14.02: General Test Methods; Forensic Psychophysiology; Forensic Sciences; Terminology; Conformity Assessment; Statistical Methods; Nanotechnology; Forensic Engineering; Manufacture of Pharmaceutical Products
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-B95 - Method of Linear Expansion of Metals
- ASTM-C523 - Method of Test for Light Reflectance of Acoustical Materials by the Integrating Sphere Reflectometer (Withdrawn 1988)
- ASTM-D4356 - Standard Practice for Establishing Consistent Test Method Tolerances (Withdrawn 2007)
- ASTM-E1020 - Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation (Withdrawn 2022)
- ASTM-E105 - Standard Practice for Probability Sampling of Materials
- ASTM-E1088 - Definitions of Terms Relating to Atomizing Devices (Withdrawn 1997)
- ASTM-E11 - Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
- ASTM-E1131 - Standard Test Method for Compositional Analysis by Thermogravimetry
- ASTM-E1138 - Terminology of Technical Aspects of Products Liability Litigation (Withdrawn 1995)
- ASTM-E1142 - Standard Terminology Relating to Thermophysical Properties
- ASTM-E1169 - Standard Practice for Conducting Ruggedness Tests
- ASTM-E1187 - Standard Terminology Relating to Conformity Assessment (Withdrawn 2006)
- ASTM-E1188 - Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
- ASTM-E122 - Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
- ASTM-E1224 - Standard Guide for Categorizing Fields of Capability for Laboratory Accreditation Purposes (Withdrawn 2002)
- ASTM-E1225 - Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
- ASTM-E1226 - Standard Test Method for Explosibility of Dust Clouds
- ASTM-E1231 - Standard Practice for Calculation of Hazard Potential Figures of Merit for Thermally Unstable Materials
- ASTM-E1232 - Standard Test Method for Temperature Limit of Flammability of Chemicals
- ASTM-E1260 - Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
- ASTM-E1267 - Guide for ASTM Standard Specification Quality Statements (Withdrawn 1996)
- ASTM-E1269 - Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM-E1285 - Standard Guide for Identification of Bacteriophage Lambda (λ) or Its DNA (Withdrawn 2014)
- ASTM-E1286 - Standard Guide for Identification of Herpes Simplex Virus or Its DNA (Withdrawn 2014)
- ASTM-E1296 - Terminology Relating to Liquid Particle Statistics (Withdrawn 1997)
- ASTM-E1298 - Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products (Withdrawn 2014)
- ASTM-E1301 - Standard Guide for Proficiency Testing by Interlaboratory Comparisons (Withdrawn 2003)
- ASTM-E1322 - Guide for Selection, Training and Evaluation of Assessors for Laboratory Accreditation Systems (Withdrawn 1999)
- ASTM-E1323 - Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
- ASTM-E1325 - Standard Terminology Relating to Design of Experiments
- ASTM-E1356 - Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- ASTM-E1363 - Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM-E1385 - Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Steam Distillation (Withdrawn 2009)
- ASTM-E1386 - Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
- ASTM-E1387 - Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography (Withdrawn 2010)
- ASTM-E1388 - Standard Practice for Static Headspace Sampling of Vapors from Fire Debris Samples
- ASTM-E1389 - Standard Practice for Cleanup of Fire Debris Sample Extracts by Acid Stripping (Withdrawn 2003)
- ASTM-E1402 - Standard Guide for Sampling Design
- ASTM-E141 - Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
- ASTM-E1412 - Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Activated Charcoal
- ASTM-E1413 - Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration onto an Adsorbent Tube
- ASTM-E1422 - Standard Guide for Test Methods for Forensic Writing Ink Comparison (Withdrawn 2014)
- ASTM-E1445 - Standard Terminology Relating to Hazard Potential of Chemicals
- ASTM-E1458 - Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
- ASTM-E1459 - Standard Practice for Physical Evidence Labeling and Related Documentation
- ASTM-E1461 - Standard Test Method for Thermal Diffusivity by the Flash Method
- ASTM-E1470 - Standard Test Method for Characterization of Proteins by Electrophoretic Mobility (Withdrawn 2014)
- ASTM-E1488 - Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
- ASTM-E1491 - Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
- ASTM-E1492 - Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
- ASTM-E1493 - Standard Guide for Identification of Bacteriophage M13 or Its DNA (Withdrawn 2014)
- ASTM-E1515 - Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
- ASTM-E1530 - Standard Test Method for Evaluating the Resistance to Thermal Transmission by the Guarded Heat Flow Meter Technique
- ASTM-E1531 - Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Growth on Agarose Medium (Withdrawn 2014)
- ASTM-E1532 - Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Use of Bisbenzamide DNA-Binding Fluorochrome (Withdrawn 2014)
- ASTM-E1533 - Standard Practice for Indirect Detection of Mycoplasma in Cell Culture by 4`-6-Diamidino-2-2 Phenylindole (DAPI) Staining (Withdrawn 2014)
- ASTM-E1536 - Standard Practice for Detection of Mycoplasma Contamination of Bovine Serum by Large Volume Method (Withdrawn 2014)
- ASTM-E1545 - Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
- ASTM-E1564 - Standard Guide for Design and Maintenance of Low-Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials
- ASTM-E1565 - Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures
- ASTM-E1566 - Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen
- ASTM-E1579 - Standard Guide for Ensuring Data Integrity in Highly Computerized Laboratory Operations (Withdrawn 2002)
- ASTM-E1580 - Standard Guide for Surveillance of Accredited Laboratories (Withdrawn 2008)
- ASTM-E1582 - Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
- ASTM-E1588 - Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
- ASTM-E161 - Standard Specification for Electroformed Material and Test Sieves
- ASTM-E1610 - Standard Guide for Forensic Paint Analysis and Comparison
- ASTM-E1617 - Standard Practice for Reporting Particle Size Characterization Data
- ASTM-E1618 - Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
- ASTM-E1620 - Standard Terminology Relating to Liquid Particles and Atomization
- ASTM-E1626 - Standard Guide for Including Government Procurement Requirements in ASTM Documents (Withdrawn 2007)
- ASTM-E1638 - Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
- ASTM-E1640 - Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM-E1641 - Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
- ASTM-E1658 - Standard Terminology for Expressing Conclusions of Forensic Document Examiners (Withdrawn 2017)
- ASTM-E1719 - Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
- ASTM-E1732 - Standard Terminology Relating to Forensic Science
- ASTM-E1738 - Standard Guide for Development of a Directory of Accredited Laboratories by an Accrediting Body (Withdrawn 2004)
- ASTM-E1759 - Standard Test Method for Isoaspartic Acid in Proteins: Method for the Determination of Asparagine Deamidation Products (Withdrawn 2003)
- ASTM-E177 - Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
- ASTM-E178 - Standard Practice for Dealing With Outlying Observations
- ASTM-E1782 - Standard Test Method for Determining Vapor Pressure by Thermal Analysis
- ASTM-E1789 - Standard Guide for Writing Ink Identification (Withdrawn 2013)
- ASTM-E1824 - Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
- ASTM-E1843 - Standard Guide for Sexual Violence Investigation, Examination, and Evidence Collection Protocol
- ASTM-E1858 - Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
- ASTM-E1860 - Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
- ASTM-E1867 - Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM-E1868 - Standard Test Methods for Loss-On-Drying by Thermogravimetry
- ASTM-E1873 - Standard Guide for Detection of Nucleic Acid Sequences by the Polymerase Chain Reaction Technique (Withdrawn 2014)
- ASTM-E1877 - Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
- ASTM-E1884 - Standard Guide for General Requirements for Bodies Operating Assessment and Certification/Registration of Quality Systems (Withdrawn 2004)
- ASTM-E1904 - Guide for General Criteria for a Supplier's Declaration of Conformity (Withdrawn 2004)
- ASTM-E1905 - Guide for General Requirements for Assessment and Accreditation of Certification/Registration Bodies (Withdrawn 2004)
- ASTM-E1906 - Standard Guide for General Requirements for Bodies Operating Product Certification Systems (Withdrawn 2004)
- ASTM-E1919 - Standard Guide for Worldwide Published Standards Relating to Particle and Spray Characterization (Withdrawn 2014)
- ASTM-E1952 - Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM-E1953 - Standard Practice for Description of Thermal Analysis and Rheology Apparatus
- ASTM-E1954 - Standard Practice for Conduct of Research in Psychophysiological Detection of Deception (Polygraph)
- ASTM-E1964 - Standard Practice for Compiling and Writing & Terminology (Withdrawn 2007)
- ASTM-E1967 - Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
- ASTM-E1968 - Standard Practice for Microcrystal Testing in Forensic Analysis for Cocaine
- ASTM-E1969 - Standard Practice for Microcrystal Testing in Forensic Analysis for Methamphetamine and Amphetamine
- ASTM-E1970 - Standard Practice for Statistical Treatment of Thermoanalytical Data
- ASTM-E1981 - Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
- ASTM-E1992 - Standard Terminology Relating to Terminology Management (Withdrawn 2007)
- ASTM-E1994 - Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
- ASTM-E20 - Practice for Particle Size Analysis of Particulate Substances in the Range of 0.2 to 75 UM by Optical Microscopy (Withdrawn 1994)
- ASTM-E2000 - Standard Guide for Minimum Basic Education and Training of Individuals Involved in the Detection of Deception (PDD) (Withdrawn 2014)
- ASTM-E2008 - Standard Test Methods for Volatility Rate by Thermogravimetry
- ASTM-E2009 - Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
- ASTM-E2012 - Standard Guide for the Preparation of a Binary Chemical Compatibility Chart
- ASTM-E2016 - Standard Specification for Industrial Woven Wire Cloth
- ASTM-E2019 - Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air
- ASTM-E2021 - Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
- ASTM-E2031 - Standard Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) Examinations
- ASTM-E2035 - Standard Terminology Relating to Forensic Psychophysiology
- ASTM-E2038 - Standard Test Method for Temperature Calibration of Dielectric Analyzers (Withdrawn 2009)
- ASTM-E2039 - Standard Test Method for Determining and Reporting Dynamic Dielectric Properties (Withdrawn 2009)
- ASTM-E2040 - Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
- ASTM-E2041 - Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM-E2046 - Standard Test Method for Reaction Induction Time by Thermal Analysis
- ASTM-E2048 - Standard Guide for Detection of Nucleic Acids of the Mycobacterium Tuberculosis Complex and Other Pathogenic Mycobacteria by the Polymerase Chain Reaction Technique (Withdrawn 2014)
- ASTM-E2057 - Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Violence Investigations
- ASTM-E2062 - Standard Guide for PDD Examination Standards of Practice
- ASTM-E2063 - Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
- ASTM-E2064 - Standard Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD) (Withdrawn 2023)
- ASTM-E2065 - Standard Guide for Ethical Requirements for Psychophysiological Detection of Deception (PDD) Examiners (Withdrawn 2020)
- ASTM-E2069 - Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM-E2070 - Standard Test Methods for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
- ASTM-E2071 - Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
- ASTM-E2079 - Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
- ASTM-E2080 - Standard Guide for Clinical Psychophysiological Detection of Deception (PDD) Examinations for Sex Offenders (Withdrawn 2023)
- ASTM-E2092 - Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM-E2097 - Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products (Withdrawn 2022)
- ASTM-E2113 - Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM-E2123 - Standard Practice for Preservation of Evidence in Sexual Violence Investigation
- ASTM-E2124 - Standard Specification for Equipment and Supplies in Sexual Violence Investigations
- ASTM-E2125 - Standard Practice for Microcrystal Testing in Forensic Analysis for Phencyclidine and Its Analogues
- ASTM-E2154 - Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME) (Withdrawn 2024)
- ASTM-E2159 - Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts
- ASTM-E2160 - Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM-E2161 - Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
- ASTM-E2162 - Standard Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders (Withdrawn 2016)
- ASTM-E2163 - Standard Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs (Withdrawn 2023)
- ASTM-E2195 - Standard Terminology Relating to the Examination of Questioned Documents (Withdrawn 2018)
- ASTM-E2206 - Standard Test Method for Force Calibration of Thermomechanical Analyzers
- ASTM-E2224 - Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM-E2225 - Standard Guide for Forensic Examination of Fabrics and Cordage
- ASTM-E2227 - Standard Guide for Forensic Examination of Dyes in Textile Fibers by Thin-Layer Chromatography
- ASTM-E2228 - Standard Guide for Microscopical Examination of Textile Fibers
- ASTM-E2229 - Standard Practices for Interpretation of Psychophysiological Detection of Deception (Polygraph) Data
- ASTM-E2234 - Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL
- ASTM-E2253 - Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM-E2254 - Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
- ASTM-E228 - Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
- ASTM-E2281 - Standard Practice for Process Capability and Performance Measurement
- ASTM-E2282 - Standard Guide for Defining the Test Result of a Test Method
- ASTM-E2285 - Standard Guide for Examination of Mechanical Checkwriter Impressions (Withdrawn 2017)
- ASTM-E2286 - Standard Guide for Examination of Dry Seal Impressions (Withdrawn 2017)
- ASTM-E2287 - Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text (Withdrawn 2018)
- ASTM-E2288 - Standard Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations (Withdrawn 2018)
- ASTM-E2289 - Standard Guide for Examination of Rubber Stamp Impressions (Withdrawn 2017)
- ASTM-E2290 - Standard Guide for Examination of Handwritten Items (Withdrawn 2016)
- ASTM-E2291 - Standard Guide for Indentation Examinations (Withdrawn 2012)
- ASTM-E2292 - Standard Guide for Field Investigation of Carbon Monoxide Poisoning Incidents
- ASTM-E2324 - Standard Guide for PDD Paired Testing
- ASTM-E2325 - Standard Guide for Non-destructive Examination of Paper (Withdrawn 2014)
- ASTM-E2326 - Standard Practice for Education and Training of Seized-Drug Analysts (Withdrawn 2023)
- ASTM-E2327 - Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis (Withdrawn 2024)
- ASTM-E2328 - Standard Terminology Relating to Seized-Drug Analysis (Withdrawn 2005)
- ASTM-E2329 - Standard Practice for Identification of Seized Drugs
- ASTM-E2330 - Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
- ASTM-E2331 - Standard Guide for Examination of Altered Documents (Withdrawn 2013)
- ASTM-E2332 - Standard Practice for Investigation and Analysis of Physical Component Failures (Withdrawn 2004)
- ASTM-E2334 - Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-Conformities, Using Attribute Data, When There is a Zero Response in the Sample
- ASTM-E2345 - Standard Practice for Investigating Electrical Incidents (Withdrawn 2004)
- ASTM-E2347 - Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM-E2363 - Standard Terminology Relating to Manufacturing of Pharmaceutical and Biopharmaceutical Products in the Pharmaceutical and Biopharmaceutical Industry
- ASTM-E2386 - Standard Guide for Conduct of PDD Screening Examinations
- ASTM-E2388 - Standard Guide for Minimum Training Requirements for Forensic Document Examiners (Withdrawn 2020)
- ASTM-E2389 - Standard Guide for Examination of Documents Produced with Liquid Ink Jet Technology (Withdrawn 2014)
- ASTM-E2390 - Standard Guide for Examination of Documents Produced with Toner Technology (Withdrawn 2015)
- ASTM-E2402 - Standard Test Method for Mass Loss, Residue, and Temperature Measurement Validation of Thermogravimetric Analyzers
- ASTM-E2403 - Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
- ASTM-E2425 - Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
- ASTM-E2427 - Standard Test Method for Acceptance by Performance Testing for Test Sieves
- ASTM-E2439 - Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
- ASTM-E2451 - Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
- ASTM-E2456 - Standard Terminology Relating to Nanotechnology
- ASTM-E2474 - Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology (Withdrawn 2020)
- ASTM-E2475 - Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control
- ASTM-E2476 - Standard Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture
- ASTM-E2489 - Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
- ASTM-E2490 - Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
- ASTM-E2493 - Standard Guide for the Collection of Non-Volatile Memory Data in Evidentiary Vehicle Electronic Control Units (Withdrawn 2016)
- ASTM-E2494 - Standard Guide for Examination of Typewritten Items (Withdrawn 2017)
- ASTM-E2500 - Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
- ASTM-E2503 - Standard Practice for Qualification of Basket and Paddle Dissolution Apparatus
- ASTM-E2509 - Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
- ASTM-E2510 - Standard Test Method for Torque Calibration or Conformance of Rheometers
- ASTM-E2524 - Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
- ASTM-E2525 - Standard Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-Macrophage Colonies
- ASTM-E2526 - Standard Test Method for Evaluation of Cytotoxicity of Nanoparticulate Materials in Porcine Kidney Cells and Human Hepatocarcinoma Cells
- ASTM-E2535 - Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings
- ASTM-E2537 - Standard Guide for Application of Continuous Process Verification to Pharmaceutical and Biopharmaceutical Manufacturing
- ASTM-E2548 - Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
- ASTM-E2549 - Standard Practice for Validation of Seized-Drug Analytical Methods (Withdrawn 2023)
- ASTM-E2550 - Standard Test Method for Thermal Stability by Thermogravimetry
- ASTM-E2551 - Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
- ASTM-E2554 - Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
- ASTM-E2555 - Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection
- ASTM-E2578 - Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
- ASTM-E2584 - Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
- ASTM-E2585 - Standard Practice for Thermal Diffusivity by the Flash Method
- ASTM-E2586 - Standard Practice for Calculating and Using Basic Statistics
- ASTM-E2587 - Standard Practice for Use of Control Charts in Statistical Process Control
- ASTM-E2589 - Standard Terminology Relating to Nonsieving Methods of Powder Characterization
- ASTM-E2602 - Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
- ASTM-E2603 - Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
- ASTM-E2629 - Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems
- ASTM-E2651 - Standard Guide for Powder Particle Size Analysis
- ASTM-E2655 - Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
- ASTM-E2656 - Standard Practice for Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute
- ASTM-E2659 - Standard Practice for Certificate Programs
- ASTM-E2678 - Standard Guide for Education and Training in Computer Forensics (Withdrawn 2023)
- ASTM-E2696 - Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
- ASTM-E2698 - Standard Guide for Forensic Examination of Fabrics and Cordage
- ASTM-E2708 - Standard Terminology for Accreditation and Certification
- ASTM-E2709 - Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
- ASTM-E2710 - Standard Guide for Preservation of Charred Documents
- ASTM-E2711 - Standard Guide for Preservation of Liquid Soaked Documents
- ASTM-E2713 - Standard Guide to Forensic Engineering
- ASTM-E2716 - Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
- ASTM-E2744 - Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM-E2762 - Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL
- ASTM-E2763 - Standard Practice for Computer Forensics (Withdrawn 2019)
- ASTM-E2764 - Standard Practice for Uncertainty Assessment in the Context of Seized-Drug Analysis (Withdrawn 2020)
- ASTM-E2765 - Standard Practice for Use of Image Capture and Storage Technology in Forensic Document Examination
- ASTM-E2769 - Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM-E2776 - Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
- ASTM-E2781 - Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Calorimetry and Differential Scanning Calorimetry
- ASTM-E2782 - Standard Guide for Measurement Systems Analysis (MSA)
- ASTM-E2808 - Standard Guide for Microspectrophotometry in Forensic Paint Analysis
- ASTM-E2809 - Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
- ASTM-E2810 - Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units
- ASTM-E2814 - Standard Specification for Industrial Woven Wire Filter Cloth
- ASTM-E2819 - Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL
- ASTM-E2825 - Standard Guide for Forensic Digital Image Processing
- ASTM-E2833 - Standard Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction Activities and Materials Used in Construction, Including Special Inspection
- ASTM-E2834 - Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
- ASTM-E2849 - Standard Practice for Professional Certification Performance Testing
- ASTM-E2859 - Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
- ASTM-E2864 - Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
- ASTM-E2865 - Standard Guide for Measurement of Electrophoretic Mobility and Zeta Potential of Nanosized Biological Materials
- ASTM-E2872 - Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus
- ASTM-E2881 - Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry
- ASTM-E2882 - Standard Guide for Analysis of Clandestine Drug Laboratory Evidence
- ASTM-E2888 - Standard Practice for Process for Inactivation of Rodent Retrovirus by pH
- ASTM-E289 - Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
- ASTM-E2890 - Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
- ASTM-E2891 - Standard Guide for Multivariate Data Analysis in Pharmaceutical Development and Manufacturing Applications
- ASTM-E2898 - Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
- ASTM-E29 - Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
- ASTM-E2909 - Standard Guide for Investigation/Study/Assay Tab-Delimited Format for Nanotechnologies (ISA-TAB-Nano): Standard File Format for the Submission and Exchange of Data on Nanomaterials and Characterizations (Withdrawn 2021)
- ASTM-E2910 - Standard Guide for Preferred Methods for Acceptance of Product
- ASTM-E2916 - Standard Terminology for Digital and Multimedia Evidence Examination
- ASTM-E2917 - Standard Practice for Forensic Science Practitioner Training, Continuing Education, and Professional Development Programs
- ASTM-E2918 - Standard Test Method for Performance Validation of Thermomechanical Analyzers
- ASTM-E2926 - Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence (µ-XRF) Spectrometry
- ASTM-E2927 - Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
- ASTM-E2931 - Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
- ASTM-E2935 - Standard Practice for Evaluating Equivalence of Two Testing Processes
- ASTM-E2937 - Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
- ASTM-E2958 - Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
- ASTM-E2968 - Standard Guide for Application of Continuous Manufacturing (CM) in the Pharmaceutical Industry
- ASTM-E2975 - Standard Test Method for Calibration or Calibration Verification of Constant Speed Concentric Cylinder Rotational Viscometers
- ASTM-E2980 - Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
- ASTM-E2996 - Standard Guide for Workforce Education in Nanotechnology Health and Safety
- ASTM-E2997 - Standard Test Method for Analysis of Biodiesel Products by Gas Chromatography-Mass Spectrometry
- ASTM-E2998 - Standard Practice for Characterization and Classification of Smokeless Powder
- ASTM-E2999 - Standard Test Method for Analysis of Organic Compounds in Smokeless Powder by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy
- ASTM-E3001 - Standard Practice for Workforce Education in Nanotechnology Characterization
- ASTM-E3007 - Standard Practice for Selection and Use of Kinetic Reference Values in the Study of Decomposition Reactions by Thermogravimetry
- ASTM-E3016 - Standard Guide for Establishing Confidence in Digital and Multimedia Evidence Forensic Results by Error Mitigation Analysis
- ASTM-E3017 - Standard Practice for Examining Magnetic Card Readers
- ASTM-E3025 - Standard Guide for Tiered Approach to Detection and Characterization of Silver Nanomaterials in Textiles
- ASTM-E3034 - Standard Guide for Workforce Education in Nanotechnology Pattern Generation
- ASTM-E3042 - Standard Practice for Process Step to Inactivate Rodent Retrovirus with Triton X-100 Treatment
- ASTM-E3046 - Standard Guide for Core Competencies for Mobile Phone Forensics (Withdrawn 2024)
- ASTM-E3059 - Standard Guide for Workforce Education in Nanotechnology Infrastructure
- ASTM-E3071 - Standard Guide for Nanotechnology Workforce Education in Materials Synthesis and Processing
- ASTM-E3085 - Standard Guide for Fourier Transform Infrared Spectroscopy in Forensic Tape Examinations
- ASTM-E3089 - Standard Guide for Nanotechnology Workforce Education in Material Properties and Effects of Size
- ASTM-E3115 - Standard Guide for Capturing Facial Images for Use with Facial Recognition Systems
- ASTM-E3143 - Standard Practice for Performing Cryo-Transmission Electron Microscopy of Liposomes
- ASTM-E3144 - Standard Guide for Reporting the Physical and Chemical Characteristics of Nano-Objects
- ASTM-E3148 - Standard Guide for Postmortem Facial Image Capture
- ASTM-E3149 - Standard Guide for Facial Image Comparison Feature List for Morphological Analysis
- ASTM-E3150 - Standard Guide for Forensic Audio Laboratory Setup and Maintenance
- ASTM-E3171 - Standard Test Method for Determination of Total Silver in Textiles by ICP-OES or ICP-MS Analysis
- ASTM-E3172 - Standard Guide for Reporting Production Information and Data for Nano-Objects
- ASTM-E3175 - Standard Practice for Training in the Forensic Examination of Hair by Microscopy
- ASTM-E3176 - Standard Guide for Forensic Engineering Expert Reports
- ASTM-E3189 - Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Static Headspace Concentration onto an Adsorbent Tube
- ASTM-E3196 - Standard Terminology Relating to the Examination of Explosives
- ASTM-E3197 - Standard Terminology Relating to Examination of Fire Debris
- ASTM-E3220 - Standard Guide for Characterization of Graphene Flakes
- ASTM-E323 - Standard Specification for Perforated-Plate Sieves for Testing Purposes
- ASTM-E3233 - Standard Practice for Forensic Tape Analysis Training Program
- ASTM-E3234 - Standard Practice for Forensic Paint Analysis Training Program
- ASTM-E3235 - Standard Practice for Latent Print Evidence Imaging Resolution
- ASTM-E3238 - Standard Test Method for Quantitative Measurement of the Chemoattractant Capacity of a Nanoparticulate Material
in vitro - ASTM-E3245 - Standard Guide for Systematic Approach to the Extraction, Analysis, and Classification of Ignitable Liquids and Ignitable Liquid Residues in Fire Debris Samples
- ASTM-E3247 - Standard Test Method for Measuring the Size of Nanoparticles in Aqueous Media Using Dynamic Light Scattering
- ASTM-E3253 - Standard Practice for Establishing an Examination Scheme for Intact Explosives
- ASTM-E3254 - Standard Practice for Use of Color in the Visual Examination and Forensic Comparison of Soil Samples
- ASTM-E3255 - Standard Practice for Quality Assurance of Forensic Science Service Providers Performing Forensic Chemical Analysis
- ASTM-E3260 - Standard Guide for Forensic Examination and Comparison of Pressure Sensitive Tapes
- ASTM-E3269 - Standard Test Method for Determination of the Mass Fraction of Particle-Bound Gold in Colloidal Gold Suspensions
- ASTM-E3272 - Standard Guide for Collection of Soils and Other Geological Evidence for Criminal Forensic Applications
- ASTM-E3275 - Standard Guide for Visualization and Identification of Nanomaterials in Biological and Nonbiological Matrices Using Darkfield Microscopy/Hyperspectral Imaging (DFM/HSI) Analysis
- ASTM-E3278 - Standard Test Method for Bubble Point Pressure of Woven Wire Filter Cloth
- ASTM-E3284 - Standard Practice for Training in the Forensic Examination of Primer Gunshot Residue (pGSR) Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
- ASTM-E3294 - Standard Guide for Forensic Analysis of Geological Materials by Powder X-Ray Diffraction
- ASTM-E3295 - Standard Guide for Using Micro X-Ray Fluorescence (μ-XRF) in Forensic Polymer Examinations
- ASTM-E3296 - Standard Guide for Using Pyrolysis Gas Chromatography and Pyrolysis Gas Chromatography-Mass Spectrometry in Forensic Polymer Examinations
- ASTM-E3297 - Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with a Charged Aerosol Detector (CAD)
- ASTM-E3307 - Standard Practice for the Collection and Preservation of Organic Gunshot Residue (OGSR)
- ASTM-E3309 - Standard Guide for Reporting of Forensic Primer Gunshot Residue (pGSR) Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
- ASTM-E3315 - Standard Specification for Certification of Metallic Materials
- ASTM-E3316 - Standard Guide for Forensic Examination of Hair by Microscopy
- ASTM-E3323 - Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative Light-Scattering Detector (ELSD)
- ASTM-E3324 - Standard Test Method for Lipid Quantitation in Liposomal Formulations Using Ultra-High-Performance Liquid Chromatography (UHPLC) with Triple Quadrupole Mass Spectrometry (TQMS)
- ASTM-E3329 - Standard Practice for Establishing an Examination Scheme for Explosive Residues
- ASTM-E3338 - Standard Guide for Size and Shape of Solid Particles, Liquid Droplets, and Gas Bubbles, Dynamically Conveyed, Using a Dynamic Imaging Analyzer
- ASTM-E3340 - Standard Guide for Development of Laser Diffraction Particle Size Analysis Methods for Powder Materials
- ASTM-E3351 - Standard Test Method for Detection of Nitric Oxide Production
In Vitro - ASTM-E3391 - Standard Terminology Relating to Gunshot Residue Analysis (GSR)
- ASTM-E3392 - Standard Guide for Forensic Physical Fit Examination
- ASTM-E3406 - Standard Guide for Microspectrophotometry in Forensic Fiber Analysis
- ASTM-E3409 - Standard Test Method for Analysis of Liposomal Drug Formulations Using Multidetector Asymmetrical-Flow Field-Flow Fractionation
- ASTM-E3416 - Standard Practice for Competency-based Work-based Learning Programs
- ASTM-E3423 - Standard Guide for Forensic Analysis of Explosives By Polarized Light Microscopy
- ASTM-E3427 - Standard Guide for Measuring Intensity, Polydispersity, Size, Zeta Potential, Molecular Weight, and Concentration of Nanoparticles in Liquid Suspension Using Laser-Amplified Detection/Power Spectrum Analysis (LAD/PSA) Technology
- ASTM-E3445 - Standard Practice for Image Processing to Improve Automated Facial Recognition Search Performance
- ASTM-E437 - Specification for Industrial Wire Cloth and Screens (Square Opening Series) (Withdrawn 2000)
- ASTM-E444 - Standard Guide for Scope of Work of Forensic Document Examiners (Withdrawn 2018)
- ASTM-E454 - Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
- ASTM-E456 - Standard Terminology Relating to Quality and Statistics
- ASTM-E473 - Standard Terminology Relating to Thermal Analysis and Rheology
- ASTM-E476 - Standard Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test) (Withdrawn 2008)
- ASTM-E487 - Standard Test Method for Constant-Temperature Stability of Chemical Materials
- ASTM-E502 - Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
- ASTM-E537 - Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry
- ASTM-E541 - Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building (Withdrawn 2019)
- ASTM-E548 - Standard Guide for General Criteria Used for Evaluating Laboratory Competence
- ASTM-E582 - Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
- ASTM-E620 - Standard Practice for Reporting Opinions of Scientific or Technical Experts
- ASTM-E651 - Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building (Withdrawn 2017)
- ASTM-E659 - Standard Test Method for Autoignition Temperature of Chemicals
- ASTM-E674 - Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
- ASTM-E678 - Standard Practice for Evaluation of Scientific or Technical Data (Withdrawn 2022)
- ASTM-E680 - Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
- ASTM-E681 - Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
- ASTM-E691 - Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM-E698 - Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
- ASTM-E699 - Standard Specification for Agencies Involved in Testing, Quality Assurance, and Evaluating of Manufactured Building Components
- ASTM-E735 - Specification for Minimum Performance Standards for Hand Held Pipettors with Pipet Tips (Withdrawn 1987)
- ASTM-E771 - Standard Test Method for Spontaneous Heating Tendency of Materials (Withdrawn 2001)
- ASTM-E789 - Standard Test Method for Dust Explosions in a 1.2-Litre Closed Cylindrical Vessel (Withdrawn 2007)
- ASTM-E793 - Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM-E794 - Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
- ASTM-E799 - Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
- ASTM-E831 - Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM-E860 - Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation
- ASTM-E891 - Tables for Terrestrial Direct Normal Solar Spectral Irradiance Tables for Air Mass 1.5 (Withdrawn 1999)
- ASTM-E918 - Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
- ASTM-E928 - Standard Test Method for Purity by Differential Scanning Calorimetry
- ASTM-E967 - Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM-E968 - Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters (Withdrawn 2023)
- ASTM-E994 - Standard Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition (Withdrawn 2004)
- ASTM-F322 - Method for Determining the Quality of Calibration Particles for Automatic Particle Counters (Withdrawn 1990)
- ASTM-F328 - Standard Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical Particles (Withdrawn 2007)
- ASTM-F490 - Method for Microscopical Sizing and Counting Particles on Membrane Filters Using Image Shear (Withdrawn 1992)
- ASTM-F649 - Standard Practice for Secondary Calibration of Airborne Particle Counter Using Comparison Procedures (Withdrawn 2007)
- ASTM-F658 - Standard Practice for Calibration of a Liquid-Borne Particle Counter Using an Optical System Based Upon Light Extinction (Withdrawn 2007)
- ASTM-F838 - Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
- ASTM-G89 - Methods for Cathodic Disbonding of Pipeline Coatings Subjected to Cyclic Temperatures (Withdrawn 1992)