Document Center List of Standards on Semi-Manufactures Of Timber Including Parquet, Wood Paving, Handles, Etc.
ICS Code 79.080
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D2394 - Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring
- ASTM-D25 - Standard Specification for Round Timber Piles
- ASTM-D2899 - Standard Practice for Establishing Allowable Stresses for Round Timber Piles
- ASTM-D2921 - Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
- ASTM-D4444 - Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
- ASTM-D5055 - Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
- ASTM-D6570 - Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
- ASTM-D6815 - Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
- ASTM-D6958 - Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings
- ASTM-D7032 - Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
- ASTM-D7438 - Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
- ASTM-D7746 - Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests
- ASTM-D8023 - Standard Specification for Round Wood Dowels (Pegs) for Use in Wood Construction
- ASTM-E2579 - Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
- ASTM-F2075 - Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
- ASTM-F2421 - Standard Test Method for Measurement of Resilient Floor Plank by Dial Gauge
BSI:
- BS-1186-3 - Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into aqueous food simulants by total immersion
- BS-1187 - Specification for wood blocks for floors
- BS-1297 - Specification for tongued and grooved softwood flooring
- BS-4050-2 - Specification for mosaic parquet panels
- BS-8605-1 - External timber cladding
- BS-EN-12465 - Wood Poles for Overhead Lines, Durability Requirements
- BS-EN-12509 - Timber Poles for Overhead Lines, Test Methods, Determination of Modulus of Elasticity,
- BS-EN-13226 - Wood flooring. Solid parquet elements with grooves and/or tongues
- BS-EN-13227 - Wood flooring. Solid lamparquet products
- BS-EN-13228 - Wood flooring. Solid wood overlay flooring elements including blocks with an interlocking system
- BS-EN-13307-1 - Timber blanks and semi-finished profiles for non-structural uses
- BS-EN-13442 - Wood and parquet flooring and wood panelling and cladding. Determination of the resistance to chemical agents
- BS-EN-13442-TC - Tracked Changes. Wood and parquet flooring and wood panelling and cladding. Determination of the resistance to chemical agents
- BS-EN-13488 - Wood flooring. Mosaic parquet elements
- BS-EN-13489 - Wood-flooring and parquet. Multi-layer parquet elements
- BS-EN-13489-TC - Tracked Changes. Wood-flooring and parquet. Multi-layer parquet elements
- BS-EN-13629 - Wood flooring. Solid individual and pre-assembled hardwood boards
- BS-EN-13647 - Wood flooring and wood panelling and cladding. Determination of geometrical characteristics
- BS-EN-13696 - Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance
- BS-EN-13990 - Wood flooring. Solid softwood floor boards
- BS-EN-14279 - Laminated veneer lumber (LVL). Definitions, classification and specifications
- BS-EN-14342 - Wood flooring and parquet. Characteristics, evaluation of conformity and marking
- BS-EN-14354 - Wood-based panels. Wood veneer floor coverings
- BS-EN-14354-TC - Tracked Changes. Wood-based panels. Wood veneer floor coverings
- BS-EN-14374 - Timber structures. Structural laminated veneer lumber. Requirements
- BS-EN-14519 - Solid softwood panelling and cladding. Softwood machined profiles with tongue and groove
- BS-EN-14761 - Wood flooring. Solid wood parquet. Vertical finger and module brick
- BS-EN-14762 - Wood flooring. Sampling procedures for evaluation of conformity
- BS-EN-14915 - Solid wood panelling and cladding. Characteristics, requirements and marking
- BS-EN-15146 - Solid softwood panelling and cladding. Machined profiles without tongue and groove
- BS-EN-1533 - Wood flooring. Determination of bending strength under static load. Test methods
- BS-EN-1534 - Wood flooring and parquet. Determination of resistance to indentation. Test method
- BS-EN-15534-1 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC))
- BS-EN-15534-4 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC))
- BS-EN-15534-5 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC))
- BS-EN-15534-6 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC))
- BS-EN-17456 - Wood flooring and parquet. Determination of top layer delamination of multilayer elements. Test method
- BS-EN-1910 - Wood flooring and wood panelling and cladding. Determination of dimensional stability
- BS-EN-1910-TC - Tracked Changes. Wood flooring and wood panelling and cladding. Determination of dimensional stability
- BS-ISO-24337 - Laminate floor coverings. Determination of geometrical characteristics
- BS-ISO-4556 - Wood raw parquet elements. General characteristics
- BS-ISO-4561 - Wood raw parquets elements. Classification
- BS-ISO-4562 - Wood parquet strips. Classification
- BS-ISO-5323 - Wood flooring and parquet. Vocabulary
- DD-CEN-13307-2 - Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses
- DD-CEN-15676 - Wood flooring. Slip resistance. Pendulum test
- DD-CEN-15717 - Parquet flooring. General guideline for installation
- DD-ENV-13696 - Wood and parquet flooring. Determination of elasticity and resistance to wear
- PD-CEN-15314 - Durability of wood and wood-based products. Quantitative determination of quaternary ammonium compounds in wood
- PD-CEN-16816 - End use performance of wood products. Utilisation and improvement of existing methods to estimate service life
- PD-CEN-17158 - Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)). Determination of particle size of lignocellosic material
- PD-CEN-17810 - Durability of wood and wood-based products. Interpretation document for standards related to efficacy requirements and specifications of wood preservatives
- PD-ISO-21141 - Timber structures. Timber connections and assemblies. Determination of yield and ultimate characteristics and ductility from test data
ISO:
- ISO-1072 - Solid wood parquet -- General characteristics
- ISO-1324 - Solid wood parquet -- Classification of oak strips
- ISO-2036 - Wood for manufacture of wood flooring -- Symbols for marking according to species
- ISO-24337 - Laminate floor coverings - Determination of geometrical characteristics
- ISO-2457 - Solid wood parquet -- Classification of beech strips
- ISO-3397 - Broadleaved wood raw parquet blocks -- General characteristics
- ISO-3398 - Broadleaved wood raw parquet blocks -- Classification of oak parquet blocks
- ISO-3399 - Broadleaved wood raw parquet blocks -- Classification of beech parquet blocks
- ISO-3810 - Floor tiles of agglomerated cork -- Methods of test
- ISO-4556 - Wood raw parquet elements - General characteristics
- ISO-4561 - Wood raw parquets elements - Classification
- ISO-4562 - Wood parquet strips - Classification
- ISO-5320 - Solid wood parquet -- Classification of fir and spruce strips
- ISO-5321 - Coniferous wood raw parquet blocks -- General characteristics
- ISO-5323 - Wood flooring and parquet - Vocabulary
- ISO-5326 - Solid wood paving blocks -- Hardwood paving blocks -- Quality requirements
- ISO-5327 - Solid wood paving blocks -- General characteristics
- ISO-5328 - Solid wood paving blocks -- Softwood paving blocks -- Quality requirements
- ISO-5329 - Solid wood paving blocks -- Vocabulary
- ISO-5333 - Coniferous wood raw parquet blocks -- Classification of fir and spruce parquet blocks
- ISO-5334 - Solid wood parquet -- Classification of maritime pine strips
- ISO-631 - Mosaic parquet panels -- General characteristics
Other SDOs:
- CEN-17158 - Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material
- DIN-EN-13226 - Wood Flooring - Solid Parquet Elements With Grooves &/or Tongues
- DIN-EN-13227 - Wood Flooring, Solid Lamparquet Products
- DIN-EN-13228 - Wood Flooring, Solid Wood Overlay Flooring Elements Including Blocks With an Interlock
- DIN-EN-13307-1 - Part 1: Requirements, Timber Blanks & Semi-Finished Profiles for Non-Structural Uses
- DIN-EN-13442 - Wood flooring and wood panelling and cladding - Determination of the resistance to chemical agents; German version EN 13442:2013
- DIN-EN-13629 - Wood flooring - Solid individual and pre-assembled hardwood boards
- DIN-EN-13647 - Wood flooring and wood panelling and cladding - Determination of geometrical characteristics
- DIN-EN-14279 - Laminated Veneer Lumber (Lvl) - Definitions, Classification & Specifications
- DIN-EN-14342 - Wood flooring - Characteristics, evaluation of conformity and marking; German version EN 14342:2013
- DIN-EN-14354 - Wood-Based Panels, Wood Venner Floor Covering
- DIN-EN-14374 - Timber Structures, Structural Laminated Veneer Lumber, Requirements
- DIN-EN-14519 - Solid Softwood Panelling & Cladding - Machined Profiles With Tongue & Groove
- DIN-EN-14761 - Wood Flooring - Solid Wood Parquet - Vertical Finger, Wide Finger & Module Brick
- DIN-EN-14762 - Wood Flooring - Sampling Procedures for Evaluation of Conformity
- DIN-EN-14915 - Solid wood panelling and cladding - Characteristics, requirements and marking; German version EN 14915:2013+A1:2017
- DIN-EN-15146 - Solid Softwood Panelling & Cladding - Machined Profiles Without Tongue & Groove
- EN-12465 - Wood Poles for Overhead Lines, Durability Requirements
- EN-12509 - Timber Poles for Overhead Lines, Test Methods - Determination of Modulus of Elasticity
- EN-13226 - Wood Flooring - Solid Parquet Elements With Grooves &/or Tongues
- EN-13227 - Wood flooring - Solid lamparquet products
- EN-13228 - Wood Flooring, Solid Wood Overlay Flooring Elements Including Blocks With an Interlock
- EN-13307-1 - Part 1: Requirements, Timber Blanks & Semi-Finished Profiles for Non-Structural Uses
- EN-13442 - Wood flooring and wood panelling and cladding - Determination of the resistance to chemical agents
- EN-13489 - Wood-flooring and parquet - Multi-layer parquet elements
- EN-13629 - Wood flooring - Solid individual and pre-assembled hardwood boards
- EN-13647 - Wood flooring and wood panelling and cladding - Determination of geometrical characteristics
- EN-13696 - Wood Flooring - Test Methods To Determine Elasticity & Resistance To Wear & Impact Res
- EN-13756 - Wood flooring - Terminology
- EN-13990 - Wood Flooring, Solid Softwood Floor Boards
- EN-14279 - Laminated Veneer Lumber (Lvl) - Definitions, Classification & Specifications
- EN-14342 - Wood flooring - Characteristics, evaluation of conformity and marking
- EN-14354 - Wood-based panels - Wood veneer floor coverings
- EN-14374 - Timber Structures, Structural Laminated Veneer Lumber, Requirements
- EN-14519 - Solid Softwood Panelling & Cladding - Machined Profiles With Tongue & Groove
- EN-14761 - Wood Flooring, Solid Wood Parquet, Vertical Finger, Wide Finger & Module Brick
- EN-14762 - Wood Flooring - Sampling Procedures for Evaluation of Conformity
- EN-14915 - Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
- EN-15146 - Solid Softwood Panelling & Cladding - Machined Profiles Without Tongue & Groove
- EN-1533 - Wood Flooring - Determination of Bending Strength Under Static Load - Test Methods
- EN-15534-1 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
- EN-15534-4 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
- EN-15534-5 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
- EN-15534-6 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
- EN-1910 - Wood flooring and wood panelling and cladding - Determination of dimensional stability
- SIS-CEN/TR-16816 - End use performance of wood products - Utilisation and improvement of existing methods to estimate service life
- SIS-CEN/TR-17810 - Durability of wood and wood-based products - Interpretation document for standards related to efficacy requirements and specifications of wood preservatives
- SIS-CEN/TS-16818 - Durability of wood and wood-based products - Moisture dynamics of wood and wood-based products
- SIS-CEN/TS-17158 - Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material
- SS-EN-12465 - Wood poles for overhead lines - Durability requirements
- SS-EN-12479 - Wood poles for overhead lines - Sizes - Methods of measurement and permissible deviations
- SS-EN-12509 - Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content
- SS-EN-12510 - Wood poles for overhead lines - Strength grading criteria
- SS-EN-12511 - Wood poles for overhead lines - Determination of characteristic values
- SS-EN-13226 - Wood flooring - Solid parquet elements with grooves and/or tongues
- SS-EN-13227 - Wood flooring - Solid lamparquet products
- SS-EN-13228 - Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system
- SS-EN-13307-1 - Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements
- SS-EN-13329 - Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
- SS-EN-13442 - Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents
- SS-EN-13488 - Wood flooring - Mosaic parquet elements
- SS-EN-13489 - Wood-flooring and parquet - Multi-layer parquet elements
- SS-EN-13629 - Wood flooring - Solid individual and pre-assembled hardwood boards
- SS-EN-13647 - Wood flooring and wood panelling and cladding - Determination of geometrical characteristics
- SS-EN-13696 - Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
- SS-EN-13756 - Wood flooring and parquet - Terminology
- SS-EN-13990 - Wood flooring - Solid softwood floor boards
- SS-EN-14080 - Timber structures - Glued laminated timber and glued solid timber - Requirements
- SS-EN-14229 - Structural timber - Wood poles for overhead lines
- SS-EN-14279 - Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
- SS-EN-14342 - Wood flooring - Characteristics, evaluation of conformity and marking
- SS-EN-14354 - Wood-based panels - Wood veneer floor coverings
- SS-EN-14374 - Timber structures - Structural laminated veneer lumber - Requirements
- SS-EN-14519 - Solid softwood panelling and cladding - Machined profiles with tongue and groove
- SS-EN-14761 - Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick
- SS-EN-14762 - Wood flooring - Sampling procedures for evaluation of conformity
- SS-EN-14915 - Solid wood panelling and cladding - Characteristics, requirements and marking
- SS-EN-15146 - Solid softwood panelling and cladding - Machined profiles without tongue and groove
- SS-EN-1533 - Wood flooring - Determination of bending strength under static load - Test methods
- SS-EN-1534 - Wood flooring and parquet - Determination of resistance to indentation - Test method
- SS-EN-15534-1 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
- SS-EN-15534-4 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
- SS-EN-15534-5 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
- SS-EN-15534-6 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
- SS-EN-17456 - Wood flooring and parquet - Determination of top layer delamination of multilayer elements - Test method
- SS-EN-1910 - Wood flooring and wood panelling and cladding - Determination of dimensional stability
- SS-EN-ISO-3543 - Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000)