Document Center List of Standards on Electrical Apparatus For Explosive Atmospheres
ICS Code 29.260.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-1090 - Specification for flameproof hand-held electric drilling machines primarily for use in mines
- BS-1259 - Intrinsically Safe Electrical Apparatus & Circuits for Use in Explosive Atmospheres
- BS-229 - Specification. Flameproof Enclosure of Electrical Apparatus
- BS-2538 - Specification for air-cooled flameproof single-phase lighting transformer units supplied from high voltage systems
- BS-3101 - Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines
- BS-3454 - Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines
- BS-3905 - Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines.
- BS-4683-4 - Specification for electrical apparatus for explosive atmospheres. Type of protection 'e'
- BS-4727-2-GROUP-13 - Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering
- BS-5067 - Specification for flameproof transformers for use in mines
- BS-5125 - Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines
- BS-5126-1 - Mining type flameproof supply and control units for use on systems up to 1100 V
- BS-5126-2 - Mining type flameproof supply and control units for use on systems up to 1100 V
- BS-5126-3 - Mining type flameproof supply and control units for use on systems up to 1100 V
- BS-5126-4 - Mining type flameproof supply and control units for use on systems up to 1100 V
- BS-5345-2 - Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture). Classification of hazardous areas
- BS-5345-4 - Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture). Installation and maintenance requirements for electrical apparatus with type of protection 'i'. Intrinsically safe electrical apparatus and systems
- BS-5345-6 - Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture). Recommendations for type of protection 'e'. Increased safety
- BS-542 - Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries
- BS-5501-2 - Electrical apparatus for potentially explosive atmospheres. Oil immersion 'o'
- BS-5501-6 - Electrical apparatus for potentially explosive atmospheres. Increased safety 'e'
- BS-5501-7 - Electrical apparatus for potentially explosive atmospheres. Intrinsic safety 'i'
- BS-5501-8 - Electrical apparatus for potentially explosive atmospheres. Encapsulation 'm'
- BS-5501-9 - Electrical apparatus for potentially explosive atmospheres. Specification for intrinsically safe electrical systems 'i'
- BS-60080 - Explosive and toxic atmospheres. Hazard detection mapping. Guidance on the placement of permanently installed flame and gas detection devices using software tools and other techniques
- BS-60080 EXPERT COM - Expert Commentary for BS 60080:2020 Explosive and Toxic Atmospheres: Hazard Detection Mapping. Guidance on the placement of permanently installed flame and gas detection devices using software tools and other techniques
- BS-6182-1 - Intriniscally safe power supplies for use in coal mines
- BS-6182-2 - Intrinsically safe power supplies for use in coal mines
- BS-6182-3 - Intrinsically safe power supplies for use in coal mines
- BS-6467-1 - Electrical apparatus with protection by enclosure for use in the presence of combustible dusts. Specification for apparatus
- BS-6467-2 - Electrical apparatus with protection by enclosure for use in the presence of combustible dusts. Guide to selection, installation and maintenance
- BS-6556-1 - Low speed digital signals for use in coal mines.
- BS-6556-2 - Low speed digital signals for use in coal mines
- BS-6556-3 - Low speed digital signals for use in coal mines
- BS-6704 - Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines
- BS-6705 - Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines
- BS-6708 - Flexible cables for use at mines and quarries
- BS-6709 - Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp
- BS-6881 - Specification for construction and testing of miners' caplamps in relation to the risk of explosion for mines susceptible to firedamp
- BS-6941 - Specification for Electrical Apparatus for Explosive Atmospheres With Type of Protecti
- BS-6959 - Code of practice for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases (other than for mining applications or explosives processing and manufacture)
- BS-7535 - Guide to the use of electrical apparatus complying with BS 5501 or BS 6941 in the presence of combustible dusts
- BS-787-1 - Specification for mining type flameproof gate-end boxes
- BS-787-2 - Specification for mining type flameproof gate-end boxes
- BS-787-3 - Specification for mining type flameproof gate-end boxes
- BS-787-4 - Specification for mining type flameproof gate-end boxes
- BS-7924 - Code of practice for the repair and overhaul of certified electrical apparatus intended for use in mines susceptible to firedamp
- BS-8494 - Electronic portable and transportable apparatus designed to detect and measure carbon dioxide in indoor ambient air. Requirements and test methods
- BS-EN-1127-1 - Explosive atmospheres. Explosion prevention and protection
- BS-EN-13160-1 - Leak detection systems
- BS-EN-13160-1-TC - Tracked Changes. Leak detection systems
- BS-EN-13160-3 - Leak detection systems
- BS-EN-13160-3-TC - Tracked Changes. Leak detection systems
- BS-EN-13160-4 - Leak detection systems
- BS-EN-13160-4-TC - Tracked Changes. Leak detection systems
- BS-EN-13160-6 - Leak detection systems
- BS-EN-13160-7 - Leak detection systems
- BS-EN-13160-7-TC - Tracked Changes. Leak detection systems
- BS-EN-13237 - Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
- BS-EN-14986 - Design of fans working in potentially explosive atmospheres
- BS-EN-14986-TC - Tracked Changes. Design of fans working in potentially explosive atmospheres
- BS-EN-1710 - Equipment and components intended for use in potentially explosive atmospheres in underground mines
- BS-EN-50015 - Electrical apparatus for potentially explosive atmospheres. Oil immersion 'o'
- BS-EN-50016 - Electrical Apparatus for Potentially Explosive Atmospheres - Pressurized Apparatus 'P'
- BS-EN-50017 - Electrical Apparatus for Potentially Explosive Atmospheres -Powder Filling 'Q'
- BS-EN-50018 - Electrical Apparatus for Potentially Explosive Atmospheres - Flameproof Enclosures 'D'
- BS-EN-50019 - Electrical Apparatus for Potentially Explosive Atmospheres,Increased Safety 'E'
- BS-EN-50020 - Electrical apparatus for potentially explosive atmospheres. Intrinsic safety 'i'
- BS-EN-50021 - Electrical Apparatus for Potentially Explosive Atmospheres -Type of Protection 'N'
- BS-EN-50033 - Specification for construction and testing of miners' caplamps in relation to the risk of explosion, for mines susceptible to firedamp
- BS-EN-50050 - Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment
- BS-EN-50050-1 - Electrostatic hand-held spraying equipment. Safety requirements
- BS-EN-50050-2 - Electrostatic hand-held spraying equipment. Safety requirements
- BS-EN-50050-3 - Electrostatic hand-held spraying equipment. Safety requirements
- BS-EN-50073 - Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
- BS-EN-50194 - Electrical Apparatus for the Detection of Combustible Gases in Domestic Premises - Te
- BS-EN-50194-1 - Electrical apparatus for the detection of flammable gases in household premises
- BS-EN-50194-1-TC - Tracked Changes. Electrical apparatus for the detection of flammable gases in household premises
- BS-EN-50223 - Stationary electrostatic application equipment for ignitable flock material. Safety requirements
- BS-EN-50223-TC - Tracked Changes. Stationary electrostatic application equipment for ignitable flock material. Safety requirements
- BS-EN-50241-2 - Specification for open path apparatus for the detection of combustible or toxic gases and vapours
- BS-EN-50244 - Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
- BS-EN-50271 - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
- BS-EN-50271-TC - Tracked Changes. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
- BS-EN-50281-1-1 - Electrical Apparatus for Use in the Presence of Combustibledust, Electrical Apparatus
- BS-EN-50281-1-2 - Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures. Selection, installation and maintenance
- BS-EN-50281-3 - Electrical Apparatus for Use in the Presence of Combustible Dust, Classification of A
- BS-EN-50284 - Special Requirements for Construction, Test & Marking of Electrical Apparatus of Equipment
- BS-EN-50303 - Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust
- BS-EN-50381 - Transportable ventilated rooms with or without an internal source of release
- BS-EN-50394-1 - Electrical apparatus for potentially explosive atmospheres. Group I. Intrinsically safe systems
- BS-EN-50628 - Erection of electrical installations in underground mines
- BS-EN-60079-0 - Explosive atmospheres
- BS-EN-60079-1 - Explosive atmospheres
- BS-EN-60079-10 - Electrical apparatus for explosive gas atmospheres
- BS-EN-60079-10-1 - Explosive atmospheres
- BS-EN-60079-10-2 - Explosive atmospheres
- BS-EN-60079-10-2-TC - Tracked Changes. Explosive atmospheres
- BS-EN-60079-11 - Explosive atmospheres
- BS-EN-60079-13 - Explosive atmospheres
- BS-EN-60079-13-TC - Tracked Changes. Explosive atmospheres
- BS-EN-60079-14 - Explosive atmospheres
- BS-EN-60079-15 - Explosive atmospheres
- BS-EN-60079-17 - Explosive atmospheres
- BS-EN-60079-18 - Explosive atmospheres
- BS-EN-60079-19 - Explosive atmospheres
- BS-EN-60079-2 - Explosive atmospheres
- BS-EN-60079-25 - Explosive atmospheres
- BS-EN-60079-26 - Explosive atmospheres
- BS-EN-60079-26-TC - Tracked Changes. Explosive atmospheres
- BS-EN-60079-27 - Explosive atmospheres
- BS-EN-60079-28 - Explosive atmospheres
- BS-EN-60079-28-TC - Tracked Changes. Explosive atmospheres
- BS-EN-60079-29-1 - Explosive atmospheres
- BS-EN-60079-29-2 - Explosive atmospheres
- BS-EN-60079-29-2-TC - Tracked Changes. Explosive atmospheres
- BS-EN-60079-29-3 - Explosive atmospheres
- BS-EN-60079-29-4 - Explosive atmospheres
- BS-EN-60079-30-1 - Explosive atmospheres
- BS-EN-60079-30-1-TC - Tracked Changes. Explosive atmospheres
- BS-EN-60079-30-2 - Explosive atmospheres
- BS-EN-60079-30-2-TC - Tracked Changes. Explosive atmospheres
- BS-EN-60079-31 - Explosive atmospheres
- BS-EN-60079-32-2 - Explosive atmospheres
- BS-EN-60079-35-1 - Household and similar electrical appliances - Safety
- BS-EN-60079-35-2 - Explosive atmospheres
- BS-EN-60079-5 - Explosive atmospheres
- BS-EN-60079-5-TC - Tracked Changes. Explosive atmospheres
- BS-EN-60079-6 - Explosive atmospheres
- BS-EN-60079-6-TC - Tracked Changes. Explosive atmospheres
- BS-EN-60079-7 - Explosive atmospheres. Equipment protection by increased safety e
- BS-EN-61241-0 - Electrical apparatus for use in the presence of combustible dust
- BS-EN-61241-1 - Electrical Apparatus for Use in the Presence of Combustible Dust, Protection by Enclo
- BS-EN-61241-10 - Electrical apparatus for use in the presence of combustible dust
- BS-EN-61241-11 - Electrical apparatus for use in the presence of combustible dust
- BS-EN-61241-14 - Electrical apparatus for use in the presence of combustible dust
- BS-EN-61241-17 - Electrical apparatus for use in the presence of combustible dust
- BS-EN-61241-18 - Electrical apparatus for use in the presence of combustible dust
- BS-EN-61241-4 - Electrical apparatus for use in the presence of combustible dust
- BS-EN-61779-1 - Electrical Apparatus for the Detection & Measurement of Flammable Gases, General Requi
- BS-EN-62013-1 - Caplights for use in mines susceptible to firedamp
- BS-EN-62013-2 - Caplights for use in mines susceptible to firedamp
- BS-EN-62086-1 - Electrical Apparatus for Explosive Gas Atmospheres, Electrical Resistance Trace Heatin
- BS-EN-62086-2 - Electrical Apparatus for Explosive Gas Atmospheres, Electrical Resistance Trace Heatin
- BS-EN-IEC-60079-0 - Explosive atmospheres
- BS-EN-IEC-60079-10-1 - Explosive atmospheres
- BS-EN-IEC-60079-15 - Explosive atmospheres
- BS-EN-IEC-60079-15-TC - Tracked Changes. Explosive atmospheres
- BS-EN-IEC-60079-17-TC - Tracked Changes. Explosive atmospheres
- BS-EN-IEC-60079-19 COMBO - Explosive atmospheres
- BS-EN-IEC-60079-19 COMM - Expert Commentary for BS EN IEC 60079-19:2019. Explosive atmospheres
- BS-EN-IEC-60079-25 - Explosive atmospheres
- BS-EN-IEC-60079-25-TC - Tracked Changes. Explosive atmospheres
- BS-EN-IEC-60079-26 - Explosive atmospheres
- BS-EN-IEC-60079-26-TC - Tracked Changes. Explosive atmospheres
- BS-EN-IEC-60079-31-TC - Tracked Changes. Explosive atmospheres
- BS-EN-IEC-61386-22 - Conduit Systems for cable management
- BS-EN-IEC-61386-22-TC - Tracked Changes. Conduit Systems for cable management
- BS-EN-IEC-62990-1 - Workplace atmospheres
- BS-EN-IEC-62990-2 - Workplace atmospheres
- BS-EN-ISO-80079-20-1 - Explosive atmospheres
- BS-EN-ISO-80079-20-2 - Explosive atmospheres
- BS-EN-ISO-80079-36 - Explosive atmospheres
- BS-EN-ISO-80079-37 - Explosive atmospheres
- BS-EN-ISO-80079-38 - Explosive atmospheres
- BS-EN-ISO/IEC-80079- - Explosive atmospheres
- BS-EN-ISO/IEC-80079-20-2 - Explosive atmospheres
- BS-EN-ISO/IEC-80079-34 - Explosive atmospheres
- BS-EN-ISO/IEC-80079-34 EXPERT COM - Expert Commentary for BS EN ISO/IEC 80079‑34:2020. Explosive atmospheres. Application of quality systems for ex product manufacture
- BS-EN-ISO/IEC-80079-34-TC - Tracked Changes. Explosive atmospheres
- BS-IEC-60079-13 - Explosive atmospheres. Equipment protection by pressurized room 'p'
- BS-IEC-60079-19 - Electrical apparatus for explosive gas atmospheres
- BS-IEC-60079-29-2 - Explosive atmospheres. Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
- BS-IEC-60079-33 - Explosive atmospheres. Equipment protection by special protection “s”
- BS-IEC-61241-4 - Electrical apparatus for use in the presence of combustible dust
- BS-IEC-62086-1 - Electrical Apparatus for Explosive Gas Atmospheres, Electrical Resistance Trace Heatin
- BS-IEC-62086-2 - Application Guide for Design, Installation and Maintenance
- BS-IEC-62990-1 - Workplace atmospheres
- PD-CLC-50426 - Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation. Guide
- PD-CLC-60079-32-1 - Explosive atmospheres
- PD-CLC-60079-33 - Explosive atmospheres. Equipment protection by special protection 's'
- PD-CLC-IEC-60079-39 - Explosive atmospheres. Intrinsically safe systems with electronically controlled spark duration limitation.
- PD-CLC-IEC-60079-43 - Explosive atmospheres
- PD-CLC-IEC-60079-47 - Explosive atmospheres
- PD-IEC-60079-20 - Electrical apparatus for explosive gas atmospheres
- PD-IEC-60079-32-1 - Explosive atmospheres. Electrostatic hazards, guidance
- PD-IEC-60079-39 - Explosive atmospheres
- PD-IEC-60079-40 - Explosive atmospheres
- PD-IEC-60079-43 - Explosive atmospheres
- PD-IEC-60079-46 - Explosive atmospheres
- PD-IEC-60079-47 - Explosive atmospheres
- PD-IEC-60079-48 - Explosive atmospheres
- TH-42065 - Electrical Equipment for Flammable Atmospheres, an International Survey of Regulations
IEC:
- IEC-1241-2-1 - Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures of dust
- IEC-1241-2-2 - Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers
- IEC-1241-2-3 - Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 3: Method for determining minimum ignition energy of dust/air mixtures
- IEC-60050-426 - International Electrotechnical Vocabulary (IEV) - Part 426: Explosive atmospheres
- IEC-60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
- IEC-60079-0-RL - Part 0: Equipment - General Requirements, Explosive Atmospheres
- IEC-60079-1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d
- IEC-60079-10 - Part 10: Classification of Hazardous Areas, Electrical Apparatus for Explosive Gas Atmosph
- IEC-60079-10-1 - Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
- IEC-60079-10-1 CMV - Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
- IEC-60079-10-1-RL - Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
- IEC-60079-10-2 - Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
- IEC-60079-10-2-RL - Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
- IEC-60079-11 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i
- IEC-60079-1-1 - Part 1-1: Flameproof Enclosures 'D' - Method of Test for Ascertainment of Maximum Experime
- IEC-60079-11-RL - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety 'i'
- IEC-60079-13 - Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
- IEC-60079-14 - Explosive atmospheres - Part 14: Electrical installation design, selection and installation of equipment, including initial inspection
- IEC-60079-15 - Explosive atmospheres - Part 15: Equipment protection by type of protection "n
- IEC-60079-15-RL - Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
- IEC-60079-17 - Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
- IEC-60079-17-RL - Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
- IEC-60079-18 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m
- IEC-60079-18-AM1 - Amendment 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m
- IEC-60079-18-RL - Explosive atmospheres - Part 18: Equipment protection by encapsulation 'm'
- IEC-60079-19 - Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
- IEC-60079-19-AM1 - Amendment 1 - Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
- IEC-60079-1-RL - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures 'd'
- IEC-60079-2 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p
- IEC-60079-20-1 - Corrigendum 1 - Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
- IEC-60079-25 - Explosive atmospheres - Part 25: Intrinsically safe electrical systems
- IEC-60079-26 - Explosive atmospheres - Part 26: Equipment with Separation Elements or combined Levels of Protection
- IEC-60079-26-RL - Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
- IEC-60079-27 - Part 27: Fieldbus Intrinsically Safe Concept (Fisco), Explosive Atmospheres
- IEC-60079-28 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
- IEC-60079-28-RL - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
- IEC-60079-29-1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
- IEC-60079-29-1-AM1 - Amendment 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
- IEC-60079-29-2 - Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
- IEC-60079-29-2-RL - Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance ofdetectors for flammable gases and oxygen
- IEC-60079-29-3 - Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems
- IEC-60079-29-4 - Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases
- IEC-60079-2-RL - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p
- IEC-60079-30-1 - Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
- IEC-60079-30-2 - Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
- IEC-60079-31 - Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t
- IEC-60079-31-RL - Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
- IEC-60079-32-1 - Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance
- IEC-60079-32-1-AM1 - Amendment 1 - Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance
- IEC-60079-32-2 - Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
- IEC-60079-33 - Explosive atmospheres - Part 33: Equipment protection by special protection 's'
- IEC-60079-35-1 - Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion
- IEC-60079-35-2 - Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters
- IEC-60079-39 - Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation
- IEC-60079-40 - Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems
- IEC-60079-42 - Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment
- IEC-60079-43 - Explosive atmospheres - Part 43: Equipment in adverse service conditions
- IEC-60079-46 - Explosive atmospheres - Part 46: Equipment assemblies
- IEC-60079-47 - Explosive atmospheres - Part 47: Equipment protection by 2-wire intrinsically safe ethernet concept (2-WISE)
- IEC-60079-5 - Explosive atmospheres - Part 5: Equipment protection by powder filling "q
- IEC-60079-5-AM1 - Amendment 1 - Explosive atmospheres - Part 5: Equipment protection by powder filling "q
- IEC-60079-5-AM 1 - Amendment 1: Electrical Apparatus for Explosive Gas Atmospheres - Part 5: Powder Filling '
- IEC-60079-5-RL - Explosive atmospheres - Part 5: Equipment protection by powder filling 'q'
- IEC-60079-6 - Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o
- IEC-60079-6-AM1 - Amendment 1 - Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o
- IEC-60079-7 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e
- IEC-60079-7-AM1 - Amendment 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e
- IEC-60079 SERIES - Explosive atmospheres - ALL PARTS
- IEC-61241-0 - Part 0: General Requirements, Electrical Apparatus for Use the Presence of Combustible Dus
- IEC-61241-1 - Part 1: Protection by Enclosures 'Td', Electrical Apparatusfor Use in the Presence of Co
- IEC-61241-10 - Part 10: Classification of Areas Where Combustible Dusts Areor May Be Present, Electrical
- IEC-61241-11 - Part 11: Protection by Intrinsic Safety 'Id', Electrical Apparatus for Use in the Pres
- IEC-61241-1-1 - Part 1-1: Electrical Apparatus Protected by Enclosures & Surface Temperature Limitation -
- IEC-61241-1-2 - Part 1-2: Electrical Apparatus Protected by Enclosures & Surface Temperature Limitation -
- IEC-61241-17 - Part 17: Inspection & Maintenance of Electrical Installations in Hazardous Areas (Othe
- IEC-61241-18 - Part 18: Protection by Encapsulation 'Md', Electrical Apparatus for Use in the Presence Of
- IEC-61241-2-1 - Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures of dust
- IEC-61241-2-2 - Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers
- IEC-61241-2-3 - Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 3: Method for determining minimum ignition energy of dust/air mixtures
- IEC-61241-3 - Part 3: Classification of Areas Where Combustible Dusts Areor May Be Present, Electrical
- IEC-61241-4 - Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD
- IEC-61779-1 - Part 1: General Requirements & Test Methods, Electrical Apparatus for the Detection & Meas
- IEC-61779-2 - Part 2: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up To
- IEC-61779-3 - Part 3: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up To
- IEC-61779-4 - Part 4: Performance Requirements for Group Ii Apparatus Indicating a Volume Fraction Up To
- IEC-61779-5 - Part 5: Performance Requirements for Group Ii Apparatus Indicating a Volume Fraction Up To
- IEC-61779-6 - Part 6: Guide for the Selection, Installation, Use & Maintenance of Apparatus for the Dete
- IEC-62013-1 - Part 1: General Requirements - Construction & Testing in Relation To the Risk of Explosion
- IEC-62013-2 - Part 2: Performance & Other Safety-Related Matters, Caplights for Use in Mines Susceptible
- IEC-62086-1 - Part 1: General & Testing Requirements, Electrical Apparatusfor Explosive Gas Atmospheres
- IEC-62086-2 - Part 2: Application Guide for Design, Installation & Maintenance, Electrical Apparatus For
- IEC-62990-1 - Workplace atmospheres - Part 1: Gas detectors . Performance requirements of detectors for toxic gases
- IEC-62990-2 - Workplace atmospheres - Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours
- IEC-79-16 - Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses
- IEC-79-3 - Electrical apparatus for explosive gas atmospheres - Part 3: Testing of intrinsically safe apparatus circuits
- IEC/IEEE-60079-30-1 - Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
- IEC/IEEE-60079-30-2 - Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
ISO:
- ISO-10807 - Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres
- ISO-80079-36 - Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements
- ISO-80079-37 - Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non electrical type of protection constructional safety "c", control of ignition source "b", liquid immersion "k"
- ISO/IEC-80079-20-1 - Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
- ISO/IEC-80079-20-2 - Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods
- ISO/IEC-80079-34 - Explosive atmospheres - Part 34: Application of quality systems for ex product manufacture
- ISO/IEC-80079-38 - Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines
Other SDOs:
- DIN-EN-14460 - Explosion Resistant Equipment
- DIN-EN-60079-29-1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases (IEC 60079-29-1:2016, modified); German version EN 60079-29-1:2016
- EN-13160-1 - Leak detection systems - Part 1: General Principles
- EN-13160-2 - Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
- EN-13160-4 - Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
- EN-13160-6 - Leak detection systems - Part 6: Sensors in monitoring wells
- EN-13160-7 - Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
- EN-13237 - Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
- EN-14986 - Design of fans working in potentially explosive atmospheres
- EN-1710 - Equipment & Components Intended for Use in Potentially Explosive Atmospheres in Underg
- EN-50194-1 - Electrical Apparatus for the Detection of Combustible Gases in Domestic Premises, Tes
- EN-50223 - Stationary electrostatic application equipment for ignitable flock material - Safety requirements
- EN-50628 - Erection of electrical installations in underground mines
- EN-60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
- EN-60079-1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures 'd'
- EN-60079-10-1 - Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
- EN-60079-10-2 - Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
- EN-60079-11 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety 'i'
- EN-60079-13 - Explosive atmospheres - Part 13: Equipment protection by pressurized room 'p' and artificially ventilated room 'v'
- EN-60079-14 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection
- EN-60079-15 - Part 15: Equipment Protection by Type of Protection 'N', Explosive Atmospheres
- EN-60079-17 - Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
- EN-60079-18 - Explosive atmospheres - Part 18: Equipment protection by encapsulation 'm'
- EN-60079-19 - Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
- EN-60079-2 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure 'p'
- EN-60079-25 - Explosive atmospheres - Part 25: Intrinsically safe electrical systems
- EN-60079-26 - Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
- EN-60079-27 - Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept
- EN-60079-28 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
- EN-60079-29-1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
- EN-60079-29-2 - Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
- EN-60079-29-3 - Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems
- EN-60079-29-4 - Part 29-4: Gas Detectors - Performance Requirements of Open Path Detectors for Flamma
- EN-60079-30-1 - Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
- EN-60079-30-2 - Explosive Atmospheres, Electrical Resistance Trace Heating, Application Guide for Des
- EN-60079-31 - Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure 't'
- EN-60079-32-2 - Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
- EN-60079-35-1 - Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion
- EN-60079-35-2 - Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters
- EN-60079-5 - Explosive atmospheres - Part 5: Equipment protection by powder filling 'q'
- EN-60079-6 - Explosive atmospheres - Part 6: Equipment protection by liquid immersion 'o'
- EN-60079-7 - Explosive atmospheres - Part 7: Equipment protection by increased safety 'e'
- EN-61241-0 - Electrical Apparatus for Use in the Presence of Combustible Dust, General Requirement
- EN-61241-1 - Electrical Apparatus for Use in the Presence of Combustible Dust, Protection by Enclo
- EN-61241-11 - Electrical Apparatus for Use in the Presence of Combustible Dust, Protection by Intri
- EN-61241-4 - Electrical Apparatus for Use in the Presence of Combustible Dust, Type of Protection
- EN-62013-1 - Caplights for Use in Mines Susceptible To Firedamp, General Requirements, Constructio
- EN-62013-2 - Caplights for use in mines susceptible to firedamp - Part 2: Performance and other safety-related matters
- EN-62086-1 - Electrical Apparatus for Explosive Gas Atmospheres, Electrical Resistance Trace Heatin
- EN-62086-2 - Electrical Apparatus for Explosive Gas Atmospheres, Electrical Resistance Trace Heatin
- EN-IEC-60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
- EN-IEC-60079-15 - Explosive atmospheres - Part 15: Equipment protection by type of protection "n" (IEC 60079-15:2017)
- EN-ISO-80079-36 - Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements
- EN-ISO-80079-37 - Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'
- SS-EN-1127-1 - Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
- SS-EN-13160-1 - Leak detection systems - Part 1: General Principles
- SS-EN-13160-2 - Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
- SS-EN-13160-4 - Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
- SS-EN-13160-6 - Leak detection systems - Part 6: Sensors in monitoring wells
- SS-EN-13160-7 - Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
- SS-EN-13237 - Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
- SS-EN-13617-1 - Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
- SS-EN-14460 - Explosion resistant equipment
- SS-EN-14986 - Design of fans working in potentially explosive atmospheres
- SS-EN-1710 - Equipment and components intended for use in potentially explosive atmospheres in underground mines
- SS-EN-60079-1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
- SS-EN-ISO-80079-20-1 - Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data (ISO/IEC 80079-20-1:2017)
- SS-EN-ISO-80079-36 - Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
- SS-EN-ISO-80079-37 - Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k'' (ISO 80079-37:2016)
- SS-EN-ISO/IEC-80079-20-2 - Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods (ISO/IEC 80079-20-2:2016)
- SS-EN-ISO/IEC-80079-38 - Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
- SS-EN-ISO/IEC-80079-38-AM1 - Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
- UNE-EN-13160-1 - Leak detection systems - Part 1: General Principles
- UNE-EN-13160-2 - Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
- UNE-EN-13160-4 - Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
- UNE-EN-13160-6 - Leak detection systems - Part 6: Sensors in monitoring wells
- UNE-EN-60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
- UNE-EN-60079-1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures 'd'
- UNE-EN-60079-10-2 - Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
- UNE-EN-60079-18 - Explosive atmospheres - Part 18: Equipment protection by encapsulation 'm'
- UNE-EN-60079-2 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure 'p'
- UNE-EN-60079-26 - Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
- UNE-EN-60079-32-2 - Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
- UNE-EN-60079-5 - Explosive atmospheres - Part 5: Equipment protection by powder filling 'q'