04.10: Wood
ASTM International (formerly the American Society for Testing and Materials) has published a complete collection of their standards for some time. This collection is divided into Sections and Volumes by subject classification for increased useability.
Return to Section Index
The following documents are a part of this series:
- ASTM-D1034 - Standard Specification for Fluor-Chrome-Arsenate-Phenol (Withdrawn 2000)
- ASTM-D1035 - Standard Test Methods for Chemical Analysis of Fluor-Chrome-Arsenate-Phenol (Withdrawn 2000)
- ASTM-D1036 - Standard Test Methods of Static Tests of Wood Poles
- ASTM-D1037 - Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- ASTM-D1038 - Standard Terminology Relating to Veneer, Plywood, and Wood Structural Panels
- ASTM-D1102 - Standard Test Method for Ash in Wood
- ASTM-D1105 - Standard Test Method for Preparation of Extractive-Free Wood
- ASTM-D1106 - Standard Test Method for Acid-Insoluble Lignin in Wood,
- ASTM-D1107 - Standard Test Method for Ethanol-Toluene Solubility of Wood,
- ASTM-D1108 - Standard Test Method for Dichloromethane Solubles in Wood,
- ASTM-D1109 - Standard Test Method for 1 % Sodium Hydroxide Solubility of Wood
- ASTM-D1110 - Standard Test Methods for Water Solubility of Wood
- ASTM-D1165 - Standard Nomenclature of Commercial Hardwoods and Softwoods
- ASTM-D1166 - Standard Test Method for Methoxyl Groups in Wood and Related Materials
- ASTM-D1272 - Standard Specification for Pentachlorophenol (Withdrawn 2006)
- ASTM-D1274 - Standard Test Methods for Chemical Analysis of Pentachlorophenol (Withdrawn 2006)
- ASTM-D1324 - Standard Specification for Modified Wood (Withdrawn 2000) No Replacement
- ASTM-D1325 - Standard Specification for Ammoniacal Copper Arsenate and Ammoniacal Copper Zinc Arsenate (Withdrawn 2006)
- ASTM-D1326 - Standard Test Methods for Chemical Analysis of Ammoniacal Copper Arsenate and Ammoniacal Copper Zinc Arsenate (Withdrawn 2006)
- ASTM-D1413 - Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures (Withdrawn 2016)
- ASTM-D143 - Standard Test Methods for Small Clear Specimens of Timber
- ASTM-D1554 - Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials
- ASTM-D1624 - Standard Specification for Acid Copper Chromate (Withdrawn 2006)
- ASTM-D1625 - Standard Specification for Chromated Copper Arsenate (Withdrawn 2006)
- ASTM-D1627 - Standard Test Methods for Chemical Analysis of Acid Copper Chromate (Withdrawn 2006)
- ASTM-D1628 - Standard Test Methods for Chemical Analysis of Chromated Copper Arsenate (Withdrawn 2006)
- ASTM-D1666 - Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Panel Materials
- ASTM-D168 - Standard Test Method for Coke Residue of Creosote (Withdrawn 2006)
- ASTM-D1758 - Standard Test Method of Evaluating Wood Preservatives by Field Tests with Stakes (Withdrawn 2015)
- ASTM-D1760 - Standard Specification for Pressure Treatment of Timber Products (Withdrawn 2006)
- ASTM-D1761 - Standard Test Methods for Mechanical Fasteners in Wood and Wood-Based Materials
- ASTM-D1762 - Standard Test Method for Chemical Analysis of Wood Charcoal
- ASTM-D1858 - Standard Specification for Creosote-Petroleum Solution (Withdrawn 2006)
- ASTM-D1859 - Standard Specification for Petroleum Used for Blending with Creosote (Withdrawn 2006)
- ASTM-D1860 - Standard Test Method for Moisture and Creosote-Type Preservative in Wood (Withdrawn 2006)
- ASTM-D198 - Standard Test Methods of Static Tests of Lumber in Structural Sizes
- ASTM-D1990 - Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
- ASTM-D2017 - Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods (Withdrawn 2014)
- ASTM-D2085 - Standard Test Method for Determining Chloride Used in Calculating Pentachlorophenol in Solutions or Wood (Lime Ignition Method) (Withdrawn 2006)
- ASTM-D2164 - Standard Methods of Testing Structural Insulating Roof Deck
- ASTM-D2278 - Standard Test Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens (Withdrawn 2015)
- ASTM-D2394 - Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring
- ASTM-D2395 - Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
- ASTM-D245 - Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
- ASTM-D246 - Standard Test Method for Distillation of Creosote and Creosote-Coal Tar Solutions (Withdrawn 2006)
- ASTM-D2481 - Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens (Withdrawn 2014) FYI: No Replacement
- ASTM-D25 - Standard Specification for Round Timber Piles
- ASTM-D2555 - Standard Practice for Establishing Clear Wood Strength Values
- ASTM-D2604 - Standard Specification for High-Boiling Hydrocarbon Solvent for Preparing Oil-Borne Preservative Solutions (Withdrawn 2006)
- ASTM-D2606 - Standard Test Method for Solubility of Pentachlorophenol in Heavy Hydrocarbon Solvents (Withdrawn 2006)
- ASTM-D2718 - Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
- ASTM-D2719 - Standard Test Methods for Wood Structural Panels in Shear Through-the-Thickness
- ASTM-D2898 - Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
- ASTM-D2899 - Standard Practice for Establishing Allowable Stresses for Round Timber Piles
- ASTM-D2915 - Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
- ASTM-D3043 - Standard Test Methods for Structural Panels in Flexure
- ASTM-D3044 - Standard Test Method for Shear Modulus of Wood-Based Structural Panels
- ASTM-D3200 - Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles
- ASTM-D3201 - Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
- ASTM-D3224 - Standard Test Method for Water Solubility of Auxiliary Solvent for Wood Preserving Solutions (Withdrawn 2006)
- ASTM-D3225 - Standard Specification for Low-Boiling Hydrocarbon Solvent for Oil-Borne Preservatives (Withdrawn 2006)
- ASTM-D3345 - Standard Test Method for Laboratory Evaluation of Wood for Resistance to Subterranean Termites
- ASTM-D347 - Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and Coal Tar (Withdrawn 2006)
- ASTM-D3499 - Standard Test Method for Toughness of Wood Structural Panels
- ASTM-D3500 - Standard Test Methods for Wood Structural Panels in Tension
- ASTM-D3501 - Standard Test Methods for Wood-Based Structural Panels in Compression
- ASTM-D3507 - Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood (Withdrawn 2008)
- ASTM-D367 - Standard Test Method for Xylene-Insoluble Matter in Creosote (Withdrawn 2006)
- ASTM-D368 - Standard Test Method for Specific Gravity of Creosote and Oil-Type Preservatives (Withdrawn 2006)
- ASTM-D369 - Standard Test Method for Specific Gravity of Creosote Fractions and Residue (Withdrawn 2006)
- ASTM-D370 - Standard Practice for Dehydration of Oil-Type Preservatives (Withdrawn 2006)
- ASTM-D3737 - Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
- ASTM-D38 - Standard Test Methods for Sampling Wood Preservatives Prior to Testing (Withdrawn 2006)
- ASTM-D3873 - Standard Test Method for Valency State of the Arsenic Component of Ammoniacal Copper Arsenate Solutions (Withdrawn 2006)
- ASTM-D390 - Standard Specification for Coal-Tar Creosote for the Preservative Treatment of Piles, Poles, and Timbers for Marine, Land, and Freshwater Use (Withdrawn 2006)
- ASTM-D391 - Standard Specification for Creosote-Coal Tar Solution (Withdrawn 2006)
- ASTM-D3957 - Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
- ASTM-D4064 - Standard Practice for Preservative Treatment of Utility Poles by the Thermal Process (Withdrawn 2007)
- ASTM-D4278 - Standard Practice for Wet Ashing Procedure for Preparing Wood Samples for Inorganic Chemical Analysis (Withdrawn 2006)
- ASTM-D4442 - Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
- ASTM-D4444 - Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
- ASTM-D4445 - Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
- ASTM-D4446 - Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments (Withdrawn 2022)
- ASTM-D453 - Standard Test Method for Tar Acids in Creosote-Coal Tar Solutions (Withdrawn 2006)
- ASTM-D4761 - Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
- ASTM-D4933 - Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials
- ASTM-D5055 - Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
- ASTM-D5124 - Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation
- ASTM-D5456 - Standard Specification for Evaluation of Structural Composite Lumber Products
- ASTM-D5457 - Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
- ASTM-D5516 - Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
- ASTM-D5536 - Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties
- ASTM-D5582 - Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator
- ASTM-D5583 - Standard Test Method for Detection and Estimation of Retention of Wood Preservatives by Aspergillus Bioassaying (Withdrawn 2010)
- ASTM-D5584 - Standard Test Methods for Chemical Analysis of Ammoniacal Copper Quat, Type B (ACQ-B) (Withdrawn 2006)
- ASTM-D5651 - Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
- ASTM-D5652 - Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products
- ASTM-D5653 - Standard Specification for Copper Dimethyldithiocarbamate (Withdrawn 2006)
- ASTM-D5654 - Standard Specification for Ammoniacal Copper Quat Type B (ACQ-B)1 (Withdrawn 2006)
- ASTM-D5655 - Standard Test Method for Analysis of Copper Dimethyldithiocarbamate (CDDC) Treated Wood by Colorimetry 1 (Withdrawn 2006)
- ASTM-D5664 - Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
- ASTM-D5764 - Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
- ASTM-D5933 - Standard Specification for 2
5 8 - ASTM-D6007 - Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
- ASTM-D6305 - Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
- ASTM-D6513 - Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
- ASTM-D6555 - Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies
- ASTM-D6570 - Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
- ASTM-D6643 - Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
- ASTM-D6782 - Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
- ASTM-D6815 - Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
- ASTM-D6841 - Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
- ASTM-D6874 - Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation
- ASTM-D6958 - Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings
- ASTM-D7031 - Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
- ASTM-D7032 - Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
- ASTM-D7033 - Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
- ASTM-D7147 - Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
- ASTM-D7199 - Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models
- ASTM-D7341 - Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing
- ASTM-D7374 - Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
- ASTM-D7381 - Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material
- ASTM-D7433 - Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels
- ASTM-D7438 - Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
- ASTM-D7469 - Standard Test Methods for End Joints in Structural Wood Products
- ASTM-D7470 - Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs
- ASTM-D7480 - Standard Guide for Evaluating the Attributes of a Forest Management Plan
- ASTM-D7519 - Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting (Withdrawn 2020)
- ASTM-D7612 - Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources
- ASTM-D7672 - Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
- ASTM-D7746 - Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests
- ASTM-D7770 - Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method
- ASTM-D7857 - Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures
- ASTM-D7989 - Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed with Wood Structural Panels
- ASTM-D8023 - Standard Specification for Round Wood Dowels (Pegs) for Use in Wood Construction
- ASTM-D8223 - Standard Practice for Evaluation of Fire-Retardant Treated Laminated Veneer Lumber
- ASTM-D8391 - Standard Specification for Demonstrating Equivalent Fire Performance for Wood-Based Floor Framing Members to Unprotected 2 by 10 Dimension Lumber or Equal-Sized Structural Composite Lumber
- ASTM-D9 - Standard Terminology Relating to Wood and Wood-Based Products
- ASTM-E1333 - Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
- ASTM-E69 - Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
- ASTM-ES20 - Test Method for Calibration of Upright Cylindrical Tanks Using Optical Reference Line Method (Withdrawn 1994)