11.04: Waste Management
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-D1345 - Method of Test for Evaluating Acute Toxicity of Water to Fresh-Water Fishes (Withdrawn 1984)
- ASTM-D1973 - Standard Guide for Design of a Liner System for Containment of Wastes (Withdrawn 2000)
- ASTM-D3987 - Standard Practice for Shake Extraction of Solid Waste with Water
- ASTM-D4447 - Standard Guide for Disposal of Laboratory Chemicals and Samples
- ASTM-D4448 - Standard Guide for Sampling Ground-Water Monitoring Wells
- ASTM-D4503 - Standard Practice for Dissolution of Solid Waste by Lithium Metaborate Fusion (Withdrawn 2012)
- ASTM-D4547 - Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
- ASTM-D4646 - Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
- ASTM-D4687 - Standard Guide for General Planning of Waste Sampling
- ASTM-D4793 - Standard Test Method for Sequential Batch Extraction of Waste with Water
- ASTM-D4842 - Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
- ASTM-D4843 - Standard Test Method for Wetting and Drying Test of Solid Wastes
- ASTM-D4844 - Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
- ASTM-D4874 - Standard Test Method for Leaching Solid Material in a Column Apparatus (Withdrawn 2021)
- ASTM-D4978 - Standard Test Methods for Screening of Reactive Sulfides in Waste
- ASTM-D4979 - Standard Practice for Physical Description Screening Analysis in Waste
- ASTM-D4980 - Standard Test Methods for Screening of pH in Waste (Withdrawn 2009)
- ASTM-D4981 - Standard Practice for Screening of Oxidizers in Waste
- ASTM-D4982 - Standard Test Methods for Flammability Potential Screening Analysis of Waste
- ASTM-D5013 - Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
- ASTM-D5049 - Standard Test Method for the Screening of Cyanides in Waste (Withdrawn 1999)
- ASTM-D5050 - Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
- ASTM-D5057 - Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
- ASTM-D5058 - Standard Practices for Compatibility of Screening Analysis of Waste
- ASTM-D5115 - Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF (Withdrawn 2004)
- ASTM-D5120 - Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process (Withdrawn 2014)
- ASTM-D5177 - Standard Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005)
- ASTM-D5198 - Standard Practice for Nitric Acid Digestion of Solid Waste
- ASTM-D5231 - Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
- ASTM-D5232 - Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
- ASTM-D5233 - Standard Test Method for Single Batch Extraction Method for Wastes
- ASTM-D5283 - Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
- ASTM-D5284 - Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid
- ASTM-D5285 - Standard Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments (Withdrawn 2008)
- ASTM-D5358 - Standard Practice for Sampling With a Dipper or Pond Sampler
- ASTM-D5359 - Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber
- ASTM-D5368 - Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples (Withdrawn 2014)
- ASTM-D5369 - Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction (Withdrawn 2016)
- ASTM-D5370 - Standard Specification for Pozzolanic Blended Materials in Construction Applications (Withdrawn 2020)
- ASTM-D5451 - Standard Practice for Sampling Using a Trier Sampler
- ASTM-D5468 - Standard Test Method for Gross Calorific and Ash Value of Waste Materials (Withdrawn 2016)
- ASTM-D5495 - Standard Practice for Sampling with a Composite Liquid Waste Sampler (COLIWASA)
- ASTM-D5513 - Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis
- ASTM-D5530 - Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
- ASTM-D5633 - Standard Practice for Sampling with a Scoop
- ASTM-D5658 - Standard Practice for Sampling Unconsolidated Waste from Trucks
- ASTM-D5659 - Standard Test Method for Chlorophenoxy Acid Herbicides in Waste Using HPLC (Withdrawn 2019)
- ASTM-D5660 - Standard Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium (Withdrawn 2014)
- ASTM-D5679 - Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
- ASTM-D5680 - Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
- ASTM-D5681 - Standard Terminology for Waste and Waste Management
- ASTM-D5743 - Standard Practice for Sampling Single or Multilayered Liquids, with or Without Solids, in Drums or Similar Containers
- ASTM-D5744 - Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
- ASTM-D5745 - Standard Guide for Developing and Implementing Interim and Early Actions for Waste Contamination Site Remediation
- ASTM-D5746 - Standard Classification of Environmental Condition of Property Area Types, Including Explosives Safety for Federally-Owned Real Property
- ASTM-D5759 - Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
- ASTM-D5792 - Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
- ASTM-D5829 - Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories (Withdrawn 2015)
- ASTM-D5830 - Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
- ASTM-D5831 - Standard Practice for Screening Fuels in Soils
- ASTM-D5839 - Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
- ASTM-D5928 - Standard Practice for Screening of Waste for Radioactivity
- ASTM-D5929 - Standard Test Method for Determining Biodegradability of Materials Exposed to Source-Separated Organic Municipal Solid Waste Mesophilic Composting Conditions by Respirometry
- ASTM-D5956 - Standard Guide for Sampling Strategies for Heterogeneous Wastes
- ASTM-D5975 - Standard Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption
- ASTM-D6009 - Standard Guide for Sampling Waste Piles
- ASTM-D6010 - Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices (Withdrawn 2016)
- ASTM-D6044 - Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
- ASTM-D6050 - Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
- ASTM-D6051 - Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
- ASTM-D6052 - Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
- ASTM-D6063 - Standard Guide for Sampling of Drums and Similar Containers by Field Personnel
- ASTM-D6232 - Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities
- ASTM-D6233 - Standard Guide for Data Assessment for Environmental Waste Management Activities (Withdrawn 2016)
- ASTM-D6234 - Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
- ASTM-D6250 - Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions (Withdrawn 2018)
- ASTM-D6270 - Standard Practice for Use of Scrap Tires in Civil Engineering Applications
- ASTM-D6311 - Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
- ASTM-D6323 - Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
- ASTM-D6346 - Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs
- ASTM-D6418 - Standard Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis (Withdrawn 2018)
- ASTM-D6498 - Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations (Withdrawn 2016)
- ASTM-D6538 - Standard Guide for Sampling Wastewater With Automatic Samplers
- ASTM-D6582 - Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling (Withdrawn 2012)
- ASTM-D6597 - Standard Practice for Assessment of Attaining Clean Up Level for Site Closure (Withdrawn 2016)
- ASTM-D6640 - Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
- ASTM-D6661 - Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
- ASTM-D6699 - Standard Practice for Sampling Liquids Using Bailers
- ASTM-D6700 - Standard Guide for Use of Scrap Tires as Tire-Derived Fuel
- ASTM-D6759 - Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
- ASTM-D6842 - Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making (Withdrawn 2015)
- ASTM-D6907 - Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers
- ASTM-D6956 - Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
- ASTM-D6982 - Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns
- ASTM-D7203 - Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor (Withdrawn 2022)
- ASTM-D7204 - Standard Practice for Sampling Waste Streams on Conveyors
- ASTM-D7294 - Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated With Chemicals of Interest
- ASTM-D7353 - Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
- ASTM-D7831 - Standard Practice for Sampling of Tanks by Field Personnel
- ASTM-D7858 - Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
- ASTM-D7968 - Standard Test Method for Determination of Polyfluorinated Compounds in Soil by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
- ASTM-D8018 - Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
- ASTM-D8064 - Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams (Withdrawn 2024)
- ASTM-D8155 - Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water
- ASTM-D8174 - Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
- ASTM-D8175 - Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
- ASTM-D8187 - Standard Guide for Interpretation of Standard Humidity Cell Test Results
- ASTM-D8310 - Standard Test Method for Analysis of Target Phenols (TPs) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
- ASTM-D8535 - Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Soil/Biosolid Matrices by Solvent Extraction, Filtering, and Followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
- ASTM-D8571 - Standard Practice for Detection of Hydrocarbon Liquids in Soils by Fluorescence with an Optical Imaging Profiler Using Direct Push Methods
- ASTM-E1037 - Standard Test Method for Measuring Particle Size Distribution of RDF-5
- ASTM-E1076 - Standard Practice for Maintaining Health and Safety Records at Solid Waste Processing Facilities (Withdrawn 2010)
- ASTM-E1107 - Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations
- ASTM-E1108 - Standard Test Method for Determination of the Recovery of a Product in a
Materials Separation Device - ASTM-E1109 - Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
- ASTM-E1134 - Standard Specification for Source-Separated Steel Cans (Withdrawn 2001)
- ASTM-E1183 - Standard Test Method for Air Drying RDF-5 for Further Analysis (Withdrawn 2009)
- ASTM-E1248 - Standard Practice for Shredder Explosion Protection
- ASTM-E1266 - Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
- ASTM-E1527 - Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
- ASTM-E1599 - Standard Guide for Corrective Action for Petroleum Releases (Withdrawn 2002)
- ASTM-E1609 - Standard Guide for Development and Implementation of a Pollution Prevention Program (Withdrawn 2010)
- ASTM-E1739 - Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites (Withdrawn 2024)
- ASTM-E1912 - Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases (Withdrawn 2013)
- ASTM-E1943 - Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites (Withdrawn 2024)
- ASTM-E1984 - Standard Guide for Process of Sustainable Brownfields Redevelopment (Withdrawn 2012)
- ASTM-E2018 - Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process
- ASTM-E2091 - Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls
- ASTM-E2201 - Standard Terminology for Coal Combustion Products
- ASTM-E2787 - Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
- ASTM-E2838 - Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
- ASTM-E2866 - Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid, and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
- ASTM-E688 - Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019)
- ASTM-E701 - Standard Test Methods for Municipal Ferrous Scrap
- ASTM-E702 - Standard Specification for Municipal Ferrous Scrap
- ASTM-E708 - Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
- ASTM-E711 - Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter (Withdrawn 2004)
- ASTM-E775 - Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
- ASTM-E776 - Standard Test Method for Determination of Forms of Chlorine in Refuse-Derived Fuel
- ASTM-E777 - Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
- ASTM-E778 - Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples
- ASTM-E790 - Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples
- ASTM-E791 - Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
- ASTM-E828 - Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis (Withdrawn 2009)
- ASTM-E829 - Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
- ASTM-E830 - Standard Test Method for Ash in the Analysis Sample of Refuse-Derived Fuel
- ASTM-E850 - Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill (Withdrawn 2019)
- ASTM-E856 - Standard Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel (Withdrawn 2004)
- ASTM-E868 - Standard Test Methods for Conducting Performance Tests on Mechanical Conveying Equipment Used in Resource Recovery Systems (Withdrawn 2005)
- ASTM-E884 - Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities (Withdrawn 2021)
- ASTM-E885 - Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy (Withdrawn 2009)
- ASTM-E886 - Standard Practices for Dissolution of Refuse-Derived Fuel (RDF) Ash Samples for Analyses of Metals (Withdrawn 2002)
- ASTM-E887 - Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash
- ASTM-E889 - Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
- ASTM-E897 - Standard Test Method for Volatile Matter in the Analysis Sample of Refuse-Derived Fuel (Withdrawn 2004)
- ASTM-E926 - Standard Practices for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals (Withdrawn 2002)
- ASTM-E929 - Standard Test Method for Measuring Electrical Energy Requirements of Processing Equipment (Withdrawn 2014)
- ASTM-E949 - Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample (Withdrawn 2004)
- ASTM-E953 - Standard Practice for Fusibility of Refuse-Derived Fuel (RDF) Ash
- ASTM-E954 - Standard Practice for Packaging and Shipping of Laboratory Samples of Refuse-Derived Fuel (Withdrawn 2002)
- ASTM-E955 - Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples (Withdrawn 2017)
- ASTM-E956 - Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
- ASTM-E959 - Standard Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment
- ASTM-ES16 - Practice for Generation of Environmental Data Related to Waste Management Activities (Withdrawn 1992)
- ASTM-F1008 - Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Salt Marshes (Withdrawn 2001)
- ASTM-F1011 - Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel
- ASTM-F1084 - Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
- ASTM-F1127 - Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel
- ASTM-F1481 - Standard Guide for Ecological Considerations for the Use of Bioremediation in Oil Spill Response-Sand and Gravel Beaches (Withdrawn 2010)
- ASTM-F1522 - Standard Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills (Withdrawn 2007)
- ASTM-F1523 - Standard Guide for Selection of Booms in Accordance With Water Body Classifications
- ASTM-F1524 - Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills
- ASTM-F1525 - Standard Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills (Withdrawn 2015)
- ASTM-F1599 - Standard Guide for Collecting Performance Data on Temporary Storage Devices
- ASTM-F1600 - Standard Terminology Relating to Bioremediation (Withdrawn 2014)
- ASTM-F1607 - Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps
- ASTM-F1644 - Standard Guide for Health and Safety Training of Oil Spill Responders (Withdrawn 2010)
- ASTM-F1656 - Standard Guide for Health and Safety Training of Oil Spill Responders in the United States (Withdrawn 2010)
- ASTM-F1657 - Standard Practice for Emergency Joining of Booms with Incompatible Connectors
- ASTM-F1686 - Standard Guide for Surveys to Document and Assess Oiling Conditions
- ASTM-F1687 - Standard Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines and Other Terrain
- ASTM-F1688 - Guide for Estimating Oil Spill Recovery System Effectiveness (Withdrawn 1999)
- ASTM-F1780 - Standard Guide for Estimating Oil Spill Recovery System Effectiveness
- ASTM-F1788 - Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
- ASTM-F1834 - Standard Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant Mitigation Method on Land (Withdrawn 2010)
- ASTM-F1872 - Standard Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Considerations
- ASTM-F715 - Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
- ASTM-F716 - Standard Test Methods for Sorbent Performance of Absorbents for Use on Chemical and Light Hydrocarbon Spills
- ASTM-F808 - Guide for Collecting Skimmer Performance Data in Uncontrolled Environments (Withdrawn 1998)
- ASTM-F818 - Standard Terminology Relating to Spill Response Booms and Barriers
- ASTM-F873 - Standard Guide for Incinerating Oil Spill Wastes at Temporary Field Locations (Withdrawn 2010)
- ASTM-F962 - Standard Specification for Oil Spill Response Boom Connection: Z-Connector
- ASTM-F989 - Methods of Testing Spill Control Barrier Tension Members (Withdrawn 1995)