15.03: Space Simulation; Aerospace and Aircraft; Composite Materials
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C271 - Standard Test Method for Density of Sandwich Core Materials
- ASTM-C272 - Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions
- ASTM-C273 - Standard Test Method for Shear Properties of Sandwich Core Materials
- ASTM-C274 - Standard Terminology of Structural Sandwich Constructions (Withdrawn 2016)
- ASTM-C297 - Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
- ASTM-C363 - Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
- ASTM-C364 - Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
- ASTM-C365 - Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
- ASTM-C366 - Standard Test Methods for Measurement of Thickness of Sandwich Cores
- ASTM-C393 - Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
- ASTM-C394 - Standard Test Method for Shear Fatigue of Sandwich Core Materials
- ASTM-C480 - Standard Test Method for Flexure Creep of Sandwich Constructions
- ASTM-C481 - Standard Test Method for Laboratory Aging of Sandwich Constructions
- ASTM-C613 - Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
- ASTM-D2344 - Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
- ASTM-D2389 - Standard Test Method for Minimum Pressure for Vapor Phase Ignition of Monopropellents (Withdrawn 2003)
- ASTM-D2507 - Standard Terminology of Rheological Properties of Gelled Rocket Propellants
- ASTM-D2508 - Standard Test Method for Solid Rocket Propellant Specific Impulse Measurements
- ASTM-D2512 - Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) (Withdrawn 2023)
- ASTM-D2539 - Standard Test Method for Shock Sensitivity of Liquid Monopropellants by the Card-Gap Test
- ASTM-D2540 - Standard Test Method for Drop-Weight Sensitivity of Liquid Monopropellants (Withdrawn 2003)
- ASTM-D2541 - Standard Test Method for Critical Diameter and Detonation Velocity of Liquid Monopropellants (Withdrawn 2003)
- ASTM-D2586 - Standard Test Method for Hydrostatic Compressive Strength of Glass-Reinforced Plastic Cylinders (Withdrawn 1996)
- ASTM-D3039 - Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- ASTM-D3171 - Standard Test Methods for Constituent Content of Composite Materials
- ASTM-D3317 - Specification for High Modulus, Organix Yarn and Roving (Withdrawn 1986)
- ASTM-D3318 - Specification for Woven Cloth From High Modulus Organic Fiber (Withdrawn 1984)
- ASTM-D3410 - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
- ASTM-D3479 - Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
- ASTM-D3518 - Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
- ASTM-D3529 - Standard Test Methods for Constituent Content of Composite Prepreg
- ASTM-D3529M - Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
- ASTM-D3530 - Standard Test Method for Volatiles Content of Composite Material Prepreg
- ASTM-D3531 - Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
- ASTM-D3532 - Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
- ASTM-D3544 - Standard Guide for Reporting Test Methods and Results on High Modulus Fibers (Withdrawn 2003)
- ASTM-D3552 - Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
- ASTM-D3553 - Standard Test Method for Fiber Content by Digestion of Reinforced Metal Matrix Composites (Withdrawn 2000)
- ASTM-D3800 - Standard Test Method for Density of High-Modulus Fibers
- ASTM-D3800M - Standard Test Method for Density of High-Modulus Fibers
- ASTM-D3878 - Standard Terminology for Composite Materials
- ASTM-D4018 - Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
- ASTM-D4102 - Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
- ASTM-D4255 - Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
- ASTM-D4762 - Standard Guide for Testing Polymer Matrix Composite Materials
- ASTM-D5229 - Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
- ASTM-D5300 - Standard Test Method for Measurement of Resin Content and Other Related Properties of Polymer Matrix Thermoset Prepreg by Combined Mechanical and Ultrasonic Methods (Withdrawn 2000)
- ASTM-D5379 - Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
- ASTM-D5448 - Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM-D5449 - Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM-D5450 - Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
- ASTM-D5467 - Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
- ASTM-D5528 - Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM-D5687 - Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
- ASTM-D5766 - Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
- ASTM-D5961 - Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
- ASTM-D6115 - Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM-D6264 - Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
- ASTM-D6308 - Guide for Identification of Composite Materials in Computerized Material Property Databases. (Withdrawn 1999)
- ASTM-D6415 - Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
- ASTM-D6416 - Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
- ASTM-D6484 - Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
- ASTM-D6507 - Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
- ASTM-D6641 - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
- ASTM-D6671 - Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
- ASTM-D6742 - Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
- ASTM-D6772 - Standard Test Method for Dimensional Stability of Sandwich Core Materials
- ASTM-D6790 - Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
- ASTM-D6856 - Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials
- ASTM-D6873 - Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
- ASTM-D7028 - Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
- ASTM-D7078 - Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
- ASTM-D7136 - Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
- ASTM-D7137 - Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
- ASTM-D7205 - Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
- ASTM-D7248 - Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
- ASTM-D7249 - Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
- ASTM-D7250 - Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
- ASTM-D7264 - Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM-D7290 - Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
- ASTM-D7291 - Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
- ASTM-D7332 - Standard Test Method for Measuring the Fastener Pull-Through Resistance of a
Fiber-Reinforced Polymer Matrix Composite - ASTM-D7336 - Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
- ASTM-D7337 - Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
- ASTM-D7522 - Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete Substrate
- ASTM-D7565 - Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
- ASTM-D7615 - Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
- ASTM-D7616 - Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
- ASTM-D7617 - Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
- ASTM-D7705 - Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
- ASTM-D7750 - Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
- ASTM-D7766 - Standard Practice for Damage Resistance Testing of Sandwich Constructions
- ASTM-D7905 - Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM-D7913 - Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
- ASTM-D7914 - Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
- ASTM-D7956 - Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
- ASTM-D7957 - Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
- ASTM-D7958 - Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test
- ASTM-D8066 - Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates
- ASTM-D8067 - Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
- ASTM-D8101 - Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
- ASTM-D8131 - Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
- ASTM-D8132 - Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement
- ASTM-D8335 - Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials
- ASTM-D8336 - Standard Test Method for Characterizing Tack of Prepregs Using a Continuous Application-and-Peel Procedure
- ASTM-E1216 - Standard Practice for Sampling for Particulate Contamination by Tape Lift
- ASTM-E1234 - Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
- ASTM-E1235 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
- ASTM-E1235M - Test Method for Gravimetric Determination of Nonvolatile Residue (Nvr) in Environmentally Controlled Areas for Spacecraft [Metric] (Withdrawn 2000)
- ASTM-E1309 - Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases (Withdrawn 2015)
- ASTM-E1434 - Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases (Withdrawn 2015)
- ASTM-E1471 - Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases (Withdrawn 2015)
- ASTM-E1548 - Standard Practice for Preparation of Aerospace Contamination Control Plans
- ASTM-E1549 - Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
- ASTM-E1559 - Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
- ASTM-E1560 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
- ASTM-E1731 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
- ASTM-E1731M - Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves [Metric] (Withdrawn 2000)
- ASTM-E1922 - Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
- ASTM-E1997 - Standard Practice for the Selection of Spacecraft Materials
- ASTM-E2042 - Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
- ASTM-E2088 - Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
- ASTM-E2089 - Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications
- ASTM-E2090 - Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
- ASTM-E2217 - Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
- ASTM-E2311 - Standard Practice for QCM Measurement of Spacecraft Molecular Contamination in Space
- ASTM-E2312 - Standard Practice for Tests of Cleanroom Materials
- ASTM-E2352 - Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations
- ASTM-E2683 - Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
- ASTM-E2684 - Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
- ASTM-E285 - Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
- ASTM-E2900 - Standard Practice for Spacecraft Hardware Thermal Vacuum Bakeout
- ASTM-E294 - Test Method for Effective Pumping Speed of Vacuum Chamber Systems (Withdrawn 2000)
- ASTM-E295 - Standard Test Method for Measured Speed of Oil Diffusion Pumps
- ASTM-E296 - Standard Practice for Ionization Gage Application to Space Simulators
- ASTM-E3057 - Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
- ASTM-E307 - Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
- ASTM-E341 - Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
- ASTM-E349 - Standard Terminology Relating to Space Simulation
- ASTM-E377 - Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
- ASTM-E408 - Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
- ASTM-E422 - Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
- ASTM-E423 - Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
- ASTM-E434 - Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
- ASTM-E457 - Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
- ASTM-E458 - Standard Test Method for Heat of Ablation
- ASTM-E459 - Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
- ASTM-E471 - Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
- ASTM-E490 - Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
- ASTM-E491 - Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
- ASTM-E511 - Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
- ASTM-E512 - Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
- ASTM-E595 - Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
- ASTM-E598 - Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
- ASTM-E637 - Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
- ASTM-E638 - Test Method for Calibration of Heat Transfer Rate Calorimeters Using a Narrow-Angle Blackbody Radiation Facility (Withdrawn 2001)
- ASTM-E639 - Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
- ASTM-E834 - Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
- ASTM-F1080 - Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
- ASTM-F1104 - Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
- ASTM-F1105 - Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
- ASTM-F1110 - Standard Test Method for Sandwich Corrosion Test
- ASTM-F1111 - Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
- ASTM-F1113 - Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
- ASTM-F1128 - Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using Salt Impingement Method (Withdrawn 1996)
- ASTM-F1164 - Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
- ASTM-F1165 - Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
- ASTM-F1181 - Standard Test Method for Measuring Binocular Disparity in Transparent Parts
- ASTM-F1227 - Test Method for Total Mass Loss of Materials and Condensation of Outgassed Volatiles on Microelectronics-Related Substrates (Withdrawn 2000)
- ASTM-F1252 - Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
- ASTM-F1293 - Test Method for Evaluation of Coated Transparent Plastics Subjected to Cyclic Flexural/Thermal Fatigue (Withdrawn 2000)
- ASTM-F1316 - Standard Test Method for Measuring the Transmissivity of Transparent Parts
- ASTM-F1362 - Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
- ASTM-F1459 - Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
- ASTM-F1624 - Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
- ASTM-F1645 - Standard Test Method for Water Migration in Honeycomb Core Materials
- ASTM-F1863 - Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
- ASTM-F1864 - Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
- ASTM-F2078 - Standard Terminology Relating to Hydrogen Embrittlement Testing
- ASTM-F21 - Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
- ASTM-F2108 - Standard Practice for Inspection of Transparent Parts by Prism
- ASTM-F2109 - Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
- ASTM-F2111 - Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
- ASTM-F2156 - Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
- ASTM-F22 - Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
- ASTM-F24 - Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
- ASTM-F2429 - Standard Terminology Relating to Aerospace Transparent Materials and Enclosures
- ASTM-F2469 - Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
- ASTM-F25 - Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
- ASTM-F302 - Standard Practice for Field Sampling of Aerospace Fluids in Containers
- ASTM-F303 - Standard Practices for Sampling for Particles in Aerospace Fluids and Components
- ASTM-F306 - Practice for Sampling Particulates from Man-Accessible Storage Vessels for Aerospace Fluids by Vacuum Entrainment Technique (General Method) (Withdrawn 2000)
- ASTM-F307 - Standard Practice for Sampling Pressurized Gas for Gas Analysis
- ASTM-F309 - Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
- ASTM-F310 - Standard Practice for Sampling Cryogenic Aerospace Fluids
- ASTM-F311 - Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
- ASTM-F312 - Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
- ASTM-F315 - Test Method of Identification of Solder and Solder Flux Contaminants in Aerospace Fluids (Withdrawn 1998)
- ASTM-F318 - Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
- ASTM-F319 - Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
- ASTM-F320 - Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
- ASTM-F326 - Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
- ASTM-F327 - Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
- ASTM-F330 - Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
- ASTM-F331 - Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
- ASTM-F3440 - Standard Test Method for Corrosion of Low-Embrittling Zinc-Nickel Plate by Aircraft Maintenance Chemicals
- ASTM-F359 - Standard Practice for Static Immersion Testing of Unstressed Materials in Nitrogen Tetroxide (N 2) (Withdrawn 2003)
- ASTM-F371 - Standard Test Method for Compatibility of Materials with Liquid Oxygen (Reaction Intensity Method) (Withdrawn 2003)
- ASTM-F428 - Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
- ASTM-F482 - Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
- ASTM-F483 - Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
- ASTM-F484 - Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
- ASTM-F485 - Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
- ASTM-F50 - Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- ASTM-F502 - Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
- ASTM-F503 - Practice for Preparing Aircraft Cleaning Compounds (Withdrawn 1988)
- ASTM-F51 - Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM-F519 - Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
- ASTM-F520 - Standard Test Method for Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures
- ASTM-F521 - Standard Test Methods for Bond Integrity of Transparent Laminates
- ASTM-F548 - Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
- ASTM-F58 - Test Method of Measuring Specific Resistivity of Electronic Grade Solvents (Withdrawn 1998)
- ASTM-F651 - Method for Particle Single-Point Calibration by the Median Method (Withdrawn 1988)
- ASTM-F687 - Practice for On-Site Calibration of Liquid-Borne Automatic Particle Counters with Adjustable Individual Size Thresholds (Withdrawn 1987)
- ASTM-F71 - Standard Practice for Using the Morphological Key for the Rapid Identification of Fibers for Contamination Control in Electron Devices and Microelectronics (Withdrawn 2005)
- ASTM-F733 - Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
- ASTM-F734 - Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
- ASTM-F735 - Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
- ASTM-F736 - Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
- ASTM-F764 - Standard Practice for Compatibility of Materials with High-Energy Propellants (Impact Sensitivity Threshold Technique) (Withdrawn 2003)
- ASTM-F790 - Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
- ASTM-F791 - Standard Test Method for Stress Crazing of Transparent Plastics
- ASTM-F801 - Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
- ASTM-F862 - Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
- ASTM-F91 - Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
- ASTM-F942 - Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
- ASTM-F943 - Test Method for Measuring Halation of Transparent Parts (Withdrawn 1997)
- ASTM-F945 - Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials