ASTM-D3507 › Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood (Withdrawn 2008)
The following bibliographic material is provided to assist you with your purchasing decision:
Scope
1.1 These test methods cover procedures for determining penetration of preservatives in wood in cases where demarcation between the treated and untreated wood is not readily visible. Included are test methods for differentiating the heartwood and the sapwood of wood samples for specific species, and a test method for differentiating the heartwoods between the red oaks and the white oaks.
1.2 The procedures appear in the following order:
Procedure Sections Penetration of Arsenic-Containing Preservatives 6 to 8 Penetration of Copper-Containing Preservatives 9 to 11 Penetration of Fluoride-Containing Preservatives 12 to 15 Penetration of Pentachlorophenol Using 4,4[prime]-bis-Dimethylamino-Triphenylmethane (DMTM) 16 to 20 Penetration of Pentachlorophenol Using a Silver-Copper Complex Known as "Penta-Check" 21 to 24 Penetration of Solvent Used With Oil-Soluble Preservatives 25 to 28 Penetration of Zinc-Containing Preservatives 29 to 32 Differentiating between Sapwood and Heartwood in Pine Species (Pinus sp.) 33 to 36 Differentiating between Sapwood and Heartwood in Douglas Fir (Pseudotsuga menziesii) 37 to 40 Differentiating between Sapwood and Heartwood in White Fir (Abies concolor) 41 to 44 Differentiating Between Woods of the Red Oak and the White Oak Species 45 to 481.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Significance and Use
Preservatives of the metallic series and oil soluble preservatives are not readily apparent in a cross section of wood either due to similar color to the species of wood or lack of color of the preservative itself. Chemical staining of a treated specimen of wood reveals the presence of the preservative.
The sapwood and heartwood of Douglas-Fir and the pine species can be differentiated by a chemical stain.
Keywords
heartwood; penetration; preservatives; sapwood; test; ICS Number Code 71.100.50 (Wood-protecting chemicals)
To find similar documents by ASTM Volume:
To find similar documents by classification:
71.100.50 (Wood-protecting chemicals)
This document comes with our free Notification Service, good for the life of the document.
This document is available in Paper format.
Document Number
ASTM-D3507-97
Revision Level
1997 EDITION
Status
Superseded
Modification Type
Withdrawn
Publication Date
March 10, 1997
Document Type
Test Method
Page Count
6 pages
Committee Number
D07.06