Document Center List of Standards on Earthworks. Excavations. Foundation Construction. Underground Works Including Geotechnics Earth-Moving Machinery, See 53.100
ICS Code 93.020
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C1242 - Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
- ASTM-D1143 - Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
- ASTM-D1194 - Standard Test Method for Bearing Capacity of Soil for Static Load and Spread Footings (Withdrawn 2003)
- ASTM-D1241 - Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses (Withdrawn 2024)
- ASTM-D1452 - Standard Practice for Soil Exploration and Sampling by Auger Borings
- ASTM-D1556 - Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method (Withdrawn 2024)
- ASTM-D1557 - Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
- ASTM-D1558 - Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils (Withdrawn 2019)
- ASTM-D1586 - Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
- ASTM-D1587 - Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes (Withdrawn 2024)
- ASTM-D1632 - Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
- ASTM-D1633 - Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
- ASTM-D1634 - Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
- ASTM-D1635 - Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
- ASTM-D1883 - Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
- ASTM-D2113 - Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration (Withdrawn 2023)
- ASTM-D2166 - Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
- ASTM-D2167 - Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method (Withdrawn 2024)
- ASTM-D2216 - Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
- ASTM-D2325 - Standard Test Method for Capillary-Moisture Relationships for Coarse- and Medium-Textured Soils by Porous-Plate Apparatus (Withdrawn 2007)
- ASTM-D2419 - Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
- ASTM-D2434 - Standard Test Methods for Measurement of Hydraulic Conductivity of Coarse-Grained Soils
- ASTM-D2435 - Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
- ASTM-D2487 - Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
- ASTM-D2488 - Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
- ASTM-D2573 - Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
- ASTM-D2844 - Standard Test Method for Resistance
R -Value and Expansion Pressure of Compacted Soils - ASTM-D2845 - Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock (Withdrawn 2017)
- ASTM-D2850 - Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
- ASTM-D2922 - Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
- ASTM-D2937 - Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
- ASTM-D3017 - Standard Test Method for Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth) (Witthdrawn 2007)
- ASTM-D3080 - Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020)
- ASTM-D3148 - Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression (Withdrawn 2005)
- ASTM-D3152 - Standard Test Method for Capillary-Moisture Relationships for Fine-Textured Soils by Pressure-Membrane Apparatus (Withdrawn 2007)
- ASTM-D3385 - Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
- ASTM-D3441 - Standard Test Method for Mechanical Cone Penetration Testing of Soils
- ASTM-D3550 - Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
- ASTM-D3551 - Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
- ASTM-D3689 - Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
- ASTM-D3966 - Standard Test Methods for Deep Foundations Under Lateral Load
- ASTM-D3967 - Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens with Flat Loading Platens
- ASTM-D4015 - Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices
- ASTM-D4186 - Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
- ASTM-D420 - Standard Guide for Site Characterization for Engineering Design and Construction Purposes
- ASTM-D421 - Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants (Withdrawn 2016)
- ASTM-D4219 - Standard Test Method for Short-Term Unconfined Compressive Strength Index of Chemically Grouted Soils
- ASTM-D4220 - Standard Practices for Preserving and Transporting Soil Samples (Withdrawn 2023)
- ASTM-D4223 - Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
- ASTM-D425 - Standard Test Method for Centrifuge Moisture Equivalent of Soils (Withdrawn 2024)
- ASTM-D4253 - Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
- ASTM-D4254 - Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
- ASTM-D427 - Test Method for Shrinkage Factors of Soils by the Mercury Method (Withdrawn 2008)
- ASTM-D4318 - Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
- ASTM-D4319 - Standard Test Method for Distribution Ratios by the Short-Term Batch Method (Withdrawn 2007)
- ASTM-D4320 - Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters (Withdrawn 2018)
- ASTM-D4341 - Standard Test Method for Creep of Cylindrical Hard Rock Core Specimens in Uniaxial Compression (Withdrawn 2005)
- ASTM-D4380 - Standard Test Method for Determining Density of Construction Slurries
- ASTM-D4381 - Standard Test Method for Sand Content by Volume of Bentonitic Slurries (Withdrawn 2021)
- ASTM-D4394 - Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
- ASTM-D4395 - Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
- ASTM-D4403 - Standard Practice for Extensometers Used in Rock
- ASTM-D4404 - Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
- ASTM-D4405 - Standard Test Method for Creep of Cylindrical Soft Rock Core Specimens in Uniaxial Compressions (Withdrawn 2005)
- ASTM-D4406 - Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression (Withdrawn 2005)
- ASTM-D4428 - Standard Test Methods for Crosshole Seismic Testing (Withdrawn 2023)
- ASTM-D4429 - Standard Test Method for CBR (California Bearing Ratio) of Soils in Place (Withdrawn 2018)
- ASTM-D4435 - Standard Test Method for Rock Bolt Anchor Pull Test (Withdrawn 2022)
- ASTM-D4436 - Standard Test Method for Rock Bolt Long-Term Load Retention Test (Withdrawn 2022)
- ASTM-D4452 - Standard Practice for X-Ray Radiography of Soil Samples
- ASTM-D4506 - Standard Test Method for Determining In Situ Modulus of Deformation of a Rock Mass Using the Radial Jacking Test
- ASTM-D4525 - Standard Test Method for Permeability of Rocks by Flowing Air (Withdrawn 2022)
- ASTM-D4535 - Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
- ASTM-D4543 - Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
- ASTM-D4546 - Standard Test Methods for One-Dimensional Swell or Collapse of Soils
- ASTM-D4553 - Standard Test Method for Determining In Situ Creep Characteristics of Rock
- ASTM-D4554 - Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities (Withdrawn 2021)
- ASTM-D4555 - Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test (Withdrawn 2019)
- ASTM-D4564 - Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method (Withdrawn 2013)
- ASTM-D4609 - Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization (Withdrawn 2017)
- ASTM-D4611 - Standard Test Method for Specific Heat of Rock and Soil
- ASTM-D4612 - Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil
- ASTM-D4622 - Standard Test Method for Rock Mass Monitoring Using Inclinometers (Withdrawn 2000)
- ASTM-D4623 - Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
- ASTM-D4631 - Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
- ASTM-D4633 - Standard Test Method for Energy Measurement for Dynamic Penetrometers
- ASTM-D4645 - Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method (Withdrawn 2017)
- ASTM-D4647 - Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
- ASTM-D4648 - Standard Test Methods for Laboratory Miniature Vane Shear Test for Saturated
Fine-Grained Clayey Soil - ASTM-D4718 - Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
- ASTM-D4719 - Standard Test Methods for Prebored Pressuremeter Testing in Soils
- ASTM-D4729 - Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flat Jack Method
- ASTM-D4750 - Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) (Withdrawn 2010)
- ASTM-D4767 - Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
- ASTM-D4829 - Standard Test Method for Expansion Index of Soils
- ASTM-D4914 - Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
- ASTM-D4945 - Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
- ASTM-D4971 - Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
- ASTM-D5030 - Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
- ASTM-D5079 - Standard Practices for Preserving and Transporting Rock Core Samples (Withdrawn 2017)
- ASTM-D5080 - Standard Test Method for Rapid Determination of Percent Compaction
- ASTM-D5102 - Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures (Withdrawn 2018)
- ASTM-D5195 - Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
- ASTM-D5202 - Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
- ASTM-D5239 - Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization (Withdrawn 2021)
- ASTM-D5311 - Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil (Withdrawn 2022)
- ASTM-D5312 - Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
- ASTM-D5313 - Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
- ASTM-D5314 - Standard Guide for Soil Gas Monitoring in the Vadose Zone (Withdrawn 2015)
- ASTM-D5333 - Standard Test Method for Measurement of Collapse Potential of Soils (Withdrawn 2012)
- ASTM-D5335 - Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
- ASTM-D5439 - Standard Test Method for Determination of Sediment in Moellon
- ASTM-D558 - Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
- ASTM-D559 - Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
- ASTM-D560 - Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
- ASTM-D5731 - Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
- ASTM-D5753 - Standard Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging
- ASTM-D5780 - Standard Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load
- ASTM-D5912 - Standard Practice for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
- ASTM-D6167 - Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
- ASTM-D6236 - Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil (Withdrawn 2020)
- ASTM-D6598 - Standard Guide for Installing and Operating Settlement Points for Monitoring Vertical Deformations
- ASTM-D6599 - Standard Practice for Construction of Live Fascines on Slopes (Withdrawn 2023)
- ASTM-D6639 - Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations
- ASTM-D6726 - Standard Guide for Conducting Borehole Geophysical Logging—Electromagnetic Induction (Withdrawn 2024)
- ASTM-D6727 - Standard Guide for Conducting Borehole Geophysical Logging—Neutron
- ASTM-D6758 - Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
- ASTM-D698 - Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
- ASTM-D7070 - Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
- ASTM-D7380 - Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
- ASTM-D7383 - Standard Test Methods for Axial Rapid Load (Compressive Force Pulse) Testing of Deep Foundations
- ASTM-D7401 - Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests (Withdrawn 2017)
- ASTM-D7758 - Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
- ASTM-D7762 - Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
- ASTM-D7764 - Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers
- ASTM-D806 - Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
- ASTM-D8232 - Standard Test Procedures for Measuring the Inclination of Deep Foundations
- ASTM-D854 - Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023)
- ASTM-E2392 - Standard Guide for Design of Earthen Wall Building Systems
- ASTM-E946 - Test Method for Water Absorption of Bentonite by the Porous Plate Method (Withdrawn 1997)
- ASTM-F432 - Standard Specification for Roof and Rock Bolts and Accessories
- ASTM-G57 - Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
BSI:
- BS-1377 - Methods of test for soils for civil engineering purposes
- BS-1377-1 - Methods of test for soils for civil engineering purposes
- BS-1377-2 - Methods of test for soils for civil engineering purposes
- BS-1377-3 - Methods of test for soils for civil engineering purposes
- BS-1377-3-TC - Tracked Changes. Methods of test for soils for civil engineering purposes
- BS-1377-4 - Methods of test for soils for civil engineering purposes
- BS-1377-5 - Methods of test for soils for civil engineering purposes. Compressibility, permeability and durability tests
- BS-1377-6 - Methods of test for soils for civil engineering purposes
- BS-1377-7 - Methods of test for soils for civil engineering purposes. Shear strength tests (total stress)
- BS-1377-8 - Methods of test for soils for civil engineering purposes. Shear strength tests (effective stress)
- BS-1377-9 - Methods for test for soils for civil engineering purposes. In-situ tests
- BS-1924 - Methods of test for stabilized soils
- BS-1924-1 - Hydraulically bound and stabilized materials for civil engineering purposes
- BS-1924-1-TC - Tracked Changes. Hydraulically bound and stabilized materials for civil engineering purposes
- BS-1924-2 - Hydraulically bound and stabilized materials for civil engineering purposes
- BS-1924-2-TC - Tracked Changes. Hydraulically bound and stabilized materials for civil engineering purposes
- BS-3882 - Specification for topsoil
- BS-4447 - Specification for the Performance of Prestressing Anchorages for Post-Tensioned Constr
- BS-5228-4 - Code of Practice for Noise & Vibration Control Applicable To Piling Operations
- BS-6031 - Code of practice for earthworks
- BS-6100-2.2.1 - Glossary of building and civil engineering terms. Civil engineering. Substructures. Earthworks. Foundations. Tunnels. Earthworks
- BS-6100-2.2.2 - Glossary of building and civil engineering terms. Civil engineering. Substructures. Earthworks. Foundations. Tunnels. Substructures and foundations
- BS-8002 - Code of practice for earth retaining structures
- BS-8002-TC - Tracked Changes. Code of practice for earth retaining structures
- BS-8004 - Code of practice for foundations
- BS-8006-1 - Code of practice for strengthened/reinforced soils and other fills
- BS-8006-2 - Code of practice for strengthened/reinforced soils
- BS-8008 - Safety precautions and procedures for the construction and descent of machine-bored shafts for piling and other purposes
- BS-8081 - Code of practice for grouted anchors
- BS-8103-1 - Structural design of low-rise buildings
- BS-EN-12063-TC - Tracked Changes. Execution of special geotechnical work. Sheet pile walls, combined pile walls, high modulus walls
- BS-EN-12699 - Execution of special geotechnical works. Displacement piles
- BS-EN-12699-TC - Tracked Changes. Execution of special geotechnical works. Displacement piles
- BS-EN-12715 - Execution of special geotechnical work. Grouting
- BS-EN-12716 - Execution of special geotechnical work. Jet grouting
- BS-EN-12716-TC - Tracked Changes. Execution of special geotechnical work. Jet grouting
- BS-EN-12794 - Precast concrete products. Foundation piles
- BS-EN-13251 - Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures
- BS-EN-13331-1 - Trench lining systems
- BS-EN-13331-2 - Trench lining systems
- BS-EN-14199 - Execution of special geotechnical works. Micropiles
- BS-EN-14199-TC - Tracked Changes. Execution of special geotechnical works. Micropiles
- BS-EN-14475 - Execution of special geotechnical works. Reinforced fill
- BS-EN-14490 - Execution of special geotechnical works. Soil nailing
- BS-EN-14653-1 - Manually operated hydraulic shoring systems for groundwork support
- BS-EN-14653-2 - Manually operated hydraulic shoring systems for groundwork support
- BS-EN-14679 - Execution of special geotechnical works. Deep mixing
- BS-EN-14731 - Execution of special geotechnical works. Ground treatment by deep vibration
- BS-EN-15237 - Execution of special geotechnical works. Vertical drainage
- BS-EN-1536 - Execution of special geotechnical work. Bored piles
- BS-EN-1537 - Execution of special geotechnical works. Ground anchors
- BS-EN-1538 - Execution of special geotechnical works. Diaphragm walls
- BS-EN-16228-1 - Drilling and foundation equipment. Safety
- BS-EN-16228-2 - Drilling and foundation equipment. Safety
- BS-EN-16228-3 - Drilling and foundation equipment. Safety
- BS-EN-16228-4 - Drilling and foundation equipment. Safety
- BS-EN-16228-5 - Drilling and foundation equipment. Safety
- BS-EN-16228-6 - Drilling and foundation equipment. Safety
- BS-EN-16228-7 - Drilling and foundation equipment. Safety
- BS-EN-16907-1 - Earthworks
- BS-EN-16907-2 - Earthworks
- BS-EN-16907-3 - Earthworks
- BS-EN-16907-4 - Earthworks
- BS-EN-16907-5 - Earthworks
- BS-EN-16907-7 - Earthworks
- BS-EN-17542-1 - Earthworks. Geotechnical laboratory tests
- BS-EN-17542-2 - Earthworks. Geotechnical laboratory tests
- BS-EN-17542-3 - Earthworks. Geotechnical laboratory tests
- BS-EN-17685-1 - Earthworks. Chemical tests
- BS-EN-1997-1 - Eurocode 7. Geotechnical design
- BS-EN-1997-1(NA) - UK National Annex to Eurocode 7. Geotechnical design
- BS-EN-1997-2 - Eurocode 7. Geotechnical design
- BS-EN-1997-2(NA) - UK National Annex to Eurocode 7. Geotechnical design
- BS-EN-ISO-14688-1 - Geotechnical investigation and testing. Identification and classification of soil
- BS-EN-ISO-14688-2 - Geotechnical investigation and testing. Identification and classification of soil
- BS-EN-ISO-14689 - Geotechnical investigation and testing. Identification, description and classification of rock
- BS-EN-ISO-14689-1 - Geotechnical investigation and testing. Identification and classification of rock. Identification and description
- BS-EN-ISO-14689-TC - Tracked Changes. Geotechnical investigation and testing. Identification, description and classification of rock
- BS-EN-ISO-17628 - Geotechnical investigation and testing. Geothermal testing. Determination of thermal conductivity of soil and rock using a borehole heat exchanger
- BS-EN-ISO-17892-1 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-10 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-11 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-12 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-2 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-3 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-4 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-5 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-6 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-6-TC - Tracked Changes. Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-7 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-8 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-17892-9 - Geotechnical investigation and testing. Laboratory testing of soil
- BS-EN-ISO-18674-1 - Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation
- BS-EN-ISO-18674-2 - Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation
- BS-EN-ISO-18674-3 - Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation
- BS-EN-ISO-18674-4 - Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation
- BS-EN-ISO-18674-5 - Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation
- BS-EN-ISO-18674-8 - Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation
- BS-EN-ISO-19901-4 - Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-19901-4-TC - Tracked Changes. Petroleum and natural gas industries. Specific requirements for offshore structures
- BS-EN-ISO-22282-1 - Geotechnical investigation and testing. Geohydraulic testing
- BS-EN-ISO-22282-2 - Geotechnical investigation and testing. Geohydraulic testing
- BS-EN-ISO-22282-3 - Geotechnical investigation and testing. Geohydraulic testing
- BS-EN-ISO-22282-4 - Geotechnical investigation and testing. Geohydraulic testing
- BS-EN-ISO-22282-4-TC - Tracked Changes. Geotechnical investigation and testing. Geohydraulic testing
- BS-EN-ISO-22282-5 - Geotechnical investigation and testing. Geohydraulic testing
- BS-EN-ISO-22282-6 - Geotechnical investigation and testing. Geohydraulic testing
- BS-EN-ISO-22475-1 - Geotechnical investigation and testing. Sampling methods and groundwater measurements
- BS-EN-ISO-22476-1 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-10 - Geotechnical Investigation and testing. Field testing
- BS-EN-ISO-22476-11 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-11-TC - Tracked Changes. Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-12 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-14 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-15 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-1-TC - Tracked Changes. Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-2 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-3 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-4 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-5 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-5-TC - Tracked Changes. Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-6 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-7 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22476-9 - Geotechnical investigation and testing. Field testing
- BS-EN-ISO-22477-1 - Geotechnical investigation and testing. Testing of geotechnical structures
- BS-EN-ISO-22477-10 - Geotechnical investigation and testing. Testing of geotechnical structures
- BS-EN-ISO-22477-2 - Geotechnical investigation and testing. Testing of geotechnical structures
- BS-EN-ISO-22477-4 - Geotechnical investigation and testing. Testing of geotechnical structures
- BS-EN-ISO-22477-5 - Geotechnical investigation and testing. Testing of geotechnical structures
- BS-ISO-24057 - Geotechnics. Array measurement of microtremors to estimate shear wave velocity profile
- DD-CEN-ISO-17892-6 - Geotechnical investigation and testing. Laboratory testing of soils
- DD-CEN-ISO-22475-2 - Geotechnical investigation and testing. Sampling methods and groundwater measurements
- DD-CEN-ISO-22475-3 - Geotechnical investigation and testing. Sampling methods and groundwater measurements
- DD-CEN-ISO-22476-11 - Geotechnical investigation and testing. Field testing
- DD-ENV-1998-5 - Eurocode 8: Design provisions for earthquake resistance of structures
- PD-6694-1 - Recommendations for the design of structures subject to traffic loading to BS EN 19971:2004+A1:2013
- PD-CEN-17006 - Earthworks. Continuous Compaction Control (CCC)
- PD-CEN-17693-1 - Earthworks. Soil treatment tests
- PD-CEN-17693-2 - Earthworks. Soil treatment tests
- PD-CEN-ISO-24283-1 - Geotechnical investigation and testing. Qualification criteria and assessment
- PD-CEN-ISO-24283-2 - Geotechnical investigation and testing. Qualification criteria and assessment
- PD-CEN-ISO-24283-3 - Geotechnical investigation and testing. Qualification criteria and assessment
IEC:
ISO:
- ISO-12930 - Seismic design examples based on ISO 23469
- ISO-13793 - Thermal performamce of buildings - Thermal design of foundations to avoid frost heave
- ISO-14688-1 - Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description
- ISO-14688-1-AM1 - - Amendment 1
- ISO-14688-2 - Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification
- ISO-14688-2-AM1 - - Amendment 1
- ISO-14689 - Geotechnical investigation and testing - Identification, description and classification of rock
- ISO-14689-1 - Geotechnical investigation and testing - Identification and classification of rock - Part 1: Identification and description
- ISO-17628 - Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger
- ISO-17892-1 - Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
- ISO-17892-10 - Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests
- ISO-17892-11 - Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests
- ISO-17892-12 - Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits
- ISO-17892-12-AM1 - - Amendment 1
- ISO-17892-12-AM2 - - Amendment 2: Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits - Amendment 2
- ISO-17892-1-AM1 - - Amendment 1: Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content - Amendment 1
- ISO-17892-2 - Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density
- ISO-17892-3 - Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
- ISO-17892-4 - Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
- ISO-17892-5 - Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test
- ISO-17892-6 - Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test
- ISO-17892-7 - Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test
- ISO-17892-8 - Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test
- ISO-17892-9 - Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils
- ISO-18674-1 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 1: General rules
- ISO-18674-2 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers
- ISO-18674-3 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers
- ISO-18674-3-AM1 - - Amendment 1
- ISO-18674-4 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 4: Measurement of pore water pressure: Piezometers
- ISO-18674-5 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 5: Stress change measurements by total pressure cells (TPC)
- ISO-18674-8 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 8: Measurement of loads: Load cells
- ISO-22282-1 - Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules
- ISO-22282-2 - Geotechnical investigation and testing - Geohydraulic testing - Part 2: Water permeability tests in a borehole using open systems
- ISO-22282-3 - Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure tests in rock
- ISO-22282-4 - Geotechnical investigation and testing - Geohydraulic testing - Part 4: Pumping tests
- ISO-22282-5 - Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests
- ISO-22282-6 - Geotechnical investigation and testing - Geohydraulic testing - Part 6: Water permeability tests in a borehole using closed systems
- ISO-22475-1 - Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for the sampling of soil, rock and groundwater
- ISO-22475-2 - Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 2: Qualification criteria for enterprises and personnel
- ISO-22475-3 - Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party
- ISO-22476-1 - Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test
- ISO-22476-10 - Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test
- ISO-22476-11 - Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometer test
- ISO-22476-12 - Geotechnical investigation and testing - Field testing - Part 12: Mechanical cone penetration test (CPTM)
- ISO-22476-14 - Geotechnical investigation and testing - Field testing - Part 14: Borehole dynamic probing
- ISO-22476-15 - Geotechnical investigation and testing - Field testing - Part 15: Measuring while drilling
- ISO-22476-2 - Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing
- ISO-22476-2-AM1 - Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing - Amendment 1
- ISO-22476-3 - Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test
- ISO-22476-3-AM1 - Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1
- ISO-22476-4 - Geotechnical investigation and testing - Field testing - Part 4: Prebored pressuremeter test by Ménard procedure
- ISO-22476-5 - Geotechnical investigation and testing - Field testing - Part 5: Prebored pressuremeter test
- ISO-22476-6 - Geotechnical investigation and testing - Field testing - Part 6: Self-boring pressuremeter test
- ISO-22476-7 - Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test
- ISO-22476-8 - Geotechnical investigation and testing - Field testing - Part 8: Full displacement pressuremeter test
- ISO-22477-1 - Geotechnical investigation and testing - Testing of geotechnical structures - Part 1: Testing of piles: static compression load testing
- ISO-22477-10 - Geotechnical investigation and testing - Testing of geotechnical structures - Part 10: Testing of piles: rapid load testing
- ISO-22477-2 - Geotechnical investigation and testing - Testing of geotechnical structures - Part 2: Testing of piles: Static tension load testing
- ISO-22477-4 - Geotechnical investigation and testing - Testing of geotechnical structures - Part 4: Testing of piles: dynamic load testing
- ISO-22477-5 - Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of grouted anchors
- ISO-23469 - Bases for design of structures - Seismic actions for designing geotechnical works
- ISO-24057 - Geotechnics - Array measurement of microtremors to estimate shear wave velocity profile
- ISO-24283-1 - Geotechnical investigation and testing - Qualification criteria and assessment - Part 1: Qualified technician and qualified operator
- ISO-24283-2 - Geotechnical investigation and testing - Qualification criteria and assessment - Part 2: Responsible expert
- ISO-24283-3 - Geotechnical investigation and testing - Qualification criteria and assessment - Part 3: Qualified enterprise
Other SDOs:
- DIN-1054 - Subsoil - Verification of the safety of earthworks and foundations - Supplementary rules to DIN EN 1997-1
- DIN-18121-2 - Soil, investigation and testing - Watercontent - Part 2: Determination by rapid methods
- DIN-EN-12794 - Precast Concrete Products - Foundation Piles
- DIN-EN-14199 - Execution of special geotechnical work - Micropiles; German version EN 14199:2015
- DIN-EN-14475 - Execution of Special Geotechnical Works - Reinforced Fill
- DIN-EN-14653-1 - Part 1: Product Specifications, Manually Operated Hydraulic Shoring Systems for Groun
- DIN-EN-14653-2 - Part 2: Assessment by Calculation or Test, Manually Operated Hydraulic Shoring Systems
- DIN-EN-14679 - Execution of Special Geotechnical Works, Deep Mixing
- DIN-EN-14731 - Execution of Special Geotechnical Works - Ground Treatment by Deep Vibration
- DIN-EN-15237 - Execution of Special Geotechnical Works - Vertical Drainage
- DIN-EN-1997-1 - Eurocode 7: Geotechnical design - Part 1: General rules; German version EN 1997-1:2004 + AC:2009 + A1:2013
- DIN-EN-ISO-14688-1 - Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2002 + Amd 1:2013)
- DIN-EN-ISO-14688-2 - Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2004 + Amd 1:2013)
- DIN-EN-ISO-14689-1 - Part 1: Identification & Description, Geotechnical Investigation & Testing - Identific
- DIN-EN-ISO-22475-1 - Part 1: Technical Principles for Execution, Geotechnical Investigation & Testing - Sam
- DIN-EN-ISO-22476-2 - Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing
- DIN-EN-ISO-22476-3 - Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005 + Amd 1:2011)
- EN-12699 - Execution of special geotechnical works - Displacement piles
- EN-12794 - Precast Concrete Products - Foundation Piles
- EN-13331-1 - Part 1: Product Specifications, Trench Lining Systems
- EN-13331-2 - Part 2: Assessment by Calculation or Test, Trench Lining Systems
- EN-14199 - Execution of special geotechnical works - Micropiles
- EN-14475 - Execution of Special Geotechnical Works - Reinforced Fill
- EN-14490 - Execution of Special Geotechnical Works - Soil Nailing
- EN-14653-1 - Part 1: Product Specifications, Manually Operated Hydraulic Shoring Systems for Groun
- EN-14653-2 - Part 2: Assessment by Calculation or Test, Manually Operated Hydraulic Shoring Systems
- EN-14679 - Execution of Special Geotechnical Works, Deep Mixing
- EN-14731 - Execution of Special Geotechnical Works - Ground Treatment by Deep Vibration
- EN-15237 - Execution of Special Geotechnical Works - Vertical Drainage
- EN-1536 - Execution of special geotechnical work - Bored piles
- EN-1537 - Execution of special geotechnical works - Ground anchors
- EN-1538 - Execution of special geotechnical work - Diaphragm walls
- EN-16228-1 - Drilling and foundation equipment - Safety - Part 1: Common requirements
- EN-16228-2 - Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
- EN-16228-3 - Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
- EN-16228-4 - Drilling and foundation equipment - Safety - Part 4: Foundation equipment
- EN-16228-5 - Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
- EN-16228-6 - Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
- EN-16228-7 - Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
- EN-16907-1 - Earthworks - Part 1: Principles and general rules
- EN-16907-2 - Earthworks - Part 2: Classification of materials
- EN-16907-3 - Earthworks - Part 3: Construction procedures
- EN-16907-4 - Earthworks - Part 4: Soil treatment with lime and/or hydraulic binders
- EN-16907-5 - Earthworks - Part 5: Quality control
- EN-16907-6 - Earthworks - Part 6: Land reclamation earthworks using dredged hydraulic fill
- EN-1997-1(NA) - Uk National Annex To Eurocode 7, Geotechnical Design, General Rules
- EN-1997-2 - Part 2: Ground Investigation & Testing, Eurocode 7: Geotechnical Design
- EN-1997-2(NA) - Uk National Annex To Eurocode 7, Geotechnical Design, Ground Investigation & Testing
- EN-1999-1-4 - Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
- EN-ISO-14688-1 - Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description
- EN-ISO-14688-2 - Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification - Amendment 1 (ISO 14688-2:2004/Amd 1:2013)
- EN-ISO-14689-1 - Geotechnical investigation and testing - Identification and classification of rock - Part 1: Identification and description
- EN-ISO-17628 - Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger
- EN-ISO-17892-1 - Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
- EN-ISO-17892-12 - Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits
- EN-ISO-17892-2 - Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density
- EN-ISO-17892-3 - Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
- EN-ISO-17892-4 - Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
- EN-ISO-17892-5 - Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test
- EN-ISO-17892-6 - Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test
- EN-ISO-17892-8 - Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test
- EN-ISO-17892-9 - Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils
- EN-ISO-18674-1 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 1: General rules
- EN-ISO-18674-2 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers
- EN-ISO-18674-3 - Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation. Measurement of displacements across a line: Inclinometers
- EN-ISO-22282-1 - Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2012)
- EN-ISO-22282-2 - Geotechnical investigation and testing - Geohydraulic testing - Part 2: Water permeability tests in a borehole using open systems (ISO 22282-2:2012)
- EN-ISO-22282-3 - Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure tests in rock (ISO 22282-3:2012)
- EN-ISO-22282-5 - Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests (ISO 22282-5:2012)
- EN-ISO-22282-6 - Geotechnical investigation and testing - Geohydraulic testing - Part 6: Water permeability tests in a borehole using closed systems (ISO 22282-6:2012)
- EN-ISO-22475-1 - Part 1: Technical Principles for Execution, Geotechnical Investigation & Testing - Sam
- EN-ISO-22476-10 - Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test (ISO 22476-10:2017)
- EN-ISO-22476-11 - Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometer test
- EN-ISO-22476-12 - Part 12: Mechanical Cone Penetration Test (Cptm), Geotechnical Investigation & Testing
- EN-ISO-22476-15 - Geotechnical investigation and testing - Field testing - Part 15: Measuring while drilling
- EN-ISO-22476-2 - Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing (ISO 22476-2:2005)
- EN-ISO-22476-3 - Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005)
- EN-ISO-22476-4 - Geotechnical investigation and testing - Field testing - Part 4: M+¬nard pressuremeter test (ISO 22476-4:2012)
- EN-ISO-22476-5 - Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012)
- EN-ISO-22476-7 - Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test (ISO 22476-7:2012)
- EN-ISO-22477-10 - Geotechnical investigation and testing - Testing of geotechnical structures - Part 10: Testing of piles: rapid load testing
- JIS-A-5525 - Steel pipe piles
- JIS-A-5528 - Hot rolled steel sheet piles
- JIS-A-5530 - Steel pipe sheet piles
- SIS-CEN-ISO/TS-17892-1 - Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO/TS 17892-1:2004)
- SIS-CEN-ISO/TS-17892-10 - Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)
- SIS-CEN-ISO/TS-17892-11 - Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Determination of permeability by constant and falling head (ISO/TS 17892-11:2004)
- SIS-CEN-ISO/TS-17892-2 - Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density on fine-grained soil (ISO/TS 17892-2:2004)
- SIS-CEN-ISO/TS-17892-3 - Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method (ISO/TS 17892-3:2004)
- SIS-CEN-ISO/TS-17892-4 - Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
- SIS-CEN-ISO/TS-17892-7 - Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test on fine-grained soil (ISO/TS 17892-7:2004)
- SIS-CEN-ISO/TS-17892-8 - Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test (ISO/TS 17892-8:2004)
- SIS-CEN-ISO/TS-17892-9 - Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soil (ISO/TS 17892-9:2004)
- SIS-CEN-ISO/TS-22476-10 - Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test
- SIS-CEN-ISO/TS-22476-11 - Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometer test (ISO/TS 22476-11:2005)
- SIS-CEN/TS-17006 - Earthworks - Continuous Compaction Control (CCC)
- SIS-ISO/TS-13399-4 - Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items (ISO/TS 13399-4:2021, IDT)
- SS-EN-1017 - Chemicals used for treatment of water intended for human consumption - Half-burnt dolomite
- SS-EN-1065 - Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests
- SS-EN-12063 - Execution of special geotechnical work - Sheet-pile walls
- SS-EN-12699 - Execution of special geotechnical works - Displacement piles
- SS-EN-12715 - Execution of special geotechnical work - Grouting
- SS-EN-12716 - Execution of special geotechnical work - Jet grouting
- SS-EN-12794 - Precast concrete products - Foundation piles
- SS-EN-13331-1 - Trench lining systems - Part 1: Product specifications
- SS-EN-13331-2 - Trench lining systems - Part 2: Assessment by calculation or test
- SS-EN-14199 - Execution of special geotechnical works - Micropiles
- SS-EN-14475 - Execution of special geotechnical works - Reinforced fill
- SS-EN-14490 - Execution of special geotechnical works - Soil nailing
- SS-EN-14653-1 - Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specification
- SS-EN-14653-2 - Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test
- SS-EN-14679 - Execution of special geotechnical works - Deep mixing
- SS-EN-14731 - Execution of special geotechnical works - Ground treatment by deep vibration
- SS-EN-15237 - Execution of special geotechnical works - Vertical drainage
- SS-EN-1536 - Execution of special geotechnical work - Bored piles
- SS-EN-1537 - Execution of special geotechnical works - Ground anchors
- SS-EN-1538 - Execution of special geotechnical work - Diaphragm walls
- SS-EN-16228-1 - Drilling and foundation equipment - Safety - Part 1: Common requirements
- SS-EN-16228-2 - Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
- SS-EN-16228-3 - Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
- SS-EN-16228-4 - Drilling and foundation equipment - Safety - Part 4: Foundation equipment
- SS-EN-16228-5 - Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
- SS-EN-16228-6 - Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
- SS-EN-16228-7 - Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
- SS-EN-1665 - Hexagon bolts with flange - Heavy series
- SS-EN-16907-1 - Earthworks - Part 1: Principles and general rules
- SS-EN-16907-2 - Earthworks - Part 2: Classification of materials
- SS-EN-16907-3 - Earthworks - Part 3: Construction procedures
- SS-EN-16907-4 - Earthworks - Part 4: Soil treatment with lime and/or hydraulic binders
- SS-EN-16907-5 - Earthworks - Part 5: Quality control
- SS-EN-16907-6 - Earthworks - Part 6: Land reclamation earthworks using dredged hydraulic fill
- SS-EN-16907-7 - Earthworks - Part 7: Hydraulic placement of extractive waste
- SS-EN-17542-1 - Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard
- SS-EN-17542-2 - Earthworks - Geotechnical laboratory tests - Part 2: Fragmentability test standard
- SS-EN-17542-3 - Earthworks - Geotechnical laboratory tests - Part 3: Methylene blue value VBS on soils and rocks
- SS-EN-17685-1 - Earthworks - Chemical tests - Part 1: Determination of loss on ignition
- SS-EN-1990 - Eurocode - Basis of structural and geotechnical design
- SS-EN-1997-1 - Eurocode 7: Geotechnical design - Part 1: General rules
- SS-EN-1997-1-AM1 - Eurocode 7: Geotechnical design - Part 1: General rules
- SS-EN-1999-1-4 - Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
- SS-EN-1999-1-5 - Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
- SS-EN-996 - Piling equipment - Safety requirements
- SS-EN-996-AM1 - Piling equipment - Safety requirements
- SS-EN-996-AM2 - Piling equipment - Safety requirements
- SS-EN-ISO-10772 - Geotextiles - Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions (ISO 10772:2012)
- SS-EN-ISO-10776 - Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012)
- SS-EN-ISO-13793 - Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001)
- SS-EN-ISO-14688-1 - Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2017)
- SS-EN-ISO-14688-1-AM1 - Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description - Amendment 1 (ISO 14688-1:2002/Amd 1:2013)
- SS-EN-ISO-14688-2 - Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2017)
- SS-EN-ISO-14688-2-AM1 - Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification - Amendment 1 (ISO 14688-2:2004/Amd 1:2013)
- SS-EN-ISO-14689 - Geotechnical investigation and testing - Identification, description and classification of rock (ISO 14689:2017)
- SS-EN-ISO-14689-1 - Geotechnical investigation and testing - Identification and classification of rock - Part 1: Identification and description (ISO 14689-1:2003)
- SS-EN-ISO-17628 - Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger (ISO 17628:2015)
- SS-EN-ISO-17892-1 - Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO 17892-1:2014)
- SS-EN-ISO-17892-10 - Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018)
- SS-EN-ISO-17892-11 - Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019)
- SS-EN-ISO-17892-12 - Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits (ISO 17892-12:2018)
- SS-EN-ISO-17892-12-AM1 - Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits - Amendment 1 (ISO 17892-12:2018/Amd 1:2021)
- SS-EN-ISO-17892-12-AM2 - Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits - Amendment 2 (ISO 17892-12:2018/Amd 2:2022)
- SS-EN-ISO-17892-1-AM1 - Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content - Amendment 1 (ISO 17892-1:2014/Amd 1:2022)
- SS-EN-ISO-17892-2 - Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014)
- SS-EN-ISO-17892-3 - Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO 17892-3:2015, Corrected version 2015-12-15)
- SS-EN-ISO-17892-4 - Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016)
- SS-EN-ISO-17892-5 - Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test (ISO 17892-5:2017)
- SS-EN-ISO-17892-6 - Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test (ISO 17892-6:2017)
- SS-EN-ISO-17892-7 - Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test (ISO 17892-7:2017)
- SS-EN-ISO-17892-8 - Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test (ISO 17892-8:2018)
- SS-EN-ISO-17892-9 - Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils (ISO 17892-9:2018)
- SS-EN-ISO-18674-1 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 1: General rules (ISO 18674-1:2015)
- SS-EN-ISO-18674-2 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers (ISO 18674-2:2016)
- SS-EN-ISO-18674-3 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers (ISO 18674-3:2017)
- SS-EN-ISO-18674-4 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 4: Measurement of pore water pressure: Piezometers (ISO 18674-4:2020)
- SS-EN-ISO-18674-5 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 5: Stress change measurements by total pressure cells (TPC) (ISO 18674-5:2019)
- SS-EN-ISO-18674-8 - Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 8: Measurement of loads: Load cells (ISO 18674-8:2023)
- SS-EN-ISO-21809-2 - Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
- SS-EN-ISO-21945 - Solid biofuels - Simplified sampling method for small scale applications (ISO 21945:2020)
- SS-EN-ISO-22282-1 - Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2012)
- SS-EN-ISO-22282-2 - Geotechnical investigation and testing - Geohydraulic testing - Part 2: Water permeability tests in a borehole using open systems (ISO 22282-2:2012)
- SS-EN-ISO-22282-3 - Geotechnical investigation and testing - Geohydraulic testing - Part 3: Water pressure tests in rock (ISO 22282-3:2012)
- SS-EN-ISO-22282-4 - Geotechnical investigation and testing - Geohydraulic testing - Part 4: Pumping tests (ISO 22282-4:2021)
- SS-EN-ISO-22282-5 - Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests (ISO 22282-5:2012)
- SS-EN-ISO-22282-6 - Geotechnical investigation and testing - Geohydraulic testing - Part 6: Water permeability tests in a borehole using closed systems (ISO 22282-6:2012)
- SS-EN-ISO-22475-1 - Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for the sampling of soil, rock and groundwater (ISO 22475-1:2021)
- SS-EN-ISO-22476-1 - Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test (ISO 22476-1:2022)
- SS-EN-ISO-22476-10 - Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test (ISO 22476-10:2017)
- SS-EN-ISO-22476-11 - Geotechnical investigation and testing - Field testing - Part 11: Flat dilatometer test (ISO 22476-11:2017)
- SS-EN-ISO-22476-12 - Geotechnical investigation and testing· Field testing· Part 12: Mechanical cone penetration test (CPTM) (ISO 22476-12:2009)
- SS-EN-ISO-22476-14 - Geotechnical investigation and testing - Field testing - Part 14: Borehole dynamic probing (ISO 22476-14:2020)
- SS-EN-ISO-22476-15 - Geotechnical investigation and testing - Field testing - Part 15: Measuring while drilling (ISO 22476-15:2016)
- SS-EN-ISO-22476-2 - Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing (ISO 22476-2:2005)
- SS-EN-ISO-22476-2-AM1 - Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing - Amendment 1 (ISO 22476-2:2005/Amd 1:2011)
- SS-EN-ISO-22476-3 - Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005)
- SS-EN-ISO-22476-3-AM1 - Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1 (ISO 22476-3:2005/Amd 1:2011)
- SS-EN-ISO-22476-4 - Geotechnical investigation and testing - Field testing - Part 4: Prebored pressuremeter test by Ménard procedure (ISO 22476-4:2021)
- SS-EN-ISO-22476-5 - Geotechnical investigation and testing - Field testing - Part 5: Prebored pressuremeter test (ISO 22476-5:2023)
- SS-EN-ISO-22476-6 - Geotechnical investigation and testing - Field testing - Part 6: Self boring pressuremeter test (ISO 22476-6:2018)
- SS-EN-ISO-22476-7 - Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test (ISO 22476-7:2012)
- SS-EN-ISO-22476-8 - Geotechnical investigation and testing - Field testing - Part 8: Full displacement pressuremeter test (ISO 22476-8:2018)
- SS-EN-ISO-22476-9 - Geotechnical investigation and testing - Field testing - Part 9: Field vane test (FVT and FVT-F) (ISO 22476 9:2020)
- SS-EN-ISO-22477-1 - Geotechnical investigation and testing - Testing of geotechnical structures - Part 1: Testing of piles: static compression load testing (ISO 22477-1:2018)
- SS-EN-ISO-22477-10 - Geotechnical investigation and testing - Testing of geotechnical structures - Part 10: Testing of piles: rapid load testing (ISO 22477-10:2016)
- SS-EN-ISO-22477-4 - Geotechnical investigation and testing - Testing of geotechnical structures - Part 4: Testing of piles: dynamic load testing (ISO 22477-4:2018)
- SS-EN-ISO-22477-5 - Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of grouted anchors (ISO 22477-5:2018)
- SS-EN-ISP-12063-1 - Information technology - Internal standardized profiles AMH3n - Message handling systems - EdI messaging - Part 1: EDIMG MHSservice support (ISO/IEC ISP 12 063-1:1995)
- SS-EN-ISP-12063-2 - Information technology - Internal standardized profiles AMH3n - Message handling systems - EdI messaging - Part 2: AMH31 - EDIMG content (Regional variant of ISO/IEC ISP 12 063-2:1995)
- SS-EN-ISP-12063-3 - Information technology - Internal standardized profiles AMH3n - Message handling systems - EdI messaging - Part 3: AMH32 - EDIMG requirements for message transfer (P1) (ISO/IEC ISP 12 063-3:1995)
- SS-EN-ISP-12063-4 - Information technology - Internal standardized profiles AMH3n - Message handling systems - EdI messaging - Part 4: AMH33 - EDIMG requirements for MTS access (P3) (ISO/IEC ISP12 063-4:1996)
- SS-EN-ISP-12063-5 - Information technology - Internal standardized profiles AMH3n - Message handling systems - EdI messaging - Part 5: AMH34 - EDIMG requirements for enhanced MS access (P7) (ISO/IEC ISP 12 063-5:1995)
- SS-ISO-11565 - Road vehicles - Spark-plugs - Test methods and requirements (ISO 11565:2006, IDT)
- UNE-EN-1536 - Execution of special geotechnical work - Bored piles
- UNE-EN-1538 - Execution of special geotechnical work - Diaphragm walls
- UNE-EN-1997-1 - Eurocode 7: Geotechnical design - Part 1: General rules
- UNE-EN-ISO-17892-1 - Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
- UNE-EN-ISO-17892-2 - Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density
- UNE-EN-ISO-22476-1 - Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test
- UNE-EN-ISO-22476-7 - Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test