ASTM-D5759 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

ASTM-D5759 - 2012 R20 EDITION - CURRENT
Show Complete Document History

Document Center Inc. is an authorized dealer of ASTM standards.
The following bibliographic material is provided to assist you with your purchasing decision:

Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
ORDER

Price:

$61.00        


Want this as a site license?

Scope

1.1 This guide recommends standards for the characterization of fly ash from the combustion of coal, fly ash from coal combusted in the presence of alkaline materials, and fly ash from combusted coal in which the flue gases have been treated with alkaline materials in the presence of the fly ash.

1.2 This guide provides recommended and optional test methods for fly ash evaluation. Acceptance criteria can be negotiated between the producer and the user according to the potential end use.

1.3 The coal fly ash and clean coal combustion fly ash of this guide do not include the following:

1.3.1 Dusts from kilns producing products such as lime, portland cement, activated clays, etc.;

1.3.2 By-products of flue gas desulflurization that are not collected with the primary fly ash removal equipment such as the baghouse or electrostatic precipitator; and

1.3.3 Fly ash or other combustion products derived from the burning of waste; municipal, industrial, or commercial garbage; sewage sludge or other refuse, or both; derived fuels; wood; wood waste products; rice hulls; agriculture waste; or other non-coal fuels or other such fuels blended with coal, or some combination thereof.

1.4 Fly ash may contain some trace elements that may affect performance or potential end use.

1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords

Coal Fly Ash; Fly Ash for Potential Uses; ICS Number Code 75.080 (Petroleum products in general)

To find similar documents by ASTM Volume:

11.04 (Waste Management)

To find similar documents by classification:

75.080 (Petroleum products in general)

This document comes with our free Notification Service, good for the life of the document.

This document is available in either Paper or PDF format.

Document Number

ASTM-D5759-12R20

Revision Level

2012 R20 EDITION

Status

Current

Modification Type

New

Publication Date

May 8, 2020

Document Type

Guide

Page Count

4 pages

Committee Number

D34.03