04.02: Concrete and Aggregates
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-C1017 - Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete (Withdrawn 2022)
- ASTM-C1018 - Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
- ASTM-C1040 - Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
- ASTM-C1042 - Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear (Withdrawn 2008)
- ASTM-C1059 - Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
- ASTM-C1064 - Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
- ASTM-C1067 - Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials
- ASTM-C1073 - Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali
- ASTM-C1074 - Standard Practice for Estimating Concrete Strength by the Maturity Method
- ASTM-C1077 - Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- ASTM-C1078 - Test Methods for Determining the Cement Content of Freshly Mixed Concrete (Withdrawn 1998)
- ASTM-C1079 - Test Methods for Determining the Water Content of Freshly Mixed Concrete (Withdrawn 1998)
- ASTM-C1084 - Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
- ASTM-C1090 - Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
- ASTM-C1102 - Standard Test Method for Time of Setting of Portland-Cement Pastes Containing Quick-Setting Accelerating Admixtures for Shotcrete by the Use of Gillmore Needles (Withdrawn 2002)
- ASTM-C1105 - Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
- ASTM-C1107 - Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
- ASTM-C1116 - Standard Specification for Fiber-Reinforced Concrete
- ASTM-C1117 - Standard Test Method for Time of Setting of Shotcrete Mixtures by Penetration Resistance (Withdrawn 2003)
- ASTM-C1137 - Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011)
- ASTM-C1138 - Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
- ASTM-C1138M - Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
- ASTM-C1140 - Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
- ASTM-C1141 - Standard Specification for Admixtures for Shotcrete (Withdrawn 2024)
- ASTM-C1150 - Standard Test Method for the Break-Off Number of Concrete (Withdrawn 2002)
- ASTM-C1151 - Standard Test Method for Evaluating the Effectiveness of Materials for Curing Concrete (Withdrawn 2000)
- ASTM-C1152 - Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
- ASTM-C116 - Test Method for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure (Withdrawn 1999)
- ASTM-C117 - Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
- ASTM-C1170 - Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
- ASTM-C1176 - Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
- ASTM-C1181 - Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
- ASTM-C1202 - Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
- ASTM-C1218 - Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
- ASTM-C123 - Standard Test Method for Lightweight Particles in Aggregate (Withdrawn 2023)
- ASTM-C1231 - Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
- ASTM-C1240 - Standard Specification for Silica Fume Used in Cementitious Mixtures
- ASTM-C1245 - Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test) (Withdrawn 2019)
- ASTM-C125 - Standard Terminology Relating to Concrete and Concrete Aggregates
- ASTM-C1252 - Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
- ASTM-C1260 - Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
- ASTM-C127 - Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024)
- ASTM-C128 - Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
- ASTM-C1293 - Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
- ASTM-C131 - Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
- ASTM-C1315 - Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
- ASTM-C1339 - Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
- ASTM-C136 - Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
- ASTM-C1362 - Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete (Withdrawn 2014)
- ASTM-C138 - Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
- ASTM-C1383 - Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
- ASTM-C1385 - Standard Practice for Sampling Materials for Shotcrete
- ASTM-C1398 - Standard Test Method for The Laboratory Determination of the Time of Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles (Withdrawn 2010)
- ASTM-C1399 - Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete (Withdrawn 2024)
- ASTM-C1404 - Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension (Withdrawn 2010)
- ASTM-C142 - Standard Test Method for Clay Lumps and Friable Particles in Aggregates
- ASTM-C143 - Standard Test Method for Slump of Hydraulic-Cement Concrete
- ASTM-C1435 - Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
- ASTM-C1436 - Standard Specification for Materials for Shotcrete (Withdrawn 2022)
- ASTM-C1438 - Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
- ASTM-C1439 - Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
- ASTM-C1451 - Standard Practice for Determining Variability of Concrete-Making Materials From a Single Source
- ASTM-C1480 - Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application (Withdrawn 2021)
- ASTM-C1524 - Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
- ASTM-C1542 - Standard Test Method for Measuring Length of Concrete Cores
- ASTM-C1543 - Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding (Withdrawn 2019)
- ASTM-C1550 - Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM-C1556 - Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
- ASTM-C156 - Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
- ASTM-C1567 - Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
- ASTM-C157 - Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
- ASTM-C1579 - Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
- ASTM-C1580 - Standard Test Method for Water-Soluble Sulfate in Soil
- ASTM-C1581 - Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
- ASTM-C1582 - Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
- ASTM-C1583 - Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
- ASTM-C1585 - Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
- ASTM-C1602 - Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
- ASTM-C1603 - Standard Test Method for Measurement of Solids in Water
- ASTM-C1604 - Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
- ASTM-C1609 - Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
- ASTM-C1610 - Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
- ASTM-C1611 - Standard Test Method for Slump Flow of Self-Consolidating Concrete
- ASTM-C1621 - Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
- ASTM-C1622 - Standard Specification for Cold-Weather Admixture Systems
- ASTM-C1646 - Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
- ASTM-C1679 - Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
- ASTM-C1688 - Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete (Withdrawn 2023)
- ASTM-C1697 - Standard Specification for Blended Supplementary Cementitious Materials
- ASTM-C1698 - Standard Test Method for Autogenous Strain of Cement Paste and Mortar
- ASTM-C1701 - Standard Test Method for Infiltration Rate of In Place Pervious Concrete
- ASTM-C1708 - Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
- ASTM-C1709 - Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
- ASTM-C171 - Standard Specification for Sheet Materials for Curing Concrete
- ASTM-C1712 - Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
- ASTM-C172 - Standard Practice for Sampling Freshly Mixed Concrete
- ASTM-C1723 - Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
- ASTM-C173 - Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
- ASTM-C174 - Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
- ASTM-C1740 - Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
- ASTM-C1741 - Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout
- ASTM-C1747 - Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion (Withdrawn 2022)
- ASTM-C1753 - Standard Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements
- ASTM-C1754 - Standard Test Method for Density and Void Content of Hardened Pervious Concrete (Withdrawn 2021)
- ASTM-C1757 - Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete (Withdrawn 2022)
- ASTM-C1758 - Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
- ASTM-C1760 - Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete (Withdrawn 2021)
- ASTM-C1761 - Standard Specification for Lightweight Aggregate for Internal Curing of Concrete
- ASTM-C1768 - Standard Practice for Accelerated Curing of Concrete Cylinders
- ASTM-C1777 - Standard Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter
- ASTM-C1778 - Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
- ASTM-C1792 - Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023)
- ASTM-C1797 - Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
- ASTM-C1797M - Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
- ASTM-C1798 - Standard Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete
- ASTM-C1800 - Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
- ASTM-C1803 - Standard Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser
- ASTM-C1810 - Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
- ASTM-C1812 - Standard Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests
- ASTM-C1827 - Standard Test Method for Determination of the Air-Entraining Admixture Demand of a Cementitious Mixture
- ASTM-C1849 - Standard Test Method for Density and Air Content (Pressure Method) of Freshly Mixed Roller-Compacted Concrete
- ASTM-C1856 - Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
- ASTM-C1876 - Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
- ASTM-C1890 - Standard Test Method for K-slump of Freshly Mixed Concrete
- ASTM-C1897 - Standard Test Methods for Measuring the Reactivity of Supplementary Cementitious Materials by Isothermal Calorimetry and Bound Water Measurements
- ASTM-C192 - Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
- ASTM-C215 - Standard Test Method for Fundamental Transverse, Longitudinal, and
Torsional Resonant Frequencies of Concrete Specimens - ASTM-C227 - Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method) (Withdrawn 2018)
- ASTM-C231 - Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM-C232 - Standard Test Method for Bleeding of Concrete
- ASTM-C233 - Standard Test Method for Air-Entraining Admixtures for Concrete
- ASTM-C234 - Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel (Withdrawn 2000)
- ASTM-C260 - Standard Specification for Air-Entraining Admixtures for Concrete
- ASTM-C289 - Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method) (Withdrawn 2016)
- ASTM-C29 - Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
- ASTM-C293 - Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
- ASTM-C294 - Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
- ASTM-C295 - Standard Guide for Petrographic Examination of Aggregates for Concrete
- ASTM-C309 - Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
- ASTM-C31 - Standard Practice for Making and Curing Concrete Test Specimens in the Field
- ASTM-C311 - Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
- ASTM-C33 - Standard Specification for Concrete Aggregates
- ASTM-C330 - Standard Specification for Lightweight Aggregates for Structural Concrete
- ASTM-C331 - Standard Specification for Lightweight Aggregates for Concrete Masonry Units
- ASTM-C332 - Standard Specification for Lightweight Aggregates for Insulating Concrete
- ASTM-C341 - Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements
- ASTM-C342 - Standard Test Method for Potential Volume Change of Cement-Aggregate Combinations (Withdrawn 2001)
- ASTM-C360 - Test Method for Ball Penetration in Freshly Mixed Hydraulic Cement Concrete (Withdrawn 1999)
- ASTM-C387 - Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
- ASTM-C39 - Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM-C40 - Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
- ASTM-C403 - Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
- ASTM-C418 - Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
- ASTM-C42 - Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- ASTM-C441 - Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
- ASTM-C457 - Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
- ASTM-C469 - Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
- ASTM-C470 - Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
- ASTM-C490 - Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
- ASTM-C494 - Standard Specification for Chemical Admixtures for Concrete
- ASTM-C495 - Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
- ASTM-C496 - Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
- ASTM-C511 - Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
- ASTM-C512 - Standard Test Method for Creep of Concrete in Compression
- ASTM-C513 - Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
- ASTM-C535 - Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
- ASTM-C566 - Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
- ASTM-C567 - Standard Test Method for Determining Density of Structural Lightweight Concrete
- ASTM-C586 - Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
- ASTM-C597 - Standard Test Method for Pulse Velocity Through Concrete
- ASTM-C617 - Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM-C618 - Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
- ASTM-C637 - Standard Specification for Aggregates for Radiation-Shielding Concrete
- ASTM-C638 - Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete
- ASTM-C641 - Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
- ASTM-C642 - Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
- ASTM-C666 - Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (Withdrawn 2024)
- ASTM-C670 - Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
- ASTM-C671 - Standard Test Method for Critical Dilation of Concrete Specimens Subjected to Freezing (Withdrawn 2003)
- ASTM-C672 - Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (Withdrawn 2021)
- ASTM-C682 - Standard Practice for Evaluation of Frost Resistance of Coarse Aggregates in Air-Entrained Concrete by Critical Dilation Procedures (Withdrawn 2003)
- ASTM-C683 - Method of Test for Compressive and Flexural Stength of Concrete Under Field Conditions (Withdrawn 1982)
- ASTM-C684 - Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens (Withdrawn 2012)
- ASTM-C685 - Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
- ASTM-C70 - Standard Test Method for Surface Moisture in Fine Aggregate
- ASTM-C702 - Standard Practice for Reducing Samples of Aggregate to Testing Size
- ASTM-C779 - Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
- ASTM-C78 - Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM-C796 - Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
- ASTM-C801 - Standard Test Method for Determining the Mechanical Properties of Hardened Concrete Under Triaxial Loads (Withdrawn 2004)
- ASTM-C802 - Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
- ASTM-C803 - Standard Test Method for Penetration Resistance of Hardened Concrete
- ASTM-C805 - Standard Test Method for Rebound Number of Hardened Concrete
- ASTM-C823 - Standard Practice for Examination and Sampling of Hardened
Concrete in Constructions - ASTM-C827 - Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
- ASTM-C85 - Test Method for Cement Content of Hardened Portland Cement Concrete (Withdrawn 1988)
- ASTM-C851 - Recommended Practice for Estimating Scratch Hardness of Coarse Aggregate Particles (Withdrawn 1984)
- ASTM-C856 - Standard Practice for Petrographic Examination of Hardened Concrete
- ASTM-C869 - Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
- ASTM-C87 - Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
- ASTM-C873 - Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
- ASTM-C876 - Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
- ASTM-C878 - Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
- ASTM-C88 - Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
- ASTM-C881 - Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
- ASTM-C882 - Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
- ASTM-C884 - Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
- ASTM-C900 - Standard Test Method for Pullout Strength of Hardened Concrete
- ASTM-C918 - Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
- ASTM-C928 - Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
- ASTM-C937 - Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
- ASTM-C938 - Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
- ASTM-C939 - Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
- ASTM-C94 - Standard Specification for Ready-Mixed Concrete
- ASTM-C940 - Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
- ASTM-C941 - Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
- ASTM-C942 - Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
- ASTM-C943 - Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
- ASTM-C944 - Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
- ASTM-C953 - Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
- ASTM-C979 - Standard Specification for Pigments for Integrally Colored Concrete
- ASTM-C989 - Standard Specification for Slag Cement for Use in Concrete and Mortars
- ASTM-C995 - Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone (Withdrawn 2008)
- ASTM-D5370 - Standard Specification for Pozzolanic Blended Materials in Construction Applications (Withdrawn 2020)
- ASTM-E329 - Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection