Document Center List of Standards on Miscellaneous Domestic And Commercial Equipment Including Scissors, Aquarium Equipment, Articles For Domestic Animals, Battery Chargers, Mops, Insect Electrocutors, Lighters, Matches, Paper Clips, Pens, Pencils, Etc.
ICS Code 97.180
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-F2201 - Standard Consumer Safety Specification for Utility Lighters
- ASTM-F2417 - Standard Specification for Fire Safety for Candles
- ASTM-F2601 - Standard Specification for Fire Safety for Candle Accessories
- ASTM-F3186 - Standard Specification for Adult Portable Bed Rails and Related Products
- ASTM-F400 - Standard Consumer Safety Specification for Lighters
- ASTM-PS135 - Standard Provisional Specification for Labeling for Upright Brooms for Consumer and Institutional Use (Withdrawn 2005)
- ASTM-PS137 - Standard Provisional Specification for Labeling for Wet Mops for Consumer and Institutional Use (Withdrawn 2005)
BSI:
- BS-1970 - Hot water bottles manufactured from rubber and PVC. Specification
- BS-3415 - Specification for venetian blinds
- BS-3456-2-2.17 - Specification for safety of household and similar electrical appliances. Particular requirements. Electric sewing machines
- BS-3456-2-2.36 - Specification for safety of household electrical appliances. Particular requirements. Battery chargers
- BS-3999-6 - Methods of measuring the performance of household electrical appliances. Electrically-heated blankets
- BS-6170 - Specification for flax canvas water buckets
- BS-6728-1 - Thermoplastics hot water bottles
- BS-7272-1 - Writing and marking instruments
- BS-7272-2 - Writing and marking instruments
- BS-7660 - Specification for safety pins for general use
- BS-7952 - Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances
- BS-8445 - Bath and shower mats. Testing. Assessment of slip resistance properties
- BS-EN-13869 - Lighters. Child safety requirements for lighters. Safety requirements and test methods
- BS-EN-13869-TC - Tracked Changes. Lighters. Child safety requirements for lighters. Safety requirements and test methods
- BS-EN-14059 - Decorative oil lamps. Safety requirements and test methods
- BS-EN-14798 - Glass packaging. Hand-held crown bottle openers. Dimensions
- BS-EN-14887 - Glass packaging. Cork removal devices. General requirements
- BS-EN-15426 - Candles. Specification for sooting behaviour
- BS-EN-15426-TC - Tracked Changes. Candles. Specification for sooting behaviour
- BS-EN-15493 - Candles. Specification for fire safety
- BS-EN-15494 - Candles. Product safety labels
- BS-EN-1647 - Leisure accommodation vehicles. Caravan holiday homes. Habitation requirements relating to health and safety
- BS-EN-1783 - Matches. Performance requirements, safety and classification
- BS-EN-60335-2-28 - Household and similar electrical appliances. Safety
- BS-EN-60335-2-29 - Household and similar electrical appliances. Safety
- BS-EN-60335-2-41 - Household and similar electrical appliances. Safety
- BS-EN-60335-2-55 - Household and similar electrical appliances. Safety
- BS-EN-60335-2-56 - Household and similar electrical appliances. Safety
- BS-EN-60335-2-59 - Household and similar electrical appliances. Safety
- BS-EN-60335-2-60 - Household and similar electrical appliances. Safety
- BS-EN-60335-2-82 - Household and similar electrical appliances. Safety
- BS-EN-62637-2 - Battery charging interface for small handheld multimedia devices
- BS-EN-721 - Leisure accommodation vehicles. Safety ventilation requirements
- BS-EN-IEC-60335-2-29 - Household and similar electrical appliances. Safety
- BS-EN-IEC-60335-2-41 - Household and similar electrical appliances. Safety
- BS-EN-IEC-60335-2-82 - Household and similar electrical appliances. Safety
- BS-EN-IEC-60335-2-82-TC - Tracked Changes. Household and similar electrical appliances. Safety
- BS-EN-ISO-9994 - Lighters. Safety specification
- BS-ISO-22702 - Utility lighters. Safety specifications
- BS-ISO-27668-1 - Gel ink ball pens and refills
- BS-ISO-27668-1-TC - Tracked Changes. Gel ink ball pens and refills
- BS-ISO-27668-2 - Gel ink ball pens and refills
- PAS-66 - Official identification eartags for sheep and goats. Specification
IEC:
- IEC-60335-2-120 - Household and similar electrical appliances - Safety - Part 2-120: Particular requirements for the safety of appliances for the generation of directly inhalable aerosols
- IEC-60335-2-28 - Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines
- IEC-60335-2-28-1 - Amendment 1: Household & Similar Electrical Appliances - Safety - Part 2-28: Particula
- IEC-60335-2-28-RL - Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines
- IEC-60335-2-29 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
- IEC-60335-2-29-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
- IEC-60335-2-29/A2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
- IEC-60335-2-29-AM1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
- IEC-60335-2-41 - Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
- IEC-60335-2-41-1 - Amendment 1: Household & Similar Electrical Appliances - Safety - Part 2-41: Particular Re
- IEC-60335-2-41/A2 - Amendment 2: Household & Similar Electrical Appliances - Safety - Part 2-41: Particula
- IEC-60335-2-41 CMV - Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
- IEC-60335-2-41-CMV - Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
- IEC-60335-2-41-EXV - Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
- IEC-60335-2-54 - Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
- IEC-60335-2-54-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
- IEC-60335-2-54-2 - Amendment 2: Household & Similar Electrical Appliances - Safety - Part 2-54: Particula
- IEC-60335-2-54-AM2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
- IEC-60335-2-56 - Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
- IEC-60335-2-56-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
- IEC-60335-2-56-2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
- IEC-60335-2-59 - Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
- IEC-60335-2-59-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
- IEC-60335-2-59/A2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
- IEC-60335-2-82 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
- IEC-60335-2-82-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
- IEC-60335-2-82-2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
- IEC-60335-2-82-AM1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
- IEC-62637-1 - Battery charging interface for small handheld multimedia devices - Part 1: 2 mm barrel interface
- IEC-62637-2 - Battery charging interface for small handheld multimedia devices - Part 2: 2 mm barrel type interface conformance testing
ISO:
- ISO-11540 - Writing and marking instruments - Specification for caps to reduce the risk of asphyxiation
- ISO-12756 - Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary
- ISO-12756-AM1 - Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary - Amendment 1: Viscosity of the writing fluid
- ISO-12757-1 - Ball point pens and refills - Part 1: General use
- ISO-14145-1 - Roller ball pens and refills - Part 1: General use
- ISO-14145-1-AM1 - Roller ball pens and refills - Part 1: General use - Amendment 1: Ball diameter for tip classification
- ISO-20318-1 - Mechanical pencils and leads for general use - Classification, dimensions, quality and test methods - Part 1: Mechanical pencils
- ISO-20318-2 - Mechanical pencils and leads for general use - Classification, dimensions, quality and test methods - Part 2: Black leads
- ISO-22702 - Utility lighters - Safety specifications
- ISO-22702-1 - - Amendment 1: Clarification of requirements and addition of safety symbols
- ISO-27668-1 - Gel ink ball pens and refills - Part 1: General use
- ISO-9177-1 - Mechanical pencils for technical drawings - Part 1: Classification, dimensions, performance requirements and testing
- ISO-9177-2 - Mechanical pencils for technical drawings - Part 2: Black leads - Classification and dimensions
- ISO-9177-3 - Mechanical pencils for technical drawings - Part 3: Black leads - Bending strengths of HB leads
- ISO-9994 - Lighters - Safety specifications
- ISO-9994-1 - Lighters - Safety specification - Amendment 1: Clarification of structural requirements
- ISO/DIS-27668-1 - Part 1: General Use, Gel Ink Ball Pens and Refills
Other SDOs:
- DIN-EN-13869 - Lighters - Child safety requirements for lighters - Safety requirements and test methods; German version EN 13869:2016
- DIN-EN-14798 - Glass Packaging - Hand-Held Crown Bottle Openers - Dimensions
- DIN-EN-14887 - Glass Packaging - Cork Removal Devices - General Requirements
- DIN-EN-ISO-9994 - Lighters - Safety Specification
- EN-13869 - Lighters - Child safety requirements for lighters - Safety requirements and test methods
- EN-14798 - Glass Packaging - Hand-Held Crown Bottle Openers - Dimensions
- EN-14887 - Glass Packaging - Cork Removal Devices - General Requirements
- EN-15426 - Candles - Specificatioon for Sooting Behaviour
- EN-15493 - Candles, Specification for Fire Safety
- EN-15494 - Candles, Product Safety Labels
- EN-60335-2-28 - Specification for Safety of Household & Similar Electrical Appliances, Particular Requ
- EN-60335-2-54 - Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
- EN-60335-2-55 - Specification for Safety of Household & Similar Electrical Appliances, Particular Requ
- EN-60335-2-56 - Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
- EN-60335-2-60 - Part 2-60: Particular Requirements for Whirlpool Baths & Whirlpool Spas, Household & S
- EN-60335-2-82 - Specification for Safety of Household & Similar Electrical Appliances, Particular Requ
- EN-62637-1 - Battery charging interface for small handheld multimedia devices - Part 1: 2 mm barrel interface
- EN-62637-2 - Battery charging interface for small handheld multimedia devices - Part 2: 2 mm barrel type interface conformance testing
- EN-721 - Leisure Accommodation Vehicles, Safety Ventilation Requirements
- EN-ISO-9994 - Lighters - Safety Specification
- SS-EN-1154 - Building hardware - Controlled door closing devices - Requirements and test methods
- SS-EN-1154-AM1 - Building hardware - Controlled door closing devices - Requirements and test methods
- SS-EN-13869 - Lighters - Child safety requirements for lighters - Safety requirements and test methods
- SS-EN-14798 - Glass packaging - Hand-held crown bottle openers - Dimensions
- SS-EN-14887 - Glass packaging - Cork removal devices - Recommendations
- SS-EN-17616 - Outdoor candles - Specification for fire safety
- SS-EN-17617 - Outdoor candles - Product safety labels
- SS-EN-1783-AM1 - Matches - Performance requirements, safety and classification
- SS-EN-17885 - Candle Accessories - Specification for fire safety and product safety labels
- SS-EN-60335-2-29 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
- SS-EN-ISO-9994-AM1 - Lighters - Safety specification - Amendment 1: Clarification of structural requirements (ISO 9994:2006/Amd 1:2008)
- SS-ISO-11540 - Writing and marking instruments - Specification for caps to reduce the risk of asphyxiation (ISO 11540:2014, IDT)
- SS-ISO-12756 - Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary (ISO 12756:2016, IDT)
- SS-ISO-12756-AM1 - Drawing and writing instruments - Ballpoint pens and roller ball pens - Vocabulary - AMENDMENT 1: Viscosity of the writing fluid (ISO 12756:1998/Amd.1:2011, IDT)
- SS-ISO-12757-1 - Ball point pens and refills - Part 1: General use (ISO 12757-1:2017, IDT)
- SS-ISO-13226 - Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2018, IDT)
- SS-ISO-14145-1 - Roller ball pens and refills - Part 1: General use (ISO 14145-1:2017, IDT)
- SS-ISO-14145-1-AM1 - Roller ball pens and refills - Part 1: General use - Amendment 1: Ball diameter for tip classification (ISO 14145-1:1998/Amd 1:2011, IDT)
- SS-ISO-20318-1 - Mechanical pencils and leads for general use - Classification, dimensions, quality and test methods - Part 1: Mechanical pencils (ISO 20318-1:2019, IDT)
- SS-ISO-20318-2 - Mechanical pencils and leads for general use - Classification, dimensions, quality and test methods - Part 2: Black leads (ISO 20318-2:2019, IDT)
- SS-ISO-27668-1 - Gel ink ball pens and refills - Part 1: General use (ISO 27668-1:2017, IDT)
- SS-ISO-9177-1 - Mechanical pencils for technical drawings - Part 1: Classification, dimensions, performance requirements and testing (ISO 9177-1:2016, IDT)
- SS-ISO-9994 - Lighters - Safety specification