Document Center List of Standards on Paints And Varnishes Including Coating Powders, Paint Coatings And Protective Paint Systems
ICS Code 87.040
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C1520 - Standard Guide for Paintability of Latex Sealants
- ASTM-D1006 - Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
- ASTM-D1014 - Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
- ASTM-D1063 - Test Method for Ash in Rosin (Withdrawn 1991)
- ASTM-D1150 - Single and Multi-Panel Forms for Recording Results of Exposure Tests of Paints
- ASTM-D1186 - Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006)
- ASTM-D1187 - Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
- ASTM-D1200 - Standard Test Method for Viscosity by Ford Viscosity Cup
- ASTM-D1209 - Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
- ASTM-D1211 - Standard Test Method for Temperature-Change Resistance of Clear Nitrocellulose Lacquer Films Applied to Wood (Withdrawn 2006)
- ASTM-D1308 - Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Coating Systems
- ASTM-D1309 - Standard Test Method for Settling Properties of Traffic Paints During Storage (Withdrawn 2020)
- ASTM-D1400 - Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006)
- ASTM-D1475 - Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
- ASTM-D1535 - Standard Practice for Specifying Color by the Munsell System
- ASTM-D154 - Standard Guide for Testing Varnishes (Withdrawn 2018)
- ASTM-D1540 - Method of Test for Effect of Staining Agents on Organic Finishes Used in the Transportation Industry (Withdrawn 1992)
- ASTM-D1546 - Standard Practice for Testing the Performance of Clear Floor Sealers (Withdrawn 2008)
- ASTM-D16 - Standard Terminology for Paint, Related Coatings, Materials, and Applications
- ASTM-D1641 - Standard Practice for Conducting Outdoor Exposure Tests of Varnishes (Withdrawn 2013)
- ASTM-D1642 - Standard Test Methods for Elasticity or Toughness of Varnishes (Withdrawn 1999)
- ASTM-D1643 - Test Method for Gas Checking and Draft Test of Varnish Films (Withdrawn 1993)
- ASTM-D1644 - Standard Test Methods for Nonvolatile Content of Varnishes
- ASTM-D1647 - Standard Test Methods for Resistance of Dried Films of Varnishes to Water and Alkali (Withdrawn 2004)
- ASTM-D1654 - Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
- ASTM-D1736 - Test Method for Efflorescence of Interior Wall Paints (Withdrawn 1997)
- ASTM-D1737 - Method of Test for Elongation of Attached Organic Coatings with Cylindrical Mandrel Apparatus (Withdrawn 1987)
- ASTM-D1848 - Standard Classification for Reporting Paint Film Failures Characteristic of Exterior Latex Paints (Withdrawn 2003)
- ASTM-D1849 - Standard Test Method for Package Stability of Paint
- ASTM-D2064 - Standard Test Method for Print Resistance of Architectural Paints
- ASTM-D2090 - Standard Test Method for Clarity and Cleanness of Paint and Ink Liquids (Withdrawn 2007)
- ASTM-D2091 - Standard Test Method for Print Resistance of Lacquers
- ASTM-D215 - Standard Practice for the Chemical Analysis of White Linseed Oil Paints (Withdrawn 2005)
- ASTM-D2198 - Standard Test Method for Stain Removal From Multicolor Lacquers (Withdrawn 2003)
- ASTM-D2199 - Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers
- ASTM-D2201 - Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
- ASTM-D2205 - Standard Guide for Selection of Tests for Traffic Paints
- ASTM-D2243 - Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
- ASTM-D2245 - Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints (Withdrawn 2016)
- ASTM-D2246 - Standard Method of Testing Finishes on Primed Metallic Substrates for Humidity-Thermal Cycle Cracking (Withdrawn 1992)
- ASTM-D2247 - Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
- ASTM-D2248 - Standard Practice for Detergent Resistance of Organic Finishes
- ASTM-D2336 - Standard Guide for Specifying Factory Applied Wood Coatings (Withdrawn 2008)
- ASTM-D2337 - Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers (Withdrawn 2019)
- ASTM-D2338 - Standard Test Method for Determining Particle Size of Multicolor Lacquers (Withdrawn 2020)
- ASTM-D2348 - Standard Test Method for Arsenic in Paint (Withdrawn 2009)
- ASTM-D2353 - Method of Test for Flow Ratings of Organic Coatings Using the Shell Flow Comparator (Withdrawn 1990)
- ASTM-D2369 - Standard Test Method for Volatile Content of Coatings
- ASTM-D2485 - Standard Test Methods for Evaluating Coatings For High Temperature Service
- ASTM-D2486 - Standard Test Methods for Scrub Resistance of Wall Paints
- ASTM-D2571 - Standard Guide for Testing Wood Furniture Lacquers (Withdrawn 2003)
- ASTM-D2574 - Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
- ASTM-D2620 - Standard Test Method for Light Stability of Clear Coatings (Withdrawn 2001)
- ASTM-D2691 - Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products (Withdrawn 1992)
- ASTM-D2697 - Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
- ASTM-D2792 - Standard Practice for Solvent and Fuel Resistance of Traffic Paint
- ASTM-D2794 - Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
- ASTM-D2805 - Standard Test Method for Hiding Power of Paints by Reflectometry
- ASTM-D2832 - Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
- ASTM-D3008 - Test Method for Resin Acids in Rosin by Gas Chromatography (Withdrawn 1997)
- ASTM-D3023 - Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
- ASTM-D3129 - Guide for Testing Exterior Latex House Paints (Withdrawn 1996)
- ASTM-D3133 - Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry (Withdrawn 2008)
- ASTM-D3134 - Standard Practice for Establishing Color and Gloss Tolerances
- ASTM-D3168 - Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
- ASTM-D3170 - Standard Test Method for Chipping Resistance of Coatings
- ASTM-D3258 - Standard Test Method for Porosity of White or Near White Paint Films by Staining
- ASTM-D3259 - Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle (Withdrawn 2009)
- ASTM-D3273 - Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
- ASTM-D3274 - Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
- ASTM-D3278 - Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
- ASTM-D3312 - Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
- ASTM-D3322 - Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
- ASTM-D333 - Standard Guide for Clear and Pigmented Lacquers
- ASTM-D3335 - Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
- ASTM-D3358 - Guide for Testing Water-Borne Floor Paints (Withdrawn 1994)
- ASTM-D3361 - Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
- ASTM-D3363 - Standard Test Method for Film Hardness by Pencil Test
- ASTM-D344 - Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts (Withdrawn 2018)
- ASTM-D3450 - Standard Test Method for Washability Properties of Interior Architectural Coatings
- ASTM-D3451 - Standard Guide for Testing Coating Powders and Powder Coatings
- ASTM-D3456 - Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
- ASTM-D3459 - Standard Test Method for Humid-Dry Cycling for Coatings on Wood and Wood Products (Withdrawn 2007)
- ASTM-D3618 - Standard Test Method for Detection of Lead in Paint and Dried Paint Films
- ASTM-D3623 - Standard Test Method for Testing Antifouling Panels in Shallow Submergence
- ASTM-D3624 - Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
- ASTM-D3630 - Standard Guide for Determining Constituents Classified as Hazardous Contained in Protective Coatings (Withdrawn 2001)
- ASTM-D3717 - Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
- ASTM-D3718 - Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
- ASTM-D3719 - Standard Test Method for Quantifying Dirt Collection on Coated Exterior Panels (Withdrawn 2009)
- ASTM-D3730 - Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
- ASTM-D3732 - Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM-D3792 - Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
- ASTM-D3793 - Standard Test Method for Low-Temperature Coalescence of Latex Paint Films by Porosity Measurement (Withdrawn 2012)
- ASTM-D3794 - Standard Guide for Testing Coil Coatings
- ASTM-D3806 - Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
- ASTM-D3891 - Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
- ASTM-D3911 - Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
- ASTM-D3912 - Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
- ASTM-D3924 - Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
- ASTM-D3925 - Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
- ASTM-D3927 - Guide for State and Institutional Purchasing of Paint (Withdrawn 1991)
- ASTM-D3928 - Standard Test Method for Evaluation of Gloss or Sheen Uniformity
- ASTM-D3934 - Standard Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus
- ASTM-D3941 - Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
- ASTM-D3960 - Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
- ASTM-D3964 - Standard Practice for Selection of Coating Specimens for Appearance Measurements
- ASTM-D3980 - Practice for Interlaboratoy Testing of Paint and Related Materials (Withdrawn 1998)
- ASTM-D4017 - Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
- ASTM-D4039 - Standard Test Method for Reflection Haze of High-Gloss Surfaces
- ASTM-D4061 - Standard Test Method for Retroreflectance of Horizontal Coatings
- ASTM-D4062 - Standard Test Method for Leveling of Paints by Draw-Down Method
- ASTM-D4082 - Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants
- ASTM-D4086 - Standard Practice for Visual Evaluation of Metamerism
- ASTM-D4138 - Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
- ASTM-D4141 - Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
- ASTM-D4144 - Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing (Withdrawn 2019)
- ASTM-D4145 - Standard Test Method for Coating Flexibility of Prepainted Sheet
- ASTM-D4146 - Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
- ASTM-D4147 - Standard Practice for Applying Coil Coatings Using Wire-Wound Drawdown Bars
- ASTM-D4207 - Test Method for Sustained Burning of Low-Viscosity Mixtures by the Wick Test (Withdrawn 1998)
- ASTM-D4213 - Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
- ASTM-D4214 - Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
- ASTM-D4287 - Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
- ASTM-D4302 - Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints
- ASTM-D4359 - Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
- ASTM-D4366 - Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
- ASTM-D4400 - Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
- ASTM-D4414 - Standard Practice for Measurement of Wet Film Thickness by Notch Gages
- ASTM-D4449 - Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
- ASTM-D4457 - Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph (Withdrawn 2019)
- ASTM-D4540 - Guide for Testing Interior Latex Semigloss and Glass Paints (Withdrawn 1996)
- ASTM-D4541 - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
- ASTM-D4585 - Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
- ASTM-D4587 - Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- ASTM-D4610 - Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings
- ASTM-D4707 - Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
- ASTM-D4712 - Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014)
- ASTM-D4752 - Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
- ASTM-D4834 - Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
- ASTM-D4838 - Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints (Withdrawn 2023)
- ASTM-D4946 - Standard Test Method for Blocking Resistance of Architectural Paints
- ASTM-D4958 - Standard Test Method for Comparison of the Brush Drag of Latex Paints
- ASTM-D4960 - Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials
- ASTM-D5007 - Standard Test Method for Wet-to-Dry Hiding Change
- ASTM-D5031 - Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
- ASTM-D5067 - Standard Specification for Artists' Watercolor Paints
- ASTM-D5087 - Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
- ASTM-D5098 - Standard Specification for Artists' Acrylic Dispersion Paints
- ASTM-D5108 - Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water (Withdrawn 2016)
- ASTM-D5125 - Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
- ASTM-D5145 - Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
- ASTM-D5146 - Standard Guide to Testing Solvent-Borne Architectural Coatings
- ASTM-D5150 - Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
- ASTM-D5200 - Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans
- ASTM-D5201 - Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
- ASTM-D5286 - Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
- ASTM-D5325 - Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints
- ASTM-D5326 - Standard Test Method for Color Development in Tinted Latex Paints
- ASTM-D5367 - Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted
- ASTM-D5588 - Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
- ASTM-D5589 - Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement
- ASTM-D5590 - Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
- ASTM-D56 - Standard Test Method for Flash Point by Tag Closed Cup Tester
- ASTM-D5618 - Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear (Withdrawn 2020)
- ASTM-D562 - Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
- ASTM-D5682 - Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials
- ASTM-D5724 - Standard Specification for Gouache Paints
- ASTM-D5894 - Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
- ASTM-D5962 - Standard Guide for Maintaining Unqualified Coatings (Paints) Within Level I Areas of a Nuclear Power Facility (Withdrawn 2008)
- ASTM-D5965 - Standard Test Methods for Density of Coating Powders
- ASTM-D6133 - Standard Test Method for Acetone,
p -Chlorobenzotrifluoride, Methyl Acetate ort -Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph - ASTM-D6165 - Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials (Withdrawn 2016)
- ASTM-D6166 - Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)
- ASTM-D6441 - Standard Test Methods for Measuring the Hiding Power of Powder Coatings
- ASTM-D6442 - Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
- ASTM-D6486 - Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
- ASTM-D6489 - Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
- ASTM-D6490 - Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
- ASTM-D6583 - Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
- ASTM-D659 - Method of Evaluating Degree of Chalking of Exterior Paints (Withdrawn 1989)
- ASTM-D660 - Standard Test Method for Evaluating Degree of Checking of Exterior Paints
- ASTM-D6606 - Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer (Withdrawn 2022)
- ASTM-D661 - Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
- ASTM-D662 - Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
- ASTM-D6632 - Standard Test Method for Total Copper in Antifouling Paints (Withdrawn 2010)
- ASTM-D6669 - Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
- ASTM-D6695 - Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
- ASTM-D6736 - Standard Test Method for Burnish Resistance of Latex Paints
- ASTM-D6762 - Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
- ASTM-D6803 - Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Architectural Coatings Using Small-Scale Environmental Chambers
- ASTM-D6900 - Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
- ASTM-D6944 - Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
- ASTM-D6990 - Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems
- ASTM-D7072 - Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
- ASTM-D711 - Standard Test Method for No-Pick-Up Time of Traffic Paint
- ASTM-D713 - Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
- ASTM-D714 - Standard Test Method for Evaluating Degree of Blistering of Paints
- ASTM-D7187 - Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
- ASTM-D7190 - Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
- ASTM-D7232 - Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
- ASTM-D7245 - Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
- ASTM-D7270 - Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings
- ASTM-D7306 - Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation
- ASTM-D7334 - Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
- ASTM-D7358 - Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
- ASTM-D7395 - Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
- ASTM-D7488 - Standard Test Method for Open Time of Latex Paints
- ASTM-D7489 - Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
- ASTM-D7490 - Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
- ASTM-D7539 - Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
- ASTM-D7588 - Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container
- ASTM-D772 - Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
- ASTM-D7733 - Standard Specification for Acrylic Dispersion Ground
- ASTM-D7734 - Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method
- ASTM-D7768 - Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
- ASTM-D7787 - Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings
- ASTM-D7836 - Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
- ASTM-D7855 - Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
- ASTM-D7867 - Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
- ASTM-D7868 - Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings
- ASTM-D7894 - Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems
- ASTM-D7895 - Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems
- ASTM-D8008 - Standard Practice for Representative Field Sampling of Traffic Paints
- ASTM-D8090 - Standard Test Method for Particle Size Distribution of Paints and Pigments Using Dynamic Imaging Methods
- ASTM-D8157 - Standard Guide for Qualification Testing of Coatings Used in Coating Service Level I in Nuclear Power Plants
- ASTM-D822 - Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
- ASTM-D823 - Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
- ASTM-D868 - Standard Practice for Determination of Degree of Bleeding of Traffic Paint
- ASTM-D869 - Standard Test Method for Evaluating Degree of Settling of Paint
- ASTM-D913 - Standard Practice for Evaluating Degree of Traffic Marking Line Wear
- ASTM-D969 - Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint (Withdrawn 2010)
- ASTM-E1135 - Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
- ASTM-E1610 - Standard Guide for Forensic Paint Analysis and Comparison
- ASTM-E1645 - Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
- ASTM-E1651 - Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry (Withdrawn 2004)
- ASTM-E1729 - Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
- ASTM-E1753 - Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
- ASTM-E1795 - Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
- ASTM-E1796 - Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
- ASTM-E1797 - Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
- ASTM-E1828 - Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint (Withdrawn 2010)
- ASTM-E2255 - Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
- ASTM-E2458 - Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
- ASTM-E28 - Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
- ASTM-E2808 - Standard Guide for Microspectrophotometry in Forensic Paint Analysis
- ASTM-E2809 - Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
- ASTM-E2924 - Standard Practice for Intumescent Coatings
- ASTM-E2937 - Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
- ASTM-ES28 - Practice for the Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques (Withdrawn 1995)
- ASTM-ES37 - Practice for Preparation of Dried Paint Samples for Subsequent Lead Analysis by Atomic Spetroscopy (Withdrawn 1995)
- ASTM-F1130 - Standard Practice for Inspecting the Coating System of a Ship
- ASTM-F1131 - Practice for Inspecting the Coating System of a Ship's Tanks and Voids (Withdrawn 1993)
- ASTM-F1132 - Practice for Inspecting the Coating System of a Ship's Deck and Deck Machinery (Withdrawn 1993)
- ASTM-F1133 - Practice for Inspecting the Coating System of a Ship's Underwater Hull and Boottop During Drydocking (Withdrawn 1993)
- ASTM-F1428 - Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
- ASTM-F2853 - Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
- ASTM-F3019 - Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners
- ASTM-F3078 - Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
- ASTM-F66 - Test Methods for Testing Photoresists Used in Microelectronic Fabrication (Withdrawn 1996)
- ASTM-G10 - Standard Test Method for Specific Bendability of Pipeline Coatings
- ASTM-G11 - Standard Practice for Effects of Outdoor Weathering on Pipeline Coatings
- ASTM-G12 - Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013)
- ASTM-G13 - Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)
- ASTM-G14 - Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
- ASTM-G17 - Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
- ASTM-G19 - Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial (Withdrawn 2010)
- ASTM-G20 - Standard Test Method for Chemical Resistance of Pipeline Coatings
- ASTM-G89 - Methods for Cathodic Disbonding of Pipeline Coatings Subjected to Cyclic Temperatures (Withdrawn 1992)
BSI:
- BS-1070 - Specification for black paint (tar-based)
- BS-2015 - Glossary of paint and related terms
- BS-2523 - Specification for lead-based priming paints
- BS-3279 - Specification for seedlac
- BS-3698 - Specification for calcium plumbate priming paints
- BS-3900-0 - Methods of test for paints
- BS-3900-A10 - Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating
- BS-3900-A11 - Methods of test for paints. Tests on liquid paints (excluding chemical tests)
- BS-3900-A12 - Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of density
- BS-3900-A14 - Methods of test for paints
- BS-3900-A17 - Methods of test for paints. Tests on liquid paints (excluding chemical tests). Coating of test panels at a specified spreading rate
- BS-3900-A3 - Methods of test for paints
- BS-3900-A5 - Methods of test for paints
- BS-3900-A7-2 - Methods of Test for Paints, Tests on Liquid Paints (Excluding Chemical Tests), Determi
- BS-3900-B10 - Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of hexavalent chromium content of solid matter
- BS-3900-B11 - Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total chromium content of liquid matter
- BS-3900-B12 - Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' mercury content
- BS-3900-B15 - Methods of test for paints
- BS-3900-B16 - Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total mercury
- BS-3900-B3 - Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' lead in the solid matter in liquid paints: method for use in conjunction with The Control of Lead at Work Regulations, 1980 (S.I. 1980 No. 1248)
- BS-3900-B4 - Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total lead in paints and similar materials
- BS-3900-B5 - Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Preparation of acid extracts from liquid paints or coating powders
- BS-3900-B6 - Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' lead content
- BS-3900-B7 - Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' antimony content
- BS-3900-B8 - Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' barium content
- BS-3900-B9 - Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' cadmium content
- BS-3900-C1 - Methods of test for paints. Tests associated with paint film formation
- BS-3900-C6 - Methods of test for paints. Tests associated with paint film formation. Determination of fineness of grind
- BS-3900-C9 - Methods of test for paints. Tests associated with paint film formation. Methods for evaluation of the compatibility of a product with a surface to be painted
- BS-3900-D13 - Determination of Reflection Haze on Paint Films at 20Deg. C
- BS-3900-D5 - Methods of test for paints. Optical tests on paint films. Measurement of specular gloss of non-metallic paint films at 20-¦, 60-¦ and 85-¦
- BS-3900-D8 - Methods of test for paints. Optical tests on paint films
- BS-3900-E12.1 - Methods of test for paints
- BS-3900-E12.2 - Methods of test for paints
- BS-3900-E19 - Methods of test for paints
- BS-3900-E3 - Methods of test for paints. Impact (falling weight) resistance
- BS-3900-E7 - Methods of test for paints
- BS-3900-E8 - Methods of test for paints
- BS-3900-F10 - Methods of test for paints
- BS-3900-F11 - Methods of test for paint. Durability tests on paint films
- BS-3900-F18 - Determination of Resistance To Corrosion Under a Wet (Salt Fog)/Dry/Humidity Cycle
- BS-3900-F19 - Group F: Durability Tests on Paint Films - Determination Ofresistance To Cyclic Corro
- BS-3900-F2 - Methods of test for paint. Durability tests on paint films
- BS-3900-F4 - Methods of test for paints
- BS-3900-F5 - Methods of test for paints
- BS-3900-G6 - Methods of test for paints
- BS-3900-G7 - Methods of test for paints. Environmental tests on paint films (including tests for resistance to corrosion and chemicals). Determination of the effect of heat
- BS-3900-H1 - Methods of test for paints. Evaluation of paint and varnish defects. Designation of intensity, quantity and size of common types of defect: general principles and rating schemes
- BS-3900-H2 - Methods of test for paints. Evaluation of paint and varnish defects. Designation of degree of blistering
- BS-3900-H3 - Methods of test for paints. Evaluation of paint and varnish defects. Designation of degree of rusting
- BS-3900-H5 - Methods of test for paints. Evaluation of paint and varnish defects. Designation of degree of flaking
- BS-3900-J11 - Methods of Test for Paints, Testing of Coating Powders, Determination of Flow of Coati
- BS-3900-J13 - Testing of Coating Powders - Particle Size Analysis by Laserdiffraction
- BS-3900-K2 - Paints and varnishes. Determination of release rate of biocides from antifouling paints. Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract
- BS-3996 - Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels)
- BS-4479-4 - Design of articles that are to be coated
- BS-4652 - Specification for zinc-rich priming paint (organic media)
- BS-4756 - Specification for ready-mixed aluminium priming paints for woodwork
- BS-4764 - Specification for powder cement paints
- BS-4800 - Schedule of paint colours for building purposes
- BS-4800/BS-5252 KIT - Schedule of paint colours for building purposes
- BS-4800F - BS 4800 Colour matching fan
- BS-5044 - Specification for contrast aid paints used in magnetic particle flaw detection
- BS-7664 - Specification for undercoat and finishing paints
- BS-7719 - Specification for water-borne emulsion paints for interior use
- BS-7897-1 - Specification for Lac & Shellac, Hand-Made Shellac
- BS-7897-2 - Specification for Lac & Shellac, Machine-Made Shellac
- BS-7897-3 - Specification for lac and shellac. Bleached lac
- BS-7956 - Specification for primers for woodwork
- BS-EN-1062-3 - Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete
- BS-EN-1062-6 - Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete
- BS-EN-12206-1 - Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes
- BS-EN-13300 - Paints and varnishes. Paints and varnishes for interior walls and ceilings. Classification
- BS-EN-15060 - Paints and varnishes. Guide for the classification and selection of coating systems for wood based materials in furniture for interior use
- BS-EN-15457 - Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi
- BS-EN-15457-TC - Tracked Changes. Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi
- BS-EN-15458 - Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against algae
- BS-EN-15458-TC - Tracked Changes. Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against algae
- BS-EN-16105 - Paints and varnishes. Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water
- BS-EN-16402 - Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing
- BS-EN-16492 - Paints and varnishes. Evaluation of the surface disfigurement caused by fungi and algae on coatings
- BS-EN-16623 - Paints and varnishes. Reactive coatings for fire protection of metallic substrates. Definitions, requirements, characteristics and marking
- BS-EN-16980-1 - Photocatalysis. Continuous flow test methods
- BS-EN-16980-1-TC - Tracked Changes. Photocatalysis. Continuous flow test methods
- BS-EN-24624 - Paints and varnishes. Pull-off test
- BS-EN-456 - Method for determination of flashpoint of paints, varnishes and related products by the rapid equilibrium method
- BS-EN-605 - Paints and varnishes. Standard panels for testing
- BS-EN-71-7 - Safety of toys
- BS-EN-927-1 - Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-927-10 - Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-927-11-TC - Tracked Changes. Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-927-13 - Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-927-14 - Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-927-2 - Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-927-3 - Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-927-4 - Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of the water-vapour permeability
- BS-EN-927-5 - Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-927-5-TC - Tracked Changes. Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-927-6 - Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-927-6-TC - Tracked Changes. Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-927-7 - Paints and varnishes. Coating materials and coating systems for exterior wood
- BS-EN-971-1 - Paints and varnishes. Terms and definitions for coating materials
- BS-EN-ISO-11341 - Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation
- BS-EN-ISO-11507 - Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water
- BS-EN-ISO-11890-1 - Paints and varnishes. Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content
- BS-EN-ISO-11890-1-TC - Tracked Changes. Paints and varnishes. Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content
- BS-EN-ISO-11890-2 - Paints and varnishes. Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content
- BS-EN-ISO-11997-1 - Paints and varnishes. Determination of resistance to cyclic corrosion conditions
- BS-EN-ISO-11997-2 - Paints and varnishes. Determination of resistance to cyclic corrosion conditions
- BS-EN-ISO-11997-3 - Paints and varnishes. Determination of resistance to cyclic corrosion conditions
- BS-EN-ISO-11998 - Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings
- BS-EN-ISO-12137 - Paints and varnishes. Determination of mar resistance
- BS-EN-ISO-12137-1 - Paints & Varnishes, Determination of Mar Resistance, Method Using a Curved Stylus
- BS-EN-ISO-12137-2 - Paints and varnishes. Determination of mar resistance. Method using a pointed stylus
- BS-EN-ISO-12944-9 - Paints and varnishes. Corrosion protection of steel structures by protective paint systems
- BS-EN-ISO-13076 - Paints and varnishes. Lighting and procedure for visual assessments of coatings
- BS-EN-ISO-13129 - Paints and varnishes. Electrochemical measurement of the protection provided to steel by paint coatings. Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
- BS-EN-ISO-13803 - Paints and varnishes. Determination of haze on paint films at 20 degrees
- BS-EN-ISO-15091 - Paints and varnishes. Determination of electrical conductivity and resistance
- BS-EN-ISO-15110 - Paints and varnishes. Artificial weathering including acidic deposition
- BS-EN-ISO-1513 - Paints and varnishes. Examination and preparation of test samples
- BS-EN-ISO-1514 - Paints and varnishes. Standard panels for testing
- BS-EN-ISO-1514-TC - Tracked Changes. Paints and varnishes. Standard panels for testing
- BS-EN-ISO-1516 - Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method
- BS-EN-ISO-1518 - Paints and varnishes. Scratch test
- BS-EN-ISO-1518-1 - Paints and varnishes. Determination of scratch resistance
- BS-EN-ISO-15181-1 - Paints and varnishes. Determination of release rate of biocides from antifouling paints
- BS-EN-ISO-15181-2 - Paints and varnishes. Determination of release rate of biocides from antifouling paints
- BS-EN-ISO-15181-3 - Paints and varnishes. Determination of release rate of biocides from antifouling paints
- BS-EN-ISO-15181-4 - Paints and varnishes. Determination of release rate of biocides from antifouling paints
- BS-EN-ISO-15181-5 - Paints and varnishes. Determination of release rate of biocides from antifouling paints
- BS-EN-ISO-15181-6 - Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of tralopyril release rate by quantitation of its degradation product in the extract
- BS-EN-ISO-1518-1-TC - Tracked Changes. Paints and varnishes. Determination of scratch resistance
- BS-EN-ISO-1518-2 - Paints and varnishes. Determination of scratch resistance
- BS-EN-ISO-15184 - Paints and varnishes. Determination of film hardness by pencil test
- BS-EN-ISO-1520 - Paints and varnishes. Cupping test
- BS-EN-ISO-1522 - Paints and varnishes. Pendulum damping test
- BS-EN-ISO-1523 - Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method
- BS-EN-ISO-1524 - Paints, varnishes and printing inks. Determination of fineness of grind
- BS-EN-ISO-15528 - Paints, varnishes and raw materials for paints and varnishes. Sampling
- BS-EN-ISO-15710 - Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution
- BS-EN-ISO-15711 - Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water
- BS-EN-ISO-16474-1 - Paints and varnishes. Methods of exposure to laboratory light sources
- BS-EN-ISO-16474-2 - Paints and varnishes. Methods of exposure to laboratory light sources
- BS-EN-ISO-16474-3 - Paints and varnishes. Methods of exposure to laboratory light sources
- BS-EN-ISO-16482-1 - Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersions. Oven method
- BS-EN-ISO-16482-2 - Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersions. Microwave method
- BS-EN-ISO-16773-1 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens
- BS-EN-ISO-16773-2 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens
- BS-EN-ISO-16773-3 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens
- BS-EN-ISO-16773-4 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens
- BS-EN-ISO-16805 - Binders for paints and varnishes. Determination of glass transition temperature
- BS-EN-ISO-16862 - Paints and varnishes. Evaluation of sag resistance
- BS-EN-ISO-16925 - Paints and varnishes. Determination of the resistance of coatings to pressure water-jetting
- BS-EN-ISO-16925-TC - Tracked Changes. Paints and varnishes. Determination of the resistance of coatings to pressure water-jetting
- BS-EN-ISO-16927 - Paints and varnishes. Determination of the overcoatability and recoatability of a coating
- BS-EN-ISO-17132 - Paints and varnishes. T-bend test
- BS-EN-ISO-17463 - Paints and varnishes. Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
- BS-EN-ISO-17463-TC - Tracked Changes. Paints and varnishes. Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
- BS-EN-ISO-17652-2 - Welding. Test for shop primers in relation to welding and allied processes
- BS-EN-ISO-17872 - Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
- BS-EN-ISO-17895 - Paints and varnishes. Determination of volatile organic compound (VOC). Gas-chromatographic method with headspace injection for VOC determination
- BS-EN-ISO-17895-TC - Tracked Changes. Paints and varnishes. Determination of volatile organic compound (VOC). Gas-chromatographic method with headspace injection for VOC determination
- BS-EN-ISO-19396-1 - Paints and varnishes. Determination of pH value
- BS-EN-ISO-19399 - Paints and varnishes. Wedge-cut method for determination of film thickness (scribe and drill method)
- BS-EN-ISO-19403-1 - Paints and varnishes. Wettability
- BS-EN-ISO-19403-1-TC - Tracked Changes. Paints and varnishes. Wettability
- BS-EN-ISO-19403-2 - Paints and varnishes. Wettability
- BS-EN-ISO-19403-3 - Paints and varnishes. Wettability
- BS-EN-ISO-19403-4 - Paints and varnishes. Wettability
- BS-EN-ISO-19403-5 - Paints and varnishes. Wettability
- BS-EN-ISO-19403-6 - Paints and varnishes. Wettability
- BS-EN-ISO-19403-7 - Paints and varnishes. Wettability
- BS-EN-ISO-20266 - Paints and varnishes. Determination of image clarity (degree of sharpness of reflected or transmitted image)
- BS-EN-ISO-20566 - Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
- BS-EN-ISO-20567-1 - Paints and varnishes. Determination of stone-chip resistance of coatings
- BS-EN-ISO-20567-1-TC - Tracked Changes. Paints and varnishes. Determination of stone-chip resistance of coatings
- BS-EN-ISO-20567-2 - Paints and varnishes. Determination of stone-chip resistance of coatings
- BS-EN-ISO-20567-2-TC - Tracked Changes. Paints and varnishes. Determination of stone-chip resistance of coatings
- BS-EN-ISO-20567-3 - Paints and varnishes. Determination of stone-chip resistance of coatings
- BS-EN-ISO-20567-4 - Paints and varnishes. Determination of stone-chip resistance of coatings
- BS-EN-ISO-21227-2 - Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging
- BS-EN-ISO-21227-3 - Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging
- BS-EN-ISO-21227-4 - Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging
- BS-EN-ISO-21546 - Paints and varnishes. Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
- BS-EN-ISO-22516 - Paints and varnishes. Practical determination of nonvolatile and volatile matter content during application
- BS-EN-ISO-22518 - Paints and varnishes. Determination of solvents in water-thinnable coating materials. Gas-chromatographic method
- BS-EN-ISO-22553-1 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-10 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-11 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-12 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-13 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-14 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-15 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-16 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-2 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-3 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-4 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-5 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-6 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-7 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-8 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22553-9 - Paints and varnishes. Electro-deposition coatings
- BS-EN-ISO-22557 - Paints and varnishes. Scratch test using a spring-loaded pen
- BS-EN-ISO-22969 - Paints and varnishes. Determination of solar reflectance
- BS-EN-ISO-22970 - Paints and varnishes. Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage
- BS-EN-ISO-23168 - Paints and varnishes. Determination of water content. Gas-chromatographic method
- BS-EN-ISO-23321 - Solvents for paints and varnishes. Demineralized water for industrial applications. Specification and test methods
- BS-EN-ISO-23322 - Paints and varnishes. Determination of solvents in coating materials containing organic solvents only. Gas-chromatographic method
- BS-EN-ISO-23811 - Paints and varnishes. Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
- BS-EN-ISO-2409 - Paints and varnishes. Cross-cut test
- BS-EN-ISO-2409-TC - Tracked Changes. Paints and varnishes. Cross-cut test
- BS-EN-ISO-2431 - Paints and varnishes. Determination of flow time by use of flow cups
- BS-EN-ISO-2808 - Paints and varnishes. Determination of film thickness
- BS-EN-ISO-2808-TC - Tracked Changes. Paints and varnishes. Determination of film thickness
- BS-EN-ISO-2811-1 - Paints and varnishes. Determination of density
- BS-EN-ISO-2811-1-TC - Tracked Changes. Paints and varnishes. Determination of density
- BS-EN-ISO-2811-2 - Paints and varnishes. Determination of density
- BS-EN-ISO-2811-3 - Paints and varnishes. Determination of density
- BS-EN-ISO-2811-3-TC - Tracked Changes. Paints and varnishes. Determination of density.Oscillation method.
- BS-EN-ISO-2811-4 - Paints and varnishes. Determination of density
- BS-EN-ISO-2812-1 - Paints and varnishes. Determination of resistance to liquids
- BS-EN-ISO-2812-1-TC - Tracked Changes. Paints and varnishes. Determination of resistance to liquids
- BS-EN-ISO-2812-2 - Paints and varnishes. Determination of resistance to liquids
- BS-EN-ISO-2812-2-TC - Tracked Changes. Paints and varnishes. Determination of resistance to liquids
- BS-EN-ISO-2812-3 - Paints and varnishes. Determination of resistance to liquids
- BS-EN-ISO-2812-4 - Paints and varnishes. Determination of resistance to liquids
- BS-EN-ISO-2812-4-TC - Tracked Changes. Paints and varnishes. Determination of resistance to liquids
- BS-EN-ISO-2812-5 - Paints and varnishes. Determination of resistance to liquids
- BS-EN-ISO-2812-5-TC - Tracked Changes. Paints and varnishes. Determination of resistance to liquids
- BS-EN-ISO-2813 - Paints and varnishes. Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
- BS-EN-ISO-2814 - Paints and varnishes. Comparison of contrast ratio (hiding power) of paints of the same type and colour
- BS-EN-ISO-2815 - Paints and varnishes. Buchholz indentation test
- BS-EN-ISO-28199-1 - Paints and varnishes. Evaluation of properties of coating systems related to the spray application process
- BS-EN-ISO-28199-2 - Paints and varnishes. Evaluation of properties of coating systems related to the spray application process
- BS-EN-ISO-28199-2-TC - Tracked Changes. Paints and varnishes. Evaluation of properties of coating systems related to the spray application process
- BS-EN-ISO-28199-3 - Paints and varnishes. Evaluation of properties of coating systems related to the spray application process
- BS-EN-ISO-28199-3-TC - Tracked Changes. Paints and varnishes. Evaluation of properties of coating systems related to the spray application process
- BS-EN-ISO-2884-1 - Paints and varnishes. Determination of viscosity using rotary viscometers
- BS-EN-ISO-2884-2 - Paints and varnishes. Determination of viscosity using rotational viscometers
- BS-EN-ISO-2884-2-TC - Tracked Changes. Paints and varnishes. Determination of viscosity using rotational viscometers
- BS-EN-ISO-3233-1 - Paints and varnishes. Determination of percentage volume of non-volatile matter
- BS-EN-ISO-3233-2 - Paints and varnishes. Determination of the percentage volume of non-volatile matter
- BS-EN-ISO-3233-3 - Paints and varnishes. Determination of the percentage volume of non-volatile matter
- BS-EN-ISO-3233-3-TC - Tracked Changes. Paints and varnishes. Determination of the percentage volume of non-volatile matter
- BS-EN-ISO-3248 - Paints and varnishes. Determination of the effect of heat
- BS-EN-ISO-3248-TC - Tracked Changes. Paints and varnishes. Determination of the effect of heat
- BS-EN-ISO-3251 - Paints, varnishes and plastics. Determination of non-volatile-matter content
- BS-EN-ISO-3668 - Paints and varnishes. Visual comparison of colour of paints
- BS-EN-ISO-3678 - Paints and varnishes. Print-free test
- BS-EN-ISO-3679 - Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
- BS-EN-ISO-3679-TC - Tracked Changes. Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
- BS-EN-ISO-3680 - Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method
- BS-EN-ISO-4618 - Paints and varnishes. Terms and definitions
- BS-EN-ISO-4618-TC - Tracked Changes. Paints and varnishes. Vocabulary
- BS-EN-ISO-4623-1 - Paints and varnishes. Determination of resistance to filiform corrosion
- BS-EN-ISO-4623-1-TC - Tracked Changes. Paints and varnishes. Determination of resistance to filiform corrosion
- BS-EN-ISO-4623-2 - Paints and varnishes. Determination of resistance to filiform corrosion
- BS-EN-ISO-4623-2-TC - Tracked Changes. Paints and varnishes. Determination of resistance to filiform corrosion
- BS-EN-ISO-4624 - Paints and varnishes. Pull-off test for adhesion
- BS-EN-ISO-4624-TC - Tracked Changes. Paints and varnishes. Pull-off test for adhesion
- BS-EN-ISO-4628-1 - Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-10 - Paints and varnishes. Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-10-TC - Tracked Changes. Paints and varnishes. Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-1-TC - Tracked Changes. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-2 - Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-2-TC - Tracked Changes. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-3 - Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-3-TC - Tracked Changes. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-4 - Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-4-TC - Tracked Changes. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-5 - Paints and varnishes. Evaluation of quantity and size of defects, and of intensity of uniform changes inappearance
- BS-EN-ISO-4628-5-TC - Tracked Changes. Paints and varnishes. Evaluation of quantity and size of defects, and of intensity of uniform changes inappearance
- BS-EN-ISO-4628-6 - Paints and varnishes. Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-6-TC - Tracked Changes. Paints and varnishes. Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-7 - Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-7-TC - Tracked Changes. Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-4628-8 - Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- BS-EN-ISO-6270-1 - Paints and varnishes. Determination of resistance to humidity
- BS-EN-ISO-6270-2 - Paints and varnishes. Determination of resistance to humidity
- BS-EN-ISO-6270-2-TC - Tracked Changes. Paints and varnishes. Determination of resistance to humidity
- BS-EN-ISO-6272 - Part E13: Falling Weight Resistance (Impact), Methods of Test for Paints
- BS-EN-ISO-6272-1 - Paints and varnishes. Rapid-deformation (impact resistance) tests
- BS-EN-ISO-6272-2 - Paints and varnishes. Rapid-deformation (impact resistance) tests
- BS-EN-ISO-6504-1 - Paints and varnishes. Determination of hiding power
- BS-EN-ISO-6504-3 - Paints and varnishes. Determination of hiding power
- BS-EN-ISO-6504-3-TC - Tracked Changes. Paints and varnishes. Determination of hiding power
- BS-EN-ISO-6860 - Paints and varnishes. Bend test (conical mandrel)
- BS-EN-ISO-6923 - Paints and varnishes. Determination of monomeric diisocyanate content in coating materials and similar products using high performance liquid chromatography with ultraviolet detection (HPLC-UV)
- BS-EN-ISO-7253 - Paints and Varnishes - Determination of Resistance To Neutral Salt Spray (Fog)
- BS-EN-ISO-7783 - Paints and varnishes. Determination of water-vapour transmission properties. Cup method
- BS-EN-ISO-7783-1 - Part 1: Determination of Water-Vapour Transmission Rate of Free Films (Dish Method)
- BS-EN-ISO-7783-2 - Part 2: Determination & Classification of Water-Vapour Transmission Rate (Permeability
- BS-EN-ISO-7783-TC - Tracked Changes. Paints and varnishes. Determination of water-vapour transmission properties. Cup method
- BS-EN-ISO-7784-1 - Paints and varnishes. Determination of resistance to abrasion
- BS-EN-ISO-7784-1-TC - Tracked Changes. Paints and varnishes. Determination of resistance to abrasion
- BS-EN-ISO-7784-2 - Paints and varnishes. Determination of resistance to abrasion
- BS-EN-ISO-7784-2-TC - Tracked Changes. Paints and varnishes. Determination of resistance to abrasion
- BS-EN-ISO-7784-3 - Paints and varnishes. Determination of resistance to abrasion
- BS-EN-ISO-7784-3-TC - Tracked Changes. Paints and varnishes. Determination of resistance to abrasion
- BS-EN-ISO-8130-1 - Coating powders
- BS-EN-ISO-8130-13 - Coating powders
- BS-EN-ISO-8130-15 - Coating powders.Rheology.
- BS-EN-ISO-8130-16 - Coating powders
- BS-EN-ISO-8130-3 - Coating powders
- BS-EN-ISO-8130-4 - Coating powders
- BS-EN-ISO-8130-9 - Coating powders
- BS-EN-ISO-9038 - Determination of sustained combustibility of liquids
- BS-EN-ISO-9038-TC - Tracked Changes. Determination of sustained combustibility of liquids
- BS-EN-ISO-9117-1 - Paints and varnishes. Drying tests
- BS-EN-ISO-9117-2 - Paints and varnishes. Drying tests
- BS-EN-ISO-9117-3 - Paints and varnishes. Drying tests
- BS-EN-ISO-9117-4 - Paints and varnishes. Drying tests
- BS-EN-ISO-9117-5 - Paints and varnishes. Drying tests
- BS-EN-ISO-9117-6 - Paints and varnishes. Drying tests
- BS-EN-ISO-9514 - Paints and varnishes. Determination of the pot life of multicomponent coating systems. Preparation and conditioning of samples and guidelines for testing
- BS-ISO-11997-1 - Paints & Varnishes, Determination of Resistance To Cyclic Corrosion Conditions, Wet (S
- BS-ISO-11997-3 - Paints and varnishes. Determination of resistance to cyclic corrosion conditions
- BS-ISO-12013-1 - Paints and varnishes. Determination of curing characteristics using a free damped oscillation method
- BS-ISO-12013-2 - Paints and varnishes. Determination of curing characteristics using a free damped oscillation method
- BS-ISO-15181-6 - Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of tralopyril release rate by quantitation of its degradation product in the extract
- BS-ISO-15710 - Paints & Varnishes, Corrosion Testing by Alternate Immersionin & Removal From a Buffer
- BS-ISO-16053 - Paints and varnishes. Coating materials and coating systems for exterior wood. Natural weathering test
- BS-ISO-16474-4 - Paints and varnishes. Methods of exposure to laboratory light sources
- BS-ISO-16482-1 - Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersions. Oven method
- BS-ISO-16482-2 - Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersions. Microwave method
- BS-ISO-16862 - Paints & Varnishes, Evaluation of Sag Resistance
- BS-ISO-19334 - Binders for Paints & Varnishes, Gum Rosin, Gas-Chromatographic Analysis
- BS-ISO-19396-1 - Paints and varnishes. Determination of pH value
- BS-ISO-19396-2 - Paints and varnishes. Determination of pH value
- BS-ISO-19399 - Paints and varnishes. Wedge-cut method for determination of film thickness (scribe and drill method)
- BS-ISO-19403-1 - Paints and varnishes. Wettability
- BS-ISO-19403-2 - Paints and varnishes. Wettability
- BS-ISO-19403-3 - Paints and varnishes. Wettability
- BS-ISO-19403-4 - Paints and varnishes. Wettability
- BS-ISO-19403-5 - Paints and varnishes. Wettability
- BS-ISO-19403-6 - Paints and varnishes. Wettability
- BS-ISO-19403-7 - Paints and varnishes. Wettability
- BS-ISO-20266 - Paints and varnishes. Determination of image clarity (degree of sharpness of reflected or transmitted image)
- BS-ISO-20567-1 - Paints & Varnishes, Determination of Stone-Chip Resistance of Coatings, Multi-Impact T
- BS-ISO-20567-2 - Paints & Varnishes, Determination of Stone-Chip Resistance of Coatings, Single-Impact
- BS-ISO-21545 - Paints and varnishes. Determination of settling
- BS-ISO-21546 - Paints and varnishes — Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
- BS-ISO-22516 - Paints and varnishes. Practical determination of non-volatile and volatile matter content during application
- BS-ISO-22518 - Paints and varnishes. Determination of solvents in water-thinnable coating materials. Gas-chromatographic method
- BS-ISO-22553-1 - Paints and varnishes. Electro-deposition coatings
- BS-ISO-22553-11 - Paints and varnishes. Electro-deposition coatings
- BS-ISO-22553-13 - Paints and varnishes. Electrodeposition coatings
- BS-ISO-22553-14 - Paints and varnishes. Electrodeposition coatings
- BS-ISO-22553-15 - Paints and varnishes. Electro-deposition coatings
- BS-ISO-22553-2 - Paints and varnishes. Electro-deposition coatings
- BS-ISO-22553-3 - Paints and varnishes. Electro-deposition coatings
- BS-ISO-22553-4 - Paints and varnishes. Electro-deposition coatings
- BS-ISO-22553-5 - Paints and varnishes. Electro-deposition coatings
- BS-ISO-22553-6 - Paints and varnishes. Electro-deposition coatings
- BS-ISO-22553-7 - Paints and varnishes. Electro-deposition coatings
- BS-ISO-22553-8 - Paints and varnishes. Electro-deposition coatings
- BS-ISO-22553-9 - Paints and varnishes. Electrodeposition coatings
- BS-ISO-22557 - Paints and varnishes. Scratch test using a spring-loaded pen
- BS-ISO-22969 - Paints and varnishes. Determination of solar reflectance
- BS-ISO-22970 - Paints and varnishes. Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage
- BS-ISO-22987 - Ships and marine technology. Laboratory test method for skin friction of antifouling paints by rotating drum
- BS-ISO-23168 - Paints and varnishes. Determination of water content. Gas-chromatographic method
- BS-ISO-23169 - Paints and varnishes. On-site test methods on quality assessment for interior wall coatings
- BS-ISO-23321 - Solvents for paints and varnished. Demineralized water for industrial applications. Specification and test methods
- BS-ISO-23322 - Paints and varnishes. Determination of solvents in coating materials containing organic solvents only. Gas-chromatographic method
- BS-ISO-23496 - Determination of pH value. Reference buffer solutions for the calibration of pH measuring equipment
- BS-ISO-23497 - Determination of pH value. Technical buffer solutions for the calibration of technical measuring installations
- BS-ISO-6272-2 - Paints & Varnishes, Rapid-Deformation (Impact Resistance) Tests, Falling-Weight Test,
- BS-ISO-6923 - Paints and varnishes. Determination of monomeric diisocyanate content in coating materials and similar products using high performance liquid chromatography with ultraviolet detection (HPLC-UV)
- BS-ISO-8130-16 - Coating powders
- BS-X-38 - Heat curing paint scheme for aerospace purposes. Specification
- DD-ENV-927-2 - Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification
- PD-CEN-16358 - Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of air inclusions/microfoam in coating films
- PD-CEN-16359 - Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of knot staining resistance of wood coatings
- PD-CEN-16360 - Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of film extensibility by indentation of a coating on a wooden substrate
- PD-CEN-16498 - Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of tannin staining
- PD-CEN-16499 - Paints and varnishes. Coating materials and coating systems for exterior wood. Resistance to blocking of paints and varnishes on wood
- PD-CEN-16700 - Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of resistance to impact of a coating on a wooden substrate
- PD-CEN-16969 - Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of end grain sealing performance
- PD-CEN-927-12 - Paints and varnishes. Coating materials and coating systems for exterior wood
- PD-CEN-927-8 - Paints and varnishes. Coating materials and coating systems for exterior wood
- PD-CEN-927-9 - Paints and varnishes. Coating materials and coating systems for exterior wood
- PD-CEN-927-9-TC - Tracked Changes. Paints and varnishes. Coating materials and coating systems for exterior wood
- PD-CEN-ISO-19392-2 - Paints and varnishes. Coating systems for wind-turbine rotor blades
- PD-CEN-ISO-19392-3 - Paints and varnishes. Coating systems for wind-turbine rotor blades
- PD-CEN-ISO-19392-5 - Paints and varnishes. Coating systems for wind-turbine rotor blades
- PD-CEN-ISO-19392-6 - Paints and varnishes. Coating systems for wind-turbine rotor blades
- PD-CEN-ISO-19397 - Determination of the film thickness of coatings using an ultrasonic gage
- PD-CEN-ISO-19402 - Paints and varnishes. Adhesion of coatings
- PD-CEN-ISO-20659-2 - Rheological test methods. Fundamentals and interlaboratory comparisons
- PD-CEN-ISO-21555 - Paints and varnishes. Overview of test methods on hardness and wear resistance of coatings
- PD-CEN-ISO-5601 - Paints and varnishes. Determination of volatile organic compound(VOC) and/or semi-volatile organic compound(SVOC) content. Best practices for the selection of test methods
- PD-CEN-ISO-5602 - Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials
- PD-ISO-11594 - Best practices for the creation/evaluation of fingerprint analysis in accordance with the ISO 28199 series
- PD-ISO-19392-1 - Paints and varnishes. Coating systems for wind-turbine rotor blades
- PD-ISO-19392-2 - Paints and varnishes. Coating systems for wind-turbine rotor blades
- PD-ISO-19392-3 - Paints and varnishes. Coating systems for wind-turbine rotor blades
- PD-ISO-19392-5 - Paints and varnishes. Coating systems for wind-turbine rotor blades
- PD-ISO-19392-6 - Paints and varnishes. Coating systems for wind-turbine rotor blades
- PD-ISO-19402 - Paints and varnishes. Adhesion of coatings
- PD-ISO-20659-1 - Rheological test methods. Fundamentals and interlaboratory comparisons
- PD-ISO-20659-2 - Rheological test methods. Fundamentals and interlaboratory comparisons
- PD-ISO-21555 - Paints and varnishes. Overview of test methods on hardness and wear resistance of coatings
- PD-ISO-5601 - Paints and varnishes. Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content. Guidance for the selection of test methods
- PD-ISO-5602 - Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials
- PD-ISO-5604 - Electrochemical noise measurement for assessing the protection of metal afforded by organic coatings
ISO:
- ISO-10890 - Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation
- ISO-11503 - Paints and varnishes - Determination of resistance to humidity (intermittent condensation)
- ISO-11507 - Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water
- ISO-11594 - Best practices for the creation/evaluation of fingerprint analysis in accordance with the ISO 28199 series
- ISO-11890-1 - Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Part 1: Gravimetric method for VOC determination
- ISO-11890-2 - Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method
- ISO-11890-2-AM1 - - Amendment 1: Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method - Amendment 1
- ISO-11997-1 - Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid
- ISO-11997-2 - Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light
- ISO-11997-3 - Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 3: Testing of coating systems on materials and components in automotive construction
- ISO-11998 - Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings
- ISO-12013-1 - Paints and varnishes - Determination of curing characteristics using a free damped oscillation method - Part 1: Start temperature of the curing reaction
- ISO-12013-2 - Paints and varnishes - Determination of curing characteristics using a free damped oscillation method - Part 2: Glass transition temperature
- ISO-12137 - Paints and varnishes - Determination of mar resistance
- ISO-12944-9 - Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
- ISO-13076 - Paints and varnishes - Lighting and procedure for visual assessments of coatings
- ISO-13129 - Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
- ISO-13803 - Paints and varnishes - Determination of haze on paint films at 20 degrees
- ISO-15091 - Paints and varnishes - Determination of electrical conductivity and resistance
- ISO-15110 - Paints and varnishes - Artificial weathering including acidic deposition
- ISO-1513 - Paints and varnishes - Examination and preparation of test samples
- ISO-1514 - Paints and varnishes - Standard panels for testing
- ISO-1516 - Determination of flash/no flash - Closed cup equilibrium method
- ISO-1517 - Paints and varnishes - Surface-drying test - Ballotini method
- ISO-1518 - Paints and varnishes - Scratch test
- ISO-1518-1 - Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method
- ISO-15181-1 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides
- ISO-15181-2 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
- ISO-15181-3 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract
- ISO-15181-4 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate
- ISO-15181-5 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract
- ISO-15181-6 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract
- ISO-1518-2 - Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method
- ISO-15184 - Paints and varnishes - Determination of film hardness by pencil test
- ISO-1519 - Paints and varnishes - Bend test (cylindrical mandrel)
- ISO-1520 - Paints and varnishes - Cupping test
- ISO-1522 - Paints and varnishes - Pendulum damping test
- ISO-1523 - Determination of flash point - Closed cup equilibrium method
- ISO-15234 - Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber
- ISO-1524 - Paints, varnishes and printing inks - Determination of fineness of grind
- ISO-15528 - Paints, varnishes and raw materials for paints and varnishes - Sampling
- ISO-15710 - Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution
- ISO-15711 - Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water
- ISO-16053 - Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
- ISO-16053-2 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
- ISO-16474-1 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance
- ISO-16474-2 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
- ISO-16474-2-AM1 - - Amendment 1: Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1: Classification of daylight filters
- ISO-16474-3 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
- ISO-16474-4 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 4: Open-flame carbon-arc lamps
- ISO-16482-1 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method
- ISO-16482-2 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method
- ISO-16773-1 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1: Terms and definitions
- ISO-16773-2 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data
- ISO-16773-3 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 3: Processing and analysis of data from dummy cells
- ISO-16773-4 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens
- ISO-16805 - Binders for paints and varnishes - Determination of glass transition temperature
- ISO-16862 - Paints and varnishes - Evaluation of sag resistance
- ISO-16925 - Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting
- ISO-16927 - Paints and varnishes - Determination of the overcoatability and recoatability of a coating
- ISO-17132 - Paints and varnishes - T-bend test
- ISO-17463 - Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
- ISO-17872 - Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
- ISO-17895 - Paints and varnishes - Determination of volatile organic compound (VOC) - Gas-chromatographic method with headspace injection for VOC determination
- ISO-19334 - Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis
- ISO-19392-1 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 1: Minimum requirements and weathering
- ISO-19392-2 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 2: Determination and evaluation of resistance to rain erosion using rotating arm
- ISO-19392-3 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 3: Determination and evaluation of resistance to rain erosion using water jet
- ISO-19392-5 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 5: Measurement of transmittance properties of UV protective coatings
- ISO-19392-6 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 6: Determination and evaluation of ice adhesion using centrifuge
- ISO-19396-1 - Paints and varnishes - Determination of pH value - Part 1: pH electrodes with glass membrane
- ISO-19396-2 - Paints and varnishes - Determination of pH value - Part 2: pH electrodes with ISFET technology
- ISO-19397 - Determination of the film thickness of coatings using an ultrasonic gage
- ISO-19399 - Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method)
- ISO-19402 - Paints and varnishes - Adhesion of coatings
- ISO-19403-1 - Paints and varnishes - Wettability - Part 1: Vocabulary and general principles
- ISO-20266 - Paints and varnishes - Determination of image clarity (degree of sharpness of reflected or transmitted image)
- ISO-20340 - Paints and varnishes - Performance requirements for protective paint systems for offshore and related structures
- ISO-20566 - Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
- ISO-20567-1 - Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
- ISO-20567-2 - Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
- ISO-20567-3 - Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body
- ISO-20567-4 - Paints and varnishes - Determination of stone-chip resistance of coatings - Part 4: Mobile multi-impact testing on a small testing area
- ISO-20659-1 - Rheological test methods - Fundamentals and interlaboratory comparisons - Part 1: Determination of the yield point
- ISO-20659-2 - Rheological test methods - Fundamentals and interlaboratory comparisons - Part 2: Determination of the time-dependent structural change (thixotropy)
- ISO-21227-1 - Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance
- ISO-21227-2 - Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2: Evaluation procedure for multi-impact stone-chipping test
- ISO-21227-3 - Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe
- ISO-21227-4 - Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion
- ISO-21545 - Paints and varnishes - Determination of settling
- ISO-21546 - Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
- ISO-21555 - Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings
- ISO-22516 - Paints and varnishes - Practical determination of non-volatile and volatile matter content during application
- ISO-22518 - Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method
- ISO-22553-1 - Paints and varnishes - Electro-deposition coatings - Part 1: Vocabulary
- ISO-22553-10 - Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection
- ISO-22553-11 - Paints and varnishes - Electro-deposition coatings - Part 11: Bath stability
- ISO-22553-12 - Paints and varnishes - Electro-deposition coatings - Part 12: Sedimentation on horizontal areas
- ISO-22553-13 - Paints and varnishes - Electro-deposition coatings - Part 13: Determination of re-solving behaviour
- ISO-22553-14 - Paints and varnishes - Electro-deposition coatings - Part 14: Deposition behaviour
- ISO-22553-2 - Paints and varnishes - Electro-deposition coatings - Part 2: Throwing power
- ISO-22553-3 - Paints and varnishes - Electro-deposition coatings - Part 3: Compatibility of electro-deposition coating materials with a reference oil
- ISO-22553-4 - Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials
- ISO-22553-5 - Paints and varnishes - Electro-deposition coatings - Part 5: Determination of sieve residue
- ISO-22553-6 - Paints and varnishes - Electro-deposition coatings - Part 6: Entry marks
- ISO-22553-7 - Paints and varnishes - Electro-deposition coatings - Part 7: Electrical wet-film resistance
- ISO-22553-8 - Paints and varnishes - Electro-deposition coatings - Part 8: Electric charge density
- ISO-22553-9 - Paints and varnishes - Electro-deposition coatings - Part 9: Stoving loss
- ISO-22557 - Paints and varnishes - Scratch test using a spring-loaded pen
- ISO-22969 - Paints and varnishes - Determination of solar reflectance
- ISO-22970 - Paints and varnishes - Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage
- ISO-22987 - Ships and marine technology - Laboratory test method for skin friction of antifouling paints by rotating drum
- ISO-23168 - Paints and varnishes - Determination of water content - Gas-chromatographic method
- ISO-23169 - Paints and varnishes - On-site test methods on quality assessment for interior wall coatings
- ISO-23321 - Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test methods
- ISO-23322 - Paints and varnishes - Determination of solvents in coating materials containing organic solvents only - Gas-chromatographic method
- ISO-23496 - Determination of pH value - Reference buffer solutions for the calibration of pH measuring equipment
- ISO-23497 - Determination of pH value - Technical buffer solutions for the calibration of technical measuring installations
- ISO-23811 - Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
- ISO-2409 - Paints and varnishes - Cross-cut test
- ISO-2431 - Paints and varnishes - Determination of flow time by use of flow cups
- ISO-24430 - Paints and varnishes - Guidelines for the determination of the precision of a test method by interlaboratory trials
- ISO-2808 - Paints and varnishes - Determination of film thickness
- ISO-2810 - Paints and varnishes - Natural weathering of coatings - Exposure and assessment
- ISO-2811-1 - Paints and varnishes - Determination of density - Part 1: Pycnometer method
- ISO-2811-2 - Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method
- ISO-2811-3 - Paints and varnishes - Determination of density - Part 3: Oscillation method
- ISO-2811-4 - Paints and varnishes - Determination of density - Part 4: Pressure cup method
- ISO-2812-1 - Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water
- ISO-2812-2 - Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method
- ISO-2812-3 - Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
- ISO-2812-4 - Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
- ISO-2812-5 - Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method
- ISO-2813 - Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
- ISO-2814 - Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour
- ISO-2815 - Paints and varnishes - Buchholz indentation test
- ISO-28199-1 - Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 1: Vocabulary and preparation of test panels
- ISO-28199-2 - Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling
- ISO-28199-3 - Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 3: Assessment of sagging, formation of bubbles, pinholing and hiding power
- ISO-2884-1 - Paints and varnishes - Determination of viscosity using rotational viscometers - Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates
- ISO-2884-2 - Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds
- ISO-3231 - Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide
- ISO-3233-1 - Paints and varnishes - Determination of percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes principle
- ISO-3233-2 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle
- ISO-3233-3 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
- ISO-3248 - Paints and varnishes - Determination of the effect of heat
- ISO-3251 - Paints, varnishes and plastics - Determination of non-volatile-matter content
- ISO-3270 - Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing
- ISO-3668 - Paints and varnishes - Visual comparison of colour of paints
- ISO-3679 - Determination of flash point . Method for flash no-flash and flash point by small scale closed cup tester
- ISO-3856-1 - Paints and varnishes - Determination of soluble metal content - Part 1: Determination of lead content - Flame atomic absorption spectrometric method and dithizone spectrophotometric method
- ISO-3856-2 - Paints and varnishes - Determination of soluble metal content - Part 2: Determination of antimony content - Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method
- ISO-3856-3 - Paints and varnishes - Determination of soluble metal content - Part 3: Determination of barium content - Flame atomic emission spectrometric method
- ISO-3856-4 - Paints and varnishes - Determination of soluble metal content - Part 4: Determination of cadmium content - Flame atomic absorption spectrometric method and polarographic method
- ISO-3856-5 - Paints and varnishes - Determination of soluble metal content - Part 5 : Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form - Diphenylcarbazide spectrophotometric method
- ISO-3856-6 - Paints and varnishes - Determination of soluble metal content - Part 6 : Determination of total chromium content of the liquid portion of the paint - Flame atomic absorption spectrometric method
- ISO-3856-7 - Paints and varnishes - Determination of soluble metal content - Part 7 : Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints - Flameless atomic absorption spectrometric method
- ISO-4618 - Paints and varnishes - Vocabulary
- ISO-4623-1 - Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates
- ISO-4623-2 - Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates
- ISO-4624 - Paints and varnishes - Pull-off test for adhesion
- ISO-4628-1 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
- ISO-4628-10 - Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
- ISO-4628-2 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
- ISO-4628-3 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
- ISO-4628-4 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
- ISO-4628-5 - Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
- ISO-4628-6 - Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method
- ISO-4628-7 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method
- ISO-4628-8 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
- ISO-5601 - Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Best practices for the selection of test methods
- ISO-5604 - Electrochemical noise measurement for assessing the protection of metal afforded by organic coatings
- ISO-6270-1 - Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure)
- ISO-6270-2 - Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
- ISO-6270-3 - Paints and varnishes - Determination of resistance to humidity - Part 3: Condensation (in-cabinet exposure with heated, bubbling water reservoir)
- ISO-6272-1 - Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
- ISO-6272-2 - Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
- ISO-6412-1 - Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation
- ISO-6503 - Paints and varnishes - Determination of total lead - Flame atomic absorption spectrometric method
- ISO-6504-1 - Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method for white and light-coloured paints
- ISO-6504-3 - Paints and varnishes - Determination of hiding power - Part 3: Determination of hiding power of paints for masonry, concrete and interior use
- ISO-6713 - Paints and varnishes - Preparation of acid extracts from paints in liquid or powder form
- ISO-6860 - Paints and varnishes - Bend test (conical mandrel)
- ISO-6923 - Paints and varnishes - Determination of monomeric diisocyanate content in coating materials and similar products using high performance liquid chromatography with ultraviolet detection (HPLC-UV)
- ISO-7252 - Paints and varnishes - Determination of total mercury - Flameless atomic absorption spectrometric method
- ISO-7724-2 - Paints and varnishes - Colorimetry - Part 2: Colour measurement
- ISO-7783 - Paints and varnishes - Determination of water-vapour transmission properties - Cup method
- ISO-7784-1 - Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen
- ISO-7784-2 - Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen
- ISO-7784-3 - Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
- ISO-8130-1 - Coating powders - Part 1: Determination of particle size distribution by sieving
- ISO-8130-10 - Coating powders - Part 10: Determination of deposition efficiency
- ISO-8130-11 - Coating powders - Part 11: Inclined-plane flow test
- ISO-8130-12 - Coating powders - Part 12: Determination of compatibility
- ISO-8130-13 - Coating powders - Part 13: Particle size analysis by laser diffraction
- ISO-8130-14 - Coating powders - Part 14: Vocabulary
- ISO-8130-15 - Coating powders - Part 15: Rheology
- ISO-8130-16 - Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder
- ISO-8130-2 - Coating powders - Part 2: Determination of density by gas comparison pycnometer (referee method)
- ISO-8130-3 - Coating powders - Part 3: Determination of density by liquid displacement pycnometer
- ISO-8130-4 - Coating powders - Part 4: Calculation of lower explosion limit
- ISO-8130-5 - Coating powders - Part 5: Determination of flow properties of a powder/air mixture
- ISO-8130-6 - Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
- ISO-8130-6-1 - Amendment 1 to ISO 8130-6:1992
- ISO-8130-7 - Coating powders - Part 7: Determination of loss of mass on stoving
- ISO-8130-8 - Coating powders - Part 8: Assessment of the storage stability of thermosetting powders
- ISO-8130-9 - Coating powders - Part 9: Sampling
- ISO-9117-1 - Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time
- ISO-9117-2 - Paints and varnishes - Drying tests - Part 2: Pressure test for stackability
- ISO-9117-3 - Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini
- ISO-9117-4 - Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder
- ISO-9117-5 - Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test
- ISO-9117-6 - Paints and varnishes - Drying tests - Part 6: Print-free test
- ISO-9514 - Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing
Other SDOs:
- CEN-ISO-19397 - Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015)
- DIN-EN-12206-1 - Part 1: Coatings Prepared From Coating Powder, Paints & Varnishes, Coatings of Alumini
- DIN-EN-927-2 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification
- DIN-EN-927-3 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
- DIN-EN-927-5 - Part 5: Assessment of the Liquid Water Permeability, Paintscoating Materials & Coatin
- DIN-EN-927-6 - Part 6: Exposure of Wood Coatings To Artificial Weathering Using Fluorescent Uv Lamps
- DIN-EN-ISO-11341 - Paints & Varnishes - Artificial Weathering & Exposure To Artificial Radiation, Exposur
- DIN-EN-ISO-11507 - Paints & Varnishes - Exposure of Coatings To Artificial Weathering - Exposure To Fluor
- DIN-EN-ISO-11890-2 - Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013)
- DIN-EN-ISO-11997-1 - Part 1: Wet (Salt Fog)/Dry/Humidity, Paints & Varnishes - Determination of Resistance
- DIN-EN-ISO-11997-2 - Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
- DIN-EN-ISO-11998 - Paints & Varnishes - Determination of Wet-Scrub Resistance & Cleanability of Coatings
- DIN-EN-ISO-12137-1 - Part 1: Method Using a Curved Stylus, Paints & Varnishes - Determination of Mar Resist
- DIN-EN-ISO-12137-2 - Part 2: Method Using a Pointed Stylus, Paints & Varnishes - Determination of Mar Resi
- DIN-EN-ISO-13803 - Paints and varnishes - Determination of haze on paint films at 20 Degrees
- DIN-EN-ISO-1516 - Determination of Flash/No Flash, Closed Cup Equilibrium Method
- DIN-EN-ISO-15181-1 - Part 1: General Method for Extraction of Biocides, Paints & Varnishes, Determination
- DIN-EN-ISO-15181-2 - Part 2: Determination of Copper-Iron Concentration in the Extract & Calculation of The
- DIN-EN-ISO-1519 - Paints & Varnishes - Bend Test (Cylindrical Mandrel)
- DIN-EN-ISO-1520 - Paint & Varnishes - Cupping Test
- DIN-EN-ISO-1522 - Paints & Varnishes - Pendulum Damping Test
- DIN-EN-ISO-1524 - Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013)
- DIN-EN-ISO-15710 - Paints & Varnishes - Corrosion Testing by Alternate Immersion in & Removal From a Buff
- DIN-EN-ISO-15711 - Paints & Varnishes, Determination of Resistance To Cathodic Disbonding of Coatings Ex
- DIN-EN-ISO-16773-1 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1: Terms and definitions
- DIN-EN-ISO-16773-2 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data
- DIN-EN-ISO-16862 - Paints & Varnishes - Evaluation of Sag Resistance
- DIN-EN-ISO-17872 - Paints & Varnishes - Guidelines for the Introduction of Scribe Marks Through Coatings
- DIN-EN-ISO-17895 - Paints & Varnishes, Determination of the Volatile Organic Compound Content of Low-Voc
- DIN-EN-ISO-20566 - Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013)
- DIN-EN-ISO-20567-1 - Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
- DIN-EN-ISO-20567-2 - Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
- DIN-EN-ISO-21227-1 - Part 1: General Guidance, Paints & Varnishes - Evaluation Ofdefects on Coated Surface
- DIN-EN-ISO-21227-2 - Part 2: Evaluation Procedure for Multi-Impact Stone-Chipping Test, Paints & Varnishes
- DIN-EN-ISO-2808 - Paints & Varnishes - Determination of Film Thickness
- DIN-EN-ISO-2810 - Paints & Varnishes, Natural Weathering of Coatings, Exposure & Assessment
- DIN-EN-ISO-2811-1 - Paints and varnishes - Determination of density - Part 1: Pycnometer method
- DIN-EN-ISO-2811-2 - Part 2: Immersed Body (Plummet) Method, Paints & Varnishes - Determination of Density
- DIN-EN-ISO-2811-3 - Part 3: Oscillation Method, Paints & Varnishes - Determination of Density
- DIN-EN-ISO-2812-1 - Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2007)
- DIN-EN-ISO-2812-2 - Part 2: Water Immersion Method, Paints & Varnishes - Determination of Resistance To Li
- DIN-EN-ISO-2812-3 - Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012)
- DIN-EN-ISO-2812-4 - Part 4: Spotting Methods, Paints & Varnishes - Determination of Resistance To Liquids
- DIN-EN-ISO-2812-5 - Part 5: Temperature-Gradient Oven Method, Paints & Varnishes - Determination of Resist
- DIN-EN-ISO-2814 - Paints and Varnishes. Comparison of Contrast Ratio (Hiding Power) of Paints of the Same Type and Colour
- DIN-EN-ISO-2884-1 - Part 1: Cone-&-Plate Viscometer Operated at a High Rate of Shear, Paints & Varnishes -
- DIN-EN-ISO-2884-2 - Part 2: Disc or Ball Viscometer Operated at a Specified Speed, Paints & Varnishes - De
- DIN-EN-ISO-3251 - Paints, Varnishes & Plastics, Determination of Non-Volatile-Matter Content
- DIN-EN-ISO-3679 - Determination of flash no-flash and flash point - Rapid equilibrium closed cup method
- DIN-EN-ISO-4623-1 - Part 1: Steel Substrates, Paints & Varnishes - Determinationof Resistance To Filiform
- DIN-EN-ISO-4623-2 - Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates
- DIN-EN-ISO-4628-1 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
- DIN-EN-ISO-4628-10 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
- DIN-EN-ISO-4628-2 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
- DIN-EN-ISO-4628-3 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
- DIN-EN-ISO-4628-4 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
- DIN-EN-ISO-4628-5 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
- DIN-EN-ISO-4628-6 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method
- DIN-EN-ISO-4628-7 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method
- DIN-EN-ISO-4628-8 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)
- DIN-EN-ISO-6270-2 - Part 2: Procedure for Exposing Test Specimens in Condensation-Water Atmospheres
- DIN-EN-ISO-6272-1 - Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
- DIN-EN-ISO-6272-2 - Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
- DIN-EN-ISO-6504-1 - Part 1: KUBELKA-Munk Method for White & Light-Coloured Paints, Paints & Varnishes - De
- DIN-EN-ISO-6504-3 - Part 3: Determination of Contrast Ratio of Light-Coloured Paints at a Fixed Spreading
- DIN-EN-ISO-6860 - Paints & Varnishes - Bend Test (Conical Mandrel)
- DIN-EN-ISO-7784-1 - Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen
- DIN-EN-ISO-7784-2 - Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen
- DIN-EN-ISO-7784-3 - Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
- DIN-EN-ISO-9038 - Determination of sustained combustibility of liquids (ISO 9038:2013)
- DIN-EN-ISO-9227 - Corrosion tests in artificial atmospheres - Salt spray tests
- DIN-ISO-8130-1 - Part 1: Determination of Particle Size Distribution by Sieving, Coating Powders
- DIN-ISO-8130-10 - Part 10: Determination of Deposition Efficiency, Coating Powders
- DIN-ISO-8130-11 - Part 11: Inclined-Plane Flow Test, Coating Powders
- DIN-ISO-8130-12 - Part 12: Determination of Compatibility, Coating Powders
- DIN-ISO-8130-13 - Part 13: Particle Size Analysis by Laser Diffraction, Coating Powders
- DIN-ISO-8130-2 - Part 2: Determination of Density by Gas Comparision Pyknometer (Referee Method), Coati
- DIN-ISO-8130-3 - Part 3: Determination of Density by Liquid Displacement Pyknometer, Coating Powders
- DIN-ISO-8130-4 - Part 4: Calculation of Lower Explosion Limit, Coating Powders
- DIN-ISO-8130-5 - Part 5: Determination of Flow Properties of a Powder/Air Mixture, Coating Powders
- DIN-ISO-8130-6 - Part 6: Determination of Gel Time of Thermosetting Coating Powders at a Given Temperat
- DIN-ISO-8130-7 - Part 7: Determination of Loss of Mass on Stoving, Coating Powders
- DIN-ISO-8130-8 - Part 8: Assessment of the Storage Stability of Thermosetting Powders, Coating Powders
- EN-1062-3 - Part 3: Determination of Liquid Water Permeability, Paints & Varnishes - Coating Mater
- EN-12206-1 - Paints & Varnishes, Coatings of Aluminium & Aluminium Alloys for Architectural Purpose
- EN-15060 - Paints & Varnishes, Guide for the Classification & Selection of Coating Systems for Wo
- EN-15457 - Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi
- EN-15458 - Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae
- EN-16074 - Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
- EN-16105 - Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water
- EN-16402 - Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing
- EN-16492 - Paints and varnishes - Evaluation of the surface disfigurement caused by fungi and algae on coatings
- EN-16623 - Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
- EN-927-1 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection
- EN-927-10 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 10: Resistance to blocking of paints and varnishes on wood
- EN-927-2 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification
- EN-927-3 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
- EN-927-5 - Part 5: Assessment of the Liquid Water Permeability, Paints & Varnishes - Coating Mat
- EN-927-6 - Paints & Varnishes, Coating Materials & Coating Systems for Exterior Wood, Exposure O
- EN-ISO-11341 - Paints & Varnishes - Artificial Weathering & Exposure To Artificial Radiation, Exposur
- EN-ISO-11507 - Paints & Varnishes, Exposure of Coatings To Artificial Weathering, Exposure To Fluores
- EN-ISO-11890-1 - Paints & Varnishes, Determination of Volatile Organic Compound (Voc) Content, Differen
- EN-ISO-11890-2 - Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013)
- EN-ISO-11997-1 - Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid
- EN-ISO-11997-2 - Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
- EN-ISO-11998 - Paints & Varnishes, Determination of Wet-Scrub Resistance & Cleanability of Coatings
- EN-ISO-12137 - Paints and varnishes - Determination of mar resistance
- EN-ISO-12137-1 - Part 1: Method Using a Curved Stylus, Paints & Varnishes - Determination of Mar Resist
- EN-ISO-12137-2 - Part 2: Method Using a Pointed Stylus, Paints & Varnishes - Determination of Mar Resi
- EN-ISO-12944-9 - Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
- EN-ISO-13076 - Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2012)
- EN-ISO-13129 - Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012)
- EN-ISO-13803 - Paints and varnishes - Determination of haze on paint films at 20 degrees
- EN-ISO-15091 - Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
- EN-ISO-15110 - Paints and varnishes - Artificial weathering including acidic deposition
- EN-ISO-1513 - Paints & Varnishes - Examination & Preparation of Test Samples
- EN-ISO-1518-1 - Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method
- EN-ISO-15181-1 - Paints & Varnishes, Determination of Release Rate of Biocides From Antifouling Paints,
- EN-ISO-15181-2 - Paints & Varnishes, Determination of Release Rate of Biocides From Antifouling Paints,
- EN-ISO-15181-3 - Paints & Varnishes, Determination of Release Rate of Biocides From Antifouling Paints,
- EN-ISO-15181-4 - Paints & Varnishes, Determination of Release Rate of Biocides From Antifouling Paints,
- EN-ISO-15181-5 - Paints & Varnishes, Determination of Release Rate of Biocides From Antifouling Paints,
- EN-ISO-15181-6 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract
- EN-ISO-1518-2 - Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method
- EN-ISO-15184 - Paints and varnishes - Determination of film hardness by pencil test (ISO 15184:2012)
- EN-ISO-1519 - Paints & Varnishes - Bend Test (Cylindrical Mandrel)
- EN-ISO-1520 - Paint & Varnishes, Cupping Test
- EN-ISO-1522 - Paints & Varnishes, Pendulum Damping Test
- EN-ISO-1524 - Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013)
- EN-ISO-15528 - Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013)
- EN-ISO-15710 - Paints & Varnishes - Corrosion Testing by Alternate Immersion in & Removal From a Buff
- EN-ISO-15711 - Paints & Varnishes, Determination of Resistance To Cathodic Disbonding of Coatings Ex
- EN-ISO-16474-1 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013)
- EN-ISO-16474-2 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013)
- EN-ISO-16474-3 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
- EN-ISO-16482-1 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method
- EN-ISO-16482-2 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method
- EN-ISO-16773-1 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1: Terms and definitions
- EN-ISO-16773-2 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data
- EN-ISO-16773-3 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 3: Processing and analysis of data from dummy cells
- EN-ISO-16773-4 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens
- EN-ISO-16805 - Binders for Paints & Varnishes, Determination of Glass Transition Temperature
- EN-ISO-16862 - Paints & Varnishes - Evaluation of Sag Resistance
- EN-ISO-16925 - Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014)
- EN-ISO-16927 - Paints and varnishes - Determination of the over coatability and recoatability of a coating (ISO 16927:2014)
- EN-ISO-17463 - Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
- EN-ISO-17652-2 - Part 2: Welding Properties of Shop Primers, Test for Shop Primers in Relation To Weldi
- EN-ISO-17872 - Paints & Varnishes - Guidelines for the Introduction of Scribe Marks Through Coatings
- EN-ISO-17895 - Paints & Varnishes, Determination of the Volatile Organic Compound Content of Low-Voc
- EN-ISO-19334 - Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis
- EN-ISO-19399 - Paints and varnishes. Wedge-cut method for determination of film thickness (scribe and drill method)
- EN-ISO-20566 - Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013)
- EN-ISO-20567-1 - Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
- EN-ISO-20567-2 - Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
- EN-ISO-21227-2 - Part 2: Evaluation Procedure for Multi-Impact Stone-Chipping Test, Paints & Varnishes
- EN-ISO-21227-3 - Part 3: Evaluation of Delamination & Corrosion Around a Scribe, Paints & Varnishes - E
- EN-ISO-21227-4 - Paints & Varnishes, Evaluation of Defects on Coated Surfaces Using Optical Imaging, Ev
- EN-ISO-23811 - Paints & Varnishes - Determination of Percentage Volume of Non-Volatile Matter by Meas
- EN-ISO-2409 - Paints and varnishes - Cross-cut test (ISO 2409:2013)
- EN-ISO-2431 - Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
- EN-ISO-2808 - Paints & Varnishes - Determination of Film Thickness
- EN-ISO-2810 - Paints & Varnishes, Natural Weathering of Coatings, Exposure & Assessment
- EN-ISO-2811-1 - Paints and varnishes - Determination of density - Part 1: Pycnometer method
- EN-ISO-2811-2 - Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method
- EN-ISO-2811-3 - Paints and varnishes - Determination of density - Part 3: Oscillation method
- EN-ISO-2811-4 - Paints and varnishes - Determination of density - Part 4: Pressure cup method
- EN-ISO-2812-1 - Part 1: Immersion in Liquids Other Than Water, Paints & Varnishes - Determination of R
- EN-ISO-2812-2 - Part 2: Water Immersion Method, Paints & Varnishes - Determination of Resistance To Li
- EN-ISO-2812-3 - Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012)
- EN-ISO-2812-4 - Part 4: Spotting Methods, Paints & Varnishes - Determination of Resistance To Liquids
- EN-ISO-2812-5 - Part 5: Temperature-Gradient Oven Method, Paints & Varnishes - Determination of Resist
- EN-ISO-2813 - Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
- EN-ISO-2814 - Paints and Varnishes. Comparison of Contrast Ratio (Hiding Power) of Paints of the Same Type and Colour
- EN-ISO-28199-1 - Part 1: Relevant Vocabulary & Preparation of Test Panels, Paints & Varnishes - Evaluat
- EN-ISO-28199-2 - Part 2: Colour Stability, Process Hiding Power, Re-Dissolving, Overspray Absorption, W
- EN-ISO-28199-3 - Part 3: Visual Assessment of Sagging, Formation of Bubbles, Pinholing & Hiding Power,
- EN-ISO-2884-1 - Part 1: Cone-&-Plate Viscometer Operated at a High Rate of Shear, Paints & Varnishes -
- EN-ISO-2884-2 - Part 2: Disc or Ball Viscometer Operated at a Specified Speed, Paints & Varnishes - De
- EN-ISO-3233-1 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013)
- EN-ISO-3233-2 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle
- EN-ISO-3233-3 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
- EN-ISO-3248 - Paints and varnishes - Determination of the effect of heat
- EN-ISO-3251 - Paints, Varnishes & Plastics, Determination of Non-Volatile-Matter Content
- EN-ISO-3679 - Determination of flash no-flash and flash point - Rapid equilibrium closed cup method
- EN-ISO-3680 - Determination of Flash/No Flash, Rapid Equilibrium Closed Cup Method
- EN-ISO-4618 - Paints and varnishes - Terms and definitions
- EN-ISO-4623-2 - Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates
- EN-ISO-4624 - Paints and varnishes - Pull-off test for adhesion
- EN-ISO-4628-1 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
- EN-ISO-4628-10 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
- EN-ISO-4628-2 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
- EN-ISO-4628-3 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
- EN-ISO-4628-4 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
- EN-ISO-4628-5 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
- EN-ISO-4628-6 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method
- EN-ISO-4628-7 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method
- EN-ISO-4628-8 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)
- EN-ISO-6270-2 - Part 2: Procedure for Exposing Test Specimens in Condensation-Water Atmospheres, Paint
- EN-ISO-6272-1 - Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
- EN-ISO-6272-2 - Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
- EN-ISO-6504-1 - Part 1: KUBELKA-Munk Method for White & Light-Coloured Paints, Paints & Varnishes - De
- EN-ISO-6504-3 - Paints & Varnishes, Determination of Hiding Power, Determination Fo Contrast Ratio Of
- EN-ISO-6860 - Paints & Varnishes, Bend Test (Conical Mandrel)
- EN-ISO-7783 - Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2018)
- EN-ISO-7784-1 - Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen
- EN-ISO-7784-2 - Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen
- EN-ISO-7784-3 - Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
- EN-ISO-8130-13 - Part 13: Particle Size Analysis by Laser Diffraction, Coating Powders
- EN-ISO-8130-14 - Coating powders - Part 14: Vocabulary (ISO 8130-14:2019)
- EN-ISO-8130-3 - Part 3: Determination of Density by Liquid Displacement Pyknometer, Coating Powders
- EN-ISO-9117-1 - Part 1: Determination of Through-Dry State & Through-Dry Time, Paints & Varnishes - Dr
- EN-ISO-9117-2 - Part 2: Pressure Test for Stackability, Paints & Varnishes - Drying Tests
- EN-ISO-9117-3 - Part 3: Surface-Drying Test Using Ballotini, Paints & Varnishes - Drying Tests
- EN-ISO-9117-4 - Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012)
- EN-ISO-9117-5 - Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)
- EN-ISO-9117-6 - Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012)
- EN-ISO-9514 - Paints & Varnishes, Determination of the Pot Life of Multicomponent Coating Systems -
- JIS-K-5516 - Ready mixed paints (Synthetic resin type)
- JIS-K-5531 - Nitrocellulose lacquer
- JIS-K-5600-1-2 - Testing methods for paints -- Part 1: General rules -- Section 2: Sampling
- JIS-K-5600-7-6 - Testing methods for paints -- Part 7: Long-period performance of film -- Section 6: Natural weathering
- JIS-K-5660 - Glossy synthetic resin emulsion paint
- JIS-K-6828-1 - Plastics -- Polymer dispersions -- Determination of non-volatile matter (residue) at specified temperatures
- JIS-K-6828-2 - Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature
- JIS-K-6828-3 - Plastics -- Polymer dispersions -- Determination of sieve residue (gross particle and coagulum content)
- JIS-Z-8921 - Carbon nanotube composite resin coating film
- SIS-184188 - Paints and varnishes - Scratch test
- SIS-CEN-927-9 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 9: Determination of pull-off strength after water exposure
- SIS-CEN-ISO-19392-1 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 1: Minimum requirements and weathering (ISO/TS 19392-1:2018)
- SIS-CEN-ISO-19392-2 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 2: Determination and evaluation of resistance to rain erosion using rotating arm (ISO/TS 19392-2:2018)
- SIS-CEN-ISO-19392-3 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 3: Determination and evaluation of resistance to rain erosion using water jet (ISO/TS 19392-3:2018)
- SIS-CEN-ISO/TR-11594 - Best practices for the creation/evaluation of fingerprint analysis in accordance with the ISO 28199 series (ISO/TR 11594:2022)
- SIS-CEN-ISO/TR-5602 - Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials (ISO/TR 5602:2021)
- SIS-CEN-ISO/TS-19397 - Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015)
- SIS-CEN/TS-16358 - Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of air inclusions/microfoam in coating films
- SIS-CEN/TS-16359 - Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of knot staining resistance of wood coatings
- SIS-CEN/TS-16360 - Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate
- SIS-CEN/TS-16498 - Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin staining
- SIS-CEN/TS-16499 - Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood
- SIS-CEN/TS-16700 - Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrate
- SIS-CEN/TS-927-8 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 8: Determination of the adhesion on wood after water exposure by a double-X-cut test
- SIS-CEN/TS-927-9 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 9: Determination of pull-off strength
- SIS-ISO/TS-19392-1 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 1: Minimum requirements and weathering
- SIS-ISO/TS-19392-2 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 2: Determination and evaluation of resistance to rain erosion using rotating arm
- SIS-ISO/TS-19392-3 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 2: Determination and evaluation of resistance to rain erosion using rotating arm
- SIS-ISO/TS-19392-5 - Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 5: Measurement of transmittance properties of UV protective coatings (ISO/TS 19392-5:2023, IDT)
- SIS-TS-44 - Execution of steel structures - Corrosion protection by protective paint systems
- SS-155123 - Paints, varnishes, petroleum and related products- Determination of flash point - Abel-Pensky closed tester
- SS-155126 - Paints, varnishes, petroleum and related products- Determination of flashpoint - Rapid equilibriummethod
- SS-155127 - Paints, varnishes, petroleum and related products- Flash/no flash test - Rapid equilibrium method
- SS-184101 - Paints and varnishes - Raw materials for paints and varnishes - Sampling
- SS-184105 - Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing
- SS-184111 - Paints and varnishes - Determination of density
- SS-184119 - Paints and varnishes - Determination of viscosityat a high rate of shear
- SS-184123 - Paints and varnishes - Determination of volume ofdry coating (non-volatile matter) obtained from agiven volume of liquid coating
- SS-184171 - Paints and varnishes - Pull-off test for adhesion
- SS-184177 - Paint and varnishes - Cupping test
- SS-184182 - Paints and varnishes - Determination of contrast ratio (opacity) of coloured paints at a fixed spreading rate (using polyester film)
- SS-184183 - Paints and varnishes - Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts)
- SS-184184 - Paints and varnishes - Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
- SS-184186 - Paints and varnishes - Pendulum damping test
- SS-184187 - Paints and varnishes - Determination of scratch resistance with pencils
- SS-184192 - Paints and varnishes - Determination of resistance to humidity (continuous condensation)
- SS-184201 - Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 1: General principles and rating schemes
- SS-184202 - Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 2: Designation of degree of blistering
- SS-184203 - Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 3: Designation of degree of rusting
- SS-184204 - Paints and varhishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 4: Designation of degree of cracking
- SS-184205 - Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 5: Designation of degree of flaking
- SS-184207 - Paint and varnisches - Surface-drying test - Ballotini method
- SS-184208 - Paints and varnishes - Print-free test
- SS-184211 - Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method for white and light coloured paints
- SS-184218 - Paints and varnishes - Determination of thicknessof a wet film
- SS-184219 - Paints and varnishes - Use of test panels with intentionally inflicted damage in the coating for evaluation of corrosion protection capacity
- SS-19100 - F"rgbeteckningssystem
- SS-19101 - CIE tristimulus values and chromaticity co-ordinates for some 16 000 colour notations according to SS 01 91 00
- SS-19103 - CIE tristimulus values and chromaticity co-ordinates for the colour samples in SS 01 91 02
- SS-31411 - Colours for coding purposes
- SS-EN-1062-1 - Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification
- SS-EN-1062-11 - Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing
- SS-EN-1062-3 - Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability
- SS-EN-1062-6 - Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability
- SS-EN-1062-7 - Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties
- SS-EN-12206-1 - Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder
- SS-EN-13300 - Paints and varnishes - Paints and varnishes for interior walls and ceilings - Classification
- SS-EN-13523-20 - Coil coated metals - Test methods - Part 20: Foam adhesion
- SS-EN-15060 - Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use
- SS-EN-15457 - Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi
- SS-EN-15458 - Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae
- SS-EN-15773 - Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
- SS-EN-16074 - Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
- SS-EN-16105 - Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water
- SS-EN-16402 - Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing
- SS-EN-16492 - Paints and varnishes - Evaluation of the surface disfigurement caused by fungi and algae on coatings
- SS-EN-16623 - Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
- SS-EN-16980-1 - Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials
- SS-EN-21513 - Paints and varnishes - Examination and preparation of samples for testing
- SS-EN-23270 - Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO 3270:1984)
- SS-EN-24624 - Paints and varnishes - Pull-off test
- SS-EN-29117 - Paints and varnishes - Determination of through-dry state and through-dry time - Method of test
- SS-EN-456 - Paints, varnishes and related products - Determination of flashpoint - Rapid equilibrium product
- SS-EN-535 - Paints and varnishes - Determination of flow timeby use of flow cups
- SS-EN-605 - Paints and varnishes - Standard panels for testing
- SS-EN-927-1 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection
- SS-EN-927-10 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 10: Resistance to blocking of paints and varnishes on wood
- SS-EN-927-13 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 13: Assessment of resistance to impact of a coating on a wooden substrate
- SS-EN-927-14 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 14: Determination of tensile properties of coating films
- SS-EN-927-2 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification
- SS-EN-927-3 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test
- SS-EN-927-4 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 4: Assessment of the water-vapour permeability
- SS-EN-927-5 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability
- SS-EN-927-6 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
- SS-EN-971-1 - Paints and varnishes - Terms and definitions for coating materials - Part 1: General terms
- SS-EN-ISO-10890 - Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation (ISO 10890:2010)
- SS-EN-ISO-11341 - Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:2004)
- SS-EN-ISO-11507 - Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007)
- SS-EN-ISO-11890-1 - Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
- SS-EN-ISO-11890-2 - Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020)
- SS-EN-ISO-11997-1 - Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017)
- SS-EN-ISO-11997-2 - Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
- SS-EN-ISO-11997-3 - Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 3: Testing of coating systems on materials and components in automotive construction (ISO 11997-3:2022)
- SS-EN-ISO-11998 - Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006)
- SS-EN-ISO-12137 - Paints and varnishes - Determination of mar resistance (ISO 12137:2011)
- SS-EN-ISO-12137-1 - Paints and varnishes - Determination of mar resistance - Part 1: Method using a curved stylus (ISO 12137-1:1997, including Technical Corrigendum 1:1998)
- SS-EN-ISO-12137-2 - Paints and varnishes - Determination of mar resistance - Part 2:Method using a pointed stylus (ISO 12137-2:1997)
- SS-EN-ISO-12944-9 - Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)
- SS-EN-ISO-13076 - Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2019)
- SS-EN-ISO-13129 - Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012)
- SS-EN-ISO-13736 - Determination of flash point - Abel closed-cup method (ISO 13736:2021)
- SS-EN-ISO-13736-AM1 - Determination of flash point - Abel closed-cup method - Amendment 1: Bias statement update (ISO 13736:2021/Amd 1:2022)
- SS-EN-ISO-13803 - Paints and varnishes - Determination of haze on paint films at 20 degrees (ISO 13803:2014)
- SS-EN-ISO-15091 - Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2020)
- SS-EN-ISO-15110 - Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)
- SS-EN-ISO-1513 - Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
- SS-EN-ISO-1514 - Paints and varnishes - Standard panels for testing (ISO 1514:2016, IDT)
- SS-EN-ISO-1516 - Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002)
- SS-EN-ISO-1517 - Paints and varnishes - Surface drying test - Ballotini method (ISO 1517:1973)
- SS-EN-ISO-1518 - Paints and varnishes - Scratch test (ISO 1518:1992)
- SS-EN-ISO-1518-1 - Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2019)
- SS-EN-ISO-15181-1 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007)
- SS-EN-ISO-15181-2 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate (ISO 15181-2:2007)
- SS-EN-ISO-15181-3 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis (dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract (ISO 15181-3:2007)
- SS-EN-ISO-15181-4 - Paints and Varnishes - Determination of release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate (ISO 15181-4:2008)
- SS-EN-ISO-15181-5 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract (ISO 15181-5:2008)
- SS-EN-ISO-15181-6 - Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract (ISO 15181-6:2012)
- SS-EN-ISO-1518-2 - Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2019)
- SS-EN-ISO-15184 - Paints and varnishes - Determination of film hardness by pencil test (ISO 15184:2020)
- SS-EN-ISO-1519 - Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
- SS-EN-ISO-1520 - Paints and varnishes - Cupping test (ISO 1520:2006)
- SS-EN-ISO-1522 - Paints and varnishes - Pendulum damping test (ISO 1522:2022)
- SS-EN-ISO-1523 - Determination of flash-point - Closed cup equilibrium method (ISO 1523:2002)
- SS-EN-ISO-15234 - Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999)
- SS-EN-ISO-1524 - Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2020)
- SS-EN-ISO-15528 - Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2020)
- SS-EN-ISO-15710 - Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002)
- SS-EN-ISO-15711 - Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003)
- SS-EN-ISO-16474-1 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013)
- SS-EN-ISO-16474-2 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013)
- SS-EN-ISO-16474-2-AM1 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1: Classification of daylight filters (ISO 16474-2:2013/Amd 1:2022)
- SS-EN-ISO-16474-3 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
- SS-EN-ISO-16482-1 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method (ISO 16482-1:2013)
- SS-EN-ISO-16482-2 - Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method (ISO 16482-2:2013)
- SS-EN-ISO-16773-1 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1: Terms and definitions (ISO 16773-1:2016)
- SS-EN-ISO-16773-2 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016)
- SS-EN-ISO-16773-3 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 3: Processing and analysis of data from dummy cells (ISO 16773-3:2016)
- SS-EN-ISO-16773-4 - Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017)
- SS-EN-ISO-16805 - Binders for paints and varnishes - Determination of glass transition temperature (ISO 16805:2003)
- SS-EN-ISO-16862 - Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003)
- SS-EN-ISO-16925 - Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2021)
- SS-EN-ISO-16927 - Paints and varnishes - Determination of the overcoatability and recoatability of a coating (ISO 16927:2014)
- SS-EN-ISO-17132 - Paints and varnishes - T-bend test (ISO 17132:2007)
- SS-EN-ISO-17463 - Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2022)
- SS-EN-ISO-17872 - Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2019)
- SS-EN-ISO-17895 - Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005)
- SS-EN-ISO-19334 - Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis (ISO 19334:2010)
- SS-EN-ISO-19396-1 - Paints and varnishes - Determination of pH value - Part 1: pH electrodes with glass membrane (ISO 19396-1:2017)
- SS-EN-ISO-19396-2 - Paints and varnishes - Determination of pH value - Part 2: pH electrodes with ISFET technology (ISO 19396-2:2017)
- SS-EN-ISO-19399 - Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016)
- SS-EN-ISO-19403-1 - Paints and varnishes - Wettability - Part 1: Vocabulary and general principles (ISO 19403-1:2022)
- SS-EN-ISO-20266 - Paints and varnishes - Determination of image clarity (degree of sharpness of reflected or transmitted image) (ISO 20266:2018)
- SS-EN-ISO-20566 - Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2019)
- SS-EN-ISO-20567-1 - Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2017)
- SS-EN-ISO-20567-2 - Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2023)
- SS-EN-ISO-20567-3 - Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012)
- SS-EN-ISO-21227-1 - Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003)
- SS-EN-ISO-21227-2 - Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2: Evaluation procedure for multi-impact stone-chipping test (ISO 21227-2:2006)
- SS-EN-ISO-21227-3 - Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007)
- SS-EN-ISO-21227-4 - Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion (ISO 21227-4:2008)
- SS-EN-ISO-21545 - Paints and varnishes - Determination of settling (ISO 21545:2018)
- SS-EN-ISO-21546 - Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
- SS-EN-ISO-22479 - Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
- SS-EN-ISO-22516 - Paints and varnishes - Practical determination of non-volatile and volatile matter content during application (ISO 22516:2019)
- SS-EN-ISO-22518 - Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019)
- SS-EN-ISO-22553-1 - Paints and varnishes - Electro-deposition coatings - Part 1: Vocabulary (ISO 22553-1:2019)
- SS-EN-ISO-22553-10 - Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553-10:2022)
- SS-EN-ISO-22553-11 - Paints and varnishes - Electro-deposition coatings - Part 11: Bath stability (ISO 22553-11:2020)
- SS-EN-ISO-22553-12 - Paints and varnishes - Electro-deposition coatings - Part 12: Sedimentation on horizontal areas (ISO 22553-12:2020)
- SS-EN-ISO-22553-13 - Paints and varnishes - Electro-deposition coatings - Part 13: Determination of re-solving behaviour (ISO 22553-13:2021)
- SS-EN-ISO-22553-14 - Paints and varnishes - Electro-deposition coatings - Part 14: Deposition behaviour (ISO 22553-14:2021)
- SS-EN-ISO-22553-15 - Paints and varnishes - Electro-deposition coatings - Part 15: Permeate residues (ISO 22553-15:2022)
- SS-EN-ISO-22553-16 - Paints and varnishes - Electro-deposition coatings - Part 16: Pigment-binder ratio (ISO 22553-16:2022)
- SS-EN-ISO-22553-2 - Paints and varnishes - Electro-deposition coatings - Part 2: Throwing power (ISO 22553-2:2019)
- SS-EN-ISO-22553-3 - Paints and varnishes - Electro-deposition coatings - Part 3: Compatibility of electro-deposition coating materials with a reference oil (ISO 22553-3:2019)
- SS-EN-ISO-22553-4 - Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials (ISO 22553-4:2019)
- SS-EN-ISO-22553-5 - Paints and varnishes - Electro-deposition coatings - Part 5: Determination of sieve residue (ISO 22553-5:2019)
- SS-EN-ISO-22553-6 - Paints and varnishes - Electro-deposition coatings - Part 6: Entry marks (ISO 22553-6:2019)
- SS-EN-ISO-22553-7 - Paints and varnishes - Electro-deposition coatings - Part 7: Electrical wet-film resistance (ISO 22553-7:2020)
- SS-EN-ISO-22553-8 - Paints and varnishes - Electro-deposition coatings - Part 8: Electric charge density (ISO 22553-8:2020)
- SS-EN-ISO-22553-9 - Paints and varnishes - Electro-deposition coatings - Part 9: Stoving loss (ISO 22553-9:2020)
- SS-EN-ISO-22557 - Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019)
- SS-EN-ISO-22969 - Paints and varnishes - Determination of solar reflectance (ISO 22969:2019)
- SS-EN-ISO-22970 - Paints and varnishes - Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage (ISO 22970:2019)
- SS-EN-ISO-23168 - Paints and varnishes - Determination of water content - Gas-chromatographic method (ISO 23168:2019)
- SS-EN-ISO-23321 - Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test methods (ISO 23321:2019)
- SS-EN-ISO-23322 - Paints and varnishes - Determination of solvents in coating materials containing organic solvents only - Gas-chromatographic method (ISO 23322:2021)
- SS-EN-ISO-23811 - Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)
- SS-EN-ISO-2431 - Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019)
- SS-EN-ISO-2808 - Paints and varnishes - Determination of film thickness (ISO 2808:2019)
- SS-EN-ISO-2810 - Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2020)
- SS-EN-ISO-2811-1 - Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
- SS-EN-ISO-2811-2 - Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
- SS-EN-ISO-2811-3 - Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023)
- SS-EN-ISO-2811-4 - Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011)
- SS-EN-ISO-2812-1 - Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)
- SS-EN-ISO-2812-2 - Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2018)
- SS-EN-ISO-2812-3 - Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2019)
- SS-EN-ISO-2812-4 - Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017)
- SS-EN-ISO-2812-5 - Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2018)
- SS-EN-ISO-2813 - Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees (ISO 2813:2014)
- SS-EN-ISO-2814 - Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour (ISO 2814:1973)
- SS-EN-ISO-2815 - Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
- SS-EN-ISO-28199-1 - Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 1: Vocabulary and preparation of test panels (ISO 28199-1:2021)
- SS-EN-ISO-28199-2 - Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2021)
- SS-EN-ISO-28199-3 - Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 3: Assessment of sagging, formation of bubbles, pinholing and hiding power (ISO 28199-3:2021)
- SS-EN-ISO-2884-1 - Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
- SS-EN-ISO-2884-2 - Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
- SS-EN-ISO-3231 - Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
- SS-EN-ISO-3233-1 - Paints and varnishes - Determination of percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes principle (ISO 3233-1:2019)
- SS-EN-ISO-3233-2 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2019)
- SS-EN-ISO-3233-3 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015)
- SS-EN-ISO-3248 - Paints and varnishes - Determination of the effect of heat (ISO 3248:2016, IDT)
- SS-EN-ISO-3251 - Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019)
- SS-EN-ISO-3668 - Paints and varnishes - Visual comparison of colour of paints (ISO 3668:2017)
- SS-EN-ISO-3678 - Paints and varnishes - Print-free test (ISO 3678:1976)
- SS-EN-ISO-3679 - Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester (ISO 3679:2022)
- SS-EN-ISO-3680 - Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)
- SS-EN-ISO-4617 - Paints and varnishes - List of equivalent terms (ISO 4617:2000)
- SS-EN-ISO-4618 - Paints and varnishes - Terms and definitions (ISO 4618:2014)
- SS-EN-ISO-4618-2 - Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties (ISO 4618-2:1999)
- SS-EN-ISO-4618-3 - Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and methods of application (ISO 4618-3:1999)
- SS-EN-ISO-4622 - Paints and varnishes - Pressure test for stackability (ISO 4622:1992)
- SS-EN-ISO-4623 - Paints and varnishes - Filiform corrosion test onsteel (ISO 4623:1984)
- SS-EN-ISO-4623-1 - Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2018)
- SS-EN-ISO-4623-2 - Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016, IDT)
- SS-EN-ISO-4628-1 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016)
- SS-EN-ISO-4628-10 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2016)
- SS-EN-ISO-4628-2 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
- SS-EN-ISO-4628-3 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
- SS-EN-ISO-4628-4 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
- SS-EN-ISO-4628-5 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2022)
- SS-EN-ISO-4628-6 - Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2023)
- SS-EN-ISO-4628-7 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016)
- SS-EN-ISO-4628-8 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)
- SS-EN-ISO-6270 - Paints and varnishes - Determination of resistance to humidity (continous condensation) (ISO 6270:1980)
- SS-EN-ISO-6270-1 - Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017)
- SS-EN-ISO-6270-2 - Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir) (ISO 6270-2:2017)
- SS-EN-ISO-6272 - Paints and varnishes - Falling-weight test (ISO 6272:1993)
- SS-EN-ISO-6272-1 - Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
- SS-EN-ISO-6272-2 - Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
- SS-EN-ISO-6504-1 - Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method for white and light-coloured paints (ISO 6504-1:2019)
- SS-EN-ISO-6504-3 - Paints and varnishes - Determination of hiding power - Part 3: Determination of hiding power of paints for masonry, concrete and interior use (ISO 6504-3:2019)
- SS-EN-ISO-6860 - Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006)
- SS-EN-ISO-7253 - Paints and varnishes - Determination of resistance to netural salt spray (fog) (ISO 7253:1996)
- SS-EN-ISO-7579 - Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009)
- SS-EN-ISO-7783 - Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2018)
- SS-EN-ISO-7783-1 - Paints and varnishes - Determination of water vapour transmission rate - Part 1: Dish methods for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998)
- SS-EN-ISO-7783-2 - Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification fo water-varpour transmission rate (permeability) (ISO 7783-2:1999)
- SS-EN-ISO-7784-1 - Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2016)
- SS-EN-ISO-7784-2 - Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016)
- SS-EN-ISO-7784-3 - Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen (ISO 7784-3:2022)
- SS-EN-ISO-8130-1 - Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019)
- SS-EN-ISO-8130-10 - Coating powders - Part 10: Determination of deposition efficiency (ISO 8130-10:2021)
- SS-EN-ISO-8130-11 - Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:2019)
- SS-EN-ISO-8130-12 - Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019)
- SS-EN-ISO-8130-13 - Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
- SS-EN-ISO-8130-14 - Coating powders - Part 14: Vocabulary (ISO 8130-14:2019)
- SS-EN-ISO-8130-15 - Coating powders - Part 15: Rheology (ISO 8130-15:2023)
- SS-EN-ISO-8130-16 - Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022)
- SS-EN-ISO-8130-2 - Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method) (ISO 8130-2:2021)
- SS-EN-ISO-8130-3 - Coating powders - Part 3: Determination of density by liquid displacement pyknometer (ISO 8130-3:2021)
- SS-EN-ISO-8130-4 - Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:2021)
- SS-EN-ISO-8130-5 - Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
- SS-EN-ISO-8130-6 - Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)
- SS-EN-ISO-8130-7 - Coating powders - Part 7: Determination of loss of mass on stoving (ISO 8130-7:2019)
- SS-EN-ISO-8130-8 - Coating powders - Part 8: Assessment of the storage stability of thermosetting powders (ISO 8130-8:2021)
- SS-EN-ISO-8130-9 - Coating powders - Part 9: Sampling (ISO 8130-9:1992)
- SS-EN-ISO-8501-1 - Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007)
- SS-EN-ISO-9038 - Determination of sustained combustibility of liquids (ISO 9038:2021)
- SS-EN-ISO-9117-1 - Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
- SS-EN-ISO-9117-2 - Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010)
- SS-EN-ISO-9117-3 - Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)
- SS-EN-ISO-9117-4 - Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012)
- SS-EN-ISO-9117-5 - Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)
- SS-EN-ISO-9117-6 - Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012)
- SS-EN-ISO-9227 - Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2022)
- SS-EN-ISO-9514 - Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2019)
- SS-ENV-927-2 - Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification
- SS-ISO-1524 - Paints and varnishes - Determination of fineness of grind
- SS-ISO-16053 - Paints and varnishes Coating materials and coating systems for exterior wood Natural weathering test (ISO 16053:2022, IDT)
- SS-ISO-19399 - Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016, IDT)
- SS-ISO-20340 - Paints and varnishes - Performance requirements for protective paint systems for offshore and related structures (ISO 20340:2009, IDT)
- SS-ISO-21545 - Paints and varnishes - Determination of settling (ISO 21545:2018, IDT)
- SS-ISO-22516 - Paints and varnishes - Practical determination of non-volatile and volatile matter content during application (ISO 22516:2019, IDT)
- SS-ISO-22518 - Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019, IDT)
- SS-ISO-22557 - Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019, IDT)
- SS-ISO-22969 - Paints and varnishes - Determination of solar reflectance (ISO 22969:2019, IDT)
- SS-ISO-23168 - Paints and varnishes - Determination of water content - Gas-chromatographic method (ISO 23168:2019, IDT)
- SS-ISO-23321 - Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test methods (ISO 23321:2019, IDT)
- SS-ISO-23496 - Determination of pH value - Reference buffer solutions for the calibration of pH measuring equipment (ISO 23496:2019, IDT)
- SS-ISO-2814 - Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour
- SS-ISO-2815 - Paints and varnishes - Buchholz indentation test
- SS-ISO-3248 - Solvents for paints and varnishes - Gum spirit of turpentine and wood turpentines - Requirements and methods of test
- SS-ISO-3668 - Paints and varnishes - Visual comparison of the colour of paints
- SS-ISO-4623 - Paints and varnishes - Filiform corrosion test onsteel
- SS-ISO-6713 - Paints and varnishes - Preparation of acid extracts from paints in liquid or powder form
- SS-ISO-8820-11 - Road vehicles - Fuse-links - Part 11: Fuse-links with tabs (blade type) Type M (medium-high current) (ISO 8820-11:2020, IDT)
- UNE-48243 - Paints and varnishes. Water dispersion paint, flat, indoors use.
- UNE-EN-16623 - Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
- UNE-EN-ISO-2811-1 - Paints and varnishes - Determination of density - Part 1: Pycnometer method
- UNE-EN-ISO-2813 - Paints and varnishes - Determination of gloss value at 20-¦, 60-¦ and 85-¦
- UNE-EN-ISO-3233-3 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
- UNE-EN-ISO-4618 - Paints and varnishes - Terms and definitions
- UNE-EN-ISO-7784-1 - Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen
- UNE-EN-ISO-7784-2 - Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen
- UNE-EN-ISO-7784-3 - Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen