Document Center List of Standards on Measuring Instruments
ICS Code 17.040.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1030 - Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
- ASTM-D7299 - Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
- ASTM-D7759 - Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
- ASTM-E1685 - Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
BSI:
- BS-1044-1 - Specification for gauge blanks
- BS-1054 - Specification for engineers' comparators for external measurement
- BS-1347 - Specification for architects', engineers' and surveyors' metric scale rules
- BS-1643 - Specification for precision vernier height gauges
- BS-1685 - Bevel protractors (mechanical and optical). Requirements and test methods
- BS-1734 - Specification for micrometer heads
- BS-2795 - Specification for Dial Test Indicators (Lever Type) for Linear Measurement
- BS-3064 - Specification for metric sine bars and sine tables (excluding compound tables)
- BS-3123 - Specification for spring calipers and spring dividers
- BS-3509 - Specification for spirit level vials
- BS-3846 - Methods for calibration and grading of extensometers for testing of metals
- BS-4035 - Specification for linear measuring instruments for use on building and civil engineering constructional works. Steel measuring tapes, steel bands and retractable steel pocket rules
- BS-4064 - Specification for plain setting rings for use with internal diameter measuring machines. Metric units
- BS-4311 - Gauge Blocks Manufactured To Imperial Specification, Specification, Validation & Acces
- BS-4311-1 - Gauge blocks manufactured to imperial specification
- BS-4311-2 - Gauge blocks manufactured to imperial specification
- BS-4372 - Specification for engineers' steel measuring rules
- BS-4484-1 - Specification for measuring instruments for constructional works
- BS-6365 - Specification for precision vernier depth gauges
- BS-6468 - Specification for depth micrometers
- BS-6740 - Method for determining departures from roundness by measuring variations in radius
- BS-6808-3 - Coordinate measuring machines
- BS-817 - Specification for surface plates
- BS-852 - Specification for toolmakers' straightedges
- BS-869 - Specification for toolmakers' flats and high precision surface plates
- BS-870 - Specification for external micrometers
- BS-887 - Precision vernier callipers. Requirements and test methods
- BS-906-1 - Specification for engineers' parallels
- BS-906-2 - Specification for engineers' parallels.
- BS-907 - Specification for dial gauges for linear measurement
- BS-939 - Engineers' squares (including cylindrical and block squares). Specification
- BS-957 - Specification for feeler gauges
- BS-957-1 - Part 1: Feeler Gauges, British Standard Specification
- BS-957-2 - Metric Units
- BS-958 - Specification for spirit levels for use in precision engineering
- BS-959 - Specification for internal micrometers (including stick micrometers)
- BS-EN-10002-4 - Tensile testing of metallic materials. Verification of extensometers used in uniaxial testing
- BS-EN-14359 - Gas-loaded accumulators for fluid power applications
- BS-EN-60061-3 - Lamp caps and holders together with gauges for the control of interchangeability and safety
- BS-EN-ISO-10360-1 - Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)
- BS-EN-ISO-10360-10 - Tracked Changes. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS)
- BS-EN-ISO-10360-10-TC - Tracked Changes. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS)
- BS-EN-ISO-10360-12 - Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS)
- BS-EN-ISO-10360-13 - Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS)
- BS-EN-ISO-10360-2 - Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)
- BS-EN-ISO-10360-3 - Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)
- BS-EN-ISO-10360-4 - Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)
- BS-EN-ISO-10360-5 - Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS)
- BS-EN-ISO-10360-6 - Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)
- BS-EN-ISO-10360-9 - Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS)
- BS-EN-ISO-12179-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
- BS-EN-ISO-13102 - Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
- BS-EN-ISO-13225 - Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics
- BS-EN-ISO-13385-1 - Geometrical product specifications (GPS). Dimensional measuring equipment
- BS-EN-ISO-13385-2 - Geometrical product specifications (GPS). Dimensional measuring equipment
- BS-EN-ISO-14978 - Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
- BS-EN-ISO-14978-TC - Tracked Changes. Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
- BS-EN-ISO-15530-3 - Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement
- BS-EN-ISO-16610-60 - Geometrical Product Specification (GPS). Filtration
- BS-EN-ISO-1938-2 - Geometrical product specifications (GPS). Dimensional measuring equipment
- BS-EN-ISO-25178-1 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-3040 - Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
- BS-EN-ISO-3040-TC - Tracked Changes. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
- BS-EN-ISO-3611-TC - Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements
- BS-EN-ISO-463 - Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
- BS-EN-ISO-5436-2 - Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards
- BS-EN-ISO-9513 - Metallic materials. Calibration of extensometer systems used in uniaxial testing
- BS-ISO-16239 - Metric series wires for measuring screw threads
- DD-CEN-ISO-15530-3 - Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement
- DD-ENV-12647 - Bar coding. Test specifications for bar code verifiers
- DD-ISO-15530-4 - Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement
- DD-ISO-23165 - Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
- DD-ISO/PAS-12868 - Geometrical product specification (GPS). Coordinate measuring machines (CMM). Testing the performance of CMMs using single-stylus contacting probing systems
- PD-CEN-ISO-15530-1 - Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement
ISO:
- ISO-10360-1 - Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 1: Vocabulary
- ISO-10360-10 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers
- ISO-10360-12 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM)
- ISO-10360-13 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS
- ISO-10360-2 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions
- ISO-10360-3 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis
- ISO-10360-4 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode
- ISO-10360-5 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode
- ISO-10360-6 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
- ISO-10360-7 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems
- ISO-10360-8 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors
- ISO-10360-9 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems
- ISO-12179 - Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
- ISO-13102 - Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics
- ISO-13225 - Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics
- ISO-13385-1 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers
- ISO-13385-2 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges
- ISO-14978 - Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment
- ISO-1502 - ISO general-purpose metric screw threads - Gauges and gauging
- ISO-15530-1 - Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics
- ISO-15530-3 - Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
- ISO-15530-4 - Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation
- ISO-16239 - Metric series wires for measuring screw threads
- ISO-3274 - Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
- ISO-3599 - Vernier callipers reading to 0,1 and 0,05 mm
- ISO-3611 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements
- ISO-3650 - Geometrical Product Specifications (GPS) - Length standards - Gauge blocks
- ISO-463 - Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges
- ISO-5436-1 - Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures
- ISO-5436-2 - Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards
- ISO-5463 - Geometrical product specifications (GPS) - Rotary axis form-measuring instruments - Design and metrological characteristics
- ISO-6906 - Vernier callipers reading to 0,02 mm
- ISO-7863 - Height setting micrometers and riser blocks
- ISO-8512-1 - Surface plates - Part 1: Cast iron
- ISO-8512-2 - Surface plates - Part 2: Granite
- ISO-9493 - Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics
- ISO/PAS-12868 - Geometrical Product Specification (Gps) - Coordinate Measuring Machines (Cmm): Testin
- ISO-R-463 - See: ISO-463
Other SDOs:
- DIN-2271-3 - Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high-pressure range - requirements, testing
- DIN-32877 - Optoelectronic Measurement of Form, Profile & Distance
- DIN-874-1 - Part 1: Steel Straightedges - Dimensions & Technical Delivery Conditions, Straightedge
- DIN-874-2 - Part 2: Knife-Edge Straightedges - Dimensions & Technical Delivery Conditions, Straigh
- DIN-878 - Geometrical Product Specifications (Gps) - Mechanical Dial Gauges - Limits for Metrolo
- DIN-EN-ISO-10360-2 - Part 2: Cmms Used for Measuring Linear Dimensions, Geometrical Product Specifications
- DIN-EN-ISO-14978 - Geometrical Product Specifications (Gps) - General Concepts & Requirements for Gps Me
- DIN-EN-ISO-2692 - Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
- DIN-EN-ISO-463 - Geometrical Product Specifications (Gps) - Dimensional Measuring Equipment - Design &
- EN-14359 - Gas-loaded accumulators for fluid power applications
- EN-ISO-10360-10 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances
- EN-ISO-10360-12 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM)
- EN-ISO-10360-2 - Part 2: Cmms Used for Measuring Linear Dimensions, Geometrical Product Specifications
- EN-ISO-10360-6 - Part 6: Estimation of Errors in Computing Gaussian Associated Features - Gps - Accepta
- EN-ISO-10360-7 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
- EN-ISO-10360-8 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
- EN-ISO-10360-9 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
- EN-ISO-13102 - Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
- EN-ISO-13225 - Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
- EN-ISO-13385-1 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics
- EN-ISO-13385-2 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics
- EN-ISO-14978 - Geometrical Product Specifications (Gps) - General Concepts & Requirements for Gps Me
- EN-ISO-15530-3 - Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
- EN-ISO-16610-60 - Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts
- EN-ISO-1938-2 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges
- EN-ISO-25178-1 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture
- EN-ISO-463 - Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges
- EN-ISO-5436-2 - Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
- EN-ISO-9493 - Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics
- JIS-B-0251 - Limit gauges for metric screw threads
- JIS-B-0651 - Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
- JIS-B-0651-AM1 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments (Amendment 1)
- JIS-B-0659-1 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 1: Material measures
- JIS-B-0670 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Calibration of contact (stylus) instruments
- JIS-B-0671-1 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions
- JIS-B-0671-1-AM1 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions (Amendment 1)
- JIS-B-0671-2 - Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve
- JIS-B-7440-2 - Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring linear dimensions
- JIS-B-7440-3 - Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 3: CMM's with the axis of a rotary table as the fourth axis
- JIS-B-7451 - Instruments for the assessment of departure from roundness -- Measurement of variations in radius
- JIS-B-7503 - Mechanical dial gauges
- JIS-B-7506 - Gauge blocks
- SIS-CEN-ISO/TS-15530-1 - Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013)
- SIS-ISO-17865 - Geometrical Product Specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems (ISO/TS 17865:2016, IDT)
- SIS-ISO/PAS-12868 - Geometrical product specification (GPS) - Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems (ISO/PAS 12868:2009, IDT)
- SIS-ISO/TS-12180-1 - Geometrical Product Specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form
- SIS-ISO/TS-12180-2 - Geometrical Product Specifications (GPS) - Cylindricity - Part 2: Specification operators
- SIS-ISO/TS-12181-1 - Geometrical Product Specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness
- SIS-ISO/TS-12181-2 - Geometrical Product Specifications (GPS) - Roundness - Part 2: Specification operators
- SIS-ISO/TS-15530-3 - Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004, IDT)
- SIS-ISO/TS-15530-4 - Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 4: Evaluating task-specific measurement uncertainty using simulation (ISO/TS 15530-4:2008, IDT)
- SIS-ISO/TS-16610-1 - Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts
- SIS-ISO/TS-16610-20 - Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts
- SIS-ISO/TS-16610-22 - Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters
- SIS-ISO/TS-16610-29 - Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets
- SIS-ISO/TS-16610-40 - Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts
- SIS-ISO/TS-16610-41 - Geometrical product specifications (GPS) -Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters
- SIS-ISO/TS-16610-49 - Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques
- SIS-ISO/TS-23165 - Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
- SMS-9009 - ISO system for inspection of plain workpieces - Tolerances and basic size limits for gauges for holes and for shafts - Synoptic table over Swedish standards
- SS-21211 - Building construction - Surveying - Range rods
- SS-21212 - Building survey - Permanent point on wall - Plateand bracket
- SS-21213 - Measurement in building - Instruments and ancillary devices - Short range reflectors
- SS-EN-10002-4 - Metallic materials - Tensile testing - Part 4: Verification of extensometers used in uniaxial testing
- SS-EN-10226-3 - Pipe threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges
- SS-EN-13001-2 - Crane safety - General design - Part 2: Load actions
- SS-EN-14359 - Gas-loaded accumulators for fluid power applications
- SS-EN-1993-1-8 - Eurocode 3: Design of steel structures - Part 1-8: Design of joints
- SS-EN-ISO-1 - Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
- SS-EN-ISO-10135 - Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
- SS-EN-ISO-10360-1 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000)
- SS-EN-ISO-10360-10 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
- SS-EN-ISO-10360-12 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
- SS-EN-ISO-10360-13 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021)
- SS-EN-ISO-10360-2 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
- SS-EN-ISO-10360-3 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis (ISO 10360-3:2000)
- SS-EN-ISO-10360-4 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000)
- SS-EN-ISO-10360-5 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)
- SS-EN-ISO-10360-6 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
- SS-EN-ISO-10360-7 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
- SS-EN-ISO-10360-8 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
- SS-EN-ISO-10360-9 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
- SS-EN-ISO-1101 - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
- SS-EN-ISO-12179 - Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
- SS-EN-ISO-12180-1 - Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
- SS-EN-ISO-12180-2 - Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
- SS-EN-ISO-12181-1 - Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
- SS-EN-ISO-12181-2 - Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
- SS-EN-ISO-13102 - Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
- SS-EN-ISO-13225 - Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
- SS-EN-ISO-13385-1 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
- SS-EN-ISO-13385-2 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
- SS-EN-ISO-14978 - Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
- SS-EN-ISO-15530-3 - Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
- SS-EN-ISO-16610-20 - Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015)
- SS-EN-ISO-16610-29 - Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets (ISO 16610-29:2015)
- SS-EN-ISO-16610-40 - Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015)
- SS-EN-ISO-16610-41 - Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)
- SS-EN-ISO-16610-49 - Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015)
- SS-EN-ISO-16610-60 - Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)
- SS-EN-ISO-1938-1 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
- SS-EN-ISO-1938-2 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
- SS-EN-ISO-22432 - Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
- SS-EN-ISO-25178-1 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
- SS-EN-ISO-2692 - Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)
- SS-EN-ISO-3040 - Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
- SS-EN-ISO-3274 - Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996)
- SS-EN-ISO-3611 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
- SS-EN-ISO-3650 - Geometrical Product Specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998)
- SS-EN-ISO-463 - Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006, IDT)
- SS-EN-ISO-5436-1 - Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000)
- SS-EN-ISO-5436-2 - Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
- SS-EN-ISO-887 - Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)
- SS-EN-ISO-9493 - Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
- SS-ISO-1 - Standard reference temperature for industrial length measurements
- SS-ISO-10135 - Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007, IDT)
- SS-ISO-1101 - Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
- SS-ISO-228-2 - Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges
- SS-ISO-37 - Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties (ISO 37:2017, IDT)
- SS-ISO-7-2 - Pipe threads where pressure-tight joints are madeon the threads - Part 2: Verification by means oflimit gauges
- SS-ISO-7863 - Height setting micrometers and riser blocks
- SS-ISO-8512-1 - Surface plates - Part 1: Cast iron
- SS-ISO-8512-2 - Surface plates - Part 2: Granite
- UNE-EN-ISO-17450-3 - Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features
- UNE-EN-ISO-25178-1 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture