Document Center List of Standards on Packaging And Distribution Of Goods In General
ICS Code 55.020
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C1613 - Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks
- ASTM-D1083 - Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates (Withdrawn 2001)
- ASTM-D3096 - Test Method for Liquid Density of Pressurized Products (Withdrawn 1991)
- ASTM-D3469 - Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures (Withdrawn 2016)
- ASTM-D3470 - Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures (Withdrawn 2016)
- ASTM-D3472 - Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures (Withdrawn 2016)
- ASTM-D3475 - Standard Classification of Child-Resistant Packages
- ASTM-D3481 - Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
- ASTM-D3810 - Standard Test Method for Minimum Application Torque of Type IA Child-Resistant Closures (Withdrawn 2016)
- ASTM-D3951 - Standard Practice for Commercial Packaging
- ASTM-D3968 - Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures (Withdrawn 2016)
- ASTM-D4003 - Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
- ASTM-D4332 - Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing
- ASTM-D4334 - Standard Practice for Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
- ASTM-D4335 - Standard Practice for Determination of Component Retention of a Mechanical Pump Dispenser
- ASTM-D4728 - Standard Test Method for Random Vibration Testing of Shipping Containers
- ASTM-D4760 - Test Method for Proper Resecuring of Type 1 (Continuous Thread) Child-Resistant Closures (Withdrawn 1997)
- ASTM-D4919 - Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings
- ASTM-D5445 - Standard Practice for Pictorial Markings for Handling of Goods
- ASTM-D6344 - Standard Test Method for Concentrated Impacts to Transport Packages
- ASTM-D6834 - Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser (Withdrawn 2017)
- ASTM-D7790 - Standard Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing
- ASTM-D7860 - Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment
- ASTM-D8135 - Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests
- ASTM-D996 - Standard Terminology of Packaging and Distribution Environments
- ASTM-E2631 - Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label
- ASTM-E2671 - Standard Practice for Defining Movements, Shipments, and Transfers of Tangible Property
- ASTM-E460 - Standard Practice for Determining Effect of Packaging on Food and Beverage Products During Storage
- ASTM-E954 - Standard Practice for Packaging and Shipping of Laboratory Samples of Refuse-Derived Fuel (Withdrawn 2002)
- ASTM-F1167 - Terminology Relating to Aseptic Packaging (Withdrawn 1993)
- ASTM-F1307 - Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
- ASTM-F1585 - Standard Guide for Integrity Testing of Porous Barrier Medical Packages (Withdrawn 2006)
- ASTM-F2097 - Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
- ASTM-F2466 - Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
- ASTM-F2475 - Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
- ASTM-F3263 - Standard Guide for Packaging Test Method Validation
BSI:
- BS-1133-5 - Protection Against Spoilage of Packages and Their Contents by Micro-Organisms, Insects
- BS-1133-6.2 - Packaging Code Section 6: Protection of Metal Surfaces Against Corrosion During Transport and Storage Subsection 6.2: Temporary Protectives and Their Application
- BS-2770 - Specification for pictorial marking of handling instructions for goods in transit
- BS-2770-1 - Recommendations for the pictorial marking of goods in transit. Handling instructions for non-dangerous goods
- BS-2770-2 - Recommendations for the pictorial marking of goods in transit. Packages containing photographic materials sensitive to radiant energy
- BS-4672-1 - Guide to hazards in the transport and storage of packages
- BS-4672-2 - Guide to hazards in the transport and storage of packages.
- BS-5321 - Specification. Reclosable pharmaceutical containers resistant to opening by children
- BS-6652 - Specification for packagings resistant to opening by children
- BS-6720 - Specification for marking transit information on packages for distribution
- BS-6837 - Specification for plan dimensions of rigid rectangular transport packages with a modular relationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads
- BS-6884 - Recommendations for plan dimensions of unit loads
- BS-EN-13010 - Packaging. Unit packaging. Dimensions and requirements for pegboard display
- BS-EN-13427 - Packaging. Requirements for the use of European Standards in the field of packaging and packaging waste
- BS-EN-13428 - Packaging. Requirements specific to manufacturing and composition. Prevention by source reduction
- BS-EN-13430 - Packaging. Requirements for packaging recoverable by material recycling
- BS-EN-13431 - Packaging. Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
- BS-EN-14375 - Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing
- BS-EN-14375-TC - Tracked Changes. Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing
- BS-EN-15593 - Packaging. Management of hygiene in the production of packaging for foodstuffs. Requirements
- BS-EN-15823 - Packaging. Braille on packaging for medicinal products
- BS-EN-15946 - Conservation of cultural property. Packing principles for transport
- BS-EN-16247-4 - Energy audits
- BS-EN-16247-4-TC - Tracked Changes. Energy audits
- BS-EN-16679 - Packaging. Tamper verification features for medicinal product packaging
- BS-EN-17929 - Hyperloop Transport Services
- BS-EN-20780 - Packaging. Pictorial marking for handling of goods
- BS-EN-28317 - Child-Resistant Packaging, Requirements & Testing Procedures for Reclosable Packages
- BS-EN-415-7 - Safety of packaging machines
- BS-EN-862 - Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
- BS-EN-862-TC - Tracked Changes. Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
- BS-EN-ISO-13127 - Packaging. Child resistant packaging. Mechanical test methods for reclosable child resistant packaging systems
- BS-EN-ISO-13274 - Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs
- BS-EN-ISO-16104 - Packaging. Transport packaging for dangerous goods. Test methods
- BS-EN-ISO-16106 - Transport packages for dangerous goods. Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings. Guidelines for the application of ISO 9001
- BS-EN-ISO-16495 - Packaging. Transport packaging for dangerous goods. Test methods
- BS-EN-ISO-16495-TC - Tracked Changes. Packaging. Transport packaging for dangerous goods. Test methods
- BS-EN-ISO-17351 - Packaging. Braille on packaging for medicinal products
- BS-EN-ISO-17480 - Packaging. Accessible design. Ease of opening
- BS-EN-ISO-21976 - Packaging. Tamper verification features for medicinal product packaging
- BS-EN-ISO-23667 - Packaging. Transport packaging for dangerous goods. Rigid plastics and plastics composite IBCs. Compatibility testing
- BS-EN-ISO-28862 - Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
- BS-EN-ISO-780 - Packaging. Distribution packaging. Graphical symbols for handling and storage of packages
- BS-EN-ISO-780-TC - Tracked Changes. Packaging. Distribution packaging. Graphical symbols for handling and storage of packages
- BS-EN-ISO-8317 - Child-resistant packaging. Requirements and testing procedures for reclosable packages
- BSI-FLEX-6228 - Plastic packaging. Assessment of recycled content within polyethylene terephthalate (PET) virgin material and recyclate blended packaging materials produced from mechanical recycling methods. Specification and test methods
- BS-ISO-14375 - Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing
- BS-ISO-15394 - Packaging. Bar code and two-dimensional symbols for shipping, transport and receiving labels
- BS-ISO-15394-TC - Tracked Changes. Packaging. Bar code and two-dimensional symbols for shipping, transport and receiving labels
- BS-ISO-16883 - Packaging. Transport packages for dangerous goods. Test methods for large packagings
- BS-ISO-17098 - Packaging material recycling. Report on substances and materials which may impede recycling
- BS-ISO-17363 - Supply chain applications of RFID. Freight containers
- BS-ISO-17364 - Supply chain applications of RFID. Returnable transport items (RTIs) and returnable packaging items (RPIs)
- BS-ISO-17365 - Supply chain applications of RFID. Transport units
- BS-ISO-17366 - Supply chain applications of RFID. Product packaging
- BS-ISO-17367 - Supply chain applications of RFID. Product tagging
- BS-ISO-17451-1 - Packaging. Codification of contents for inventories for shipments of household goods and personal effects
- BS-ISO-17480 - Packaging. Accessible design. Ease of opening
- BS-ISO-19709-1 - Transport packaging. Small load container systems
- BS-ISO-19809 - Packaging. Accessible design. Information and marking
- BS-ISO-21067 - Packaging. Vocabulary
- BS-ISO-21067-1 - Packaging. Vocabulary
- BS-ISO-21067-1-TC - Tracked Changes. Packaging. Vocabulary
- BS-ISO-21067-2 - Packaging. Vocabulary
- BS-ISO-21976 - Packaging. Tamper verification features for medicinal product packaging
- BS-ISO-22015 - Packaging. Accessible design. Handling and manipulation
- BS-ISO-22742 - Packaging. Linear bar code and two-dimensional symbols for product packaging
- BS-ISO-22982-1 - Transport packaging. Temperature-controlled transport packages for parcel shipping
- BS-ISO-22982-2 - Transport Packaging. Temperature controlled transport packages for parcel shipping
- BS-ISO-23412 - Indirect, temperature-controlled refrigerated delivery services. Land transport of parcels with intermediate transfer
- BS-ISO-28219 - Packaging. Labelling and direct product marking with linear bar code and two-dimensional symbols
- BS-ISO-28219-TC - Tracked Changes. Packaging. Labelling and direct product marking with linear bar code and two-dimensional symbols
- BS-ISO-28862 - Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
- BS-ISO-3394 - Packaging. Complete, filled transport packages and unit loads. Dimensions of rigid rectangular packages
- BS-ISO-3676 - Packaging. Complete, filled transport packages and unit loads. Unit load dimensions
- BS-ISO-6608-1 - Active and intelligent packaging
- BS-ISO-7409 - Fertilizers. Marking. Presentation and declarations
- DD-264 - Packaging. Braille and other formats for medicinal products
- EP-220 - BSI Electronic Book, Ps 9000
- PAS-7055 - Button and coin batteries. Safety requirements. Specification
- PD-CEN-13688 - Packaging. Material recycling. Report on requirements for substances and materials to prevent a sustained impediment to recycling
- PD-CEN-13695-2 - Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment
- PD-CEN-13910 - Packaging. Report on criteria and methodologies for life cycle analysis of packaging
- PD-CEN-17073 - Postal services. Interfaces for cross border parcels
- PD-CEN/CLC-17912 - Hyperloop systems. Standards Inventory and Roadmap
- PD-CR-13695-1 - Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment
- PD-ISO-17098 - Packaging material recycling. Report on substances and materials which may impede recycling
- PD-ISO-17451-2 - Packaging. Codification of contents for inventories for shipments of household goods and personal effects
- PD-ISO-18568 - Packaging and the environment. Marking for material identification
- PD-ISO-18614 - Packaging. Label material. Required information for ordering and specifying self-adhesive labels
- PD-ISO-19709-2 - Transport packaging. Small load container systems
- PD-ISO-19709-3 - Transport packaging. Small load container systems
- PD-ISO-210 - Essential oils. General rules for packaging, conditioning and storage
- PD-ISO-211 - Essential oils. General rules for labelling and marking of containers
- PD-ISO-22984 - Transport packaging. Cleaning and sanitation methods of reusable transport items for distribution purpose
- PD-ISO/IEC-GUIDE 41 - Packaging. Recommendations for addressing consumer needs
ISO:
- ISO-11156 - Packaging - Accessible design - General requirements
- ISO-11683 - Packaging -- Tactile Warnings of Danger -- Requirements
- ISO-13127 - Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems
- ISO-13274 - Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs
- ISO-14375 - Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing
- ISO-15394 - Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels
- ISO-16101 - Packaging - Transport packaging for dangerous goods - Plastics compatibility testing
- ISO-16103 - Packaging - Transport packaging for dangerous goods - Recycled plastics material
- ISO-16106 - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001
- ISO-16218 - Packaging and the environment - Processes for chemical recovery
- ISO-16495 - Packaging - Transport packaging for dangerous goods - Test methods
- ISO-16883 - Packaging - Transport packages for dangerous goods - Test methods for large packagings
- ISO-17098 - Packaging material recycling - Report on substances and materials which may impede recycling
- ISO-17350 - Direct Marking on Plastic Returnable Transport Items (RTIs)
- ISO-17351 - Packaging - Braille on packaging for medicinal products
- ISO-17363 - Supply chain applications of RFID - Freight containers
- ISO-17364 - Supply chain applications of RFID - Returnable transport items (RTIs) and returnable packaging items (RPIs)
- ISO-17365 - Supply chain applications of RFID - Transport units
- ISO-17366 - Supply chain applications of RFID - Product packaging
- ISO-17367 - Supply chain applications of RFID - Product tagging
- ISO-17370 - Application Guideline on Data Carriers for Supply Chain Management
- ISO-17451-1 - Packaging - Codification of contents for inventories for shipments of household goods and personal effects - Part 1: Numeric codification of inventories
- ISO-17451-2 - Packaging - Codification of contents for inventories for shipments of household goods and personal effects - Part 2: XML messaging structure for electronic transmission of inventory data
- ISO-17480 - Packaging - Accessible design - Ease of opening
- ISO-18568 - Packaging and the environment - Marking for material identification
- ISO-18601 - Packaging and the environment - General requirements for the use of ISO standards in the field of packaging and the environment
- ISO-18602 - Packaging and the environment - Optimization of the packaging system
- ISO-18603 - Packaging and the environment - Reuse
- ISO-18604 - Packaging and the environment - Material recycling
- ISO-18605 - Packaging and the environment - Energy recovery
- ISO-18606 - Packaging and the environment - Organic recycling
- ISO-18614 - Packaging - Label material - Required information for ordering and specifying self-adhesive labels
- ISO-19709-1 - Transport packaging - Small load container systems - Part 1: Common requirements and test methods
- ISO-19709-2 - Transport packaging - Small load container systems - Part 2: Column Stackable System (CSS)
- ISO-19709-3 - Transport packaging - Small load container systems - Part 3: Bond Stackable System (BSS)
- ISO-19809 - Packaging - Accessible design - Information and marking
- ISO-21067 - Packaging - Vocabulary
- ISO-21067-1 - Packaging - Vocabulary - Part 1: General terms
- ISO-21067-2 - Packaging - Vocabulary - Part 2: Packaging and the environment terms
- ISO-21976 - Packaging - Tamper verification features for medicinal product packaging
- ISO-22015 - Packaging - Accessible design - Handling and manipulation
- ISO-22742 - Packaging - Linear bar code and two-dimensional symbols for product packaging
- ISO-22982-1 - Transport packaging - Temperature-controlled transport packages for parcel shipping - Part 1: General requirements
- ISO-22982-2 - Transport Packaging - Temperature controlled transport packages for parcel shipping - Part 2: General specifications of testing
- ISO-22984 - Transport packaging - Cleaning and sanitation methods of reusable transport items for distribution purpose
- ISO-23412 - Indirect, temperature-controlled refrigerated delivery services - Land transport of parcels with intermediate transfer
- ISO-23667 - Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing
- ISO-28219 - Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbols
- ISO-28862 - Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
- ISO-3394 - Packaging - Complete, filled transport packages and unit loads - Dimensions of rigid rectangular packages
- ISO-3676 - Packaging - Complete, filled transport packages and unit loads - Unit load dimensions
- ISO-6608-1 - Active and intelligent packaging - Part 1: General requirements and specifications of active packaging
- ISO-780 - Packaging - Distribution packaging - Graphical symbols for handling and storage of packages
- ISO-8317 - Child-resistant packaging - Requirements and testing procedures for reclosable packages
- ISO-GUIDE 41 - Packaging - Recommendations for addressing consumer needs
Other SDOs:
- DIN-EN-13010 - Packaging - Unit Packaging, Dimensions & Requirements for Pegboard Display, English Ve
- DIN-EN-13427 - Packaging, Requirements for the Use of European Standards in the Field of Packaging &
- DIN-EN-13428 - Packaging - Requirements Specific To Manufacturing & Composition, Prevention by Source
- DIN-EN-13429 - Packaging, Reuse
- DIN-EN-13430 - Packaging, Requirements for Packaging Recoverable by Material Recycling
- DIN-EN-13431 - Packaging, Requirements for Packaging Recoverable in the Form of Energy Recovery, Incl
- DIN-EN-14375 - Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing; German version EN 14375:2016
- DIN-EN-862 - Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
- DIN-EN-ISO-16103 - Packaging, Transport Packaging for Danergous Goods, Recycled Plastics Material
- DIN-EN-ISO-16104 - Packaging - Transport packaging for dangerous goods - Tests methods (ISO 16104:2003)
- DIN-EN-ISO-16495 - Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2013)
- DIN-EN-ISO-8317 - Child-resistant packaging - Requirements and testing procedures for reclosable packages
- DS-ISO-17365 - Supply chain applications of RFID - Transport units
- DS-ISO-17366 - Supply chain applications of RFID - Product packaging
- DS-ISO-17367 - Supply chain applications of RFID - Product tagging
- EN-13427 - Packaging - Requirements for the Use of European Standards in the Field of Packaging &
- EN-13428 - Packaging - Requirements Specific To Manufacturing & Composition, Prevention by Source
- EN-13430 - Packaging - Requirements for Packaging Recoverable by Material Recycling
- EN-13431 - Packaging - Requirements for Packaging Recoverable in the Form of Energy Recovery, Inc
- EN-14375 - Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing
- EN-15823 - Packaging - Braille on Packaging for Medicinal Products
- EN-16247-4 - Energy audits - Part 4: Transport
- EN-16679 - Packaging - Tamper verification features for medicinal product packaging
- EN-415-7 - Part 7: Group & Secondary Packaging Machines, Safety of Packaging Machines
- EN-862 - Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
- EN-ISO-11683 - Packaging, Tactile Warnings of Danger, Requirements
- EN-ISO-13127 - Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems (ISO 13127:2012)
- EN-ISO-13274 - Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013)
- EN-ISO-16101 - Packaging, Transport Packaging for Dangerous Goods, Plastics Compatibility Testing
- EN-ISO-16103 - Packaging, Transport Packaging for Dangerous Goods, Recycled Plastics Material
- EN-ISO-16106 - Packaging - Transport Packages for Dangerous Goods - Dangerous Goods Packagings, Inter
- EN-ISO-16495 - Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2013)
- EN-ISO-17351 - Packaging - Braille on packaging for medicinal products
- EN-ISO-17480 - Packaging - Accessible design - Ease of opening
- EN-ISO-23667 - Packaging, Transport Packaging for Dangerous Goods, Rigid Plastics & Plastics Composit
- EN-ISO-780 - Packaging - Distribution packaging - Graphical symbols for handling and storage of packages
- EN-ISO-8317 - Child-resistant packaging - Requirements and testing procedures for reclosable packages
- ISTA-1A - Non-Simulation Integrity Performance Tests, Packaged-Products weighing 150 lb (68 kg) or Less
- ISTA-1B - Non-Simulation Integrity Performance Tests, Packaged-Products weighing Over 150 lb (68 kg)
- ISTA-1C - Non-Simulation Integrity Performance Tests, Extended Testing for Individual Packaged-Products weighing 150 lb (68 kg) or Less
- ISTA-1D - Non-Simulation Integrity Performance Tests, Extended Testing for Individual Packaged-Products weighing Over 150 lb (68 kg)
- ISTA-1E - Non-Simulation Integrity Performance Tests, Unitized Loads
- ISTA-1G - Non-Simulation Integrity Performance Tests, Packaged-Products weighing 150 lb (68 kg) or Less (Random Vibration)
- ISTA-1H - Non-Simulation Integrity Performance Tests, Packaged-Products weighing Over 150 lb (68 kg) (Random Vibration)
- ISTA-2A - Performance Tests for Packaged-Products, Packaged-Products 150 lb (68 kg) or Less
- ISTA-2B - Partial Simulation Performance Tests, Packaged-Products weighing over 150 lb (68 kg)
- ISTA-2C - Partial Simulation Performance Tests, Furniture Packages
- ISTA-2D - Partial Simulation Performance Tests, Packaged-Products Considered Flat
- ISTA-2E - Partial Simulation Performance Tests, Packaged-Products Considered Elongated
- ISTA-3A - Packaged-Products for Parcel Delivery System Shipment 70 kg (150 lb) or Less
- ISTA-3B - Packaged-Products for Less-Than-Truckload (LTL) Shipment
- ISTA-3E - General Simulation Performance Tests, Unitized Loads of Same Product
- ISTA-3F - General Simulation Performance Tests, Packaged Products for Distribution Center to Retail Outlet Shipment 100 lb (45 kg)
- ISTA-3H - General Simulation Performance Tests, Performance Test for Products or Packaged-Products in Mechanically Handled Bulk Transport Containers
- ISTA-3K - Fast Moving Consumer Goods in the European Retail Supply Chain
- ISTA-7D - Development Tests, Temperature Test for Transport Packaging
- ISTA-7E - Development Tests, Testing Standard for Thermal Transport Packaging Used in Parcel Delivery System Shipment
- ISTA-GUIDELINES FOR - Guidelines for Selecting & Using ISTA Test Procedures & Projects
- JIS-C-5070 - Surface mounting technology -- Part 2: Transportation and storage conditions of surface mounting devices (SMD) -- Application guide
- JIS-S-0025 - Guidelines for older persons and persons with disabilities -- Packaging and receptacles -- Tactile warnings of danger -- Requirements
- JIS-S-2061 - The details of information to communicate regarding confirmation of synthetic resin safety of utensils, containers and packaging for food
- SIS-75010 - Marking of cargo. Shipping marks
- SIS-CEN-13695-2 - Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment
- SIS-CEN/CLC/TR-17912 - Hyperloop systems - Standards Inventory and Roadmap
- SIS-CEN/TR-13688 - Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling
- SIS-CEN/TR-13695-2 - Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment
- SIS-CEN/TR-13910 - Packaging - Report on criteria and methodologies for life cycle analysis of packaging
- SIS-CEN/TR-14310 - Freight transportation services - Declaration and reporting of environmental performance in freight transport chains
- SIS-CEN/TR-14520 - Packaging - Reuse - Methods for assessing the performance of a reuse system
- SIS-CEN/TR-15753 - Packaging - Package leaflets for medicinal products - Braille and other formats for visually impaired people
- SIS-CEN/TS-15945 - Packaging - Ease of opening - Criteria and test methods for evaluating consumer packaging
- SIS-CEN/TS-17073 - Postal services - Interfaces for cross border parcels
- SIS-ISO/TR-17350 - Direct Marking on Plastic Returnable Transport Items (RTIs)
- SIS-ISO/TR-17370 - Application Guideline on Data Carriers for Supply Chain Management
- SIS-ISO/TS-18614 - Packaging - Label material - Required information for ordering and specifying self-adhesive labels
- SS-232718 - Transportation packages of sawn and planed timber- Unit loads
- SS-75011 - Packaging - Pictorial markings for handling of goods
- SS-75012 - Packaging - Symbols for opening methods
- SS-75018 - Packaging - Marking of retail packages/transport packages for consumer goods
- SS-840205 - Complete, filled transport packages - Distribution trials - Information to be recorded
- SS-847000 - Packaging - Unit load sizes - Dimensions
- SS-847002 - Module coordinating - Distribution of consumer goods - Guidelines
- SS-847002-1 - Packaging - Dimensional coordination - Part 1: Principles
- SS-847002-2 - Packaging - Dimensional coordination - Part 2: Terminology
- SS-847002-3 - Packaging - Dimensional coordination - Part 3: Rules and dimensions
- SS-847004 - Dimensions of rigid rectangular packages - Transport packages
- SS-847005 - Transport packages - Module packages
- SS-847009 - Pin pack - Packages for wall exposures
- SS-EN-12374 - Packaging - Flexible tubes - Terminology
- SS-EN-12375 - Packaging - Flexible aluminium tubes - Wall thickness determination method
- SS-EN-12707 - Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l
- SS-EN-12714 - Plastic drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L
- SS-EN-13011 - Transportation Services - Good transport chains - System for declaration of performance conditions
- SS-EN-13029 - Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures
- SS-EN-13045 - Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
- SS-EN-13048 - Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method
- SS-EN-13193 - Packaging - Packaging and the environment - Terminology
- SS-EN-13427 - Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste
- SS-EN-13428 - Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction
- SS-EN-13429 - Packaging - Reuse
- SS-EN-13430 - Packaging - Requirements for packaging recoverable by material recycling
- SS-EN-13431 - Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
- SS-EN-13432 - Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging
- SS-EN-13439 - Packaging - Rate of energy recovery - Definition and method of calculation
- SS-EN-13461 - Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances
- SS-EN-13698-2 - Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets
- SS-EN-13876 - Transport - Logistics and Services - Goods transport chains - Code of practice for the provision of cargo transport services
- SS-EN-14047 - Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
- SS-EN-14048 - Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
- SS-EN-14182 - Packaging - Terminology - Basic terms and definitions
- SS-EN-14375 - Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing
- SS-EN-14634 - Glass packaging - 26 H 180 crown finish - Dimensions
- SS-EN-14635 - Glass packaging - 26 H 126 crown finish - Dimensions
- SS-EN-15384 - Packaging - Flexible aluminium tubes - Test method to determine the porosity of the internal coating
- SS-EN-15384-1 - Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test
- SS-EN-15384-2 - Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test
- SS-EN-15386 - Packaging - Flexible laminate and plastic tubes - Test method to determine the print adhesion
- SS-EN-15387 - Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam
- SS-EN-15421 - Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering
- SS-EN-15433-1 - Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 1: General requirements
- SS-EN-15433-2 - Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 2: Data acquisition and general requirements for measuring equipment
- SS-EN-15433-3 - Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 3: Data validity check and data editing for evaluation
- SS-EN-15433-4 - Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation
- SS-EN-15433-5 - Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 5: Derivation of Test Specifications
- SS-EN-15433-6 - Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports
- SS-EN-15507 - Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
- SS-EN-15543 - Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
- SS-EN-15593 - Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements
- SS-EN-15653 - Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia
- SS-EN-15766 - Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone
- SS-EN-15823 - Packaging - Braille on packaging for medicinal products
- SS-EN-15904 - Glass packaging - Standard tolerances for flaconnage
- SS-EN-16063 - Packaging - Rigid plastic containers - Nomenclature of plastic finishes
- SS-EN-16064 - Packaging - Rigid plastic containers - PET finish 30/25 High (18,5)
- SS-EN-16065 - Packaging - Rigid plastic containers - PET finish 30/25 Low (16,8)
- SS-EN-16066 - Packaging - Rigid plastic containers - PET finish 26,7 (lead 6,35)
- SS-EN-16067 - Packaging - Rigid plastic containers - PET finish 26,7 (lead 9,00)
- SS-EN-16068 - Packaging - Rigid plastic containers - PET finish 38
- SS-EN-16247-4 - Energy audits - Part 4: Transport
- SS-EN-16247-5 - Energy audits - Part 5: Competence of energy auditors
- SS-EN-16283 - Packaging - Flexible aluminium tubes - Test method to measure the force to pierce the membrane
- SS-EN-16284 - Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
- SS-EN-16285 - Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)
- SS-EN-16291-2 - Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
- SS-EN-16679 - Packaging - Tamper verification features for medicinal product packaging
- SS-EN-1895 - Adhesives for paper and board, packaging and disposable sanitary products - 180° - "T" peel test for a flexible-to-flexible assembly
- SS-EN-1929-1 - Basket trolleys - Part 1: Requirements and tests for basket trolleys with or without a child carrying facility
- SS-EN-20780 - Packaging - Pictorial marking for handling of goods
- SS-EN-22206 - Packaging - Complete, filled transport packages -Identification of parts when testing (ISO 2206:1987)
- SS-EN-22233 - Packaging - Complete, filled transport packages -Conditioning for testing (ISO 2233:1986)
- SS-EN-22234 - Packaging - Complete, filled transport packages -Stacking tests using static load (ISO 2234:1985)
- SS-EN-22244 - Packaging - Complete, filled transport packages -Horizontal impact tests (horizontal or inclined plane test; Pendulum test) (ISO 2244:1985)
- SS-EN-22247 - Packaging - Complete, filled transport packages -Vibration test at fixed low frequency (ISO 2247:1985)
- SS-EN-22248 - Packaging - Complete, filled transport packages -Vertical impact test by dropping (ISO 2248:1985)
- SS-EN-22872 - Packaging - Complete, filled transport packages -Compression test (ISO 2872:1985)
- SS-EN-22873 - Packaging - Complete, filled transport packages -Low pressure test (ISO 2873:1985)
- SS-EN-22874 - Packaging - Complete, filled transport packages -Stacking test using compression tester (ISO 2874:1985)
- SS-EN-22875 - Packaging - Complete, filled transport packages -Water spray test (ISO 2875:1985)
- SS-EN-22876 - Packaging - Complete, filled transport packages -Rolling test (ISO 2876:1985)
- SS-EN-24178 - Complete, filled transport packages - Distribution trials - Information to be recorded (ISO 4178:1980)
- SS-EN-24180-1 - Complete, filled transport packages - General rules for the compilation of performance test schedules - Part 1: General principles (ISO 4180-1:1980)
- SS-EN-24180-2 - Complete, filled transport packages - General rules for the compilation of performance test schedules - Part 2: Quantitative data (ISO 4180-2:1980)
- SS-EN-28317 - Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:1989)
- SS-EN-28318 - Packaging - Complete, filled transport packages -Vibration tests using a sinusoidal variable frequency (ISO 8318:1986)
- SS-EN-28474 - Packaging - Complete, filled transport packages -Water immersion test (ISO 8474:1986)
- SS-EN-28768 - Packaging - Complete, filled transport packages -Toppling test (ISO 8768:1987)
- SS-EN-415-3 - Safety of packaging machines - Part 3: Form, fill and seal machines; fill and seal machines
- SS-EN-415-7 - Safety of packaging machines - Part 7: Group and secondary packaging machines
- SS-EN-862 - Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products
- SS-EN-ISO-11073-10418 - Health informatics - Personal health device communication - Part 10418: Device specialization - International Normalized Ratio (INR) monitor (ISO/IEEE 11073-10418:2014)
- SS-EN-ISO-11683 - Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997)
- SS-EN-ISO-12048 - Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994)
- SS-EN-ISO-12818 - Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
- SS-EN-ISO-12821 - Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019)
- SS-EN-ISO-13127 - Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems (ISO 13127:2012)
- SS-EN-ISO-13274 - Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013)
- SS-EN-ISO-13688-AM1 - Protective clothing - General requirements - Amendment 1 (ISO 13688:2013/Amd 1:2021)
- SS-EN-ISO-14375 - Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing (ISO 14375:2018)
- SS-EN-ISO-15750-1 - Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l (ISO 15750-1:2002)
- SS-EN-ISO-15750-2 - Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l (ISO 15750-2:2002)
- SS-EN-ISO-15750-3 - Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2022)
- SS-EN-ISO-16101 - Packaging - Transport packaging for dangerous goods - Plastics compatibility testing (ISO 16101:2004)
- SS-EN-ISO-16103 - Packaging - Transport packages for dangerous goods - Recycled plastics material (ISO 16103:2005)
- SS-EN-ISO-16104 - Packaging - Transport packaging for dangerous goods - Test methods (ISO 16104:2003)
- SS-EN-ISO-16106 - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2020)
- SS-EN-ISO-16495 - Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2022)
- SS-EN-ISO-17351 - Packaging - Braille on packaging for medicinal products (ISO 17351:2013)
- SS-EN-ISO-17480 - Packaging - Accessible design - Ease of opening (ISO 17480:2015)
- SS-EN-ISO-20848-1 - Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-1:2006)
- SS-EN-ISO-20848-2 - Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l (ISO 20848-2:2006)
- SS-EN-ISO-20848-3 - Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2018)
- SS-EN-ISO-21976 - Packaging - Tamper verification features for medicinal product packaging (ISO 21976:2018)
- SS-EN-ISO-23667 - Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composites IBCs - Compatibility testing (ISO 23667:2007)
- SS-EN-ISO-28862 - Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products (ISO 28862:2018)
- SS-EN-ISO-4180 - Packaging - Complete, filled transport packages - General rules for the compilation of performance test schedules (ISO 4180:2019)
- SS-EN-ISO-445 - Pallets for materials handling - Vocabulary (ISO 445:2013)
- SS-EN-ISO-780 - Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015)
- SS-EN-ISO-8317 - Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2003)
- SS-EN-ISO-8611-2 - Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests (ISO 8611-2:2021)
- SS-EN-ISO-8611-2-AM1 - Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests (ISO 8611-2:2011/Amd 1:2016)
- SS-ISO-11156 - Packaging - Accessible design - General requirements (ISO 11156:2011, IDT)
- SS-ISO-1436 - Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification (ISO 1436:2020, IDT)
- SS-ISO-15394 - Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels (ISO 15394:2009, IDT)
- SS-ISO-16883 - Packaging - Transport packages for dangerous goods - Test methods for large packagings (ISO 16883:2007, IDT)
- SS-ISO-17351 - Packaging Braille on packaging for medicinal products (ISO 17351, IDT)
- SS-ISO-17363 - Supply chain applications of RFID - Freight containers (ISO 17363:2013, IDT)
- SS-ISO-17364 - Supply chain applications of RFID - Returnable transport items (RTIs) and returnable packaging items (RPIs) (ISO 17364:2013, IDT)
- SS-ISO-17365 - Supply chain applications of RFID - Transport units (ISO 17365:2013, IDT)
- SS-ISO-17366 - Supply chain applications of RFID - Product packaging (ISO 17366:2013, IDT)
- SS-ISO-17367 - Supply chain applications of RFID - Product tagging (ISO 17367:2013, IDT)
- SS-ISO-17480 - Packaging - Accessible design - Ease of opening (ISO 17480:2015, IDT)
- SS-ISO-19809 - Packaging - Accessible design - Information and marking (ISO 19809:2017, IDT)
- SS-ISO-21067 - Packaging - Vocabulary (ISO 21067:2007, IDT)
- SS-ISO-2206 - Packaging - Complete, filled transport packages -Identification of parts when testing
- SS-ISO-2233 - Packaging - Complete, filled transport packages -Conditioning for testing
- SS-ISO-2234 - Packaging - Complete, filled transport packages -Stacking tests using static load
- SS-ISO-2244 - Packaging - Complete, filled transport packages -Horizontal impact tests (horizontal or inclined plane test; pendulum test)
- SS-ISO-2247 - Packaging - Complete, filled transport packages -Vibration test at fixed low frequency
- SS-ISO-2248 - Packaging - Complete, filled transport packages -Vertical impact test by dropping
- SS-ISO-22742 - Packaging - Linear bar code and two-dimensional symbols for product packaging (ISO 22742:2010, IDT)
- SS-ISO-28219 - Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbols (ISO 28219:2009, IDT)
- SS-ISO-2872 - Packaging - Complete, filled transport packages -Compression test
- SS-ISO-2873 - Packaging - Complete, filled transport packages -Low pressure test
- SS-ISO-2874 - Packaging - Complete, filled transport packages -Stacking test using compression tester
- SS-ISO-2875 - Packaging - Complete, filled transport packages -Water spray test
- SS-ISO-2876 - Packaging - Complete, filled transport packages -Rolling test
- SS-ISO-28862 - Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products (ISO 28862:2018, IDT)
- SS-ISO-3394 - Packaging - Complete, filled transport packages and unit loads - Dimensions of rigid rectangular packages (ISO 3394:2012, IDT)
- SS-ISO-3676 - Packaging - Complete, filled transport packages and unit loads - Unit load dimensions (ISO 3676:2012, IDT)
- SS-ISO-4180 - Packaging - Complete, filled transport packages - General rules for the compilation of performance test schedules (ISO 4180:2009, IDT)
- SS-ISO-8317 - Child-resistant packaging - Requirements and testing procedures for reclosable packages
- SS-ISO-8318 - Packaging - Complete, filled transport packages -Vibration tests using a sinusoidal variable frequency
- SS-ISO-8474 - Packaging - Complete, filled transport packages -Water immersion test
- SS-ISO-8611-2 - Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests (ISO 8611-2:2011, IDT)
- SS-ISO-8611-3 - Pallets for materials handling - Flat pallets - Part 3: Maximum working loads (ISO 8611-3:2011, IDT)
- SS-ISO-8768 - Packaging - Complete, filled transport packages -Toppling test
- SS-ISO-9058 - Glass containers - Standard tolerances for bottles (ISO 9058:2008, IDT)
- STG-TR-109 - Krav för mätning och kontroll av tungmetaller och andra farliga substanser i förpackningar samt deras utsläpp till miljön - Del 1: Krav för mätning och kontroll för de fyra tungmetaller som är aktuella i förpackningar (CEN/CR 13695-1:2000)
- UNE-EN-ISO-8317 - Child-resistant packaging - Requirements and testing procedures for reclosable packages