Document Center List of Standards on Vibrations, Shock And Vibration Measurements Including Measuring Instruments And Installations Vibration And Shock With Respect To Human Beings, See 13.160 Balancing And Balancing Machines, See 21.120.40 Vibration Protection Of Buildings, See 91.120.25
ICS Code 17.160
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D7400 - Standard Test Methods for Downhole Seismic Testing
- ASTM-E2534 - Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
- ASTM-E3081 - Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts
BSI:
- BS-5228-1 - Code of practice for noise and vibration control on construction and open sites
- BS-5228-2 - Code of practice for noise and vibration control on construction and open sites
- BS-5228-3 - Code of Practice Applicable To Surface Coal Extraction by Opencast Methods
- BS-5228-5 - Noise & Vibration Control on Construction & Open Sites, Code of Practice Applicable To
- BS-6414 - Method for Specifying Characteristics of Vibration & Shock Isolators
- BS-6472-1 - Guide to evaluation of human exposure to vibration in buildings
- BS-6794 - Method for reporting measured vibration data for land vehicles
- BS-6897-2 - Methods for experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter
- BS-6955-0 - Calibration of vibration and shock pick-ups. Guide to basic principles
- BS-6955-14 - Calibration of vibration and shock pick-ups
- BS-6955-19 - Calibration of vibration and shock pick-ups
- BS-6955-2 - Calibration of vibration and shock pick-ups
- BS-6955-22 - Calibration of vibration and shock pick-ups
- BS-6955-3 - Calibration of vibration and shock pick-ups
- BS-6955-4 - Calibration of vibration and shock pick-ups. Method for secondary shock calibration
- BS-6955-5 - Calibration of vibration and shock pick-ups
- BS-6955-6 - Calibration of vibration and shock pick-ups
- BS-6955-9 - Calibration of vibration and shock pick-ups
- BS-7853 - Mechanical vibration. Road surface profiles. Reporting of measured data
- BS-7854-6 - Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Reciprocating machines with power ratings above 100 kW
- BS-EN-1032 - Mechanical vibration. Testing of mobile machinery in order to determine the vibration emission value
- BS-EN-1033 - Hand-arm vibration. Laboratory measurement of vibration at the grip surface of hand-guided machinery. General
- BS-EN-12096 - Mechanical vibration. Declaration and verification of vibration emission values
- BS-EN-12786 - Safety of machinery. Requirements for the drafting of the vibration clauses of safety standards
- BS-EN-1299 - Mechanical vibration and shock. Vibration isolation of Machines. Information for the application of source isolation
- BS-EN-15495 - Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Zone location of AE sources
- BS-EN-30326-1 - Mechanical vibration. Laboratory method for evaluating vehicle seat vibration
- BS-EN-4662 - Aerospace series. Test specification for vibration control components
- BS-EN-61373 - Railway applications. Rolling stock equipment. Shock and vibration tests
- BS-EN-IEC-60034-14 - Rotating electrical machines
- BS-EN-IEC-60034-14-TC - Tracked Changes. Rotating electrical machines
- BS-EN-ISO-10326-1 - Mechanical vibration. Laboratory method for evaluating vehicle seat vibration
- BS-EN-ISO-10819 - Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
- BS-EN-ISO-10819-TC - Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
- BS-EN-ISO-10846-5 - Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements
- BS-ISO-10813-1 - Vibration generating machines. Guidance for selection
- BS-ISO-10813-1-TC - Tracked Changes. Vibration generating machines. Guidance for selection
- BS-ISO-10813-2 - Vibration-generating machines. Guidance for selection
- BS-ISO-10813-4 - Vibration generating machines. Guidance for selection
- BS-ISO-10814 - Mechanical Vibration. Susceptibility and Sensitivity of Machines To Unbalance
- BS-ISO-10815 - Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains
- BS-ISO-10815-TC - Tracked Changes. Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains
- BS-ISO-10816-1 - Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. General guidelines
- BS-ISO-10816-2 - Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts
- BS-ISO-10816-21 - Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts
- BS-ISO-10816-3 - Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts
- BS-ISO-10816-4 - Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts
- BS-ISO-10816-5 - Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts
- BS-ISO-10816-6 - Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts
- BS-ISO-10816-7 - Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts
- BS-ISO-10816-8 - Mechanical vibration. Measurement and evaluation of machine vibration
- BS-ISO-10817-1 - Rotating shaft vibration measuring systems
- BS-ISO-13372 - Condition monitoring and diagnostics of machines. Vocabulary
- BS-ISO-13373-1 - Condition monitoring and diagnostics of machines. Vibration condition monitoring
- BS-ISO-13373-10 - Condition monitoring and diagnostics of machines. Vibration condition monitoring.Diagnostic techniques for electrical generators with fluid-film bearings.
- BS-ISO-13373-2 - Condition monitoring and diagnostics of machines. Vibration condition monitoring
- BS-ISO-13373-2-TC - Tracked Changes. Condition monitoring and diagnostics of machines. Vibration condition monitoring
- BS-ISO-13373-3 - Condition monitoring and diagnostics of machines. Vibration condition monitoring
- BS-ISO-13373-4 - Condition monitoring and diagnostics of machines. Vibration condition monitoring
- BS-ISO-13373-7 - Condition monitoring and diagnostics of machines. Vibration condition monitoring
- BS-ISO-13373-9 - Condition monitoring and diagnostics of machines. Vibration condition monitoring
- BS-ISO-13374-2 - Condition monitoring and diagnostics of machines. Data processing, communication and presentation
- BS-ISO-13374-3 - Condition monitoring and diagnostics of machines. Data processing, communication and presentation
- BS-ISO-13374-4 - Condition monitoring and diagnostics of machine systems. Data processing, communication and presentation
- BS-ISO-13379 - Condition monitoring and diagnostics of machines. General guidelines on data interpretation and diagnostics techniques
- BS-ISO-13379-1 - Condition monitoring and diagnostics of machines. Data interpretation and diagnostics techniques
- BS-ISO-13379-2 - Condition monitoring and diagnostics of machines. Data interpretation and diagnostics techniques
- BS-ISO-13379-2-TC - Tracked Changes. Condition monitoring and diagnostics of machines. Data interpretation and diagnostics techniques
- BS-ISO-13380 - Condition monitoring and diagnostics of machines. General guidelines on using performance parameters
- BS-ISO-13381-1 - Condition monitoring and diagnostics of machines. Prognostics
- BS-ISO-13381-1-TC - Tracked Changes. Condition monitoring and diagnostics of machines. Prognostics
- BS-ISO-14695 - Industrial fans. Method of measurement of fan vibration
- BS-ISO-14830-1 - Condition monitoring and diagnostics of machine systems. Tribology-based monitoring and diagnostics
- BS-ISO-14837-1 - Mechanical vibration. Ground-borne noise and vibration arising from rail systems
- BS-ISO-14839-1 - Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings
- BS-ISO-14839-1-TC - Tracked Changes. Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings
- BS-ISO-14839-2 - Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings
- BS-ISO-14839-3 - Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings
- BS-ISO-14839-4 - Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings
- BS-ISO-14839-5 - Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings
- BS-ISO-14963 - Mechanical vibration and shock. Guidelines for dynamic tests and investigations on bridges and viaducts
- BS-ISO-14964 - Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration
- BS-ISO-15230 - Mechanical vibration and shock. Coupling forces at the man-machine interface for hand-transmitted vibration
- BS-ISO-15230-1 - Mechanical vibration and shock. Coupling forces at the man-machine interface for hand-transmitted vibration
- BS-ISO-15230-1-TC - Tracked Changes. Mechanical vibration and shock. Coupling forces at the man-machine interface for hand-transmitted vibration
- BS-ISO-15261 - Vibration and shock generating systems. Vocabulary
- BS-ISO-16063-1 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-11 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-12 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-15 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-16 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-17 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-21 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-22 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-31 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-32 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-33 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-34 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-42 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-43 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-44 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16063-45 - Methods for the calibration of vibration and shock transducers
- BS-ISO-16587 - Mechanical vibration and shock. Performance parameters for condition monitoring of structures
- BS-ISO-17359 - Condition monitoring and diagnostics of machines. General guidelines
- BS-ISO-17359-TC - Tracked Changes. Condition monitoring and diagnostics of machines. General guidelines
- BS-ISO-18129 - Condition monitoring and diagnostics of machines. Approaches for performance diagnosis
- BS-ISO-18312-1 - Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures
- BS-ISO-18312-2 - Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures
- BS-ISO-18431-1 - Mechanical vibration and shock. Signal processing
- BS-ISO-18431-2 - Mechanical vibration and shock. Signal processing
- BS-ISO-18431-3 - Mechanical vibration and shock. Signal processing
- BS-ISO-18431-4 - Mechanical vibration and shock. Signal processing
- BS-ISO-18434-1 - Condition monitoring and diagnostics of machines. Thermography
- BS-ISO-18434-2 - Condition monitoring and diagnostics of machine systems. Thermography
- BS-ISO-18436-1 - Condition monitoring and diagnostics of machine systems. Requirements for certification of personnel
- BS-ISO-18436-2 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18436-3 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18436-4 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18436-5 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18436-6 - Condition monitoring and diagnostics of machines. Requirements for certification of personnel
- BS-ISO-18436-6-TC - Tracked Changes. Condition monitoring and diagnostics of machines. Requirements for certification of personnel
- BS-ISO-18436-7 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18436-8 - Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel
- BS-ISO-18437-1 - Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials
- BS-ISO-18437-2 - Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials
- BS-ISO-18437-3 - Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials
- BS-ISO-18437-4 - Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials
- BS-ISO-18437-6 - Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials
- BS-ISO-2017-2 - Mechanical vibration and shock. Resilient mounting systems
- BS-ISO-2017-3 - Mechanical vibration and shock. Resilient mounting systems
- BS-ISO-20283-2 - Mechanical vibration. Measurement of vibration on ships
- BS-ISO-20283-5 - Mechanical vibration. Measurement of vibration on ships
- BS-ISO-20283-5-TC - Tracked Changes. Mechanical vibration. Measurement of vibration on ships
- BS-ISO-2041 - Mechanical vibration, shock and condition monitoring. Vocabulary
- BS-ISO-2041-TC - Tracked Changes. Mechanical vibration, shock and condition monitoring. Vocabulary
- BS-ISO-20816-1 - Mechanical vibration. Measurement and evaluation of machine vibration
- BS-ISO-20816-2 - Mechanical vibration. Measurement and evaluation of machine vibration
- BS-ISO-20816-3 - Mechanical vibration. Measurement and evaluation of machine vibration
- BS-ISO-20816-4 - Mechanical vibration. Measurement and evaluation of machine vibration
- BS-ISO-20816-5 - Mechanical vibration. Measurement and evaluation of machine vibration
- BS-ISO-20816-8 - Mechanical vibration. Measurement and evaluation of machine vibration
- BS-ISO-20816-8-TC - Tracked Changes. Mechanical vibration. Measurement and evaluation of machine vibration
- BS-ISO-20816-9 - Mechanical vibration. Measurement and evaluation of machine vibration
- BS-ISO-20958 - Condition monitoring and diagnostics of machine systems. Electrical signature analysis of three-phase induction motors
- BS-ISO-21289 - Mechanical vibration and shock. Parameters to be specified for the acquisition of vibration data
- BS-ISO-21984 - Ships and marine technology. Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships
- BS-ISO-22096 - Condition monitoring and diagnostics of machines. Acoustic emission
- BS-ISO-22266-1 - Mechanical vibration. Torsional vibration of rotating machinery
- BS-ISO-22266-1-TC - Tracked Changes. Mechanical vibration - Torsional vibration of rotating machinery
- BS-ISO-2954 - Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity
- BS-ISO-29821 - Condition monitoring and diagnostics of machines. Ultrasound. General guidelines, procedures and validation
- BS-ISO-29821-2 - Condition monitoring and diagnostics of machines. Ultrasound
- BS-ISO-3482 - Sip and marine technology. Technical guidelines for the active source exploration with Ocean Bottom Seismometers (OBS)
- BS-ISO-37174 - Smart community infrastructures. Disaster risk reduction. Guidance for implementing seismometer systems
- BS-ISO-4866 - Mechanical vibration and shock. Vibration of fixed structures. Guidelines for the measurement of vibrations and evaluation of their effects on structures
- BS-ISO-5309 - Civil small and light unmanned aircraft systems (UAS). Vibration test methods
- BS-ISO-5344 - Electrodynamic vibration generating systems. Performance characteristics
- BS-ISO-5348 - Mechanical vibration and shock. Mechanical mounting of accelerometers
- BS-ISO-7626-1 - Mechanical vibration and shock. Experimental determination of mechanical mobility
- BS-ISO-7626-2 - Mechanical vibration and shock. Experimental determination of mechanical mobility
- BS-ISO-7626-5 - Mechanical vibration and shock. Experimental determination of mechanical mobility
- BS-ISO-7919-2 - Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts
- BS-ISO-7919-3 - Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts
- BS-ISO-7919-4 - Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts
- BS-ISO-7919-5 - Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts
- BS-ISO-8528-9 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-ISO-8568 - Mechanical shock. Testing machines. Characteristics and performance
- BS-ISO-8608 - Mechanical vibration. Road surface profiles. Reporting of measured data
- BS-ISO-8626 - Servo-hydraulic test equipment for generating vibration. Method of describing characteristics
- DD-ENV-28041 - Human Response To Vibration, Measuring Instrumentation
- PD-6585-2 - Hand-arm vibration. Guidelines for vibration hazards reduction. Management measures at the workplace
- PD-CEN-1030-2 - Hand-arm vibration. Guidelines for vibration hazards reduction
- PD-CEN-15172-1 - Whole-body vibration. Guidelines for vibration hazards reduction. Engineering methods by design of machinery
- PD-CEN-15172-2 - Whole-body vibration. Guidelines for vibration hazards reduction
- PD-IEC-62095 - Electric cables. Calculation of current rating. Cable current rating calculations using finite element method
- PD-ISO-14837-32 - Mechanical vibration. Ground-borne noise and vibration arising from rail systems
- PD-ISO-19201 - Mechanical vibration. Methodology for selecting appropriate machinery vibration standards
- PD-ISO-19664 - Human response to vibration. Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
- PD-ISO-230-8 - Test code for machine tools
IEC:
ISO:
- ISO-10055 - Mechanical vibration - Vibration testing requirements for shipboard equipment and machinery components
- ISO-10112 - Damping materials - Graphical presentation of the complex modulus
- ISO-10811-1 - Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 1: Measurement and evaluation
- ISO-10811-2 - Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 2: Classification
- ISO-10813-1 - Vibration generating machines - Guidance for selection - Part 1: Equipment for environmental testing
- ISO-10813-2 - Vibration-generating machines - Guidance for selection - Part 2: Equipment for dynamic structural testing
- ISO-10813-4 - Vibration generating machines - Guidance for selection - Part 4: Equipment for multi-axial environmental testing
- ISO-10815 - Mechanical vibration - Measurement of vibration generated internally in railway tunnels by the passage of trains
- ISO-10816-1 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines
- ISO-10816-1/A1 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines - Amendment 1
- ISO-10816-2 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
- ISO-10816-21 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 21: Horizontal axis wind turbines with gearbox
- ISO-10816-3 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
- ISO-10816-3-AM1 - - Amendment 1
- ISO-10816-4 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine sets with fluid-film bearings
- ISO-10816-4-AM1 - - Amendment 1
- ISO-10816-5 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 5: Machine sets in hydraulic power generating and pumping plants
- ISO-10816-6 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 6: Reciprocating machines with power ratings above 100 kW
- ISO-10816-6-AM1 - - Amendment 1
- ISO-10816-7 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
- ISO-10816-8 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 8: Reciprocating compressor systems
- ISO-10817-1 - Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration
- ISO-13372 - Condition monitoring and diagnostics of machines - Vocabulary
- ISO-13373-1 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 1: General procedures
- ISO-13373-10 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 10: Diagnostic techniques for electrical generators with fluid-film bearings
- ISO-13373-2 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data
- ISO-13373-3 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 3: Guidelines for vibration diagnosis
- ISO-13373-4 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings
- ISO-13373-5 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 5: Diagnostic techniques for fans and blowers
- ISO-13373-7 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
- ISO-13373-9 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 9: Diagnostic techniques for electric motors
- ISO-13374-1 - Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 1: General guidelines
- ISO-13374-2 - Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 2: Data processing
- ISO-13374-3 - Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 3: Communication
- ISO-13374-4 - Condition monitoring and diagnostics of machine systems - Data processing, communication and presentation - Part 4: Presentation
- ISO-13379-1 - Condition monitoring and diagnostics of machines - Data interpretation and diagnostics techniques - Part 1: General guidelines
- ISO-13379-2 - Condition monitoring and diagnostics of machines - Data interpretation and diagnostics techniques - Part 2: Data-driven applications
- ISO-13381-1 - Condition monitoring and diagnostics of machines - Prognostics - Part 1: General guidelines
- ISO-14695 - Industrial fans - Method of measurement of fan vibration
- ISO-14830-1 - Condition monitoring and diagnostics of machine systems - Tribology-based monitoring and diagnostics - Part 1: General requirements and guidelines
- ISO-14837-1 - Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 1: General guidance
- ISO-14837-31 - Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
- ISO-14837-32 - Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 32: Measurement of dynamic properties of the ground
- ISO-14839-1 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 1: Vocabulary
- ISO-14839-1-AM1 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 1: Vocabulary - Amendment 1
- ISO-14839-2 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 2: Evaluation of vibration
- ISO-14839-3 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 3: Evaluation of stability margin
- ISO-14839-4 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 4: Technical guidelines
- ISO-14839-5 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 5: Touch-down bearings
- ISO-14963 - Mechanical vibration and shock - Guidelines for dynamic tests and investigations on bridges and viaducts
- ISO-15230 - Mechanical vibration and shock - Coupling forces at the man-machine interface for hand-transmitted vibration
- ISO-15261 - Vibration and shock generating systems - Vocabulary
- ISO-15261-AM1 - - Amendment 1
- ISO-16063-1 - Methods for the calibration of vibration and shock transducers - Part 1: Basic concepts
- ISO-16063-11 - Methods for the calibration of vibration and shock transducers -- Part 11: Primary vibration calibration by laser interferometry
- ISO-16063-12 - Methods for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method
- ISO-16063-13 - Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration using laser interferometry
- ISO-16063-15 - Methods for the calibration of vibration and shock transducers - Part 15: Primary angular vibration calibration by laser interferometry
- ISO-16063-16 - Methods for the calibration of vibration and shock transducers - Part 16: Calibration by Earths gravitation
- ISO-16063-17 - Methods for the calibration of vibration and shock transducers - Part 17: Primary calibration by centrifuge
- ISO-16063-1-AM1 - - Amendment 1
- ISO-16063-21 - Methods for the calibration of vibration and shock transducers -- Part 21: Vibration calibration by comparison with a reference transducer
- ISO-16063-21-AM1 - - Amendment 1
- ISO-16063-22 - Methods for the calibration of vibration and shock transducers - Part 22: Shock calibration by comparison to a reference transducer
- ISO-16063-22-AM1 - - Amendment 1
- ISO-16063-31 - Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity
- ISO-16063-32 - Methods for the calibration of vibration and shock transducers - Part 32: Resonance testing - Testing the frequency and the phase response of accelerometers by means of shock excitation
- ISO-16063-33 - Methods for the calibration of vibration and shock transducers - Part 33: Testing of magnetic field sensitivity
- ISO-16063-34 - Methods for the calibration of vibration and shock transducers - Part 34: Testing of sensitivity at fixed temperatures
- ISO-16063-41 - Methods for the calibration of vibration and shock transducers - Part 41: Calibration of laser vibrometers
- ISO-16063-42 - Methods for the calibration of vibration and shock transducers - Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
- ISO-16063-43 - Methods for the calibration of vibration and shock transducers - Part 43: Calibration of accelerometers by model-based parameter identification
- ISO-16063-44 - Methods for the calibration of vibration and shock transducers - Part 44: Calibration of field vibration calibrators
- ISO-16063-45 - Methods for the calibration of vibration and shock transducers - Part 45: In-situ calibration of transducers with built in calibration coil
- ISO-16587 - Mechanical vibration and shock - Performance parameters for condition monitoring of structures
- ISO-17359 - Condition monitoring and diagnostics of machines - General guidelines
- ISO-18129 - Condition monitoring and diagnostics of machines - Approaches for performance diagnosis
- ISO-18312-1 - Mechanical vibration and shock - Measurement of vibration power flow from machines into connected support structures - Part 1: Direct method
- ISO-18312-2 - Mechanical vibration and shock - Measurement of vibration power flow from machines into connected support structures - Part 2: Indirect method
- ISO-18431-1 - Mechanical vibration and shock - Signal processing - Part 1: General introduction
- ISO-18431-2 - Mechanical vibration and shock - Signal processing - Part 2: Time domain windows for Fourier Transform analysis
- ISO-18431-3 - Mechanical vibration and shock - Signal processing - Part 3: Methods of time-frequency analysis
- ISO-18431-4 - Mechanical vibration and shock - Signal processing - Part 4: Shock-response spectrum analysis
- ISO-18434-1 - Condition monitoring and diagnostics of machines - Thermography - Part 1: General procedures
- ISO-18434-2 - Condition monitoring and diagnostics of machine systems - Thermography - Part 2: Image interpretation and diagnostics
- ISO-18436-1 - Condition monitoring and diagnostics of machine systems - Requirements for certification of personnel - Part 1: Sector specific requirements for certification bodies and the certification process
- ISO-18436-2 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 2: Vibration condition monitoring and diagnostics
- ISO-18436-3 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 3: Requirements for training bodies and the training process
- ISO-18436-3-1 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 3: Requirements for training bodies and the training procesAmendment 1
- ISO-18436-4 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 4: Field lubricant analysis
- ISO-18436-5 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 5: Lubricant laboratory technician/analyst
- ISO-18436-6 - Condition monitoring and diagnostics of machines - Requirements for certification of personnel - Part 6: Acoustic emission
- ISO-18436-7 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 7: Thermography
- ISO-18436-8 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 8: Ultrasound
- ISO-18437-1 - Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 1: Principles and guidelines
- ISO-18437-2 - Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 2: Resonance method
- ISO-18437-2-AM1 - Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 2: Resonance method - Amendment 1
- ISO-18437-3 - Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 3: Cantilever shear beam method
- ISO-18437-3-AM1 - Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 3: Cantilever shear beam method - Amendment 1
- ISO-18437-4 - Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 4: Dynamic stiffness method
- ISO-18437-5 - Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 5: Poisson ratio based on comparison between measurements and finite element analysis
- ISO-18437-6 - Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 6: Time-temperature superposition
- ISO-18649 - Mechanical vibration - Evaluation of measurement results from dynamic tests and investigations on bridges
- ISO-19201 - Mechanical vibration - Methodology for selecting appropriate machinery vibration standards
- ISO-19283 - Condition monitoring and diagnostics of machines - Hydroelectric generating units
- ISO-19664 - Human response to vibration - Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
- ISO-2017-1 - Mechanical vibration and shock - Resilient mounting systems - Part 1: Technical information to be exchanged for the application of isolation systems
- ISO-2017-2 - Mechanical vibration and shock - Resilient mounting systems - Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
- ISO-2017-3 - Mechanical vibration and shock - Resilient mounting systems - Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
- ISO-20283-5 - Mechanical vibration - Measurement of vibration on ships - Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
- ISO-2041 - Mechanical vibration, shock and condition monitoring - Vocabulary
- ISO-20816-1 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 1: General guidelines
- ISO-20816-2 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
- ISO-20816-2-AM1 - - Amendment 1: Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min - Amendment 1
- ISO-20816-3 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r/min and 30 000 r/min
- ISO-20816-4 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings
- ISO-20816-5 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 5: Machine sets in hydraulic power generating and pump-storage plants
- ISO-20816-8 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 8: Reciprocating compressor systems
- ISO-20816-9 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 9: Gear units
- ISO-20958 - Condition monitoring and diagnostics of machine systems - Electrical signature analysis of three-phase induction motors
- ISO-21289 - Mechanical vibration and shock - Parameters to be specified for the acquisition of vibration data
- ISO-21984 - Ships and marine technology - Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships
- ISO-22096 - Condition monitoring and diagnostics of machines - Acoustic emission
- ISO-22266-1 - Mechanical vibration - Torsional vibration of rotating machinery - Part 1: Evaluation of steam and gas turbine generator sets due to electrical excitation
- ISO-23670 - Space systems - Vibration testing
- ISO-2954 - Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity
- ISO-29821 - Condition monitoring and diagnostics of machines - Ultrasound - General guidelines, procedures and validation
- ISO-29821-1 - Condition monitoring and diagnostics of machines - Ultrasound - Part 1: General guidelines
- ISO-29821-2 - Condition monitoring and diagnostics of machines - Ultrasound - Part 2: Procedures and validation
- ISO-3046-5 - Reciprocating internal combustion engines - Performance - Part 5: Torsional vibrations
- ISO-3482 - Ships and marine technology - Technical guidelines for active source exploration with ocean bottom seismometers (OBS)
- ISO-37174 - Smart community infrastructures - Disaster risk reduction - Guidance for implementing seismometer systems
- ISO-4548-7 - Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test
- ISO-4866 - Mechanical vibration and shock - Vibration of fixed structures - Guidelines for the measurement of vibrations and evaluation of their effects on structures
- ISO-5309 - Civil small and light unmanned aircraft systems (UAS) - Vibration test methods
- ISO-5344 - Electrodynamic vibration generating systems - Performance characteristics
- ISO-5344-AM1 - - Amendment 1
- ISO-5347-12 - Methods for the calibration of vibration and shock pick-ups - Part 12: Testing of transverse shock sensitivity
- ISO-5347-13 - Methods for the calibration of vibration and shock pick-ups - Part 13: Testing of base strain sensitivity
- ISO-5347-14 - Methods for the calibration of vibration and shock pick-ups - Part 14: Resonance frequency testing of undamped accelerometers on a steel block
- ISO-5347-15 - Methods for the calibration of vibration and shock pick-ups - Part 15: Testing of acoustic sensitivity
- ISO-5347-16 - Methods for the calibration of vibration and shock pick-ups - Part 16: Testing of mounting torque sensitivity
- ISO-5347-17 - Methods for the calibration of vibration and shock pick-ups - Part 17: Testing of fixed temperature sensitivity
- ISO-5347-18 - Methods for the calibration of vibration and shock pick-ups - Part 18: Testing of transient temperature sensitivity
- ISO-5347-19 - Methods for the calibration of vibration and shock pick-ups - Part 19: Testing of magnetic field sensitivity
- ISO-5347-22 - Methods for the calibration of vibration and shock pick-ups - Part 22: Accelerometer resonance testing - General methods
- ISO-5347-5 - Methods for the calibration of vibration and shock pick-ups - Part 5: Calibration by Earths gravitation'
- ISO-5347-7 - Methods for the calibration of vibration and shock pick-ups - Part 7: Primary calibration by centrifuge
- ISO-5347-8 - Methods for the calibration of vibration and shock pick-ups - Part 8: Primary calibration by dual centrifuge
- ISO-5348 - Mechanical vibration and shock - Mechanical mounting of accelerometers
- ISO-6070 - Auxiliary tables for vibration generators - Methods of describing equipment characteristics
- ISO-6954 - Mechanical vibration -- Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
- ISO-7626-1 - Mechanical vibration and shock - Experimental determination of mechanical mobility - Part 1: Basic terms and definitions, and transducer specifications
- ISO-7626-2 - Mechanical vibration and shock - Experimental determination of mechanical mobility - Part 2: Measurements using single-point translation excitation with an attached vibration exciter
- ISO-7626-5 - Mechanical vibration and shock - Experimental determination of mechanical mobility - Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
- ISO-7919-1 - Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 1: General guidelines
- ISO-7919-2 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
- ISO-7919-3 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines
- ISO-7919-3-AM1 - - Amendment 1
- ISO-7919-4 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 4: Gas turbine sets with fluid-film bearings
- ISO-7919-4-AM1 - - Amendment 1
- ISO-7919-5 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants
- ISO-8002 - Mechanical vibrations - Land vehicles - Method for reporting measured data
- ISO-8042 - Shock and vibration measurements - Characteristics to be specified for seismic pick-ups
- ISO-8528-9 - Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations
- ISO-8568 - Mechanical shock - Testing machines - Characteristics and performance
- ISO-8579-2 - Acceptance code for gears - Part 2: Determination of mechanical vibrations of gear units during acceptance testing
- ISO-8608 - Mechanical vibration - Road surface profiles - Reporting of measured data
- ISO-8626 - Servo-hydraulic test equipment for generating vibration - Method of describing characteristics
- ISO-8626-AM1 - - Amendment 1
- ISO-9688 - Mechanical vibration and shock - Analytical methods of assessing shock resistance of mechanical systems - Information exchange between suppliers and users of analyses
- SS-ISO-13373-2 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data (ISO 13373-2:2016, IDT)
Other SDOs:
- BS-ISO-13373-5 - Condition monitoring and diagnostics of machines. Vibration condition monitoring
- DIN-45669-2 - Part 2: Measuring Method, Measurement of Vibration Immission
- DIN-EN-1915-3 - Part 3: Vibration Measurement Methods & Reduction, Aircraft Ground Support Equipment
- DIN-ISO-13373-2 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data
- DIN-ISO-16063-21 - Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer
- DIN-ISO-17359 - Condition monitoring and diagnostics of machines - General guidelines
- DIN-ISO-7919-5 - Mechanical Vibration, Evaluation of Machine Vibration by Measurements on Rotating Shaf
- EN-12096 - Mechanical Vibration, Declaration & Verification of Vibration Emission Values
- EN-12786 - Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards
- EN-1299 - Mechanical Vibration & Shock - Vibration Isolation of Machines - Information for the A
- EN-15495 - Non-Destructive Testing, Acoustic Emission, Examination of Metallic Pressure Equipment
- EN-1915-3 - Part 3: Vibration Measurement Methods & Reduction, Aircraft Ground Support Equipment,
- EN-4662 - Aerospace Series - Test Specification for Vibration Control Components
- EN-61373 - Railway Applications - Rolling Stock Equipment - Shock & Vibration Tests
- EN-ISO-10846-5 - Part 5: Driving Point Method for Determination of the Low-Frequency Transfer Stiffnes
- JIS-B-0906 - Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- General guidelines
- JIS-B-0910 - Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- General guidelines
- JIS-B-0912-1 - Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 1: Requirements for certifying bodies and the certification process
- JIS-B-0912-2 - Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 2: Vibration condition monitoring and diagnostics
- JIS-B-1754 - Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing
- JIS-B-7760-1 - Whole-body vibration -- Part 1: Measuring instrumentation
- SIS-CEN-ISO/TR-19664 - Human response to vibration - Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety (ISO/TR 19664:2017)
- SIS-CEN/TR-15172-1 - Whole-body vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery
- SIS-CEN/TR-15172-2 - Whole-body vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace
- SIS-ISO/TS-10811-1 - Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 1: Measurement and evaluation
- SIS-ISO/TS-10811-2 - Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 2: Classification
- SIS-ISO/TS-15230-2 - Mechanical vibration and shock Coupling forces at the man-machine interface for hand-transmitted vibration Part 2: Guidelines for the evaluation of coupling forces (ISO/TS 15230-2:2023, IDT)
- SS-EN-1032 - Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
- SS-EN-1032-AM1 - Mechanical vibration - Testing of mobile machinery in order to determine the whole-body vibration emission value - General - Amendment 1
- SS-EN-1033 - Hand-arm vibration - Laboratory measurement of vibration at the grip surface of hand-guided machinery - General
- SS-EN-12096 - Mechanical vibration - Declaration and verification of vibration emission values
- SS-EN-12786 - Safety of machinery - Rules for the drafting of the vibration clauses of safety standards
- SS-EN-1299 - Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
- SS-EN-15495 - Non destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources
- SS-EN-1915-3 - Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction
- SS-EN-30326-1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements
- SS-EN-30326-1-AM1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements Amendment 1(ISO 10326-1:1992/Amd 1:2007)
- SS-EN-30326-1-AM2 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements - Amendment 2 (ISO 10326-1:1992/Amd 2:2011)
- SS-EN-4662 - Aerospace series - Test specification for vibration control components
- SS-EN-ISO-10326-1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016)
- SS-EN-ISO-10846-5 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008)
- SS-EN-ISO-1680 - Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
- SS-ENV-28041 - Human response to vibration - Measuring instrumentation (ISO 8041:1990/Amd 1:1999)
- SS-ISO-10303-503 - Industrial automation systems and integration - Product data representation and exchange - Part 503: Application interpreted construct: Geometrically bounded 2D wireframe (ISO 10303-503:2000/Cor 1:2006, IDT)
- SS-ISO-10326-1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements
- SS-ISO-10326-1-AM1 - Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992/Amd 1:2007, IDT)
- SS-ISO-10814 - Mechanical vibration - Susceptibility and sensitivity of machines to unbalance
- SS-ISO-10816-1 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part1: General guidelines
- SS-ISO-10816-1-AM1 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines - Amendment 1 (ISO 10816-1:1995/Amd 1:2009, IDT)
- SS-ISO-10816-2 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min (ISO 10816-2:2009, IDT)
- SS-ISO-10816-3 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ (ISO 10816-3:2009, IDT)
- SS-ISO-10816-3-AM1 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ (ISO 10816-3:2009/Amd 1:2017, MOD)
- SS-ISO-10816-4 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine sets with fluid-film bearings (ISO 10816-4:2009, IDT)
- SS-ISO-10816-5 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 5: Machine sets in hydraulic power generating and pumping plants
- SS-ISO-10816-6 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part6: Reciprocating machines with power ratings above 100 kW
- SS-ISO-10816-6-AM1 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 6: Reciprocating machines with power ratings above 100 kW (ISO 10816-6:1995/Amd 1:2015, IDT)
- SS-ISO-10816-7 - Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts (ISO 10816-7:2009, IDT)
- SS-ISO-13372 - Condition monitoring and diagnostics of machines - Vocabulary (ISO 13372:2012, IDT)
- SS-ISO-13373-1 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 1: General procedures (ISO 13373-1:2002, IDT)
- SS-ISO-13373-3 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 3: Guidelines for vibration diagnosis (ISO 13373-3:2015, IDT)
- SS-ISO-13373-4 - Condition monitoring and diagnostics of machines Vibration condition monitoring Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings (ISO 13373-4:2021, IDT)
- SS-ISO-13373-5 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 5: Diagnostic techniques for fans and blowers (ISO 13373-5:2020, IDT)
- SS-ISO-13373-7 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants (ISO 13373-7:2017, IDT)
- SS-ISO-13373-9 - Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 9: Diagnostic techniques for electric motors (ISO 13373-9:2017, IDT)
- SS-ISO-13374-1 - Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 1: General guidelines
- SS-ISO-13374-2 - Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 2: Data processing (ISO 13374-2:2007, IDT)
- SS-ISO-13379 - Condition monitoring and diagnostics of machines - General guidelines on data interpretation and diagnostics techniques
- SS-ISO-13379-1 - Condition monitoring and diagnostics of machines - Data interpretation and diagnostics techniques - Part 1: General quidelines (ISO 13379-1:2012, IDT)
- SS-ISO-13379-2 - Condition monitoring and diagnostics of machines - Data interpretation and diagnostics techniques - Part 2: Data-driven applications (ISO 13379-2:2015, IDT)
- SS-ISO-13381-1 - Condition monitoring and diagnostics of machines - Prognostics - Part 1: General guidelines (ISO 13381-1:2004, IDT)
- SS-ISO-14837-1 - Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 1: General guidance (ISO 14837-1:2005, IDT)
- SS-ISO-14839-1 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 1: Vocabulary (ISO 14839-1:2002, IDT)
- SS-ISO-14839-1-AM1 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 1: Vocabulary - Amendment 1 (ISO 14839-1:2002/Amd 1:2010, IDT)
- SS-ISO-14839-2 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 2: Evaluation of vibration (ISO 14839-2:2004, IDT)
- SS-ISO-14839-3 - Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 3: Evaluation of stability margin (ISO 14839-3:2006, IDT)
- SS-ISO-14963 - Mechanical vibration and shock - Guidelines for dynamic tests and investigations on bridges and viaducts (ISO 14963:2003, IDT)
- SS-ISO-15230-1 - Mechanical vibration and shock Coupling forces at the man-machine interface for hand-transmitted vibration Part 1: Measurement and evaluation (ISO 15230-1:2021, IDT)
- SS-ISO-15261 - Vibration and shock generating systems - Vocabulary (ISO 15261:2004, IDT)
- SS-ISO-16063-1 - Methods for the calibration of vibration and shock transducers - Part 1: Basic concepts
- SS-ISO-16063-11 - Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry
- SS-ISO-16063-13 - Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration using laser interferometry
- SS-ISO-16063-15 - Methods for the calibration of vibration and shock transducers - Part 15: Primary angular vibration calibration by laser interferometry (ISO 16063-15:2006, IDT)
- SS-ISO-16063-21 - Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer
- SS-ISO-16063-31 - Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity (ISO 16063-31:2009, IDT)
- SS-ISO-16063-41 - Methods for the calibration of vibration and shock transducers - Part 41: Calibration of laser vibrometers (ISO 16063-41:2011, IDT)
- SS-ISO-16587 - Mechanical vibration and shock - Performance parameters for condition monitoring of structures (ISO 16587:2004, IDT)
- SS-ISO-17359 - Condition monitoring and diagnostics of machines - General guidelines
- SS-ISO-18431-2 - Mechanical vibration and shock - Signal processing - Part 2: Time domain windows for Fourier Transform analysis (ISO 18431-2:2004, IDT)
- SS-ISO-18436-1 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 1: Requirements for assessment bodies and the assessment process (ISO 18436-1:2012 Corrected version 2013-01-15, IDT)
- SS-ISO-18436-5 - Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 5: Lubricant laboratory technician/analyst (ISO 18436-5:2012, IDT)
- SS-ISO-18649 - Mechanical vibration - Evaluation of measurement results from dynamic tests and investigations on bridges (ISO 18649:2004, IDT)
- SS-ISO-2017 - Vibration and shock - Isolators - Procedure for specifying characteristics
- SS-ISO-2017-1 - Mechanical vibration and shock - Resilient mounting systems - Part 1: Technical information to be exchanged for the application of isolation systems (ISO 2017-1:2005, IDT)
- SS-ISO-2017-2 - Mechanical vibration and shock - Resilient mounting systems - Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems (ISO 2017-2:2008, IDT)
- SS-ISO-2041 - Mechanical vibration, shock and condition monitoring - Vocabulary (ISO 2041:2018, IDT)
- SS-ISO-20816-1 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 1: General guidelines (ISO 20816-1:2016, IDT)
- SS-ISO-20816-2 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min (ISO 20816-2:2017, IDT)
- SS-ISO-20816-3 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 3: Coupled industrial machines (ISO 20816-3:2022, IDT)
- SS-ISO-20816-4 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbine sets in excess of 3 MW, with fluid-film bearings (ISO 20816-4:2018, IDT)
- SS-ISO-20816-5 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 5: Machine sets in hydraulic power generating and pump-storage plants (ISO 20816-5:2018, IDT)
- SS-ISO-20816-8 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 8: Reciprocating compressor systems (ISO 20816-8:2018, IDT)
- SS-ISO-20816-9 - Mechanical vibration - Measurement and evaluation of machine vibration - Part 9: Gear units (ISO 20816-9:2020, IDT)
- SS-ISO-22096 - Condition monitoring and diagnostics of machines - Acoustic emission (ISO 22096:2007, IDT)
- SS-ISO-22266-1 - Mechanical vibration - Torsional vibration of rotating machinery - Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW (ISO 22266-1:2022, IDT)
- SS-ISO-2954 - Vibration and shock - Requirements for instruments for vibration measurement
- SS-ISO-4866 - Mechanical vibration and shock - Vibration of fixed structures - Guidelines for the measurement of vibrations and evaluation of their effects on structures (ISO 4866:2010, IDT)
- SS-ISO-4866-AM1 - Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings. Amendment 1
- SS-ISO-4866-AM2 - Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings. Amendment 2
- SS-ISO-5347 - Methods for the calibration of vibration and shock pick-ups - Part 9: Secondary vibration calibration by comparison of phase angles
- SS-ISO-5347-0 - Methods for the calibration of vibration and shock pick-ups - Part 0: Basic concepts
- SS-ISO-5347-1 - Methods for the calibration of vibration and shock pick-ups - Part 1: Primary vibration calibrationby laser interferometry
- SS-ISO-5347-10 - Methods for the calibration of vibration and shock pick-ups - Part 10: Primary calibration by high impact shocks
- SS-ISO-5347-11 - Methods for the calibration of vibration and shock pick-ups - Part 11: Testing of transverse vibration sensitivity
- SS-ISO-5347-12 - Methods for the calibration of vibration and shock pick-ups - Part 12: Testing of transverse shock sensitivity
- SS-ISO-5347-13 - Methods for the calibration of vibration and shock pick-ups - Part 13: Testing of base strain sensitivity
- SS-ISO-5347-14 - Methods for the calibration of vibration and shock pick-ups - Part 14: Resonance frequency testing of undamped accelerometers on a steel block
- SS-ISO-5347-15 - Methods for the calibration of vibration and shock pick-ups - Part 15: Testing of acoustic sensitivity
- SS-ISO-5347-16 - Methods for the calibration of vibration and shock pick-ups - Part 16: Testing of mounting torque sensitivity
- SS-ISO-5347-17 - Methods for the calibration of vibration and shock pick-ups - Part 17: Testing of fixed temperaturesensitivity
- SS-ISO-5347-18 - Methods for the calibration of vibration and shock pick-ups - Part 18: Testing of transient temperature sensitivity
- SS-ISO-5347-19 - Methods for the calibration of vibration and shock pick-ups - Part 19: Testing of magnetic field sensitivity
- SS-ISO-5347-2 - Methods for the calibration of vibration and shock pick-ups - Part 2: Primary shock calibration by light cutting
- SS-ISO-5347-20 - Methods for the calibration of vibration and shock pick-ups - Part 20: Primary vibration calibration by the reciprocity method
- SS-ISO-5347-22 - Methods for the calibration of vibration and shock pick-ups - Part 22: Accelerometer resonance testing - General methods
- SS-ISO-5347-3 - Methods for the calibration of vibration and shock pick-ups - Part 3: Secondary vibration calibration
- SS-ISO-5347-4 - Methods for the calibration of vibration and shock pick-ups - Part 4: Secondary shock calibration
- SS-ISO-5347-5 - Methods for the calibration of vibration and shock pick-ups - Part 5: Calibration by Earth's gravitation
- SS-ISO-5347-6 - Methods for the calibration of vibration and shock pick-ups - Part 6: Primary vibration calibrationat low frequencies
- SS-ISO-5347-7 - Methods for the calibration of vibration and shock pick-ups - Part 7: Primary calibration by centrifuge
- SS-ISO-5347-8 - Methods for the calibration of vibration and shock pick-ups - Part 8: Primary calibration by dual centrifuge
- SS-ISO-5348 - Mechanical vibration and shock - Mechanical mounting of accelerometers
- SS-ISO-6954 - Mechanical vibration - Guidelines for the measurement, reporting and evaluation of vibration in merchant ships
- SS-ISO-7626-1 - Vibration and shock - Experimental determination of mechanical mobility - Basic definitions and transducers
- SS-ISO-7626-5 - Vibration and shock - Experimental determination of mechanical mobility - Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
- SS-ISO-7919-1 - Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluationof criteria - Part 1: General guidelines
- SS-ISO-7919-2 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min (ISO 7919-2:2009, IDT)
- SS-ISO-7919-3 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines (ISO 7919-3:2009, IDT)
- SS-ISO-7919-3-AM1 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines (ISO 7919-3:2009/Amd 1:2017, IDT)
- SS-ISO-7919-4 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 4: Gas turbine sets with fluid-film bearings (ISO 7919-4:2009, IDT)
- SS-ISO-7919-5 - Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants (ISO 7919-5:2005, IDT)
- SS-ISO-8002 - Vibration and shock - Mechanical vibrations - Land vehicles - Method for reporting measured data
- SS-ISO-8041 - Human respons to vibration - Measuring instrumentation
- SS-ISO-8042 - Shock and vibration - Characteristics to be specified for seismic transductors
- SS-ISO-8569 - Mechanical vibration and shock - Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings (ISO 8569:1996, IDT)
- SS-ISO-8626 - Servo-hydraulic test equipment for generating vibration - Method of describing characteristics