Document Center List of Standards on Latex And Raw Rubber
ICS Code 83.040.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1241 - Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
- ASTM-D1055 - Standard Specifications for Flexible Cellular Materials-Latex Foam (Withdrawn 2014)
- ASTM-D1076 - Standard Specification for Rubber—Concentrated, Ammonia Stabilized, Creamed, and Centrifuged Natural Latex
- ASTM-D1278 - Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
- ASTM-D1417 - Standard Test Methods for Rubber Latices—Synthetic
- ASTM-D1485 - Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation
- ASTM-D1764 - Standard Specification for Rubber Latex Products for Automotive Applications (Withdrawn 2003)
- ASTM-D2227 - Standard Specification for Natural Rubber (NR) Technical Grades
- ASTM-D2449 - Standard Specification for Rubber Bales From Natural Sources—Limit on Coating
- ASTM-D2702 - Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics
- ASTM-D2703 - Standard Practice for Rubber Chemicals-Determination of Ultraviolet Absorbance Characteristics (Withdrawn 2000)
- ASTM-D3157 - Standard Test Method for Rubber from Natural Sources—Color
- ASTM-D3184 - Standard Practice for Rubber—Evaluation of NR (Natural Rubber)
- ASTM-D3194 - Standard Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI)
- ASTM-D3314 - Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
- ASTM-D3616 - Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity
- ASTM-D3853 - Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding
- ASTM-D3900 - Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
- ASTM-D4026 - Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
- ASTM-D4747 - Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography (Withdrawn 2019)
- ASTM-D4827 - Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
- ASTM-D5097 - Filter-Retained Solids Content of Polymer Latexes, Standardtest Method For
- ASTM-D5712 - Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method
- ASTM-D6048 - Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers
- ASTM-D6049 - Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
- ASTM-D6204 - Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
- ASTM-D6342 - Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
- ASTM-D703 - Specification for Polystyrene Molding and Extrusion Materials (Withdrawn 1987)
- ASTM-D8036 - Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI
- ASTM-D832 - Standard Practice for Rubber Conditioning For Low Temperature Testing
- ASTM-D956 - Practice for Compression Molding Specimens of Amino Molding Compounds (Withdrawn 1992)
BSI:
- BS-5738 - Methods of test for evaluation of vulcanization characteristics for raw natural rubbers
- BS-6057-3.1 - Rubber latices. Methods of test
- BS-6057-3.13 - Rubber latices. Methods of test
- BS-6057-3.16 - Rubber latices. Methods of test. Preparation of dry polymer from synthetic latices
- BS-6057-3.19 - Rubber latices. Methods of test. Determination of total bound styrene content of reinforced styrene-butadiene rubber latices
- BS-6057-3.2 - Rubber Latices, Methods of Test, Determination of Total Solids Content of Rubber Latic
- BS-6057-3.22 - Determination of Residual Acrylonitrile Content in Nitrile Latex
- BS-6057-3.23 - Rubber latices. Methods of test. Microbiological examination of synthetic rubber latex
- BS-6057-3.24 - Rubber latices. Methods of test. Preparation of dry films from natural rubber latex concentrate
- BS-6057-3.25 - Rubber latices. Methods of test. Determination of alkalinity for polychloroprene latex
- BS-6057-3-3.13 - Rubber latices. Methods of test
- BS-6057-3.7 - Rubber latices. Methods of test. Determination of density of natural rubber latices
- BS-6057-3.8 - Rubber latices. Methods of test. Determination of coagulum content (sieve residue)
- BS-7164-21 - Chemical tests for raw and vulcanized rubber. Determination of nitrogen content
- BS-7164-26.1 - Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content. Atomic absorption spectrometry
- BS-7164-28.1 - Chemical tests for raw and vulcanized rubber. Methods for determination of copper content
- BS-7164-30.1 - Chemical tests for raw and vulcanized rubber. Methods for determination of lead content
- BS-7164-31.1 - Chemical Tests for Raw & Vulcanized Rubber, Determination of Anti-Degradants, High-per
- BS-7164-6.1 - Section 6.1: Raw Rubber, Part 6: Methods for Determination of Volatile Matter, Chemica
- BS-903-A59.2 - Section 59.2: Determination of the Plasticity Retention Index (PRI) of Raw Natural Rub
- BS-ISO-10638 - Rubber. Identification of antidegradants by gas chromatography/mass spectrometry
- BS-ISO-11089 - Rubber, raw synthetic. Determination of antidegradants by high-performance liquid chromatography
- BS-ISO-11344 - Rubber, raw synthetic. Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
- BS-ISO-11852 - Rubber. Determination of magnesium content of field natural rubber latex by titration
- BS-ISO-11852-TC - Tracked Changes. Rubber. Determination of magnesium content of field natural rubber latex by titration
- BS-ISO-12000 - Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods
- BS-ISO-12243 - Medical gloves made from natural rubber latex. Determination of water-extractable protein using the modified Lowry method
- BS-ISO-123 - Rubber latex. Sampling
- BS-ISO-124 - Latex, rubber. Determination of total solids content
- BS-ISO-12492 - Rubber, raw. Determination of water content by Karl Fischer method
- BS-ISO-125 - Natural rubber latex concentrate. Determination of alkalinity
- BS-ISO-126 - Natural rubber latex concentrate. Determination of dry rubber content
- BS-ISO-127 - Rubber, natural latex concentrate. Determination of KOH number
- BS-ISO-127-TC - Tracked Changes. Rubber, natural latex concentrate. Determination of KOH number
- BS-ISO-13741-1-TC - Tracked Changes. Plastics/rubber. Determination of residual monomers and other organic components by capillary-column gas chromatography
- BS-ISO-1409 - Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of surface tension
- BS-ISO-1629 - Rubber and latices. Nomenclature
- BS-ISO-1652 - Rubber latex. Determination of apparent viscosity by the Brookfield test method
- BS-ISO-1656 - Rubber, raw natural, and rubber latex, natural. Determination of nitrogen content
- BS-ISO-16564 - Rubber, raw natural. Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
- BS-ISO-17278 - Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
- BS-ISO-17403 - Rubber. Determination of magnesium content of field and concentrated natural rubber latices by titration (cyanide-free method)
- BS-ISO-1795 - Rubber, raw natural and raw synthetic. Sampling and further preparative procedures
- BS-ISO-1795-TC - Tracked Changes. Rubber, raw natural and raw synthetic. Sampling and further preparative procedures
- BS-ISO-19043 - Natural rubber latex concentrate. Determination of total phosphate content by spectrophotometric method
- BS-ISO-19043-TC - Tracked Changes. Natural rubber latex concentrate. Determination of total phosphate content by spectrophotometric method
- BS-ISO-19050 - Rubber, raw, vulcanized. Determination of metal content by ICP-OES
- BS-ISO-19050-TC - Tracked Changes. Rubber, raw, vulcanized. Determination of metal content by ICP-OES
- BS-ISO-19051 - Rubber, raw natural, and rubber latex, natural. Determination of nitrogen content by Micro Dumas combustion method
- BS-ISO-19240 - Industrial valves. Lined metal quarter turn and check valves for chemical process and related industries
- BS-ISO-19246 - Rubber compounding ingredients. Silica. Oil absorption of precipitated silica
- BS-ISO-19846 - Reclaimed rubber. Coding and classification system
- BS-ISO-2000 - Rubber, raw natural. Guidelines for the specification of technically specified rubber (TSR)
- BS-ISO-2004 - Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specification
- BS-ISO-2004-TC - Tracked Changes. Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specification
- BS-ISO-2005 - Rubber latex, natural, concentrate. Determination of sludge content
- BS-ISO-2006-1 - Rubber latex, synthetic. Determination of mechanical stability
- BS-ISO-2006-1-TC - Tracked Changes. Rubber latex, synthetic. Determination of mechanical stability
- BS-ISO-2006-2 - Rubber latex, synthetic. Determination of mechanical stability
- BS-ISO-2028 - Synthetic rubber latex. Preparation of dry polymer
- BS-ISO-20851 - Synthetic rubber latex. Examination for microorganisms
- BS-ISO-21461 - Rubber. Determination of the aromaticity of oil in vulcanized rubber compounds
- BS-ISO-22768 - Raw rubber and rubber latex. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- BS-ISO-24376 - Rubber, raw natural. Guidelines and requirements for technically specified low-protein natural rubber
- BS-ISO-2453 - Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
- BS-ISO-24698-1 - Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR)
- BS-ISO-24698-2 - Rubber, raw. Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR)
- BS-ISO-248 - Rubber, raw. Determination of volatile-matter content
- BS-ISO-248-1 - Rubber, raw. Determination of volatile-matter content
- BS-ISO-248-1-TC - Tracked Changes. Rubber, raw. Determination of volatile-matter content
- BS-ISO-248-2 - Rubber, raw. Determination of volatile-matter content
- BS-ISO-249 - Rubber, raw natural. Determination of dirt content
- BS-ISO-249-TC - Tracked Changes. Rubber, raw natural. Determination of dirt content
- BS-ISO-2930 - Raw, natural rubber. Determination of the plasticity retention index (PRI)
- BS-ISO-2930-TC - Tracked Changes. Raw, natural rubber. Determination of the plasticity retention index (PRI)
- BS-ISO-3136 - Rubber latex. Styrene-butadiene. Determination of bound styrene content
- BS-ISO-35 - Natural rubber latex concentrate. Determination of mechanical stability
- BS-ISO-3899 - Rubber. Nitrile latex. Determination of residual acrylonitrile content
- BS-ISO-3900 - Rubber. Nitrile latex. Determination of bound acrylonitrile content.
- BS-ISO-3900-TC - Tracked Changes. Rubber. Nitrile latex. Determination of bound acrylonitrile content.
- BS-ISO-4660 - Rubber, raw natural. Colour index test
- BS-ISO-506 - Rubber latex, natural, concentrate. Determination of volatile fatty acid number
- BS-ISO-6101-2 - Rubber. Determination of metal content by atomic absorption spectrometry
- BS-ISO-6235 - Rubber, raw. Determination of block polystyrene content. Ozonolysis method
- BS-ISO-706 - Rubber latex. Determination of coagulum content (sieve residue)
- BS-ISO-7681 - Natural rubber field latex. Determination of dry rubber content
- BS-ISO-7781 - Styrene-butadiene rubber, raw. Determination of soap and organic-acid content
- BS-ISO-7836 - Natural rubber. Identification of phytosterols, including -sitosterol
- BS-ISO-9026 - Raw rubber or unvulcanized compounds. Determination of green strength
- BS-ISO-9026-TC - Tracked Changes. Raw rubber or unvulcanized compounds. Determination of green strength
- BS-ISO-976 - Rubber and plastics. Polymer dispersions and rubber lattices. Determination of pH
- PD-ISO-16095 - Reclaimed rubber derived from products containing mainly natural rubber. Evaluation procedure
- PD-ISO-16095-TC - Tracked Changes. Reclaimed rubber derived from products containing mainly natural rubber. Evaluation procedure
- PD-ISO-16096 - Reclaimed isobutene-isoprene (IIR) rubber. Evaluation procedure
- PD-ISO-16096-TC - Tracked Changes. Reclaimed isobutene-isoprene (IIR) rubber. Evaluation procedure
- PD-ISO-16314 - Rubber. Measurement of the aromaticity of oil in reclaimed rubbers
ISO:
- ISO-10638 - Rubber - Identification of antidegradants by gas chromatography/mass spectrometry
- ISO-11089 - Rubber, raw synthetic - Determination of antidegradants by high-performance liquid chromatography
- ISO-11344 - Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
- ISO-1147 - Plastics/rubber - Polymer dispersions and synthetic rubber latices - Freeze-thaw cycle stability test
- ISO-11852 - Rubber - Determination of magnesium content of field natural rubber latex by titration
- ISO-12000 - Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Definitions and review of test methods
- ISO-12243 - Medical gloves made from natural rubber latex -- Determination of water-extractable protein using the modified Lowry method
- ISO-12243-AM1 - - Amendment 1
- ISO-123 - Rubber latex -- Sampling
- ISO-124 - Latex, rubber - Determination of total solids content
- ISO-124-1 - Amendment 1: Precision data, Latex, rubber - Determination of total solids content
- ISO-124-2 - Amendment 2: Determination at temperatures higher than 105 degrees C, Latex, rubber - Determination of total solids content
- ISO-12492 - Rubber, raw - Determination of water content by Karl Fischer method
- ISO-125 - Natural rubber latex concentrate - Determination of alkalinity
- ISO-126 - Natural rubber latex concentrate - Determination of dry rubber content
- ISO-127 - Rubber, natural latex concentrate - Determination of KOH number
- ISO-127-1 - Natural rubber latex - Determination of KOH numberAmendment 1: Precision data
- ISO-13741-1 - Plastics/rubber - Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 1: Direct liquid injection method
- ISO-13741-2 - Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography - Part 2: Headspace method
- ISO-13773 - Rubber - Polychloroprene latex - Determination of alkalinity
- ISO-1409 - Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of surface tension
- ISO-16095 - Reclaimed rubber derived from products containing mainly natural rubber - Evaluation procedure
- ISO-16096 - Reclaimed isobutene-isoprene (IIR) rubber - Evaluation procedure
- ISO-16097 - Vulcanized crumb rubber - Evaluation procedures
- ISO-1629 - Rubber and latices - Nomenclature
- ISO-1629-1 - Rubbers and latices - NomenclatureAmendment 1 - Corrigendum
- ISO-16314 - Rubber - Measurement of the aromaticity of oil in reclaimed rubbers
- ISO-1652 - Rubber latex - Determination of apparent viscosity by the Brookfield test method
- ISO-1656 - Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content
- ISO-16564 - Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
- ISO-16564-1 - Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) - Amendment 1
- ISO-1657 - Rubber, raw and rubber latex - Determination of iron content - 1,10-Phenanthroline photometric method
- ISO-17052 - Rubber, raw - Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method
- ISO-17278 - Rubber, raw natural - Determination of the gel content of technically specified rubber (TSR)
- ISO-17403 - Rubber - Determination of magnesium content of field and concentrated natural rubber latices by titration (cyanide-free method)
- ISO-1795 - Rubber, raw natural and raw synthetic - Sampling and further preparative procedures
- ISO-1802 - Natural rubber latex concentrate - Determination of boric acid content
- ISO-19043 - Natural rubber latex concentrate - Determination of total phosphate content by spectrophotometric method
- ISO-19050 - Rubber, raw, vulcanized - Determination of metal content by ICP-OES
- ISO-19051 - Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content by Micro Dumas combustion method
- ISO-19246 - Rubber compounding ingredients - Silica - Oil absorption of precipitated silica
- ISO-19846 - Reclaimed rubber - Coding and classification system
- ISO-2000 - Rubber, raw natural - Guidelines for the specification of technically specified rubber (TSR)
- ISO-2004 - Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specifications
- ISO-2005 - Rubber latex, natural, concentrate - Determination of sludge content
- ISO-2005-1 - Natural rubber latex - Determination of sludge content - Amendment 1: Precision data
- ISO-2006 - Rubber latex, synthetic - Determination of high-speed mechanical stability
- ISO-2006-1 - Rubber latex, synthetic - Determination of mechanical stability - Part 1: High-speed method
- ISO-2006-2 - Rubber latex, synthetic - Determination of mechanical stability - Part 2: Moderate-speed method under load
- ISO-2027 - Natural rubber latex concentrate, evaporated, preserved - Specification
- ISO-2028 - Synthetic rubber latex - Preparation of dry polymer
- ISO-2028-RL - Synthetic rubber latex - Preparation of dry polymer (includes Redline Version)
- ISO-20851 - Synthetic rubber latex - Examination for microorganisms
- ISO-2115 - Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature
- ISO-21461 - Rubber - Determination of the aromaticity of oil in vulcanized rubber compounds
- ISO-22768 - Raw rubber and rubber latex - Determination of the glass transition temperature by differential scanning calorimetry (DSC)
- ISO-24376 - Rubber, raw natural - Guidelines and requirements for technically specified low-protein natural rubber
- ISO-2453 - Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method
- ISO-24698-1 - Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Part 1: Combustion (Dumas) method
- ISO-24698-2 - Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) - Part 2: Kjeldahl method
- ISO-248 - Rubber, raw - Determination of volatile-matter content
- ISO-248-1 - Rubber, raw - Determination of volatile-matter content - Part 1: Hot-mill method and oven method
- ISO-248-2 - Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
- ISO-249 - Rubber, raw natural - Determination of dirt content
- ISO-249-AM1 - - Amendment 1: Rubber, raw natural - Determination of dirt content - Amendment 1
- ISO-2930 - Raw, natural rubber - Determination of the plasticity retention index (PRI)
- ISO-2930-1 - Amendment 1: Rubber, Raw Natural - Determination of Plasticity Retention Index (PRI)
- ISO-3136 - Rubber latex - Styrene-butadiene - Determination of bound styrene content
- ISO-35 - Natural rubber latex concentrate - Determination of mechanical stability
- ISO-35-1 - Rubber latex, natural - Determination of mechanical stability - Amendment 1: Precision data
- ISO-3899 - Rubber - Nitrile latex - Determination of residual acrylonitrile content
- ISO-3900 - Rubber - Nitrile latex - Determination of bound acrylonitrile content
- ISO-4655 - Rubber - Reinforced styrene-butadiene latex - Determination of total bound styrene content
- ISO-4660 - Rubber, raw natural - Colour index test
- ISO-498 - Natural rubber latex concentrate - Preparation of dry films
- ISO-506 - Rubber latex, natural, concentrate - Determination of volatile fatty acid number
- ISO-6225-1 - Rubber, raw, natural - Determination of castor oil content - Part 1: Determination of castor oil glyceride content by thin-layer chromatography
- ISO-6225-2 - Rubber, raw, natural - Determination of castor oil content - Part 2: Determination of total ricinoleic acid content by gas chromatography
- ISO-6235 - Rubber, raw - Determination of block polystyrene content - Ozonolysis method
- ISO-705 - Rubber latex - Determination of density between 5 degrees C and 40 degrees C
- ISO-706 - Rubber latex - Determination of coagulum content (sieve residue)
- ISO-7323 - Rubber, raw and unvulcanized compounded - Determination of plasticity number and recovery number - Parallel-plate method
- ISO-7664 - Rubber, raw natural and raw synthetic -- General guidance on storage
- ISO-7681 - Natural rubber field latex - Determination of dry rubber content
- ISO-7780 - Rubbers and rubber latices - Determination of manganese content - Sodium periodate photometric methods
- ISO-7781 - Styrene-butadiene rubber, raw - Determination of soap and organic-acid content
- ISO-7836 - Natural rubber - Identification of phytosterols, including -sitosterol
- ISO-8053 - Rubber and latex - Determination of copper content - Photometric method
- ISO-9026 - Raw rubber or unvulcanized compounds - Determination of green strength
- ISO-9252 - Synthetic rubber latex - Microbiological examination
- ISO-976 - Rubber and plastics - Polymer dispersions and rubber latices - Determination of pH
- ISO-976-1 - Rubber latices - Determination of pHAmendment 1: Precision data
- ISO/DIS-1795 - Rubber, Raw Natural and Raw Synthetic - Sampling and Further Preparative Procedures
Other SDOs:
- DIN-ISO-1629 - Rubber and latices - Nomenclature
- DIN-ISO-2006 - Rubber Latex, Synthetic - Determination of High-Speed Mechanical Stability
- DIN-ISO-2028 - Synthetic Rubber Latex, Preparation of Dry Polymer
- DIN-ISO-4655 - Rubber, Reinforced Styrene-Butadiene Latex, Determination of Total Bound Styrene Conte
- DIN-ISO-705 - Rubber Latex, Determination of Density Between 5 Degrees C &40 Degrees C
- DIN-ISO-706 - Rubber Latex - Determination of Coagulum Content (Sieve Residue)
- SS-EN-12639 - Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy
- SS-EN-13516 - Footwear - Test methods for uppers, lining and insocks - Colour fastness to rubbing
- SS-EN-14744 - Inland navigation vessels and sea-going vessels - Navigation light
- SS-EN-1991-1-5 - Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
- SS-ISO-10638 - Rubber - Identification of antidegradants by gas chromatography/mass spectrometry (ISO 10638:2010, IDT)
- SS-ISO-11089 - Rubber, raw synthetic - Determination of antidegradants by high-performance liquid chromatography (ISO 11089:2010, IDT)
- SS-ISO-11344 - Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography (ISO 11344:2016, IDT)
- SS-ISO-123 - Rubber latex - Sampling
- SS-ISO-12492 - Rubber, raw - Determination of water content by Karl Fischer method (ISO 12492:2012, IDT)
- SS-ISO-1409 - Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of surface tension by the ring method (ISO 1409:2006, IDT)
- SS-ISO-1629 - Rubber and latices - Nomenclature (ISO 1629:2013, IDT)
- SS-ISO-1629-AM1 - Rubbers and latices - Nomenclature (ISO 1629:1995/Amd 1:2007, IDT)
- SS-ISO-1652 - Rubber latex - Determination of apparent viscosity by the Brookfield test method (ISO 1652:2004, IDT)
- SS-ISO-1656 - Rubber, raw natural and rubber latex, natural - Determination of nitrogen content
- SS-ISO-16564 - Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) (ISO 16564:2004, IDT)
- SS-ISO-16564-AM1 - Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) (ISO 16564:2004/Amd 1:2006, IDT)
- SS-ISO-1657 - Rubber, raw and rubber latex - Determination of iron content - 1,10-phenanthroline photometric method
- SS-ISO-17052 - Rubber, raw - Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method (ISO 17052:2007, IDT)
- SS-ISO-19050 - Rubber, raw, vulcanised - Determination of metal content by ICP-OES (ISO 19050:2021, IDT)
- SS-ISO-2000 - Rubber, raw natural - Guidelines for the specification of technically specified rubber (TSR) (ISO 2000:2003, IDT)
- SS-ISO-2028 - Synthetic rubber latex - Preparation of dry polymer
- SS-ISO-22768 - Rubber, raw - Determination of the glass transition temperature by differential scanning calorimetry (DSC) (ISO 22768:2017, IDT)
- SS-ISO-2453 - Rubber, raw styren-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method
- SS-ISO-24698-1 - Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene (NBR) - Part 1: Combustion (Dumas) method (ISO 24698-1:2008, IDT)
- SS-ISO-24698-2 - Rubber, raw - Determination of bound acrylonitrile content in acrylonitrile-butadiene (NBR) - Part 2: Kjeldahl method (ISO 24698-2:208, IDT)
- SS-ISO-248 - Rubber, raw - Determination of volatile-matter content (ISO 248:2005, IDT)
- SS-ISO-248-1 - Rubber, raw - Determination of volatile-matter content - Part 1: Hot-mill method and oven method (ISO 248-1:2011, IDT)
- SS-ISO-248-2 - Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit (ISO 248-2:2012, IDT)
- SS-ISO-249 - Rubber, raw natural - Determination of dirt content
- SS-ISO-2930 - Rubber, raw natural - Determination of plasticityretention index (PRI)
- SS-ISO-2930-AM1 - Rubber, raw natural - Determination of plasticity retention index (PRI) (ISO 2930:1995/Amd 1:2008, IDT)
- SS-ISO-35 - Natural rubber latex concentrate - Determination of mechanical stability (ISO 35:2004, IDT)
- SS-ISO-3899 - Rubber - Nitrile latex - Determination of residual acrylonitrile content (ISO 3899:2005, IDT)
- SS-ISO-3900 - Rubber - Nitrile latex - Determination of bound acrylonitrile content
- SS-ISO-4655 - Rubber - Reinforced styrene-butadiene latex - Determination of total bound styrene content
- SS-ISO-6225-1 - Rubber, raw natural - Determination of castor oil content - Part 1: Determination of castor oil glyceride content by thin-layer chromotography (ISO 6225-1:2006, IDT)
- SS-ISO-6225-2 - Rubber, raw natural - Determination of castor oil content - Part 2: Determination of total ricinoleic acid content by gas chromatography
- SS-ISO-6235 - Rubber, raw - Determination of block polystyrene content - Ozonolysis method
- SS-ISO-7323 - Rubber, raw and unvulcanized, compounded - Determination of plasticity number and recovery number - Parallel plate method (ISO 7323:2006, IDT)
- SS-ISO-7664 - Rubber, raw natural and raw synthetic - General guidance on storage
- SS-ISO-7781 - Styrene-butadiene rubber, raw - Determination of soap and organic-acid content (ISO 7781:2008, IDT)
- SS-ISO-9026 - Raw rubber or unvalcanised compounds - Determination of green strength (ISO 9026:2021, IDT)