Document Center List of Standards on Electromagnetic Compatibility (Emc) Including Radio Interference
ICS Code 33.100
Return to ICS Index.Up to Level 1:
Down to Level 3:
- 33.100.01 (Electromagnetic compatibility in general)
- 33.100.10 (Emission)
- 33.100.20 (Immunity)
- 33.100.99 (Other aspects related to EMC)
The following documents are a part of this series:
BSI:
- BS-EN-55014-2 - Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus
- BS-EN-61326-2-6 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-62041 - Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements
- BS-EN-IEC-61204-3-TC - Tracked Changes. Low-voltage switch mode power supplies
- BS-IEC-62153-4-3 - Metallic communication cable test methods
- PD-IEC-61000-3-16 - Electromagnetic compatibility (EMC)
IEC:
- IEC-1000-1-1 - Electromagnetic compatibility (EMC) - Part 1: General - Section 1: Application and interpretation of fundamental definitions and terms
- IEC-1000-2-1 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
- IEC-1000-2-3 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena
- IEC-1000-2-6 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances
- IEC-1000-2-9 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance. Basic EMC publication
- IEC-1000-5-1 - Electromagnetic compatibility (EMC) - Part 5-1: Installation and mitigation guidelines - General considerations
- IEC-1000-5-4 - Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 4: Immunity to HEMP - Specifications for protective devices against HEMP radiated disturbance. Basic EMC Publication
- IEC-1000-5-5 - Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance. Basic EMC Publication
- IEC-60050(161)-1 - Amendment 1 - International Electrotechnical Vocabulary. Chapter 161: Electromagnetic compatibility
- IEC-60050-161-AM4 - Amendment 4 - International Electrotechnical Vocabulary - Part 161: Electromagnetic compatibility
- IEC-60050-161-AM5 - Amendment 5 - International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility
- IEC-60533 - Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
- IEC-60601-1-SER - Medical electrical equipment - ALL PARTS
- IEC-60728-2 - Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
- IEC-60940 - Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
- IEC-61000-1-6 - Electromagnetic compatibility (EMC) - Part 1-6: General - Guide to the assessment of measurement uncertainty
- IEC-61000-2-14 - Electromagnetic compatibility (EMC) - Part 2-14: Environment - Overvoltages on public electricity distribution networks
- IEC-61000-2-7 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 7: Low frequency magnetic fields in various environments
- IEC-61000-3-8 - Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels
- IEC-61000-4-24 - Electromagnetic compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance
- IEC-61000-5-2 - Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
- IEC-61204-3 - Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
- IEC-61204-3-RL - Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
- IEC-61326 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
- IEC-61326-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
- IEC-61326-1-1 - Amendment 1: Electrical Equipment for Measurement, Control &Laboratory Use - Emc Requi
- IEC-61326-1-2 - Amendment 2: Electrical Equipment for Measurement, Control & Laboratory Use - Emc Requ
- IEC-61326-1-RL - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
- IEC-61326-2-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
- IEC-61326-2-2 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems
- IEC-61326-2-3 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
- IEC-61326-2-4 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
- IEC-61326-2-5 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1
- IEC-61326-2-6 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
- IEC-61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools
- IEC-61800-3-AM1 - Amendment 1 - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
- IEC-61920 - Infrared free air applications
- IEC-62041 - Transformers, power supplies, reactors and similar products - EMC requirements
- IEC-62153-4-0 - Metallic communication cable test methods - Part 4-0: Electromagnetic compatibility (EMC) - Relationship between surface transfer impedance and screening attenuation, recommended limits
- IEC-62153-4-1 - Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
- IEC-62153-4-10 - Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial test method
- IEC-62153-4-11 - Metallic communication cable test methods - Part 4-11: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of patch cords, coaxial cable assemblies, pre-connectorized cables - Absorbing clamp method
- IEC-62153-4-12 - Metallic communication cable test methods - Part 4-12: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of connecting hardware - Absorbing clamp method
- IEC-62153-4-13 - Metallic communication cable test methods - Part 4-13: Electromagnetic compatibility (EMC) - Coupling attenuation of links and channels (laboratory conditions) - Absorbing clamp method
- IEC-62153-4-15 - Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
- IEC-62153-4-3 - Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) related test method for measuring surface transfer impedance - Triaxial method
- IEC-62153-4-4 - Metallic communication cable test methods - Part 4-4: Electromagnetic compatibility (EMC) - Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method
- IEC-62153-4-5 - Metallic communication cables test methods - Part 4-5: Electromagnetic compatibility (EMC) - Coupling or screening attenuation - Absorbing clamp method
- IEC-62153-4-6 - Metallic cables and other passive components test methods - Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - line injection method
- IEC-62153-4-7 - Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies - Triaxial tube in tube method
- IEC-62153-4-9 - Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method
- IEC-62236-1 - Railway applications - Electromagnetic compatibility - Part 1: General
- IEC-62236-1-RL - Railway applications - Electromagnetic compatibility - Part 1: General
- IEC-62236-2 - Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world
- IEC-62236-2-RL - Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world
- IEC-62236-3-1 - Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
- IEC-62236-3-1-RL - Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
- IEC-62236-3-2 - Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
- IEC-62236-3-2-RL - Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
- IEC-62236-4 - Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus
- IEC-62236-4-RL - Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus
- IEC-62236-5 - Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
- IEC-62236-5-RL - Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
- IEC-62310-2 - Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements
- IEC-62742 - Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a non-metallic hull
- IEC-816 - Guide on methods of measurement of short duration transients on low-voltage power and signal lines
- IEC-940 - Guidance information on the application of capacitors, resistors, inductors and complete filter units for radio interference suppression
- IEC-GUIDE-107 - Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications
Other SDOs:
- AS/NZS-4417.1 - Regulatory compliance mark for electrical and electronic equipment - Use of the mark
- CISPR-14-2 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
- EN-55014-2 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
- EN-60940 - Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
- EN-61000-6-3 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
- EN-61326-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
- EN-61326-2-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
- EN-61326-2-2 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
- EN-61326-2-3 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
- EN-61326-2-4 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
- EN-61326-2-5 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1
- EN-61326-2-6 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
- EN-61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
- EN-62041 - Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements
- EN-62153-4-7 - Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method
- EN-IEC-61204-3 - Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
- EN-IEC-61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
- SS-EN-12895 - Industrial trucks - Electromagnetic compatibility
- SS-EN-61000-4-16 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
- SS-EN-ISO-14982 - Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
- SS-EN-ISO/IEC-7498-1 - Information technology - Open Systems Interconnection - Basic Reference Model: The Basic Model (ISO/IEC 7498-1:1994)
- SS-ISO-13766 - Earth-moving machinery - Electromagnetic compatibility (ISO 13766:2006, IDT)