Document Center List of Standards on Adhesives Including Adhesive Tapes Adhesive Tapes For Electrical Insulation Purposes, See 29.035.20
ICS Code 83.180
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D1002 - Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM-D1062 - Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
- ASTM-D1084 - Standard Test Methods for Viscosity of Adhesives
- ASTM-D1101 - Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
- ASTM-D1144 - Standard Practice for Determining Strength Development of Adhesive Bonds
- ASTM-D1146 - Standard Test Method for Blocking Point of Potentially Adhesive Layers
- ASTM-D1151 - Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
- ASTM-D1183 - Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
- ASTM-D1184 - Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
- ASTM-D1304 - Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
- ASTM-D1337 - Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
- ASTM-D1338 - Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
- ASTM-D1382 - Method of Test for Susceptibility of Dry Adhesive Films to Attack by Roaches (Withdrawn 1991)
- ASTM-D1488 - Standard Test Method for Amylaceous Matter in Adhesives
- ASTM-D1489 - Standard Test Method for Nonvolatile Content of Aqueous Adhesives
- ASTM-D1579 - Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
- ASTM-D1582 - Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
- ASTM-D1583 - Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
- ASTM-D1779 - Standard Specification for Adhesive for Acoustical Materials
- ASTM-D1780 - Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
- ASTM-D1781 - Standard Test Method for Climbing Drum Peel for Adhesives
- ASTM-D1828 - Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
- ASTM-D1874 - Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases (Withdrawn 2021)
- ASTM-D1875 - Standard Test Method for Density of Adhesives in Fluid Form
- ASTM-D1876 - Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
- ASTM-D1879 - Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
- ASTM-D1916 - Standard Test Method for Penetration of Adhesives (Withdrawn 2005)
- ASTM-D1994 - Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives (Withdrawn 2021)
- ASTM-D1995 - Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
- ASTM-D2093 - Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
- ASTM-D2094 - Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
- ASTM-D2095 - Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
- ASTM-D2235 - Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
- ASTM-D2293 - Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
- ASTM-D2294 - Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
- ASTM-D2295 - Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
- ASTM-D2339 - Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
- ASTM-D2556 - Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
- ASTM-D2557 - Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F)
- ASTM-D2651 - Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
- ASTM-D2730 - Method for Sag Flow of Highly Viscous Materials (Withdrawn 1986)
- ASTM-D2739 - Standard Test Method for Volume Resistivity of Conductive Adhesives
- ASTM-D2851 - Standard Specification for Liquid Optical Adhesive
- ASTM-D2855 - Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
- ASTM-D2918 - Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
- ASTM-D2919 - Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM-D2979 - Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine (Withdrawn 2019)
- ASTM-D3110 - Specification for Adhesives Used in Laminate Joints for Nonstructural Glued Lumber Products (Withdrawn 1996)
- ASTM-D3111 - Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test
- ASTM-D3121 - Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
- ASTM-D3122 - Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
- ASTM-D3138 - Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
- ASTM-D3163 - Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
- ASTM-D3164 - Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
- ASTM-D3165 - Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
- ASTM-D3166 - Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
- ASTM-D3167 - Standard Test Method for Floating Roller Peel Resistance of Adhesives
- ASTM-D3236 - Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
- ASTM-D3310 - Standard Test Method for Determining Corrosivity of Adhesive Materials
- ASTM-D3330 - Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
- ASTM-D3359 - Standard Test Methods for Rating Adhesion by Tape Test
- ASTM-D3433 - Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
- ASTM-D3434 - Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
- ASTM-D3482 - Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
- ASTM-D3498 - Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing
- ASTM-D3528 - Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
- ASTM-D3535 - Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
- ASTM-D3611 - Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
- ASTM-D3632 - Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
- ASTM-D3652 - Standard Test Method for Thickness of Pressure-Sensitive Tapes
- ASTM-D3652M - Standard Test Method for Thickness of Pressure-Sensitive and Gummed Tapes [Metric] (Withdrawn 1998)
- ASTM-D3658 - Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM-D3715 - Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
- ASTM-D3747 - Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation (Withdrawn 2016)
- ASTM-D3762 - Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) (Withdrawn 2019)
- ASTM-D3807 - Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
- ASTM-D3808 - Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
- ASTM-D3811 - Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
- ASTM-D3813 - Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
- ASTM-D3816 - Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
- ASTM-D3929 - Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
- ASTM-D3930 - Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
- ASTM-D3931 - Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM-D3932 - Practice for Control of the Application of Structural Fasteners When Attached by Hot Melt Adhesive (Withdrawn 1991)
- ASTM-D3933 - Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
- ASTM-D3983 - Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
- ASTM-D4027 - Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
- ASTM-D4299 - Test Method for Effect of Bacterial Contamination on Performance of Adhesive Preparations and Adhesives Films (Withdrawn 1990)
- ASTM-D4300 - Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
- ASTM-D4317 - Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
- ASTM-D4338 - Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
- ASTM-D4339 - Standard Test Method for Determination of the Odor of Adhesives
- ASTM-D4497 - Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method) (Withdrawn 2021)
- ASTM-D4498 - Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives (Withdrawn 2021)
- ASTM-D4499 - Standard Test Method for Heat Stability of Hot-Melt Adhesives (Withdrawn 2021)
- ASTM-D4500 - Standard Test Method for Determining Grit, Lumps, or Undissolved Matter in Water-Borne Adhesives (Withdrawn 2001)
- ASTM-D4501 - Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
- ASTM-D4502 - Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
- ASTM-D4562 - Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
- ASTM-D4680 - Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
- ASTM-D4688 - Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
- ASTM-D4689 - Standard Specification for Adhesive, Casein-Type
- ASTM-D4690 - Standard Specification for Urea-Formaldehyde Resin Adhesives
- ASTM-D4783 - Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
- ASTM-D4800 - Standard Guide for Classifying and Specifying Adhesives
- ASTM-D4896 - Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
- ASTM-D5040 - Standard Test Methods for Ash Content of Adhesives
- ASTM-D5041 - Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
- ASTM-D5266 - Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
- ASTM-D5267 - Standard Test Method for Determination of Extrudability of Cartridge Adhesives
- ASTM-D5363 - Standard Specification for Anaerobic Single-Component Adhesives (AN)
- ASTM-D5375 - Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
- ASTM-D5486 - Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
- ASTM-D5570 - Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
- ASTM-D5572 - Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
- ASTM-D5574 - Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
- ASTM-D5648 - Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
- ASTM-D5649 - Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
- ASTM-D5651 - Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
- ASTM-D5656 - Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM-D5657 - Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
- ASTM-D5749 - Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
- ASTM-D5750 - Standard Guide for Width and Length of Pressure-Sensitive Tape
- ASTM-D5751 - Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
- ASTM-D5868 - Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
- ASTM-D6004 - Standard Test Method for Determining Adhesive Shear Strength of Resilient Flooring and Carpet Adhesives
- ASTM-D6005 - Standard Test Method for Determining Slump Resistance of Carpet Adhesives (Withdrawn 2017)
- ASTM-D6123 - Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
- ASTM-D6195 - Standard Test Methods for Loop Tack
- ASTM-D6252 - Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
- ASTM-D6295 - Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
- ASTM-D6325 - Standard Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
- ASTM-D6463 - Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
- ASTM-D6465 - Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
- ASTM-D6551 - Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
- ASTM-D6590 - Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
- ASTM-D6753 - Standard Specification for Coal Tar Adhesive
- ASTM-D6788 - Standard Specification for Repositionable Pressure-Sensitive Flags
- ASTM-D6862 - Standard Test Method for 90 Degree Peel Resistance of Adhesives
- ASTM-D7105 - Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
- ASTM-D7149 - Standard Practice for Determining the Freeze Thaw Stability of Adhesives
- ASTM-D7247 - Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
- ASTM-D7374 - Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
- ASTM-D7446 - Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
- ASTM-D7447 - Standard Practice for Symbolizing Adhesive Applications
- ASTM-D7532 - Standard Practice for Determination of Re-tack Ability of Carpet Adhesives
- ASTM-D7616 - Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
- ASTM-D7744 - Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes
- ASTM-D7799 - Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings
- ASTM-D7888 - Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
- ASTM-D7966 - Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
- ASTM-D7998 - Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
- ASTM-D8089 - Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives
- ASTM-D896 - Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
- ASTM-D897 - Standard Test Method for Tensile Properties of Adhesive Bonds
- ASTM-D898 - Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids (Withdrawn 2006)
- ASTM-D899 - Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
- ASTM-D903 - Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
- ASTM-D904 - Standard Practice for Exposure of Adhesive Specimens to Artificial Light
- ASTM-D905 - Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM-D906 - Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
- ASTM-D907 - Standard Terminology of Adhesives
- ASTM-D950 - Standard Test Method for Impact Strength of Adhesive Bonds
- ASTM-E1495 - Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
- ASTM-E1555 - Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
- ASTM-E1794 - Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200 °F Elevated Humidity Service), Type II Panels
- ASTM-E1800 - Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160 °F Elevated Humidity Service), Type I Panels
- ASTM-E1801 - Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
- ASTM-E2004 - Standard Test Method for Facing Cleavage of Sandwich Panels
- ASTM-E229 - Standard Test Method for Shear Strength and Shear Modulus of Structural Adhesives (Withdrawn 2003)
- ASTM-E865 - Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
- ASTM-E866 - Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
- ASTM-E874 - Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
- ASTM-E990 - Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
- ASTM-F2029 - Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength
- ASTM-F2255 - Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
- ASTM-F2256 - Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
- ASTM-F2258 - Standard Test Method for Strength Properties of Tissue Adhesives in Tension
- ASTM-F3328 - Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
BSI:
- BS-1203 - Hot-setting phenolic and aminoplastic wood adhesives. Classification and test method
- BS-1204 - Specification for Type Mr Phenolic and Aminoplastic Syntheticresin Adhesives for Wood
- BS-1204-1 - Synthetic resin adhesives (phenolic and aminoplastic) for wood. Specification for gap-filling adhesives
- BS-1204-2 - Synthetic resin adhesives (phenolic and aminoplastic) for wood. Specification for close-contact adhesives
- BS-3046 - Specification for adhesives for hanging flexible wallcoverings
- BS-3544 - Methods of Test for Polyvinyl Acetate Adhesives for Wood
- BS-4071 - Specification for Polyvinyl Acetate (Pva) Emulsion Adhesives for Wood
- BS-5350-B1 - Determination of Density, Methods of Test for Adhesives
- BS-5350-B2 - Determination of Solids Content
- BS-5350-B8 - Methods of test for adhesives. Adhesives
- BS-5350-C5 - Methods of test for adhesives
- BS-5350-C6 - Methods of test for adhesives. Adhesively bonded joints: mechanical tests
- BS-5350-E2 - Methods of test for adhesives. Sampling and analysis of test data
- BS-5350-F1 - Methods of test for adhesives. Tests for flooring adhesives. Performance tests for flooring adhesives
- BS-5350-G2 - Methods of test for adhesives. Tests on anaerobic adhesives
- BS-5442-1 - Classification of Adhesives for Use With Flooring Materials
- BS-5442-2 - Classification of Adhesives for Use With Interior Wall & Ceiling Coverings (Excluding
- BS-6138 - Glossary of terms used in the adhesives industry
- BS-7116 - Specification for double sided pressure sensitive adhesive tapes
- BS-7969 - Adhesives. Ethyl and methyl cyanoacrylate types 1,2 and 3
- BS-7991 - Determination of the mode I adhesive fracture energy, GIC, of structural adhesives using the double cantilever beam (DCB) and tapered double cantilever beam (TDCB) specimens
- BS-EN-1067 - Adhesives. Examination and preparation of samples for testing
- BS-EN-12002 - Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts
- BS-EN-12003 - Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives
- BS-EN-12004 - Adhesives for tiles. Requirements, evaluation of conformity, classification and designation
- BS-EN-12004-1-TC - Tracked Changes. Adhesives for ceramic tiles
- BS-EN-12004-2 - Adhesives for ceramic tiles
- BS-EN-12092 - Adhesives. Determination of viscosity
- BS-EN-1238 - Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball)
- BS-EN-1242 - Adhesives. Determination of isocyanate content
- BS-EN-12436 - Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements
- BS-EN-12702 - Adhesives for paper and board, packaging and disposable sanitary products. Determination of blocking behaviour of potentially adhesive layers
- BS-EN-12703 - Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature
- BS-EN-12704 - Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives
- BS-EN-12705 - Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration
- BS-EN-12706 - Adhesives. Test methods for hydraulic setting floor smoothing and/or levelling compounds. Determinatiion of flow characteristics
- BS-EN-12765 - Classification of thermosetting wood adhesives for non-structural applications
- BS-EN-12765-TC - Tracked Changes. Classification of thermosetting wood adhesives for non-structural applications
- BS-EN-12808-1 - Grouts for tiles
- BS-EN-12808-4 - Grouts for tiles
- BS-EN-12960 - Adhesives for paper and board, packaging and disposable sanitary products. Determination of shear resistance
- BS-EN-12961 - Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives
- BS-EN-12962 - Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index)
- BS-EN-12963 - Adhesives. Determination of free monomer content in adhesives based on synthetic polymers
- BS-EN-1308 - Adhesives for tiles. Determination of slip
- BS-EN-1322 - Adhesives for tiles. Definitions and terminology
- BS-EN-1323 - Adhesives for tiles. Concrete slabs for tests
- BS-EN-1324 - Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives
- BS-EN-13415 - Test of adhesives for floor covering. Determination of the electrical resistance of adhesive films and composites
- BS-EN-1346 - Adhesives for tiles. Determination of open time
- BS-EN-1347 - Adhesives for tiles. Determination of wetting capability
- BS-EN-1348 - Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives
- BS-EN-1372 - Adhesives. Test method for adhesives for floor and wall coverings. Peel test
- BS-EN-1373 - Adhesives. Test method for adhesives for floor and wall coverings. Shear test
- BS-EN-1391 - Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification
- BS-EN-1392 - Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions
- BS-EN-13999-1 - Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application
- BS-EN-13999-2 - Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application
- BS-EN-13999-3 - Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application
- BS-EN-13999-4 - Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application
- BS-EN-14022 - Structural adhesives. Determination of the pot life (working life) of multicomponent adhesives
- BS-EN-14173 - Structural adhesives. T-peel test for flexible-to-flexible bonded assemblies
- BS-EN-14256 - Adhesives for non-structural wood applications. Test method and requirements for resistance to static load
- BS-EN-14257 - Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- BS-EN-14258 - Structural adhesives. Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
- BS-EN-14292 - Adhesives. Wood adhesives. Determination of static load resistance with increasing temperature
- BS-EN-14293 - Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements
- BS-EN-14294 - Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes
- BS-EN-14410 - Self adhesive tapes. Measurement of breaking strength and elongation at break
- BS-EN-14444 - Structural adhesives. Qualitative assessment of durability of bonded assemblies. Wedge rupture test
- BS-EN-14493 - Structural adhesives. Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions. Wedge impact method
- BS-EN-14510 - Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack)
- BS-EN-1464 - Adhesives. Determination of peel resistance of adhesive bonds. Floating roller method
- BS-EN-1465 - Adhesives. Determination of tensile lap-shear strength of bonded assemblies
- BS-EN-14680 - Adhesives for non-pressure thermoplastics piping systems. Specifications
- BS-EN-14680-TC - Tracked Changes. Adhesives for non-pressure thermoplastics piping systems. Specifications
- BS-EN-14713 - Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding
- BS-EN-14713-TC - Tracked Changes. Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding
- BS-EN-14814 - Adhesives for thermoplastic piping systems for fluids under pressure. Specifications
- BS-EN-14814-TC - Tracked Changes. Adhesives for thermoplastic piping systems for fluids under pressure. Specifications
- BS-EN-14869-1 - Structural adhesives. Determination of shear behaviour of structural bonds
- BS-EN-14869-2 - Structural adhesives. Determination of shear behaviour of structural bonds
- BS-EN-15062 - Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions
- BS-EN-15190 - Structural adhesives. Test methods for assessing long term durability of bonded metallic structures
- BS-EN-15274 - General purpose adhesives for structural assembly. Requirements and test methods
- BS-EN-15275 - Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
- BS-EN-15307 - Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements
- BS-EN-15336 - Adhesives. Determination of the time to rupture of bonded joints under static load
- BS-EN-15337 - Adhesives. Determination of shear of anaerobic adhesives using pin-and-collar specimens
- BS-EN-15416-1 - Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods
- BS-EN-15416-2 - Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Static load test of multiple bondline specimens in compression shear
- BS-EN-15416-3 - Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods
- BS-EN-15416-4 - Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods
- BS-EN-15416-4-TC - Tracked Changes. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods
- BS-EN-15416-5 - Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods
- BS-EN-15416-5-TC - Tracked Changes. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods
- BS-EN-15425 - Adhesives. One component polyurethane (PUR) for load-bearing timber structures. Classification and performance requirements
- BS-EN-15425-TC - Tracked Changes. Adhesives. One component polyurethane (PUR) for load-bearing timber structures. Classification and performance requirements
- BS-EN-15865 - Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
- BS-EN-15870 - Adhesives. Determination of tensile strength of butt joints
- BS-EN-16254 - Adhesives. Emulsion polymer isocyanate (EPI) for load-bearing timber structures. Classification and performance requirements
- BS-EN-16556 - Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications
- BS-EN-17224 - Determination of compressive shear strength of wood adhesives at elevated temperatures
- BS-EN-17333-1 - Characterisation of one component foam
- BS-EN-17333-2 - Characterisation of one component foam
- BS-EN-17333-3 - Characterisation of one component foam
- BS-EN-17333-5 - Characterisation of one component foam
- BS-EN-17408 - Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
- BS-EN-17460 - Railway applications. Adhesive bonding of rail vehicles and their components
- BS-EN-17618 - Adhesives. Wood-to-wood adhesive bonds for non-structural applications. Determination of shear strength by compressive loading
- BS-EN-17619 - Classification of wood adhesives for non-structural timber products for exterior use
- BS-EN-17668 - Adhesives for floor coverings. Preparation of adhesive application. Test methods for the determination of corresponding humidity of mineral substrates
- BS-EN-1895 - Adhesives for paper and board, packaging and disposable sanitary products. 180. 'T' peel test for a flexible-to-flexible assembly
- BS-EN-1896 - Adhesives for paper and board, packaging and disposable sanitary products. Determination of tensile strength and elongation
- BS-EN-1902 - Adhesives. Test method for adhesives for floor and wall coverings. Shear creep test
- BS-EN-1903 - Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing
- BS-EN-1942 - Self adhesive tapes. Measurement of thickness
- BS-EN-1943 - Self adhesive tapes. Measurement of static shear adhesion
- BS-EN-1966 - Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
- BS-EN-1967 - Structural Adhesives, Evaluation of the Effectiveness of Surface Treatment Techniques
- BS-EN-204 - Classification of thermoplastic wood adhesives for non-structural applications
- BS-EN-205 - Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints
- BS-EN-205-TC - Tracked Changes. Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints
- BS-EN-26922 - Adhesives, Determination of Tensile Strength of Butt Joints
- BS-EN-28510-1 - Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly
- BS-EN-28510-2 - Adhesives, Peel Test for a Flexible-Bonded-To-Rigid Test Specimen Assembly, 180 Degree
- BS-EN-301 - Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
- BS-EN-301-TC - Tracked Changes. Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
- BS-EN-302-1 - Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-1-TC - Tracked Changes. Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-2 - Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-2-TC - Tracked Changes. Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-3 - Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-3-TC - Tracked Changes. Adhesives for load-bearing timber structures - Test methods
- BS-EN-302-4 - Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-4-TC - Tracked Changes. Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-5 - Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-5-TC - Tracked Changes. Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-6 - Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-6-TC - Tracked Changes. Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-7 - Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-7-TC - Tracked Changes. Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-8 - Adhesives for load-bearing timber structures. Test methods
- BS-EN-302-8-TC - Tracked Changes. Adhesives for load-bearing timber structures. Test methods
- BS-EN-522 - Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification
- BS-EN-542 - Adhesives. Determination of density
- BS-EN-543 - Adhesives. Determination of apparent density of powder and granule adhesives
- BS-EN-827 - Adhesives. Determination of conventional solids content and constant mass solids content
- BS-EN-828 - Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface
- BS-EN-923 - Adhesives. Terms and definitions
- BS-EN-924 - Adhesives. Solvent-borne and solvent-free adhesives. Determination of flashpoint
- BS-EN-ISO-10123 - Adhesives. Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
- BS-EN-ISO-10364 - Structural adhesives. Determination of the pot life (working life) of multi-component adhesives
- BS-EN-ISO-10364-TC - Tracked Changes. Structural adhesives. Determination of the pot life (working life) of multi-component adhesives
- BS-EN-ISO-10365-TC - Tracked Changes. Adhesives. Designation of main failure patterns
- BS-EN-ISO-10964 - Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
- BS-EN-ISO-11339 - Adhesives. T-peel test for flexible-to-flexible bonded assemblies
- BS-EN-ISO-11343 - Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions. Wedge impact method
- BS-EN-ISO-13445 - Adhesives. Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
- BS-EN-ISO-14678 - Adhesives. Determination of resistance to flow (sagging)
- BS-EN-ISO-15605 - Adhesives. Sampling
- BS-EN-ISO-15908 - Adhesives for thermoplastic piping systems. Test method for the determination of thermal stability of adhesives
- BS-EN-ISO-21368 - Adhesives. Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
- BS-EN-ISO-22631 - Adhesives. Test method for adhesives for floor and wall coverings. Peel test
- BS-EN-ISO-22632 - Adhesives. Test method for adhesives for floor and wall coverings. Shear test
- BS-EN-ISO-22633 - Adhesives. Test methods for adhesives for floor coverings and wall coverings. Determination of dimensional changes of a linoleum floor covering in contact with an adhesive
- BS-EN-ISO-22635 - Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing
- BS-EN-ISO-22636 - Adhesives. Adhesives for floor coverings. Requirements for mechanical and electrical performance
- BS-EN-ISO-22637 - Adhesives. Test of adhesive for floor covering. Determination of the electrical resistance of adhesive films and composites
- BS-EN-ISO-29862 - Self adhesive tapes. Determination of peel adhesion properties
- BS-EN-ISO-29863 - Self adhesive tapes. Measurement of static shear adhesion
- BS-EN-ISO-29864 - Self adhesive tapes. Measurement of breaking strength and elongation at break
- BS-EN-ISO-6076 - Adhesives. Installation of floor coverings, wood flooring, levelling compounds and tiles. Specification of trowel notch sizes
- BS-EN-ISO-9142 - Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- BS-EN-ISO-9311-1 - Adhesives for thermoplastics piping systems
- BS-EN-ISO-9311-2 - Adhesives for thermoplastic piping systems
- BS-EN-ISO-9311-3 - Adhesives for thermoplastic piping systems
- BS-EN-ISO-9653 - Adhesives. Test method for shear strength of adhesive bonds
- BS-EN-ISO-9665 - Adhesives. Animal glues. Methods of sampling and testing (ISO 9665:1998)
- BS-ISO-11003-1 - Adhesives. Determination of shear behaviour of structural adhesives
- BS-ISO-11003-2 - Adhesives. Determination of shear behaviour of structural adhesives
- BS-ISO-13007-2 - Ceramic tiles. Grouts and adhesives
- BS-ISO-14448 - Low modulus adhesives for exterior tile finishing
- BS-ISO-15166-1 - Adhesives. Methods of preparing bulk specimens
- BS-ISO-15166-2 - Adhesives. Methods of preparing bulk specimens
- BS-ISO-15509 - Adhesives. Determination of the bond strength of engineering-plastic joints
- BS-ISO-16525-1 - Adhesives. Test methods for isotropic electrically conductive adhesives
- BS-ISO-16525-2 - Adhesives. Test methods for isotropic electrically conductive adhesives
- BS-ISO-16525-3 - Adhesives. Test methods for isotropic electrically conductive adhesives
- BS-ISO-16525-4 - Adhesives. Test methods for isotropic electrically conductive adhesives
- BS-ISO-16525-5 - Adhesives. Test methods for isotropic electrically conductive adhesives
- BS-ISO-16525-6 - Adhesives. Test methods for isotropic electrically conductive adhesives
- BS-ISO-16525-7 - Adhesives. Test methods for isotropic electrically conductive adhesives
- BS-ISO-16525-8 - Adhesives. Test methods for isotropic electrically conductive adhesives
- BS-ISO-16525-9 - Adhesives. Test methods for isotropic electrically conductive adhesives
- BS-ISO-17087 - Specifications for adhesives used for finger joints in non-structural lumber products
- BS-ISO-17178 - Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements
- BS-ISO-17194 - Structural adhesives. Standard database of properties
- BS-ISO-17194-TC - Tracked Changes. Structural adhesives. Standard database of properties
- BS-ISO-19095-1 - Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies
- BS-ISO-19095-2 - Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies
- BS-ISO-19095-3 - Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies
- BS-ISO-19095-4 - Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies
- BS-ISO-19095-5 - Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies
- BS-ISO-19095-6 - Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies
- BS-ISO-19209 - Adhesives. Classification of thermoplastic wood adhesives for non-structural applications
- BS-ISO-19210 - Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints
- BS-ISO-19212 - Adhesives. Determination of temperature dependence of shear strength
- BS-ISO-21194 - Elastic adhesives. Testing of adhesively bonded joints. Bead peel test
- BS-ISO-21368 - Adhesives. Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
- BS-ISO-21368-TC - Tracked Changes. Adhesives. Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
- BS-ISO-21760-1 - Adhesives for organic electronic devices. Determination of water vapour transmission rate
- BS-ISO-25179 - Adhesives. Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
- BS-ISO-25179-TC - Tracked Changes. Adhesives. Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
- BS-ISO-25217 - Adhesives. Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens
- BS-ISO-26842-1 - Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products
- BS-ISO-26842-2 - Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products
- BS-ISO-29862 - Self adhesive tapes. Determination of peel adhesion properties
- BS-ISO-29863 - Self adhesive tapes. Measurement of static shear adhesion
- BS-ISO-29864 - Self adhesive tapes. Measurement of breaking strength and elongation at break
- BS-ISO-5684 - Adhesives. Floor covering adhesives and products for flooring installation. Assessment and classification of low volatile organic compound (VOC) products
- BS-ISO-6237 - Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by tensile loading
- BS-ISO-6237-TC - Tracked Changes. Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by tensile loading
- BS-ISO-6238 - Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by compressive loading
- BS-ISO-7972 - Adhesives. Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding
- DD-ENV-13999-1 - Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application
- DD-ENV-13999-2 - Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application
- DD-ENV-13999-3 - Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application
- DD-ENV-13999-4 - Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application
- DD-ENV-302-5 - Adhesives for load-bearing timber structures. Test tethods
- PD-CEN-14548 - Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
- PD-CEN-14999 - Adhesives for thermoplastic piping systems. Accelerated ageing test in storage container
- PD-CEN-15990 - Data sheets. Footwear tests materials and test adhesives
ISO:
- ISO-10123 - Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
- ISO-10354 - Adhesives -- Characterization of durability of structural-adhesive-bonded assemblies -- Wedge rupture test
- ISO-10363 - Hot-melt adhesives -- Determination of thermal stability
- ISO-10364 - Structural adhesives - Determination of the pot life (working life) of multi-component adhesives
- ISO-10365 - Adhesives - Designation of main failure patterns
- ISO-10964 - Adhesives -- Determination of torque strength of anaerobic adhesives on threaded fasteners
- ISO-11003-1 - Adhesives - Determination of shear behaviour of structural adhesives - Part 1: Torsion test method using butt-bonded hollow cylinders
- ISO-11003-2 - Adhesives - Determination of shear behaviour of structural adhesives - Part 2: Tensile test method using thick adherends
- ISO-11339 - Adhesives - T-peel test for flexible-to-flexible bonded assemblies
- ISO-11343 - Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method
- ISO-13007-1 - Ceramic tiles - Grouts and adhesives - Part 1: Terms, definitions and specifications for adhesives
- ISO-13007-2 - Ceramic tiles - Grouts and adhesives - Part 2: Test methods for adhesives
- ISO-13445 - Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
- ISO-14448 - Low modulus adhesives for exterior tile finishing
- ISO-14615 - Adhesives -- Durability of structural adhesive joints -- Exposure to humidity and temperature under load
- ISO-14676 - Adhesives -- Evaluation of the effectiveness of surface treatment techniques for aluminium -- Wet-peel test by floating-roller method
- ISO-14678 - Adhesives - Determination of resistance to flow (sagging)
- ISO-14679 - Adhesives -- Measurement of adhesion characteristics by a three-point bending method
- ISO-15107 - Adhesives -- Determination of cleavage strength of bonded joints
- ISO-15108 - Adhesives -- Determination of strength of bonded joints using a bending-shear method
- ISO-15109 - Adhesives -- Determination of the time to rupture of bonded joints under static load
- ISO-15166-1 - Adhesives -- Methods of preparing bulk specimens -- Part 1: Two-part systems
- ISO-15166-2 - Adhesives -- Methods of preparing bulk specimens -- Part 2: Elevated-temperature-curing one-part systems
- ISO-15509 - Adhesives - Determination of the bond strength of engineering-plastic joints
- ISO-15605 - Adhesives -- Sampling
- ISO-15908 - Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
- ISO-16525-1 - Adhesives - Test methods for isotropic electrically conductive adhesives - Part 1: General test methods
- ISO-16525-2 - Adhesives - Test methods for isotropic electrically conductive adhesives - Part 2: Determination of electrical characteristics for use in electronic assemblies
- ISO-16525-3 - Adhesives - Test methods for isotropic electrically conductive adhesives - Part 3: Determination of heat-transfer properties
- ISO-16525-4 - Adhesives - Test methods for isotropic electrically conductive adhesives - Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
- ISO-16525-5 - Adhesives - Test methods for isotropic electrically conductive adhesives - Part 5: Determination of shear fatigue
- ISO-16525-6 - Adhesives - Test methods for isotropic electrically conductive adhesives - Part 6: Determination of pendulum-type shear impact
- ISO-16525-7 - Adhesives - Test methods for isotropic electrically conductive adhesives - Part 7: Environmental test methods
- ISO-16525-8 - Adhesives - Test methods for isotropic electrically conductive adhesives - Part 8: Electrochemical-migration test methods
- ISO-16525-9 - Adhesives - Test methods for isotropic electrically conductive adhesives - Part 9: Determination of high-speed signal-transmission characteristics
- ISO-17087 - Specifications for adhesives used for finger joints in non-structural lumber products
- ISO-17178 - Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements
- ISO-17194 - Structural adhesives - Standard database of properties
- ISO-17212 - Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
- ISO-19095-1 - Plastics - Evaluation of the adhesion interface performance in plastic-metal assemblies - Part 1: Guidelines for the approach
- ISO-19095-2 - Plastics - Evaluation of the adhesion interface performance in plastic-metal assemblies - Part 2: Test specimens
- ISO-19095-3 - Plastics - Evaluation of the adhesion interface performance in plastic-metal assemblies - Part 3: Test methods
- ISO-19095-4 - Plastics - Evaluation of the adhesion interface performance in plastic-metal assemblies - Part 4: Environmental conditions for durability
- ISO-19095-5 - Plastics - Evaluation of the adhesion interface performance in plastic-metal assemblies - Part 5: Fracture energy
- ISO-19095-6 - Plastics - Evaluation of the adhesion interface performance in plastic-metal assemblies - Part 6: Accelerated degradation test
- ISO-19209 - Adhesives - Classification of thermoplastic wood adhesives for non-structural applications
- ISO-19210 - Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints
- ISO-19212 - Adhesives - Determination of temperature dependence of shear strength
- ISO-21194 - Elastic adhesives - Testing of adhesively bonded joints - Bead peel test
- ISO-21368 - Adhesives - Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
- ISO-21760-1 - Adhesives for organic electronic devices - Determination of water vapour transmission rate - Part 1: Adhesive film preparation methods
- ISO-21760-2 - Adhesives for organic electronic devices - Determination of water vapour transmission rate - Part 2: Edge seal methods
- ISO-22631 - Adhesives - Test methods for adhesives for floor and wall coverings - Peel test
- ISO-22632 - Adhesives - Test methods for adhesives for floor and wall coverings - Shear test
- ISO-22633 - Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of the dimensional changes of a linoleum floor covering in contact with an adhesive
- ISO-22635 - Adhesives - Test methods for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
- ISO-22636 - Adhesives - Adhesives for floor coverings - Requirements for mechanical and electrical performance
- ISO-22637 - Adhesives - Test of adhesive for floor covering - Determination of the electrical resistance of adhesive films and composites
- ISO-24564 - Space systems - Adhesives - General requirements
- ISO-25179 - Adhesives - Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
- ISO-25217 - Adhesives - Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens
- ISO-26842-1 - Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 1: Resistance to delamination in non-severe environments
- ISO-26842-2 - Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 2: Resistance to delamination in severe environments
- ISO-29862 - Self adhesive tapes - Determination of peel adhesion properties
- ISO-29863 - Self adhesive tapes - Measurement of static shear adhesion
- ISO-29864 - Self adhesive tapes - Measurement of breaking strength and elongation at break
- ISO-34256 - Adhesives for non-structural wood applications - Test method and requirements for resistance to static load
- ISO-34257 - Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT 91)
- ISO-4578 - Adhesives -- Determination of peel resistance of high-strength adhesive bonds -- Floating-roller method
- ISO-4587 - Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
- ISO-5684 - Adhesives - Floor covering adhesives and products for flooring installation - Assessment and classification of low volatile organic compound (VOC) products
- ISO-6076 - Adhesives - Installation of floor coverings, wood flooring, levelling compounds and tiles - Specification of trowel notch sizes
- ISO-6237 - Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by tensile loading
- ISO-6238 - Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading
- ISO-7387-1 - Adhesives with solvents for assembly of PVC-U pipe elements -- Characterization -- Part 1: Basic test methods
- ISO-7972 - Adhesives - Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding
- ISO-8510-2 - Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel
- ISO-9142 - Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- ISO-9311-1 - Adhesives for thermoplastic piping systems - Part 1: Determination of film properties
- ISO-9311-2 - Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength
- ISO-9311-3 - Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure
- ISO-9653 - Adhesives -- Test method for shear impact strength of adhesive bonds
- ISO-9664 - Adhesives -- Test methods for fatigue properties of structural adhesives in tensile shear
- ISO-9665 - Adhesives -- Animal glues -- Methods of sampling and testing
Other SDOs:
- DIN-EN-1067 - Adhesives - Examination & Preparation of Samples for Testing
- DIN-EN-12004 - Adhesives for tiles - Requirements, evaluation of conformity, classification and designation; German version EN 12004:2007+A1:2012
- DIN-EN-1242 - Adhesives - Determination of isocyanate content; German version EN 1242:2013
- DIN-EN-12860 - Gypsum-Based Adhesives for Gypsum Blocks - Definitions, Requirements & Test Methods, E
- DIN-EN-13415 - Test of Adhesive for Floor Covering - Determination of the Electrical Resistance of Ad
- DIN-EN-1392 - Adhesives for Leather & Footwear Materials - Solvent-Based & Dispersion Adhesives - Te
- DIN-EN-13999-1 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure; German version EN 13999-1:2013
- DIN-EN-13999-3 - Part 3: Determination of Volatile Aldehydes, Adhesives - Short Term Method for Measuri
- DIN-EN-13999-4 - Part 4: Determination of Volatile Diisocyanates, Adhesives - Short Term Method for Mea
- DIN-EN-14022 - Structural Adhesives - Determination of the Pot Life (Working Life) of Multicomponent
- DIN-EN-14173 - Structural Adhesives, T-Peel Test for Flexible-To-Flexible Bonded Assemblies (ISO 1133
- DIN-EN-14257 - Adhesives - Wood Adhesives - Determination of Tensile Strength of Lap Joints at Elevat
- DIN-EN-14258 - Structural Adhesives, Mechanical Behaviour of Bonded Joints Subjected To Short & Long
- DIN-EN-14292 - Adhesives, Wood Adhesives, Determination of Static Load Resistance With Increasing Tem
- DIN-EN-14293 - Adhesives - Adhesives for Bonding Parquet To Subfloor - Test Methods & Minimum Require
- DIN-EN-14294 - Adhesives for Leather & Footwear Materials - Preparation of Bonded Test Pieces by Mou
- DIN-EN-14444 - Structural Adhesives - Qualitative Assessment of Durability of Bonded Assemblies - We
- DIN-EN-14493 - Structural Adhesives, Determination of Dynamic Resistance To Cleavage of High Strength
- DIN-EN-14510 - Adhesives for Leather & Footwear Materials, Solvent-Based & Dispersion Adhesives, Det
- DIN-EN-14680 - Adhesives for non-pressure thermoplastic piping systems - Specifications; German version EN 14680:2015
- DIN-EN-14713 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding; German version EN 14713:2016
- DIN-EN-14814 - Adhesives for thermoplastic piping systems for fluids under pressure - Specifications; German version EN 14814:2016
- DIN-EN-14869-1 - Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders
- DIN-EN-14869-2 - Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
- DIN-EN-15062 - Adhesives for Leather & Footwear Materials - Solvent-Based & Dispersion Adhesives - Te
- DIN-EN-15336 - Adhesives - Determination of the Time To Rupture of Bonded Joints Under Static Load
- DIN-EN-15416-4 - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions; German version EN 15416-4:2017
- DIN-EN-15416-5 - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions; German version EN 15416-5:2017
- DIN-EN-1942 - Self Adhesive Tapes - Measurement of Thickness
- DIN-EN-1965-1 - Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
- DIN-EN-1965-2 - Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate
- DIN-EN-1966 - Structural Adhesives - Characterization of a Surface by Measuring Adhesion by Means Of
- DIN-EN-205 - Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints; German version EN 205:2016
- DIN-EN-301 - Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements; German version EN 301:2013
- DIN-EN-302-1 - Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength; German version EN 302-1:2013
- DIN-EN-302-2 - Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination; German version EN 302-2:2013
- DIN-EN-302-3 - Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength; German version EN 302-3:2013
- DIN-EN-302-4 - Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength; German version EN 302-4:2013
- DIN-EN-302-6 - Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions; German version EN 302-6:2013
- DIN-EN-302-7 - Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions; German version EN 302-7:2013
- DIN-EN-827 - Adhesives - Determination of Conventional Solids Content & Constant Mass Solids Conten
- DIN-EN-923 - Adhesives - Terms and definitions
- DIN-EN-ISO-11339 - Adhesives - T-Peel Test for Flexible-To-Flexible Bonded Assemblies
- DIN-EN-ISO-11343 - Adhesives, Determination of Dynamic Resistance To Cleavage of High-Strength Adhesive B
- DIN-EN-ISO-13445 - Adhesives - Determination of Shear Strength of Adhesive Bonds Between Rigid Substrates
- DIN-EN-ISO-14678 - Adhesives, Determination of Resistance To Flow (Saggin)
- DIN-EN-ISO-15605 - Adhesives, Sampling
- DIN-EN-ISO-9142 - Adhesives, Guide To the Selection of Standard Laboratory Ageing Conditions for Testing
- DIN-EN-ISO-9311-1 - Part 1: Determination of Film Properties, Adhesives for Thermoplastic Piping Systems
- DIN-EN-ISO-9311-2 - Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength
- DIN-EN-ISO-9311-3 - Part 3: Test Method for the Determination of Resistance To Internal Pressure, Adhesive
- EN-1067 - Adhesives, Examination & Preparation of Samples for Testing
- EN-12002 - Adhesives for Tiles, Determination of Transverse Deformation for Cementitious Adhesive
- EN-12003 - Adhesives for Tiles - Determination of Shear Adhesion Strength of Rection Resin Adhesi
- EN-12004 - Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
- EN-12004-1 - Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
- EN-12004-2 - Adhesives for ceramic tiles - Part 2: Test methods
- EN-1238 - Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball)
- EN-1239 - Adhesives - Freeze-thaw stability
- EN-1240 - Adhesives - Determination of hydroxyl value and/or hydroxyl content
- EN-1242 - Adhesives - Determination of isocyanate content
- EN-1243 - Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates
- EN-1245 - Adhesives - Determination of pH
- EN-12703 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
- EN-12704 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives
- EN-12705 - Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration
- EN-12765 - Classification of thermosetting wood adhesives for non-structural applications
- EN-12808-4 - Part 4: Determination of Shrinkage, Grouts for Tiles
- EN-12962 - Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index)
- EN-1308 - Adhesives for Tiles - Determination of Slip
- EN-1323 - Adhesives for Tiles - Concrete Slabs for Tests
- EN-1324 - Adhesives for Tiles, Determination of Shear Adhesion Strength of Dispersion Adhesives
- EN-13415 - Test of Adhesive for Floor Covering - Determination of the Electrical Resistance of Ad
- EN-1346 - Adhesives for Tiles, Determination of Open Time
- EN-1347 - Adhesives for Tiles, Determination of Wetting Capability
- EN-1348 - Adhesives for Tiles, Determination of Tensile Adhesion Strength for Cementitious Adhes
- EN-1372 - Adhesives - Test method for adhesives for floor and wall coverings - Peel test
- EN-1373 - Adhesives - Test method for adhesives for floor and wall coverings - Shear test
- EN-1392 - Adhesives for Leather & Footwear Materials - Solvent-Based & Dispersion Adhesives - Te
- EN-13999-1 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure
- EN-13999-2 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds
- EN-13999-3 - Part 3: Determination of Volatile Aldehydes, Adhesives - Short Term Method for Measuri
- EN-13999-4 - Part 4: Determination of Volatile Diisocyanates, Adhesives - Short Term Method for Mea
- EN-14022 - Structural Adhesives - Determination of the Pot Life (Working Life) of Multicomponent
- EN-14173 - Structural Adhesives - T-Peel Test for Flexible-To-Flexible Bonded Assemblies
- EN-14256 - Adhesives for Non-Structural Wood Applications, Test Method & Requirements for Resist
- EN-14257 - Adhesives - Wood Adhesives - Determination of Tensile Strength of Lap Joints at Elevat
- EN-14292 - Adhesives, Wood Adhesives, Determination of Static Load Resistance With Increasing Tem
- EN-14293 - Adhesives - Adhesives for Bonding Parquet To Subfloor - Test Methods & Minimum Require
- EN-14294 - Adhesives for Leather & Footwear Materials - Preparation of Bonded Test Pieces by Mou
- EN-1444 - Fibre-Cement Pipelines, Guide for Laying & On-Site Work Practices
- EN-14444 - Structural Adhesives - Qualitative Assessment of Durability of Bonded Assemblies - We
- EN-14493 - Structural Adhesives, Determination of Dynamic Resistance To Cleavage of High Strength
- EN-14510 - Adhesives for Leather & Footwear Materials, Solvent-Based & Dispersion Adhesives, Det
- EN-1464 - Adhesives - Determination of Peel Resistance of Adhesive Bonds - Floating Roller Metho
- EN-1465 - Adhesives - Determination of Tensile Lap-Shear Strength of Bonded Assemblies
- EN-14680 - Adhesives for non-pressure thermoplastics piping systems - Specifications
- EN-14713 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding
- EN-14814 - Adhesives for thermoplastic piping systems for fluids under pressure - Specifications
- EN-14869-1 - Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders
- EN-14869-2 - Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test
- EN-15062 - Adhesives for Leather & Footwear Materials - Solvent-Based & Dispersion Adhesives - Te
- EN-15190 - Structural Adhesives, Test Methods for Assessing Long Term Durability of Bonded Metall
- EN-15274 - General purpose adhesives for structural assembly - Requirements and test methods
- EN-15275 - Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
- EN-15307 - Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
- EN-15336 - Adhesives - Determination of the Time To Rupture of Bonded Joints Under Static Load
- EN-15337 - Adhesives - Determination of Shear Strength of Anaerobic Adhesives Using Pin-&-Collar
- EN-15416-1 - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test)
- EN-15416-2 - Adhesives for Load Bearing Timber Structures Other Than Phenolic & Aminoplastic, Test
- EN-15416-3 - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
- EN-15416-4 - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions
- EN-15416-5 - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions
- EN-15425 - Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
- EN-15865 - Adhesives - Determination of Torque Strength of Anaerobic Adhesives on Threaded Fasten
- EN-15870 - Adhesives - Determination of Tensile Strength of Butt Joints
- EN-16254 - Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements
- EN-16556 - Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications
- EN-17224 - Determination of compressive shear strength of wood adhesives at elevated temperatures
- EN-1895 - Adhesives for Paper & Board, Packaging & Disposable Sanitary Products, 180 Degrees, 'T
- EN-1902 - Adhesives - Test mthod for adhesives for floor and wall coverings - Shear creep test
- EN-1903 - Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
- EN-1942 - Self Adhesive Tapes - Measurement of Thickness
- EN-1965-1 - Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
- EN-1965-2 - Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate
- EN-1966 - Structural Adhesives - Characterization of a Surface by Measuring Adhesion by Means Of
- EN-204 - Classification of thermoplastic wood adhesives for non-structural applications
- EN-205 - Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints
- EN-28510-1 - Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90-¦ peel
- EN-301 - Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
- EN-302-1 - Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
- EN-302-2 - Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
- EN-302-3 - Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
- EN-302-4 - Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
- EN-302-5 - Adhesives for load-bearing structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
- EN-302-6 - Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
- EN-302-7 - Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
- EN-302-8 - Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear
- EN-542 - Adhesives, Determination of Density
- EN-543 - Adhesives, Determination of Apparent Density of Powder & Granule Adhesives
- EN-827 - Adhesives, Determination of Conventional Solids Content & Constant Mass Solids Content
- EN-828 - Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
- EN-923 - Adhesives - Terms and definitions
- EN-ISO-10123 - Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013)
- EN-ISO-10364 - Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015)
- EN-ISO-10964 - Adhesives, Determination of Torque Strength of Anaerobic Adhesives on Threaded Fastene
- EN-ISO-11339 - Adhesives - T-Peel Test for Flexible-To-Flexible Bonded Assemblies
- EN-ISO-11343 - Adhesives, Determination of Dynamic Resistance To Cleavage of High-Strength Adhesive B
- EN-ISO-13445 - Adhesives - Determination of Shear Strength of Adhesive Bonds Between Rigid Substrates
- EN-ISO-14678 - Adhesives, Determination of Resistance To Flow (Sagging)
- EN-ISO-15605 - Adhesives - Sampling (ISO 15605:2000)
- EN-ISO-22631 - Adhesives - Test method for adhesives for floor and wall coverings - Peel test (ISO 22631:2019)
- EN-ISO-22632 - Adhesives - Test method for adhesives for floor and wall coverings - Shear test (ISO 22632:2019)
- EN-ISO-22635 - Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing (ISO 22635:2019)
- EN-ISO-22637 - Adhesives - Test of adhesive for floor covering - Determination of the electrical resistance of adhesive films and composites (ISO 22637:2019)
- EN-ISO-29862 - Self adhesive tapes - Determination of peel adhesion properties (ISO 29862:2018)
- EN-ISO-29863 - Self adhesive tapes - Measurement of static shear adhesion (ISO 29863:2018)
- EN-ISO-29864 - Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018)
- EN-ISO-9311-1 - Part 1: Determination of Film Properties, Adhesives for Thermoplastic Piping Systems
- EN-ISO-9311-2 - Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength
- EN-ISO-9311-3 - Part 3: Test Method for the Determination of Resistance To Internal Pressure, Adhesive
- EN-ISO-9653 - Adhesives, Test Method for Shear Impact Strength of Adhesives Bonds
- EN-ISO-9665 - Adhesives, Animal Glues, Methods of Sampling & Testing (ISO9665: 1998)
- JIS-K-6831 - Adhesives -- Determination of temperature dependence of adhesive bonds
- SIS-CEN-ISO/TS-17575-1 - Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging - Technical Corrigendum 1 (ISO/TS 17575-1:2010/Cor 1:2013)
- SIS-CEN/TR-14548 - Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
- SIS-CEN/TS-14999 - Adhesives for thermoplastic piping systems - Accelerated ageing test of adhesives
- SS-EN-1066 - Adhesives - Sampling
- SS-EN-1067 - Adhesives - Examination and preparation of samples for testing
- SS-EN-12004 - Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
- SS-EN-12004-1 - Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
- SS-EN-12004-2 - Adhesives for ceramic tiles - Part 2: Test methods
- SS-EN-12004-AM1 - Adhesives for tiles - Definitions and specifications
- SS-EN-12023 - Self adhesive tapes - Measurement of water vapourtransmission in a warm humid athmosphere
- SS-EN-12024 - Self adhesive tapes - Measurement of resistance to elevated temperature and humidity
- SS-EN-12025 - Nanomaterials -- Quantification of nano-object release from powders by generation of aerosols
- SS-EN-12026 - Self adhesive tapes - Measurement of the unwinding force at high speed
- SS-EN-12027 - Self adhesive tapes - Measurement of flame resistance
- SS-EN-12028 - Self adhesive tapes - Measurement of elongation under static load
- SS-EN-12029 - Self adhesive tapes - Determination of the water-soluble corrosive ions
- SS-EN-12030 - Self adhesive tapes - Measurement of impact resistance
- SS-EN-12031 - Self adhesive tapes - Measurement of bursting strenght
- SS-EN-12032 - Self adhesive tapes - Measurement of bonding of thermosetting adhesive tapes during curing
- SS-EN-12033 - Self adhesive tapes - Measurement of bonding of thermosetting adhesive tapes curing
- SS-EN-12034 - Self adhesive tapes - Measurement of the length of a roll of adhesive tape
- SS-EN-12035 - Self adhesive tapes - Flagging of adhesive tape
- SS-EN-12036 - Self adhesive tapes - Solvent penetration into adhesive masking tapes
- SS-EN-12044 - Footwear, leather and imitation leather goods manufucturing machines - Cutting and punching machines - Safety requirements
- SS-EN-12092 - Adhesives - Determination of viscosity
- SS-EN-12192-2 - Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents
- SS-EN-1238 - Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball)
- SS-EN-1239 - Adhesives - Freeze-thaw stability
- SS-EN-1240 - Adhesives - Determination of hydroxyl value and/or hydroxyl content
- SS-EN-1241 - Adhesives - Determination of acid values
- SS-EN-1242 - Adhesives - Determination of isocyanate content
- SS-EN-1243 - Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates
- SS-EN-12436 - Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements
- SS-EN-1244 - Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light
- SS-EN-1245 - Adhesives - Determination of pH
- SS-EN-1246 - Adhesives - Determination of ash and sulphated ash
- SS-EN-12481 - Self adhesive tapes - Terminology
- SS-EN-12701 - Structural adhesives - Storage - Definitions of words and phrases relating to the product life of structural adhesives and related materials
- SS-EN-12702 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers
- SS-EN-12703 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
- SS-EN-12704 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives
- SS-EN-12705 - Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration
- SS-EN-12765 - Classification of thermosetting wood adhesives for non-structural applications
- SS-EN-1279-1 - Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for substitution, tolerances and visual quality
- SS-EN-12808-1 - Grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars
- SS-EN-12808-3 - Grouts for tiles - Part 3: Determination of flexural and compressive strength
- SS-EN-12808-4 - Grouts for tiles - Part 4: Determination of shrinkage
- SS-EN-12860 - Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
- SS-EN-12960 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
- SS-EN-12961 - Adhesive for leather and footwear materials - Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives
- SS-EN-12961-AM1 - Adhesives for leather and footwear materials - Determination of optimum activation temperatures and maximum activation life or solvent-based and dispersion adhesives
- SS-EN-12962 - Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index)
- SS-EN-12963 - Adhesives - Determination of free monomer content in adhesives based on synthetic polymers
- SS-EN-12964 - Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance to bonds at increasing temperature
- SS-EN-1308 - Adhesives for tiles - Determination of slip
- SS-EN-1308-AM1 - Adhesives for tiles - Determination of slip
- SS-EN-13211 - Air Quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
- SS-EN-1322 - Adhesives for tiles - Definitions and terminology
- SS-EN-1322-AM1 - Adhesives for tiles - Definitions and terminology
- SS-EN-1323 - Adhesives for tiles - Concrete slabs for tests
- SS-EN-1323-AM1 - Adhesives for tiles - Concrete slab for test
- SS-EN-1324 - Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives
- SS-EN-1324-AM1 - Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives
- SS-EN-13415 - Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites
- SS-EN-1346 - Adhesives for tiles - Determination of open time
- SS-EN-1346-AM1 - Adhesives for tiles - Determination of open time
- SS-EN-1347 - Adhesives for tiles - Determination of wetting capability
- SS-EN-1347-AM1 - Adhesives for tiles - Determination of wetting capability
- SS-EN-1348 - Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
- SS-EN-1348-AM1 - Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
- SS-EN-1372 - Adhesives - Test method for adhesives for floor and wall coverings - Peel test
- SS-EN-1373 - Adhesives - Test method for adhesives for floor and wall coverings - Shear test
- SS-EN-13733 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of the durability of structural bonding agents
- SS-EN-13852-1 - Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
- SS-EN-13887 - Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
- SS-EN-13888-2 - Grouts for ceramic tiles - Part 2: Test methods
- SS-EN-1391 - Adhesives for leather and footwear materials - A method for evaluating the bondability of materials - Minimum requirements and material classification
- SS-EN-1392 - Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions
- SS-EN-13999-1 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure
- SS-EN-13999-2 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds
- SS-EN-13999-3 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes
- SS-EN-13999-4 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates
- SS-EN-14022 - Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives
- SS-EN-14173 - Structural adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:1993 modified)
- SS-EN-14256 - Adhesives for non-structural wood applications - Test method and requirements for resistance to static load
- SS-EN-14257 - Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
- SS-EN-14258 - Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
- SS-EN-14259 - Adhesives for floor coverings - Requirements for mechanical and electrical performance
- SS-EN-14292 - Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature
- SS-EN-14293 - Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements
- SS-EN-14294 - Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes
- SS-EN-14410 - Self adhesive tapes - Measurement of breaking strength and elongation at break
- SS-EN-14444 - Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test (ISO 10354:1992 modified)
- SS-EN-14493 - Structural adhesives - Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:1993 modified)
- SS-EN-14510 - Adhesives for leather and footwear materials - Solvent and dispersion adhesives - Determination of sole positioning tack (spotting tack)
- SS-EN-14591-4 - Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
- SS-EN-1464 - Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
- SS-EN-1465 - Adhesives - Determination of tensile lap-shear strength of bonded assemblies
- SS-EN-14680 - Adhesives for non-pressure thermoplastics piping systems - Specifications
- SS-EN-14713 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding
- SS-EN-14814 - Adhesives for thermoplastic piping systems for fluids under pressure - Specifications
- SS-EN-14869-1 - Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
- SS-EN-14869-2 - Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified)
- SS-EN-15062 - Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions
- SS-EN-15190 - Structural adhesives - Test methods for assesing long term durability of bonded metallic structures
- SS-EN-15274 - General purpose adhesives for structural assembly - Requirements and test methods
- SS-EN-15275 - Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
- SS-EN-15307 - Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
- SS-EN-15336 - Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified)
- SS-EN-15337 - Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990 modified)
- SS-EN-15416-1 - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test)
- SS-EN-15416-2 - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 2: Static load test of multiple bondline specimens in compression shear
- SS-EN-15416-3 - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
- SS-EN-15416-4 - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions
- SS-EN-15416-5 - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions
- SS-EN-15425 - Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
- SS-EN-15865 - Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified)
- SS-EN-15870 - Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified)
- SS-EN-16254 - Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements
- SS-EN-16556 - Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications
- SS-EN-1719 - Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack
- SS-EN-1720 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability
- SS-EN-1721 - Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack
- SS-EN-17224 - Determination of compressive shear strength of wood adhesives at elevated temperatures
- SS-EN-17293 - Temporary works equipment - Execution - Requirements for manufacturing
- SS-EN-17317 - Resilient, textile, laminate and modular mechanical locked floor coverings - Light reflectance value (LRV) of a flooring surface
- SS-EN-17333-3 - Characterisation of one component foam - Part 3: Application
- SS-EN-17334 - Glued-in rods in glued structural timber products - Testing, requirements and bond shear strength classification
- SS-EN-17418 - Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification
- SS-EN-17460 - Railway applications - Adhesive bonding of rail vehicles and their components
- SS-EN-17618 - Adhesives - Wood-to-wood adhesive bonds for non-structural applications - Determination of shear strength by compressive loading
- SS-EN-17668 - Adhesives for floor coverings - Preparation of adhesive application - Test methods for the determination of corresponding humidity of mineral substrates
- SS-EN-1841 - Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive
- SS-EN-1895 - Adhesives for paper and board, packaging and disposable sanitary products - 180° - "T" peel test for a flexible-to-flexible assembly
- SS-EN-1896 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
- SS-EN-1902 - Adhesives - Test mthod for adhesives for floor and wall coverings - Shear creep test
- SS-EN-1903 - Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
- SS-EN-1939 - Self adhesive tapes - Determination of peel adhesion properties
- SS-EN-1940 - Self adhesive tapes - Measurement of breaking strenght
- SS-EN-1941 - Self adhesive tapes - Measurement of elongation at break
- SS-EN-1942 - Self adhesive tapes - Measurement of thickness
- SS-EN-1943 - Self adhesive tapes - Measurement of static shear adhesion
- SS-EN-1944 - Self adhesive tapes - Measurement of unwind adhesion at low speed
- SS-EN-1945 - Self adhesive tapes - Measurement of quick stick
- SS-EN-1965-1 - Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
- SS-EN-1965-2 - Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate
- SS-EN-1966 - Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method
- SS-EN-1967 - Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet pell test in association with the floating roller method
- SS-EN-1994-1-2 - Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
- SS-EN-204 - Classification of thermoplastic wood adhesives for non-structural applications
- SS-EN-205 - Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints
- SS-EN-2243-4 - Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test
- SS-EN-26922 - Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987)
- SS-EN-28510-1 - Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90º peel
- SS-EN-28510-2 - Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 190 degrees peel (ISO 8510-2:1990)
- SS-EN-29142 - Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded laboratory ageing conditions for testing bonded joints(ISO 9142:1990+Cor 1:1995)
- SS-EN-29653 - Adhesives - Test method for shear impact strengthof adhesive bonds
- SS-EN-301 - Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
- SS-EN-302-1 - Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
- SS-EN-302-2 - Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
- SS-EN-302-3 - Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
- SS-EN-302-3-AM1 - Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
- SS-EN-302-4 - Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
- SS-EN-302-5 - Adhesives for load-bearing structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
- SS-EN-302-6 - Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
- SS-EN-302-7 - Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
- SS-EN-302-8 - Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear
- SS-EN-522 - Adhesives for leather and footwear materials - Bond strength - Minimum requirements and adhesive classification
- SS-EN-542 - Adhesives - Determination of density
- SS-EN-543 - Adhesives - Determination of apparent density of powder and granule adhesives
- SS-EN-827 - Adhesives - Determination of conventional solids content and constant mass solids content
- SS-EN-828 - Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
- SS-EN-923 - Adhesives - Terms and definitions
- SS-EN-924 - Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint
- SS-EN-ISO-10123 - Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013)
- SS-EN-ISO-10363 - Hot-melt adhesives - Determination of thermal stability (ISO 10 363:1992)
- SS-EN-ISO-10364 - Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015)
- SS-EN-ISO-10365 - Adhesives - Designation of main failure patterns (ISO 10365:2022)
- SS-EN-ISO-10964 - Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993)
- SS-EN-ISO-11339 - Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2022)
- SS-EN-ISO-11343 - Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions - Wedge impact method (ISO 11343:2019)
- SS-EN-ISO-13445 - Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003)
- SS-EN-ISO-14678 - Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005)
- SS-EN-ISO-15605 - Adhesives - Sampling (ISO 15605:2000)
- SS-EN-ISO-15908 - Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives (ISO 15908:2002)
- SS-EN-ISO-21368 - Adhesives - Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures (ISO 21368:2022)
- SS-EN-ISO-22631 - Adhesives - Test method for adhesives for floor and wall coverings - Peel test (ISO 22631:2019)
- SS-EN-ISO-22632 - Adhesives - Test method for adhesives for floor and wall coverings - Shear test (ISO 22632:2019)
- SS-EN-ISO-22633 - Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (ISO 22633:2019)
- SS-EN-ISO-22635 - Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing (ISO 22635:2019)
- SS-EN-ISO-22636 - Adhesives - Adhesives for floor coverings - Requirements for mechanical and electrical performance (ISO 22636:2020)
- SS-EN-ISO-22637 - Adhesives - Test of adhesive for floor covering - Determination of the electrical resistance of adhesive films and composites (ISO 22637:2019)
- SS-EN-ISO-29862 - Self adhesive tapes - Determination of peel adhesion properties (ISO 29862:2018)
- SS-EN-ISO-29863 - Self adhesive tapes - Measurement of static shear adhesion (ISO 29863:2018)
- SS-EN-ISO-29864 - Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018)
- SS-EN-ISO-6076 - Adhesives - Installation of floor coverings, wood flooring, levelling compounds and tiles - Specification of trowel notch sizes (ISO 6076:2023)
- SS-EN-ISO-9142 - Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
- SS-EN-ISO-9311-1 - Adhesives for thermoplastic piping systems - Part 1: Determination of film properties (ISO 9311-1:2005)
- SS-EN-ISO-9311-2 - Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011)
- SS-EN-ISO-9311-3 - Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005)
- SS-EN-ISO-9653 - Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998)
- SS-EN-ISO-9664 - Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993)
- SS-EN-ISO-9665 - Adhesives - Animal glues - Methods for sampling and testing (ISO 9665:1998)
- SS-ENV-13999-1 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure
- SS-ENV-13999-2 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds
- SS-ENV-13999-3 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes
- SS-ENV-13999-4 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates
- SS-ENV-1965-1 - Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
- SS-ENV-1966 - Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method
- SS-ENV-1967 - Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method
- SS-ENV-302-5 - Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of the conventional assembly time
- SS-ISO-10123 - Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:2013, IDT)
- SS-ISO-11343 - Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method
- SS-ISO-13445 - Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
- SS-ISO-15108 - Adhesives - Determination of strength of bonded joints using a bending-shear method
- SS-ISO-15109 - Adhesives - Determination of the time to rupture of bonded joints under static load
- SS-ISO-15166-1 - Adhesives - Method of preparing bulk specimens - Part 1: Two-part systems
- SS-ISO-15170-2 - Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 2: Tests and requirements
- SS-ISO-21368 - Adhesives - Guidelines for the fabrication of adhesively bonded structures and for reporting procedures suitable for the risk evaluation of such structures (ISO 21368:2005, IDT)
- SS-ISO-21785 - Air cargo unit load devices - Load distribution model (ISO 21785:2020, IDT)
- SS-ISO-22762-2 - Elastomeric seismic-protection isolators - Part 2: Applications for bridges - Specifications (ISO 22762-2:2018, IDT)
- SS-ISO-22762-3 - Elastomeric seismic-protection isolators - Part 3: Applications for buildings - Specifications (ISO 22762-3:2018, IDT)
- SS-ISO-25179 - Adhesives - Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives (ISO 25179:2010, IDT)
- SS-ISO-25217 - Adhesives - Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens (ISO 25217:2009, IDT)
- SS-ISO-26842-1 - Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 1: Resistance to delamination in non-severe environments (ISO 26842-1:2013, IDT)
- SS-ISO-26842-2 - Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 2: Resistance to delamination in severe environments (ISO 26842-2:2013, IDT)
- SS-ISO-4587 - Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies (ISO 4587:2003, IDT)
- SS-ISO-6237 - Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by tensile loading (ISO 6237:2003, IDT)
- SS-ISO-6922 - Adhesives - Determination of tensile strength of butt joints
- SS-ISO-8510-1 - Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90 degrees peel
- SS-ISO-8510-2 - Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degrees peel
- SS-ISO-9142 - Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints - Technical corrigendum 1
- SS-ISO-9653 - Adhesives - Test method for shear impact strengthof adhesive bonds
- SS-ISO-9665 - Adhesives - Animal glues - Methods of samplin and testing
- UNE-CEN-14999 - Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container
- UNE-EN-14680 - Adhesives for non-pressure thermoplastics piping systems - Specifications