04.11: Building Constructions (I): E72 - E2110
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-E1017 - Standard Specification for Generic Performance Requirements for Exterior Residential Window Assemblies (Withdrawn 2003)
- ASTM-E1057 - Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
- ASTM-E1074 - Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
- ASTM-E1091 - Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
- ASTM-E1105 - Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
- ASTM-E1121 - Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
- ASTM-E1155 - Standard Test Method for Determining
F Floor Flatness andF F Floor Levelness NumbersL - ASTM-E1155M - Standard Test Method for Determining
F Floor Flatness andF F Floor Levelness Numbers (Metric) (Withdrawn 2023)L - ASTM-E1185 - Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
- ASTM-E1186 - Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
- ASTM-E1190 - Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
- ASTM-E1233 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
- ASTM-E1258 - Standard Test Method for Airflow Calibration of Fan Pressurization Devices
- ASTM-E1300 - Standard Practice for Determining Load Resistance of Glass in Buildings
- ASTM-E1307 - Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
- ASTM-E1334 - Standard Practice for Rating the Serviceability of a Building or Building-Related Facility (Withdrawn 2013)
- ASTM-E1369 - Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
- ASTM-E1399 - Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
- ASTM-E1410 - Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings (Withdrawn 2014)
- ASTM-E1423 - Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
- ASTM-E1424 - Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
- ASTM-E1425 - Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
- ASTM-E1464 - Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities (Withdrawn 2014)
- ASTM-E1465 - Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings (Withdrawn 2017)
- ASTM-E1480 - Standard Terminology of Facility Management (Building-Related)
- ASTM-E1481 - Standard Terminology of Railing Systems and Rails for Buildings
- ASTM-E1486 - Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
- ASTM-E1486M - Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
- ASTM-E1509 - Standard Specification for Room Heaters, Pellet Fuel-Burning Type
- ASTM-E1512 - Standard Test Methods for Testing Bond Performance of Bonded Anchors
- ASTM-E1513 - Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
- ASTM-E1514 - Standard Specification for Structural Standing Seam Steel Roof Panel Systems
- ASTM-E154 - Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
- ASTM-E1554 - Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
- ASTM-E1555 - Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
- ASTM-E1556 - Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
- ASTM-E1557 - Standard Classification for Building Elements and Related Sitework—UNIFORMAT II
- ASTM-E1583 - Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
- ASTM-E1592 - Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
- ASTM-E1602 - Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
- ASTM-E1605 - Standard Terminology Relating to Lead in Buildings
- ASTM-E1612 - Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
- ASTM-E1613 - Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)
- ASTM-E1637 - Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
- ASTM-E1643 - Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
- ASTM-E1644 - Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
- ASTM-E1645 - Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
- ASTM-E1646 - Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
- ASTM-E1660 - Standard Classification for Serviceability of an Office Facility for Support for Office Work
- ASTM-E1661 - Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
- ASTM-E1662 - Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
- ASTM-E1663 - Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
- ASTM-E1664 - Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
- ASTM-E1665 - Standard Classification for Serviceability of an Office Facility for Facility Protection
- ASTM-E1666 - Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
- ASTM-E1667 - Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
- ASTM-E1668 - Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
- ASTM-E1669 - Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
- ASTM-E1670 - Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
- ASTM-E1671 - Standard Classification for Serviceability of an Office Facility for Cleanliness
- ASTM-E1677 - Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls
- ASTM-E1679 - Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed
- ASTM-E1680 - Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems
- ASTM-E1692 - Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
- ASTM-E1693 - Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
- ASTM-E1694 - Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
- ASTM-E1699 - Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes
- ASTM-E1700 - Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
- ASTM-E1701 - Standard Classification for Serviceability of an Office Facility for Manageability
- ASTM-E1726 - Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
- ASTM-E1727 - Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
- ASTM-E1728 - Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
- ASTM-E1729 - Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
- ASTM-E1730 - Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
- ASTM-E1741 - Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry (Withdrawn 2009)
- ASTM-E1745 - Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
- ASTM-E1748 - Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
- ASTM-E1749 - Standard Terminology Relating to Rigid Wall Relocatable Shelters
- ASTM-E1753 - Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
- ASTM-E1765 - Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes
- ASTM-E1773 - Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
- ASTM-E1775 - Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
- ASTM-E1783 - Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
- ASTM-E1792 - Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
- ASTM-E1793 - Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
- ASTM-E1794 - Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200 °F Elevated Humidity Service), Type II Panels
- ASTM-E1795 - Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
- ASTM-E1796 - Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
- ASTM-E1797 - Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
- ASTM-E1800 - Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160 °F Elevated Humidity Service), Type I Panels
- ASTM-E1801 - Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
- ASTM-E1803 - Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels
- ASTM-E1804 - Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
- ASTM-E1807 - Standard Terminology Pertaining to Metal Connector Plates (Withdrawn 2005)
- ASTM-E1825 - Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems
- ASTM-E1826 - Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
- ASTM-E1827 - Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
- ASTM-E1828 - Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint (Withdrawn 2010)
- ASTM-E1836 - Standard Practice for Building Floor Area Measurements for Facility Management
- ASTM-E1851 - Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
- ASTM-E1857 - Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
- ASTM-E1864 - Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures (Withdrawn 2011)
- ASTM-E1886 - Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
- ASTM-E1887 - Standard Test Method for Fog Determination (Withdrawn 2006)
- ASTM-E1908 - Standard Practice for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
- ASTM-E1925 - Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures
- ASTM-E1946 - Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects
- ASTM-E196 - Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
- ASTM-E1973 - Standard Practice for Collection of Surface Dust by Air Sampling Pump Vacuum Technique for Subsequent Lead Determination (Withdrawn 2004)
- ASTM-E1974 - Standard Specification for Shelter, Electrical Equipment S-250/G
- ASTM-E1975 - Standard Specification for Shelter, Electrical, Equipment S-280/G
- ASTM-E1976 - Standard Specification for Shelter, Tactical, Nonexpandable
- ASTM-E1977 - Standard Specification for Shelter, Tactical, Expandable, One-Side
- ASTM-E1978 - Standard Specification for Shelter, Tactical, Expandable, Two-Side
- ASTM-E1979 - Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
- ASTM-E1993 - Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
- ASTM-E1996 - Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
- ASTM-E1998 - Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
- ASTM-E2004 - Standard Test Method for Facing Cleavage of Sandwich Panels
- ASTM-E2013 - Standard Practice for Developing Functions, Constructing FAST Diagrams, and Performing Function Analysis During Value Engineering (VE)/Value Analysis (VA) Study
- ASTM-E2025 - Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies (Withdrawn 2015)
- ASTM-E2026 - Standard Guide for Seismic Risk Assessment of Buildings
- ASTM-E2029 - Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
- ASTM-E2051 - Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis (Withdrawn 2010)
- ASTM-E2052 - Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities (Withdrawn 2008)
- ASTM-E2068 - Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
- ASTM-E2083 - Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit
- ASTM-E2094 - Standard Practice for Evaluating the Service Life of Chromogenic Glazings (Withdrawn 2011)
- ASTM-E2098 - Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
- ASTM-E2099 - Standard Practice for Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
- ASTM-E2103 - Standard Classification for Bridge Elements—UNIFORMAT II
- ASTM-E2110 - Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
- ASTM-E2112 - Standard Practice for Installation of Exterior Windows, Doors and Skylights
- ASTM-E2115 - Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
- ASTM-E2119 - Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
- ASTM-E2120 - Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
- ASTM-E2121 - Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
- ASTM-E2126 - Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
- ASTM-E2127 - Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
- ASTM-E2128 - Standard Guide for Evaluating Water Leakage of Building Walls
- ASTM-E2134 - Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
- ASTM-E2136 - Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022)
- ASTM-E2140 - Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
- ASTM-E2141 - Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
- ASTM-E2150 - Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
- ASTM-E2151 - Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings (Withdrawn 2019)
- ASTM-E2156 - Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings (Withdrawn 2022)
- ASTM-E2166 - Standard Practice for Organizing and Managing Building Data
- ASTM-E2252 - Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
- ASTM-E241 - Standard Guide for Limiting Water-Induced Damage to Buildings
- ASTM-E283 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
- ASTM-E330 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM-E331 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM-E405 - Standard Test Methods for Wear Testing Rotary Operators for Windows
- ASTM-E455 - Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
- ASTM-E488 - Standard Test Methods for Strength of Anchors in Concrete Elements
- ASTM-E489 - Standard Test Method for Tensile Strength Properties of Metal Connector Plates (Withdrawn 2005)
- ASTM-E529 - Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
- ASTM-E546 - Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
- ASTM-E547 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
- ASTM-E564 - Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
- ASTM-E575 - Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
- ASTM-E576 - Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
- ASTM-E577 - Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems (Withdrawn 2011)
- ASTM-E605 - Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
- ASTM-E621 - Standard Practice for the Use of Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E380) (Withdrawn 2008)
- ASTM-E631 - Standard Terminology of Building Constructions
- ASTM-E661 - Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
- ASTM-E695 - Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
- ASTM-E713 - Standard Guide for Selection of Scales for Metric Building Drawings
- ASTM-E72 - Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
- ASTM-E73 - Standard Practice for Static Load Testing of Truss Assemblies
- ASTM-E736 - Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
- ASTM-E741 - Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
- ASTM-E754 - Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
- ASTM-E759 - Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
- ASTM-E760 - Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
- ASTM-E761 - Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
- ASTM-E767 - Standard Test Method for Shear Strength Properties of Metal Connector Plates (Withdrawn 2005)
- ASTM-E773 - Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units (Withdrawn 2010)
- ASTM-E774 - Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units (Withdrawn 2006)
- ASTM-E779 - Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
- ASTM-E783 - Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
- ASTM-E833 - Standard Terminology of Building Economics
- ASTM-E835 - Standard Guide for Modular Coordination of Clay and Concrete Masonry Units (Withdrawn 2011)
- ASTM-E859 - Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
- ASTM-E864 - Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
- ASTM-E865 - Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
- ASTM-E866 - Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
- ASTM-E874 - Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
- ASTM-E894 - Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
- ASTM-E907 - Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems (Withdrawn 2013)
- ASTM-E917 - Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
- ASTM-E935 - Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
- ASTM-E937 - Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
- ASTM-E964 - Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
- ASTM-E985 - Standard Specification for Permanent Metal Railing Systems and Rails for Buildings (Withdrawn 2015)
- ASTM-E987 - Standard Test Methods for Deglazing Force of Fenestration Products
- ASTM-E990 - Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
- ASTM-E997 - Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing
- ASTM-E998 - Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
- ASTM-PS116 - Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films (Withdrawn 2001)
- ASTM-PS27 - Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures (Withdrawn 1996)
- ASTM-PS53 - Guide for Identification and Management of Lead Hazards in Facilities (Withdrawn 2000)
- ASTM-PS72 - Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) (Withdrawn 2001)
- ASTM-PS88 - Practice for Determination of Lead in Paint, Settled Dust, Soil, and Air Particulate by Field-Portable Electroanalysis (Withdrawn 1999)
- ASTM-PS95 - Provisional Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings using Field-Portable X-Ray Fluorescence (XRF) Devices (Withdrawn 2001)