Document Center List of Standards on Other Construction Materials
ICS Code 91.100.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-B882 - Standard Specification for Pre-Patinated Copper for Architectural Applications
- ASTM-C1046 - Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
- ASTM-C1397 - Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
- ASTM-C1516 - Standard Practice for Application of Direct-Applied Exterior Finish Systems
- ASTM-C519 - Test Method for Density of Fibrous Loose Fill Building Insulations (Withdrawn 1995)
- ASTM-D4016 - Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method) (Withdrawn 2023)
- ASTM-D6103 - Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
- ASTM-D6213 - Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
- ASTM-D6525 - Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
- ASTM-D6662 - Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
- ASTM-D8030 - Standard Practice for Sample Preparation for GCCM
- ASTM-D8172 - Standard Test Method for Shear and Peel Strength of Solvent-Welded Seams with Nonreinforced Geomembranes
- ASTM-D8173 - Standard Guide for Site Preparation, Layout, Installation, and Hydration of Geosynthetic Cementitious Composite Mats
- ASTM-E1637 - Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
- ASTM-E1730 - Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
- ASTM-E2110 - Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
- ASTM-E2134 - Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
- ASTM-F1645 - Standard Test Method for Water Migration in Honeycomb Core Materials
- ASTM-PS72 - Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) (Withdrawn 2001)
BSI:
- BS-1369-1 - Steel lathing for internal plastering and external rendering
- BS-1521 - Specification for waterproof building papers
- BS-3892-2 - Pulverized-fuel ash. Specification for pulverized-fuel ash for use in grouts and for miscellaneous uses in concrete
- BS-4046 - Specification for compressed straw building slabs
- BS-7619 - Extruded cellular unplasticized white PVC (PVCUE) profiles. Specification
- BS-EN-10025-3-TC - Tracked Changes. Hot rolled products of structural steels
- BS-EN-10025-4-TC - Tracked Changes. Hot rolled products of structural steels
- BS-EN-10025-5-TC - Tracked Changes. Hot rolled products of structural steels
- BS-EN-10025-6-TC - Tracked Changes. Hot rolled products of structural steels
- BS-EN-12706 - Adhesives. Test methods for hydraulic setting floor smoothing and/or levelling compounds. Determinatiion of flow characteristics
- BS-EN-1279-2-TC - Tracked Changes. Glass in building. Insulating glass units
- BS-EN-13408 - Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of bond strength
- BS-EN-13409 - Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of setting time
- BS-EN-13851 - Methods of Test for Hydraulic Setting Floor Smoothing &/or Leveling Compounds, Determi
- BS-EN-16566 - Paints and varnishes. Fillers for internal and/or external works. Adaptation of fillers to European standards
Other SDOs:
- DIN-EN-13872 - Methods of Test for Smoothing &/or Levelling Compounds, Determination of Shrinkage
- DIN-EN-14964 - Rigid Underlays for Discontinuous Roofing - Definitions & Characteristics
- EN-13408 - Methods of Test for Hydraulic Setting Floor Smoothing &/or Leveling Compounds, Determi
- EN-13409 - Methods of Test for Hydraulic Setting Floor Smoothing &/or Leveling Compounds
- EN-16566 - Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards
- JIS-A-1192 - Test method for tensile properties of fiber reinforced polymer (FRP) bars and grids for reinforcement of concrete
- JIS-A-1193 - Test method for alkali resistance of fiber reinforced polymer (FRP) bars and grids for reinforcement of concrete
- JIS-A-5011-4 - Slag aggregate for concrete -- Part 4: Electric arc furnace oxidizing slag aggregate
- SS-EN-12085 - Thermal insulating products for building applications - Determination of linear dimensions of test specimens
- SS-EN-12086 - Thermal insulating products for building applications - Determination of water vapour transmission properties
- SS-EN-12087 - Thermal insulating products for building applications - Determination of long term water absorption by immersion
- SS-EN-12087-AM1 - Thermal insulating products for building applications - Determination of long term water absorption by immersion
- SS-EN-12088 - Thermal insulating products for building applications - Determination of long term water absorption by diffusion
- SS-EN-12089 - Thermal insulating products for building applications - Determination of bending behaviour
- SS-EN-12090 - Thermal insulating products for building applications - Determination of shear behaviour
- SS-EN-12091 - Thermal insulating products for building applications - Determination of freeze-thaw resistance
- SS-EN-12430 - Thermal insulating products for building applications - Determination of behaviour under point load
- SS-EN-12430-AM1 - Thermal insulating products for building applications - Determination of behaviour under point load
- SS-EN-12431 - Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
- SS-EN-12431-AM1 - Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
- SS-EN-12600 - Glass in building - Pendulum test - Impact test method and classification for flat glass
- SS-EN-12706 - Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics
- SS-EN-1279-2 - Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
- SS-EN-13408 - Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength
- SS-EN-13409 - Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time
- SS-EN-13579 - Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation
- SS-EN-13851 - Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of flexural and compressive strength
- SS-EN-13872 - Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change
- SS-EN-16566 - Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards
- SS-EN-1937 - Test method för hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures
- SS-EN-ISO-16535 - Thermal insulating products for building applications - Determination of long-term water absorption by immersion (ISO 16535:2019)
- SS-EN-ISO-16536 - Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (ISO 16536:2019)
- SS-EN-ISO-29768 - Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO 29768:2022)
- SS-EN-ISO-29770 - Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products (ISO 29770:2022)