Document Center List of Standards on Copper Products
ICS Code 77.150.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-B100 - Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
- ASTM-B101 - Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
- ASTM-B103 - Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
- ASTM-B111M - Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock [Metric]
- ASTM-B115 - Standard Specification for Electrolytic Copper Cathode
- ASTM-B121 - Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
- ASTM-B122 - Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
- ASTM-B124 - Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
- ASTM-B124M - Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes [Metric] (Withdrawn 2000)
- ASTM-B129 - Standard Specification for Cartridge Brass Cartridge Case Cups
- ASTM-B130 - Standard Specification for Commercial Bronze Strip for Bullet Jackets
- ASTM-B131 - Standard Specification for Copper Alloy Bullet Jacket Cups
- ASTM-B134 - Standard Specification for Brass Wire
- ASTM-B138 - Standard Specification for Manganese Bronze Rod, Bar, and Shapes
- ASTM-B138M - Standard Specification for Manganese Bronze Rod, Bar and Shapes [Metric] (Withdrawn 2001)
- ASTM-B139 - Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
- ASTM-B139M - Standard Specification for Phosphor Bronze Rod, Bar, and Shapes [Metric] (Withdrawn 2001)
- ASTM-B140 - Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
- ASTM-B140M - Standard Specification for Copper-Zinc-Lead (Leaded Red Brass or Hardware Bronze) Rod, Bar, and Shapes [Metric] (Withdrawn 1997)
- ASTM-B151 - Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
- ASTM-B151M - Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar [Metric] (Withdrawn 2001)
- ASTM-B152 - Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
- ASTM-B152M - Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar [Metric] (Withdrawn 2000)
- ASTM-B159 - Standard Specification for Phosphor Bronze Wire
- ASTM-B159M - Standard Specification for Phosphor Bronze Wire [Metric] (Withdrawn 2001)
- ASTM-B16 - Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
- ASTM-B16M - Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines [Metric] (Withdrawn 2000)
- ASTM-B170 - Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
- ASTM-B171 - Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
- ASTM-B171M - Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers and Heat Exchangers [Metric] (Withdrawn 1999)
- ASTM-B176 - Standard Specification for Copper-Alloy Die Castings
- ASTM-B187 - Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
- ASTM-B188 - Standard Specification for Seamless Copper Bus Pipe and Tube
- ASTM-B19 - Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
- ASTM-B194 - Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
- ASTM-B196 - Standard Specification for Copper-Beryllium Alloy Rod and Bar
- ASTM-B196M - Standard Specification For Copper-Beryllium Alloy Rod and Bar (Metric)
- ASTM-B197 - Standard Specification for Copper-Beryllium Alloy Wire
- ASTM-B197M - Standard Specification for Copper-Beryllium Alloy Wire [Metric] (Withdrawn 1998)
- ASTM-B2 - Standard Specification for Medium-Hard-Drawn Copper Wire
- ASTM-B206 - Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
- ASTM-B206M - Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) Wire and Copper-Nickel Alloy Wire [Metric] (Withdrawn 1997)
- ASTM-B208 - Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
- ASTM-B21 - Standard Specification for Naval Brass Rod, Bar, and Shapes
- ASTM-B216 - Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
- ASTM-B21M - Standard Specification for Naval Brass Rod, Bar, and Shapes [Metric] (Withdrawn 2001)
- ASTM-B22 - Standard Specification for Bronze Castings for Bridges and Turntables
- ASTM-B248 - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
- ASTM-B248M - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
- ASTM-B249 - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
- ASTM-B249M - Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings [Metric] (Withdrawn 2000)
- ASTM-B250 - Standard Specification for General Requirements for Wrought Copper Alloy Wire
- ASTM-B250M - Standard Specification for General Requirements for Wrought Copper Alloy Wire [Metric] (Withdrawn 2001)
- ASTM-B251 - Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
- ASTM-B251M - Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric] (Withdrawn 2017)
- ASTM-B271 - Standard Specification for Copper-Base Alloy Centrifugal Castings
- ASTM-B272 - Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
- ASTM-B283 - Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
- ASTM-B298 - Standard Specification for Silver-Coated Soft or Annealed Copper Wire
- ASTM-B3 - Standard Specification for Soft or Annealed Copper Wire
- ASTM-B30 - Standard Specification for Copper Alloys in Ingot Form
- ASTM-B301 - Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
- ASTM-B301M - Standard Specification for Free-Cutting Copper Rod and Bar [Metric] (Withdrawn 1999)
- ASTM-B302 - Standard Specification for Threadless Copper Pipe, Standard Sizes
- ASTM-B315 - Standard Specification for Seamless Copper Alloy Pipe and Tube
- ASTM-B355 - Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
- ASTM-B36 - Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
- ASTM-B369 - Standard Specification for Copper-Nickel Alloy Castings
- ASTM-B370 - Standard Specification for Copper Sheet and Strip for Building Construction
- ASTM-B372 - Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
- ASTM-B379 - Standard Specification for Phosphorized Coppers—Refinery Shapes
- ASTM-B402 - Specification for Copper-Nickel Alloy Plate and Sheet for Pressure Vessels (Withdrawn 1986)
- ASTM-B402M - Specification for Copper-Nickel Alloy Plate and Sheet for Pressure Vessels (Metric) (Withdrawn 1986)
- ASTM-B411 - Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
- ASTM-B412 - Standard Specification for Copper-Nickel-Silicon Alloy Wire (Withdrawn 2000)
- ASTM-B42 - Standard Specification for Seamless Copper Pipe, Standard Sizes
- ASTM-B422 - Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
- ASTM-B427 - Standard Specification for Gear Bronze Alloy Castings
- ASTM-B43 - Standard Specification for Seamless Red Brass Pipe, Standard Sizes
- ASTM-B432 - Standard Specification for Copper and Copper Alloy Clad Steel Plate
- ASTM-B441 - Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
- ASTM-B447 - Standard Specification for Welded Copper Tube
- ASTM-B451 - Specification for Copper Foil, Strip, and Sheet for Printed Circuits and Carrier Tapes (Withdrawn 1998)
- ASTM-B453 - Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
- ASTM-B455 - Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
- ASTM-B464 - Standard Specification for Welded UNS N08020 Alloy Pipe
- ASTM-B465 - Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
- ASTM-B466 - Standard Specification for Seamless Copper-Nickel Pipe and Tube
- ASTM-B466M - Standard Specification for Seamless Copper-Nickel Pipe and Tube [Metric] (Withdrawn 1998)
- ASTM-B467 - Standard Specification for Welded Copper-Nickel Pipe
- ASTM-B468 - Standard Specification for Welded UNS N08020 Alloy Tubes
- ASTM-B469 - Standard Specification for Seamless Copper-Alloy Tubes for Pressure Applications (Withdrawn 2000)
- ASTM-B5 - Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
- ASTM-B505 - Standard Specification for Copper Alloy Continuous Castings
- ASTM-B508 - Standard Specification for Copper Alloy Strip for Flexible Metal Hose
- ASTM-B534 - Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
- ASTM-B543 - Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
- ASTM-B552 - Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
- ASTM-B565 - Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
- ASTM-B569 - Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
- ASTM-B570 - Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
- ASTM-B584 - Standard Specification for Copper Alloy Sand Castings for General Applications
- ASTM-B587 - Standard Specification for Welded Brass Tube
- ASTM-B591 - Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
- ASTM-B592 - Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
- ASTM-B593 - Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- ASTM-B601 - Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
- ASTM-B608 - Standard Specification for Welded Copper-Alloy Pipe
- ASTM-B61 - Standard Specification for Steam or Valve Bronze Castings
- ASTM-B62 - Standard Specification for Composition Bronze or Ounce Metal Castings
- ASTM-B623 - Specification for Tough-Pitch Fire-Refined High-Conductivity Copper-Refinery Shapes (Withdrawn 1996)
- ASTM-B640 - Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
- ASTM-B641 - Standard Specification for Seamless and Welded Copper Distribution Tube (Type D) (Withdrawn 1996)
- ASTM-B643 - Standard Specification for Copper-Beryllium Alloy Seamless Tube
- ASTM-B66 - Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
- ASTM-B68 - Standard Specification for Seamless Copper Tube, Bright Annealed
- ASTM-B68M - Standard Specification for Seamless Copper Tube, Bright Annealed [Metric] (Withdrawn 2011)
- ASTM-B694 - Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
- ASTM-B702 - Standard Specification for Copper-Tungsten Electrical Contact Material
- ASTM-B706 - Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
- ASTM-B716 - Specification for Welded Copper Water Tube (Withdrawn 1994)
- ASTM-B716M - Specification for Welded Copper Water Tube (Metric) (Withdrawn 1994)
- ASTM-B740 - Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
- ASTM-B743 - Standard Specification for Seamless Copper Tube in Coils
- ASTM-B747 - Standard Specification for Copper-Zirconium Alloy Sheet and Strip
- ASTM-B75 - Standard Specification for Seamless Copper Tube
- ASTM-B754 - Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
- ASTM-B75M - Standard Specification for Seamless Copper Tube (Metric) (Withdrawn 2011)
- ASTM-B763 - Standard Specification for Copper Alloy Sand Castings for Valve Applications
- ASTM-B768 - Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
- ASTM-B770 - Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
- ASTM-B806 - Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM-B820 - Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
- ASTM-B824 - Standard Specification for General Requirements for Copper Alloy Castings
- ASTM-B876 - Standard Specification for Borated Dispersion Strengthened Copper Plate, Sheet, Strip, and Rolled Bar for Nuclear Application (Withdrawn 2002)
- ASTM-B882 - Standard Specification for Pre-Patinated Copper for Architectural Applications
- ASTM-B927 - Standard Specification for Brass Rod, Bar, and Shapes
- ASTM-B929 - Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
- ASTM-B937 - Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
- ASTM-B938 - Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510) (Withdrawn 2010)
- ASTM-B944 - Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
- ASTM-B950 - Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
- ASTM-B96 - Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
- ASTM-B967 - Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
- ASTM-B968 - Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
- ASTM-B96M - Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels [Metric] (Withdrawn 1999)
- ASTM-B97 - Specification for Copper-Silicon Alloy Plate, Sheet Strip and Rolled Bar for General Purposes (Withdrawn 1981)
- ASTM-B98 - Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
- ASTM-B981 - Standard Specification for Low-Leaded Brass Rod, Bar, Wire, and Shapes
- ASTM-B98M - Standard Specification for Copper-Silicon Alloy Rod, Bar, and Shapes [Metric] (Withdrawn 1998)
- ASTM-D2861 - Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics (Withdrawn 2020)
- ASTM-D849 - Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
- ASTM-E272 - Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
- ASTM-F68 - Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
- ASTM-F96 - Standard Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms
BSI:
- BS-1400 - Copper Alloy Ingots & Copper Alloy & High Conductivity Copper Castings, British Standard S
- BS-1434 - Specification for copper for electrical purposes: copper sections in bars, blanks and segments for commutators
- BS-1977 - Specification for high conductivity copper tubes for electrical purposes
- BS-2871-2 - Specification for copper and copper alloys. Tubes. Tubes for general purposes
- BS-2871-3 - Specification for copper and copper alloys. Tubes. Tubes for heat exchangers
- BS-2872 - Specification for Copper & Copper Alloy Forging Stock & Forgings
- BS-2874 - Specification for copper and copper alloy rods and sections (other than forging stock)
- BS-3071 - Specification for nickel-copper alloy castings
- BS-3839 - Specification for oxygen-free high-conductivity copper for electronic tubes and semiconductor devices
- BS-5624 - Code of practice for the lining of vessels and equipment for chemical processes: copper and copper alloys
- BS-6017 - Specification for copper refinery shapes
- BS-EN-1172 - Copper and copper alloys. Sheet and strip for building purposes
- BS-EN-12163 - Copper and copper alloys. Rod for general purposes
- BS-EN-12164 - Copper and copper alloys. Rod for free machining purposes
- BS-EN-12165 - Copper and copper alloys. Wrought and unwrought forging stock
- BS-EN-12166 - Copper and copper alloys. Wire for general purposes
- BS-EN-12167 - Copper and copper alloys. Profiles and bars for general purposes
- BS-EN-12168 - Copper and copper alloys. Hollow rod for free machining purposes
- BS-EN-12168-TC - Tracked Changes. Copper and copper alloys. Hollow rod for free machining purposes
- BS-EN-12420 - Copper and copper alloys. Forgings
- BS-EN-12451 - Copper and copper alloys. Seamless, round tubes for heat exchangers
- BS-EN-12452 - Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers
- BS-EN-12735-1 - Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration
- BS-EN-12735-2 - Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration
- BS-EN-12735-2-TC - Tracked Changes. Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration
- BS-EN-12861-TC - Tracked Changes. Copper and copper alloys. Scrap
- BS-EN-13147 - Copper and copper alloys. Determination of residual stresses in the border area of a slit strip
- BS-EN-13148 - Copper and copper alloys. Hot-dip tinned strip
- BS-EN-13347 - Copper and copper alloys. Rod and wire for welding and braze welding
- BS-EN-13349 - Copper and copper alloys. Pre-insulated copper tubes with solid covering
- BS-EN-13599 - Copper and copper alloys. Copper plate, sheet and strip for electrical purposes
- BS-EN-13600 - Copper and copper alloys. Seamless copper tubes for electrical purposes
- BS-EN-13601 - Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
- BS-EN-13602 - Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors
- BS-EN-13603 - Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
- BS-EN-13603-TC - Tracked Changes. Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
- BS-EN-13604 - Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper
- BS-EN-13605 - Copper and copper alloys. Copper profiles and profiled wire for electrical purposes
- BS-EN-13605-TC - Tracked Changes. Copper and copper alloys. Copper profiles and profiled wire for electrical purposes
- BS-EN-14436 - Copper and copper alloys. Electrolytically tinned strip
- BS-EN-14977 - Copper and copper alloys. Detection of tensile stress. 5% ammonia test
- BS-EN-1654 - Copper and copper alloys. Strip for springs and connectors
- BS-EN-17263 - Copper and copper alloys. Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil
- BS-EN-1971-1 - Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes
- BS-EN-1971-2 - Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes
- BS-EN-1976 - Copper and copper alloys. Cast unwrought copper products
- BS-EN-1977 - Copper and copper alloys. Copper drawing stock (wire rod)
- BS-EN-1978-TC - Tracked Changes. Copper and copper alloys. Copper cathodes
- BS-EN-1982 - Copper and copper alloys. Ingots and castings
- BS-EN-50149 - Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires
- BS-EN-504 - Roofing products from metal sheet. Specification for fully supported roofing products of copper sheet
- BS-EN-723 - Copper and copper alloys. Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
- DD-CEN-13388 - Copper and copper alloys. Compendium of compositions and products
- PD-6641 - Copper & Copper Alloys - Compendium of Compositions and Products
- PD-CEN-13388 - Copper and copper alloys. Compendium of compositions and products
ISO:
- ISO-1187 - Special wrought copper alloys -- Chemical composition and forms of wrought products
- ISO-1336 - Wrought coppers (having minimum copper contents of 97,5 %) -- Chemical composition and forms of wrought products
- ISO-1337 - Wrought coppers (having minimum copper contents of 99,85 %) -- Chemical composition and forms of wrought products
- ISO-1428 - Fire-Refined High-Conductivity Tough Pitch Copper - Refineryshapes
- ISO-1429 - Fire-refined tough pitch copper refinery shapes
- ISO-1430 - Phosphorus-deoxidized copper -- Refinery shapes
- ISO-197-1 - Copper and copper alloys - Terms and definitions - Part 1 : Materials
- ISO-197-2 - Copper and copper alloys - Terms and definitions - Part 2 : Unwrought products (Refinery shapes)
- ISO-197-3 - Copper and copper alloys - Terms and definitions - Part 3 : Wrought products
- ISO-197-4 - Copper and copper alloys - Terms and definitions - Part 4 : Castings
- ISO-431 - Copper refinery shapes
- ISO-7758 - Wrought Copper and Copper Alloys - Drawn Square Bars - Symmetric Plus and Minus Tolerances On
Other SDOs:
- DIN-EN-13599 - Copper and copper alloys - Copper plate, sheet and strip for electrical purposes; German version EN 13599:2014
- DIN-EN-13600 - Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013
- DIN-EN-13601 - Copper and copper alloys - Copper rod, bar and wire for general electrical purposes; German version EN 13601:2013
- DIN-EN-13602 - Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors; German version EN 13602:2013
- DIN-EN-13603 - Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes; German version EN 13603:2013
- DIN-EN-13604 - Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper; German version EN 13604:2013
- DIN-EN-13605 - Copper and copper alloys - Copper profiles and profiled wire for electrical purposes; German version EN 13605:2013
- DIN-EN-14436 - Copper & Copper Alloys - Electrolytically Tinned Strip
- DIN-EN-14977 - Copper & Copper Alloys - Detection of Tensile Stress - 5% Ammonia Test
- EN-1172 - Copper and copper alloys - Sheet and strip for building purposes
- EN-12163 - Copper and copper alloys - Rod for general purposes
- EN-12164 - Copper and copper alloys - Rod for free machining purposes
- EN-12165 - Copper and copper alloys - Wrought and unwrought forging stock
- EN-12166 - Copper and copper alloys - Wire for general purposes
- EN-12167 - Copper and copper alloys - Profiles and bars for general purposes
- EN-12168 - Copper and copper alloys - Hollow rod for free machining purposes
- EN-12420 - Copper and copper alloys - Forgings
- EN-12450 - Copper and copper alloys - Seamless, round copper capillary tubes
- EN-12451 - Copper and copper alloys - Seamless, round tubes for heat exchangers
- EN-12452 - Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
- EN-12735-1 - Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
- EN-12735-2 - Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
- EN-13148 - Copper & Copper Alloys - Hot-Dip Tinned Strip
- EN-13599 - Copper and copper alloys - Copper plate, sheet and strip for electrical purposes
- EN-13600 - Copper and copper alloys - Seamless copper tubes for electrical purposes
- EN-13601 - Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
- EN-13602 - Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
- EN-13603 - Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
- EN-13604 - Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
- EN-13605 - Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
- EN-14436 - Copper & Copper Alloys - Electrolytically Tinned Strip
- EN-14977 - Copper & Copper Alloys - Detection of Tensile Stress - 5 % Ammonia Test
- EN-17263 - Copper and copper alloys - Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil
- EN-1971-1 - Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- EN-1971-2 - Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
- EN-1976 - Copper and copper alloys - Cast unwrought copper products
- EN-1977 - Copper and copper alloys - Copper drawing stock (wire rod)
- EN-1982 - Copper and copper alloys - Ingots and castings
- EN-504 - Roofing Products From Metal Sheet, Specification for Fully Supported Roofing Products
- EN-723 - Copper & Copper Alloys, Combustion Method for Determination of the Carbon Content On
- JIS-B-2011-1 - Bronze, gate, globe, angle, and check valves (Amendment 1)
- JIS-H-2123 - Copper billets and cakes
- JIS-H-3100 - Copper and copper alloy sheets, plates and strips
- JIS-H-3110 - Phosphor bronze and nickel silver sheets, plates and strips
- JIS-H-3110-JAPANESE - JAPANESE LANGUAGE - Phosphor bronze and nickel silver sheets, plates and strips
- JIS-H-3130 - Copper beryllium alloy, copper titanium alloy, phosphor bronze, copper-nickel-tin alloy and nickel silver sheets, plates and strips for springs
- JIS-H-3130-JAPANESE - JAPANESE LANGUAGE - Copper beryllium alloy, copper titanium alloy, phosphor bronze, copper-nickel-tin alloy and nickel silver sheets, plates and strips for springs
- JIS-H-3250-AM1 - Copper and copper alloy rods and bars (Amendment 1)
- JIS-H-3330 - Plastic covered copper tubes
- JIS-H-5120 - Copper and copper alloy castings
- JIS-H-5121 - Copper alloy continuous castings
- SIS-CEN/TS-13388 - Copper and copper alloys - Compendium of compositions and products
- SS-EN-1172 - Copper and copper alloys - Sheet and strip for building purposes
- SS-EN-12163 - Copper and copper alloys - Rod for general purposes
- SS-EN-12164 - Copper and copper alloys - Rod for free machining purposes
- SS-EN-12164-AM1 - Copper and copper alloys - Rod for free machining purposes
- SS-EN-12165 - Copper and copper alloys - Wrought and unwrought forging stock
- SS-EN-12166 - Copper and copper alloys - Wire for general purposes
- SS-EN-12167 - Copper and copper alloys - Profiles and bars for general purposes
- SS-EN-12168 - Copper and copper alloys - Hollow rod for free machining purposes
- SS-EN-12168-AM1 - Copper and copper alloys - Hollow rod for free machining purposes
- SS-EN-12384 - Copper and copper alloys - Determination of spring bending limit on strip
- SS-EN-12420 - Copper and copper alloys - Forgings
- SS-EN-12450 - Copper and copper alloys - Seamless, round copper capillary tubes
- SS-EN-12451 - Copper and copper alloys - Seamless, round tubes for heat exchangers
- SS-EN-12452 - Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
- SS-EN-12861 - Copper and copper alloys - Scrap
- SS-EN-13147 - Copper and copper alloys - Determination of residual stresses in the border area of slit strip
- SS-EN-13148 - Copper and copper alloys - Hot-dip tinned strip
- SS-EN-13347 - Copper and copper alloys - Rod and wire for welding and braze welding
- SS-EN-13599 - Copper and copper alloys - Copper plate, sheet and strip for electrical purposes
- SS-EN-13600 - Copper and copper alloys - Seamless copper tubes for electrical purposes
- SS-EN-13601 - Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
- SS-EN-13602 - Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
- SS-EN-13603 - Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
- SS-EN-13604 - Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
- SS-EN-13605 - Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
- SS-EN-14436 - Copper and copper alloys - Electrolytically tinned strip
- SS-EN-1652 - Copper and copper alloys - Plate, sheet, strip and circles for general purposes
- SS-EN-1653 - Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units
- SS-EN-1654 - Copper and copper alloys - Strip for springs and connectors
- SS-EN-17263 - Copper and copper alloys - Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil
- SS-EN-1758 - Copper and copper alloys - Strip for lead frames
- SS-EN-1971 - Copper and copper alloys - Eddy current test for tubes
- SS-EN-1971-1 - Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
- SS-EN-1971-2 - Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
- SS-EN-1976 - Copper and copper alloys - Cast unwrought copper products
- SS-EN-1977 - Copper and copper alloys - Copper drawing stock (wire rod)
- SS-EN-1978 - Copper and copper alloys - Copper cathodes
- SS-EN-1982 - Copper and copper alloys - Ingots and castings
- SS-EN-723 - Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
- UNE-EN-12163 - Copper and copper alloys - Rod for general purposes
- UNE-EN-12165 - Copper and copper alloys - Wrought and unwrought forging stock
- UNE-EN-12166 - Copper and copper alloys - Wire for general purposes