15.04: Soaps and Other Detergents; Polishes; Leather; Resilient Floor Coverings
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-D1172 - Standard Guide for pH of Aqueous Solutions of Soaps and Detergents
- ASTM-D1173 - Standard Test Method for Foaming Properties of Surface-Active Agents
- ASTM-D1279 - Standard Test Method for Buffering Action of Metal Cleaners (Withdrawn 1999)
- ASTM-D1280 - Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners (Withdrawn 2023)
- ASTM-D1288 - Method of Test for Total Ash and Silica in Water-Emulsion Polishes (Withdrawn 1984)
- ASTM-D1290 - Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
- ASTM-D1342 - Standard Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax (Withdrawn 2007)
- ASTM-D1374 - Standard Test Method of Aerated Total Immersion Corrosion Test for Metal Cleaners
- ASTM-D1386 - Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
- ASTM-D1387 - Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
- ASTM-D1436 - Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
- ASTM-D1437 - Method of Flash Point of Solvent-Type Liquid Waxes (Withdrawn 1984)
- ASTM-D1455 - Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish
- ASTM-D1516 - Standard Test Method for Width of Leather
- ASTM-D1517 - Standard Terminology Relating to Leather
- ASTM-D1567 - Standard Test Method for Detergent Cleaners for Evaluation of Corrosive Effects on Certain Porcelain Enamels
- ASTM-D1568 - Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates (Withdrawn 2023)
- ASTM-D1569 - Standard Test Methods for Detergent Alkylate (Withdrawn 2023)
- ASTM-D1570 - Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
- ASTM-D1610 - Standard Practice for Conditioning Leather and Leather Products for Testing
- ASTM-D1611 - Standard Test Method for Corrosion Produced by Leather in Contact with Metal
- ASTM-D1681 - Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure (Withdrawn 2023)
- ASTM-D1767 - Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents
- ASTM-D1768 - Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
- ASTM-D1791 - Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes
- ASTM-D1792 - Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes
- ASTM-D1793 - Standard Test Method for Water Spotting of Emulsion Floor Polishes
- ASTM-D1794 - Method of Test for Alcohol-Benzene Soluble Matter in Cellulose (Withdrawn 1991)
- ASTM-D1813 - Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM-D1814 - Standard Test Method for Measuring Thickness of Leather Units
- ASTM-D1815 - Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather
- ASTM-D1912 - Standard Test Method for Cold-Crack Resistance of Upholstery Leather
- ASTM-D1913 - Standard Test Method for Resistance to Wetting of Garment-Type Leathers
(Spray Test) - ASTM-D1986 - Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
- ASTM-D2021 - Standard Specification for Neutral Detergent, 40 Percent Alkylbenzene Sulfonate Type (Withdrawn 2000)
- ASTM-D2022 - Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
- ASTM-D2023 - Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
- ASTM-D2024 - Standard Test Method for Cloud Point of Nonionic Surfactants
- ASTM-D2047 - Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
- ASTM-D2048 - Standard Test Method for Powdering of Floor Polish Films
- ASTM-D2096 - Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather
- ASTM-D2097 - Standard Test Method for Flex Testing of Finish on Upholstery Leather
- ASTM-D2098 - Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester
- ASTM-D2099 - Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
- ASTM-D2180 - Standard Test Method for Active Oxygen in Bleaching Compounds
- ASTM-D2207 - Standard Test Method for Bursting Strength of Leather by the Ball Method
- ASTM-D2208 - Standard Test Method for Breaking Strength of Leather by the Grab Method
- ASTM-D2209 - Standard Test Method for Tensile Strength of Leather
- ASTM-D2210 - Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test
- ASTM-D2211 - Standard Test Method for Elongation of Leather
- ASTM-D2212 - Standard Test Method for Slit Tear Resistance of Leather
- ASTM-D2213 - Standard Test Method for Compressibility of Leather
- ASTM-D2214 - Standard Test Method for Estimating the Thermal Conductivity of Leather with the Cenco-Fitch Apparatus (Withdrawn 2008)
- ASTM-D2281 - Standard Test Method for Evaluation of Wetting Agents by the Skein Test
- ASTM-D2322 - Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
- ASTM-D2346 - Standard Test Method for Apparent Density of Leather
- ASTM-D2347 - Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM-D2357 - Standard for Qualitative Classification of Surfactants by Infrared Absorption
- ASTM-D2358 - Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
- ASTM-D2553 - Method of Test for Detecting Odor of Drycleaning Detergent on a Drycleaned Garment (Withdrawn 1992)
- ASTM-D2617 - Standard Test Method for Total Ash in Leather
- ASTM-D2760 - Standard Test Method for Analysis of Sodium Triphosphate by the Simplified Paper Chromatographic Method (Withdrawn 2000)
- ASTM-D2761 - Standard Test Method for Analysis of Sodium Triphosphate by the Simplified Ion Exchange Method (Withdrawn 2001)
- ASTM-D2807 - Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
- ASTM-D2810 - Standard Test Method for pH of Leather
- ASTM-D2813 - Standard Practice for Sampling Leather for Physical and Chemical Tests
- ASTM-D2821 - Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
- ASTM-D2825 - Standard Terminology Relating to Polishes and Related Materials
- ASTM-D2834 - Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
- ASTM-D2868 - Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet Blue and Wet White
- ASTM-D2875 - Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather
- ASTM-D2876 - Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather
- ASTM-D2941 - Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
- ASTM-D2959 - Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
- ASTM-D2960 - Standard Guide for Controlled Laundering Test Using Naturally Soiled Fabrics and Household Appliances (Withdrawn 2013)
- ASTM-D3046 - Standard Specification for Powdered Hand Cleaner (Soap with Borax) (Withdrawn 2001)
- ASTM-D3048 - Standard Test Method of Assay for Alkaline Protease
- ASTM-D3049 - Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
- ASTM-D3050 - Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
- ASTM-D3052 - Standard Practice for Rating Water-Emulsion Floor Polishes
- ASTM-D3153 - Standard Test Method for Recoatability of Water-Emulsion Floor Polishes
- ASTM-D3206 - Standard Test Method for Soil Resistance of Floor Polishes
- ASTM-D3207 - Standard Test Method for Detergent Resistance of Floor Polish Films
- ASTM-D3209 - Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes
- ASTM-D3210 - Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
- ASTM-D3400 - Standard Specification for Liquid Sodium Silicates (Withdrawn 2001)
- ASTM-D3430 - Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
- ASTM-D3440 - Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
- ASTM-D3494 - Standard Specification for Water-Emulsion Floor Polish Remover (Withdrawn 2000)
- ASTM-D3495 - Standard Test Method for Hexane Extraction of Leather
- ASTM-D3543 - Standard Test Method for Metal Glide Adhesion
- ASTM-D3556 - Standard Guide for Deposition on Glassware During Mechanical Dishwashing
- ASTM-D3564 - Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring
- ASTM-D3565 - Standard Test Method for Tableware Pattern Removal by Mechanical Dishwasher Detergents
- ASTM-D3598 - Standard Test Method for Citrate in Synthetic Detergents
- ASTM-D3642 - Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
- ASTM-D3643 - Standard Test Method for Acid Number of Certain Alkali-Soluble Resins
- ASTM-D3644 - Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
- ASTM-D3673 - Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates
- ASTM-D3714 - Test Method for Black Marking Resistance of Floor Polishes as Measured by the Ladder and Pendulum Apparatus (Withdrawn 1994)
- ASTM-D3716 - Standard Test Methods for Use of Emulsion Polymers in Floor Polishes
- ASTM-D3751 - Standard Practice for Evaluation of Furniture Polish
- ASTM-D3757 - Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
- ASTM-D3758 - Standard Practice for Evaluation of Spray-Buff Products on Test Floors
- ASTM-D3790 - Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying
- ASTM-D3836 - Standard Practice for Evaluation of Automotive Polish
- ASTM-D3837 - Standard Practice for Preparing a Solution of Alkali–Soluble Resins
- ASTM-D3897 - Standard Test Method for Calculation of Basicity of Chrome Tanning Liquors
- ASTM-D3898 - Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors
- ASTM-D3913 - Standard Test Method for Acidity in Basic Chromium Tanning Liquors
- ASTM-D3954 - Standard Test Method for Dropping Point of Waxes
- ASTM-D4002 - Standard Practice for Evaluation of Buffable Shoe Polish
- ASTM-D4008 - Standard Guide for Measuring Anti-Soil Deposition Properties of Laundry Detergents
- ASTM-D4009 - Standard Guide for Foam Stability of Hand Dishwashing Detergents
- ASTM-D4011 - Standard Specification for Lotion Soap (Withdrawn 2000)
- ASTM-D4078 - Standard Specification for Water Emulsion Floor Polish
- ASTM-D4095 - Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
- ASTM-D4103 - Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
- ASTM-D4224 - Test Method for Anionic Detergent by Para-Toluidine Hydrochloride (Withdrawn 1995)
- ASTM-D4251 - Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
- ASTM-D4252 - Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
- ASTM-D4265 - Standard Guide for Evaluating Stain Removal Performance in Home Laundering
- ASTM-D4283 - Standard Test Method for Viscosity of Silicone Fluids
- ASTM-D4330 - Standard Practice for Evaluation of Fiberglass Boat Polish and Wax
- ASTM-D4337 - Standard Test Methods for Analysis of Linear Detergent Alkylates
- ASTM-D4386 - Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring
- ASTM-D4488 - Standard Guide for Testing Cleaning Performance of Products Intended for Use on Resilient Flooring and Washable Walls (Withdrawn 2009)
- ASTM-D456 - Standard Specification for Caustic Soda (Anhydrous) (Withdrawn 2001)
- ASTM-D457 - Standard Specification for Modified Soda (Sesquicarbonate Type) (Withdrawn 2001)
- ASTM-D4576 - Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
- ASTM-D458 - Standard Specification for Soda Ash (Withdrawn 2001)
- ASTM-D459 - Standard Terminology Relating to Soaps and Other Detergents
- ASTM-D460 - Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products (Withdrawn 2023)
- ASTM-D4608 - Standard Test Method for Citrate in Detergents
- ASTM-D4653 - Standard Test Method for Total Chlorides in Leather
- ASTM-D4654 - Standard Test Method for Sulfate Basicity in Leather
- ASTM-D4655 - Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)
- ASTM-D4704 - Standard Test Method for Tearing Strength, Tongue Tear of Leather
- ASTM-D4705 - Standard Test Method for Stitch Tear Strength of Leather, Double Hole
- ASTM-D4711 - Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids
- ASTM-D4786 - Standard Test Method for Stitch Tear Strength, Single Hole
- ASTM-D4831 - Standard Test Method for Buckle Tear Strength of Leather
- ASTM-D4899 - Standard Practice for Analysis of Vegetable Tanning Materials—General
- ASTM-D4900 - Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts
- ASTM-D4901 - Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
- ASTM-D4902 - Standard Test Method for Evaporation and Drying of Analytical Solutions
- ASTM-D4903 - Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
- ASTM-D4904 - Standard Practice for Cooling of Analytical Solutions
- ASTM-D4905 - Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
- ASTM-D4906 - Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
- ASTM-D4907 - Standard Test Method for Nitrocellulose in Finish on Leather
- ASTM-D4908 - Test Method For Tackiness Of Finish On Leather (Withdrawn 1997)
- ASTM-D4925 - Test Method for Flexibility and Adhesion of Finish on Leather (Withdrawn 1997)
- ASTM-D4954 - Standard Test Method for Determination of Nitrilotriacetates in Detergents
- ASTM-D4955 - Standard Practice for Field Evaluation of Automotive Polish
- ASTM-D500 - Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
- ASTM-D501 - Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
- ASTM-D502 - Standard Test Method for Particle Size of Soaps and Other Detergents
- ASTM-D5052 - Standard Test Method for Permeability of Leather to Water Vapor
- ASTM-D5053 - Standard Test Method for Colorfastness of Crocking of Leather
- ASTM-D5070 - Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations (Withdrawn 2023)
- ASTM-D5237 - Standard Guide for Evaluating Fabric Softeners
- ASTM-D5343 - Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners
- ASTM-D5346 - Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
- ASTM-D5347 - Standard Test Method for Determination of the Ash Content of Fats and Oils
- ASTM-D5348 - Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
- ASTM-D5349 - Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
- ASTM-D5350 - Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
- ASTM-D5351 - Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
- ASTM-D5352 - Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
- ASTM-D5353 - Standard Test Method for Determination of Total Desulfated Fatty Matter
- ASTM-D5354 - Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
- ASTM-D5355 - Standard Test Method for Specific Gravity of Oils and Liquid Fats
- ASTM-D5356 - Standard Test Method for pH of Chrome Tanning Solutions
- ASTM-D537 - Standard Specification for Sodium Metasilicate (Withdrawn 2001)
- ASTM-D538 - Standard Specification for Trisodium Phosphate (Withdrawn 2001)
- ASTM-D5439 - Standard Test Method for Determination of Sediment in Moellon
- ASTM-D5440 - Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM-D5547 - Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
- ASTM-D5548 - Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
- ASTM-D5551 - Standard Test Method for Determination of the Cloud Point of Oil
- ASTM-D5552 - Standard Test Method for Resistance of Colored Leather to Bleeding
- ASTM-D5553 - Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
- ASTM-D5554 - Standard Test Method for Determination of the Iodine Value of Fats and Oils
- ASTM-D5555 - Standard Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds
- ASTM-D5556 - Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fat Liquors and Softening Compounds
- ASTM-D5557 - Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
- ASTM-D5558 - Standard Test Method for Determination of the Saponification Value of Fats and Oils
- ASTM-D5559 - Standard Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils
- ASTM-D5560 - Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
- ASTM-D5562 - Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps
- ASTM-D5563 - Test Method for the Determination of the Total Alkalinity of Sulfonated or Sulfated Oils (Withdrawn 1995)
- ASTM-D5564 - Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
- ASTM-D5565 - Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils (Withdrawn 2020)
- ASTM-D5566 - Standard Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils (Withdrawn 2020)
- ASTM-D5678 - Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish
- ASTM-D5806 - Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration
- ASTM-D594 - Standard Specification for Sodium Sesquisilicate (Withdrawn 2001)
- ASTM-D595 - Standard Specification for Tetrasodium Pyrophosphate (Anhydrous) (Withdrawn 2001)
- ASTM-D6012 - Standard Test Method for Determination of Resistance of Leather to (Bleeding) Color Stain Transfer
- ASTM-D6013 - Standard Test Method for Determination of Area Stability of Leather to Laundering
- ASTM-D6014 - Standard Test Method for Determination of Dynamic Water Absorption of Leather Surfaces
- ASTM-D6015 - Standard Test Method for Static Water Absorption of Leather
- ASTM-D6016 - Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
- ASTM-D6017 - Standard Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather
- ASTM-D6018 - Standard Test Method for Determining the Presence of Lead Salts in Leather (Withdrawn 2017)
- ASTM-D6019 - Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
- ASTM-D6020 - Standard Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage
- ASTM-D6075 - Standard Test Method for Cracking Resistance of Leather
- ASTM-D6076 - Standard Test Method for Shrinkage Temperature of Leather
- ASTM-D6077 - Standard Test Method for Trapezoid Tearing Strength of Leather
- ASTM-D6116 - Standard Test Method for Blocking
- ASTM-D6173 - Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration (Withdrawn 2023)
- ASTM-D6174 - Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration (Withdrawn 2015)
- ASTM-D6182 - Standard Test Method for Flexibility and Adhesion of Finish on Leather
- ASTM-D6183 - Standard Test Method for Tackiness of Finish on Leather
- ASTM-D6205 - Standard Practice for Calibration of the James Static Coefficient of Friction Machine
- ASTM-D6215 - Standard Guide for Removal of Oily Soils from Metal Surfaces (Withdrawn 2004)
- ASTM-D6401 - Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials
- ASTM-D6402 - Standard Test Method for Determining Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
- ASTM-D6403 - Standard Test Method for Determining Moisture in Raw and Spent Materials
- ASTM-D6404 - Standard Practice for Sampling Vegetable Materials Containing Tannin
- ASTM-D6405 - Standard Practice for Extraction of Tannins from Raw and Spent Materials
- ASTM-D6406 - Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
- ASTM-D6407 - Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
- ASTM-D6408 - Standard Test Method for Analysis of Tannery Liquors
- ASTM-D6409 - Standard Practice for Color Tests with Sheepskin Skiver
- ASTM-D6410 - Standard Test Method for Determining Acidity of Vegetable Tanning Liquors
- ASTM-D6625 - Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
- ASTM-D6656 - Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
- ASTM-D6657 - Standard Test Method for pH of Wet Blue and Wet White
- ASTM-D6658 - Standard Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying
- ASTM-D6659 - Standard Practice for Sampling and Preparation of Wet Blue and Wet White for Physical and Chemical Tests
- ASTM-D6714 - Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)
- ASTM-D6715 - Standard Practice for Sampling and Preparation of Fresh or Salt-Preserved (Cured) Hides and Skins for Chemical and Physical Tests
- ASTM-D6716 - Standard Test Method for Total Ash in Wet Blue or Wet White
- ASTM-D6827 - Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
- ASTM-D7225 - Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors
- ASTM-D7255 - Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)
- ASTM-D7340 - Standard Practice for Thermal Conductivity of Leather
- ASTM-D7389 - Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes
- ASTM-D7476 - Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins
- ASTM-D7477 - Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
- ASTM-D7584 - Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber
- ASTM-D7674 - Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White
- ASTM-D7816 - Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins
- ASTM-D7817 - Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins
- ASTM-D7818 - Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins
- ASTM-D7819 - Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins
- ASTM-D7912 - Standard Test Method for Resistance of Finish to Heat Aging (Finish Stability)
- ASTM-D7967 - Standard Test Method for Analysis of Chrome Content (as Cr
2 O3 ) in Wet Blue using Atomic Absorption or ICP - ASTM-D800 - Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions (Withdrawn 2023)
- ASTM-D8041 - Standard Test Method for Whole Boot Breathability (MVTR)
- ASTM-D8042 - Test Method for Shrinkage Temperature of Wet Blue and Wet White
- ASTM-D8137 - Practice for Accelerated Aging of Leather
- ASTM-D820 - Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
- ASTM-D8284 - Standard Test Method for Determination of the Total Alkalinity in Sulfated, Sulfonated Oils and Fatliquors
- ASTM-D8365 - Standard Test Method for Corrosion of Metal Produced by Contact with Leather
- ASTM-D8451 - Standard Test Method for Calculation of Unfixed Chrome Concentration in Wet Blue
- ASTM-D8549 - Standard Guide for Testing Cleaning Performance of Hand Dishwashing Detergents
- ASTM-D928 - Standard Specification for Sodium Bicarbonate
- ASTM-D929 - Standard Specification for Borax (Withdrawn 2001)
- ASTM-D930 - Standard Test Method of Total Immersion Corrosion Test of Water-Soluble Aluminum Cleaners (Withdrawn 2001)
- ASTM-E141 - Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
- ASTM-E1907 - Standard Guide to Methods of Evaluating Moisture Conditions of Concrete Floors to Receive Resilient Floor Coverings (Withdrawn 2008)
- ASTM-F1037 - Standard Test Method for Visual Rating of Appearance of Resilient Floors
- ASTM-F1066 - Standard Specification for Vinyl Composition Floor Tile
- ASTM-F1102 - Guide for Preparation of Use and Care Booklets for Residential Resilient Nontextile Floor Coverings (Withdrawn 2000)
- ASTM-F1265 - Standard Test Method for Resistance to Impact for Resilient Floor Tile
- ASTM-F1289 - Practice for Development of Literature Pertaining to the Selection of Residential Resilient Floor Coverings (Withdrawn 2000)
- ASTM-F1303 - Standard Specification for Sheet Vinyl Floor Covering with Backing
- ASTM-F1304 - Standard Test Method for Deflection of Resilient Floor Tile
- ASTM-F1344 - Standard Specification for Rubber Floor Tile
- ASTM-F137 - Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
- ASTM-F141 - Standard Terminology Relating to Resilient Floor Coverings
- ASTM-F142 - Standard Test Method for Indentation of Resilient Floor Tiles (Mcburney Test) (Withdrawn 2007)
- ASTM-F1480 - Guide for Preparing a Chart for Presenting Residential Resilient Floor Covering Information to the Consumer (Withdrawn 2000)
- ASTM-F1482 - Standard Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring
- ASTM-F150 - Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
- ASTM-F1514 - Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
- ASTM-F1515 - Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
- ASTM-F1516 - Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
- ASTM-F1700 - Standard Specification for Solid Vinyl Floor Tile
- ASTM-F1859 - Standard Specification for Rubber Sheet Floor Covering Without Backing
- ASTM-F1860 - Standard Specification for Rubber Sheet Floor Covering With Backing
- ASTM-F1861 - Standard Specification for Resilient Wall Base
- ASTM-F1869 - Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
- ASTM-F1913 - Standard Specification for Vinyl Sheet Floor Covering Without Backing
- ASTM-F1914 - Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
- ASTM-F2034 - Standard Specification for Sheet Linoleum Floor Covering
- ASTM-F2055 - Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
- ASTM-F2169 - Standard Specification for Resilient Stair Treads
- ASTM-F2170 - Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
- ASTM-F2195 - Standard Specification for Linoleum Floor Tile
- ASTM-F2199 - Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
- ASTM-F2419 - Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
- ASTM-F2420 - Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood (Withdrawn 2014)
- ASTM-F2421 - Standard Test Method for Measurement of Resilient Floor Plank by Dial Gauge
- ASTM-F2471 - Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
- ASTM-F2659 - Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
- ASTM-F2678 - Standard Practice for Preparing Panel Underlayments, Thick Poured Gypsum Concrete Underlayments, Thick Poured Lightweight Cellular Concrete Underlayments, and Concrete Subfloors with Underlayment Patching Compounds to Receive Resilient Flooring
- ASTM-F2753 - Standard Practice to Evaluate the Effect of Dynamic Rolling Load over Resilient Floor Covering System
- ASTM-F2873 - Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring
- ASTM-F2982 - Standard Specification for Polyester Composition Floor Tile
- ASTM-F3008 - Standard Specification for Cork Floor Tile
- ASTM-F3009 - Standard Specification for Polyolefin Composition Floor Tile
- ASTM-F3010 - Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings
- ASTM-F3041 - Standard Specification for Bonded Rubber Crumb Floor Coverings
- ASTM-F3191 - Standard Practice for Field Determination of Substrate Water Absorption (Porosity) for Substrates to Receive Resilient Flooring
- ASTM-F3261 - Standard Specification for Resilient Flooring in Modular Format with Rigid Polymeric Core
- ASTM-F3311 - Standard Practice for Mat Bond Evaluation of Performance and Compatibility for Resilient Flooring System Components Prior to Installation
- ASTM-F3403 - Standard Specification for Heterogeneous Polyurethane Sheet Flooring
- ASTM-F3404 - Standard Specification for Heterogeneous Polyurethane Tile or Plank Flooring
- ASTM-F3414 - Standard Test Method for Determining Ortho-Phthalate Concentration in Flooring Containing Polyvinyl Chloride
- ASTM-F3441 - Standard Guide for Measurement of pH Involving Flooring Installations
- ASTM-F3513 - Standard Practice for Single Component, Fluid-Applied Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings
- ASTM-F373 - Standard Test Method for Embossed Depth of Resilient Floor Coverings
- ASTM-F386 - Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
- ASTM-F387 - Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
- ASTM-F410 - Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
- ASTM-F499 - Recommended Practice for Installation of Wood Underlayment and Preparation of the Surface to Receive Resilient Flooring (Withdrawn 1992)
- ASTM-F510 - Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
- ASTM-F511 - Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
- ASTM-F536 - Standard Test Method for Size of Resilient Floor Tile by Dial Gage Method (Withdrawn 2004)
- ASTM-F540 - Standard Test Method for Squareness of Resilient Floor Tile by Dial Gage Method (Withdrawn 2004)
- ASTM-F693 - Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
- ASTM-F710 - Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
- ASTM-F924 - Standard Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings
- ASTM-F925 - Standard Test Method for Resistance to Chemicals of Resilient Flooring
- ASTM-F970 - Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading