04.03: Road and Paving Materials; Vehicle-Pavement Systems
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C1252 - Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
- ASTM-C396 - Method of Test for Compressive Strength of Chemically Setting Silicate and Silica Chemical-Resistant Mortars (Withdrawn 1982)
- ASTM-D1073 - Standard Specification for Fine Aggregate for Asphalt Paving Mixtures
- ASTM-D1074 - Standard Test Method for Compressive Strength of Asphalt Mixtures
- ASTM-D1075 - Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures (Withdrawn 2019)
- ASTM-D113 - Standard Test Method for Ductility of Asphalt Materials
- ASTM-D1139 - Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
- ASTM-D1188 - Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
- ASTM-D1190 - Standard Specification for Concrete Joint Sealer, Hot-Applied Elastic Type (Withdrawn 2002)
- ASTM-D1191 - Standard Test Method for Concrete Joint Sealers (Withdrawn 1996)
- ASTM-D1195 - Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
- ASTM-D1196 - Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
- ASTM-D1369 - Standard Practice for Quantities of Materials for Asphalt-Aggregate Surface Treatments
- ASTM-D139 - Standard Test Method for Float Test for Bituminous Materials
- ASTM-D140 - Standard Practice for Sampling Asphalt Materials
- ASTM-D1461 - Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures
- ASTM-D1559 - Test Method for Resistance of Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (Withdrawn 1998)
- ASTM-D1560 - Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus (Withdrawn 2024)
- ASTM-D1561 - Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor (Withdrawn 2022)
- ASTM-D1664 - Test Method for Coating and Stripping of Bitumen-Aggregate Mixtures (Withdrawn 1992)
- ASTM-D1665 - Standard Test Method for Engler Specific Viscosity of Tar Products (Withdrawn 2023)
- ASTM-D1751 - Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Asphalt Types)
- ASTM-D1752 - Standard Specification for Preformed Sponge Rubber, Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM-D1754 - Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
- ASTM-D1850 - Specification for Concrete Joint Sealer Cold-Application Type (Withdrawn 1989)
- ASTM-D1851 - Methods of Testing Concrete Joint Sealers, Cold-Application Type
- ASTM-D1854 - Standard Specification for Jet-Fuel-Resistant Concrete Joint Sealer, Hot-Applied Elastic Type
- ASTM-D1855 - Test Methods for Jet-Fuel-Resistant Concrete Joint Sealer, Hot-Poured Elastic Type (Withdrawn 1996)
- ASTM-D1856 - Standard Test Method for Recovery of Asphalt from Solution by Abson Method
- ASTM-D1985 - Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
- ASTM-D20 - Standard Test Method for Distillation of Road Tars
- ASTM-D2026 - Standard Specification for Cutback Asphalt (Slow-Curing Type)
- ASTM-D2027 - Standard Specification for Cutback Asphalt (Medium-Curing Type)
- ASTM-D2028 - Standard Specification for Cutback Asphalt (Rapid-Curing Type)
- ASTM-D2041 - Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures
- ASTM-D2042 - Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene
- ASTM-D2170 - Standard Test Method for Kinematic Viscosity of Asphalts
- ASTM-D2171 - Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
- ASTM-D2172 - Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures
- ASTM-D2397 - Standard Specification for Cationic Emulsified Asphalt
- ASTM-D2399 - Standard Practice for Selection of Cutback Asphalts
- ASTM-D2419 - Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
- ASTM-D242 - Standard Specification for Mineral Filler for Asphalt Mixtures
- ASTM-D243 - Standard Test Method for Residue of Specified Penetration
- ASTM-D244 - Standard Test Methods and Practices for Emulsified Asphalts
- ASTM-D2489 - Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures
- ASTM-D2493 - Standard Practice for Viscosity-Temperature Chart for Asphalt Binders
- ASTM-D2628 - Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
- ASTM-D2726 - Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
- ASTM-D2728 - Standard Practice for Paving Uses and Application Temperatures for Road Tars (Withdrawn 2023)
- ASTM-D2828 - Standard Specification for Nonbituminous Inserts for Contraction Joints in Portland Cement Concrete Airfield Pavements, Sawable Type (Withdrawn 2004)
- ASTM-D2835 - Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
- ASTM-D2872 - Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
- ASTM-D290 - Standard Practice for Bituminous Mixing Plant Inspection (Withdrawn 2000)
- ASTM-D2940 - Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
- ASTM-D2950 - Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
- ASTM-D2993 - Standard Specification for Acrylonitrile-Butadiene Rubberized Tar (Withdrawn 2003)
- ASTM-D2994 - Standard Test Methods for Rubberized Tar (Withdrawn 2000)
- ASTM-D2995 - Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors
- ASTM-D3042 - Standard Test Method for Insoluble Residue in Carbonate Aggregates
- ASTM-D3141 - Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
- ASTM-D3142 - Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
- ASTM-D3143 - Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
- ASTM-D3202 - Standard Practice for Preparation of Bituminous Mixture Beam Specimens by Means of the California Kneading Compactor (Withdrawn 2007)
- ASTM-D3203 - Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures
- ASTM-D3204 - Standard Specification for Preformed Cellular Plastic Joint Fillers for Relieving Pressure (Withdrawn 2004)
- ASTM-D3205 - Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer (Withdrawn 2000)
- ASTM-D3279 - Standard Test Method for
n -Heptane Insolubles - ASTM-D3289 - Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
- ASTM-D3319 - Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel
- ASTM-D3381 - Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
- ASTM-D3387 - Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) (Withdrawn 2020)
- ASTM-D3397 - Method of Test for Triaxial Classification of Base Materials, S Oils and Soil (Withdrawn 1987)
- ASTM-D3398 - Standard Test Method for Index of Aggregate Particle Shape and Texture (Withdrawn 2014)
- ASTM-D3405 - Standard Specification for Joint Sealants, Hot-Applied, for Concrete and Asphalt Pavements (Withdrawn 2002)
- ASTM-D3406 - Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements (Withdrawn 2013)
- ASTM-D3407 - Standard Test Methods for Joint Sealants, Hot-Poured, for Concrete and Asphalt Pavements (Withdrawn 1996)
- ASTM-D345 - Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications (Withdrawn 2019)
- ASTM-D3496 - Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing (Withdrawn 2010)
- ASTM-D3497 - Standard Test Method for Dynamic Modulus of Asphalt Mixtures (Withdrawn 2009)
- ASTM-D3515 - Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009)
- ASTM-D3542 - Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
- ASTM-D3549 - Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
- ASTM-D3569 - Standard Specification for Joint Sealant, Hot-Applied, Elastomeric, Jet-Fuel-Resistant-Type for Portland Cement Concrete Pavements (Withdrawn 2006)
- ASTM-D3570 - Test Method for Viscosity of Bituminous Materials with a Sliding Plate Microviscometer (Withdrawn 1986)
- ASTM-D3581 - Standard Specification for Joint Sealant, Hot-Applied, Jet-Fuel-Resistant Type, for Portland Cement Concrete and Tar-Concrete Pavements (Withdrawn 2006)
- ASTM-D3583 - Methods of Testing Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements, or Joint Sealant, Hot-Applied, Elastomeric, Jet-Fuel Resistant Type, for Portland Cement, Concrete Pavement (Withdrawn 1995)
- ASTM-D3625 - Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
- ASTM-D3628 - Standard Practice for Selection and Use of Emulsified Asphalts
- ASTM-D3633 - Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
- ASTM-D3665 - Standard Practice for Random Sampling of Construction Materials
- ASTM-D3666 - Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- ASTM-D3743 - Standard Terminology Relating To Bridge Deck and Substructure Protection (Withdrawn 2004)
- ASTM-D3744 - Standard Test Method for Aggregate Durability Index
- ASTM-D3910 - Standard Practices for Design, Testing, and Construction of Slurry Seal
- ASTM-D3963 - Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
- ASTM-D4013 - Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor (Withdrawn 2013)
- ASTM-D4014 - Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
- ASTM-D402 - Standard Test Method for Distillation of Cutback Asphalt (Withdrawn 2023)
- ASTM-D4070 - Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
- ASTM-D4071 - Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
- ASTM-D4123 - Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures (Withdrawn 2003)
- ASTM-D4124 - Standard Test Method for Separation of Asphalt into Four Fractions
- ASTM-D4125 - Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
- ASTM-D4215 - Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures
- ASTM-D4280 - Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
- ASTM-D4311 - Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
- ASTM-D4379 - Test Method for Emulsified Asphalt/Job Aggregate Cold Mix Test (Withdrawn 1986)
- ASTM-D4383 - Standard Specification for Plowable, Raised Retroreflective Pavement Markers
- ASTM-D4460 - Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods
- ASTM-D4469 - Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures
- ASTM-D448 - Standard Classification for Sizes of Aggregate for Road and Bridge Construction
- ASTM-D4505 - Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
- ASTM-D4552 - Standard Practice for Classifying Hot-Mix Recycling Agents
- ASTM-D4561 - Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials (Withdrawn 2018)
- ASTM-D4580 - Standard Practice for Measuring Delamination in Concrete Bridge Decks by Sounding
- ASTM-D4592 - Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
- ASTM-D4602 - Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
- ASTM-D4694 - Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
- ASTM-D4695 - Standard Guide for General Pavement Deflection Measurements
- ASTM-D4748 - Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
- ASTM-D4788 - Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
- ASTM-D4791 - Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM-D4792 - Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
- ASTM-D4867 - Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
- ASTM-D4887 - Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials
- ASTM-D490 - Standard Specification for Road Tar (Withdrawn 2023)
- ASTM-D4956 - Standard Specification for Retroreflective Sheeting for Traffic Control
- ASTM-D4957 - Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer
- ASTM-D5 - Standard Test Method for Penetration of Bituminous Materials
- ASTM-D5078 - Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
- ASTM-D5106 - Standard Specification for Steel Slag Aggregates for Asphalt Paving Mixtures
- ASTM-D5148 - Standard Test Method for Centrifuge Kerosine Equivalent (Withdrawn 2018)
- ASTM-D5167 - Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
- ASTM-D517 - Standard Specification for Asphalt Plank
- ASTM-D5212 - Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures (Withdrawn 2004)
- ASTM-D5249 - Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
- ASTM-D5329 - Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements
- ASTM-D5339 - Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures (Withdrawn 2005)
- ASTM-D5340 - Standard Test Method for Airport Pavement Condition Index Surveys
- ASTM-D5360 - Standard Practice for Design and Construction of Bituminous Surface Treatments
- ASTM-D5361 - Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
- ASTM-D5404 - Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
- ASTM-D5444 - Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
- ASTM-D545 - Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
- ASTM-D546 - Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures
- ASTM-D5484 - Standard Specification for Steel Grid Bridge Flooring (Withdrawn 2004)
- ASTM-D5505 - Standard Practice for Classifying Emulsified Recycling Agents
- ASTM-D5506 - Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials (Withdrawn 2015)
- ASTM-D5535 - Standard Terminology Relating to Formed-in-Place Sealants for Joints and Cracks in Pavements (Withdrawn 2009)
- ASTM-D5546 - Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge (Withdrawn 2017)
- ASTM-D5581 - Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
- ASTM-D5624 - Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications (Withdrawn 2022)
- ASTM-D5710 - Standard Specification for Trinidad Lake Modified Asphalt
- ASTM-D5711 - Standard Test Method for Determining the Adherent Coating on Coarse Aggregates (Withdrawn 2012)
- ASTM-D5801 - Standard Test Method for Toughness and Tenacity of Asphalt Materials
- ASTM-D5821 - Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM-D5840 - Standard Specification for Type II Polymer Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005)
- ASTM-D5841 - Standard Specification for Type III Polymer Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005)
- ASTM-D5858 - Standard Guide for Calculating
In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory - ASTM-D5892 - Standard Specification for Type IV Polymer-Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005)
- ASTM-D5893 - Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
- ASTM-D5973 - Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
- ASTM-D5976 - Standard Specification for Type I Polymer Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005)
- ASTM-D5977 - Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
- ASTM-D6084 - Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer
- ASTM-D6087 - Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
- ASTM-D6114 - Standard Specification for Asphalt-Rubber Binder (Withdrawn 2018)
- ASTM-D6153 - Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems
- ASTM-D6154 - Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
- ASTM-D6155 - Standard Specification for Nontraditional Coarse Aggregates for Asphalt Paving Mixtures
- ASTM-D6275 - Standard Practice for Laboratory Testing of Bridge Decks (Withdrawn 2004)
- ASTM-D6297 - Standard Specification for Asphaltic Plug Joints for Bridges
- ASTM-D6307 - Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
- ASTM-D632 - Standard Specification for Sodium Chloride
- ASTM-D633 - Standard Volume Correction Table for Road Tar (Withdrawn 2023)
- ASTM-D6359 - Standard Specification for Minimum Retroreflectance of Newly Applied Pavement Marking Using Portable Hand-Operated Instruments (Withdrawn 2006)
- ASTM-D6372 - Standard Practice for Design, Testing, and Construction of Microsurfacing
- ASTM-D6373 - Standard Specification for Performance-Graded Asphalt Binder
- ASTM-D6390 - Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
- ASTM-D6433 - Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
- ASTM-D6521 - Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
- ASTM-D6607 - Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
- ASTM-D6608 - Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
- ASTM-D6626 - Standard Specification for Performance-Graded Trinidad Lake Modified Asphalt Binder
- ASTM-D6627 - Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
- ASTM-D6628 - Standard Specification for Color of Retroreflective Pavement Marking Materials
- ASTM-D6648 - Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- ASTM-D6690 - Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
- ASTM-D6703 - Standard Test Method for Automated Heithaus Titrimetry
- ASTM-D6704 - Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
- ASTM-D6723 - Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (Withdrawn 2011)
- ASTM-D6752 - Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
- ASTM-D6816 - Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders (Withdrawn 2021)
- ASTM-D6847 - Standard Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures (Withdrawn 2010)
- ASTM-D6857 - Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
- ASTM-D692 - Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
- ASTM-D6924 - Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
- ASTM-D6925 - Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
- ASTM-D6926 - Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
- ASTM-D6927 - Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
- ASTM-D6928 - Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
- ASTM-D6929 - Standard Practice for Evaluating the Effect of Freezing on Emulsified Asphalts
- ASTM-D693 - Standard Specification for Crushed Aggregate for Macadam Pavements (Withdrawn 2008)
- ASTM-D6930 - Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts
- ASTM-D6931 - Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures
- ASTM-D6932 - Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
- ASTM-D6933 - Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
- ASTM-D6934 - Standard Test Method for Residue by Evaporation of Emulsified Asphalt
- ASTM-D6935 - Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
- ASTM-D6936 - Standard Test Method for Determining Demulsibility of Emulsified Asphalt
- ASTM-D6937 - Standard Test Method for Determining Density of Emulsified Asphalt
- ASTM-D6951 - Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
- ASTM-D6995 - Standard Test Method for Determining Field VMA Based on the Maximum Specific Gravity of an Asphalt Mixture (G
mm ) - ASTM-D6997 - Standard Test Method for Distillation of Emulsified Asphalt
- ASTM-D6998 - Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
- ASTM-D6999 - Standard Practice for Miscibility of Emulsified Asphalts
- ASTM-D70 - Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
- ASTM-D7000 - Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
- ASTM-D7063 - Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples
- ASTM-D7064 - Standard Practice for Open-Graded Friction Course (OGFC) Mix Design
- ASTM-D7113 - Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
- ASTM-D7115 - Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
- ASTM-D7116 - Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
- ASTM-D7172 - Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared (Withdrawn 2022)
- ASTM-D7173 - Standard Practice for Determining the Separation Tendency of Polymer from Polymer-Modified Asphalt
- ASTM-D7174 - Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM-D7175 - Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM-D7196 - Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
- ASTM-D7226 - Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM-D7227 - Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus
- ASTM-D7228 - Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
- ASTM-D7229 - Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor (Withdrawn 2021)
- ASTM-D7312 - Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST) (Withdrawn 2019)
- ASTM-D7313 - Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
- ASTM-D7369 - Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
- ASTM-D7370 - Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
- ASTM-D7402 - Standard Practice for Identifying Cationic Emulsified Asphalts
- ASTM-D7403 - Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
- ASTM-D7404 - Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Balance Analyzer
- ASTM-D7405 - Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM-D7428 - Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
- ASTM-D7460 - Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending (Withdrawn 2019)
- ASTM-D7495 - Standard Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials
- ASTM-D7496 - Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
- ASTM-D7497 - Standard Practice for Recovering Residue from Emulsified Asphalt Using Low-Temperature Evaporative Technique
- ASTM-D75 - Standard Practice for Sampling Aggregates
- ASTM-D7552 - Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer
- ASTM-D7553 - Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
- ASTM-D7564 - Standard Practice for Construction of Asphalt-Rubber Cape Seal
- ASTM-D7585 - Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
- ASTM-D7643 - Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
- ASTM-D7741 - Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer
- ASTM-D7870 - Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
- ASTM-D7906 - Standard Practice for Recovery of Asphalt Binder from Solution Using Toluene and the Rotary Evaporator
- ASTM-D7942 - Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas
- ASTM-D7944 - Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven
- ASTM-D7981 - Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor
- ASTM-D8 - Standard Terminology Relating to Materials for Roads and Pavements
- ASTM-D8021 - Standard Guide for Blast Furnace and Steel Furnace Slag as Produced During the Manufacture of Iron and Steel
- ASTM-D8044 - Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
- ASTM-D8055 - Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards
- ASTM-D8078 - Standard Test Method for Ash Content of Asphalt Binder and Emulsified Asphalt Residues
- ASTM-D8079 - Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor
- ASTM-D8125 - Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)
- ASTM-D8138 - Standard Specification for Preformed Silicone Joint Sealing System for Bridges
- ASTM-D8139 - Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM-D8140 - Standard Guide for the Use of Foundry Sand in Asphalt Mixtures
- ASTM-D8159 - Standard Test Method for Automated Extraction of Asphalt Binder from Asphalt Mixtures
- ASTM-D8188 - Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
- ASTM-D8225 - Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
- ASTM-D8237 - Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device
- ASTM-D8239 - Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
- ASTM-D8254 - Standard Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester
- ASTM-D8260 - Standard Specification for Hot-Applied Asphalt Aggregate-Filled Mastic
- ASTM-D8292 - Standard Test Method for Permanent Deformation Behavior and Rutting Resistance of Compacted Asphalt Mix in the Modified Loaded Wheel Tracker Test Utilizing Controlled Confining Pressure
- ASTM-D8395 - Standard Specification for Aramid Fiber for Asphalt Mixtures
- ASTM-D8418 - Standard Guide for Material and Construction Standards Related to Sustainability Within Committee D04
- ASTM-D8458 - Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
- ASTM-D8467 - Standard Test Method for Determination of Emulsified Asphalt Residue By Quick Boil
- ASTM-D8507 - Standard Specification for High Load Multi-Rotational Disc Bearings for Bridges and Structures
- ASTM-D8531 - Standard Specification for Latex-Based Pavement Sealers Containing Mineral Aggregates
- ASTM-D8541 - Standard Test Method for Determination of Relative Rotation to Evaluate the Workability of Asphalt Mixture Using Wireless Particle-Size Sensors
- ASTM-D946 - Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction
- ASTM-D977 - Standard Specification for Emulsified Asphalt
- ASTM-D979 - Standard Practice for Sampling Bituminous Paving Mixtures
- ASTM-D98 - Standard Specification for Calcium Chloride
- ASTM-D994 - Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
- ASTM-D995 - Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009)
- ASTM-E1082 - Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
- ASTM-E1136 - Standard Specification for P195/75R14 Radial Standard Reference Test Tire
- ASTM-E1166 - Standard Guide for Network Level Pavement Management
- ASTM-E1170 - Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
- ASTM-E1215 - Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
- ASTM-E1274 - Standard Test Method for Measuring Pavement Roughness Using a Profilograph
- ASTM-E1318 - Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods
- ASTM-E1337 - Standard Test Method for Determining Longitudinal Peak Braking Coefficient (PBC) of Paved Surfaces Using Standard Reference Test Tire
- ASTM-E1364 - Standard Test Method for Measuring Road Roughness by Static Level Method
- ASTM-E1393 - Test Method for Determining the Polishability of Bituminous Pavement Surfaces and Specimens by Means of the Penn State Reciprocating Polishing Machine (Withdrawn 1997)
- ASTM-E1442 - Practice for Highway-Traffic Monitoring (Withdrawn 2001)
- ASTM-E1448 - Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
- ASTM-E1489 - Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
- ASTM-E1500 - Practice for Computing Mean Square Numerics from Road Surface Elevation Profile Records (Withdrawn 1998)
- ASTM-E1551 - Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire
- ASTM-E1572 - Standard Practice for Classifying Highway Vehicles from Known Axle Count and Spacing (Withdrawn 2002)
- ASTM-E1656 - Standard Guide for Classification of Automated Pavement Condition Survey Equipment (Withdrawn 2022)
- ASTM-E1703 - Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
- ASTM-E1777 - Standard Guide for Prioritization of Data Needs for Pavement Management
- ASTM-E1778 - Standard Terminology Relating to Pavement Distress
- ASTM-E1844 - Standard Specification for A Size 10 × 4–5 Smooth-Tread Friction Test Tire
- ASTM-E1845 - Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth
- ASTM-E1859 - Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
- ASTM-E1889 - Standard Guide for Pavement Management Implementation
- ASTM-E1890 - Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment
- ASTM-E1911 - Standard Test Method for Measuring Surface Frictional Properties Using the Dynamic Friction Tester
- ASTM-E1926 - Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
- ASTM-E1927 - Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
- ASTM-E1957 - Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers
- ASTM-E1960 - Standard Practice for Calculating International Friction Index of a Pavement Surface
- ASTM-E2034 - Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces
- ASTM-E2100 - Standard Practice for Calculating the International Runway Friction Index (Withdrawn 2019)
- ASTM-E2101 - Standard Test Method for Measuring the Frictional Properties of Winter-Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
- ASTM-E2133 - Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
- ASTM-E2157 - Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
- ASTM-E2158 - Standard Specification for Dedicated Short Range Communication (DSRC) Physical Layer Using Microwave in the 902 to 928 MHz Band (Withdrawn 2010)
- ASTM-E2213 - Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5-GHz Band Dedicated Short-Range Communications (DSRC), Medium Access Control (MAC), and Physical Layer (PHY) Specifications
- ASTM-E2259 - Standard Guide for Archiving and Retrieving Intelligent Transportation Systems-Generated Data
- ASTM-E2300 - Standard Specification for Highway Traffic Monitoring Devices
- ASTM-E2340 - Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
- ASTM-E2341 - Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
- ASTM-E2380 - Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
- ASTM-E2415 - Standard Practice for Installing Piezoelectric Highway Traffic Sensors
- ASTM-E2467 - Standard Practice for Developing Axle Count Adjustment Factors
- ASTM-E2468 - Standard Practice for Metadata to Support Archived Data Management Systems
- ASTM-E2532 - Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
- ASTM-E2560 - Standard Specification for Data Format for Pavement Profile
- ASTM-E2561 - Standard Practice for the Installation of Inductive Loop Detectors
- ASTM-E2583 - Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
- ASTM-E2665 - Standard Specification for Archiving ITS-Generated Traffic Monitoring Data
- ASTM-E2666 - Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports
- ASTM-E2667 - Standard Practice for Acquiring Intersection Turning Movement Traffic Data
- ASTM-E274 - Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
- ASTM-E2759 - Standard Practice for Highway Traffic Monitoring Truth-in-Data
- ASTM-E2793 - Standard Guide for Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment
- ASTM-E2835 - Standard Test Method for Measuring Deflections Using a Portable Impulse Plate Load Test Device
- ASTM-E2840 - Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots
- ASTM-E2883 - Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)
- ASTM-E2955 - Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces
- ASTM-E3013 - Standard Test Method for Evaluating Concrete Pavement Dowel Bar Alignment Using Magnetic Pulse Induction
- ASTM-E3028 - Standard Practice for Computing Wheelchair Pathway Roughness Index as Related to Comfort, Passability, and Whole-Body Vibrations from Longitudinal Profile Measurements
- ASTM-E303 - Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
- ASTM-E3145 - Standard Test Method for User-Level Calibration of Dynamic Friction Tester (DF Tester)
- ASTM-E3188 - Standard Terminology for Aircraft Braking Performance
- ASTM-E3208 - Standard Specification for Minimum Equipment Requirements for Mobile Surface Contaminant Classification and Measurement Equipment
- ASTM-E3209 - Standard Test Method for Pavement Thickness by Magnetic Pulse Induction
- ASTM-E3266 - Standard Guide for Friction-Limited Aircraft Braking Measurements and Reporting
- ASTM-E3303 - Standard Practice for Generating Pavement Surface Cracking Indices from Digital Images
- ASTM-E3304 - Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Walking Speed Continuous Friction-Measuring Equipment (CFME) Fixed-Slip Technique
- ASTM-E3331 - Standard Test Method for Measuring Target Modulus Using the Light Weight Deflectometer on Laboratory Compaction Characteristic Samples
- ASTM-E445 - Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
- ASTM-E451 - Recommended Practice for Testing Pavement Polishing in the Laboratory (Full-Scale Wheel Method) (Withdrawn 1988)
- ASTM-E501 - Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
- ASTM-E503 - Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique (Withdrawn 2010)
- ASTM-E510 - Recommended Practice for Determining Pavement Surface Frictional and Polishing Characteristics Using a Small Torque Device (Withdrawn 1985)
- ASTM-E524 - Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
- ASTM-E556 - Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
- ASTM-E660 - Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
- ASTM-E670 - Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
- ASTM-E707 - Standard Test Method for Skid Resistance Measurements Using the North Carolina State University Variable-Speed Friction Tester (Withdrawn 2006)
- ASTM-E867 - Standard Terminology Relating to Vehicle-Pavement Systems
- ASTM-E950 - Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer-Established Inertial Profiling Reference
- ASTM-E965 - Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique