Document Center List of Standards on Stainless Steels Including Alloyed Steels, Corrosion-Resistant Steels, Heat-Resisting Steels, Etc.
ICS Code 77.140.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1011 - Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
- ASTM-A1016 - Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
- ASTM-A1018 - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
- ASTM-A1022 - Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
- ASTM-A1028 - Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils (Withdrawn 2021)
- ASTM-A1041 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten (Withdrawn 2013)
- ASTM-A1049 - Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
- ASTM-A1077 - Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
- ASTM-A1089 - Standard Specification for Highly Loaded Anti-Friction Bearing Steel
- ASTM-A167 - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip (Withdrawn 2014)
- ASTM-A176 - Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip (Withdrawn 2015)
- ASTM-A262 - Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- ASTM-A276 - Standard Specification for Stainless Steel Bars and Shapes
- ASTM-A314 - Standard Specification for Stainless Steel Billets and Bars for Forging
- ASTM-A380 - Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
- ASTM-A478 - Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
- ASTM-A484 - Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
- ASTM-A485 - Standard Specification for High Hardenability Antifriction Bearing Steel
- ASTM-A493 - Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
- ASTM-A601 - Standard Specification for Electrolytic Manganese Metal
- ASTM-A651 - Specification for Stainless Steel Water-DWV Tube (Withdrawn 1986)
- ASTM-A665 - Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 23G048, 27G053, 30G058, and 35G066 (Withdrawn 1987)
- ASTM-A665M - Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 23G106M, 27G117M, 30G128M, and 35G146M (Withdrawn 1987)
- ASTM-A666 - Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
- ASTM-A693 - Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM-A725 - Specification for Flat-Rolled, Grain-Oriented, Silicon Iron, Electrical Steel, Fully Processed, Types 27H076, 30H083, 35H094 (Withdrawn 1988)
- ASTM-A725M - Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 27H168m, 30H183m, 35H207m (Withdrawn 1988)
- ASTM-A756 - Standard Specification for Stainless Anti-Friction Bearing Steel
- ASTM-A763 - Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
- ASTM-A774 - Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
- ASTM-A793 - Standard Specification for Rolled Floor Plate, Stainless Steel (Withdrawn 2023)
- ASTM-A831 - Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components (Withdrawn 2005)
- ASTM-A843 - Specification for Flat-Rolled, Grain-Oriented, High Permeability, Silicon-Iron Electrical Steel, Fully Processed, Types 27P066, 30P070, 35P076 (Withdrawn 1987)
- ASTM-A892 - Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
- ASTM-A920 - Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
- ASTM-A921 - Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
- ASTM-A946 - Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service (Withdrawn 2012)
- ASTM-A952 - Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
- ASTM-A959 - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
- ASTM-A960 - Standard Specification for Common Requirements for Wrought Steel Piping Fittings
- ASTM-A961 - Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
- ASTM-A965 - Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
- ASTM-A967 - Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
- ASTM-B254 - Standard Practice for Preparation of and Electroplating on Stainless Steel
- ASTM-B872 - Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
- ASTM-E1086 - Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
- ASTM-E327 - Test Method for Optical Emission Spectrometric Analysis of Stainless Type 18-8 Steels by the Point-To-Plane Technique (Withdrawn 1999)
- ASTM-E572 - Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
- ASTM-F2328 - Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
- ASTM-F2328M - Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
- ASTM-F2581 - Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
- ASTM-F55 - Specification for Stainless Steel Bar and Wire for Surgical Implants (Withdrawn 1989)
- ASTM-F56 - Specification for Stainless Steel Sheet and Strip for Surgical Implants (Withdrawn 1989)
- ASTM-G108 - Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
- ASTM-G146 - Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
- ASTM-G150 - Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys
BSI:
- BIP-3045 - Stainless steels and delivery conditions CD-ROM
- BS-1407 - Specification for high carbon bright steel (silver steel)
- BS-1449-2 - Steel plate, sheet and strip. Specification for stainless and heat-resisting steel plate, sheet and strip
- BS-1501-2 - Steels for pressure purposes. Specification for alloy steels: plates
- BS-2S-144 - Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)
- BS-4S-99 - Specification for 2.5% nickel-chromium-molybdenum (high carbon) steel billets, bars, forgings and parts (1230-1420 MPa: limiting ruling section 150 mm)
- BS-5194-1 - Surgical instruments
- BS-970-1 - Specification for wrought steels for mechanical and allied engineering purposes
- BS-A-274 - Specification for procurement of alloy steel bolts, metric, with a minimum tensile strength of 1100 MPa
- BS-EN-10028-7 - Flat products made of steels for pressure purposes
- BS-EN-10088-1 - Stainless steels
- BS-EN-10088-1-TC - Tracked Changes. Stainless steels
- BS-EN-10088-2 - Stainless steels
- BS-EN-10088-3 - Stainless steels
- BS-EN-10088-3-TC - Tracked Changes. Stainless steels
- BS-EN-10088-4 - Stainless steels
- BS-EN-10088-5 - Stainless steels
- BS-EN-10250-2 - Open die steel forgings for general engineering purposes
- BS-EN-10250-2-TC - Tracked Changes. Open die steel forgings for general engineering purposes
- BS-EN-10250-3 - Open die steel forgings for general engineering purposes
- BS-EN-10250-4 - Open die steel forgings for general engineering purposes
- BS-EN-10250-4-TC - Tracked Changes. Open die steel forgings for general engineering purposes
- BS-EN-10253-3 - Butt-welding pipe fittings
- BS-EN-10253-4 - Butt-welding pipe fittings
- BS-EN-10258 - Cold-Rolled Stainless Steel Narrow Strip & Cut Lengths.
- BS-EN-10259 - Cold-Rolled Stainless & Heat Resisting Wide Strip & Plate/Sheet, Tolerances on Dimensi
- BS-EN-10263-5 - Steel rod, bars and wire for cold heading and cold extrusion
- BS-EN-10264-4 - Steel wire and wire products. Steel wire for ropes
- BS-EN-10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- BS-EN-10272 - Stainless steel bars for pressure purposes
- BS-EN-10277-2 - Bright steel products. Technical delivery conditions
- BS-EN-10277-4 - Bright steel products. Technical delivery conditions. Case hardening steels
- BS-EN-10277-5 - Bright steel products. Technical delivery conditions. Steels for quenching and tempering
- BS-EN-10283 - Corrosion resistant steel castings
- BS-EN-10315 - Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique
- BS-EN-ISO-683-1 - Heat-treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-17 - Heat-treated steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-17-TC - Tracked Changes. Heat-treated steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-2 - Heat-treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-3 - Heat-treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-3-TC - Tracked Changes. Heat-treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-4 - Heat-treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-683-5 - Heat treatable steels, alloy steels and free-cutting steels
- BS-EN-ISO-7153-1 - Surgical instruments. Materials
- BS-EN-ISO-7153-1-TC - Tracked Changes. Surgical instruments. Materials
- BS-EN-ISO-9443 - Surface quality classes for hot-rolled bars and wire rod
- BS-EN-ISO-9444-2 - Continuously hot-rolled stainless steel. Tolerances on dimensions and form
- BS-EN-ISO-9445 - Continuously Cold-Rolled Stainless Steel Narrow Strip, Plate/Sheet & Cut Lengths, Tole
- BS-EN-ISO-9445-1 - Continuously cold-rolled stainless steel. Tolerances on dimensions and form
- BS-EN-ISO-9445-2 - Continuously cold-rolled stainless steel. Tolerances on dimensions and form
- BS-ISO-11972 - Corrosion-resistant cast steels for general applications
- BS-ISO-11973 - Heat-resistant cast steels and alloys for general applications
- BS-ISO-11973-TC - Tracked Changes. Heat-resistant cast steels and alloys for general applications.
- BS-ISO-15510 - Stainless steels. Chemical composition
- BS-ISO-16143-1 - Stainless steels for general purposes
- BS-ISO-16143-2 - Stainless steels for general purposes
- BS-ISO-16143-3 - Stainless steels for general purposes
- BS-ISO-16143-4 - Stainless steels for general purposes
- BS-ISO-18632 - Alloyed steels. Determination of manganese. Potentiometric or visual titration method
- BS-ISO-18632-TC - Tracked Changes. Alloyed steels. Determination of manganese. Potentiometric or visual titration method
- BS-ISO-19272 - Low alloyed steel. Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu. Glow discharge optical emission spectrometry (routine method)
- BS-ISO-4954 - Steels for cold heading and cold extruding
- BS-ISO-4954-1 - Steels for cold heading and cold extruding. Technical delivery conditions
- BS-ISO-4954-1-TC - Tracked Changes. Steels for cold heading and cold extruding. Technical delivery conditions
- BS-ISO-4954-2 - Steels for cold heading and cold extruding. Technical delivery conditions
- BS-ISO-4954-2-TC - Tracked Changes. Steels for cold heading and cold extruding. Technical delivery conditions
- BS-ISO-683-5 - Heat treatable steels, alloy steels and free-cutting steels
- BS-ISO-683-6 - Heat-treatable steels, alloy steels and free-cutting steels
- BS-ISO-683-7 - Heat-treatable steels, alloy steels and free-cutting steels
- DD-ENV-1090-6 - Execution of steel structures
- DD-ISO-15510 - Stainless steels. Chemical composition
- PD-970 - Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels
ISO:
- ISO-11692 - Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
- ISO-11972 - Corrosion-resistant cast steels for general applications
- ISO-11973 - Heat-resistant cast steels and alloys for general applications
- ISO-15510 - Stainless steels - Chemical composition
- ISO-16143-1 - Stainless steels for general purposes - Part 1: Corrosion-resistant flat products
- ISO-16143-2 - Stainless steels for general purposes - Part 2: Corrosion-resistant semi-finished products, bars, rods and sections
- ISO-16143-3 - Stainless steels for general purposes - Part 3: Wire
- ISO-16143-4 - Stainless steels for general purposes - Part 4: Bright products
- ISO-17650 - Low-alloyed steel - Determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn - Inductively coupled plasma optical emission spectrometric method
- ISO-18632 - Alloyed steels - Determination of manganese - Potentiometric or visual titration method
- ISO-19272 - Low alloyed steel - Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method)
- ISO-4952 - Structural steels with improved atmospheric corrosion resistance
- ISO-4954 - Steels for cold heading and cold extruding
- ISO-4954-1 - Steels for cold heading and cold extruding - Technical delivery conditions - Part 1: Non-alloy and alloy steels
- ISO-4954-2 - Steels for cold heading and cold extruding - Technical delivery conditions - Part 2: Stainless steels
- ISO-4955 - Heat-resistant steels
- ISO-5949 - Tool steels and bearing steels - Micrographic method for assessing the distribution of carbides using reference photomicrographs
- ISO-630-5 - Structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
- ISO-683-1 - Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering
- ISO-683-10 - Heat-treatable steels, alloy steels and free-cutting steels - Part 10 : Wrought nitriding steels
- ISO-683-11 - Heat-treatable steels, alloy steels and free-cutting steels - Part 11: Case-hardening steels
- ISO-683-15 - Heat-treatable steels, alloy steels and free-cutting steels - Part 15: Valve steels for internal combustion engines
- ISO-683-17 - Heat-treatable steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels
- ISO-683-18 - Heat-treatable steels, alloy steels and free-cutting steels - Part 18: Bright steel products
- ISO-683-2 - Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering
- ISO-683-3 - Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels
- ISO-683-4 - Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels
- ISO-683-5 - Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels
- ISO-683-6 - Heat-treatable steels, alloy steels and free-cutting steels - Part 6: Hot-rolled steels for quenched and tempered springs
- ISO-683-7 - Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels
- ISO-683-9 - Heat-treatable steels, alloy steels and free-cutting steels - Part 9 : Wrought free-cutting steels
- ISO-7153-1 - Surgical instruments - Materials - Part 1: Metals
- ISO-7153-1-1 - Amendment 1 to ISO 7153-1:1991
- ISO-9443 - Surface quality classes for hot-rolled bars and wire rod
- ISO-9444 - Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths - Tolerances on dimensions and form
- ISO-9444-1 - Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths
- ISO-9444-2 - Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate
- ISO-9445 - Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form
- ISO-9445-1 - Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths
- ISO-9445-2 - Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet
Other SDOs:
- DIN-5512-3 - Stainless Steel Flats for Use in Rail Vehicle Construction
- DIN-EN-10088-1 - Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2014
- DIN-EN-10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes; German version EN 10088-2:2014
- DIN-EN-10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes; German version EN 10088-3:2014
- DIN-EN-10264-4 - Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
- DIN-EN-10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties; German version EN 10269:2013
- DIN-EN-10315 - Routine Method for Analysis of High Alloy Steel Steel by X-Ray Fluorescence Spectromet
- DIN-EN-ISO-9445 - Continuously Cold-Rolled Stainless Steel Narrow Strip, Wide Strip, Plate/Sheet & Cut
- EN-10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
- EN-10088-1 - Stainless steels - Part 1: List of stainless steels
- EN-10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- EN-10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- EN-10088-4 - Part 4: Technical Delivery Conditions for Sheet/Plate and Strip of Corrosion Resisting S
- EN-10088-5 - Part 5: Technical Delivery Conditions for Bars, Rods, Wire, Sections and Bright Product
- EN-10205 - Cold reduced tinmill products - Blackplate
- EN-10250-4 - Part 4: Stainless Steels, Open Die Steel Forgings for General Engineering Purposes
- EN-10253-3 - Butt-Welding Pipe Fittings, Wrought Austenitic & AUSTENITIC-Ferritic (Duplex) Stainles
- EN-10253-4 - Part 4: Wrought Austenitic & AUSTENITIC-Ferritic (Duplex) Stainless Steels With Specif
- EN-10264-4 - Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
- EN-10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- EN-10272 - Stainless steel bars for pressure purposes
- EN-10277-2 - Part 2: Steels for General Engineering Purposes, Bright Steel Products - Technical Del
- EN-10277-4 - Part 4: Case-Hardening Steels, Bright Steel Products - Technical Delivery Conditions
- EN-10277-5 - Part 5: Steels for Quenching & Tempering, Bright Steel Products - Technical Delivery C
- EN-10283 - Corrosion Resistant Steel Castings
- EN-10315 - Routine Method for Analysis of High Alloy Steel by X-Ray Fluorescence Spectrometry (Xr
- EN-ISO-683-17 - Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels
- EN-ISO-683-2 - Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering
- EN-ISO-683-3 - Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels
- EN-ISO-683-4 - Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels
- EN-ISO-7153-1 - Surgical instruments - Materials - Part 1: Metals
- EN-ISO-9443 - Surface quality classes for hot-rolled bars and wire rod
- EN-ISO-9444-2 - Continuously Hot-Rolled Stainless Steel, Tolerances on Dimensions & Form, Wide Strip &
- EN-ISO-9445 - Continuously Cold-Rolled Stainless Steel Narrow Strip, Wide Strip, Plate/Sheet & Cut
- EN-ISO-9445-1 - Part 1: Narrow Strip & Cut Lengths, Continuously Cold-Rolled Stainless Steel - Toleran
- EN-ISO-9445-2 - Part 2: Wide Strip & Plate/Sheet, Continuously Cold-Rolled Stainless Steel - Tolerance
- JIS-G-0573 - Method of 65 per cent nitric acid test for stainless steels
- JIS-G-0573-AM1 - Method of 65 % nitric acid test for stainless steels (Amendment 1)
- JIS-G-0575 - Method of copper sulfate-sulfuric acid test for stainless steels
- JIS-G-0575-AM1 - Method of copper sulfate-sulfuric acid test for stainless steels (Amendment 1)
- JIS-G-0578 - Method of ferric chloride tests for stainless steels
- JIS-G-0578-AM1 - Method of ferric chloride tests for stainless steels (Amendment 1)
- JIS-G-0579-AM1 - Method of anodic polarization curves measurement for stainless steels (Amendment 1)
- JIS-G-0591 - Method of sulfuric acid test for stainless steels
- JIS-G-0591-AM1 - Method of sulfuric acid test for stainless steels (Amendment 1)
- JIS-G-0802 - Ultrasonic testing of stainless steel plates
- JIS-G-3103 - Carbon steel and molybdenum alloy steel plates for boilers and pressure vessels
- JIS-G-3120 - Manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates quenched and tempered for pressure vessels
- JIS-G-3447 - Stainless steel sanitary pipes
- JIS-G-3447-AM1 - Stainless steel sanitary pipes (Amendment 1)
- JIS-G-3447 JAPANESE - Japanese Language - STAINLESS STEEL SANITARY PIPES
- JIS-G-3448 - Light gauge stainless steel tubes for ordinary piping
- JIS-G-3468 - Large diameter welded stainless steel pipes
- JIS-G-3509-1 - Low-alloyed steels for cold heading -- Part 1: Wire rods
- JIS-G-3509-2 - Low-alloyed steels for cold heading -- Part 2: Wires
- JIS-G-3602 - Nickel and nickel alloy clad steels
- JIS-G-3603 - Titanium clad steels
- JIS-G-3604 - Copper and copper alloy clad steels
- JIS-G-4052 - Structural steels with specified hardenability bands
- JIS-G-4053 - Low-alloyed steels for machine structural use
- JIS-G-4053-AM1 - Low-alloyed steels for machine structural use (Amendment 1) (Foreign Standard)
- JIS-G-4311/A1 - Amendment 1 for JIS-G-4311, Heat-Resisting Steel Bars
- JIS-Z-3322 - Classification and testing methods for weld metal of stainless steel overlay welding with strip electrode
- SIS-CEN/CR-10320 - Optical emission analysis of low alloy steels (routine method) - Method for determination of C, Si, S, P, Mn, Cr, Ni and Cu
- SIS-EN-10205 - Cold reduced tinmill products - Blackplate
- SS-219711 - Stainless steels - Tubes for pressure purposes. Test category I Technical delivery requirements
- SS-219713 - Stainless steels - Tubes for pressure purposes. Test category II- Technical delivery requirements
- SS-EN-10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
- SS-EN-10088-1 - Stainless steels - Part 1: List of stainless steels
- SS-EN-10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- SS-EN-10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- SS-EN-10088-4 - Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
- SS-EN-10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
- SS-EN-10228-4 - Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
- SS-EN-10250-4 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels
- SS-EN-10253-2 - Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
- SS-EN-10253-3 - Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
- SS-EN-10253-4 - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
- SS-EN-10264-4 - Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
- SS-EN-10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- SS-EN-10269-AM1 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
- SS-EN-10272 - Stainless steel bars for pressure purposes
- SS-EN-10277 - Bright steel products - Technical delivery conditions
- SS-EN-10277-1 - Bright steel products - Technical delivery conditions - Part 1: General
- SS-EN-10277-2 - Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
- SS-EN-10277-3 - Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels
- SS-EN-10277-4 - Bright steel products - Technical delivery conditions - Part 4: Case hardening steels
- SS-EN-10277-5 - Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
- SS-EN-10283 - Corrosion resistant steel castings
- SS-EN-10315 - Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique
- SS-EN-ISO-10088-1 - Stainless steels - Part 1: List of stainless steels
- SS-EN-ISO-10250-4 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels
- SS-EN-ISO-10360-6 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
- SS-EN-ISO-11562 - Geometrical product specifications (GPS) - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996/Cor 1:1998)
- SS-EN-ISO-18286 - Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008)
- SS-EN-ISO-20361 - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015)
- SS-EN-ISO-683-1 - Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016)
- SS-EN-ISO-683-17 - Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2023)
- SS-EN-ISO-683-2 - Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016)
- SS-EN-ISO-683-3 - Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2022)
- SS-EN-ISO-683-4 - Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels (ISO 683-4:2016)
- SS-EN-ISO-683-5 - Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels (ISO 683-5:2017)
- SS-EN-ISO-7153-1 - Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016)
- SS-EN-ISO-9443 - Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
- SS-EN-ISO-9444-2 - Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009)
- SS-EN-ISO-9445 - Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form (ISO 9445:2002)
- SS-EN-ISO-9445-1 - Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)
- SS-EN-ISO-9445-2 - Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)
- SS-ISO-15510 - Stainless steels - Chemical composition (ISO 15510:2014, IDT)
- SS-ISO-18632 - Alloyed steels - Determination of manganese - Potentiometric or visual titration method (ISO 18632:2018, IDT)
- UNE-EN-10088-1 - Stainless steels - Part 1: List of stainless steels
- UNE-EN-10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- UNE-EN-10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- UNE-EN-ISO-7153-1 - Surgical instruments - Materials - Part 1: Metals