Document Center List of Standards on Road Equipment And Installations Including Road Traffic Warning And Control Systems, Devices And Installations (Speed Controls, Traffic Signal Installations, Vehicle Loop Detectors, Pavement Markers, Manholes, Etc.)
ICS Code 93.080.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1169 - Standard Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance (Withdrawn 2021)
- ASTM-C1189 - Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors
- ASTM-C850 - Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings (Withdrawn 2000)
- ASTM-C850M - Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings [Metric] (Withdrawn 2000)
- ASTM-C993 - Standard Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors (Withdrawn 2021)
- ASTM-D1309 - Standard Test Method for Settling Properties of Traffic Paints During Storage (Withdrawn 2020)
- ASTM-D2205 - Standard Guide for Selection of Tests for Traffic Paints
- ASTM-D2743 - Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography (Withdrawn 2015)
- ASTM-D2792 - Standard Practice for Solvent and Fuel Resistance of Traffic Paint
- ASTM-D4797 - Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
- ASTM-D4956 - Standard Specification for Retroreflective Sheeting for Traffic Control
- ASTM-D4960 - Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials
- ASTM-D711 - Standard Test Method for No-Pick-Up Time of Traffic Paint
- ASTM-D713 - Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
- ASTM-D7307 - Standard Practice for Sampling of Thermoplastic Pavement Marking Materials
- ASTM-D7308 - Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
- ASTM-D7377 - Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet
- ASTM-D7539 - Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
- ASTM-D7735 - Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
- ASTM-D7942 - Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas
- ASTM-D868 - Standard Practice for Determination of Degree of Bleeding of Traffic Paint
- ASTM-D969 - Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint (Withdrawn 2010)
- ASTM-E1501 - Standard Specification for Nighttime Photometric Performance of Retroreflective Pedestrian Markings for Visibility Enhancement (Withdrawn 2013)
- ASTM-E1709 - Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
- ASTM-E1743 - Standard Practice for Selection and Use of Portable Retroreflectomers for the Measurement of Pavement Marking Materials (Withdrawn 2003)
- ASTM-E1957 - Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers
- ASTM-E2366 - Standard Test Method for Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable Reflection Colorimeter (Withdrawn 2014)
- ASTM-E2367 - Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
- ASTM-E2415 - Standard Practice for Installing Piezoelectric Highway Traffic Sensors
- ASTM-E2561 - Standard Practice for the Installation of Inductive Loop Detectors
- ASTM-E811 - Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
- ASTM-F2656 - Standard Test Method for Crash Testing of Vehicle Security Barriers
BSI:
- BS-3049 - Specification. Pedestrian Guard Rails (Metal)
- BS-3262-3 - Hot-applied thermoplastic road marking materials
- BS-505 - Specification for road traffic signals
- BS-5911-230 - Precast Concrete Pipes, Fittings & Ancillary Products, Specification for Road Guillies
- BS-5911-6 - Concrete pipes and ancillary concrete products
- BS-5911-6-TC - Tracked Changes. Concrete pipes and ancillary concrete products
- BS-6088 - Specification for solid glass beads for use with road marking compounds and for other industrial uses
- BS-6571-1 - Vehicle parking control equipment
- BS-6571-2 - Vehicle parking control equipment
- BS-6571-4 - Vehicle parking control equipment
- BS-6571-6 - Vehicle parking control equipment
- BS-6571-8 - Vehicle parking control equipment
- BS-6579-3 - Safety fences and barriers for highways
- BS-6579-4 - Safety fences and barriers for highways
- BS-6579-5 - Safety fences and barriers for highways
- BS-6579-6 - Safety fences and barriers for highways
- BS-6579-7 - Safety fences and barriers for highways
- BS-6579-8 - Safety fences and barriers for highways
- BS-7396 - Specification for permanent preformed road markings
- BS-7669-3 - Vehicle restraint systems
- BS-7818 - Specification for pedestrian restraint systems in metal
- BS-7903 - Selection and installation of manhole tops and gully tops within the highway. Guide
- BS-7903-TC - Tracked Changes. Selection and installation of manhole tops and gully tops within the highway. Guide
- BS-7987 - Road Traffic Signal Systems
- BS-8408 - Road traffic signs. Testing and performance of microprismatic retroreflective sheeting materials. Specification
- BS-8442 - Miscellaneous road traffic signs and devices. Requirements and test methods
- BS-873-1 - Road traffic signs and internally illuminated bollards
- BS-873-2 - Road traffic signs and internally illuminated bollards
- BS-873-3 - Specification for Internally Illuminated Bollards
- BS-873-4 - Road traffic signs and internally illuminated bollards
- BS-873-5 - Road traffic signs and internally illuminated bollards
- BS-873-6 - Specification for Retroreflective & Non-Retroreflective Signs
- BS-873-7 - Specification for Posts & Fittings
- BS-873-8 - Specification for Traffic Cones and Cylinders
- BS-9124 - Specification for steel and aluminium access cover systems with over 1 m clear opening
- BS-CEN-1793-5 - Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of sound reflection and airborne sound insulation
- BS-EN-12352 - Traffic control equipment. Warning and safety light devices
- BS-EN-12368 - Traffic control equipment. Signal heads
- BS-EN-12368-TC - Tracked Changes. Traffic control equipment. Signal heads
- BS-EN-124 - Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control
- BS-EN-124-1 - Gully tops and manhole tops for vehicular and pedestrian areas
- BS-EN-12414 - Vehicle parking control equipment. Requirements and test methods for a parking terminal
- BS-EN-124-2 - Gully tops and manhole tops for vehicular and pedestrian areas
- BS-EN-124-3 - Gully tops and manhole tops for vehicular and pedestrian areas
- BS-EN-124-4 - Gully tops and manhole tops for vehicular and pedestrian areas
- BS-EN-124-5 - Gully tops and manhole tops for vehicular and pedestrian areas
- BS-EN-124-6 - Gully tops and manhole tops for vehicular and pedestrian areas
- BS-EN-12675 - Traffic signal controllers. Functional safety requirements
- BS-EN-12675-TC - Tracked Changes. Traffic signal controllers. Functional safety requirements
- BS-EN-12676-1 - Anti-glare systems for roads
- BS-EN-12676-2 - Anti-glare systems for roads
- BS-EN-12767 - Passive safety of support structures for road equipment. Requirements and test methods
- BS-EN-12899-1 - Fixed, vertical road traffic signs
- BS-EN-12899-2 - Fixed, vertical road traffic signs
- BS-EN-12899-3 - Fixed, vertical road traffic signs
- BS-EN-12899-4 - Fixed, vertical road traffic signs
- BS-EN-12899-5 - Fixed, vertical road traffic signs. Initial type testing
- BS-EN-12966 - Road vertical signs. Variable message traffic signs
- BS-EN-12966-1 - Road vertical signs. Variable message traffic signs. Product standard
- BS-EN-12966-2 - Road vertical signs. Variable message traffic signs
- BS-EN-12966-3 - Road vertical signs. Variable message traffic signs
- BS-EN-1317-1 - Road restraint systems
- BS-EN-1317-2 - Road restraint systems
- BS-EN-1317-3 - Road restraint systems
- BS-EN-1317-5 - Road restraint systems
- BS-EN-13422 - Vertical road signs. Portable deformable warning devices and delineators. Portable road traffic signs. Cones and cylinders
- BS-EN-1433 - Drainage channels for vehicular and pedestrian areas. Classification, design and testing requirements, marking and evaluation of conformity
- BS-EN-14339 - Underground fire hydrants
- BS-EN-1436 - Road marking materials. Road marking performance for road users and test methods
- BS-EN-14388 - Road traffic noise reducing devices. Specifications
- BS-EN-14389 - Road traffic noise reducing devices. Procedures for assessing long term performance
- BS-EN-14389-1 - Road traffic noise reducing devices. Procedures for assessing long term performance
- BS-EN-14389-1-TC - Tracked Changes. Road traffic noise reducing devices. Procedures for assessing long term performance
- BS-EN-14389-2 - Road traffic noise reducing devices. Procedures for assessing long term performance
- BS-EN-14389-2-TC - Tracked Changes. Road traffic noise reducing devices. Procedures for assessing long term performance
- BS-EN-16272-3-2 - Railway applications. Infrastructure. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance
- BS-EN-16272-6 - Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance
- BS-EN-16303 - Road restraint systems. Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
- BS-EN-1793-1 - Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-1-TC - Tracked Changes. Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-2 - Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-2-TC - Tracked Changes. Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-4 - Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-5 - Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-6 - Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-6-TC - Tracked Changes. Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1794-1 - Road traffic noise reducing devices. Non-acoustic performance
- BS-EN-1794-2 - Road traffic noise reducing devices. Non-acoustic performance
- BS-EN-1794-3 - Road traffic noise reducing devices. Non-acoustic performance
- BS-EN-50293 - Road traffic signal systems. Electromagnetic compatibility
- BS-EN-50556 - Road traffic signal systems
- BS-EN-50556-TC - Tracked Changes. Road traffic signal systems
- BS-ISO-22343-1 - Security and resilience. Vehicle security barriers
- BS-ISO-23600 - Assistive products for persons with vision impairments and persons with vision and hearing impairments. Acoustic and tactile signals for pedestrian traffic lights
- DD-CLC-50509 - Use of LED signal heads in road traffic signal systems
- DD-ENV-1317-4 - Road restraint systems
- DD-ENV-13563 - Traffic control equipment. Vehicle detectors
- PAS-170-1 - Vehicle security barriers. Low speed impact testing
- PAS-25 - Plastics frames for use in gully tops and manhole tops for pedestrian areas
- PAS-68 - Impact test specifications for vehicle security barrier systems
- PAS-69 - Guidance for the selection, installation and use of vehicle security barrier systems
- PD-6634-1 - Vehicle restraint systems
- PD-6634-2 - Vehicle restraint systems
- PD-6634-3 - Vehicle restraint systems
- PD-6634-4 - Vehicle restraint systems
- PD-6634-5 - Vehicle restraint systems
- PD-6634-6 - Vehicle restraint systems
- PD-CEN-1317-10 - Road restraint system
- PD-CEN-1317-10-TC - Tracked Changes. Road restraint system
- PD-CEN-1317-6 - Road restraint systems
- PD-CEN-1317-8 - Road restraint systems
- PD-CEN-16303-1 - Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system
- PD-CEN-16303-2 - Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system
- PD-CEN-16303-3 - Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system
- PD-CEN-16303-4 - Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system
- PD-CEN-16949 - Road restraint system. Pedestrian restraint system. Pedestrian parapets
- PD-CEN-16949-TC - Tracked Changes. Road restraint system. Pedestrian restraint system. Pedestrian parapets
- PD-CEN-17342 - Road restraint systems. Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
- PD-CEN-17812 - Determination of the acoustic properties of markings. The CPX measurement method
IEC:
- IEC-60598-2-3 - Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
- IEC-60598-2-3-1 - Amendment 1 - Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
ISO:
- ISO-16508 - Road traffic lights - Photometric properties of 200 mm roundel signals
- ISO-22343-1 - Security and resilience - Vehicle security barriers - Part 1: Performance requirement, vehicle impact test method and performance rating
- ISO-22343-2 - Security and resilience - Vehicle security barriers - Part 2: Application
Other SDOs:
- DIN-EN-12352 - Traffic Control Equipment - Warning & Safety Light Devices
- DIN-EN-12368 - Traffic control equipment - Signal heads; German version EN 12368:2015
- DIN-EN-12676-1 - Part 1: Performance & Characteristics, Anti-Glare Screens for Roads
- DIN-EN-12899-1 - Fixed, vertical road traffic signs - Part 1: Fixed signs
- DIN-EN-12966-1 - Road vertical signs - Variable message traffic signs - Part 1: Product standard; German version EN 12966-1:2005+A1:2009
- DIN-EN-12966-2 - Road vertical signs - Variable message traffic signs - Part 2: Initial type testing; German version EN 12966-2:2005
- DIN-EN-12966-3 - Road vertical signs - Variable message traffic signs - Part 3: Factory production control; German version EN 12966-3:2005
- DIN-EN-1317-2 - Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets; German version EN 1317-2:2010
- DIN-EN-13422 - Vertical Road Signs - Portable Deformable Warning Devices & Delineators - Portable Ro
- DIN-EN-1433 - Drainage Channels for Vehicular & Pedestrian Areas, Classification, Design & Testing R
- DIN-EN-14339 - Underground Fire Hydrants
- DIN-EN-14388 - Road traffic noise reducing devices - Specifications; German version EN 14388:2015
- DIN-EN-14389-2 - Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics; German version EN 14389-2:2015
- DIN-EN-1794-1 - Part 1: Mechanical Performance & Stability Requirements, Road Traffic Noise Reducing D
- DIN-EN-1794-2 - Part 2: General Safety & Environmental Requirements, Road Traffic Noise Reducing Devic
- EN-12352 - Traffic Control Equipment, Warning & Safety Light Devices
- EN-12368 - Traffic control equipment - Signal heads
- EN-124-1 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
- EN-12414 - Vehicle Parking Control Equipment, Pay & Display Ticket Machines, Technical & Function
- EN-124-2 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron
- EN-124-3 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
- EN-124-4 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
- EN-124-5 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
- EN-124-6 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
- EN-12675 - Traffic signal controllers - Functional safety requirements
- EN-12767 - Passive Safety of Support Structures for Road Equipment, Requirements, Classification
- EN-12899-1 - Fixed, vertical road traffic signs - Part 1: Fixed signs
- EN-12899-3 - Fixed, Vertical Road Traffic Signs, Delineator Posts & Retroreflectors
- EN-12899-4 - Fixed, Vertical Road Traffic Signs, Factory Production Control
- EN-12899-5 - Fixed, Vertical Road Traffic Signs, Initial Type Testing
- EN-12966 - Road vertical signs - Variable message traffic signs
- EN-12966-1 - Road Vertical Signs, Variable Message Traffic Signs, Product Standard
- EN-12966-2 - Part 2: Initial Type Testing, Road Vertical Signs - Variable Message Traffic Signs
- EN-12966-3 - Part 3: Factory Production Control, Road Vertical Signs - Variable Message Traffic Sig
- EN-1317-1 - Part 1: Terminology & General Criteria for Test Methods, Road Restraint Systems
- EN-1317-2 - Part 2: Performance Classes, Impact Test Acceptance Criteria & Test Methods for Safety
- EN-1317-3 - Part 3: Performance Classes, Impact Test Acceptance Criteria & Test Methods for Crash
- EN-1317-5 - Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
- EN-13422 - Vertical Road Signs - Portable Deformable Warning Devices & Delineators - Portable Ro
- EN-1433 - Drainage Channels for Vehicular & Pedestrian Areas, Classification, Design & Testing R
- EN-14339 - Underground Fire Hydrants
- EN-1436 - Road Marking Materials - Road Marking Performance for Road Users
- EN-14388 - Road traffic noise reducing devices - Specifications
- EN-14389-1 - Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
- EN-14389-2 - Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
- EN-16272-3-2 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct field applications
- EN-16272-6 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- EN-1793-1 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
- EN-1793-2 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
- EN-1793-4 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
- EN-1793-5 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
- EN-1793-6 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- EN-1794-1 - Part 1: Mechanical Performance & Stability Requirements, Road Traffic Noise Reducing D
- EN-1794-2 - Part 2: General Safety & Environmental Requirements, Road Traffic Noise Reducing Devic
- EN-1794-3 - Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification
- EN-50293 - Road traffic signal systems - Electromagnetic compatibility
- EN-50556 - Road traffic signal systems
- IWA-14-1 - Vehicle security barriers - Part 1: Performance requirement, vehicle impact test method and performance rating
- IWA-14-2 - Vehicle security barriers - Part 2: Application
- JIS-A-5361 - Precast concrete products -- General rules for classification, designation and marking
- JIS-A-5362 - Precast concrete products -- Required performance and methods of verification
- JIS-A-5363 - Precast concrete products - General rules for methods of performance test
- JIS-A-5364 - Precast concrete products -- General rules of materials and product methods
- JIS-A-5365 - Precast concrete products -- General rules for method of inspection
- JIS-A-5371 - Precast unreinforced concrete products
- JIS-A-5372 - Precast reinforced concrete products
- JIS-A-5373 - Precast prestressed concrete products
- SIS-CEN-17342 - Road restraint systems - Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
- SIS-CEN/TR-1317-10 - Road restraint systems - Part 10: Assessment methods and design guidelines for transitions, terminal and crash cushion connection - transitions
- SIS-CEN/TR-1317-6 - Road restraint systems - Part 6: Pedestrian restraint system - Pedestrian parapets
- SIS-CEN/TR-16949 - Road restraint system - Pedestrian restraint system - Pedestrian parapets
- SIS-CEN/TS-1317-7 - Road restraint systems -Part 7: Performance characterisation and test methods for terminals of safety barriers
- SIS-CEN/TS-1317-8 - Road restraint systems - Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
- SIS-CEN/TS-1317-9 - Road restraint systems - Part 9: Impact tests and test methods for removable barrier sections
- SIS-CEN/TS-17812 - Determination of the acoustic properties of markings - The CPX measurement method
- SIS-CEN/TS-1793-4 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
- SIS-CEN/TS-1793-5 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection and airborne sound insulation
- SIS-ISO/TS-15624 - Road vehicles - Traffic impediment warning systems (TIWS) - System requirements
- SS-EN-12352 - Traffic control equipment - Warning and safety light devices
- SS-EN-12354-5 - Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 5: Sounds levels due to the service equipment
- SS-EN-12368 - Traffic control equipment - Signal heads
- SS-EN-124-1 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
- SS-EN-124-2 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron
- SS-EN-124-3 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
- SS-EN-124-4 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
- SS-EN-124-5 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
- SS-EN-124-6 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
- SS-EN-12675 - Traffic signal controllers - Functional safety requirements
- SS-EN-12676-1 - Anti-glare systems for roads - Part 1: Performance and characteristics
- SS-EN-12676-1-AM1 - Anti-glare screens for roads - Part 1: Performance and characteristics
- SS-EN-12676-2 - Road equipment - Anti-glare systems for roads - Part 2: Test methods
- SS-EN-12767 - Passive safety of support structures for road equipment - Requirements and test methods
- SS-EN-12899-1 - Fixed, vertical road traffic signs - Part 1: Fixed signs
- SS-EN-12899-2 - Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
- SS-EN-12899-3 - Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
- SS-EN-12899-4 - Fixed, vertical road traffic signs - Part 4: Factory production control
- SS-EN-12899-5 - Fixed, vertical road traffic signs - Part 5: Initial type testing
- SS-EN-12966 - Road vertical signs - Variable message traffic signs
- SS-EN-12966-1 - Road vertical signs - Variable message traffic signs - Part 1: Product standard
- SS-EN-12966-2 - Road vertical signs - Variable message traffic signs - Part 2: Initial type testing
- SS-EN-12966-3 - Road vertical signs - Variable message traffic signs - Part 3: Factory production control
- SS-EN-1317-1 - Road restraint systems - Part 1: Terminology and general criteria for test methods
- SS-EN-1317-2 - Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets
- SS-EN-1317-2-AM1 - Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety
- SS-EN-1317-3 - Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions
- SS-EN-1317-5 - Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
- SS-EN-13422 - Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders
- SS-EN-1433 - Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
- SS-EN-14339 - Underground fire hydrants
- SS-EN-1433-AM1 - Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
- SS-EN-1436 - Road marking materials - Road marking performance for road users and test methods
- SS-EN-14388 - Road traffic noise reducing devices - Specifications
- SS-EN-14389 - Road traffic noise reducing devices - Procedures for assessing long term performance
- SS-EN-14389-1 - Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
- SS-EN-14389-2 - Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
- SS-EN-1463-1 - Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
- SS-EN-1463-1-AM1 - Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
- SS-EN-1463-2 - Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications
- SS-EN-15048-1 - Non-preloaded structural bolting assemblies - Part 1: General requirements
- SS-EN-16272-3-2 - Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct sound field applications
- SS-EN-16272-4 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field
- SS-EN-16272-6 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- SS-EN-16303 - Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
- SS-EN-1793-1 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
- SS-EN-1793-2 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
- SS-EN-1793-3 - Road traffic noise reducing devices - Test methodfor determining the acoustic performance - Part 3: Normalized traffic noise spectrum
- SS-EN-1793-4 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
- SS-EN-1793-5 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
- SS-EN-1793-6 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- SS-EN-1794-1 - Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements
- SS-EN-1794-2 - Road traffic noise reducing devices - Non-acoustic performance - Part 2: General safety and environmental requirements
- SS-EN-1794-3 - Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification
- SS-EN-1824 - Road marking materials - Road trials
- SS-ENV-1317-4 - Road restraint systems - Part 4: Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
- SS-ENV-13563 - Traffic control equipment - Vehicle detectors
- SS-ISO-6976 - Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition (ISO 6976:1995/Cor 2:1997, IDT)
- UNE-199121-4 - Road traffic management equipment. Instanteous speed speedometers. Part 4: Functional specifications and applying protocols
- UNE-199124-4 - Road traffic management equipment. Stationary average speed in section speedometers. Part 4: Functional specifications and applying protocols
- UNE-199124-5 - Road traffic management equipment. Stationary average speed in section speedometers. Part 5: Specifications for road sided installations.
- UNE-EN-124-1 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
- UNE-EN-14388 - Road traffic noise reducing devices - Specifications
- UNE-EN-1793-1 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption