Document Center List of Standards on Thermal Insulation Of Buildings Thermal Insulation In General, See 27.220 Thermal Insulating Materials, See 91.100.60
ICS Code 91.120.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1014 - Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
- ASTM-C1058 - Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
- ASTM-C1061 - Test Method for Thermal Transmission Properties of Non-Homogeneous Insulation Panels Installed Vertically (Withdrawn 1995)
- ASTM-C1071 - Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
- ASTM-C1094 - Standard Guide for Flexible Removable Insulation Covers (Withdrawn 2010)
- ASTM-C1139 - Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications (Withdrawn 2019)
- ASTM-C1149 - Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
- ASTM-C1155 - Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
- ASTM-C1199 - Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
- ASTM-C1313 - Standard Specification for Sheet Radiant Barriers for Building Construction Applications
- ASTM-C1321 - Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
- ASTM-C1340 - Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
- ASTM-C1363 - Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
- ASTM-C1373 - Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
- ASTM-C1374 - Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
- ASTM-C1485 - Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
- ASTM-C1497 - Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
- ASTM-C1594 - Standard Specification for Polyimide Rigid Cellular Thermal Insulation
- ASTM-C1859 - Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind Netting) for Enclosed Applications of the Building Thermal Envelope
- ASTM-C236 - Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box (Withdrawn 2001)
- ASTM-C518 - Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM-C532 - Specification for Structural Insulating Formboard (Cellulosic Fiber) (Withdrawn 1992)
- ASTM-C687 - Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
- ASTM-C727 - Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
- ASTM-C755 - Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
- ASTM-C976 - Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box (Withdrawn 2002)
- ASTM-E1410 - Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings (Withdrawn 2014)
- ASTM-E1423 - Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
- ASTM-E2025 - Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies (Withdrawn 2015)
- ASTM-E2357 - Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
- ASTM-E2797 - Standard Practice for Building Energy Performance Assessment for a Building Involved in a Real Estate Transaction
- ASTM-E283 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
- ASTM-E3026 - Standard Guide for Readily Observable Moisture Affected Materials and Conditions Conducive to Elevated Moisture in Commercial Buildings: Visual Moisture Assessment Process
- ASTM-E3054 - Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes
- ASTM-E3069 - Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall
- ASTM-E3158 - Standard Test Method for Measuring the Air Leakage Rate of a Large or Multizone Building
- ASTM-E970 - Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
BSI:
- BS-3533 - Glossary of thermal insulation terms
- BS-5618 - Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems
- BS-7021 - Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam
- BS-7386 - Specification for draughtstrips for the draught control of existing doors and windows in housing (including test methods)
- BS-7456 - Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems
- BS-7880 - Code of practice for draught control of existing doors and windows in housing using draughtstrips
- BS-8207 - Code of practice for energy efficiency in buildings
- BS-8211-1 - Energy efficiency in housing. Code of practice for energy efficient refurbishment of housing
- BS-874 - Determining Thermal Insulating Properties With Definitions of Thermal Insulating Terms
- BS-874-1 - Part 1: Introduction, Definitions & Principles of Measurement, Determining Thermal Insulat
- BS-EN-12114 - Thermal performance of buildings. Air permeability of building components and building elements. Laboratory test methods
- BS-EN-12524 - Building materials and products. Hygrothermal properties. Tabulated design values
- BS-EN-12664 - Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Dry and moist products of medium and low thermal resistance
- BS-EN-12667 - Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Products of high and medium thermal resistance
- BS-EN-12898 - Glass in building. Determination of the emissivity
- BS-EN-13363-1 - Solar protection devices combined with glazing. Calculation of solar and light transmittance. Simplified method
- BS-EN-13363-2 - Solar protection devices combined with glazing. Calculation of total solar energy transmittance and light transmittance. Detailed calculation method
- BS-EN-13829 - Thermal performance of buildings. Determination of air permeability of buildings. Fan pressurization method
- BS-EN-13947 - Thermal performance of curtain walling. Calculation of thermal transmittance
- BS-EN-14114 - Hygrothermal performance of building equipment and industrial installations. Calculation of water vapour diffusion. Cold pipe insulation systems
- BS-EN-14496 - Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards. Definitions, requirements and test methods
- BS-EN-14496-TC - Tracked Changes. Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards. Definitions, requirements and test methods
- BS-EN-14933 - Thermal insulation and light weight fill products for civil engineering applications. Factory made products of expanded polystyrene (EPS). Specification
- BS-EN-14934 - Thermal insulation and light weight fill products for civil engineering applications. Factory made products of extruded polystyrene foam (XPS). Specification
- BS-EN-15026 - Hygrothermal performance of building components and building elements. Assessment of moisture transfer by numerical simulation
- BS-EN-15026-TC - Tracked Changes. Hygrothermal performance of building components and building elements. Assessment of moisture transfer by numerical simulation
- BS-EN-15193-1 - Energy performance of buildings. Energy requirements for lighting
- BS-EN-15232 - Energy performance of buildings. Impact of Building Automation, Controls and Building Management
- BS-EN-15232-1 - Energy Performance of Buildings
- BS-EN-15255 - Energy performance of buildings. Sensible room cooling load calculation. General criteria and validation procedures
- BS-EN-15265 - Energy performance of buildings. Calculation of energy needs for space heating and cooling using dynamic methods. General criteria and validation procedures
- BS-EN-15900 - Energy efficiency services. Definitions and requirements
- BS-EN-16247-2-TC - Tracked Changes. Energy audits
- BS-EN-16783 - Thermal insulation products. Environmental Product Declarations (EPD). Product Category Rules (PCR) complementary to EN 15804 for factory made and in-situ formed products
- BS-EN-16783-TC - Tracked Changes. Thermal insulation products. Environmental Product Declarations (EPD). Product Category Rules (PCR) complementary to EN 15804 for factory made and in-situ formed products
- BS-EN-16798-13 - Energy performance of buildings. Ventilation for buildings
- BS-EN-16798-15 - Energy performance of buildings. Ventilation for buildings
- BS-EN-16798-17 - Energy performance of buildings. Ventilation for buildings
- BS-EN-16798-3 - Energy performance of buildings. Ventilation for buildings
- BS-EN-16798-3-TC - Tracked Changes. Energy performance of buildings. Ventilation for buildings
- BS-EN-16798-5-1 - Energy performance of buildings. Ventilation for buildings
- BS-EN-16798-5-2 - Energy performance of buildings. Ventilation for buildings
- BS-EN-16798-7 - Energy performance of buildings. Ventilation for buildings
- BS-EN-16798-7-TC - Tracked Changes. Energy performance of buildings. Ventilation for buildings
- BS-EN-16798-9 - Energy performance of buildings. Ventilation for buildings
- BS-EN-16883 - Conservation of cultural heritage. Guidelines for improving the energy performance of historic buildings
- BS-EN-16947-1 - Energy Performance of Buildings. Building Management System
- BS-EN-17423 - Energy performance of buildings. Determination and reporting of Primary Energy Factors (PEF) and CO2 emission coefficient. General Principles, Module M1-7
- BS-EN-1745 - Masonry and masonry products. Methods for determining thermal properties
- BS-EN-17886 - Thermal insulation products. Assessment of the susceptibility to mould growth. Laboratory test method
- BS-EN-17887-1 - Thermal performance of buildings. In situ testing of completed buildings
- BS-EN-17887-2 - Thermal performance of buildings. In situ testing of completed buildings
- BS-EN-17888-1 - Thermal performance of buildings. In situ testing of building test structures
- BS-EN-17888-2 - Thermal performance of buildings. In situ testing of building test structures
- BS-EN-17956 - Energy efficiency classes for technical insulation systems. Calculation method and applications
- BS-EN-1946-4 - Measurements by hot box methods
- BS-EN-1946-5 - Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties
- BS-EN-ISO-10077-1 - Thermal performance of windows, doors and shutters. Calculation of thermal transmittance
- BS-EN-ISO-10077-2 - Thermal performance of windows, doors and shutters. Calculation of thermal transmittance
- BS-EN-ISO-10211 - Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations
- BS-EN-ISO-10211-1 - Thermal Bridges in Building Construction, Heat Flows & Surface Temperatures, General C
- BS-EN-ISO-10211-2 - Thermal bridges in building construction. Heat flows and surface temperatures
- BS-EN-ISO-10211-TC - Tracked Changes. Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations
- BS-EN-ISO-10456 - Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values
- BS-EN-ISO-12241 - Thermal insulation for building equipment and industrial installations. Calculation rules
- BS-EN-ISO-12567-1 - Thermal performance of windows and doors. Determination of thermal transmittance by the hot-box method
- BS-EN-ISO-12567-2 - Thermal performance of windows and doors. Determination of thermal transmittance by hot box method
- BS-EN-ISO-12569 - Thermal performance of buildings and materials. Determination of specific airflow rate in buildings. Tracer gas dilution method
- BS-EN-ISO-12569-TC - Tracked Changes. Thermal performance of buildings and materials. Determination of specific airflow rate in buildings. Tracer gas dilution method
- BS-EN-ISO-12631 - Thermal performance of curtain walling. Calculation of thermal transmittance
- BS-EN-ISO-12631-TC - Tracked Changes. Thermal performance of curtain walling. Calculation of thermal transmittance
- BS-EN-ISO-13370 - Thermal performance of buildings. Heat transfer via the ground. Calculation methods
- BS-EN-ISO-13786 - Thermal performance of building components. Dynamic thermal characteristics. Calculation methods
- BS-EN-ISO-13788 - Hygrothermal performance of building components and building elements. Internal surface temperature to avoid critical surface humidity and interstitial condensation. Calculation methods
- BS-EN-ISO-13789 - Thermal performance of buildings. Transmission and ventilation heat transfer coefficients. Calculation method
- BS-EN-ISO-13789-TC - Tracked Changes. Thermal performance of buildings. Transmission and ventilation heat transfer coefficients. Calculation method
- BS-EN-ISO-13790 - Energy performance of buildings. Calculation of energy use for space heating and cooling
- BS-EN-ISO-13791 - Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. General criteria and validation procedures
- BS-EN-ISO-13792 - Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. Simplified methods
- BS-EN-ISO-13793 - Thermal performance of buildings. Thermal design of foundations to avoid frost heave
- BS-EN-ISO-14683 - Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
- BS-EN-ISO-14683-TC - Tracked Changes. Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
- BS-EN-ISO-15758 - Hygrothermal performance of building equipment and industrial installations. Calculation of water vapour diffusion. Cold pipe insulation systems
- BS-EN-ISO-15927-2 - Hygrothermal performance of buildings. Calculation and presentation of climatic data
- BS-EN-ISO-15927-3 - Hygrothermal performance of buildings. Calculation and presentation of climatic data
- BS-EN-ISO-15927-4 - Hygrothermal performance of buildings. Calculation and presentation of climatic data
- BS-EN-ISO-15927-5 - Hygrothermal performance of buildings. Calculation and presentation of climatic data
- BS-EN-ISO-15927-6 - Hygrothermal performance of buildings. Calculation and presentation of climatic data
- BS-EN-ISO-18393-1 - Thermal insulation products. Determination of settlement
- BS-EN-ISO-23993 - Thermal insulation products for building equipment and industrial installations. Determination of design thermal conductivity
- BS-EN-ISO-52000-1 - Energy performance of buildings. Overarching EPB assessment
- BS-EN-ISO-52003-1 - Energy performance of buildings. Indicators, requirements, ratings and certificates
- BS-EN-ISO-52010-1 - Energy performance of buildings. External climatic conditions
- BS-EN-ISO-52016-1 - Energy performance of buildings. Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads
- BS-EN-ISO-52016-3 - Energy performance of buildings. Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads
- BS-EN-ISO-52017-1 - Energy performance of buildings. Sensible and latent heat loads and internal temperatures
- BS-EN-ISO-52018-1 - Energy performance of buildings. Indicators for partial EPB requirements related to thermal energy balance and fabric features
- BS-EN-ISO-52022-1 - Energy performance of buildings. Thermal, solar and daylight properties of building components and elements
- BS-EN-ISO-52022-3 - Energy performance of buildings. Thermal, solar and daylight properties of building components and elements
- BS-EN-ISO-52120-1 - Energy performance of buildings. Contribution of building automation, controls and building management
- BS-EN-ISO-52120-1-TC - Tracked Changes. Energy performance of buildings. Contribution of building automation, controls and building management
- BS-EN-ISO-52127-1 - Energy performance of buildings. Building management system
- BS-EN-ISO-6781-1 - Performance of buildings. Detection of heat, air and moisture irregularities in buildings by infrared methods
- BS-EN-ISO-6781-1-TC - Tracked Changes. Performance of buildings. Detection of heat, air and moisture irregularities in buildings by infrared methods
- BS-EN-ISO-6781-3 - Performance of buildings. Detection of heat, air and moisture irregularities in buildings by infrared methods
- BS-EN-ISO-6946 - Building components and building elements. Thermal resistance and thermal transmittance. Calculation methods
- BS-EN-ISO-6946-TC - Tracked Changes. Building components and building elements. Thermal resistance and thermal transmittance. Calculation methods
- BS-EN-ISO-9346 - Hygrothermal performance of buildings and building materials. Physical quantities for mass transfer. Vocabulary
- BS-EN-ISO-9972 - Thermal performance of buildings. Determination of air permeability of buildings. Fan pressurization method
- BS-ISO-12575-1 - Thermal insulation. Exterior insulating systems for foundations
- BS-ISO-12575-2 - Thermal insulation products. Exterior insulating systems for foundations
- BS-ISO-12655 - Energy performance of buildings. Presentation of measured energy use of buildings
- BS-ISO-14857 - Thermal performance in the built environment. Determination of air permeance of building materials
- BS-ISO-16343 - Energy performance of buildings. Methods for expressing energy performance and for energy certification of buildings
- BS-ISO-16346 - Energy performance of buildings. Assessment of overall energy performance
- BS-ISO-16956 - Thermal performance in the built environment. Determination of air flow rate in building applications by field measuring methods
- BS-ISO-17772-1 - Energy performance of buildings. Indoor environmental quality
- BS-ISO-18292 - Energy performance of fenestration systems for residential buildings. Calculation procedure
- BS-ISO-18523-1 - Energy performance of buildings. Schedule and condition of building, zone and space usage for energy calculation
- BS-ISO-18523-2 - Energy performance of buildings. Schedule and condition of building, zone and space usage for energy calculation
- BS-ISO-19467 - Thermal performance of windows and doors. Determination of solar heat gain coefficient using solar simulator
- BS-ISO-19467-2 - Thermal Performance of windows and doors. Determination of solar heat gain coefficient using solar simulator
- BS-ISO-21105-1 - Performance of buildings. Building enclosure thermal performance verification and commissioning
- BS-ISO-21773 - Methods of test and characterization of performance for energy recovery components
- BS-ISO-24144 - Thermal insulation. Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range. Differential scanning calorimetry (DSC) method
- BS-ISO-52000-3 - Energy performance of buildings. Overarching EPB assessment
- BS-ISO-52032-1 - Energy performance of buildings. Energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems
- BS-ISO-9869-1 - Thermal insulation. Building elements. 7IIn-situ7R measurement of thermal resistance and thermal transmittance
- BS-ISO-9869-2 - Thermal insulation. Building elements. In-situ measurement of thermal resistance and thermal transmittance
- BS-ISO-9869-3 - Thermal insulation of building elements. In-situ measurement of thermal resistance and thermal transmittance
- PAS-2030 - Installation of energy efficiency measures in existing dwellings. Specification
- PAS-2030 ONLINE 10 L - Improving the energy efficiency of existing buildings. Specification for installation process, process management and service provision
- PAS-2030 ONLINE 3 LI - Improving the energy efficiency of existing buildings. Specification for installation process, process management and service provision
- PAS-2030 ONLINE 5 LI - Improving the energy efficiency of existing buildings. Specification for installation process, process management and service provision
- PAS-2030 ONLINE SING - Improving the energy efficiency of existing buildings. Specification for installation process, process management and service provision
- PAS-2031 - Certification of energy efficiency measure installation in existing buildings and insulation in residential park homes
- PAS-2035 - Retrofitting dwellings for improved energy efficiency. Specification and guidance
- PAS-2035/2030 - Retrofitting dwellings for improved energy efficiency. Specification and guidance
- PAS-2035/2030-ONLINE - Retrofitting dwellings for improved energy efficiency. Specification and guidance.
- PAS-2038 - Retrofitting non-domestic buildings for improved energy efficiency. Specification
- PD-CEN-12831-2 - Energy performance of buildings. Method for calculation of the design heat load
- PD-CEN-12831-4 - Energy performance of buildings. Method for calculation of the design heat load
- PD-CEN-14613 - Thermal performance of building materials and components. Principles for the determination of thermal properties of moist materials andcomponent s
- PD-CEN-15131 - Thermal performance of building materials. The use of interpolating equations in relation to thermal measurement on thick specimens. Guarded hot plate and heat flow meter apparatus
- PD-CEN-15193-2 - Energy performance of buildings. Energy requirements for lighting
- PD-CEN-15232-2 - Energy performance of buildings
- PD-CEN-15316-6-10 - Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies
- PD-CEN-15316-6-2 - Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies
- PD-CEN-15316-6-3 - Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies
- PD-CEN-15316-6-4 - Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies
- PD-CEN-15316-6-5 - Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies
- PD-CEN-15316-6-6 - Energy performance of buildings. Method for calculation of system energy performance and system efficiencies
- PD-CEN-15316-6-7 - Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies
- PD-CEN-15316-6-8 - Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies
- PD-CEN-15316-6-9 - Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies
- PD-CEN-15378-2 - Energy performance of buildings. Heating systems and DHW in buildings
- PD-CEN-15378-4 - Energy performance of buildings. Heating systems and DHW in buildings
- PD-CEN-15459-2 - Energy performance of buildings. Economic evaluation procedure for energy systems in buildings
- PD-CEN-15601 - Hygrothermal performance of buildings. Resistance to wind-driven rain of roof coverings with discontinuously laid small elements. Test methods
- PD-CEN-16798-10 - Energy performance of buildings. Ventilation for buildings
- PD-CEN-16798-16 - Energy performance of buildings. Ventilation for buildings
- PD-CEN-16798-18 - Energy performance of buildings. Ventilation for buildings
- PD-CEN-16798-2 - Energy performance of buildings. Ventilation for buildings
- PD-CEN-16798-4 - Energy performance of buildings. Ventilation for buildings
- PD-CEN-16798-6 - Energy performance of buildings. Ventilation for buildings
- PD-CEN-16798-8 - Energy performance of buildings. Ventilation for buildings
- PD-CEN-16947-2 - Building Management System
- PD-CEN-ISO-52000-2 - Energy performance of buildings. Overarching EPB assessment
- PD-CEN-ISO-52003-2 - Energy performance of buildings. Indicators, requirements, ratings and certificates
- PD-CEN-ISO-52016-2 - Energy performance of buildings. Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads
- PD-CEN-ISO-52018-2 - Energy performance of buildings. Indicators for partial EPB requirements related to thermal energy balance and fabric features
- PD-CEN-ISO-52019-2 - Energy performance of buildings. Hygrothermal performance of building components and building elements
- PD-CEN-ISO-52022-2 - Energy performance of buildings. Thermal, solar and daylight properties of building components and elements
- PD-CEN-ISO-52120-2 - Energy performance of buildings. Contribution of building automation, controls and building management
- PD-CEN-ISO-52120-2-TC - Tracked Changes. Energy performance of buildings. Contribution of building automation, controls and building management
- PD-CEN-ISO-52127-2 - Energy performance of buildings. Building automation, controls and building management
- PD-ISO-16344 - Energy performance of buildings. Common terms, definitions and symbols for the overall energy performance rating and certification
ISO:
- ISO-10077-1 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
- ISO-10077-2 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames
- ISO-10211 - Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- ISO-10211-1 - Thermal bridges in building construction - Heat flows and surface temperatures - Part 1: General calculation methods - Corrigendum
- ISO-10211-2 - Thermal bridges in building construction -- Calculation of heat flows and surface temperatures -- Part 2: Linear thermal bridges
- ISO-10456 - Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values
- ISO-12241 - Thermal insulation for building equipment and industrial installations - Calculation rules
- ISO-12567-1 - Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors
- ISO-12567-2 - Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows
- ISO-12569 - Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method
- ISO-12572 - Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method
- ISO-12572-AM1 - - Amendment 1: Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1
- ISO-12574-2 - Thermal insulation - Cellulose-fibre loose-fill for horizontal applications in ventilated roof spaces - Part 2: Principal responsibilities of installers
- ISO-12575-1 - Thermal insulation products - Exterior insulating systems for foundations - Part 1: Material specification
- ISO-12575-2 - Thermal insulation products - Exterior insulating systems for foundations - Part 2: Principal responsibilities of installers
- ISO-12631 - Thermal performance of curtain walling - Calculation of thermal transmittance
- ISO-12655 - Energy performance of buildings - Presentation of measured energy use of buildings
- ISO-13370 - Thermal performance of buildings - Heat transfer via the ground - Calculation methods
- ISO-13786 - Thermal performance of building components - Dynamic thermal characteristics - Calculation methods
- ISO-13788 - Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods
- ISO-13789 - Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method
- ISO-13790 - Energy performance of buildings - Calculation of energy use for space heating and cooling
- ISO-13791 - Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures
- ISO-13792 - Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods
- ISO-13793 - Thermal performamce of buildings - Thermal design of foundations to avoid frost heave
- ISO-14438 - Glass in building - Determination of energy balance value - Calculation method
- ISO-14683 - Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values
- ISO-14857 - Thermal performance in the built environment - Determination of air permeance of building materials
- ISO-15099 - Thermal performance of windows, doors and shading devices - Detailed calculations
- ISO-15758 - Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems
- ISO-15927-1 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly means of single meteorological elements
- ISO-15927-2 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 2: Hourly data for design cooling load
- ISO-15927-3 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
- ISO-15927-4 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling
- ISO-15927-5 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating
- ISO-15927-5-AM1 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating - Amendment 1
- ISO-15927-6 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 6: Accumulated temperature differences (degree-days)
- ISO-16343 - Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings
- ISO-16344 - Energy performance of buildings - Common terms, definitions and symbols for the overall energy performance rating and certification
- ISO-16346 - Energy performance of buildings - Assessment of overall energy performance
- ISO-16956 - Thermal performance in the built environment - Determination of air flow rate in building applications by field measuring methods
- ISO-17772-1 - Energy performance of buildings - Indoor environmental quality - Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings
- ISO-17772-2 - Energy performance of buildings - Overall energy performance assessment procedures - Part 2: Guideline for using indoor environmental input parameters for the design and assessment of energy performance of buildings
- ISO-18292 - Energy performance of fenestration systems for residential buildings - Calculation procedure
- ISO-18393-1 - Thermal insulation products - Determination of settlement - Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling
- ISO-18523-1 - Energy performance of buildings - Schedule and condition of building, zone and space usage for energy calculation - Part 1: Non-residential buildings
- ISO-18523-2 - Energy performance of buildings - Schedule and condition of building, zone and space usage for energy calculation - Part 2: Residential buildings
- ISO-19467 - Thermal performance of windows and doors - Determination of solar heat gain coefficient using solar simulator
- ISO-19467-2 - Thermal Performance of windows and doors - Determination of solar heat gain coefficient using solar simulator - Part 2: Centre of glazing
- ISO-21105-1 - Performance of buildings - Building enclosure thermal performance verification and commissioning - Part 1: General requirements
- ISO-21129 - Hygrothermal performance of building materials and products - Determination of water-vapour transmission properties - Box method
- ISO-21773 - Methods of test and characterization of performance for energy recovery components
- ISO-22097 - Thermal insulation for buildings - Reflective insulation products - Determination of thermal performance
- ISO-23993 - Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity
- ISO-24144 - Thermal insulation - Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range - Differential scanning calorimetry (DSC) method
- ISO-52000-1 - Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures
- ISO-52000-2 - Energy performance of buildings - Overarching EPB assessment - Part 2: Explanation and justification of ISO 52000-1
- ISO-52000-3 - Energy performance of buildings - Overarching EPB assessment - Part 3: General principles for determination and reporting of primary energy factors (PEF) and CO2 emission coefficients
- ISO-52003-1 - Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 1: General aspects and application to the overall energy performance
- ISO-52003-2 - Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 2: Explanation and justification of ISO 52003-1
- ISO-52010-1 - Energy performance of buildings - External climatic conditions - Part 1: Conversion of climatic data for energy calculations
- ISO-52010-2 - Energy performance of buildings - External climatic conditions - Part 2: Explanation and justification of ISO 52010-1
- ISO-52016-1 - Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures
- ISO-52016-2 - Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 2: Explanation and justification of ISO 52016-1 and ISO 52017-1
- ISO-52016-3 - Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 3: Calculation procedures regarding adaptive building envelope elements
- ISO-52017-1 - Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures
- ISO-52018-1 - Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options
- ISO-52018-2 - Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 2: Explanation and justification of ISO 52018-1
- ISO-52019-2 - Energy performance of buildings - Hygrothermal performance of building components and building elements - Part 2: Explanation and justification
- ISO-52022-1 - Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing
- ISO-52022-2 - Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification
- ISO-52022-3 - Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing
- ISO-52032-1 - Energy performance of buildings - Energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems - Part 1: Calculation procedures
- ISO-52120-1 - Energy performance of buildings - Contribution of building automation, controls and building management - Part 1: General framework and procedures
- ISO-52120-2 - Energy performance of buildings - Contribution of building automation, controls and building management - Part 2: Explanation and justification of ISO 52120-1
- ISO-52127-1 - Energy performance of buildings - Building management system - Part 1: Module M10-12
- ISO-52127-2 - Energy performance of buildings - Building automation, controls and building management - Part 2: Explanation and justification of ISO 52127-1
- ISO-6242-1 - Building construction -- Expression of users requirements -- Part 1: Thermal requirements'
- ISO-6781 - Thermal insulation -- Qualitative detection of thermal irregularities in building envelopes -- Infrared method
- ISO-6781-1 - Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 1: General procedures
- ISO-6781-3 - Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 3: Qualifications of equipment operators, data analysts and report writers
- ISO-6946 - Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods
- ISO-6946-AM1 - Building components and building elements - Thermal resistance and thermal transmittance - Calculation methodAmendment 1
- ISO-7615-1 - Energy performance of building systems - Underfloor air distribution systems - Part 1: General overview
- ISO-9869 - Thermal insulation -- Building elements -- In-situ measurement of thermal resistance and thermal transmittance
- ISO-9869-1 - Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance - Part 1: Heat flow meter method
- ISO-9869-2 - Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance - Part 2: Infrared method for frame structure dwelling
- ISO-9869-2-AM1 - - Amendment 1: Example of calculation of uncertainty analysis
- ISO-9869-3 - Thermal insulation of building elements - In-situ measurement of thermal resistance and thermal transmittance - Part 3: Probe insertion method
- ISO-9972 - Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method
- ISO-9972/AM 1 - Thermal insulation - Determination of building airtightness - Fan pressurization method - Amendment 1
- ISO/IEC-30134-7 - Information technology - Data centres key performance indicators - Part 7: Cooling efficiency ratio (CER)
Other SDOs:
- DIN-EN-13363-1 - Part 1: Simplified Method, Solar Protection Devices Combined With Glazing - Calculatio
- DIN-EN-13363-2 - Part 2: Detailed Calculation Method, Solar Protection Devices Combined With Glazing, C
- DIN-EN-13947 - Thermal performance of curtain walling - Calculation of thermal transmittance; German version EN 13947:2006
- DIN-EN-14114 - Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems; German version EN 14114:2002
- DIN-EN-14496 - Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods; German version EN 14496:2017
- DIN-EN-ISO-12567-2 - Part 2: Roof Windows & Other Projecting Windows, Thermal Performance of Windows & Door
- DIN-EN-ISO-13791 - Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012)
- DIN-EN-ISO-13792 - Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2012)
- DIN-EN-ISO-15927-4 - Part 4: Hourly Data for Assessing the Annual Energy Use for Heating & Cooling, Hygrot
- DIN-EN-ISO-15927-5 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004 + Amd 1:2011)
- DIN-EN-ISO-6946 - Building Components & Building Elements - Thermal Resistance & Thermal Transmittance -
- EA-0055 - Classification of energy services providers
- EN-13363-1 - Part 1: Simplified Method, Solar Protection Devices Combined With Glazing, Calculation
- EN-13363-2 - Part 2: Detailed Calculation Method, Solar Protection Devices Combined With Glazing, C
- EN-13947 - Thermal Performance of Curtain Walling - Calculation of Thermal Transmittance
- EN-14114 - Hygrothermal Performance of Building Equipment & Industrialinstallations, Calculation
- EN-14496 - Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
- EN-14933 - Thermal Insulation & Light Weight Fill Products for Civil Engineering Applications - F
- EN-14934 - Thermal Insulation & Light Weight Fill Products for Civil Engineering Applications - F
- EN-15026 - Hygrothermal Performance of Building Components & Building Elements, Assessment of Moi
- EN-15193-1 - Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9
- EN-15232 - Energy Performance of Buildings - Energy performance of buildings - Part 1: Impact of Building Automation, Controls and Building Management - Modules M10-4,5,6,7,8,9,10
- EN-15232-1 - Energy Performance of Buildings - Energy performance of buildings - Part 1: Impact of Building Automation, Controls and Building Management - Modules M10-4,5,6,7,8,9,10
- EN-15255 - Energy Performance of Buildings - Sensible Room Cooling Load Calculation - General CRI
- EN-15265 - Energy Performance of Buildings, Calculation of Energy Needs for Space Heating & Cooli
- EN-15900 - Energy Efficiency Services - Definitions & Requirements
- EN-16783 - Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
- EN-16798-1 - Energy performance of buildings - Ventilation for buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6
- EN-16798-17 - Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11)
- EN-16798-5-1 - Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation
- EN-16798-5-2 - Energy performance of buildings - Ventilation for buildings - Part 5-2: Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 2: Distribution and generation
- EN-16798-7 - Energy performance of buildings - Ventilation for buildings - Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5)
- EN-16883 - Conservation of cultural heritage - Guidelines for improving the energy performance of historic buildings
- EN-16947-1 - Energy Performance of Buildings - Building Management System - Part 1: Module M10-12
- EN-1745 - Masonry and masonry products - Methods for determining thermal properties
- EN-ISO-10077-1 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
- EN-ISO-10077-2 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames
- EN-ISO-10211 - Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
- EN-ISO-10211-2 - Part 2: Linear Thermal Bridges, Thermal Bridges in Buildingconstruction - Calculation
- EN-ISO-10456 - Building Materials & Products - Hygrothermal Properties - Tabulated Design Values & Pr
- EN-ISO-12241 - Thermal Insulating for Building Equipment & Industrial Installations, Calculation Rule
- EN-ISO-12567-1 - Part 1: Complete Windows & Doors, Thermal Performance of Windows & Doors - Determinati
- EN-ISO-12567-2 - Part 2: Roof Windows & Other Projecting Windows, Thermal Performance of Windows & Door
- EN-ISO-12569 - Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method
- EN-ISO-12572 - Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method
- EN-ISO-12631 - Thermal performance of curtain walling - Calculation of thermal transmittance
- EN-ISO-13370 - Thermal performance of buildings - Heat transfer via the ground - Calculation methods
- EN-ISO-13786 - Thermal performance of building components - Dynamic thermal characteristics - Calculation methods
- EN-ISO-13789 - Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method
- EN-ISO-13791 - Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures
- EN-ISO-13792 - Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods
- EN-ISO-14683 - Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values
- EN-ISO-15758 - Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems
- EN-ISO-15927-2 - Hygrothermal Performance of Buildings, Calculation & Presentation of Climatic Data, Ho
- EN-ISO-15927-3 - Part 3: Calculation of a Driving Rain Index for Vertical Surfaces From Hourly Wind & R
- EN-ISO-15927-4 - Part 4: Hourly Data for Assessing the Annual Energy Use for Heating & Cooling, Hygrot
- EN-ISO-15927-5 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004)
- EN-ISO-15927-6 - Hygrothermal Performance of Buildings, Calculation & Presentation of Climatic Data, Ac
- EN-ISO-23993 - Thermal Insulation Products for Building Equipment & Industrial Installations - Determ
- EN-ISO-52003-1 - Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 1: General aspects and application to the overall energy performance
- EN-ISO-52010-1 - Energy performance of buildings - External climatic conditions - Part 1: Conversion of climatic data for energy calculations
- EN-ISO-52016-1 - Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures
- EN-ISO-52017-1 - Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures
- EN-ISO-52018-1 - Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options
- EN-ISO-52022-1 - Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing
- EN-ISO-52022-3 - Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing
- EN-ISO-6781-3 - Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 3: Qualifications of equipment operators, data analysts and report writers
- EN-ISO-6946 - Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods
- EN-ISO-9346 - Hygrothermal Performance of Buildings & Building Materials, Physical Quantities for M
- EN-ISO-9972 - Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method
- JIS-A-1480 - Thermal insulating materials and products for buildings -- Procedures for determining declared and design thermal values
- JIS-A-2101 - Building components and building elements -- Thermal resistance and thermal transmittance -- Calculation method
- JIS-A-2201 - Test method for performance of building airtightness by fan pressurization
- JIS-A-4710 - Windows and doorsets -- Thermal resistance test
- JIS-A-6930 - Plastic films vapour barrier for residential use
- JIS-A-9501 - Standard practice for thermal insulation works
- JIS-A-9511/A1 - Preformed cellular plastics thermal insulation materials (Amendment 1)
- SIS-CEN-ISO/TR-52000-2 - Energy performance of buildings - Overarching EPB assessment - Part 2: Explanation and justification of ISO 52000-1 (ISO/TR 52000-2:2017)
- SIS-CEN-ISO/TR-52003-2 - Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 2: Explanation and justification of ISO 52003-1 (ISO/TR 52003-2:2017)
- SIS-CEN-ISO/TR-52010-2 - Energy performance of buildings - External climatic conditions - Part 2: Explanation and justification of ISO 52010-1 (ISO/TR 52010-2:2017)
- SIS-CEN-ISO/TR-52016-2 - Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 2: Explanation and justification of ISO 52016-1 and ISO 52017-1 (ISO/TR 52016-2:2017)
- SIS-CEN-ISO/TR-52018-2 - Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 2: Explanation and justification of ISO 52018-1 (ISO/TR 52018-2:2017)
- SIS-CEN-ISO/TR-52019-2 - Energy performance of buildings - Hygrothermal performance of building components and building elements - Part 2: Explanation and justification (ISO/TR 52019-2:2017)
- SIS-CEN-ISO/TR-52022-2 - Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification (ISO/TR 52022-2:2017)
- SIS-CEN-ISO/TR-52127-2 - Energy performance of buildings - Building automation, controls and building management - Part 2: Explanation and justification of ISO 52127-1 (ISO/TR 52127-2:2021)
- SIS-CEN/TR-12831-2 - Energy performance of buildings - Method for calculation of the design heat load - Part 2: Explanation and justification of EN 12831-1, Module M3-3
- SIS-CEN/TR-12831-4 - Energy performance of buildings - Method for calculation of the design heat load - Part 4: Explanation and justification of EN 12831-3, Module M8-2, M8-3
- SIS-CEN/TR-15193-2 - Energy performance of buildings - Energy requirements for lighting - Part 2: Explanation and justification of EN 15193-1, Module M9
- SIS-CEN/TR-15316-6-1 - Energy performance of buildings- Method for calculation of system energy requirements and system efficiencies - Part 6-1: Explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4
- SIS-CEN/TR-15316-6-10 - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-10: Explanation and justification of EN 15316-5, Module M3-7, M8-7
- SIS-CEN/TR-15316-6-2 - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-2: Explanation and justification of EN 15316-2, Module M3-5, M4-5
- SIS-CEN/TR-15316-6-3 - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-3: Explanation and justification of 15316-3, Module M3-6, M4-6, M8-6
- SIS-CEN/TR-15316-6-4 - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-4: Explanation and justification of EN 15316-4-1, Module M3-8-1, M8-8-1
- SIS-CEN/TR-15316-6-5 - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-5: Explanation and justification of EN 15316-4-2, Module M3-8
- SIS-CEN/TR-15316-6-6 - Energy performance of buildings - Method for calculation of system energy performance and system efficiencies - Part 6-6: Explanation and justification of EN 15316-4-3, Module M3-8-3, M8-8-3
- SIS-CEN/TR-15316-6-7 - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-7: Explanation and justification of EN 15316-4-4, Module M8-3-4, M8-8-4, M8-11-4
- SIS-CEN/TR-15316-6-8 - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-8: Explanation and justification of EN 15316-4-5 (District heating and cooling), Module M3-8-5, M4-8-5, M8-8-5, M11-8-5
- SIS-CEN/TR-15316-6-9 - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-9: Explanation and justification of EN 15316-4-8, Module M3-8-8
- SIS-CEN/TR-15378-2 - Energy performance of buildings - Heating systems and DHW in buildings - Part 2: Explanation and justification of EN 15378-1, Module M3-11 and M8-11
- SIS-CEN/TR-15378-4 - Energy performance of buildings - Heating systems and DHW in buildings - Part 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10
- SIS-CEN/TR-15459-2 - Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 2: Explanation and justification of EN 15459-1, Module M1-14
- SIS-CEN/TR-15601 - Hygrothermal performance of buildings - Resistance to wind driven rain of roof coverings with discontinuously laid small elements - Test methods
- SIS-CEN/TR-16798-14 - Energy performance of buildings - Ventilation for buildings - Part 14: Interpretation of the requirements in EN 16798-13 - Calculation of cooling systems (Module M4-8) - Generation
- SIS-CEN/TR-16798-2 - Energy performance of buildings - Ventilation for buildings - Part 2: Interpretation of the requirements in EN 16798-1 - Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (Module M1-6)
- SIS-CEN/TR-16798-4 - Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4)
- SS-21550 - Thermal insulation - Porous insulation materials - Determination of permeability
- SS-21551 - Buildings - Determination of airtightness
- SS-24201 - Thermal insulation - Physical quantities - Terminology
- SS-24210 - Thermal insulation - Thermography of buildings
- SS-24211 - Thermal insulation - Determination of thermal resistance or thermalconductivity by means of a heat-flow meter
- SS-24212 - Thermal insulation - Determination of thermal resistance by means of a hot box
- SS-24213 - Thermal insulation - Doors and windows - Determination of thermal resistance by means of a hot box
- SS-24214 - Thermal insulation - Building elements - Determination of thermal resistance
- SS-EN-12085 - Thermal insulating products for building applications - Determination of linear dimensions of test specimens
- SS-EN-12086 - Thermal insulating products for building applications - Determination of water vapour transmission properties
- SS-EN-12087 - Thermal insulating products for building applications - Determination of long term water absorption by immersion
- SS-EN-12087-AM1 - Thermal insulating products for building applications - Determination of long term water absorption by immersion
- SS-EN-12088 - Thermal insulating products for building applications - Determination of long term water absorption by diffusion
- SS-EN-12089 - Thermal insulating products for building applications - Determination of bending behaviour
- SS-EN-12090 - Thermal insulating products for building applications - Determination of shear behaviour
- SS-EN-12091 - Thermal insulating products for building applications - Determination of freeze-thaw resistance
- SS-EN-12429 - Thermal insulation for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
- SS-EN-12430 - Thermal insulating products for building applications - Determination of behaviour under point load
- SS-EN-12430-AM1 - Thermal insulating products for building applications - Determination of behaviour under point load
- SS-EN-12431 - Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
- SS-EN-12431-AM1 - Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
- SS-EN-12524 - Building materials and products - Hygrothermal properties - Tabulated design values
- SS-EN-12664 - Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
- SS-EN-12667 - Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
- SS-EN-13172 - Thermal insulation products - Evaluation of conformity
- SS-EN-13187 - Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method
- SS-EN-13363-1 - Solar protection devices combined with glazing - Calculation of solar and light transmittance - Part 1: Simplified method
- SS-EN-13363-2 - Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method
- SS-EN-13400 - Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
- SS-EN-13445 - Unfired pressure vessels
- SS-EN-13829 - Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:1996, modified)
- SS-EN-13947 - Thermal performance of curtain walling - Calculation of thermal transmittance
- SS-EN-14114 - Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems
- SS-EN-14496 - Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
- SS-EN-15193-1 - Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9
- SS-EN-15232 - Energy performance of buildings - Impact of Building Automation, Controls and Building Management
- SS-EN-15232-1 - Energy performance of buildings - Part 1: Impact of Building Automation, Controls and Building Management - Modules M10-4,5,6,7,8,9,10
- SS-EN-15255 - Energy performance of buildings - Sensible room cooling load calculation - General criteria and validation procedures
- SS-EN-15900 - Energy efficiency services - Definitions and requirements
- SS-EN-1602 - Thermal insulating products for building applications - Determination of the apparent density
- SS-EN-1603 - Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity)
- SS-EN-1603-AM1 - Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 oC/50 % relative humidity)
- SS-EN-1604 - Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
- SS-EN-1604-AM1 - Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
- SS-EN-1605 - Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
- SS-EN-1605-AM1 - Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
- SS-EN-1606 - Thermal insulating products for building applications - Determination of compressive creep
- SS-EN-1606-AM1 - Thermal insulating products for building applications - Determination of compressive creep
- SS-EN-1607 - Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
- SS-EN-1608 - Thermal insulating products for building applications - Determination of tensile strength parallel to faces
- SS-EN-1609 - Thermal insulating products for building applications - Determination of short term water absorption by partial immersion
- SS-EN-1609-AM1 - Thermal insulating products for building applications - Determination of dimensional short term water absorption by partial immersion
- SS-EN-16247-2 - Energy audits - Part 2: Buildings
- SS-EN-16783 - Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations
- SS-EN-16798-1 - Energy performance of buildings - Ventilation for buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6
- SS-EN-16798-13 - Energy performance of buildings - Ventilation for buildings - Part 13: Calculation of cooling systems (Module M4-8) - Generation
- SS-EN-16798-15 - Energy performance of buildings - Ventilation for buildings - Part 15: Calculation of cooling systems (Module M4-7) - Storage
- SS-EN-16798-17 - Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11)
- SS-EN-16798-3 - Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4)
- SS-EN-16798-5-1 - Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation
- SS-EN-16798-5-2 - Energy performance of buildings Modules M5-6, M5-8 Ventilation for buildings Calculation methods for energy requirements of ventilation systems Part 5-2: Distribution and generation (revision of EN 15241) - method 2
- SS-EN-16798-7 - Energy performance of buildings - Ventilation for buildings - Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5)
- SS-EN-16798-9 - Energy performance of buildings - Ventilation for buildings - Part 9: Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9) - General
- SS-EN-16883 - Conservation of cultural heritage - Guidelines for improving the energy performance of historic buildings
- SS-EN-16947-1 - Energy Performance of Buildings - Building Management System - Part 1: Module M10-12
- SS-EN-17423 - Energy performance of buildings - Determination and reporting of Primary Energy Factors (PEF) and CO2 emission coefficient - General Principles, Module M1-7
- SS-EN-1745 - Masonry and masonry products - Methods for determining thermal properties
- SS-EN-1934 - Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry
- SS-EN-1946-1 - Thermal performance of building and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria
- SS-EN-1946-2 - Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by guarded hot plate method
- SS-EN-1946-3 - Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method
- SS-EN-1946-4 - Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods
- SS-EN-1998-1 - Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
- SS-EN-3475-603 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking
- SS-EN-822 - Thermal insulating products for building applications - Determination of length and width
- SS-EN-823 - Thermal insulating products for building applications - Determination of thickness
- SS-EN-824 - Thermal insulating products for building applications - Determination of squareness
- SS-EN-825 - Thermal insulating products for building applications - Determination of flatness
- SS-EN-826 - Thermal insulating products for building applications - Determination of compression behaviour
- SS-EN-ISO-10077-1 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017)
- SS-EN-ISO-10077-2 - Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017)
- SS-EN-ISO-10211 - Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017)
- SS-EN-ISO-10211-1 - Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 1: General methods (ISO 10211-1:1995/Cor 1:2002)
- SS-EN-ISO-10211-2 - Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2: Linear thermal bridges (ISO 10211-2:2001)
- SS-EN-ISO-10456 - Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007)
- SS-EN-ISO-12241 - Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2022)
- SS-EN-ISO-12567-1 - Thermal performance of windows and doors - Determination of thermal transmittance by hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010)
- SS-EN-ISO-12567-2 - Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows (ISO 12567-2:2005)
- SS-EN-ISO-12569 - Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017)
- SS-EN-ISO-12572 - Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016, IDT)
- SS-EN-ISO-12631 - Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017)
- SS-EN-ISO-13370 - Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2017)
- SS-EN-ISO-13786 - Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2017)
- SS-EN-ISO-13788 - Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012)
- SS-EN-ISO-13789 - Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method (ISO 13789:2017)
- SS-EN-ISO-13790 - Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008)
- SS-EN-ISO-13791 - Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012)
- SS-EN-ISO-13792 - Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2012)
- SS-EN-ISO-13793 - Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001)
- SS-EN-ISO-14683 - Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:2017)
- SS-EN-ISO-15758 - Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems (ISO 15758:2014)
- SS-EN-ISO-15927-1 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly means of single meteorological elements (ISO 15927-1:2003)
- SS-EN-ISO-15927-2 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 2: Hourly data for design cooling load (ISO 15927-2:2009)
- SS-EN-ISO-15927-3 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data (ISO 15927-3:2009)
- SS-EN-ISO-15927-4 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO 15927-4:2005 )
- SS-EN-ISO-15927-5 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004)
- SS-EN-ISO-15927-5-AM1 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating - Amendment 1 (ISO 15927-5:2004/Amd 1:2011)
- SS-EN-ISO-15927-6 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 6: Accumulated temperature differences (degree- days) (ISO 15927-6:2007)
- SS-EN-ISO-16535 - Thermal insulating products for building applications - Determination of long-term water absorption by immersion (ISO 16535:2019)
- SS-EN-ISO-16536 - Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019)
- SS-EN-ISO-22097 - Thermal insulation for buildings - Reflective insulation products - Determination of thermal performance (ISO 22097:2023)
- SS-EN-ISO-23993 - Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity (ISO 23993:2008, Corrected version 2009-10-01)
- SS-EN-ISO-29465 - Thermal insulating products for building applications - Determination of length and width (ISO 29465:2022)
- SS-EN-ISO-29466 - Thermal insulating products for building applications - Determination of thickness (ISO 29466:2022)
- SS-EN-ISO-29468 - Thermal insulating products for building applications - Determination of flatness (ISO 29468:2022)
- SS-EN-ISO-29469 - Thermal insulating products for building applications - Determination of compression behaviour (ISO 29469:2022)
- SS-EN-ISO-29766 - Thermal insulating products for building applications - Determination of tensile strength parallel to faces (ISO 29766:2022)
- SS-EN-ISO-29767 - Thermal insulating products for building applications - Determination of short-term water absorption by partial immersion (ISO 29767:2019)
- SS-EN-ISO-29768 - Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO 29768:2022)
- SS-EN-ISO-29770 - Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products (ISO 29770:2022)
- SS-EN-ISO-4230 - Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)
- SS-EN-ISO-52000-1 - Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017)
- SS-EN-ISO-52003-1 - Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 1: General aspects and application to the overall energy performance (ISO 52003-1:2017)
- SS-EN-ISO-52010-1 - Energy performance of buildings - External climatic conditions - Part 1: Conversion of climatic data for energy calculations (ISO 52010-1:2017)
- SS-EN-ISO-52016-1 - Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures (ISO 52016-1:2017)
- SS-EN-ISO-52016-3 - Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 3: Calculation procedures regarding adaptive building envelope elements (ISO 52016-3:2023)
- SS-EN-ISO-52017-1 - Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures (ISO 52017-1:2017)
- SS-EN-ISO-52018-1 - Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO 52018-1:2017)
- SS-EN-ISO-52022-1 - Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-1:2017)
- SS-EN-ISO-52022-3 - Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-3:2017)
- SS-EN-ISO-52120-1 - Energy performance of buildings - Contribution of building automation, controls and building management - Part 1: General framework and procedures (ISO 52120-1:2021)
- SS-EN-ISO-6781-1 - Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 1: General procedures (ISO 6781-1:2023)
- SS-EN-ISO-6781-3 - Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 3: Qualifications of equipment operators, data analysts and report writers (ISO 6781-3:2015)
- SS-EN-ISO-6946 - Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017)
- SS-EN-ISO-6946-AM1 - Building components and building elements - Thermal resistance and thermal transmittance - Calculation method (ISO 6946:1996/A1:2003)
- SS-EN-ISO-7345 - Thermal performance of buildings and building components - Physical quantities and definitions (ISO 7345:2018)
- SS-EN-ISO-9229 - Thermal insulation - Vocabulary (ISO 9229:2020)
- SS-EN-ISO-9288 - Thermal insulation - Heat transfer by radiation - Vocabulary (ISO 9288:2022)
- SS-EN-ISO-9972 - Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:2015)
- SS-ISO-17572-3 - Intelligent transport systems (ITS) - Location referencing for geographic databases - Part 3: Dynamic location references (dynamic profile) (ISO 17572-3:2008, IDT)
- SS-ISO-188 - Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests (ISO 188:2023, IDT)
- SS-ISO-2781 - Rubber, vulcanized or thermoplastic - Determination of density (ISO 2781:2018, IDT)
- UNE-92181 - Minimum advisable characteristics for different applications. Thermal insulation products for buildings. Factory made expanded polystyrene products (EPS).
- UNE-92316 - Measurement and quantification criteria for thermal insulating works in cavity walls for buildings
- UNE-92325 - Thermal insulation products and glass enclosures for buildings. Installation control.
- UNE-EA-0055 - Clasification of energy services providers