Document Center List of Standards on Plant Care Equipment
ICS Code 65.060.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-E549 - Standard Guide for Preparing Field Sprayer Calibration Procedures
- ASTM-E550 - Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
- ASTM-E641 - Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture (Withdrawn 2021)
- ASTM-E642 - Standard Practice for Determining Application Rates and Distribution Patterns from Aerial Application Equipment
- ASTM-E842 - Specification for Lawn Buildings (Withdrawn 1990)
BSI:
- BS-4115 - Specification for compression knapsack sprayers
- BS-6356-10 - Spraying equipment for crop protection
- BS-6356-11 - Spraying equipment for crop protection
- BS-6356-14 - Spraying equipment for crop protection
- BS-6356-15 - Spraying equipment for crop protection
- BS-6356-16 - Spraying equipment for crop protection
- BS-6356-4 - Spraying equipment for crop protection
- BS-7411 - Specification for lever operated knapsack sprayers
- BS-8412 - Equipment for crop protection. Performance requirements for application systems used to make spatially variable applications to field crops. Specification
- BS-EN-12761-1 - Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection
- BS-EN-12761-2 - Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Field crop sprayers
- BS-EN-12761-3 - Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Air-assisted sprayers for bush and tree crops
- BS-EN-13790-1 - Agricultural machinery. Sprayers. Inspection of sprayers in use
- BS-EN-13790-2 - Agricultural machinery. Sprayers. Inspection of sprayers in use
- BS-EN-ISO-1401 - Rubber hoses for agricultural spraying
- BS-EN-ISO-1401-TC - Tracked Changes. Rubber hoses for agricultural spraying
- BS-EN-ISO-16119-1 - Agricultural and forestry machinery. Environmental requirements for sprayers
- BS-EN-ISO-16119-2 - Agricultural and forestry machinery. Environmental requirements for sprayers
- BS-EN-ISO-16119-3 - Agricultural and forestry machinery. Environmental requirements for sprayers
- BS-EN-ISO-16119-4 - Agricultural and forestry machinery. Environmental requirements for sprayers
- BS-EN-ISO-16119-5 - Agricultural and forestry machinery. Environmental requirements for sprayers
- BS-EN-ISO-16122-1 - Agricultural and forestry machinery. Inspection of sprayers in use
- BS-EN-ISO-16122-2 - Agricultural and forestry machinery. Inspection of sprayers in use
- BS-EN-ISO-16122-3 - Agricultural and forestry machinery. Inspection of sprayers in use
- BS-EN-ISO-16122-4 - Agricultural and forestry machines. Inspection of sprayers in use
- BS-EN-ISO-16122-5 - Agricultural and forestry machines. Inspection of sprayers in use
- BS-EN-ISO-19932-1 - Equipment for crop protection. Knapsack sprayers
- BS-EN-ISO-19932-2 - Equipment for crop protection. Knapsack sprayers
- BS-EN-ISO-28139 - Equipment for crop protection. Knapsack combustion engine-driven airblast sprayers. Safety and environmental requirements and test methods
- BS-EN-ISO-28139-TC - Tracked Changes. Equipment for crop protection. Knapsack combustion engine-driven airblast sprayers. Safety and environmental requirements and test methods
- BS-EN-ISO-4254-6 - Agricultural machinery. Safety
- BS-ISO-10625 - Equipment for crop protection. Sprayer nozzles. Colour coding for identification
- BS-ISO-10625-TC - Tracked Changes. Equipment for crop protection. Sprayer nozzles. Colour coding for identification
- BS-ISO-10988 - Equipment for crop protection. Knapsack motorized air-assisted sprayers. Test methods and performance limits
- BS-ISO-12809 - Crop protection equipment. Reciprocating positive displacement pumps and centrifugal pumps. Test method
- BS-ISO-12809-TC - Tracked Changes. Crop protection equipment. Reciprocating positive displacement pumps and centrifugal pumps. Test method
- BS-ISO-16236 - Crop protection equipment. Test method for the determination of drainable volume and its concentration
- BS-ISO-19732 - Equipment for crop protection. Sprayer filters. Colour coding for identification
- BS-ISO-19932-1 - Equipment for crop protection. Knapsack sprayers
- BS-ISO-19932-2 - Equipment for crop protection. Knapsack sprayers
- BS-ISO-21191 - Equipment for crop protection. Closed transfer systems (CTS). Performance specification
- BS-ISO-21278-1 - Equipment for crop protection. Induction hoppers
- BS-ISO-21278-2 - Equipment for crop protection. Induction hoppers
- BS-ISO-22369-1 - Crop protection equipment. Drift classification of spraying equipment
- BS-ISO-22522 - Crop protection equipment. Field measurement of spray distribution in tree and bush crops
- BS-ISO-22856 - Equipment for crop protection. Methods for the laboratory measurement of spray drift. Wind tunnels
- BS-ISO-22866 - Equipment for crop protection. Methods for field measurement of spray drift
- BS-ISO-23117-1 - Agricultural and forestry machinery. Unmanned aerial spraying systems
- BS-ISO-24253-1 - Crop protection equipment. Spray deposition test for field crop
- BS-ISO-24253-2 - Crop protection equipment. Spray deposition test for field crop
- BS-ISO-25358 - Crop protection equipment. Droplet-size spectra from atomizers. Measurement and classification
- BS-ISO-4254-16 - Agricultural machinery. Safety
- BS-ISO-4444 - Agricultural sprayers. Recording of spray drift parameters
- BS-ISO-5681 - Equipment for crop protection. Vocabulary
- BS-ISO-5682-1 - Equipment for crop protection. Spraying equipment
- BS-ISO-5682-2 - Equipment for crop protection. Spraying equipment
- BS-ISO-5682-3 - Equipment for crop protection. Spraying equipment
- BS-ISO-5682-4 - Equipment for crop protection. Spraying equipment
- BS-ISO-9898 - Equipment for crop protection. Test methods for air-assisted sprayers for bush and tree crops
- PD-ISO-11356 - Crop protection equipment. Traceability. Spray parameter recording
ISO:
- ISO-10625 - Equipment for crop protection - Sprayer nozzles - Colour coding for identification
- ISO-10626 - Equipment for crop protection - Sprayers - Connecting dimensions for nozzles with bayonet fixing
- ISO-10627-1 - Agricultural sprayers - Data sheet - Part 1: Typical layout
- ISO-10627-2 - Hydraulic agricultural sprayers - Data sheets - Part 2: Technical specifications related to components
- ISO-10988 - Equipment for crop protection - Knapsack motorized air-assisted sprayers - Test methods and performance limits
- ISO-11356 - Crop protection equipment - Traceability - Spray parameter recording
- ISO-12809 - Crop protection equipment - Reciprocating positive displacement pumps and centrifugal pumps - Test method
- ISO-13440 - Equipment for crop protection - Agricultural sprayers - Determination of the volume of total residual
- ISO-13441-1 - Air-assisted agricultural sprayers - Data sheets - Part 1: Typical layout
- ISO-13441-2 - Air-assisted agricultural sprayers - Data sheets - Part 2: Technical specifications related to components
- ISO-1401 - Rubber hoses for agricultural spraying
- ISO-14131 - Agricultural sprayers - Boom steadiness - Test methods
- ISO-14710 - Equipment for crop protection - Air-assisted sprayers - Dimensions of nozzle swivel nuts
- ISO-16119-1 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General
- ISO-16119-2 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers
- ISO-16119-3 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops
- ISO-16119-4 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers
- ISO-16119-5 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 5: Aerial spray systems
- ISO-16122-1 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General
- ISO-16122-2 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 2: Horizontal boom sprayers
- ISO-16122-3 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops
- ISO-16122-4 - Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers
- ISO-16122-5 - Agricultural and forestry machines - Inspection of sprayers in use - Part 5: Aerial spray systems
- ISO-16236 - Crop protection equipment - Test method for the determination of drainable volume and its concentration
- ISO-19732 - Equipment for crop protection - Sprayer filters - Colour coding for identification
- ISO-19932-1 - Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements
- ISO-19932-2 - Equipment for crop protection - Knapsack sprayers - Part 2: Test methods
- ISO-21191 - Equipment for crop protection - Closed transfer systems (CTS) - Performance specification
- ISO-21278-1 - Equipment for crop protection - Induction hoppers - Part 1: Test methods
- ISO-21278-2 - Equipment for crop protection - Induction hoppers - Part 2: General requirements and performance limits
- ISO-22368-1 - Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 1: Internal cleaning of complete sprayers
- ISO-22368-2 - Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 2: External cleaning of sprayers
- ISO-22368-3 - Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 3: Internal cleaning of tank
- ISO-22369-1 - Crop protection equipment - Drift classification of spraying equipment - Part 1: Classes
- ISO-22369-2 - Crop protection equipment - Drift classification of spraying equipment - Part 2: Classification of field crop sprayers by field measurements
- ISO-22401 - Equipment for crop protection - Method for measurement of potential spray drift from horizontal boom sprayers by the use of a test bench
- ISO-22522 - Crop protection equipment - Field measurement of spray distribution in tree and bush crops
- ISO-22763 - Equipment for crop protection - Sprayers - Demonstration track for field crop sprayers
- ISO-22856 - Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels
- ISO-22866 - Equipment for crop protection - Methods for field measurement of spray drift
- ISO-23117-1 - Agricultural and forestry machinery - Unmanned aerial spraying systems - Part 1: Environmental requirements
- ISO-24253-1 - Crop protection equipment - Spray deposition test for field crop - Part 1: Measurement in a horizontal plane
- ISO-24253-2 - Crop protection equipment - Spray deposition test for field crop - Part 2: Measurement in a crop
- ISO-25358 - Crop protection equipment - Droplet-size spectra from atomizers - Measurement and classification
- ISO-28139 - Equipment for crop protection - Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and test methods
- ISO-28139-AM1 - - Amendment 1: Equipment for crop protection - Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and test methods - Amendment 1
- ISO-4102 - Equipment for crop protection - Sprayers - Connection threading
- ISO-4254-16 - Agricultural machinery - Safety - Part 16: Portable agricultural grain augers
- ISO-4254-6 - Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors
- ISO-4444 - Agricultural sprayers - Recording of spray drift parameters
- ISO-5681 - Equipment for crop protection - Vocabulary
- ISO-5682-1 - Equipment for crop protection - Spraying equipment - Part 1: Test methods for sprayer nozzles
- ISO-5682-2 - Equipment for crop protection - Spraying equipment - Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayers
- ISO-5682-3 - Equipment for crop protection - Spraying equipment - Part 3: Test method to assess the performance of volume/area adjustment systems
- ISO-5682-4 - Equipment for crop protection - Spraying equipment - Part 4: Test methods for agitation of sprayer tanks
- ISO-6686 - Equipment for crop protection - Antidrip devices - Determination of performance
- ISO-6720 - Agricultural machinery - Equipment for sowing, planting, distributing fertilizers and spraying - Recommended working widths
- ISO-8169 - Equipment for crop protection - Sprayers - Connecting dimensions for nozzles and manometers
- ISO-8524 - Equipment for distributing granulated pesticides or herbicides - Test method
- ISO-9357 - Equipment for crop protection - Agricultural sprayers - Tank nominal volume and filling hole diameter
- ISO-9898 - Equipment for crop protection - Test methods for air-assisted sprayers for bush and tree crops
Other SDOs:
- DIN-EN-12761-2 - Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors; Environmental protection - Part 2: Field crop sprayers; German version EN 12761-2:2001
- DIN-EN-12761-3 - Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors; Environmental protection - Part 3: Air-assisted sprayers for bush and tree crops; German version EN 12761-3:2001
- DIN-EN-13790-1 - Agricultural machinery - Sprayers - Inspection of sprayers in use - Part 1: Field crop sprayers; German version EN 13790-1:2003
- DIN-EN-13790-2 - Agricultural machinery - Sprayers - Inspection of sprayers in use - Part 2: Air-assisted sprayers for bush and tree crops
- DIN-EN-ISO-4167 - Polyolefin Agricultural Twines
- EN-ISO-1401 - Rubber hoses for agricultural spraying
- EN-ISO-16119-1 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013)
- EN-ISO-16119-2 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013)
- EN-ISO-16119-3 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)
- EN-ISO-16119-4 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers
- EN-ISO-16122-1 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General
- EN-ISO-16122-2 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 2: Horizontal boom sprayers
- EN-ISO-16122-3 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops
- EN-ISO-16122-4 - Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers
- EN-ISO-19932-1 - Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013)
- EN-ISO-19932-2 - Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013)
- EN-ISO-28139 - Agricultural & Forestry Machinery - Knapsack Combustion-Engine-Driven Mistblowers - Sa
- EN-ISO-4254-6 - Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)
- JIS-B-9212 - Bush cutter saws
- SIS-ISO/TS-11356 - Crop protection equipment - Traceability - Spray parameter recording (ISO/TS 11356:2011, IDT)
- SS-EN-12761-1 - Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Environmental protection - Part 1: General
- SS-EN-12761-2 - Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Environmental protection - Part 2: Field crop sprayers
- SS-EN-12761-3 - Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Environmental protection - Part 3: Air-assisted sprayers for bush and tree crops
- SS-EN-13790-1 - Agricultural machinery - Sprayers - Inspection of sprayers in use - Part 1: Field crop sprayers
- SS-EN-13790-2 - Agricultural machinery - Sprayers - Inspection of sprayers in use - Part 2: Air-assisted sprayers for bush and tree crops
- SS-EN-907 - Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Safety
- SS-EN-ISO-11925-2 - Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO/FDIS 11925-2:2019)
- SS-EN-ISO-1401 - Rubber hoses for agricultural spraying (ISO 1401:2016)
- SS-EN-ISO-16119-1 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013)
- SS-EN-ISO-16119-2 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013)
- SS-EN-ISO-16119-3 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)
- SS-EN-ISO-16119-4 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)
- SS-EN-ISO-16122-1 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General (ISO 16122-1:2015)
- SS-EN-ISO-16122-2 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 2: Horizontal boom sprayers (ISO 16122-2:2015)
- SS-EN-ISO-16122-3 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops (ISO 16122-3:2015)
- SS-EN-ISO-16122-4 - Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers (ISO 16122-4:2015)
- SS-EN-ISO-16122-5 - Agricultural and forestry machines - Inspection of sprayers in use - Part 5: Aerial spray systems (ISO 16122-5:2020)
- SS-EN-ISO-19932-1 - Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013)
- SS-EN-ISO-19932-2 - Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013)
- SS-EN-ISO-28139 - Equipment for crop protection - Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and test methods (ISO 28139:2019)
- SS-EN-ISO-4254-6 - Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)
- SS-EN-ISO-4254-6-AM11 - Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)
- SS-ISO-10625 - Equipment for crop protection - Sprayer nozzles - Colour coding for identification (ISO 10625:2018, IDT)
- SS-ISO-10988 - Equipment for crop protection - Knapsack motorized air-assisted sprayers - Test methods and performance limits (ISO 10988:2011, IDT)
- SS-ISO-12809 - Crop protection equipment - Reciprocating positive displacement pumps and centrifugal pumps - Test method (ISO 12809:2020, IDT)
- SS-ISO-13440 - Equipment for crop protection - Agricultural sprayers - Determination of the volume of total residual
- SS-ISO-14131 - Agricultural sprayers - Boom steadiness - Test methods (ISO 14131:2005, IDT)
- SS-ISO-16236 - Crop protection equipment - Test method for the determination of drainable volume and its concentration (ISO 16236:2013, IDT)
- SS-ISO-19932-1 - Equipment for crop protection - Knapsack sprayers - Part 1: Requirements and test methods (ISO 19932-1:2006, IDT)
- SS-ISO-19932-2 - Equipment for crop protection - Knapsack sprayers - Part 2: Performance limits (ISO 19932-2:2006, IDT)
- SS-ISO-21278-1 - Equipment for crop protection - Induction hoppers - Part 1: Test methods (ISO 21278-1:2008, IDT)
- SS-ISO-21278-2 - Equipment for crop protection - Induction hoppers - Part 2: General requirements and performance limits (ISO 21278-2:2008, IDT)
- SS-ISO-22368-1 - Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 1: Internal cleaning of complete sprayers (ISO 22368:2004, IDT)
- SS-ISO-22368-2 - Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 2: External cleaning of sprayers (ISO 22368-2:2004, IDT)
- SS-ISO-22368-3 - Crop protection equipment - Test methods for the evaluation of cleaning systems - Part 3: Internal cleaning of tank (ISO 22368-3:2004, IDT)
- SS-ISO-22369-1 - Crop protection equipment - Drift classification of spraying equipment - Part 1: Classes (ISO 22369-1:2006, IDT)
- SS-ISO-22369-2 - Crop protection equipment - Drift classification of spraying equipment - Part 2: Classification of field crop sprayers by field measurements (ISO 22369-2:2010, IDT)
- SS-ISO-22401 - Equipment for crop protection - Method for measurement of potential spray drift from horizontal boom sprayers by the use of a test bench (ISO 22401:2015, IDT)
- SS-ISO-22763 - Equipment for crop protection - Sprayers - Demonstration track for field crop sprayers (ISO 22763:2006, IDT)
- SS-ISO-22856 - Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels (ISO 22856:2008, IDT)
- SS-ISO-22866 - Equipment for crop protection - Methods for field measurement of spray drift (ISO 22866:2005, IDT)
- SS-ISO-24253-1 - Crop protection equipment - Spray deposition test for field crop - Part 1: Measurement in a horizontal plane (ISO 24253-1:2015, IDT)
- SS-ISO-24253-2 - Crop protection equipment - Spray deposition test for field crop - Part 2: Measurement in a crop (ISO 24253-2:2015, IDT)
- SS-ISO-25358 - Crop protection equipment - Droplet-size spectra from atomizers - Measurement and classification (ISO 25358:2018, IDT)
- SS-ISO-4254-16 - Agricultural machinery - Safety - Part 16: Portable agricultural grain augers (ISO 4254-16:2018, IDT)
- SS-ISO-5682-1 - Equipment for crop protection - Spraying equipment - Part 1: Test methods for sprayer nozzles (ISO 5682-1:2017, IDT)
- SS-ISO-5682-2 - Equipment for crop protection - Spraying equipment - Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayers (ISO 5682-2:2017, IDT)
- SS-ISO-5682-3 - Equipment for crop protection - Spraying equipment - Part 3: Test method to assess the performance of volume/area adjustment systems (ISO 5682-3:2017, IDT)
- SS-ISO-5682-4 - Equipment for crop protection - Spraying equipment - Part 4: Test Methods for Tank Agitation (ISO 5682-4:2021, IDT)
- SS-ISO-6686 - Equipment for crop protection - Antidrip devices - Determination of performance
- SS-ISO-8026 - Irrigation equipment - Irrigation sprayers - General requirements and test methods
- SS-ISO-8169 - Equipment for crop protection - Sprayers - Connecting dimensions for nozzles and manometers
- SS-ISO-8224-1 - Traveller irrigation machines - Part 1: Laboratory and field test methods
- SS-ISO-8524 - Equipment for distributing granulated pesticides or herbicides - Test method
- SS-ISO-9898 - Equipment for crop protection - Test methods for air assisted sprayers for bush and tree crops