Document Center List of Standards on Electromagnetic Compatibility In General
ICS Code 33.100.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D6726 - Standard Guide for Conducting Borehole Geophysical Logging—Electromagnetic Induction (Withdrawn 2024)
- ASTM-D6820 - Standard Guide for Use of the Time Domain Electromagnetic Method for Geophysical Subsurface Site Investigation
- ASTM-F3367 - Standard Practice for Simplified Methods for Addressing High-Intensity Radiated Fields (HIRF) and Indirect Effects of Lightning on Aircraft
BSI:
- BS-4727-1-GROUP-09 - Electromagnetic Compatibility
- BS-5394 - Specification for limits and methods of measurement of radio interference characteristics of fluorescent lamps and luminaires
- BS-5406-1 - Disturbances in supply systems caused by household appliances and similar electrical equipment
- BS-6299 - Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components
- BS-727 - Specification for radio-interference measuring apparatus
- BS-CISPR-16-3 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-12895 - Industrial trucks. Electromagnetic compatibility
- BS-EN-133000 - Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression
- BS-EN-138100 - Harmonized system of quality assessment for electronic components. Sectional specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)
- BS-EN-14010 - Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stages
- BS-EN-50065-1 - Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz
- BS-EN-50065-2-3 - Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz
- BS-EN-50065-2-3-TC - Tracked Changes. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz
- BS-EN-50082-2 - Cable networks for television signals, sound signals and interactive services. Electromagnetic compatibility for equipment
- BS-EN-50083-2 - Cable networks for television signals, sound signals and interactive services. Electromagnetic compatibility for equipment
- BS-EN-50083-8 - Cable networks for television signals, sound signals and interactive services
- BS-EN-50091-2 - Specification for uninterruptible power systems (UPS)
- BS-EN-50121-1 - Railway applications. Electromagnetic compatibility
- BS-EN-50121-1-TC - Tracked Changes. Railway applications. Electromagnetic compatibility
- BS-EN-50121-2 - Railway applications. Electromagnetic compatibility
- BS-EN-50121-2-TC - Tracked Changes. Railway applications. Electromagnetic compatibility
- BS-EN-50121-3-1 - Railway applications. Electromagnetic compatibility
- BS-EN-50121-3-2 - Railway applications. Electromagnetic compatibility
- BS-EN-50121-3-2-TC - Railway applications. Electromagnetic compatibility
- BS-EN-50121-4 - Railway applications. Electromagnetic compatibility
- BS-EN-50121-4-TC - Railway applications. Electromagnetic compatibility
- BS-EN-50121-5 - Railway applications. Electromagnetic compatibility
- BS-EN-50147-2 - Anechoic chambers
- BS-EN-50199 - Electromagnetic compatibility (EMC). Product standard for arc welding equipment
- BS-EN-50240 - Electromagnetic compatibilty (EMC). Product standard for resistance welding equipment
- BS-EN-50263 - Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipment
- BS-EN-50293 - Road traffic signal systems. Electromagnetic compatibility
- BS-EN-50310 - Telecommunications bonding networks for buildings and other structures
- BS-EN-50357 - Evaluation of Human Exposure To Electromagnetic Fields From Devices Used in Electroni
- BS-EN-50360 - Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear
- BS-EN-50360-TC - Tracked Changes. Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear
- BS-EN-50364 - Product standard for human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications
- BS-EN-50364-TC - Tracked Changes. Product standard for human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications
- BS-EN-50413 - Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
- BS-EN-50443 - Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systems
- BS-EN-50498 - Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehicles
- BS-EN-55014-2-TC - Tracked Changes. Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus
- BS-EN-55017 - Methods of measurement of the suppression characteristics of passive EMC filtering devices
- BS-EN-60601-1-2 - Medical electrical equipment
- BS-EN-60938-1 - Fixed inductors for electromagnetic interference suppression
- BS-EN-60938-2 - Fixed inductors for electromagnetic interference suppression
- BS-EN-60938-2-1 - Fixed inductors for electromagnetic interference suppression
- BS-EN-60940 - Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
- BS-EN-61000-2-2-TC - Electromagnetic compatibility (EMC)
- BS-EN-61000-2-9 - Electromagnetic compatibility (EMC). Environment
- BS-EN-61000-4-1 - Electromagnetic compatibility (EMC)
- BS-EN-61000-4-24 - Electromagnetic compatibility (EMC). Testing and measurement techniques
- BS-EN-61000-4-25 - Electromagnetic compatibility (EMC)
- BS-EN-61000-4-30 - Electromagnetic compatibility (EMC)
- BS-EN-61204-3 - Low voltage power supplies, d.c. output. Electromagnetic compatibility (EMC)
- BS-EN-61326 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-1 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-2-1 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-2-2 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-2-3 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-2-4 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61326-2-5 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-61543 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
- BS-EN-61800-3 - Adjustable speed electrical power drive systems
- BS-EN-619-TC - Tracked Changes. Continuous handling equipment and systems. Safety requirements for equipment for mechanical handling of unit loads
- BS-EN-62040-2 - Uninterruptible power systems (UPS)
- BS-EN-62135-2 - Resistance welding equipment
- BS-EN-62135-2-TC - Tracked Changes. Resistance welding equipment
- BS-EN-62153-1 - Metallic Communication Cables Test Methods, Electrical, Measurement of the Pulse/Step
- BS-EN-62153-1-1 - Metallic communication cables test methods
- BS-EN-62153-4-7 - Metallic communication cable test methods
- BS-EN-62310-2 - Static transfer systems (STS)
- BS-EN-62369-1 - Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz
- BS-EN-IEC-55014-2 - Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus
- BS-EN-IEC-60335-2-7 - Household and similar electrical appliances. Safety
- BS-EN-IEC-60437 - Radio interference test on high-voltage insulators
- BS-EN-IEC-60437-TC - Tracked Changes. Radio interference test on high-voltage insulators
- BS-EN-IEC-61326-1 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-1-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-1-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-2 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-2-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-3 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-3-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-4 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-4-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-5 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-5-TC - Tracked Changes. Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61326-2-6 - Electrical equipment for measurement, control and laboratory use. EMC requirements
- BS-EN-IEC-61800-3-TC - Tracked Changes. Adjustable speed electrical power drive systems
- BS-EN-IEC-62153-4-15 - Metallic cables and other passive components test methods
- BS-EN-IEC-62153-4-5 - Metallic communication cable test methods
- BS-EN-IEC-62153-4-7-TC - Tracked Changes. Metallic cables and other passive components test methods
- BS-EN-ISO-13766-2 - Earth-moving and building construction machinery. Electromagnetic compatibility (EMC) of machines with internal electrical power supply
- BS-EN-ISO-14982 - Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
- BS-IEC-60533 - Electrical and electronic installations in ships. Electromagnetic compatibility (EMC). Ships with a metallic hull
- BS-IEC-60533-TC - Tracked Changes. Electrical and electronic installations in ships. Electromagnetic compatibility (EMC). Ships with a metallic hull
- BS-IEC-60728-12 - Cable networks for television signals, sound signals and interactive services
- BS-IEC-61000-5-1 - Electromagnetic compatibility (EMC). Installation and mitigation guidelines
- BS-IEC-61000-5-6 - Electromagnetic compatibility (EMC)
- BS-IEC-61000-5-6-TC - Tracked Changes. Electromagnetic compatibility (EMC)
- BS-IEC-62153-4-10 - Metallic communication cable test methods
- BS-IEC-62153-4-15 - Metallic Communication Cable test methods
- BS-ISO-14117 - Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
- BS-ISO-14302-TC - Tracked Changes. Space systems. Electromagnetic compatibility requirements
- BS-ISO-7176-21 - Wheelchairs
- DD-ENV-50121-1 - Railway applications. Electromagnetic compatibility. General
- DD-ENV-50121-3-2 - Railway applications. Electromagnetic compatibility. Rolling stock. Apparatus
- DD-IEC-TS-61000-1-2 - General - Methodology for the Achievement of the Functionalsafety of Electrical and E
- PD-1001 - Guide To Electromagnetic Compatibility & Structured Cabling
- PD-CISPR-18-1 - Radio interference characteristics of overhead power lines and high-voltage equipment
- PD-CISPR-18-1-TC - Tracked Changes. Radio interference characteristics of overhead power lines and high-voltage equipment
- PD-CISPR-18-2 - Radio interference characteristics of overhead power lines and high-voltage equipment
- PD-CISPR-18-2-TC - Tracked Changes. Radio interference characteristics of overhead power lines and high-voltage equipment
- PD-CISPR-18-3 - Radio interference characteristics of overhead power lines and high-voltage equipment
- PD-CISPR-18-3-TC - Tracked Changes. Radio interference characteristics of overhead power lines and high-voltage equipment
- PD-CLC-50083-2-2 - Cable networks for television signals, sound signals and interactive services
- PD-CLC-50450 - Resistibility requirements for equipment having (a) telecommunication port(s)
- PD-CLC-50627 - Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 kHz
- PD-CLC/ETSI-103288 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Report of the CENELEC/ETSI Joint Working Group in response to the EC letter ENTRP/F5/DP/MM/entr.f5.(2013)43164 to the ESOs
- PD-CR-R106-001 - Guidelines for Product Committees on the Preparation of Standards Related To Human Exp
- PD-IEC-60725 - Consideration of reference impedances and public supply network impedances for use in determining disturbance characteristics of electrical equipment having a rated current 75 A per phase
- PD-IEC-61000-1-1 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-1-6 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-1-7 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-1-8 - Electromagnetic compatibility
- PD-IEC-61000-1-9 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-2-14 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-2-15 - Electromagnetic compatibility
- PD-IEC-61000-3-16 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-4-40 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-5-1 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-5-6 - Electromagnetic compatibility (EMC). Installation and mitigation guidelines
- PD-IEC-62153-4-1 - Metallic communication cable test methods
- PD-ISO-21609 - Road vehicles. (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
- PD-R210-008 - Guide to EMC conformity of apparatus designed for military and other purposes
- TH-42056 - Electromagnetic Compatibility (EMC). A Guide to the Requirements of the European Directive and to CE Marking
IEC:
- IEC-60050-161-AM10 - Amendment 10 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility
- IEC-60050-161-AM6 - Amendment 6 - International electrotechnical vocabulary - Part 161: Electromagnetic compatibility
- IEC-60050-161-AM7 - Amendment 7 - International electrotechnical vocabulary - Part 161: Electromagnetic compatibility
- IEC-60050-161-AM8 - Amendment 8 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility
- IEC-60050-161-AM9 - Amendment 9 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility
- IEC-60725 - Consideration of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current ≤75 A per phase
- IEC-60728-12 - Cable networks for television signals, sound signals and interactive services - Part 12: Electromagnetic compatibility of systems
- IEC-61000-1-1 - Electromagnetic compatibility (EMC) - Part 1-1: General - Application and interpretation of fundamental definitions and terms
- IEC-61000-1-7 - Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single-phase systems under non-sinusoidal conditions
- IEC-61000-1-8 - Electromagnetic compatibility - Part 1-8: Phase angles of harmonic current emissions and voltages in the public supply networks - Future expectations
- IEC-61000-1-9 - Electromagnetic compatibility (EMC) - Part 1-9: General - Evaluation of uncertainty for the measurement of harmonic current emissions
- IEC-61000-2-10 - Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance
- IEC-61000-2-11 - Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMP environments
- IEC-61000-2-12 - Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems
- IEC-61000-2-15 - Electromagnetic compatibility - Part 2-15: Description of the characteristics of networks with high penetration of power electronic converters
- IEC-61000-2-2 - Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
- IEC-61000-2-2-AM1 - Amendment 1 - Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
- IEC-61000-2-2-AM2 - Amendment 2 - Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
- IEC-61000-2-8 - Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
- IEC-61000-3-16 - Electromagnetic compatibility (EMC) - Part 3-16: Limits - Limits for harmonic currents produced by the inverter of inverter-type electrical energy-supplying equipment with a reference current less than or equal to 75 A per phase connected to public low-voltage systems
- IEC-61000-4-1 - Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
- IEC-61000-4-24 - Electromagnetic compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance
- IEC-61000-4-24-AM1 - Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance
- IEC-61000-4-40 - Electromagnetic compatibility (EMC) - Part 4-40: Testing and measurement techniques - Digital methods for the measurement of power quantities of modulated or distorted signals
- IEC-61000-5-1 - Electromagnetic compatibility (EMC) - Part 5-1: Installation and mitigation guidelines - General considerations
- IEC-61000-5-3 - Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMP protection concepts
- IEC-61000-5-6 - Electromagnetic compatibility (EMC) - Part 5-6: Installation and mitigation guidelines - Mitigation of external EM influences
- IEC-61000-5-7 - Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code)
- IEC-61280-4-2-RL - Fibre-optic communication subsystem test procedures - Part 4-2: Installed cabling plant - Single-mode attenuation and optical return loss measurements
- IEC-61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools
- IEC-61800-3-RL - Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
- IEC-62041 - Transformers, power supplies, reactors and similar products - EMC requirements
ISO:
- ISO-13766 - Earth-moving machinery - Electromagnetic compatibility
- ISO-13766-1 - Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions
- ISO-13766-2 - Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety
- ISO-14117 - Active implantable medical devices - Electromagnetic compatibility - EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
- ISO-14302 - Space systems - Electromagnetic compatibility requirements
- ISO-14982 - Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
- ISO-16764 - Lifts, escalators and passenger conveyors -- Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility
- ISO-21609 - Road vehicles - (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
- ISO-7176-21 - Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
Other SDOs:
- CISPR-10 - Organization, Rules & Procedures of the CISPR
- CISPR-17 - Methods of measurement of the suppression characteristics of passive EMC filtering devices
- CISPR-18-1 - Radio interference characteristics of overhead power lines and high-voltage equipment - Part 1: Description of phenomena
- CISPR-18-1-RL - Radio interference characteristics of overhead power lines and high-voltage equipment - Part 1: Description of phenomena
- CISPR-18-2 - Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits
- CISPR-18-2-RL - Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits
- CISPR-18-3 - Radio interference characteristics of overhead power lines and high-voltage equipment - Part 3: Code of practice for minimizing the generation of radio noise
- CISPR-18-3-1 - Amendment 1: Part 3: Code of Practice for Minimizing the Generation of Radio Noise, Radio
- CISPR-18-3-AM 1 - Amendment 1 To CISPR-18-3, Part 3: Code of Practice for Minimizing the Generation of Radio
- CISPR-18-3-RL - Radio interference characteristics of overhead power lines and high-voltage equipment - Part 3: Code of practice for minimizing the generation of radio noise
- CISPR-19 - Guidance on the Use of the Substitution Method for Measurements of Radiation From Micr
- CISPR-28 - Industrial, scientific and medical equipment (ISM) - Guidelines for emission levels within the bands designated by the ITU
- DIN-EN-14010 - Safety of Machinery - Equipment for Power Driven Parking of Motor Vehicles - Safety &
- DIN-EN-617 - Continuous Handling Equipment & Systems - Safety & Emc Requirements for the Equipment
- DIN-EN-619 - Continuous Handling Equipment & Systems - Safety & Emc Requirements for Equipment For
- EN-12895 - Industrial trucks - Electromagnetic compatibility
- EN-14010 - Safety of Machinery - Equipment for Power Driven Parking of Motor Vehicles - Safety &
- EN-50065-1 - Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances
- EN-50083-8 - Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks
- EN-50121-1 - Railway applications - Electromagnetic compatibility - Part 1: General
- EN-50121-2 - Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world
- EN-50121-3-1 - Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
- EN-50121-3-2 - Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
- EN-50121-4 - Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus
- EN-50121-5 - Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
- EN-50293 - Road traffic signal systems - Electromagnetic compatibility
- EN-50310 - Telecommunications bonding networks for buildings and other structures
- EN-50357 - Evaluation of Human Exposure To Electromagnetic Fields From Devices Used in Electroni
- EN-50360 - Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to t
- EN-50364 - Limitation of Human Exposure To Electromagnetic Fields From Devices Operating in The
- EN-50413 - Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
- EN-50498 - Electromagnetic Compatibility (Emc) - Product Family Standard for Aftermarket Electron
- EN-55017 - Methods of measurement of the suppression characteristics of passive EMC filtering devices (CISPR 17:2011)
- EN-61000-4-1 - Electromagnetic Compatibility (Emc), Testing & Measurement Techniques, Overview of IEC
- EN-619 - Continuous Handling Equipment & Systems - Safety & Emc Requirements for Equipment For
- EN-62135-2 - Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
- EN-62153-4-7 - Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method
- EN-62310-2 - Static Transfer Systems (Sts), Electromagnetic (Emc) Requirements
- EN-62369-1 - Part 1: Fields Produced by Devices Used for Electronic Article Surveillance, Radio Fre
- EN-ISO-13766-1 - Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions
- EN-ISO-14982 - Agricultural & Forestry Machines - Electromagnetic Compatibility - Test Methods & Acce
- JIS-T-0601-1-2 - Medical electrical equipment -- Part 1-2: General requirements for safety -- Electromagnetic compatibility -- Requirements and tests
- SIS-ISO/TS-21609 - Road vehicles - EMC guidelines for installation of aftermarket radio frequency transmitting equipment (ISO/TS 21609:2014, IDT)
- SS-EN-12895 - Industrial trucks - Electromagnetic compatibility
- SS-EN-13309 - Construction machinery - Electromagnetic compatibility of machines with internal power supply
- SS-EN-14010 - Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
- SS-EN-50121-1 - Railway applications - Electromagnetic compatibility - Part 1: General
- SS-EN-50121-3-2 - Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
- SS-EN-617 - Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
- SS-EN-619 - Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
- SS-EN-ISO-13766-1 - Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions (ISO 13766-1:2018)
- SS-EN-ISO-13766-2 - Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018)
- SS-EN-ISO-14982 - Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
- SS-ISO-13766 - Earth-moving machinery - Electromagnetic compatibility (ISO 13766:2006, IDT)
- SS-ISO-14302 - Space systems - Electromagnetic compatibility requirements
- UNE-EN-50121-2 - Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world