02.05: Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-B1000 - Standard Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry
- ASTM-B1023 - Standard Test Method for Abrasion Resistance of Hard Anodic Coatings by a Taber-Type Abraser
- ASTM-B1026 - Standard Test Method for Measurement of Thickness of Chromium and Chromium Alloy Deposits by the Coulometric/White Light Interferometry
- ASTM-B136 - Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
- ASTM-B137 - Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
- ASTM-B177 - Standard Guide for Engineering Chromium Electroplating
- ASTM-B183 - Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- ASTM-B200 - Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
- ASTM-B201 - Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
- ASTM-B212 - Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM-B213 - Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM-B214 - Standard Test Method for Sieve Analysis of Metal Powders
- ASTM-B215 - Standard Practices for Sampling Metal Powders
- ASTM-B222 - Specification for Sintered Iron-Copper Structural Parts (Withdrawn 1988)
- ASTM-B242 - Standard Guide for Preparation of High-Carbon Steel for Electroplating
- ASTM-B243 - Standard Terminology of Powder Metallurgy
- ASTM-B244 - Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM-B252 - Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
- ASTM-B253 - Standard Guide for Preparation of Aluminum Alloys for Electroplating
- ASTM-B254 - Standard Practice for Preparation of and Electroplating on Stainless Steel
- ASTM-B255 - Standard Specification for Sintered Bronze Structural Parts (Withdrawn 2000)
- ASTM-B276 - Standard Test Method for Apparent Porosity in Cemented Carbides
- ASTM-B281 - Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
- ASTM-B282 - Standard Specification for Sintered Brass Structural Parts (Withdrawn 2000)
- ASTM-B293 - Method of Subsieve Analysis of Granular Metal Powders by Air Classification (Withdrawn 1984)
- ASTM-B294 - Standard Test Method for Hardness Testing of Cemented Carbides
- ASTM-B303 - Specification for Copper-Infiltrated Sintered Carbon Steel Structural Parts (Withdrawn 1989)
- ASTM-B310 - Specification for Sintered Carbon Steel Structural Parts (Withdrawn 1989)
- ASTM-B311 - Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
- ASTM-B312 - Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
- ASTM-B319 - Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
- ASTM-B320 - Standard Practice for Preparation of Iron Castings for Electroplating
- ASTM-B322 - Standard Guide for Cleaning Metals Prior to Electroplating
- ASTM-B328 - Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings (Withdrawn 2009)
- ASTM-B329 - Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
- ASTM-B330 - Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
- ASTM-B331 - Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- ASTM-B343 - Standard Practice for Preparation of Nickel for Electroplating with Nickel
- ASTM-B347 - Test Method for Hardness of Sintered Metal Friction Materials (Withdrawn 1991)
- ASTM-B368 - Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
- ASTM-B374 - Standard Terminology Relating to Electroplating
- ASTM-B376 - Test Method for Density of Sintered Metal Friction Materials
- ASTM-B378 - Test Method for Transverse Rupture Strength of Sintered Metal Friction Materials (Withdrawn 1990)
- ASTM-B380 - Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
- ASTM-B390 - Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides (Withdrawn 2010)
- ASTM-B406 - Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM-B417 - Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM-B421 - Test Method for Electrical Resistivity of Cemented Tungsten Carbides
- ASTM-B426 - Specification for Sintered Copper-Steel Structural Parts (Withdrawn 1989)
- ASTM-B430 - Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry (Withdrawn 2011)
- ASTM-B431 - Practice for Processing of Mandrels for Electroforming (Withdrawn 1993)
- ASTM-B438 - Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
- ASTM-B438M - Specification for Sintered Bronze Bearings (Oil Impregnated) (Metric) (Withdrawn 1998)
- ASTM-B439 - Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
- ASTM-B449 - Standard Specification for Chromates on Aluminum
- ASTM-B450 - Practice for Engineering Design of Electroformed Articles (Withdrawn 1993)
- ASTM-B456 - Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus
Chromium and Nickel Plus Chromium - ASTM-B457 - Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum (Withdrawn 2023)
- ASTM-B458 - Standard Specification for Sintered Nickel Silver Structural Parts (Withdrawn 2000)
- ASTM-B461 - Test Method for Frictional Characteristics of Sintered Metal Friction Materials Run in Lubricants (Withdrawn 1990)
- ASTM-B480 - Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
- ASTM-B481 - Standard Practice for Preparation of Titanium and Titanium Alloys
for Electroplating - ASTM-B482 - Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
- ASTM-B484 - Specification for Sintered Nickel Steel Structural Parts (Withdrawn 1989)
- ASTM-B487 - Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
- ASTM-B488 - Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
- ASTM-B489 - Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
- ASTM-B490 - Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
- ASTM-B499 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM-B503 - Practice for Use of Copper and Nickel Electroplating Solutions for Electroforming
- ASTM-B504 - Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
- ASTM-B507 - Standard Practice for Design of Articles to Be Electroplated on Racks
- ASTM-B510 - Specification for Supplementary Requirements for Nickel Alloy Rod and Bar for Nuclear Applications
- ASTM-B525 - Specification for Sintered Austenitic Stainless Steel Structural Parts
- ASTM-B526 - Test Method for Coefficient of Friction and Wear of Sintered Metals Friction Materials Under Dry Clutch Conditions
- ASTM-B527 - Standard Test Method for Tap Density of Metal Powders and Compounds
- ASTM-B528 - Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
- ASTM-B530 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
- ASTM-B532 - Standard Specification for Appearance of Electroplated Plastic Surfaces
- ASTM-B533 - Standard Test Method for Peel Strength of Metal Electroplated Plastics
- ASTM-B537 - Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
- ASTM-B538 - Method of Fact (Ford Anodized Aluminum Corrosion Test) (Withdrawn 1986)
- ASTM-B545 - Standard Specification for Electrodeposited Coatings of Tin
- ASTM-B553 - Test Method for Thermal Cycling of Electroplated Plastics (Withdrawn 1991)
- ASTM-B554 - Recommended Practice for Measurement of Thickness of Metallic Coatings on Nonmetallic Substrates (Withdrawn 1986)
- ASTM-B555 - Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
- ASTM-B556 - Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
- ASTM-B558 - Standard Practice for Preparation of Nickel Alloys for Electroplating
- ASTM-B567 - Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
- ASTM-B568 - Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
- ASTM-B571 - Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM-B578 - Standard Test Method for Microhardness of Electroplated Coatings
- ASTM-B579 - Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
- ASTM-B580 - Standard Specification for Anodic Oxide Coatings on Aluminum
- ASTM-B588 - Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique (Withdrawn 2016)
- ASTM-B595 - Standard Specification for Sintered Aluminum Structural Parts
- ASTM-B602 - Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
- ASTM-B604 - Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
- ASTM-B605 - Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
- ASTM-B607 - Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
- ASTM-B610 - Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
- ASTM-B612 - Iron Bronze Sintered Bearings (Oil-Impregnated)
- ASTM-B627 - Test Method for Electrolytic Corrosion Testing (EC Test) (Withdrawn 1998)
- ASTM-B629 - Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
- ASTM-B630 - Standard Practice for Preparation of Chromium for Electroplating with Chromium
- ASTM-B633 - Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- ASTM-B634 - Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
- ASTM-B635 - Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
- ASTM-B636 - Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
- ASTM-B650 - Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- ASTM-B651 - Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
- ASTM-B656 - Standard Guide for Autocatalytic (Electroless) Nickel-Phosphorus Deposition on Metals for Engineering Use (Withdrawn 2000)
- ASTM-B657 - Standard Guide for Metallographic Identification of Microstructure in Cemented Carbides
- ASTM-B659 - Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
- ASTM-B665 - Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
- ASTM-B678 - Standard Test Method for Solderability of Metallic-Coated Products
- ASTM-B679 - Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
- ASTM-B680 - Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
- ASTM-B681 - Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Transparent Coatings on Opaque Surfaces Using the Light-Section Microscope (Withdrawn 2001)
- ASTM-B689 - Standard Specification for Electroplated Engineering Nickel Coatings
- ASTM-B695 - Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
- ASTM-B696 - Standard Specification for Coatings of Cadmium Mechanically Deposited
- ASTM-B697 - Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
- ASTM-B699 - Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
- ASTM-B700 - Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- ASTM-B703 - Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
- ASTM-B715 - Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications (Withdrawn 2010)
- ASTM-B721 - Standard Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts (Withdrawn 2004)
- ASTM-B727 - Standard Practice for Preparation of Plastics Materials for Electroplating
- ASTM-B733 - Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
- ASTM-B734 - Standard Specification for Electrodeposited Copper for Engineering Uses
- ASTM-B748 - Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM-B761 - Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
- ASTM-B762 - Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
- ASTM-B764 - Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
- ASTM-B765 - Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
- ASTM-B766 - Standard Specification for Electrodeposited Coatings of Cadmium
- ASTM-B767 - Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
- ASTM-B771 - Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
- ASTM-B782 - Standard Specification for Iron Graphite Sintered Bearings (Oil-Impregnated) (Withdrawn 2007)
- ASTM-B783 - Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
- ASTM-B795 - Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
- ASTM-B796 - Standard Test Method for Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging (PF) Applications
- ASTM-B797 - Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
- ASTM-B809 - Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
- ASTM-B816 - Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
- ASTM-B817 - Standard Specification for Powder Metallurgy (PM) Titanium Alloy Structural Components (Withdrawn 2013)
- ASTM-B821 - Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
- ASTM-B822 - Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
- ASTM-B823 - Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
- ASTM-B832 - Standard Guide for Electroforming with Nickel and Copper
- ASTM-B839 - Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method (Withdrawn 2021)
- ASTM-B840 - Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits
- ASTM-B841 - Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits
- ASTM-B842 - Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits
- ASTM-B848 - Standard Specification for Powder Forged (PF) Ferrous Materials
- ASTM-B849 - Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
- ASTM-B850 - Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
- ASTM-B851 - Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
- ASTM-B853 - Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
- ASTM-B855 - Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
- ASTM-B859 - Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
- ASTM-B866 - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
- ASTM-B867 - Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
- ASTM-B873 - Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
- ASTM-B874 - Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
- ASTM-B875 - Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
- ASTM-B877 - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
- ASTM-B879 - Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
- ASTM-B883 - Standard Specification for Metal Injection Molded (MIM) Materials
- ASTM-B886 - Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
- ASTM-B887 - Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
- ASTM-B890 - Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM-B893 - Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
- ASTM-B895 - Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
- ASTM-B904 - Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
- ASTM-B905 - Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
- ASTM-B912 - Standard Specification for Passivation of Stainless Steels Using Electropolishing
- ASTM-B915 - Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
- ASTM-B916 - Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
- ASTM-B921 - Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
- ASTM-B922 - Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
- ASTM-B923 - Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
- ASTM-B925 - Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
- ASTM-B930 - Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- ASTM-B931 - Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
- ASTM-B933 - Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
- ASTM-B934 - Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
- ASTM-B935 - Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
- ASTM-B939 - Standard Test Method for Radial Crushing Strength,
K , of Powder Metallurgy (PM) Bearings and Structural Materials - ASTM-B940 - Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
- ASTM-B946 - Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products
- ASTM-B962 - Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
- ASTM-B963 - Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
- ASTM-B964 - Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM-B966 - Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas (Withdrawn 2015)
- ASTM-B970 - Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts (Withdrawn 2016)
- ASTM-B975 - Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
- ASTM-B984 - Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use
- ASTM-B988 - Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
- ASTM-B994 - Standard Specification for Nickel-Cobalt Alloy Coating
- ASTM-B995 - Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test)
- ASTM-B999 - Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate
- ASTM-C282 - Standard Test Method for Acid Resistance of Porcelain Enamels
(Citric Acid Spot Test) - ASTM-C283 - Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid
- ASTM-C285 - Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
- ASTM-C286 - Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
- ASTM-C346 - Standard Test Method for 45-deg Specular Gloss of Ceramic Materials (Withdrawn 2023)
- ASTM-C374 - Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
- ASTM-C375 - Standard Classification of Water Used in Milling of Porcelain Enamel
- ASTM-C385 - Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
- ASTM-C409 - Test Method for Torsion Resistance of Laboratory Specimens of Porcelain Enameled Iron and Steel (Withdrawn 1988)
- ASTM-C448 - Standard Test Methods for Abrasion Resistance of Porcelain Enamels
- ASTM-C536 - Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
- ASTM-C537 - Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
- ASTM-C538 - Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels (Withdrawn 2023)
- ASTM-C539 - Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
- ASTM-C614 - Standard Test Method for Alkali Resistance of Porcelain Enamels
- ASTM-C632 - Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
- ASTM-C633 - Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
- ASTM-C660 - Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
- ASTM-C664 - Standard Test Methods for Thickness of Diffusion Coating
- ASTM-C694 - Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution (Withdrawn 2021)
- ASTM-C703 - Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
- ASTM-C715 - Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis (Withdrawn 2021)
- ASTM-C743 - Standard Test Method for Continuity of Porcelain Enamel Coatings
- ASTM-C756 - Standard Test Method for Cleanability of Surface Finishes
- ASTM-C774 - Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
- ASTM-C810 - Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry (Withdrawn 2021)
- ASTM-C839 - Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
- ASTM-C872 - Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
- ASTM-D1281 - Test Method for Rinsing Properties of Metal Cleaners (Withdrawn 1988)
- ASTM-D1730 - Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
- ASTM-D1731 - Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
- ASTM-D1732 - Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
- ASTM-E1338 - Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases
- ASTM-E159 - Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
- ASTM-E194 - Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders