FSC 5999: Miscellaneous Electrical and Electronic Components
The following documents are a part of this series:- A-A-52536 - Contact, Electrical No. 12, 14, and 16 A.W.G.
- A-A-55485 - Mounting Pads, Electrical-Electronic Component, General Requirements for
- A-A-55485/1 - Mounting Pads, Electrical-Electronic Component, .100 Diameter Pin Center
- A-A-55485/10 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 Diameter Pin Center
- A-A-55485/11 - Mounting Pads, Electrical-Electronic Component, Vertical Type
- A-A-55485/2 - Mounting Pads, Electrical-Electronic Component, .200 or .230 Diameter Pin Center
- A-A-55485/3 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .100 Diameter Pin Center to a Larger Diameter
- A-A-55485/4 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 or .230 Diameter Pin Center to a Larger Diameter
- A-A-55485/5 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 or .230 Diameter Pin Center to a Grid Pattern
- A-A-55485/6 - Mounting Pads, Electrical-Electronic Component, for Relays and Discrete Components
- A-A-55485/7 - Mounting Pads, Electrical-Electronic Component, Multiple Applications
- A-A-55485/COMPLETE - Mounting Pads, Electrical-Electronic Component, General Requirements For
- A-A-55507 - Clip, Electrical, Fuse General Requirements for
- A-A-55507/1 - Clip, Electrical, Fuse, 30 and 60 Ampere, for Fuse Diameters 1/4 Inch thru 13/16 Inch
- A-A-55507/2 - Clip, Electrical, Fuse, P.C. Board, 15 and 30 Ampere, for Fuse Diameter 1/4 Inch
- A-A-55507/3 - Clip, Electrical, Fuse, P.C. Board, Up to 15 Ampere, for Fuse Diameter 5 MM
- A-A-55541 - Delay Line, Passive, General Requirements for
- A-A-55541/1 - Passive Delay Line, 10 Tap, 10 to 200 Nanoseconds
- A-A-59465 - Delay Lines, Active, General Requirements for
- A-A-59465/1 - Delay Line, Active, 14 Pin Surface Mount, 5 Tap, 5 to 500 Nanoseconds
- A-A-59466 - Clips, Electrical, General Specification for
- AMS-7510 - Magnets, Rare-Earth/Cobalt, Permanent Powder-Metallurgy Product (STABILIZED May 2017)
- AMS-7510/2 - Magnets, Rare-Earth/Cobalt, Permanent, Samarium-Cobalt, 33/67 - 18 (143) 250 (STABILIZED Jun 2017)
- AN-3435 - Terminal Block - Electrical
- AS-25274 - Cap, Electrical (Wire End, Crimp Style, Type Ii, Class 1) for 105 °C Total Conductor Temperature
- DESC-DWG-84002 - Heat Sinks for Semiconductor Devices
- DESC-DWG-84035 - Delay Lines, Passive, 10-Tap, Dual-in-Line, 16-Pin
- DESC-DWG-84049 - Clip, Electrical
- DESC-DWG-84087 - Delay Lines, 1 to 5 Taps, 14-Pin DIP Compatible, T2L Interfaced
- DESC-DWG-85008 - Delay Lines, Active, 5 Taps, 14-Pin DIP, TTL Interfaced
- DESC-DWG-85009 - Delay Lines, Active, Two Delay Lines, 14-Pin DIP, TTL Interfaced
- DESC-DWG-85012 - Delay Lines, Passive, 20 Taps, 24 Pin, DIP
- DESC-DWG-85013 - Delay Lines, 5 Taps, 14-Pin DIP Compatible, TTL Interfaced
- DESC-DWG-85014 - Delay Line, Active, 10 Taps, 14 Pin Dip, Ttl Interfaced
- DESC-DWG-85019 - Delay Lines, Programmable 16 Pin Compatible, 3 Bit, Ttl Compatible
- DESC-DWG-85032 - Electrical Solder Clips
- DESC-DWG-85077 - Clip, Electrical
- DESC-DWG-85078 - Delay Lines, Active, Programmable 3 Bit, 16 Pin DIP Compatible, Emitter-Coupled Logic (ECL)
- DESC-DWG-85099 - Gaskets, Shielding, Emi/Rfi, Elastomer, Conne +Cancelled, Superseded By MIL-G-83528/4
- DESC-DWG-85100 - Gaskets, Shielding, Emi/Rfi, Elastomer, Rectangular
- DESC-DWG-85103 - Gaskets, Shielding, Emi/Rfi, Elastomer, Solidcircul
- DESC-DWG-85104 - Gaskets, Shielding, Emi/Rfi, Elastomer, SOLIDD-Sh
- DESC-DWG-85105 - Gasket, Shielding, EMI/RFI, O-Ring, Circular Cross Section
- DESC-DWG-85106 - Gaskets, Shielding, Emi/Rfi, Elastomer, Hollow D-S
- DESC-DWG-85107 - Gaskets, Shielding, Emi/Rfi, Elastomer, Hollow P-S
- DESC-DWG-85108 - Gaskets, Shielding, Emi/Rfi, Elastomer, Solidrectan
- DESC-DWG-85109 - Gaskets, Shielding, Emi/Rfi, Elastomer, Channel
- DESC-DWG-85110 - Gaskets, Shielding, Emi/Rfi, Elastomer, Hollow O-
- DESC-DWG-85111 - Gaskets, Shielding, Emi/Rfi, Elastomer, Flat Circular Washers
- DESC-DWG-85115 - Contact Assembly, Electrical
- DESC-DWG-85116 - Contact Assembly, Electrical
- DESC-DWG-85117 - Gasket, Shielding, Emi/Rfi, Elastomer, Solid Circular Strip
- DESC-DWG-85118 - Gaskets, Shielding, Emi/Rfi, Elastomer, D- Cross Section Waveguide
- DESC-DWG-85136 - Heat Sinks, Electrical-Electronic Component, Fin Stock, Aluminum Alloy
- DESC-DWG-85141 - Delay Line, Three Delay Line Units, 14 Pin Dip Compatible, Ttl Interfaced
- DESC-DWG-85151 - Delay Line, Three Delay Line Units, 14 Pin Dip Compatible, Ttl Interfaced
- DESC-DWG-86079 - Contact Assembly, Electrical
- DESC-DWG-86128 - Shielding Gasket, Electronic, Rfi, D Type Connector
- DESC-DWG-86129 - Gaskets, Sheilding, Emi/Rfi, Wire Mesh, Resilient, Strips With Round Cross Section
- DESC-DWG-87035 - Delay Line, Active, Triple, 14-Pin Dip Compatible, Low Power Schottky
- DESC-DWG-88013 - Delay Lines, Passive, 3-Pin, Sip
- DESC-DWG-88023 - Delay Lines, Active, Programmable 4 Bit, 24-Pin, Surface Mount, ECL Interfaced
- DESC-DWG-89010 - Gaskets, Shielding, Emi/Rfi, Elastomer, Connector Mounting Flange
- DESC-DWG-90046 - Gaskets, Shielding, Emi/Rfi Oriented Wires in Silicone Rubber
- DESC-DWG-90095 - Shielding Tape, Emi, Knitted Wire Mesh
- DESC-DWG-91015 - Thermal Link, Aluminum
- DESC-DWG-92017 - Gaskets, Emi/Rfi Shielding, Expanded Ptfe With Carbon Filler
- DSCC-85005 - Contact Assembly, Electrical
- DSCC-85070 - Contact Assembly, Electrical
- DSCC-89011 - Contact Assembly, Electrical
- DSCC-90022 - Contact Assembly, Electrical
- DSCC-90040 - Contact Assembly, Electrical
- IPC-D-350 - Printed Board Description in Digital Form
- IPC-DW-425 - Design and End Product Requirements for Discrete Wiring Boards and Associated Specificatio
- IPC-FC-233 - Specification For Flexible Adhesive Bonding
- IPC-NC-349 - Computer Numerical Control Formatting for Drillers and Routers
- MIL-A-28870 - Assemblies, Electrical Backplane, Printed-Wiring, General Specification For
- MIL-B-13106 - Buzzer (Interrupter BZ-7 ( )) (No Superseding Document)
- MIL-C-13373 - Case, Meter CY-1626( )/U
- MIL-C-28809 - Circuit Card Assemblies, Rigid, Flexible, and Rigid Flex (No Superseding Document)
- MIL-C-55422 - Clip, Electrical, Grid & Anode, General Specification For
- MIL-C-55422/1 - Clip, Electrical, Grid
- MIL-C-55422/2 - Clip, Electrical, Anode (No Superseding Document)
- MIL-C-55422/3 - Clip, Electrical, Anode (No Superseding Document)
- MIL-C-55422/4 - Clip, Electrical, Anode (No Superseding Document)
- MIL-C-71044 - Circuit Card, Battery Test: 11784531 (No Superseding Document)
- MIL-C-83413/7 - Connectors & Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector For
- MIL-D-23859 - Delay Lines, Pulse, Electromagnetic, Fixed, General Specification for (Superseded by MIL-D-83531)
- MIL-D-23859/1 - Delay Line, Pulse, Electromagnetic, Fixed Style Pa (No Superseding Document)
- MIL-D-23859/10 - Delay Line, Pulse, Electromagnetic, Fixed Style Pk (No Superseding Document)
- MIL-D-23859/11 - Delay Line, Pulse, Electromagnetic, Fixed Style Pl (No Superseding Document)
- MIL-D-23859/12 - Delay Line, Pulse, Electromagnetic, Fixed Style Pm (No Superseding Document)
- MIL-D-23859/13 - Delay Line, Pulse, Electromagnetic, Fixed Style RA (No Superseding Document)
- MIL-D-23859/3 - Delay Line, Pulse, Electromagnetic, Fixed Style Pc (No Superseding Document)
- MIL-D-23859/4 - Delay Line, Pulse, Electromagnetic, Fixed Style Pd (No Superseding Document)
- MIL-D-23859/5 - Delay Line, Pulse, Electromagnetic, Fixed Style Pe (No Superseding Document)
- MIL-D-23859/6 - Delay Line, Pulse, Electromagnetic, Fixed Style Pf (No Superseding Document)
- MIL-D-23859/7 - Delay Line, Pulse, Electromagnetic, Fixed Style Pg (No Superseding Document)
- MIL-D-23859/8 - Delay Line, Pulse, Electromagnetic, Fixed Style Ph (No Superseding Document)
- MIL-D-23859/9 - Delay Line, Pulse, Electromagnetic, Fixed Style Pj (No Superseding Document)
- MIL-D-83531 - Delay Lines, Passive, General Specification For
- MIL-D-83531/1 - Delay Lines, 14-Pin Dip Compatible, 5 Tap
- MIL-D-83531/2 - Delay Lines, 10-Tap, Dual-In-Line, 16-Pin (No Superseding Document)
- MIL-D-83531/3 - Delay Lines, 20-Tap, Dual-In-Line, 24-P1N (No Superseding Document)
- MIL-D-83532 - Delay Lines, Active, General Specification For
- MIL-D-83532/1 - Delay Lines, 14 Dip Compatible, 5 Tap (5 Section Minimum)
- MIL-D-83532/2 - Delay Lines, 14 Pin Dip Compatible, 5 Tap (10 Section Minimum)
- MIL-D-83532/3 - Delay Lines, 14 Pin Dip Compatible, 10 Tap
- MIL-D-83532/4 - Delay Lines, 14 Pin Dip Compatible, 3 Delay Circuits per Package
- MIL-D-83532/5 - Delay Lines, Active, 16-Pin Dip Compatible, Programmable 3-Bit, Ttl Compatible
- MIL-D-83532/6 - Delay Lines, Active, 16-Pin Dip Compatible, Programmable 3-Bit, Emitter-Coupled Logic
- MIL-D-83532/7 - Delay Lines, Active, 16-Pin Compatible, Programmable 3-Bit, Ttl Compatible, With Input
- MIL-DTL-55422 - Clip, Electrical, Grid and Anode, General Specification for
- MIL-DTL-55422/1 - Clip, Electrical, Grid
- MIL-DTL-83413/12 - Connectors and Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector for Types I and III Grounding Assemblies, Stainless Steel Clip, Electrical
- MIL-DTL-83413/7 - Connectors and Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector for Types I and III Grounding Assemblies, Aluminum Clip, Electrical
- MIL-DTL-83528 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, General Specification for
- MIL-DTL-83528/1 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, Circular Strip, .040 through .250 Diameter
- MIL-DTL-83528/10 - Gasketing Material, Conductive, Elastomer, Electrical, EMI/RFI, Channel Strip
- MIL-DTL-83528/11 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, Hollow O-Strip
- MIL-DTL-83528/12 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Electrical, EMI/RFI, Flat Circular Washer
- MIL-DTL-83528/13 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Electrical, EMI/RFI, Waveguide
- MIL-DTL-83528/14 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, for use in Time Totalizing Meters Covered by MIL-M-7793
- MIL-DTL-83528/15 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, Sheet Stock
- MIL-DTL-83528/16 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, Continous Cured Extrusion and Continous Roll Sheet Stock
- MIL-DTL-83528/2 - Gasketing Material, Conductive Shielding Gasket, Electrical, O-Ring, Standard
- MIL-DTL-83528/3 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, Solid 'D' Shaped Strip
- MIL-DTL-83528/4 - Gasketing Material, Conductive, Shielding Gasket, Electronic, EMI/RFI, Connector Flange Mount
- MIL-DTL-83528/5 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, O-Ring, Non-Standard
- MIL-DTL-83528/6 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, Rectangular, D-Cross Section
- MIL-DTL-83528/7 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, Hollow D-Strip
- MIL-DTL-83528/8 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, Hollow P-Strip
- MIL-DTL-83528/9 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, Solid Rectangular-Strip
- MIL-E-10004 - Electronic Standard and Nonstandard Parts, Materiels, and Processes in Signal Corps Equipment.
- MIL-E-48223 - Electrocoulometer, Dual Anode, Two Microampere Hours and Nine Hundred and Sixty Microampere Hours Capacity (No Superseding Document)
- MIL-F-12201 - Fan, Ventilating, Propeller (Ventilator PH-255-) ()
- MIL-F-12416 - Footswitch Sa-103( )/Frc
- MIL-F-4273 - Foil, Magnetic Shielding, 0.003 Inches Thin-Gage Steel (Use MIL-S-4473)
- MIL-F-55561 - Foil, Copper, Cladding for Printed Wiring Boards (Future Procurements for This Material Should Refer To the Portions of IPC-CF-150E)
- MIL-G-13451 - Gage, Dimensional Control, Mechanical (for Signal Corps Equipment) (No Superseding Document)
- MIL-G-55636 - Glass Cloth, Resin Preimpregnated (B-Stage) (for Multilayer Printed Wiring Boards) (Superseded by MIL-P-13949)
- MIL-G-83528 - Gasketing Material, Conductive, Sheilding Gasket, Electronic, Elastomer, Emi/Rfi Gener
- MIL-G-83528/1 - Gasketing Material, Conductive, Sheilding Gasket, Electrical, Emi/Rfi Circular Strip .
- MIL-G-83528/10 - Gasketing Material, Conductive, Elastomer, Electrical, Emi/Rfi, Channel Strips
- MIL-G-83528/11 - Gasketing Material, Shelding Gasket, Electro Nic Elastomer, Emi/Rfi, Hollow O-Strips
- MIL-G-83528/12 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Electrical, E
- MIL-G-83528/13 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Electrical, E
- MIL-G-83528/14 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, For
- MIL-G-83528/2 - Gasketing Material, Conductive, Sheilding Gasket, Electrical, Emi/Rfi O-Ring Standard
- MIL-G-83528/3 - Gasketing Material, Conductive, Shielding Gasket, Electrical, Emi/Rfi Solid D Shaped S
- MIL-G-83528/4 - Gasketing Material, Conductive, Sheilding Gasket, Electronic, Elastomer, Emi/Rfi, Conn
- MIL-G-83528/5 - Gasketing Material, Conductive, Sheilding Gasket, Electronic, Elastomer, Emi/Rfi, O-Ri
- MIL-G-83528/6 - Gasketing Material, Conductive, Sheilding Gasket, Electronic, Elastomer, Electrical, E
- MIL-G-83528/7 - Gasketing Material, Conductive, Sheilding Gasket, Electrictronic, Elastomer, Emi/Rfi,
- MIL-G-83528/8 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, Holl
- MIL-G-83528/9 - Gasketing Material, Conductive, Elastomer, Electrical, Emi/Rfi, Solid Rectangular Stri
- MIL-H-83416 - Heater, Electrical (for Heating Electrical and Electronic Equipment (No Superseding Document)
- MIL-H-83416/1 - Heater, Electrical (for Heating Electrical and Electronic Components) (24.18 Watts Maximum Input Power) (No Superseding Document)
- MIL-H-83416/2 - Heater, Electrical (for Heating Electrical and Electronic Components) (10.7 Watts Maximum Input Power) (No Superseding Document)
- MIL-H-83416/3 - Heater, Electrical (for Heating Electrical and Electronic Components) (9.72, 8.8, 8.03, 15.79, 0.21, 0.64, 13.69, 43.66, 77.12, a 43.42 Watts Maximum Input Power) (No Superseding Document)
- MIL-H-83416/4 - Heater, Electrical (for Heating Electrical and Electronic Components) (48.96 Watts Maximum Input Power) (No Superseding Document)
- MIL-H-83416/5 - Heater, Electrical (for Heating Electrical and Electronic Components) (20.32 Watts Maximum Input Power) (No Superseding Document)
- MIL-H-87111 - Heat Sinks, Semiconductor Devices, General Specification for (No Superseding Document)
- MIL-H-87111/1 - Heat Sinks-Insulators, Class 1, 4, 6, and 7 (Wafer Type) (Superseded by NAS-4117)
- MIL-H-87111/2 - Heat Sinks, Semiconductor Devices, Material Classes 2, 3, and 5 (Retainer Clip Type) (Superseded by NAS-4118)
- MIL-H-87111/3 - Heat Sinks, Electrical-Electronic Component Class 1 and Class 2 (Press-on Type) (Superseded by NAS-4119)
- MIL-H-87111/4 - Heat Sink, Semiconductor Devices, Class 1 (Encapsulating Type) (Superseded by NAS-4120)
- MIL-H-87111/5 - Heat Sinks, Electrical-Electronic Component, Semiconductor Device, Class 1 (Formed) (Superseded by NAS-4121)
- MIL-H-87111/6 - Heat Sinks, Semiconductor Devices, Class 1 (Extruded) (Superseded by NAS-4122)
- MIL-H-87111/7 - Heat Sinks, Semiconductor Devices, Class 1, (for Dual-In-Line Packages) (Superseded by NAS-4123)
- MIL-H-87111/8 - Heat Sinks, Semiconductor Devices, Class 2 (Dual-Link) (Superseded by NAS-4124)
- MIL-H-87111/COMPLETE - Complete Set of Current Slash Sheets for MIL-H-87111, Heat Sinks, Semiconductor Devices,
- MIL-I-83287 - Indicator, Fault Locating General Specification For
- MIL-I-83287/1 - Indicator, Fault Locating, Flag Indicating, Mechanical Reset
- MIL-I-83287/3 - Indicators, Fault Locating, Ball Indicating, Electrical Reset
- MIL-I-83287/4 - Indicator, Fault Locating, Flag Indicating, Mechanical Reset
- MIL-I-83287/5 - Indicator, Fault Locating, Flag Indicating, Electrical Reset, Printed Circuit Mounting
- MIL-M-38527 - Mounting Pads, Electrical-Electronic Component, General Specification for (Superseded by A-A-55485)
- MIL-M-38527/1 - Mounting Pads, Electrical-Electronic Component, .100 Diameter Pin Center (Superseded by A-A-55485/1)
- MIL-M-38527/10 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 Diameter Pin Center (Superseded by A-A-55485/10)
- MIL-M-38527/11 - Mounting Pads, Electrical-Electronic Component, Verticle Type (Superseded by A-A-55484/11)
- MIL-M-38527/2 - Mounting Pads, Electrical-Electronic Component, .200 or .230 Diameter Pin Center (Superseded by A-A-55485/2)
- MIL-M-38527/3 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .100 Diameter Pin Center To a Larger Diameter (Superseded by A-A-55485/3)
- MIL-M-38527/4 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 or .230 Diameter Pin Center To a Larger Diameter (Superseded by A-A-55485/4)
- MIL-M-38527/5 - Mounting Pads, Electrical-Electronic Component, Lead Conversion, .200 or .230 Diameter Pin Center To a Grid Pattern (Superseded by A-A-55485/5)
- MIL-M-38527/6 - Mounting Pad, Electrical-Electronic Component, Relay and Discrete Component (Superseded by A-A-55485/6)
- MIL-M-38527/60 - Mounting Pad, Electrical - Electronic Component, Relay & Discrete Component
- MIL-M-38527/8 - Mounting Pads, Electrical-Electronic Component, .002, .005, and .010 Inch Thick (Superseded by MIL-I-49466/1 & MIL-I-49466/2)
- MIL-M-38527/9 - Mounting Pads, Electrical-Electronic Component, Hardware for Mounting (Superseded by MIL-I-49466/1 and MIL-I-49466/2)
- MIL-M-38527/COMPLETE - Complete Set of Current Slash Sheets for MIL-M-38527 Pleasereprice:
- MIL-M-55183 - Micromodules, Design, Construction, and Application of (for Army Electronic Equipment)
- MIL-M-83436 - Multiwire Interconnection Boards (Plate-Through Hole) (See Notice for Replacement Information)
- MIL-P-13949 - Plastic Sheet, Laminated, Metal Clad (for Printed Wiring Board)
- MIL-P-13949/1 - Plastic Sheet, Laminated, Metal-Clad (for Printed Wiring Boards), Base Material Px, Paper Base, Epoxy Resin, Flame Resistant, Copper-Clad (Superseded by MIL S-13949/4)
- MIL-P-13949/10 - Sheet, Printed Wiring Board, Laminated, Base Material Gi
- MIL-P-13949/11 - Sheet, Printed Wiring Board, Prepreg, Base Material Ge
- MIL-P-13949/12 - Plastic Sheet, Laminated, Materials (for Printed Wiring Boards)
- MIL-P-13949/13 - Sheet, Printed Wiring Board, Prepreg, Base Material Gi (Woven E-Glass Reinforcement, P
- MIL-P-13949/14 - Plastic Sheet, Laminated, Metal-Clad (for Printed Wiring Boards), Base Material Gy, Glass Base Woven, Polytetrafluoroethylene Resin, Flame Resistant, for Microwave Application, Copper-Clad (No Superse
- MIL-P-13949/15 - Plastic Sheet, Laminated, Metal-Clad (for Printed Wiring Board
- MIL-P-13949/16 - Sheet, Printed Wiring Board, Prepreg, Base Material AF (Woven Aramid Reinforcement, Ep
- MIL-P-13949/17 - Plastic Sheet, Laminated, Metal-Clad (for Printed Wiring Boards), Base Material Ai, Aramid Fabric Woven, Polyimide Resin, Copper-Clad (No Superseding Document)
- MIL-P-13949/18 - See: MIL-S-13949/18
- MIL-P-13949/19 - Sheet, Printed, Wiring Board, Laminated, Base Material
- MIL-P-13949/2 - Sheet, Printed Wiring Board, Laminated, Base Material Gb (Canc, 1994, Use MIL-S-13949/
- MIL-P-13949/20 - Plastic Sheet, Laminated, Materials (for Prin
- MIL-P-13949/21 - Plastic Sheet, Laminated, Materials (for Printed Wiring Boards), Base Material, Ai, Aramid, Woven, Majority Polyimide, Resin Preimpregnated (B-Stage) (No Superseding Document)
- MIL-P-13949/22 - Sheet, Printed Wiring Board, Laminate, Base
- MIL-P-13949/23 - Sheet, Printed Wiring Board, Prepreg, Base Material Bf (Nonwoven Aramid Reinforcement, Epo
- MIL-P-13949/24 - Sheet, Printed Wiring Board, Laminated, Base Material GM (Woven E-Glass Reinforcement,
- MIL-P-13949/25 - Plastic Sheet, Laminated, Metal Clad(for Printed Wiring (Canc, 1993, Use MIL-S-13949/2
- MIL-P-13949/26 - Sheet, Printed Wiring Board, Prepreg, Base Material GM (Woven
- MIL-P-13949/27 - See: MIL-S-13949/27
- MIL-P-13949/28 - See: MIL-S-13949/28
- MIL-P-13949/29 - See MIL-S-13949/29
- MIL-P-13949/3 - Plastic Sheet, Laminated, Metal-Clad (for Printed Wiring Boards), Base Material Ge, Glass Base, Woven, Majority Difunctional Epoxy Resin, General Purpose,Copper-Clad
- MIL-P-13949/30 - See: MIL-S-13949/30
- MIL-P-13949/31 - See: MIL-S-13949/31
- MIL-P-13949/32 - See: MIL-S-13949/32
- MIL-P-13949/4 - Sheet, Printed Wiring Board, Laminated, Base Material Gf (Woven E-Glass Reinforcement,
- MIL-P-13949/5 - Plastic Sheet, Laminated, Metal Clad (for Printed
- MIL-P-13949/6 - Plastic Sheet, Laminated, Metal-Clad (for Printed Wiring Boards), Base Material Gp, Glass Base, Non Woven, Polytetrafluoroethylene Resin, Flame Resistant, Copper-Clad (No Superseding Document)
- MIL-P-13949/7 - Plastic Sheet, Laminated, Metal-Clad (for Printed Wiring Boards), Base Material Gf, Glass Base, Nonwoven, Polytetrafluoroethylene Resin, Flame Resistant, for Microwave Application, Copper-Clad (No Sup
- MIL-P-13949/8 - Plastic Sheet, Laminated, Metal-Clad (for Printed Wiring Boards), Base Material Gt, Glass Base, Woven, Polytetrafluoroethylene Resin, Flame Resistant, Copper-Clad (No Superseding Document)
- MIL-P-13949/9 - Plastic Sheet, Laminated, Metal-Clad (for Printed Wiring Boards), Base Material Gx, Glass Base, Woven, Polytetrafluoroethylene Resin, Flame Resistant, for Microwave Application, Copper-Clad (No Supers
- MIL-P-13949/COMPLETE - Complete Set of Current Slash Sheets for MIL-P-13949, MIL-S-13949, Sheet, Printed Wiring B
- MIL-P-21193 - Printed Wiring, General Specification (Use MIL-P-55110)
- MIL-P-27538 - Plastic Sheet, FEP-Fluorocarbon (Unfilled) Copper Clad (for Printed Wiring) (No Superseding Document)
- MIL-P-28809 - Circuit Card Assemblies, Rigid, Flexible, & Rigid-Flex (Renumbered MIL-C-28809)
- MIL-P-46843 - Printed Wiring Assemblies, Production of (No Superseding Document)
- MIL-P-55424 - Printed Wiring Boards, Multilayered (Superseded by MIL-P-55110 Now MIL-PRF-55110)
- MIL-P-55617 - Plastic Sheet, Thin Laminate, Metal Clad (for Printed Wiring, Primarily for Multilayer) (Superseded by MIL-P-13949)
- MIL-P-55640 - Printed Wiring Boards Multilayer (Plated Through Hole) (Use MIL-P-55110)
- MIL-P-82585 - Printed Wiring Board (Superseded by MIL-P-55110 Now MIL-PRF-55110)
- MIL-PRF-83531 - Delay Lines, Passive, General Specification for
- MIL-PRF-83531/1 - Delay Lines, 10-Tap, Dual-in-Line, 14-Pin
- MIL-PRF-83531/4 - Delay Lines, 10-Tap, Dual-In-Line, 14-Pin, Surface Mount Device
- MIL-PRF-83532 - Delay Lines, Active General Specification for
- MIL-PRF-83532/1 - Delay Lines, 14-Pin Dip Compatible, 5 Tap
- MIL-PRF-83532/2 - Delay Lines, 14-Pin Dip Compatible, 5 Tap
- MIL-PRF-83532/3 - Delay Lines, 14-Pin Dip Compatible, 10 Tap
- MIL-PRF-83532/4 - Delay Lines, 14-Pin Dip Compatible, 3 Delay Circuits Per Package
- MIL-PRF-83532/5 - Delay Lines, Active, 16-Pin Dip Compatible, Programmable 3-Bit, Ttl Compatible (No Superseding Document)
- MIL-PRF-83532/6 - Delay Lines, Active, 16-Pin Dip Compatible, Programmable 3-Bit, Emitter-Coupled Logic (No Superseding Document)
- MIL-PRF-83532/7 - Delay Lines, Active, 16-Pin Dip Compatible, Programmable 3-Bit, TTL Compatible, with Input Buffer
- MIL-PRF-83532/8 - Delay Lines, Active, 14-Pin Surface Mount, 5 Tap (No Superseding Document)
- MIL-R-39027 - Readouts, Incandescent Type, General Specification for (No Superseding Document)
- MIL-R-39027/1 - Readout, Style Rp01 (Twelve Message Unit)
- MIL-R-39027/2 - Readout, Style Rb01
- MIL-S-13949/22 - Sheet, Printed Wiring Board, Laminated, Base Material Bf (Nonwoven Aramid Reinforcement, Epoxy Resin, Metal Clad or Unclad) (No Superseding Document)
- MIL-S-13949/23 - Sheet, Printed Wiring Board, Prepreg, Base Material Bf (Nonwoven Aramid Reinforcement, Epoxy Resin, Flame Resistant) (No Superseding Document)
- MIL-S-13949/25 - Sheet, Printed Wiring Board, Laminated, Base Material Cf (Nonwoven Polyester, Epoxy Resin, Flame Resistant, Metal Clad or Unclad) (No Superseding Document)
- MIL-S-13949/5 - Sheet, Printed Wiring Board, Laminated, Base Material Gh (Woven E-Glass Reinforcement, Majority Polyfunctional Epoxy Resin, Hot Strength Retention, Flame Resistant, Metal Clad or Unclad) (No Superseding Document)
- MIL-S-47235 - Shielding, Magnetic, Foil, Sheet (No Superseding Document)
- MIL-S-49433 - Surface Acoustic Wave Devices, General Specification for (No Superseding Document)
- MIL-S-49433/1 - Surface Acoustic Wave Devices, Bandpass Filter (No Superseding Document)
- MIL-S-55620 - Substrates, Ceramic, for Deposition of Thin Film Microciruit (Refer To MIL-STD-883)
- MIL-S-83528/1 - Shielding Gasket, Electrical, Emi/Rfi Circular Strip .040 Thru .250 Diameter
- MIL-S-83528/2 - Shielding Gasket, Electrical Emi/Rfi O-Ring Standard
- MIL-S-83528/3 - Shielding Gasket, Electrical, Emi/Rfi Solid (D) Shaped Strip
- MIL-S-83528/4 - Shielding, Gasket, Electrical, Emi/Rfi, Elastomer Flange Mount
- MIL-S-83528/5 - Shielding Gasket, Electrical Emi/Rfi O-Ring Non-Standard
- MIL-STD-1276 - Leads for Electronic Component Parts
- MIL-STD-1495 - Multilayer Printed Wiring Boards for Electronic Equipment (Superseded by MIL-STD-275)
- MIL-STD-1569 - REQUIREMENTS FOR THE REPAIR and MODIFICATION OF PRINTED WIRING ASSEMBLIES (SUPERSEDED BY MIL-P-28809)
- MIL-STD-1837 - Miscellaneous Electrical and Electronic Components, Selection Guide (NO SUPERSEDING Document)
- MIL-STD-2118 - Flexible and Rigid Flex Printed Wiring for Electronic Equipment, Design Requirements for (Superseded by IPC-2221 and IPC-2223)
- MIL-STD-2119 - Design Requirements for Printed-Wiring Electrical Backplane Assemblies
- MIL-STD-429 - PRINTED WIRING and PRINTED CIRCUIT TERMS and DEFINITIONS (SEE ANSI/IPC-T-50)
- MIL-T-47326 - Tape, Pressure-Sensitive Adhesive, Aluminum-Backed, Electrically Conductive
- MIL-W-47056 - Wire, Mesh, Knitted, Steel, Copper-Clad, Tin Coated (No Superseding Document)
- MMPA-0100 - Standard Specifications for Permanent Magnet Materials
- MS-16122 - Choke, Radio Frequency Molded (Lt5K101 To Lt5K114, Incl.)
- MS-16221 - Choke, Radio Frequency, Molded (Use ms-91189)
- MS-16222 - Choke, Radio Frequency, Lt7K233 To Ltk252, Inclusive (Superseded by ms-90542)
- MS-16223 - Chokes, Radio Frequency, Molded, Lt7K211 To Lt7K232, Inclusive
- MS-16224 - Chokes, Radio Frequency, Molded, Lt7K125 To Lt7K144, Inclusive (Use ms-75008)
- MS-16225 - Chokes, Radio Frequency, Molded, Lt7K102 To Lt7K124, Inclusive (Use ms-18130)
- MS-16226 - Chokes, Radio Frequency, Molded, Lt7K145 To Lt7K187, Inclusive
- MS-16441 - Chokes, Radio Frequency, Hermetically Sealed in Metallic Cases (Lt7K042 Thru Lt7K047) (Use ms-18132)
- MS-16444 - Chokes, Radio Frequency, Plastic Encased (Lt8K067 Thru Lt8K072)
- MS-16445 - Chokes, Radio Frequency, Plastic Encased (Lt8K073 Thru Lt8K087)
- MS-16447 - Choke, Radio Frequency, Plastic Encased (Lt8K099 Thru Lt8K101)
- MS-16454 - Choke, Radio Frequency (Lt4K001)
- MS-17177 - Connector, Receptacle (Grounded) With Switch Dpst, 125 Volt, 3 Amps (Superseded by MIL-R-2726/43)
- MS-27574 - Cable, Aircraft and Age Grounding (Superseded by MIL-DTL-83413/1 and MIL-C-83413/3)
- NAS-4117 - Heat Sink, Insulator, Wafer Type
- NAS-4118 - Heat Sink, Electrical-Electronic Component, Semiconductor Devices, Retainer Clip Type
- NAS-4119 - Heat Sink, Electronic Component, Semiconductor Devices, Press-on Type
- NAS-4120 - Heat Sink, Electrical, Electronic Component, Semiconductor Devices, Encapsulating Type, To-5
- NAS-4121 - Heat Sink, Electrical, Electronic Component, Semiconductor Devices, Formed
- NAS-4122 - Heat Sink, Electrical-Electronic Component, Semiconductor Devices, Extruded
- NAS-4123 - Heat Sink, Electrical-Electronic Component, Semiconductor Devices, for Dual Inline Packages (Dip)
- NAS-4124 - Heat Sink, Electrical/Electronic Component, Semiconductor Devices, Dual Link
- QPL-28870 - Assemblies, Electrical Backplane, Printed-Wiring, General Specification for (No Superseding Document)
- QPL-39027 - Readouts, Incandescent Type, General Specification For
- QPL-55617 - Plastic Sheet, Thin Laminate, Metal Clad (for Printed Wiring, Primarily for Multilayer) (See MIL-P-13949 and QPL-13949)
- QPL-55636 - Glass Cloth, Resin Preimpregnated (B Stage) (for Multilayer Printed Wiring Boards) (See MIL-P-13949 and QPL-13949)
- QPL-83416 - Heater, Electrical (for Heating Electrical and Electronic Equipment) (No Superseding Document)
- QPL-83528 - Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, Emi/Rfi, General Specification For
- QPL-83531 - Delay Lines, Passive, General Specification for
- QPL-83532 - Delay Lines, Active, General Specification for
- QPL-83532-5 - Delay Lines, Active
- QQ-M-60 - Magnet Materials, Permanent +Cancelled, 1966, No S/S Document+
- SS-EN-1279-3 - Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
- W-C-440 - Clip, Electrical, General Specification For