326 - Specification. Internal broaching tools and pull chuck locations
- BS-5535 - Specification for right angle and box angle plates
- BS-7568-11 - Press tools
- BS-7568-31 - Press tools
- BS-7568-32 - Press tools
- BS-EN-1550 - Machine-tools safety. Safety requirements for the design and construction of work holding chucks
- BS-ISO-10649-1 - Cutter arbors with parallel key and tenon drive
- BS-ISO-10649-2 - Cutter arbors with parallel key and tenon drive
- BS-ISO-10649-3 - Cutter arbors with parallel key and tenon drive
- BS-ISO-10649-4 - Cutter arbors with parallel key and tenon drive
- BS-ISO-10649-5 - Cutter arbors with parallel key and tenon drive
- BS-ISO-10649-6 - Cutter arbors with parallel key and tenon drive
- BS-ISO-10889-2 - Tool holders with cylindrical shank
- BS-ISO-10889-3 - Tool holders with cylindrical shank
- BS-ISO-10889-4 - Tool holders with cylindrical shank
- BS-ISO-10889-5 - Tool holders with cylindrical shank
- BS-ISO-10889-6 - Tool holders with cylindrical shank
- BS-ISO-10889-7 - Tool holders with cylindrical shank
- BS-ISO-10897 - Collets for tool holders with taper ratio 1:10. Collets, holders, nuts
- BS-ISO-12164-1 - Hollow taper interface with flange contact surface
- BS-ISO-12164-1-TC - Tracked Changes. Hollow taper interface with flange contact surface
- BS-ISO-12164-2 - Hollow taper interface with flange contact surface
- BS-ISO-12164-2-TC - Tracked Changes. Hollow taper interface with flange contact surface
- BS-ISO-12164-3 - Hollow taper interface with flange contact surface
- BS-ISO-12164-3-TC - Tracked Changes. Hollow taper interface with flange contact surface
- BS-ISO-12164-4 - Hollow taper interface with flange contact surface
- BS-ISO-12164-4-TC - Tracked Changes. Hollow taper interface with flange contact surface
- BS-ISO-12164-5 - Hollow taper interface with flange contact surface
- BS-ISO-12164-6 - Hollow taper interface with flange contact surface
- BS-ISO-19719 - Machine tools. Work holding chucks. Vocabulary
- BS-ISO-22402-1 - Medium-transfer units for tool interfaces
- BS-ISO-22402-2 - Medium-transfer units for tool interfaces
- BS-ISO-238 - Reduction sleeves and extension sockets for tools with Morse taper shanks
- BS-ISO-26622-1 - Modular taper interface with ball track system
- BS-ISO-26622-2 - Modular taper interface with ball track system
- BS-ISO-26623-1 - Polygonal taper interface with flange contact surface
- BS-ISO-26623-2 - Polygonal taper interface with flange contact surface
- BS-ISO-3089 - Machine tools. Test conditions for self-centring, manually-operated chucks with one-piece jaws
- BS-ISO-3442-1 - Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws. Manually operated chucks with tongue and groove type jaws
- BS-ISO-3442-2 - Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws. Power-operated chucks with tongue and groove type jaws
- BS-ISO-3442-3 - Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws
- BS-ISO-3937-1 - Cutter arbors with tenon drive
- BS-ISO-3937-2 - Cutter arbors with tenon drive
- BS-ISO-3937-3 - Cutter arbors with tenon drive
- BS-ISO-4202 - Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
- BS-ISO-4207 - Counterbores with Morse taper shanks and detachable pilots
- BS-ISO-5414-1 - Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools
- BS-ISO-5414-2 - Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools
- BS-ISO-5415 - Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
- BS-ISO-5608 - Turning and copying tool holders and cartridges for indexable inserts. Designation
- BS-ISO-702-1 - Machine tools. Connecting dimensions of spindle noses and work holding chucks
- BS-ISO-702-2 - Machine tools. Connecting dimensions of spindle noses and work holding chucks
- BS-ISO-702-3 - Machine tools. Connecting dimensions of spindle noses and work holding chucks
- BS-ISO-7388-1 - Tool shanks with 7/24 taper for automatic tool changers
- BS-ISO-7388-2 - Tool shanks with 7/24 taper for automatic tool changers
- BS-ISO-7388-3 - Tool shanks with 7/24 taper for automatic tool changers
- BS-ISO-839-1 - Milling machine arbors with 7/24 tapers
ISO:
- ISO-10649-1 - Cutter arbors with parallel key and tenon drive - Part 1: General dimensions
- ISO-10649-2 - Cutter arbors with parallel key and tenon drive - Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
- ISO-10649-3 - Cutter arbors with parallel key and tenon drive - Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
- ISO-10649-4 - Cutter arbors with parallel key and tenon drive - Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
- ISO-10649-5 - Cutter arbors with parallel key and tenon drive - Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
- ISO-10649-6 - Cutter arbors with parallel key and tenon drive - Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
- ISO-1080 - Machine tools - Morse taper shanks - Cotter slots with taper keys
- ISO-10889-1 - Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore - Technical delivery conditions
- ISO-10889-2 - Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs
- ISO-10889-3 - Tool holders with cylindrical shank - Part 3: Type B with rectangular radial seat
- ISO-10889-4 - Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat
- ISO-10889-5 - Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat
- ISO-10889-6 - Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat
- ISO-10889-7 - Tool holders with cylindrical shank - Part 7: Type F with taper seat
- ISO-10889-8 - Tool holders with cylindrical shank - Part 8: Type Z, accessories
- ISO-10897 - Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts
- ISO-12164-1 - Hollow taper interface with flange contact surface - Part 1: Shanks of types A, AB, C, CB and EB
- ISO-12164-2 - Hollow taper interface with flange contact surface - Part 2: Receivers of types A, C and E for hollow taper shanks of types A, AB, C, CB and EB
- ISO-12164-3 - Hollow taper interface with flange contact surface - Part 3: Shanks of types T, TA and U
- ISO-12164-4 - Hollow taper interface with flange contact surface - Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U
- ISO-12164-5 - Hollow taper interface with flange contact surface - Part 5: Shanks of types AS, CS and ES
- ISO-12164-6 - Hollow taper interface with flange contact surface - Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES
- ISO-15488 - Collets with 8 degree setting angle for tool shanks - Collets, nuts and fitting dimensions
- ISO-19719 - Machine tools - Work holding chucks - Vocabulary
- ISO-22402-1 - Medium-transfer units for tool interfaces - Part 1: Transfer units for hollow taper shanks in accordance with the ISO 12164 series
- ISO-22402-2 - Medium-transfer units for tool interfaces - Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series
- ISO-238 - Reduction sleeves and extension sockets for tools with Morse taper shanks
- ISO-26622-1 - Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks
- ISO-26622-2 - Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers
- ISO-26623-1 - Polygonal taper interface with flange contact surface - Part 1: Dimensions and designation of shanks
- ISO-26623-2 - Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers
- ISO-296 - Machine tools - Self-holding tapers for tool shanks
- ISO-297 - 7/24 tapers for tool shanks for manual changing
- ISO-299 - Machine tool tables - T-slots and corresponding bolts
- ISO-3089 - Machine tools - Test conditions for self-centring, manually operated chucks with one-piece jaws
- ISO-3442 - Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) - Sizes for interchangeability and acceptance test specifications
- ISO-3442-1 - Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws
- ISO-3442-2 - Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws
- ISO-3442-3 - Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws
- ISO-3936 - Reduction sleeves with tenon drive with external and internal 7/24 taper - Dimensions
- ISO-3937 - Cutter arbors with tenon drive - Dimensions
- ISO-3937-1 - Cutter arbors with tenon drive - Part 1: Dimensions of Morse taper
- ISO-3937-2 - Cutter arbors with tenon drive - Part 2: Dimensions of 7/24 taper
- ISO-3937-3 - Cutter arbors with tenon drive - Part 3: Dimensions of hollow taper interface with flange contact surface
- ISO-4202 - Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
- ISO-4207 - Counterbores with Morse taper shanks and detachable pilots
- ISO-4247 - Jig bushes and accessories for drilling purposes - Dimensions
- ISO-4248 - Jig bushes - Definitions and nomenclature
- ISO-5413 - Machine tools - Positive drive of Morse tapers
- ISO-5414-1 - Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 1: Dimensions of the driving system of tool shanks
- ISO-5414-2 - Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 2: Connecting dimensions of chucks and designation
- ISO-5415 - Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
- ISO-5734 - Acceptance conditions of mechanical dividing heads for machine tools - Testing of accuracy
- ISO-702-1 - Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection
- ISO-702-2 - Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type
- ISO-702-3 - Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type
- ISO-702-4 - Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 4: Cylindrical connection
- ISO-7388-1 - Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
- ISO-7388-1/1 - Addendum 1 to ISO 7388-1:1983 Conicity tolerances
- ISO-7388-2 - Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF
- ISO-7388-3 - Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
- ISO-839-1 - Milling machine arbors with 7/24 tapers - Part 1: Dimensions and designation
- ISO-839-2 - Milling machine arbors with 7/24 tapers - Part 2: Accessories
- ISO-9270 - 7/24 tapers for tool shanks for automatic changing - Tapers for spindle noses
- ISO-9270-1 - 7/24 taper spindle noses for automatic tool changers - Part 1: Dimensions and designation of spindle noses of forms S and SF
- ISO-9270-2 - 7/24 taper spindle noses for automatic tool changers - Part 2: Dimensions and designation of spindle noses of forms J and JF
- ISO-9401 - Machine tools - Jaw mountings on power chucks
Other SDOs:
- DIN-69180-2 - Holding fixtures of abrasive sleeves; holding fixtures for stationary machines
- DIN-ISO-10889-1 - Part 1: Cylindrical Shank. Location Bore - Technical Delivery Conditions, Tool Holders
- DIN-ISO-10889-2 - Part 2: Type a, Shanks for Tool Holders of Special Designs, Tool Holders With Cylindr
- DIN-ISO-10889-3 - Part 3: Type B With Rectangular Radial Seat, Tool Holders With Cylindrical Shank
- DIN-ISO-10889-4 - Part 4: Type C With Rectangular Axial Seat, Tool Holders With Cylindrical Shank
- DIN-ISO-10889-5 - Part 5: Type D With More Than One Rectangular Seat, Tool Holders With Cylindrical Shan
- DIN-ISO-10889-6 - Part 6: Type E With Cylindrical Seat, Tool Holders With Cylindrical Shank
- DIN-ISO-10889-7 - Part 7: Type F With Taper Seat, Tool Holders With Cylindrical Shank
- DIN-ISO-10889-8 - Part 8: Type Z, Accessories, Tool Holders With Cylindrical Shank
- DIN-ISO-10897 - Collets for Tool Holders With Taper Ratio 1:10 - Collets, Holders, Nuts
- DIN-ISO-11900-3 - Part 3: Type E, Reduced for Heavy Duty, Tools for Pressing, Ball-Lock Punch Retainers
- DIN-ISO-15488 - Collets With 8 Degrees Setting Angle for Tool Shanks - Collets, Nuts & Fitting Dimensi
- EN-1550 - Machine-Tools Safety - Safety Requirements for the Design & Construction of Work Hold
- JIS-B-0952 - Machine tool tables -- T-slots and corresponding bolts
- JIS-B-6109-1 - Part 1: Conical Connection, Machine Tools - Connecting Dimensions of Spindle Noses & W
- JIS-B-6109-2 - Part 2: Cylindrical Connection, Machine Tools - Connecting Dimensions of Spindle Noses
- SMS-9004 - Grinding machines and abrasive products - List ofSwedish standards
- SS-EN-10152 - Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
- SS-EN-1550 - Machine-tools safety - Safety requirements for the design and construction of work holding chucks
- SS-EN-ISO-6848 - Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)
- SS-ISO-10073 - Tools for moulding - Support pillars (ISO 10073:2008, IDT)
- SS-ISO-10649-1 - Cutter arbors with parallel key and tenon drive - Part 1: General dimensions (ISO 10649-1:2013, IDT)
- SS-ISO-10649-2 - Cutter arbors with parallel key and tenon drive - Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface (ISO 10649-2:2013, IDT)
- SS-ISO-10649-3 - Cutter arbors with parallel key and tenon drive - Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer (ISO 10649-3:2013, IDT)
- SS-ISO-10649-4 - Cutter arbors with parallel key and tenon drive - Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer (ISO 10649-4:2013, IDT)
- SS-ISO-10649-5 - Cutter arbors with parallel key and tenon drive - Part 5: Dimensions and designation of tool holders with polygonal interface with flange contact surface (ISO 10649-5:2012, IDT)
- SS-ISO-10649-6 - Cutter arbors with parallel key and tenon drive - Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system (ISO 10649-6:2012, IDT)
- SS-ISO-10889-1 - Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore - Technical delivery conditions (ISO 10889-1:2004, IDT)
- SS-ISO-10889-2 - Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs (ISO 10889-2:2016, IDT)
- SS-ISO-10889-3 - Tool holders with cylindrical shank - Part 3: Type B with rectangular radial seat (ISO 10889-3:2016, IDT)
- SS-ISO-10889-4 - Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat (ISO 10889-4:2016, IDT)
- SS-ISO-10889-5 - Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat (ISO 10889-5:2016, IDT)
- SS-ISO-10889-6 - Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat (ISO 10889-6:2016, IDT)
- SS-ISO-10889-7 - Tool holders with cylindrical shank - Part 7: Type F with taper seat (ISO 10889-7:2004, IDT)
- SS-ISO-10889-8 - Tool holders with cylindrical shank - Part 8: Type Z, accessories
- SS-ISO-10897 - Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts (ISO 10897:2016, IDT)
- SS-ISO-12164-1 - Hollow taper interface with flange contact surface Part 1: Shanks of types A, AB, C, CB and EB (ISO 12164-1:2023, IDT)
- SS-ISO-12164-2 - Hollow taper interface with flange contact surface - Part 2: Receivers - Dimensions
- SS-ISO-12164-3 - Hollow taper interface with flange contact surface Part 3: Shanks of types T, TA and U (ISO 12164-3:2023, IDT)
- SS-ISO-12164-4 - Hollow taper interface with flange contact surface Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U (ISO 12164-4:2023, IDT)
- SS-ISO-15488 - Collets with 8 degrees setting angle for tool shanks - Collets, nuts and fitting dimensions (ISO 15488:2003, IDT)
- SS-ISO-19719 - Machine tools - Work holding chucks - Vocabulary (ISO 19719:2010, IDT)
- SS-ISO-238 - Reduction sleeves and extension sockets for tools with Morse taper shanks (ISO 238:2016, IDT)
- SS-ISO-26622-1 - Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks (ISO 26622-1:2017, IDT)
- SS-ISO-26622-2 - Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers (ISO 26622-2:2008, IDT)
- SS-ISO-26623-1 - Polygonal taper interface with flange contact surface Part 1: Dimensions and designation of shanks (ISO 26623-1:2020, IDT)
- SS-ISO-26623-2 - Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers (ISO 26623-2:2014, IDT)
- SS-ISO-296 - Machine tools - Self-holding tapers for tool shanks
- SS-ISO-297 - 7/24 tapers for tool shanks for manual changing
- SS-ISO-298 - Machine tools - Lathe centres - Sizes for interchangeability
- SS-ISO-299 - Machine tool for tables - T-slots and corresponding bolts
- SS-ISO-3089 - Machine tools - Test conditions for self-centring, manually-operated chucks with one-piece jaws (ISO 3089:2005, IDT)
- SS-ISO-3442 - Self-centering chucks for machine tools with two-piece jaws (tongue and groove type) - Sizes for interchangeability and acceptance test specifications
- SS-ISO-3442-1 - Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws (ISO 3442-1:2005, IDT)
- SS-ISO-3442-2 - Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power operated chucks with tongue and groove type jaws (ISO 3442-2:2005, IDT)
- SS-ISO-3442-3 - Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws (ISO 3442-3:2007, IDT)
- SS-ISO-3936 - Reduction sleeves with tenon drive with external and internal 7/24 taper - Dimensions (ISO 3936:1993, IDT)
- SS-ISO-3937-1 - Cutter arbors with tenon drive - Part 1: Dimensions of Morse taper (ISO 3937-1:2008, IDT)
- SS-ISO-3937-2 - Cutter arbors with tenon drive - Part 2: Dimensions of 7/24 taper (ISO 3937-2:2008, IDT)
- SS-ISO-3937-3 - Cutter arbors with tenon drive - Part 3: Dimensions of hollow taper interface with flange contact surface (ISO 3937-3:2008, IDT)
- SS-ISO-4202 - Reduction sleeves with external 7/24 taper for tools with Morse taper shanks (ISO 4202:2016, IDT)
- SS-ISO-4207 - Counterbores with Morse taper shanks and detachable pilots (ISO 4207:2016, IDT)
- SS-ISO-5414-1 - Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 1: Dimensions of the driving system of tool shanks (ISO 5414-1:2002, IDT)
- SS-ISO-5414-2 - Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 2: Connecting dimensions of chucks and designation (ISO 5414-2:2002, IDT)
- SS-ISO-5415 - Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw (ISO 5415:2007, IDT)
- SS-ISO-5608 - Turning and copying tool holders and cartridges for indexable inserts - Designation (ISO 5608:2012, IDT)
- SS-ISO-5611 - Cartridges, type A, for indexable inserts - Dimensions
- SS-ISO-5611-1 - Cartridges, type A, for indexable inserts - Part 1: General survey, correlation and determination of dimensions (ISO 5611-1:2015, IDT)
- SS-ISO-5611-10 - Cartridges, type A, for indexable inserts - Part 10: Style U (ISO 5611-10:2015, IDT)
- SS-ISO-5611-11 - Cartridges, type A, for indexable inserts - Part 11: Style W (ISO 5611-11:2015, IDT)
- SS-ISO-5611-12 - Cartridges, type A, for indexable inserts - Part 12: Style Y (ISO 5611-12:2015, IDT)
- SS-ISO-5611-2 - Cartridges, type A, for indexable inserts - Part 2: Style F (ISO 5611-2:2015, IDT)
- SS-ISO-5611-3 - Cartridges, type A, for indexable inserts - Part 3: Style G (ISO 5611-3:2015, IDT)
- SS-ISO-5611-4 - Cartridges, type A, for indexable inserts - Part 4: Style J (ISO 5611-4:2015, IDT)
- SS-ISO-5611-5 - Cartridges, type A, for indexable inserts - Part 5: Style K (ISO 5611-5:2015, IDT)
- SS-ISO-5611-6 - Cartridges, type A, for indexable inserts - Part 6: Style L (ISO 5611-6:2015, IDT)
- SS-ISO-5611-7 - Cartridges, type A, for indexable inserts - Part 7: Style R (ISO 5611-7:2015, IDT)
- SS-ISO-5611-8 - Cartridges, type A, for indexable inserts - Part 8: Style S (ISO 5611-8:2015, IDT)
- SS-ISO-5611-9 - Cartridges, type A, for indexable inserts - Part 9: Style T (ISO 5611-9:2015, IDT)
- SS-ISO-666 - Machine tools - Mounting of grinding wheels by means of hub flanges (ISO 666:2012, IDT)
- SS-ISO-6753-1 - Tools for pressing and moulding - Machined plates - Part 1: Machined plates for press tools (ISO 6753-1:2005, IDT)
- SS-ISO-702-1 - Machine tools - Connecting dimensions of spindle noses and workholding chucks - Part 1: Conical connection (ISO 702-1:2009, IDT)
- SS-ISO-702-2 - Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type (ISO 702-2:2007, IDT)
- SS-ISO-702-3 - Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type (ISO 702-3:2007, IDT)
- SS-ISO-702-4 - Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 4: Cylindrical connection (ISO 702-4:2004, IDT)
- SS-ISO-7388-1 - Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007, IDT)
- SS-ISO-7388-2 - Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF (ISO 7388-2:2007, IDT)
- SS-ISO-7388-3 - Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF (ISO 7388-3:2016, IDT)
- SS-ISO-839-1 - Milling machine arbors with 7/24 tapers - Part 1: Dimensions and designation (ISO 839-1:2006, IDT)
- SS-ISO-839-2 - Milling machine arbors with 7/24 tapers - Part 2: Acessories (ISO 839-2:1977, IDT)
- SS-ISO-8479 - Aerospace - "Q" clamps (centre-mounted clamps) for fluid systems - Dimensions
- SS-ISO-8526-1 - Modular units for machine tools - Workholding pallets - Part 1: Workholding pallets up to 800 mm nominal size
- SS-ISO-8526-2 - Modular units for machine tools - Workholding pallets - Part 2: Workholding pallets of nominal sizegreater than 800 mm
- SS-ISO-9183-1 - Tools for pressing - Wear plates for press dies - Part 1: Type A (ISO 9183-1:2008, IDT)
- SS-ISO-9270-1 - 7/24 taper spindle noses for automatic tool changers - Part 1: Dimensions and designation of spindle noses of forms S and SF (ISO 9270-1:2010, IDT)
- SS-ISO-9270-2 - 7/24 taper spindle noses for automatic tool changers - Part 2: Dimensions and designation of spindle noses of forms J and JF (ISO 9270-2:2010, IDT)
- SS-ISO-9448-10 - Tools for pressing - Guide bushes - Part 10: Form E, gliding bushes, flanged, type 2 (ISO 9448-10, IDT)