Document Center List of Standards on Pipes And Fittings Of Other Materials
ICS Code 23.040.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A862 - Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
- ASTM-A979 - Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
- ASTM-C1053 - Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications (Withdrawn 2019)
- ASTM-C1092 - Specification for Glass Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Withdrawn 1995)
- ASTM-C1103 - Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
- ASTM-C1103M - Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric) (Withdrawn 2022)
- ASTM-C118 - Standard Specification for Concrete Pipe for Irrigation or Drainage
- ASTM-C118M - Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric)
- ASTM-C1208 - Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
- ASTM-C1214 - Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
- ASTM-C1214M - Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
- ASTM-C1244 - Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
- ASTM-C1244M - Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric) (Withdrawn 2020)
- ASTM-C14 - Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
- ASTM-C1417 - Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
- ASTM-C1417M - Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
- ASTM-C1433 - Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
- ASTM-C1433M - Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
- ASTM-C1447 - Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
- ASTM-C1448 - Standard Specification for Non-Asbestos Fiber-Cement Conduit
- ASTM-C1449 - Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
- ASTM-C1450 - Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
- ASTM-C1478 - Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
- ASTM-C1479 - Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
- ASTM-C1479M - Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
- ASTM-C14M - Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
- ASTM-C1504 - Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
- ASTM-C1504M - Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
- ASTM-C1675 - Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
- ASTM-C1765 - Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
- ASTM-C1786 - Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
- ASTM-C1818 - Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
- ASTM-C1840 - Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe
- ASTM-C301 - Standard Test Methods for Vitrified Clay Pipe
- ASTM-C361 - Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
- ASTM-C361M - Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)
- ASTM-C412 - Standard Specification for Concrete Drain Tile
- ASTM-C412M - Standard Specification for Concrete Drain Tile (Metric)
- ASTM-C428 - Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe (Withdrawn 2022)
- ASTM-C444 - Standard Specification for Perforated Concrete Pipe
- ASTM-C444M - Standard Specification for Perforated Concrete Pipe (Metric) (Withdrawn 2021)
- ASTM-C497 - Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
- ASTM-C497M - Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
- ASTM-C500 - Standard Test Methods for Asbestos-Cement Pipe (Withdrawn 2022)
- ASTM-C505 - Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
- ASTM-C505M - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
- ASTM-C506 - Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
- ASTM-C506M - Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
- ASTM-C507 - Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
- ASTM-C507M - Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
- ASTM-C508 - Standard Specification for Asbestos-Cement Underdrain Pipe (Withdrawn 2021)
- ASTM-C541 - Standard Specification for Linings for Asbestos-Cement Pipe (Withdrawn 2022)
- ASTM-C600 - Standard Test Method of Thermal Shock Test on Glass Pipe (Withdrawn 2019)
- ASTM-C601 - Standard Test Method for Pressure Test on Glass Pipe (Withdrawn 2019)
- ASTM-C644 - Specification for Asbestos-Cement Non-Pressure Small Diameter Sewer Pipe (Withdrawn 1981)
- ASTM-C654 - Standard Specification for Porous Concrete Pipe
- ASTM-C654M - Standard Specification for Porous Concrete Pipe (Metric)
- ASTM-C655 - Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
- ASTM-C655M - Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
- ASTM-C662 - Standard Specification for Impervious Graphite Pipe and Threading
- ASTM-C663 - Standard Specification for Asbestos-Cement Storm Drain Pipe (Withdrawn 2019)
- ASTM-C668 - Standard Specification for Asbestos-Cement Transmission Pipe (Withdrawn 2019)
- ASTM-C700 - Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
- ASTM-C76 - Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
- ASTM-C76M - Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
- ASTM-C789 - Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers[Metric] (Withdrawn 2000)
- ASTM-C789M - Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric] (Withdrawn 2000)
- ASTM-C822 - Standard Terminology Relating to Concrete Pipe and Related Products
- ASTM-C875 - Standard Specification for Asbestos-Cement Conduit (Withdrawn 2019)
- ASTM-C924 - Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Withdrawn 2013)
- ASTM-C924M - Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric) (Withdrawn 2013)
- ASTM-C969 - Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
- ASTM-C969M - Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
- ASTM-C985 - Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
- ASTM-C985M - Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
- ASTM-C990 - Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
- ASTM-D6244 - Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
- ASTM-PS62 - Provisional Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Withdrawn 1999)
BSI:
- BS-5178 - Specification for prestressed concrete pipes for drainage and sewerage
- BS-5886 - Methods for field pressure testing of asbestos-cement pipelines
- BS-5911-1 - Concrete pipes and ancillary concrete
- BS-5911-100 - Precast Concrete Pipes, Fittings & Ancillary Products, Specification for Unreinforced
- BS-5911-103 - Precast Concrete Pipes, Fittings & Ancillary Products, Specification for Prestressed N
- BS-5911-120 - Precast Concrete Pipes, Fittings & Ancillary Products, Specification for Reinforced Ja
- BS-5911-1-TC - Tracked Changes. Concrete pipes and ancillary concrete
- BS-5911-2 - Precast Concrete Pipes, Fittings & Ancillary Products, Specification for Inspection Ch
- BS-5911-3 - Concrete pipes and ancillary concrete products
- BS-5911-4 - Concrete pipes and ancillary concrete products
- BS-5911-5 - Concrete pipes and ancillary concrete products
- BS-5927 - Guide for laying of asbestos-cement pipelines
- BS-65 - Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings
- BS-EN-12585 - Glass plant, pipeline and fittings. Pipeline and fittings DN 15 to 1000. Compatibility and interchangeability
- BS-EN-12763 - Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery
- BS-EN-1444 - Fibre-cement pipelines. Guide for laying and on-site work practices
- BS-EN-14636-1 - Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC)
- BS-EN-1916 - Concrete pipes and fittings, unreinforced, steel fibre and reinforced
- BS-EN-1917 - Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
- BS-EN-295-1 - Vitrified clay pipe systems for drains and sewers
- BS-EN-295-10 - Vitrified clay pipes and fittings and pipe joints for drains and sewers. Performance requirements
- BS-EN-295-2 - Vitrified clay pipe systems for drains and sewers
- BS-EN-295-3 - Vitrified clay pipe systems for drains and sewers
- BS-EN-295-4 - Vitrified clay pipe systems for drains and sewers
- BS-EN-295-5 - Vitrified clay pipe systems for drains and sewers
- BS-EN-295-6 - Vitrified clay pipes systems for drain and sewers
- BS-EN-295-7 - Vitrified clay pipe systems for drains and sewers
- BS-EN-642 - Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
- BS-ISO-4437-3-TC - Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
- BS-ISO-8085-3 - Polyethylene Fittings for Use With Polyethylene Pipes for the Supply of Gaseous Fuels,
ISO:
- ISO-3586 - Glass plant, pipeline and fittings - General rules for testing, handling and use
- ISO-3587 - Glass plant, pipeline and fittings - Pipeline and fittings of nominal bore 15 to 150 mm - Compatibility and interchangeability
- ISO-4488 - Asbestos-cement pipes and joints for thrust-boring and pipe jacking
- ISO-4704 - Glass plant, pipeline and fittings -- Glass plant components
Other SDOs:
- AWWA-C655 - Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
- AWWA-C700 - Cold-Water Meters - Displacement Type, Metal Alloy Main Case
- CSA-C361 - Energy performance and drum volume of household electric clothes dryers
- DIN-EN-1916 - Concrete Pipes & Fittings, Unreinforced, Steel Fibre & Reinforced
- EN-14636-1 - Part 1: Pipes & Fittings With Flexible Joints, Plastics Piping Systems for Non-Pressur
- EN-1916 - Concrete Pipes & Fittings, Unreinforced, Steel Fibre & Reinforced
- EN-295-10 - Part 10: Performance Requirements, Vitrified Clay Pipes & Fittings & Pipe Joints for D
- SIS-CEN/TR-12108 - Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption
- SS-EN-12061 - Plastics piping systems - Thermoplastics fittings - Test methods for impact strength
- SS-EN-12585 - Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability
- SS-EN-12763 - Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery
- SS-EN-1444 - Fibre-cement pipelines - Guide for laying and on-site work practices
- SS-EN-14636-1 - Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints
- SS-EN-1916 - Concrete pipes and fittings, unreinforced, steel fibre and reinforced
- SS-EN-295-1 - Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
- SS-EN-295-10 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Performance requirements
- SS-EN-295-1-AM1 - Vitrified clay pipes and fittings and pipe jointsfor drains and sewers - Part 1: Requirements
- SS-EN-295-1-AM3 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements
- SS-EN-295-2 - Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling
- SS-EN-295-2-AM1 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 2: Quality control and sampling
- SS-EN-295-3 - Vitrified clay pipe systems for drains and sewers - Part 3: Test methods
- SS-EN-295-3-AM1 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods
- SS-EN-295-4 - Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
- SS-EN-295-5 - Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings
- SS-EN-295-5-AM1 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated vitrified clay pipes and fittings
- SS-EN-295-6 - Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers
- SS-EN-295-7 - Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
- SS-EN-512 - Fibre-cement products - Pressure pipes and joints
- SS-EN-512-AM1 - Fibre-cement products - Pressure pipes and joints
- SS-EN-588-1 - Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems
- SS-EN-639 - Common requirements for concrete pressure pipes including joints and fittings
- SS-EN-642 - Prestressed concrete pressure pipes, cylinder andnon-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
- SS-EN-ISO-13263 - Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
- SS-ENV-12108 - Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption
- SS-ISO-13953 - Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test specimens from a butt-fused joint
- UNE-127916 - Concrete pipes and fittings, unreinforced, steel fibre and reinforced. National complement to the UNE-EN 1916:2008 standard.