Document Center List of Standards on Steel Structures
ICS Code 91.080.13
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A944 - Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM-F1234 - Specification for Protective Coatings on Steel Framework for Fences (Withdrawn 1995)
BSI:
- BS-EN-1090-2-TC - Tracked Changes. Execution of steel structures and aluminium structures
- BS-EN-1090-4 - Execution of steel structures and aluminium structures
- BS-EN-1090-5 - Execution of steel structures and aluminium structures
- BS-EN-13381-10 - Test methods for determining the contribution to the fire resistance of structural members
- BS-EN-1993-1-13 - Eurocode 3. Design of steel structures
- BS-EN-1993-1-1-TC - Tracked Changes. Eurocode 3. Design of steel structures
- BS-EN-1993-1-3-TC - Tracked Changes. Eurocode 3. Design of steel structures
- BS-EN-1993-1-5-TC - Tracked Changes. Eurocode 3. Design of steel structures
- BS-EN-1993-1-8-TC - Tracked Changes. Eurocode 3. Design of steel structures
- BS-ISO-17607-1 - Steel structures. Execution of structural steelwork
- BS-ISO-17607-2 - Steel structures. Execution of structural steelwork
- BS-ISO-17607-3 - Steel structures. Execution of structural steelwork
- BS-ISO-17607-4 - Steel structures. Execution of structural steelwork
- BS-ISO-17607-5 - Steel structures. Execution of structural steelwork
- BS-ISO-17607-6 - Steel structures. Execution of structural steelwork
- PD-CEN-17052 - Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium structures
- PD-CEN-17991 - Statistical verification of partial factors for buildings according to Eurocode EN 1993-1-1 Annex E
ISO:
- ISO-10721-1 - Steel structures -- Part 1: Materials and design
- ISO-10721-2 - Steel structures -- Part 2: Fabrication and erection
- ISO-17607-1 - Steel structures - Execution of structural steelwork - Part 1: General requirements and terms and definitions
- ISO-17607-2 - Steel structures - Execution of structural steelwork - Part 2: Steels
- ISO-17607-3 - Steel structures - Execution of structural steelwork - Part 3: Fabrication
- ISO-17607-4 - Steel structures - Execution of structural steelwork - Part 4: Erection
- ISO-17607-5 - Steel structures - Execution of structural steelwork - Part 5: Welding
- ISO-17607-6 - Steel structures - Execution of structural steelwork - Part 6: Bolting
Other SDOs:
- EN-1090-4 - Execution of steel structures and aluminium structures - Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications
- EN-1090-5 - Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
- SIS-CEN/TS-1993-1-101 - Eurocode 3: Design of steel structures - Part 1-101: Alternative interaction method for members in bending and compression
- SIS-ISO/TS-13399-50 - Cutting tool data representation and exchange - Part 50: Reference dictionary for reference systems and common concepts (ISO/TS 13399-50:2013, IDT)
- SS-EN-1090-1 - Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
- SS-EN-1090-2 - Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
- SS-EN-1090-3 - Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
- SS-EN-1090-4 - Execution of steel structures and aluminium structures - Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications
- SS-EN-1090-5 - Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
- SS-EN-13120 - Internal blinds - Performance requirements including safety
- SS-EN-13245-2 - Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
- SS-EN-13381-10 - Test methods for determining the contribution to the fire resistance of structural members - Part 10: Applied protection to solid steel bars in tension
- SS-EN-13381-4 - Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members
- SS-EN-13381-8 - Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members
- SS-EN-13381-9 - Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings
- SS-EN-14878 - Textiles - Burning behaviour of children's nightwear - Specification
- SS-EN-15091 - Sanitary tapware - Electronic opening and closing sanitary tapware
- SS-EN-1829-2 - High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors
- SS-EN-1993-1-1 - Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings
- SS-EN-1993-1-10 - Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
- SS-EN-1993-1-11 - Eurocode 3: Design of steel structures - Part 1-11: Design of structures with tension components
- SS-EN-1993-1-12 - Eurocode 3: Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
- SS-EN-1993-1-1-AM1 - Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
- SS-EN-1993-1-2 - Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
- SS-EN-1993-1-3 - Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
- SS-EN-1993-1-4 - Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- SS-EN-1993-1-4-AM1 - Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- SS-EN-1993-1-4-AM2 - Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- SS-EN-1993-1-5 - Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
- SS-EN-1993-1-5-AM1 - Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
- SS-EN-1993-1-6 - Eurocode 3: Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
- SS-EN-1993-1-6-AM1 - Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
- SS-EN-1993-1-7 - Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
- SS-EN-1993-1-8 - Eurocode 3: Design of steel structures - Part 1-8: Design of joints
- SS-EN-1993-1-9 - Eurocode 3: Design of steel structures - Part 1-9: Fatigue
- SS-EN-1993-2 - Eurocode 3: Design of steel structures - Part 2: Steel bridges
- SS-EN-1993-3-1 - Eurocode 3 - Design of steel structures - Part 3-1: Towers and masts and chimneys - Towers and masts
- SS-EN-1993-3-2 - Eurocode 3: Design of steel structures - Part 3-2 : Towers, masts and chimneys - Chimneys
- SS-EN-1993-4-1 - Eurocode 3: Design of steel structures - Part 4-1: Silos
- SS-EN-1993-4-1-AM1 - Eurocode 3 - Design of steel structures - Part 4-1: Silos
- SS-EN-1993-4-2 - Eurocode 3: Design of steel structures - Part 4-2: Tanks
- SS-EN-1993-4-2-AM1 - Eurocode 3 - Design of steel structures - Part 4-2: Tanks
- SS-EN-1993-4-3 - Eurocode 3 - Design of steel structures - Part 4-3: Pipelines
- SS-EN-1993-5 - Eurocode 3: Design of steel structures - Part 5: Piling
- SS-EN-1993-6 - Eurocode 3: Design of steel structures - Part 6 : Crane supporting structures
- SS-EN-1994-1-1 - Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
- SS-EN-1994-1-2 - Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
- SS-EN-1994-1-2-AM1 - Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
- SS-EN-1994-2 - Eurocode 4 - Design of composite steel and concrete structures - Part 2: General rules and rules for bridges
- SS-EN-1999-1-3 - Eurocode 9 - Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
- SS-EN-3686 - Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 degrees Celsius
- SS-EN-861 - Safety of woodworking machines - Surface planing and thicknessing machines
- SS-EN-ISO-10407-2 - Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Inspection and classification of used drill stem elements (ISO 10407-2:2008)
- SS-EN-ISO-11117 - Gas cylinders - Valve protection caps and guards - Design, construction and tests (ISO 11117:2019)
- SS-EN-ISO-12944-1 - Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017)
- SS-EN-ISO-12944-2 - Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:2017)
- SS-EN-ISO-12944-3 - Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:2017)
- SS-EN-ISO-12944-4 - Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:2017)
- SS-EN-ISO-13628-11 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 11: Flexible pipe systems for subsea and marine applications (ISO 13628-11:2007)
- SS-EN-ISO-17226-2 - Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis (ISO 17226-2:2018)
- SS-EN-ISO-5674 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
- SS-EN-ISO-7096 - Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)
- SS-ISO-15878 - Road construction and maintenance equipment Paver-finishers Commercial specifications (ISO 15878:2021, IDT)
- SS-ISO-3601-1 - Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes (ISO 3601-1:2012, IDT)