06.02: Paint -- Products and Applications; Protective Coatings; Pipeline Coatings
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C1486 - Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
- ASTM-C267 - Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
- ASTM-C307 - Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
- ASTM-C308 - Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
- ASTM-C413 - Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
- ASTM-C531 - Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
- ASTM-C579 - Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
- ASTM-C580 - Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
- ASTM-C722 - Standard Specification for Chemical-Resistant Monolithic Floor Surfacings
- ASTM-C868 - Standard Test Method for Chemical Resistance of Protective Linings (Withdrawn 2015)
- ASTM-C904 - Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
- ASTM-D1155 - Standard Test Method for Roundness of Glass Spheres
- ASTM-D1211 - Standard Test Method for Temperature-Change Resistance of Clear Nitrocellulose Lacquer Films Applied to Wood (Withdrawn 2006)
- ASTM-D1213 - Test Method for Crushing Resistance of Glass Spheres (Intent to Withdraw) (Withdrawn 1983)
- ASTM-D1214 - Standard Test Method for Sieve Analysis of Glass Spheres
- ASTM-D1308 - Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Coating Systems
- ASTM-D1309 - Standard Test Method for Settling Properties of Traffic Paints During Storage (Withdrawn 2020)
- ASTM-D1316 - Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
- ASTM-D1546 - Standard Practice for Testing the Performance of Clear Floor Sealers (Withdrawn 2008)
- ASTM-D1641 - Standard Practice for Conducting Outdoor Exposure Tests of Varnishes (Withdrawn 2013)
- ASTM-D1734 - Standard Practice for Making Cementitious Panels for Testing Coatings
- ASTM-D1736 - Test Method for Efflorescence of Interior Wall Paints (Withdrawn 1997)
- ASTM-D1848 - Standard Classification for Reporting Paint Film Failures Characteristic of Exterior Latex Paints (Withdrawn 2003)
- ASTM-D1849 - Standard Test Method for Package Stability of Paint
- ASTM-D2064 - Standard Test Method for Print Resistance of Architectural Paints
- ASTM-D2065 - Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
- ASTM-D2066 - Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
- ASTM-D2067 - Standard Test Method for Coarse Particles in Printing Ink Dispersions
- ASTM-D2091 - Standard Test Method for Print Resistance of Lacquers
- ASTM-D2092 - Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting (Withdrawn 2008)
- ASTM-D2198 - Standard Test Method for Stain Removal From Multicolor Lacquers (Withdrawn 2003)
- ASTM-D2199 - Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers
- ASTM-D2200 - Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces
- ASTM-D2205 - Standard Guide for Selection of Tests for Traffic Paints
- ASTM-D2243 - Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
- ASTM-D2336 - Standard Guide for Specifying Factory Applied Wood Coatings (Withdrawn 2008)
- ASTM-D2338 - Standard Test Method for Determining Particle Size of Multicolor Lacquers (Withdrawn 2020)
- ASTM-D2486 - Standard Test Methods for Scrub Resistance of Wall Paints
- ASTM-D2571 - Standard Guide for Testing Wood Furniture Lacquers (Withdrawn 2003)
- ASTM-D2620 - Standard Test Method for Light Stability of Clear Coatings (Withdrawn 2001)
- ASTM-D2742 - Methods for Chemical Analysis of Tribasic Lead Phosphosilicate (Withdrawn 1988)
- ASTM-D2743 - Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography (Withdrawn 2015)
- ASTM-D2792 - Standard Practice for Solvent and Fuel Resistance of Traffic Paint
- ASTM-D2793 - Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
- ASTM-D2830 - Standard Test Method for Exterior Durability of Factory-Primed Field Finished Wood Products (Withdrawn 2004)
- ASTM-D2921 - Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
- ASTM-D2967 - Standard Test Method for Corner Coverage of Powder Coatings
- ASTM-D3002 - Standard Guide for Evaluation of Coatings Applied to Plastics (Withdrawn 2016)
- ASTM-D3003 - Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
- ASTM-D3023 - Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
- ASTM-D3129 - Guide for Testing Exterior Latex House Paints (Withdrawn 1996)
- ASTM-D3133 - Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry (Withdrawn 2008)
- ASTM-D3170 - Standard Test Method for Chipping Resistance of Coatings
- ASTM-D3214 - Standard Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation (Withdrawn 2002)
- ASTM-D3258 - Standard Test Method for Porosity of White or Near White Paint Films by Staining
- ASTM-D3259 - Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle (Withdrawn 2009)
- ASTM-D3260 - Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
- ASTM-D3276 - Standard Guide for Painting Inspectors (Metal Substrates)
- ASTM-D3322 - Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
- ASTM-D333 - Standard Guide for Clear and Pigmented Lacquers
- ASTM-D3358 - Guide for Testing Water-Borne Floor Paints (Withdrawn 1994)
- ASTM-D3424 - Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter (Withdrawn 2020)
- ASTM-D3450 - Standard Test Method for Washability Properties of Interior Architectural Coatings
- ASTM-D3451 - Standard Guide for Testing Coating Powders and Powder Coatings
- ASTM-D3459 - Standard Test Method for Humid-Dry Cycling for Coatings on Wood and Wood Products (Withdrawn 2007)
- ASTM-D358 - Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings (Withdrawn 2014)
- ASTM-D3623 - Standard Test Method for Testing Antifouling Panels in Shallow Submergence
- ASTM-D365 - Standard Guide for Soluble Nitrocellulose Base Solutions
- ASTM-D3719 - Standard Test Method for Quantifying Dirt Collection on Coated Exterior Panels (Withdrawn 2009)
- ASTM-D3730 - Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
- ASTM-D3732 - Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM-D3793 - Standard Test Method for Low-Temperature Coalescence of Latex Paint Films by Porosity Measurement (Withdrawn 2012)
- ASTM-D3794 - Standard Guide for Testing Coil Coatings
- ASTM-D3843 - Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
- ASTM-D3911 - Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
- ASTM-D3912 - Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
- ASTM-D3927 - Guide for State and Institutional Purchasing of Paint (Withdrawn 1991)
- ASTM-D3928 - Standard Test Method for Evaluation of Gloss or Sheen Uniformity
- ASTM-D4040 - Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
- ASTM-D4062 - Standard Test Method for Leveling of Paints by Draw-Down Method
- ASTM-D4082 - Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants
- ASTM-D4144 - Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing (Withdrawn 2019)
- ASTM-D4145 - Standard Test Method for Coating Flexibility of Prepainted Sheet
- ASTM-D4146 - Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
- ASTM-D4147 - Standard Practice for Applying Coil Coatings Using Wire-Wound Drawdown Bars
- ASTM-D4213 - Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
- ASTM-D4217 - Standard Test Method for Gel Time of Thermosetting Coating Powder
- ASTM-D4227 - Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
- ASTM-D4228 - Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
- ASTM-D4236 - Standard Practice for Labeling Art Materials for Chronic Health Hazards
- ASTM-D4242 - Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
- ASTM-D4256 - Test Method for Determination of the Decontaminability of Coatins Used in Light-Water Nuclear Power Plants (Withdrawn 1995)
- ASTM-D4258 - Standard Practice for Surface Cleaning Concrete for Coating
- ASTM-D4259 - Standard Practice for Preparation of Concrete by Abrasion Prior to Coating Application
- ASTM-D4260 - Standard Practice for Liquid and Gelled Acid Etching of Concrete
- ASTM-D4261 - Standard Practice for Surface Cleaning Concrete Masonry Units for Coating
- ASTM-D4262 - Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
- ASTM-D4263 - Standard Practice for Indicating Moisture in Concrete by the Plastic Sheet Method
- ASTM-D4285 - Standard Practice for Indicating Oil or Water in Compressed Air
- ASTM-D4286 - Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities
- ASTM-D4302 - Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints
- ASTM-D4303 - Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
- ASTM-D4361 - Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter (Withdrawn 2019)
- ASTM-D4400 - Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
- ASTM-D4417 - Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
- ASTM-D4446 - Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments (Withdrawn 2022)
- ASTM-D4537 - Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
- ASTM-D4538 - Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
- ASTM-D4540 - Guide for Testing Interior Latex Semigloss and Glass Paints (Withdrawn 1996)
- ASTM-D4541 - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
- ASTM-D4618 - Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
- ASTM-D4619 - Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
- ASTM-D4707 - Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
- ASTM-D4712 - Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014)
- ASTM-D4713 - Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
- ASTM-D4752 - Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
- ASTM-D4787 - Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
- ASTM-D4796 - Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
- ASTM-D4797 - Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
- ASTM-D4828 - Standard Test Methods for Practical Washability of Organic Coatings
- ASTM-D4838 - Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints (Withdrawn 2023)
- ASTM-D4938 - Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water (Withdrawn 2022)
- ASTM-D4939 - Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
- ASTM-D4940 - Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives
- ASTM-D4941 - Standard Practice for Preparing Drawdowns of Artists’ Paste Paints
- ASTM-D4942 - Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
- ASTM-D4946 - Standard Test Method for Blocking Resistance of Architectural Paints
- ASTM-D4958 - Standard Test Method for Comparison of the Brush Drag of Latex Paints
- ASTM-D4960 - Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials
- ASTM-D5007 - Standard Test Method for Wet-to-Dry Hiding Change
- ASTM-D5009 - Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
- ASTM-D5010 - Standard Guide for Testing Printing Inks and Related Materials (Withdrawn 2017)
- ASTM-D5043 - Standard Practice for Field Identification of Coatings (Withdrawn 2018)
- ASTM-D5063 - Standard Guide for Use of Certification of Coating Conformance Form (Withdrawn 2021)
- ASTM-D5064 - Standard Practice for Conducting a Patch Test to Assess Coating Compatibility
- ASTM-D5065 - Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
- ASTM-D5066 - Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis
- ASTM-D5067 - Standard Specification for Artists' Watercolor Paints
- ASTM-D5068 - Standard Practice for Preparation of Paint Brushes for Evaluation
- ASTM-D5069 - Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings
- ASTM-D5095 - Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
- ASTM-D5098 - Standard Specification for Artists' Acrylic Dispersion Paints
- ASTM-D5107 - Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
- ASTM-D5108 - Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water (Withdrawn 2016)
- ASTM-D5139 - Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
- ASTM-D5144 - Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
- ASTM-D5146 - Standard Guide to Testing Solvent-Borne Architectural Coatings
- ASTM-D5150 - Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
- ASTM-D5161 - Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates) (Withdrawn 2013)
- ASTM-D5162 - Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
- ASTM-D5163 - Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
- ASTM-D5181 - Standard Practice for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
- ASTM-D5235 - Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
- ASTM-D5286 - Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
- ASTM-D5301 - Standard Practice for Physical Characterization of Paint Brushes
- ASTM-D5324 - Standard Guide for Testing Water-Borne Architectural Coatings
- ASTM-D5326 - Standard Test Method for Color Development in Tinted Latex Paints
- ASTM-D5327 - Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
- ASTM-D5328 - Standard Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001)
- ASTM-D5367 - Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted
- ASTM-D5382 - Standard Guide to Evaluation of Optical Properties of Powder Coatings
- ASTM-D5383 - Standard Practice for Visual Determination of the Lightfastness of Art Materials by Artists and Art Technologists
- ASTM-D5398 - Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User (Withdrawn 2019)
- ASTM-D5401 - Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood
- ASTM-D5402 - Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
- ASTM-D5403 - Standard Test Methods for Volatile Content of Radiation Curable Materials
- ASTM-D5479 - Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed
- ASTM-D5498 - Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
- ASTM-D5499 - Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems
- ASTM-D5517 - Standard Test Method for Determining Extractability of Metals from Art Materials
- ASTM-D5618 - Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear (Withdrawn 2020)
- ASTM-D5702 - Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- ASTM-D5703 - Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry
- ASTM-D5722 - Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
- ASTM-D5723 - Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- ASTM-D5724 - Standard Specification for Gouache Paints
- ASTM-D5795 - Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus
- ASTM-D5796 - Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device
- ASTM-D5860 - Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
- ASTM-D5861 - Standard Guide for Significance of Particle Size Measurements of Coating Powders
- ASTM-D5909 - Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
- ASTM-D5913 - Standard Test Method for Evaluation of Cleanability of Paint Brushes
- ASTM-D5959 - Standard Test Method for Bulk Density of Level Paintbrush Filaments
- ASTM-D5962 - Standard Guide for Maintaining Unqualified Coatings (Paints) Within Level I Areas of a Nuclear Power Facility (Withdrawn 2008)
- ASTM-D5965 - Standard Test Methods for Density of Coating Powders
- ASTM-D6073 - Standard Test Method for Relative Setting of Heatset Printing Inks
- ASTM-D6137 - Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems
- ASTM-D6189 - Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
- ASTM-D6190 - Standard Test Method for Cathodic Disbonding of Pipeline Coatings by Laboratory Simulation of Soil Burial (Withdrawn 2001)
- ASTM-D6206 - Standard Practice for Sampling of Coating Films
- ASTM-D6237 - Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
- ASTM-D6279 - Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
- ASTM-D6337 - Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics
- ASTM-D6386 - Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
- ASTM-D6419 - Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
- ASTM-D6441 - Standard Test Methods for Measuring the Hiding Power of Powder Coatings
- ASTM-D6442 - Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
- ASTM-D6486 - Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
- ASTM-D6487 - Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press
- ASTM-D6488 - Standard Terminology Relating to Print Problems
- ASTM-D6489 - Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
- ASTM-D6490 - Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
- ASTM-D6491 - Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
- ASTM-D6492 - Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
- ASTM-D6531 - Standard Practice for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
- ASTM-D6532 - Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
- ASTM-D6577 - Standard Guide for Testing Industrial Protective Coatings
- ASTM-D6578 - Standard Practice for Determination of Graffiti Resistance
- ASTM-D6583 - Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
- ASTM-D6632 - Standard Test Method for Total Copper in Antifouling Paints (Withdrawn 2010)
- ASTM-D6665 - Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
- ASTM-D6676 - Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating
- ASTM-D6677 - Standard Test Method for Evaluating Adhesion by Knife
- ASTM-D6686 - Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
- ASTM-D6688 - Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique
- ASTM-D6736 - Standard Test Method for Burnish Resistance of Latex Paints
- ASTM-D6737 - Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
- ASTM-D6763 - Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
- ASTM-D6801 - Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials
- ASTM-D6846 - Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
- ASTM-D6900 - Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
- ASTM-D6901 - Standard Specification for Artists' Colored Pencils
- ASTM-D6903 - Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
- ASTM-D6904 - Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
- ASTM-D6906 - Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
- ASTM-D6943 - Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings
- ASTM-D6944 - Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
- ASTM-D6957 - Standard Practice for Measuring Curl in Paint Brush Filling Material
- ASTM-D6990 - Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems
- ASTM-D7054 - Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
- ASTM-D7055 - Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
- ASTM-D7072 - Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
- ASTM-D7073 - Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
- ASTM-D7088 - Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
- ASTM-D7089 - Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
- ASTM-D7093 - Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
- ASTM-D7108 - Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
- ASTM-D711 - Standard Test Method for No-Pick-Up Time of Traffic Paint
- ASTM-D7127 - Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument (Withdrawn 2021)
- ASTM-D713 - Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
- ASTM-D7163 - Standard Test Method for Specular Gloss of Printed Matter (Withdrawn 2020)
- ASTM-D7167 - Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
- ASTM-D7188 - Standard Terminology for Printing Inks, Materials, and Processes
- ASTM-D7189 - Standard Test Method for Relative Mileage of News Ink on Newsprint
- ASTM-D7190 - Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
- ASTM-D7230 - Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates
- ASTM-D7233 - Standard Test Method for Testing Fracture of Level Paintbrush Filaments
- ASTM-D7234 - Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
- ASTM-D7244 - Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings
- ASTM-D7270 - Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings
- ASTM-D7305 - Standard Test Method for Reflection Density of Printed Matter
- ASTM-D7306 - Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation
- ASTM-D7307 - Standard Practice for Sampling of Thermoplastic Pavement Marking Materials
- ASTM-D7308 - Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
- ASTM-D7354 - Standard Guide for Artists’ Paint Waste Disposal in Private, Non-Commercial Settings
- ASTM-D7355 - Standard Guide for Artists' Paint Waste Disposal in Smaller Commercial or Educational Settings (Withdrawn 2019)
- ASTM-D7376 - Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
- ASTM-D7377 - Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet
- ASTM-D7378 - Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
- ASTM-D7393 - Standard Practice for Indicating Oil in Abrasives
- ASTM-D7396 - Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
- ASTM-D7488 - Standard Test Method for Open Time of Latex Paints
- ASTM-D7489 - Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
- ASTM-D7491 - Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants
- ASTM-D7514 - Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
- ASTM-D7538 - Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
- ASTM-D7539 - Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
- ASTM-D7602 - Standard Practice for Installation of Vulcanized Rubber Linings
- ASTM-D7639 - Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
- ASTM-D7680 - Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
- ASTM-D7681 - Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
- ASTM-D7682 - Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
- ASTM-D7733 - Standard Specification for Acrylic Dispersion Ground
- ASTM-D7734 - Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method
- ASTM-D7735 - Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
- ASTM-D7786 - Standard Test Method for Determining Enamel Holdout
- ASTM-D7787 - Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings
- ASTM-D7801 - Standard Terminology for Paint Brush Application Tools
- ASTM-D7802 - Standard Terminology for Paint Roller Application Tools
- ASTM-D7803 - Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
- ASTM-D7804 - Standard Test Method for Fiber Shedding of Paint Roller Covers
- ASTM-D7834 - Standard Test Method for Filling Material Shedding of Paint Brushes
- ASTM-D7835 - Standard Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine
- ASTM-D7868 - Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings
- ASTM-D7893 - Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
- ASTM-D7952 - Standard Test Method for Measuring Aspiration Potential of Aerosol Products
- ASTM-D7971 - Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
- ASTM-D8008 - Standard Practice for Representative Field Sampling of Traffic Paints
- ASTM-D8104 - Standard Guide for Determining Coating Qualification Test Data Applicability
- ASTM-D8157 - Standard Guide for Qualification Testing of Coatings Used in Coating Service Level I in Nuclear Power Plants
- ASTM-D8160 - Standard Test Method for Un-notched Cantilever Beam Impact Resistance (Izod Impact) Testing of Thermoplastic Pavement Marking Materials
- ASTM-D8161 - Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
- ASTM-D8163 - Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings
- ASTM-D8271 - Standard Test Method for the Direct Measurement of Surface Profile of Prepared Concrete
- ASTM-D8330 - Standard Specification for Artists’ Pastels
- ASTM-D8367 - Standard Practice for Making a Laboratory Pavement Marking Sample Using a Pavement Marking and Drop-on Particles
- ASTM-D8370 - Standard Test Method for Field Measurement of Electrochemical Impedance on Coatings and Linings
- ASTM-D8424 - Standard Guide for Retroreflective Composite Optics Laboratory Procedures
- ASTM-D8584 - Standard Guide for Testing of Preformed Thermoplastic Pavement Marking Material in the Laboratory and Installed Preformed Thermoplastic Pavement Markings in the Field
- ASTM-D868 - Standard Practice for Determination of Degree of Bleeding of Traffic Paint
- ASTM-D913 - Standard Practice for Evaluating Degree of Traffic Marking Line Wear
- ASTM-D969 - Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint (Withdrawn 2010)
- ASTM-G10 - Standard Test Method for Specific Bendability of Pipeline Coatings
- ASTM-G11 - Standard Practice for Effects of Outdoor Weathering on Pipeline Coatings
- ASTM-G12 - Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013)
- ASTM-G13 - Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)
- ASTM-G14 - Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
- ASTM-G17 - Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
- ASTM-G18 - Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
- ASTM-G19 - Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial (Withdrawn 2010)
- ASTM-G20 - Standard Test Method for Chemical Resistance of Pipeline Coatings
- ASTM-G42 - Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
- ASTM-G55 - Standard Test Method for Evaluating Pipeline Coating Patch Materials
- ASTM-G6 - Standard Test Method for Abrasion Resistance of Pipeline Coatings
- ASTM-G62 - Standard Test Methods for Holiday Detection in Pipeline Coatings
- ASTM-G70 - Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) (Withdrawn 2013)
- ASTM-G8 - Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
- ASTM-G80 - Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings (Withdrawn 2013)
- ASTM-G9 - Standard Test Method for Water Penetration into Pipeline Coatings
- ASTM-G95 - Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)