Document Center is acquired by Nimonik

Scope

1.1 This guide covers information pertaining to a broad spectrum of practices and applications of soil atmosphere sampling, including sample recovery and handling, sample analysis, data interpretation, and data reporting. This guide can increase the awareness of soil gas monitoring practitioners concerning important aspects of the behavior of the soil-water-gas-contaminant system in which this monitoring is performed, as well as inform them of the variety of available techniques of each aspect of the practice. Appropriate applications of soil gas monitoring are identified, as are the purposes of the various applications. Emphasis is placed on soil gas contaminant determinations in certain application examples.

1.2 This guide suggests a variety of approaches useful to successfully monitor vadose zone contaminants with instructions that offer direction to those who generate and use soil gas data.

1.3 This guide does not recommend a standard practice to follow in all cases nor does it recommend definite courses of action. The success of any one soil gas monitoring methodology is strongly dependent upon the environment in which it is applied.

1.4 Concerns of practitioner liability or protection from or release from such liability, or both, are not addressed by this guide.

1.5 This guide is organized into the following sections and subsections that address specific segments of the practice of monitoring soil gas:

1.6 This guide does not purport to set standard levels of acceptable risk. Use of this guide for purposes of risk assessment is wholly the responsibility of the user.

1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.9 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.

Significance and Use

Application of Soil Gas Monitoring—Soil gas monitoring is an extremely versatile method in that it can be adapted to conform to the requirements of dissimilar industries for a wide variety of applications. A number of soil gas techniques have been utilized in the agricultural (21), petroleum (22, 23) and minerals (24) industries. Certain applications have been exercised for well over 50 years. Soil gas monitoring has been utilized in research efforts, including the monitoring of underground coal gasification retorts (25). Application to the environmental industry is comparably recent but very effective as a rapid and relatively inexpensive method of detecting volatile contaminants in the vadose zone. Field screening, of which soil gas monitoring is a basic component, has been demonstrated to be effective for selection of suitable and representative samples for other more costly and definitive monitoring methods (26). Soil gas monitoring is useful to assess the extent of groundwater contamination for certain contaminants and field environments (27). Soil gas monitoring is also a viable method of monitoring subsurface contaminant discharges from underground storage tanks (28). New applications of the soil gas monitoring are periodically developed and published in the referenced literature. The method may be useful in the study of unsaturated flow. In most instances, the method can make use of very light-weight, portable and inexpensive tools made from commonly available materials. Soil gas monitoring has become a widely accepted method for locating subsequent environmental monitoring and remediation activities such as groundwater monitoring wells, contaminant product recovery wells or excavations to recover contaminated soil. Soil gas monitoring has made a significant contribution to groundwater monitoring and remedial planning on sites that fall under the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) (29). This method is highly useful at the initiation of Phase II environmental assessment action in determining the presence of volatile organic contamination of real property in a pending sale.

In any application, soil gas monitoring can be performed over a wide range of both spatial and temporal designs. Spatial designs include soil gas sampling in profiles or grid patterns at a single depth or multiple depths. Multiple depth sampling is particularly useful for contaminant determinations in cases with complex soil type distribution and multiple sources. Depth profiling can also be useful in the determination of the most appropriate depth(s) at which to monitor soil gas, as well as the demonstration of migration and degradation processes in the vadose zone. Temporal designs include the long-term monitoring of the vadose zone for the appearance of volatile organic contaminants from known potential sources such as underground storage tanks and solid waste landfills. Temporal designs are especially useful in monitoring the effectiveness of contaminant remediation efforts.

Soil gas monitoring in the vadose zone is an ideal reconnaissance tool and screening technique in most applications. However, site specific and contaminant specific limitations can cause this technique to be unsuccessful in meeting project objectives. Caveats exist in all soil gas monitoring procedures that can frustrate efforts to successfully apply the method to any application.

Limitations—The most significant limitation on soil gas monitoring is the inability to utilize the method as a stand alone technique. Soil gas monitoring does not provide repeatable quantitative information over time due primarily to the dynamic nature of phase equilibria in the vadose zone and secondarily to unavoidable inconsistencies in sampling practice. As a result of geologic variability in the vadose zone and the multitude of unique sampling devices currently being used in the field, quality assurance and quality control protocol, discussed in 6.4, cannot provide the rigor required as in a test method. For these reasons, soil gas data in itself cannot be used to provide definitive answers about the location or absence of buried contaminants. Moreover, the success of any soil gas monitoring method is strongly dependent upon effects related to geologic variation and moisture content in the sampling horizon as well as the physical properties of the target contaminants.

False negative results can occur as a direct result of the incompatibility of a specific procedure with the properties of the sampling horizon or the target contaminants, or both. Soil gas data cannot be used to establish bulk volume or the commerciality of buried petroleum, natural gas, or ore bodies.

With the necessary analytical procedures, soil gas can be examined for compositional anomalies, a very useful technique for multiple source problems. In some instances, contaminant occurrences are limited to single species (compounds, mercury, etc.), however more often than not the contaminant source is a mixture of organic chemicals that have a unique chemical compositional character consisting of both normally evaluated priority pollutants and nonpriority pollutant chemicals that may be overlooked. By identifying and using compositional information, many problematic site situations such as degradation can be minimized by targeting the more refractory compounds associated with the contaminant occurrence. This interpretive method is impossible to model for an industry wide application due to variation in methods and technique.

A basic limitation of the technique is that due to the ease of procurement and use of soil gas sampling devices, there is a tendency for inexperienced personnel to oversimplify any and all aspects of the method. Investigators must consider the experience level and technical ability of personnel who acquire soil gas samples and attempt to interpret the results. Certain procedural facets are not trivial, as discussed in Section 6. The results of certain techniques tend to be affected by minor variations in procedure despite apparent adherence to a “Standard Operating Procedure.”

Atmospheric air contamination is not a trivial problem corrected by simple device-oriented field practice. Many sampling systems recover very large volumes of “soil gas” that may actually represent a mixture of soil gas and atmospheric air. This mixing occurs through the introduction of ambient air adjacent to the sampling device and through macroporous pathways in the soil which are far from the sampling device. Some environmental investigators avoid the impact of this problem by reasoning that contaminant quantities in the soil are so great that they are detected despite atmospheric mixing. For qualitative approaches with non-rigorous quality assurance/quality control (QA/QC) objectives this mixing problem can be insignificant. For detection of compounds that exhibit only marginal partitioning preference for the free vapor phase, the mixing problem can be a fatal flaw in procedure. Moreover, contaminant concentration and composition investigations can be rendered useless by variations in the magnitude of mixing at various sample locations and depths in a survey area.

Comments on Limitations of Soil Gas Monitoring—Many investigators believe that soil gas monitoring is not an effective vadose zone monitoring method for certain volatile organic applications, in certain geographic regions or during certain seasons of the year, or both. The applicability of soil gas monitoring is controlled by physical and chemical properties and processes in the subsurface and not by factors that are obvious at or above the surface. For example, one common misconception is that soil gas monitoring is not effective during the winter season. The impacts upon soil gas measurement of elevated soil pore water content, reduced vadose zone temperature and the presence of frost, typical of numerous regions in winter, are obvious for many facets of most soil gas monitoring methods. Modification of standard operating procedure, such as an increase in sampling depth, or selection of another soil gas monitoring method altogether can minimize the negative impacts of seasonal field conditions. It is important to understand that the responsibility for success or failure in soil gas monitoring can reside as much in the planning phase of a survey, including the method chosen, as in factors controlling the chemical and physical processes at work in the subsurface. Even with apparently ideal field conditions and with a carefully planned survey, soil gas monitoring can succeed or fail due to unknown factors controlling contaminant migration and emplacement. Soil gas monitoring is no different than any other measurement method, in that investigators must maximize effort in planning and implementation of procedure to maximize the likelihood of success.

Keywords

contaminant; environmental monitoring; geochemistry; ground water; Henry's law; petroleum hydrocarbon; sampling; soil gas; unsaturated flow; vadose zone; vapor monitoring; volatile organic compound; ICS Number Code 91.120.25 (Seismic and vibration protection); 93.020 (Earth works. Excavations. Foundation construction. Underground works)

To find similar documents by ASTM Volume:

04.08 (Soil and Rock (I): D420 - D5876)

To find similar documents by classification:

91.120.25 (Seismic and vibration protection Vibrations and vibration measurements, see 17.160)

93.020 (Earthworks. Excavations. Foundation construction. Underground works Including geotechnics Earth-moving machinery, see 53.100)

This document comes with our free Notification Service, good for the life of the document.

This document is available in either Paper or PDF format.