Document Center List of Standards on Emission
ICS Code 33.100.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-1597 - Specification for limits and methods of measurement of electromagnetic interference generated by marine equipment and installations
- BS-613 - Specification for components and filter units for electromagnetic interference suppression
- BS-833 - Specification for radio interference limits and measurements for the electrical ignition systems of internal combustion engines
- BS-905-1 - Sound and television broadcast receivers and associated equipment: electromagnetic compatibility. Specification for limits of radio interference
- BS-CISPR-12 - Vehicles, motorboats and spark-ignited engine-driven devices. Radio disturbance characteristics. Limits and methods of measurement
- BS-CISPR-16-1 - Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus
- BS-CISPR-16-2 - Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity
- BS-EN-12015 - Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission
- BS-EN-133200 - Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression (filters for which safety tests are required)
- BS-EN-50081-1 - Electromagnetic compatibility. Generic emission standard
- BS-EN-50370-1 - Electromagnetic compatibility (EMC). Product family standard for machine tools
- BS-EN-50697 - Information technology. Measurement of end-to-end links, modular plug terminated links and direct attach cabling
- BS-EN-50697-TC - Tracked Changes. Information technology. Measurement of end-to-end links, modular plug terminated links and direct attach cabling
- BS-EN-50715 - Electromagnetic compatibility. Radio frequency emission. Statistical considerations in the determination of compliance for mass-produced products with requirements for unwanted radio frequency emission
- BS-EN-50715-TC - Tracked Changes. Electromagnetic compatibility. Radio frequency emission. Statistical considerations in the determination of compliance for mass-produced products with requirements for unwanted radio frequency emission
- BS-EN-55011 - Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement
- BS-EN-55012 - Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers
- BS-EN-55013 - Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement
- BS-EN-55014-1 - Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus
- BS-EN-55015 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
- BS-EN-55016-1-1 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-55016-1-2 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-55016-1-3 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-55016-1-4 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-55016-1-5 - Amendment 1. Specification for radio disturbance and immunity measuring apparatus and methods.
- BS-EN-55016-1-6 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-55016-2-1 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-55016-2-2 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-55016-2-3 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-55016-4-2 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-55022 - Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
- BS-EN-55025 - Vehicles, boats and internal combustion engines - Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers
- BS-EN-55032 - Electromagnetic compatibility of multimedia equipment. Emission requirements
- BS-EN-55032 KIT - Electromagnetic compatibility of multimedia equipment. Emission requirements
- BS-EN-55103-1 - Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use
- BS-EN-60255-25 - Electrical relays
- BS-EN-60255-26 - Measuring relays and protection equipment
- BS-EN-60601-1-2 - Medical electrical equipment
- BS-EN-61000-2-2 - Electromagnetic compatibility (EMC)
- BS-EN-61000-3-11 - Electromagnetic compatibility (EMC). Limits
- BS-EN-61000-3-12 - Electromagnetic compatibility (EMC)
- BS-EN-61000-3-2 - Electromagnetic compatibility (EMC)
- BS-EN-61000-3-3 - Electromagnetic compatibility (EMC)
- BS-EN-61000-3-3 EXPERT COM - Expert Commentary for BS EN 61000-3-3:2013+A2:2021. Electromagnetic compatibility (EMC)
- BS-EN-61000-3-3-TC - Tracked Changes. Electromagnetic compatibility (EMC)
- BS-EN-61000-4-20 - Electromagnetic compatibility (EMC)
- BS-EN-61000-4-21 - Electromagnetic compatibility (EMC)
- BS-EN-61000-4-7 - Electromagnetic compatibility (EMC). Testing and measurement techniques
- BS-EN-61000-5-7 - Electromagnetic compatibility (EMC). Installation and mitigation guidelines
- BS-EN-61000-6-3 - Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
- BS-EN-61000-6-4 - Electromagnetic compatibility (EMC)
- BS-EN-61076-1-TC - Connectors for electronic equipment. Product requirements
- BS-EN-61547 - Equipment for general lighting purposes. EMC immunity requirements
- BS-EN-61967-2 - Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz
- BS-EN-62433-2 - EMC IC modelling
- BS-EN-62433-3 - EMC IC modelling
- BS-EN-IEC-55014-1 - Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus
- BS-EN-IEC-55015 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
- BS-EN-IEC-55016-1-1 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-IEC-55016-1-4 - Specification for radio disturbance and immunity measuring apparatus and methods
- BS-EN-IEC-55025 - Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers
- BS-EN-IEC-55025-TC - Tracked Changes. Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers
- BS-EN-IEC-55036 - Electric and hybrid electric road vehicles. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers below 30 MHz
- BS-EN-IEC-61000-4-20 - Electromagnetic compatibility (EMC)
- BS-EN-IEC-61000-4-20-TC - Tracked Changes. Electromagnetic compatibility (EMC)
- BS-EN-IEC-61000-6-3 - Expert Commentary for BS EN IEC 61000-6-3:2021. Electromagnetic compatibility (EMC)
- BS-EN-IEC-61000-6-3 EX COMM - Expert Commentary for BS EN IEC 61000-6-3:2021. Electromagnetic compatibility (EMC)
- BS-EN-IEC-61000-6-3-TC - Tracked Changes. Electromagnetic compatibility (EMC)
- BS-EN-IEC-61000-6-4 - Electromagnetic compatibility (EMC)
- BS-EN-IEC-61000-6-8 - Electromagnetic compatibility (EMC)
- BS-EN-IEC-61543 - Residual current-operated protective devices (RCDs) for household and similar use. Electromagnetic compatibility
- BS-EN-IEC-61547 - Equipment for general lighting purposes. EMC immunity requirements
- BS-EN-IEC-61547-TC - Tracked Changes. Equipment for general lighting purposes. EMC immunity requirements
- BS-EN-IEC-62153-4-15 - Metallic cables and other passive components test methods
- BS-EN-IEC-62153-4-5 - Metallic communication cable test methods
- BS-EN-IEC-62153-4-7-TC - Tracked Changes. Metallic cables and other passive components test methods
- BS-EN-IEC-62433-6 - EMC IC modelling
- BS-IEC-1000-3-5 - Section 5: Limitation of Voltage Fluctuations & Flicker in Low-Voltage Power Supply System
- BS-IEC-1000-3-6 - Electromagnetic compatibility (EMC). Limits
- BS-IEC-60533 - Electrical and electronic installations in ships. Electromagnetic compatibility (EMC). Ships with a metallic hull
- BS-IEC-61000-6-6 - Electromagnetic compatibility (EMC)
- BS-IEC-62153-4-8 - Metallic cables and other passive components. Test methods
- BS-IEC-62153-4-9 - Metallic communication cable test methods
- DD-ENV-50121-4 - Railway Applications, Electromagnetic Compatibility, Emission & Immunity of the Signal
- DD-IEC-61000-3-5 - Electromagnetic compatibility (EMC)
- DD-IEC-62370 - Electroacoustics. Instruments for the measurement of sound intensity. Electromagnetic and electrostatic compatability requirements and test procedures
- DD-IEC/PAS-62437 - Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices. Limits and methods of measurement. Specifications for active antennas
- PD-CISPR-16-2-5 - Specification for radio disturbance and immunity measuring apparatus and methods
- PD-CISPR-16-3 - Specification for radio disturbance and immunity measuring apparatus and methods
- PD-CISPR-16-4-1 - Specification for radio disturbance and immunity measuring apparatus and methods
- PD-CISPR-16-4-3 - Specification for radio disturbance and immunity measuring apparatus and methods
- PD-CISPR-16-4-4 - Specification for radio disturbance and immunity measuring apparatus and methods
- PD-CISPR-16-4-5 - Specification for radio disturbance and immunity measuring apparatus and methods
- PD-CISPR-30-1 - Test method on electromagnetic emissions
- PD-CISPR-30-2 - Test method on electromagnetic emissions
- PD-CISPR-31 - Database on the characteristics of radio services
- PD-CLC-50481 - Recommendations on filters for shielded enclosures
- PD-CLC-50485 - Electromagnetic compatibility. Emission measurements in fully anechoic chambers
- PD-CLC-50669 - Investigation Results on Electromagnetic Interference in the Frequency Range below 150 kHz
- PD-CR-R210-010 - Electromagnetic compatibility. Emission measurements in fully anechoic chambers
- PD-IEC-61000-1-4 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-1-4-TC - Tracked Changes. Electromagnetic compatibility (EMC)
- PD-IEC-61000-1-8 - Electromagnetic compatibility
- PD-IEC-61000-1-9 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-3-13 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-3-14 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-3-15 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-3-18 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-3-6 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-3-7 - Electromagnetic compatability (EMC)
- PD-IEC-61000-4-37 - Electromagnetic compatibility (EMC)
- PD-IEC-62370 - Electroacoustics. Instruments for the measurement of sound intensity. Electromagnetic and electrostatic compatibility requirements and test procedures
- PD-IEC/PAS-62825 - Methods of measurement and limits for radiated disturbances from plasma display panel TVs in the frequency range 150 kHz to 30 MHz
IEC:
- CISPR-16-1-4-AM2 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
- CISPR-16-2-3-AM2 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
- CISPR-16-3-RL - Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports
- CISPR-16-4-4-AM1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services calculation of limits for the protection of radio services
- CISPR-16-4-4-AM2 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and
methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints
and a model for the calculation of limits for the protection of radio services - CISPR-32-AM1 - Amendment 1 - Electromagnetic compatibility of multimedia equipment - Emission requirements
- IEC-60364-4-44 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
- IEC-60364-4-44-1 - Corrigendum 1 - Amendment 1 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
- IEC-60364-4-44-2 - Amendment 2 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
- IEC-60533 - Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
- IEC-60601-1-2 - Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
- IEC-60601-1-2-1 - Amendment 1: Medical Electrical Equipment - Part 1-2: General Requirements for Safety - Co
- IEC-60601-1-2-AM1 - Amendment 1 - Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
- IEC-60728-12 - Cable networks for television signals, sound signals and interactive services - Part 12: Electromagnetic compatibility of systems
- IEC-61000-1-4 - Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
- IEC-61000-1-8 - Electromagnetic compatibility - Part 1-8: Phase angles of harmonic current emissions and voltages in the public supply networks - Future expectations
- IEC-61000-1-9 - Electromagnetic compatibility (EMC) - Part 1-9: General - Evaluation of uncertainty for the measurement of harmonic current emissions
- IEC-61000-2-13 - Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted
- IEC-61000-2-4 - Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances
- IEC-61000-2-4-RL - Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances
- IEC-61000-3-11 - Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection
- IEC-61000-3-11-RL - Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current = 75 A and subject to conditional connection
- IEC-61000-3-12 - Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and 75 A per phase
- IEC-61000-3-12-AM1 - Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and 75 A per phase
- IEC-61000-3-13 - Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems
- IEC-61000-3-14 - Electromagnetic compatibility (EMC) - Part 3-14: Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems
- IEC-61000-3-15 - Electromagnetic compatibility (EMC) - Part 3-15: Limits - Assessment of low frequency electromagnetic immunity and emission requirements for dispersed generation systems in LV network
- IEC-61000-3-18 - Electromagnetic compatibility (EMC) - Part 3-18: Limits - Assessment of network characteristics for the application of harmonic emission limits - Equipment connected to LV distribution systems not covered by IEC 61000-3-2 and IEC 61000-3-12
- IEC-61000-3-2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
- IEC-61000-3-2-1 - Amendment 1: Electromagnetic Compatibility (Emc) - Part 3-2: Limits - Limits for Harmo
- IEC-61000-3-2-2 - Amendment 2: Electromagnetic Compatibility (Emc) - Part 3-2: Limits - Limits for Harmo
- IEC-61000-3-2-AM1 - Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
- IEC-61000-3-2-AM2 - Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
- IEC-61000-3-2-RL - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current =16 A per phase)
- IEC-61000-3-3 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection
- IEC-61000-3-3-1 - Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
- IEC-61000-3-3-2 - Amendment 2: Electromagnetic Compatibility (Emc) - Part 3-3: Limits - Limitation of Vo
- IEC-61000-3-3-AM2 - Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection
- IEC-61000-3-3-RL - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current < or = 16 A per phase and not subject to conditional connection - Redline Edition
- IEC-61000-3-4 - Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
- IEC-61000-3-5 - Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
- IEC-61000-3-6 - Electromagnetic compatibility (EMC) - Part 3-6: Limits - Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems
- IEC-61000-3-7 - Electromagnetic compatibility (EMC) - Part 3-7: Limits - Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
- IEC-61000-3 SERIES - Electromagnetic compatibility (EMC) - Part 3: Limit - ALL PARTS
- IEC-61000-4-20 - Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
- IEC-61000-4-20-1 - Amendment 1: Electromagnetic Compatibility (Emc) - Part 4-20: Testing & Measurement Te
- IEC-61000-4-21 - Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods
- IEC-61000-4-22 - Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emissions and immunity measurements in fully anechoic rooms (FARs)
- IEC-61000-4-33 - Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters
- IEC-61000-4-37 - Electromagnetic compatibility (EMC) - Calibration and verification protocol for harmonic emission compliance test systems
- IEC-61000-4-7 - Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
- IEC-61000-4-7-1 - Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
- IEC-61000-6-3 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments
- IEC-61000-6-3-AM1 - Amendment 1 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
- IEC-61000-6-4 - Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
- IEC-61000-6-4-AM1 - Amendment 1 - Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
- IEC-61000-6-4-RL - Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
- IEC-61000-6-6 - Electromagnetic compatibility (EMC) - Part 6-6: Generic standards - HEMP immunity for indoor equipment
- IEC-61000-6-8 - Electromagnetic compatibility (EMC) - Part 6-8: Generic standards - Emission standard for professional equipment in commercial and light-industrial locations
- IEC-61547 - Equipment for general lighting purposes - EMC immunity requirements
- IEC-61547-RL - Equipment for general lighting purposes - EMC immunity requirements
- IEC-61851-21-2 - Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems
- IEC-62040-2 - Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
- IEC-62040-2-RL - Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
- IEC-62153-4-1 - Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
- IEC-62153-4-10 - Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial test method
- IEC-62153-4-10-AM1 - Amendment 1 - Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial test method
- IEC-62153-4-15 - Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
- IEC-62153-4-15-AM1 - Amendment 1 - Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
- IEC-62153-4-1-AM1 - Amendment 1 - Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
- IEC-62153-4-3 - Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) related test method for measuring surface transfer impedance - Triaxial method
- IEC-62153-4-3-AM1 - Amendment 1 - Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) related test method for measuring surface transfer impedance - Triaxial method
- IEC-62153-4-7 - Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies - Triaxial tube in tube method
- IEC-62153-4-7-RL - Metallic cables and other passive components test methods - Part 4-7: Electromagnetic compatibility (EMC) -Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies - Triaxial tube in tube method
- IEC-62153-4-8-RL - Metallic cables and other passive components - Test methods - Part 4-8: Electromagnetic compatibility (EMC) - Capacitive coupling admittance
- IEC-62153-4-9 - Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method
- IEC-62153-4-9-AM1 - Amendment 1 - Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method
- IEC-62153-4-9-AM2 - Amendment 2 - Metallic communication cable test methods - Part 4-9: Electromagnetic compatibility (EMC) related test method for measuring coupling attenuation of screened balanced cables - Triaxial method
- IEC-62153-4-9-RL - Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method
- IEC-62370 - Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures
- IEC-62370-AM1 - Amendment 1 - Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures
- IEC-62433-2 - EMC IC modelling - Part 2: Models of integrated circuits for EMI behavioural simulation - Conducted emissions modelling (ICEM-CE)
- IEC-62433-3 - EMC IC modelling - Part 3: Models of integrated circuits for EMI behavioural simulation - Radiated emissions modelling (ICEM-RE)
- IEC/PAS-62437 - Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement - Specifications for active antennas
- IEC/PAS-62825 - Methods of measurement and limits for radiated disturbances from plasma display panel TVs in the frequency range 150 kHz to 30 MHz
Other SDOs:
- AFNOR-NF-EN-55011 - French Language - Appareils Industriels, Scientifiques Et Medicaux - Caracteristiques
- CISPR-11 - Requirements for semiconductor power converters (SPC)/ Improvement of repeatability for measurements in the frequency range 1-18 GHz
- CISPR-11-1 - Amendment 1: Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
- CISPR-11-2 - Amendment 2: Limits and Methods of Measurement of Electromagnetic Disturbance Characteri
- CISPR-11A - 1St Supplement To CISPR 11
- CISPR-11/A1 - Amendment 1 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
- CISPR-11-AM 1 - Amendment 1 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
- CISPR-11-AM 2 - Amendment 2 - Requirements for semiconductor power converters (SPC)/ Improvement of repeatability for measurements in the frequency range 1-18 GHz
- CISPR-12 - Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
- CISPR-12-AM1 - Amendment 1 - Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
- CISPR-13 - Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
- CISPR-13-1 - Amendment 1 - Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
- CISPR-13-2 - Amendment 2: Sound & Television Broadcast Receivers & Associated Equipment - Radio Dis
- CISPR-13-3 - Amendment 3: Limits & Methods of Measurement of Radio Interference Characteristics Of
- CISPR-14-1 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
- CISPR-14-1-1 - Amendment 1 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
- CISPR-14-1-2 - Amendment 2 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
- CISPR-14-1-AM 1 - Amendment 1: Limits & Methods of Measurement of Radio Disturbance Characteristics of Elect
- CISPR-14-2-1 - Amendment 1
- CISPR-14-3 - Amendment To CISPR-14 (1985 Edition of CISPR-14, Now Replaced by CISPR-14, 1993 Edition)
- CISPR-14-AM 1 - Amendment 1: Limits & Methods of Measurement of Radio Disturbance Characteristics of Elect
- CISPR-15 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
- CISPR-15-1 - Amendment 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
- CISPR-15-2 - Amendment 2: Limits & Methods of Measurement of Radio Disturbance Characteristics of E
- CISPR-15-AM 1 - Amendment 1: Limits & Methods of Measurement of Radio Disturbance Characteristics of Elect
- CISPR-15-AM 2 - Amendment 2: Limits & Methods of Measurement of Radio Disturbance Characteristics Of
- CISPR-16-1 - Part 1: Radio Disturbance & Immunity Measuring Apparatus, Specification for Radio Disturba
- CISPR-16-1-1 - Specification for radio disturbance and immunity measuring apparatus and methods . Part 1-1: Radio disturbance and immunity measuring apparatus . Measuring apparatus
- CISPR-16-1-1-1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
- CISPR-16-1-1-2 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
- CISPR-16-1-1-RL - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus - Redline Edition
- CISPR-16-1-2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements
- CISPR-16-1-2-1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements
- CISPR-16-1-2-2 - Amendment 2: Specification for Radio Disturbance & Immunity Measuring Apparatus & Met
- CISPR-16-1-2-RL - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements
- CISPR-16-1-3 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power
- CISPR-16-1-3-AM1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power
- CISPR-16-1-3-AM2 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power
- CISPR-16-1-4 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
- CISPR-16-1-4-1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
- CISPR-16-1-4-2 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
- CISPR-16-1-5 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz
- CISPR-16-1-5-AM1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz
- CISPR-16-1-6 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration
- CISPR-16-1-6-AM1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration
- CISPR-16-1-6-AM2 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration
- CISPR-16-1-AM 1 - Amendment 1 To CISPR-16-1, Specification for Radio Disturbance & Immunity Mueasuring Appar
- CISPR-16-1-AM 2 - Amendment 2 To CISPR-16-1, Specification for Radio Disturbance & Immunity Measuring Appara
- CISPR-16-2 - Part 2: Methods of Measurement of Disturbances & Immunity, Specification for Radio Disturb
- CISPR-16-2-1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
- CISPR-16-2-1-1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
- CISPR-16-2-1-2 - Amendement 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
- CISPR-16-2-2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power
- CISPR-16-2-2-AM 1 - Amendment 1: Specification for Radio Disturbance & Immunity Measuring Apparatus & Met
- CISPR-16-2-2-AM 2 - Amendment 2: Specification for Radio Disturbance & Immunity Measuring Apparatus & Met
- CISPR-16-2-3 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
- CISPR-16-2-3-1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
- CISPR-16-2-3-2 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
- CISPR-16-2-3-AM1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
- CISPR-16-2-3-RL - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
- CISPR-16-2-4 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements
- CISPR-16-2-5 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-5: In situ measurements for disturbing emissions produced by physically large equipment
- CISPR-16-2-AM 1 - Amendment 1 To CISPR-16-2, Specification for Radio Disturbances & Immunity Measuring Appar
- CISPR-16-2-AM 2 - Amendment 2 To CISPR-16-2, Specification for Radio Disturbance & Immunity Measuring Appara
- CISPR-16-3 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports
- CISPR-16-3-1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports
- CISPR-16-3-AM2 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports
- CISPR-16-4 - Part 4: Uncertainty in Emc Measurements, Specification for Radio Disturbance & Immunit
- CISPR-16-4-1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests
- CISPR-16-4-1-1 - Amendment 1: Specification for Radio Disturbance & Immunitymeasuring Apparatus & Methods
- CISPR-16-4-1-2 - Amendment 2: Specification for Radio Disturbance & Immunity Measuring Apparatus & Met
- CISPR-16-4-2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
- CISPR-16-4-2-AM1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
- CISPR-16-4-2-AM2 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
- CISPR-16-4-3 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products
- CISPR-16-4-3-1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products
- CISPR-16-4-4 - Specification for radio disturbance and immunity measuring apparatus and
methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints
and a model for the calculation of limits for the protection of radio services - CISPR-16-4-5 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods
- CISPR-16-4-5-AM1 - Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods
- CISPR-16-4-5-AM2 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods
- CISPR-16-4-6 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-6: Uncertainties, statistics and limit modelling . Statistics on radio frequency interference (RFI) and verification by measurements in the field
- CISPR-16 SERIES - Specification for radio disturbance and immunity measuring apparatus and methods - ALL PARTS
- CISPR-18-2 - Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits
- CISPR-18-2-1 - Amendment 1 for CISPR-18-2, Part 2: Methods of Measurement &Procedure for Determining
- CISPR-18-2-2 - Amendment 2: Part 2: Methods of Measurement and Procedure Fordetermining Limits, Radio Inte
- CISPR-18-2-AM 1 - Amendment 1 To CISPR-18-2, Part 2: Methods of Measurement &Procedure for Determining Lim
- CISPR-18-2-AM 2 - Amendment 2 To CISPR-18-2, Part 2: Methods of Measurement &Procedure for Determining Lim
- CISPR-22 - Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
- CISPR-22-1 - Amendment 1: Information Technology Equipment - Radio Disturbance Characteristics - Li
- CISPR-22-2 - Amendment 2: Information Technology Equipment - Radio Disturbance Characteristics - Li
- CISPR-22-RL - Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
- CISPR-23 - Determination of Limits for Industrial, Scientific & Medicalequipment
- CISPR-24 - Information technology equipment - Immunity characteristics - Limits and methods of measurement
- CISPR-24-1 - Amendment 1 - Information technology equipment - Immunity characteristics - Limits and methods of measurement
- CISPR-25 - Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
- CISPR-30 - Replaced by CISPR-30-1
- CISPR-30-1 - Test method on electromagnetic emissions - Part 1: Electronic control gear for single- and double-capped fluorescent lamps
- CISPR-30-2 - Test method on electromagnetic emissions - Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps
- CISPR-31 - Database on the characteristics of radio services
- CISPR-32 - Electromagnetic compatibility of multimedia equipment - Emission requirements
- CISPR-32-RL - Electromagnetic compatibility of multimedia equipment - Emission requirements
- CISPR-36 - Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz
- DIN-EN-12015 - Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission; German version EN 12015:2014
- DIN-EN-61000-4-21 - Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods
- DS-EN-55011 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
- EN-12015 - Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission
- EN-50121-2 - Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world
- EN-50697 - Information technology - Measurement of end-to-end (E2E) links
- EN-55011 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
- EN-55012 - Vehicles, Boats & Internal Combustion Engines - Radio Disturbance Characteristics - Li
- EN-55013 - Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
- EN-55014-1 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
- EN-55015 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
- EN-55016-1-1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
- EN-55016-1-2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements
- EN-55016-1-3 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power
- EN-55016-1-4 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
- EN-55016-1-5 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz
- EN-55016-1-6 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration
- EN-55016-2-1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
- EN-55016-2-2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power
- EN-55016-2-3 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
- EN-55016-4-2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
- EN-55022 - Information Technology Equipment - Radio Disturbance Characteristics, Limits & Methods
- EN-55025 - Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
- EN-55032 - Electromagnetic compatibility of multimedia equipment - Emission requirements
- EN-55103-1 - Part 1: Emissions, Electromagnetic Compatibility - Product Family Standard for Audio,
- EN-60601-1-2 - Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
- EN-61000-3-12 - Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase
- EN-61000-3-2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
- EN-61000-3-3 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
- EN-61000-4-20 - Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
- EN-61000-4-21 - Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods
- EN-61000-4-22 - Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emission and immunity measurements in fully anechoic rooms (FARs)
- EN-61000-4-7 - Part 4-7: Testing & Measurement Techniques - General Guide on Harmonics & Interharmoni
- EN-61000-6-4 - Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
- EN-61547 - Equipment for General Lighting Purposes - Emc Immunity Requirements
- EN-62433-2 - EMC IC modelling - Part 2: Models of integrated circuits for EMI behavioural simulation - Conducted emissions modelling (ICEM-CE)
- EN-62433-3 - EMC IC modelling. Models of integrated Circuits for EMI behavioural simulation. Radiated emissions modelling (ICEM-RE)
- EN-IEC-55016-1-1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus (CISPR 16-1-1:2019)
- EN-IEC-55016-1-4 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements (CISPR 16-1-4:2019)
- EN-IEC-61000-3-2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current
16 A per phase) (IEC 61000-3-2:2018) - EN-IEC-62040-2 - Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
- IEC-60601-1 SERIES - Medical electrical equipment - ALL PARTS
- SIS-EN-60601-1-2 - Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests - Swedish standard, English language edition
- SIS-EN-61000-4-21 - Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods (Swedish Standard) English Language Edition
- SS-EN-12015 - Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission
- SS-EN-55011 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
- SS-EN-55013 - Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
- SS-EN-55014-1 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
- SS-EN-55015 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
- SS-EN-55022 - Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
- SS-EN-55032 - Electromagnetic compatibility of multimedia equipment - Emission requirements
- SS-EN-61000-3-2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current = 16 A per phase)
- SS-EN-61000-3-3 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current = 16 A per phase and not subject to conditional connection
- SS-EN-61000-6-3 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
- SS-EN-61547 - Equipment for general lighting purposes - EMC immunity requirements
- UNE-EN-50121-2 - Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world