Document Center List of Standards on Chemical Analysis Including Analysis Of Gases And Surface Chemical Analysis
ICS Code 71.040.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-B880 - Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
- ASTM-C1324 - Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- ASTM-C1733 - Standard Test Method for Distribution Coefficients of Inorganic Species by Batch Method
- ASTM-C699 - Method for Chemical, Mass Spectrometric, and Spectrochemical Analysis of, and Physical Tests on Beryllium Oxide Powder (Withdrawn 1992)
- ASTM-D1137 - Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer (Withdrawn 1981)
- ASTM-D1339 - Methods of Test for Sulfite Ion in Water (Withdrawn 1988)
- ASTM-D1396 - Standard Test Methods for Chemical Analysis of Poly(Vinyl Butyral) (Withdrawn 2007)
- ASTM-D1428 - Methods of Test for Sodium and Potassium in Water and Water-Formed Deposits by Flame Photometry (Withdrawn 1988)
- ASTM-D1553 - Method for Analysis of Graphites Used as Lubricants (Withdrawn 1990)
- ASTM-D1608 - Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures) (Withdrawn 2023)
- ASTM-D1728 - Method of Test for Phthalate Ester Color of High-Gravity Glycerin (Withdrawn 1989)
- ASTM-D1839 - Standard Test Method for Amyl Nitrate in Diesel Fuels (Withdrawn 2019)
- ASTM-D2038 - Test for Radioactive Barium in Water (Withdrawn 1987)
- ASTM-D2039 - Method of Test for Radioactive Manganese in Industrial Water and Industrial Waste Water (Withdrawn 1987)
- ASTM-D2408 - Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Amino-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)
- ASTM-D2409 - Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Vinyl-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)
- ASTM-D2410 - Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Chrome Complexes, for Plastic Laminates (Withdrawn 1988)
- ASTM-D2577 - Method of Test for Radioactive Cesium in Water, Industrial Water and Industrial Waste Water (Withdrawn 1987)
- ASTM-D2650 - Standard Test Method for Chemical Composition of Gases by Mass Spectrometry
- ASTM-D2660 - Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Acrylic-Silane-Type Finishes, for Plastic Laminates (Withdrawn 1988)
- ASTM-D2742 - Methods for Chemical Analysis of Tribasic Lead Phosphosilicate (Withdrawn 1988)
- ASTM-D2747 - Method of Test for Trace Quantities of Total Sulfur in Volatile Organic Liquids (Oxy-Hydrogen Combustion Method) (Withdrawn 1985)
- ASTM-D2780 - Standard Test Method for Solubility of Fixed Gases in Liquids (Withdrawn 2010)
- ASTM-D2785 - Method of Test for Trace Quantities of Total Sulfur (Wickbold and Beckman Combustion Apparatus) (Withdrawn 1987)
- ASTM-D2820 - C1 Through C5 Hydrocarbons in the Atmosphere by Gas Chormatography, Standard Test Method F
- ASTM-D2883 - Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials (Withdrawn 2016)
- ASTM-D2999 - Test Method for Monopentaerythritol in Commercial Pentaerythritol (Withdrawn 1989)
- ASTM-D3008 - Test Method for Resin Acids in Rosin by Gas Chromatography (Withdrawn 1997)
- ASTM-D3315 - Method of Test for Radioactive Zirconium in Water (Withdrawn 1987)
- ASTM-D3530 - Standard Test Method for Volatiles Content of Composite Material Prepreg
- ASTM-D3539 - Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer (Withdrawn 2015)
- ASTM-D3592 - Recommended Practice for Determining Molecular Weight by Vapor Pressure Osmometry (Withdrawn 1987)
- ASTM-D3601 - Standard Test Method for Foam In Aqueous Media (Bottle Test) (Withdrawn 2013)
- ASTM-D3621 - Practice for Determination of Water in Acetate Esters (Withdrawn 1988)
- ASTM-D4229 - Method for Conducting Static Acute Toxicity Tests on Wast-Waters With Daphnia
- ASTM-D4307 - Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
- ASTM-D4327 - Standard Test Method for Anions in Water by Suppressed Ion Chromatography
- ASTM-D4331 - Practice for Measuring Effectiveness of Dedusting Agents for Powdered Chemiclas (Withdrawn 1988)
- ASTM-D4478 - Test Method for Oxygen Update (Withdrawn 1994)
- ASTM-D4588 - Guide for Analysis of P-Xylene (Withdrawn 1991)
- ASTM-D4638 - Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
- ASTM-D4739 - Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
- ASTM-D5074 - Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
- ASTM-D5085 - Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Suppressed Ion Chromatography
- ASTM-D5086 - Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
- ASTM-D5166 - Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven (Withdrawn 2022)
- ASTM-D5180 - Standard Test Method for Quantitative Test for Turbidity in Clear Liquids (Withdrawn 2007)
- ASTM-D5544 - Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
- ASTM-D5788 - Standard Guide for Spiking Organics into Aqueous Samples
- ASTM-D5789 - Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Organic Constituents (Withdrawn 2002)
- ASTM-D5808 - Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
- ASTM-D5902 - Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
- ASTM-D5932 - Standard Test Method for Determination of 2,4-Toluene Di
iso cyanate (2,4-TDI) and 2,6-Toluene Diiso cyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace - ASTM-D5984 - Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
- ASTM-D6019 - Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
- ASTM-D6069 - Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection (Withdrawn 2015)
- ASTM-D6143 - Standard Test Method for Iron Content of Bisphenol A (4,4
′ - Isopropylidenediphenol) - ASTM-D6174 - Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration (Withdrawn 2015)
- ASTM-D6328 - Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
- ASTM-D6348 - Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
- ASTM-D6656 - Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
- ASTM-D6808 - Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
- ASTM-D6827 - Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
- ASTM-D6839 - Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography
- ASTM-D6843 - Standard Test Method for Silanes Used in Rubber Formulations
(bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC) - ASTM-D6854 - Standard Test Method for Silica-Oil Absorption Number (OAN)
- ASTM-D6956 - Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
- ASTM-D7318 - Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
- ASTM-D7375 - Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration (Withdrawn 2017)
- ASTM-D7459 - Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
- ASTM-D7482 - Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
- ASTM-D7579 - Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
- ASTM-D7728 - Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance
- ASTM-D7902 - Standard Terminology for Radiochemical Analyses
- ASTM-D7959 - Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip
- ASTM-D8063 - Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration
- ASTM-D811 - Methods of Chemical Analysis for Metals in New and Used Lubricating Oils (Withdrawn 1987)
- ASTM-E1131 - Standard Test Method for Compositional Analysis by Thermogravimetry
- ASTM-E1385 - Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Steam Distillation (Withdrawn 2009)
- ASTM-E1386 - Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
- ASTM-E1601 - Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
- ASTM-E1641 - Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
- ASTM-E1863 - Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
- ASTM-E1868 - Standard Test Methods for Loss-On-Drying by Thermogravimetry
- ASTM-E1877 - Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
- ASTM-E1899 - Standard Test Method for Hydroxyl Groups Using Reaction with
p -Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide - ASTM-E191 - Standard Specification for Apparatus For Microdetermination of Carbon and
Hydrogen in Organic and Organo-Metallic Compounds (Withdrawn 2024) - ASTM-E1950 - Standard Practice for Reporting Results from Methods of Chemical Analysis (Withdrawn 2023)
- ASTM-E2027 - Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials
- ASTM-E203 - Standard Test Method for Water Using Volumetric Karl Fischer Titration
- ASTM-E204 - Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index (Withdrawn 2014)
- ASTM-E2160 - Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM-E2165 - Standard Practice for Establishing an Uncertainty Budget for the Chemical Analysis of Metals, Ores, and Related Materials (Withdrawn 2007)
- ASTM-E222 - Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
- ASTM-E2313 - Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
- ASTM-E2326 - Standard Practice for Education and Training of Seized-Drug Analysts (Withdrawn 2023)
- ASTM-E2330 - Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
- ASTM-E234 - Standard Test Method for Total Bromine Number of Unsaturated Aliphatic Chemicals (Withdrawn 2008)
- ASTM-E2403 - Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
- ASTM-E2437 - Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2014)
- ASTM-E2438 - Standard Practice for Implementing Standard Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2014)
- ASTM-E2458 - Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
- ASTM-E2469 - Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography
- ASTM-E2489 - Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
- ASTM-E2551 - Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
- ASTM-E256 - Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition (Withdrawn 2018)
- ASTM-E271 - Standard Test Methods for Analysis of Aqueous Hydrofluoric Acid (Withdrawn 2003)
- ASTM-E2857 - Standard Guide for Validating Analytical Methods
- ASTM-E2882 - Standard Guide for Analysis of Clandestine Drug Laboratory Evidence
- ASTM-E2927 - Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
- ASTM-E2958 - Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
- ASTM-E3007 - Standard Practice for Selection and Use of Kinetic Reference Values in the Study of Decomposition Reactions by Thermogravimetry
- ASTM-E3063 - Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
- ASTM-E325 - Test Method for Silicon in Organic Compounds by Sodium Peroxide Bomb Ignition (Withdrawn 1996)
- ASTM-E326 - Test Method for Hydroxyl Groups by Phthalic Anhydride Esterification (Withdrawn 2001)
- ASTM-E335 - Standard Test Method for Hydroxyl Groups by Pyromellitic Dianhydride Esterification (Withdrawn 2003)
- ASTM-E38 - Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1989)
- ASTM-E394 - Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
- ASTM-E396 - Standard Test Methods for Chemical Analysis of Cadmium
- ASTM-E443 - Test Method for Sulphur in Organic Compounds by Oxygen Flask Combustion (Withdrawn 1997)
- ASTM-E461 - Recommended Practice for Sensory Evaluation of Industrial and Institutional Food Purchase (Withdrawn 1992)
- ASTM-E506 - Standard Test Method for Mercury in Liquid Chlorine
- ASTM-E533 - Standard Test Method for Trace Amounts of Arsenic in Inorganic Industrial Chemicals (Withdrawn 2003)
- ASTM-E534 - Standard Test Methods for Chemical Analysis of Sodium Chloride
- ASTM-E538 - Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
- ASTM-E687 - Practice for Sensory Evaluation Procedure to Establish Guidelines for Open Dating Food and Beverage Products (Withdrawn 1988)
- ASTM-E819 - Standard Test Method for Trace Amounts of Arsenic in Organic Industrial Chemicals (Withdrawn 2003)
- ASTM-E820 - Practice for Determining Absolute Absorbed Dose Rates for Electron Beams (Withdrawn 1987)
- ASTM-F2714 - Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
- ASTM-F307 - Standard Practice for Sampling Pressurized Gas for Gas Analysis
- ASTM-F327 - Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
- ASTM-F334 - Method for Measuring Lithium-Ion Drift Mobility in Germanium Single Crystals (Withdrawn 1989)
- ASTM-G106 - Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
- ASTM-G120 - Standard Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction
- ASTM-PS95 - Provisional Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings using Field-Portable X-Ray Fluorescence (XRF) Devices (Withdrawn 2001)
BSI:
- BS-1673-9 - Methods of test for raw rubber and unvulcanized compounded rubber. Chemical analysis of butadiene rubber
- BS-2511 - Methods for the determination of water (Karl Fischer method)
- BS-3282 - Glossary of terms relating to gas chromatography
- BS-4451 - Method for determination of carbon residue of petroleum products (Ramsbottom method)
- BS-4550-2 - Methods of testing cement. Chemical tests
- BS-4559-1.1 - Methods for preparation of calibration gas mixtures. Weighing methods. Mixtures containing components fully vaporizable under ambient conditions
- BS-4559-3 - Static Volumetric Methods, Methods for Preparation of Calibration Gas Mixtures
- BS-4559-4 - Methods for preparation of calibration gas mixtures. Certificate of mixture preparation
- BS-4559-5.1 - Review of Methods of Calibration
- BS-4559-5.4 - Methods for Preparation of Calibration Gas Mixtures, Dynamic Volumetric Methods, Conti
- BS-4559-9.2 - Methods for preparation of calibration gas mixtures. Comparison methods and methods for establishing traceability. Checking by a comparison method
- BS-4603 - Method for determination of residue on ignition or ash of chemical products
- BS-5309-1 - Methods for sampling chemical products
- BS-5309-2 - Methods for sampling chemical products
- BS-5309-3 - Methods for sampling chemical products
- BS-5309-4 - Methods for sampling chemical products
- BS-5379 - Determination of the sulphur content of petroleum products by the Wickbold combustion method
- BS-5443 - Recommendations for a standard layout for methods of chemical analysis by gas chromatography
- BS-5706 - Methods for the determination of thiosulphate and other residual chemicals in processed photographic films, plates and papers: methylene blue photometric method and silver sulphide densitometric method
- BS-6438-2 - Method for Specifying Performance of P
- BS-EN-12698-1 - Chemical analysis of nitride bonded silicon carbide refractories
- BS-EN-12698-2 - Chemical analysis of nitride bonded silicon carbide refractories
- BS-EN-16280 - Breath alcohol test devices for general public. Requirements and test methods
- BS-EN-16640 - Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method
- BS-EN-16785-1 - Bio-based products. Bio-based content
- BS-EN-16785-2 - Bio-based products. Bio-based content
- BS-EN-17256 - Animal feeding stuffs: Methods of sampling and analysis. Determination of ergot alkaloids and tropane alkaloids in feed materials and compound feeds by LC-MS/MS
- BS-EN-17294 - Animal feeding stuffs. Methods of sampling and analysis. Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
- BS-EN-17298 - Animal feeding stuffs. Methods of sampling and analysis. Determination of benzoic and sorbic acid by High Performance Liquid Chromatography (HPLC)
- BS-EN-17813 - Environmental solid matrices. Determination of halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography
- BS-EN-50104 - Electrical equipment for the detection and measurement of oxygen. Performance requirements and test methods
- BS-EN-50271-TC - Tracked Changes. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
- BS-EN-50436-1 - Alcohol interlocks. Test methods and performance requirements
- BS-EN-50436-2 - Alcohol interlocks. Test methods and performance requirements
- BS-EN-50436-3 - Alcohol interlocks. Test methods and performance requirements
- BS-EN-50436-4 - Alcohol interlocks. Test methods and performance requirements
- BS-EN-50436-4-TC - Tracked Changes. Alcohol interlocks. Test methods and performance requirements
- BS-EN-50436-6 - Alcohol interlocks. Test methods and performance requirements
- BS-EN-50436-7 - Alcohol interlocks. Test methods and performance requirements
- BS-EN-60746-3 - Expression of performance of electrochemical analyzers
- BS-EN-61207-6 - Expression of performance of gas analyzers
- BS-EN-61207-6-TC - Tracked Changes. Expression of performance of gas analyzers
- BS-EN-61207-7 - Expression of performance of gas analyzers
- BS-EN-IEC-60746-4 - Expression of performance of electrochemical analyzers
- BS-EN-IEC-61207-2 - Expression of performance of gas analyzers
- BS-EN-IEC-61207-3 - Gas Analyzers. Expression of performance
- BS-EN-ISO-10723 - Natural gas. Performance evaluation for analytical systems
- BS-EN-ISO-14912 - Gas analysis. Conversion of gas mixture composition data
- BS-EN-ISO-15796 - Gas analysis. Investigation and treatment of analytical bias
- BS-EN-ISO-16664 - Gas analysis. Handling of calibration gases and gas mixtures. Guidelines
- BS-EN-ISO-16664-TC - Tracked Changes. Gas analysis. Handling of calibration gases and gas mixtures. Guidelines
- BS-EN-ISO-6141 - Gas analysis. Contents of certificates for calibration gas mixtures
- BS-EN-ISO-6142 - Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
- BS-EN-ISO-6142-1 - Gas analysis. Preparation of calibration gas mixtures
- BS-EN-ISO-6142-1-TC - Tracked Changes. Gas analysis. Preparation of calibration gas mixtures
- BS-EN-ISO-6143 - Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
- BS-EN-ISO-6144 - Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
- BS-EN-ISO-6145-11 - Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods
- BS-EN-ISO-6145-4 - Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods
- BS-EN-ISO-6145-6 - Gas analysis. Preparation of calibration gas mixtures using dynamic methods
- BS-IEC-61831 - On-line analyser systems. Guide to design and installation
- BS-IEC-61832 - Analyser systems. Guide to technical enquiry and bid evaluation
- BS-ISO-11039 - Surface chemical analysis. Scanning-probe microscopy. Measurement of drift rate
- BS-ISO-11505 - Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
- BS-ISO-11775 - Surface chemical analysis. Scanning-probe microscopy. Determination of cantilever normal spring constants
- BS-ISO-11952 - Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
- BS-ISO-12963 - Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
- BS-ISO-13083 - Surface chemical analysis. Scanning probe microscopy. Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
- BS-ISO-13084-TC - Tracked Changes. Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
- BS-ISO-13095 - Surface Chemical Analysis. Atomic force microscopy. Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
- BS-ISO-13424 - Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of results of thin-film analysis
- BS-ISO-14167 - Gas analysis. General quality aspects and metrological traceability of calibration gas mixtures
- BS-ISO-14237 - Surface chemical analysis. Secondary-ion mass spectrometry. Determination of boron atomic concentration in silicon using uniformly doped materials
- BS-ISO-14606 - Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
- BS-ISO-14606-TC - Tracked Changes. Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
- BS-ISO-14701 - Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
- BS-ISO-14701-TC - Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
- BS-ISO-14706 - Surface chemical analysis. Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
- BS-ISO-14707 - Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
- BS-ISO-14707-TC - Tracked Changes. Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
- BS-ISO-14912 - Gas Analysis, Conversion of Gas Mixture Composition Data
- BS-ISO-14975 - Surface chemical analysis. Information formats
- BS-ISO-15470 - Surface chemical analysis. X-ray photoelectron spectroscopy. Description of selected instrumental performance parameters
- BS-ISO-15471 - Surface chemical analysis. Auger electron spectroscopy. Description of selected instrumental performance parameters
- BS-ISO-15471-TC - Tracked Changes. Surface chemical analysis. Auger electron spectroscopy. Description of selected instrumental performance parameters
- BS-ISO-15472 - Surface chemical analysis. X-ray photoelectron spectrometers. Calibration of energy scales
- BS-ISO-15796 - Gas Analysis - Investigation & Treatment of Analytical Bias
- BS-ISO-16129 - Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
- BS-ISO-16129-TC - Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
- BS-ISO-16242 - Surface chemical analysis. Recording and reporting data in Auger electron spectroscopy (AES)
- BS-ISO-16243 - Surface chemical analysis. Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
- BS-ISO-16413 - Evaluation of thickness, density and interface width of thin films by X-ray reflectometry. Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
- BS-ISO-16531 - Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
- BS-ISO-16962 - Surface chemical analysis. Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
- BS-ISO-17109 - Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter dept profiling using single and multi-layer thin films
- BS-ISO-17109-TC - Tracked Changes. Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter dept profiling using single and multi-layer thin films
- BS-ISO-17331 - Surface chemical analysis. Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
- BS-ISO-17560 - Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of boron in silicon
- BS-ISO-17862 - Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
- BS-ISO-17973 - Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis
- BS-ISO-17973-TC - Tracked Changes. Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis
- BS-ISO-17974 - Surface chemical analysis. High-resolution Auger electron spectrometers. Calibration of energy scales for elemental and chemical-state analysis
- BS-ISO-18114 - Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
- BS-ISO-18114-TC - Tracked Changes. Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials
- BS-ISO-18115 - Surface Chemical Analysis - Vocabulary
- BS-ISO-18115-1 - Surface chemical analysis. Vocabulary
- BS-ISO-18115-1-TC - Tracked Changes. Surface chemical analysis. Vocabulary
- BS-ISO-18115-2 - Surface chemical analysis. Vocabulary
- BS-ISO-18115-3 - Surface chemical analysis. Vocabulary
- BS-ISO-18116 - Surface chemical analysis. Guidelines for preparation and mounting of specimens for analysis
- BS-ISO-18117 - Surface chemical analysis. Handling of specimens prior to analysis
- BS-ISO-18118 - Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
- BS-ISO-18118-TC - Tracked Changes. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
- BS-ISO-18337 - Surface chemical analysis. Surface characterization. Measurement of the lateral resolution of a confocal fluorescence microscope
- BS-ISO-18516 - Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Determination of lateral resolution
- BS-ISO-18554 - Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
- BS-ISO-19229 - Gas analysis. Purity analysis and the treatment of purity data
- BS-ISO-19230 - Gas analysis. Sampling guidelines
- BS-ISO-19318-TC - Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of methods used for charge control and charge correction
- BS-ISO-19668 - Surface chemical analysis. X-ray photoelectron spectroscopy. Estimating and reporting detection limits for elements in homogeneous materials
- BS-ISO-20289 - Surface chemical analysis. Total reflection X-ray fluorescence analysis of water
- BS-ISO-20411 - Surface chemical analysis. Secondary ion mass spectrometry. Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
- BS-ISO-20579-4 - Surface chemical analysis. Guidelines to sample handling, preparation and mounting
- BS-ISO-20903 - Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
- BS-ISO-21222 - Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
- BS-ISO-21270 - Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
- BS-ISO-22415 - Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials
- BS-ISO-22581 - Surface chemical analysis. Near real-time information from the X-ray photoelectron spectroscopy survey scan. Rules for identification of, and correction for, surface contamination by carbon-containing compounds
- BS-ISO-23124 - Surface chemical analysis. Measurement of lateral and axial resolutions of a Raman microscope
- BS-ISO-23170 - Surface chemical analysis. Depth profiling. Non-destructive depth profiling of nanoscale heavy metal oxide thin films on Si substrates with medium energy ion scattering
- BS-ISO-23729 - Surface chemical analysis. Atomic force microscopy. Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
- BS-ISO-23812 - Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth calibration for silicon using multiple delta-layer reference materials
- BS-ISO-23830 - Surface chemical analysis. Secondary-ion mass spectrometry. Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- BS-ISO-24236 - Surface chemical analysis. Auger electron spectroscopy. Repeatability and constancy of intensity scale
- BS-ISO-24237 - Surface chemical analysis. X-ray photoelectron spectroscopy. Repeatability and constancy of intensity scale
- BS-ISO-24417 - Surface chemical analysis. Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
- BS-ISO-24465 - Surface chemical analysis. Determination of the minimum detectability of surface plasmon resonance device
- BS-ISO-27911 - Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
- BS-ISO-29081 - Surface chemical analysis. Auger electron spectroscopy. Reporting of methods used for charge control and charge correction
- BS-ISO-3793 - Essential oils. Estimation of primary and secondary free alcohols content by acetylation in pyridine
- BS-ISO-5861 - Surface chemical analysis. X-ray photoelectron spectroscopy. Method of intensity calibration for quartz-crystal monochromated Al K XPS instruments
- BS-ISO-5991 - Essential oils. Determination of residue content from distillation under reduced pressure
- BS-ISO-6142 - Gas Analysis - Preparation of Calibration Gas Mixtures - Gravimetric Method
- BS-ISO-6142-1 - Gas analysis. Preparation of calibration gas mixtures
- BS-ISO-6142-2 - Gas analysis. Preparation of calibration gas mixtures
- BS-ISO-6143 - Gas Analysis - Comparison Methods for Determining & Checkingthe Composition of Calibra
- BS-ISO-6145-10 - Gas Analysis, Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Method
- BS-ISO-6145-11 - Gas Analysis, Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Method
- BS-ISO-6145-2 - Gas analysis. Preparation of calibration gas mixtures using dynamic methods
- BS-ISO-6145-5 - Gas Analysis, Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Method
- BS-ISO-6145-7 - Gas Analysis, Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Method
- BS-ISO-6145-8 - Part 8: Diffusion Method, Gas Analysis - Preparation of Calibration Gas Mixtures Using
- BS-ISO-6145-9 - Gas Analysis, Preparation of Calibration Gax Mixtures Using Dynamic Volumetric Method
- BS-ISO-7431-1 - Thiourea for industrial use
- BS-ISO-7431-2 - Thiourea for industrial use
- BS-ISO-7504 - Gas analysis. Vocabulary
- BS-ISO-7504-TC - Tracked Changes. Gas analysis. Vocabulary
- DD-ISO-15338 - Surface chemical analysis. Glow discharge Mass spectrometry (GD-MS). Introduction to use
- DD-ISO-15969 - Surface Chemical Analysis, Depth Profiling, Measurement of Sputtered Depth
- DD-ISO-29041 - Gas mixtures. Gravimetric preparation. Mastering correlations in composition
- DD-ISO/TR-15969 - Surface chemical analysis. Depth profiling. Measurement of sputtered depth
- PD-CEN-16640 - Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method
- PD-CEN-17421 - Animal feeding stuffs: Methods of sampling and analysis. Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis
- PD-CEN-17674 - Bio-based products. Use of stable isotope ratios of Carbon, Hydrogen, Oxygen and Nitrogen as tools for verification of the origin of bio-based feedstock and characteristics of production processes. Overview of relevant existing applications
- PD-IEC-61832 - Design and installation of on-line analyser systems. Guide to technical enquiry and bid evaluation
- PD-ISO-14187 - Surface chemical analysis. Characterization of nanostructured materials
- PD-ISO-15338 - Surface chemical analysis. Glow discharge mass spectrometry. Operating procedures
- PD-ISO-15969 - Surface chemical analysis. Depth profiling. Measurement of sputtered depth
- PD-ISO-15969-TC - Tracked Changes. Surface chemical analysis. Depth profiling. Measurement of sputtered depth
- PD-ISO-16268 - Surface chemical analysis. Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
- PD-ISO-18394 - Surface chemical analysis. Auger electron spectroscopy. Derivation of chemical information
- PD-ISO-18507 - Surface chemical analysis. Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
- PD-ISO-19319 - Surface chemical analysis. Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods
- PD-ISO-19693 - Surface chemical analysis. Characterization of functional glass substrates for biosensing applications
- PD-ISO-22335 - Surface chemical analysis. Depth profiling. Measurement of sputtering rate. Mesh-replica method using a mechanical stylus profilometer
- PD-ISO-25138 - Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry
IEC:
- EN-IEC-60746-4 - Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane-covered amperometric sensors (IEC 60746-4:2018)
- IEC-60746-1 - Expression of performance of electrochemical analyzers - Part 1: General
- IEC-61207-1 - Part 1: General, Expression of Performance of Gas Analyzers
- IEC-61207-3 - Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
- IEC-61207-3-RL - Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
- IEC-61207-6 - Expression of performance of gas analyzers - Part 6: Photometric analyzers
- IEC-61207-7 - Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers
- IEC-61832 - Design and installation of on-line analyser systems - Guide to technical enquiry and bid evaluation
- IEC-62432 - The rH index in aqueous and aqueous-organic media
- IEC-62434 - pH measurements in difficult media - Definitions, standards and procedures
ISO:
- ISO-10810 - Surface chemical analysis - X-ray photoelectron spectroscopy - Guidelines for analysis
- ISO-11039 - Surface chemical analysis - Scanning-probe microscopy - Measurement of drift rate
- ISO-11505 - Surface chemical analysis - General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry
- ISO-11775 - Surface chemical analysis - Scanning-probe microscopy - Determination of cantilever normal spring constants
- ISO-11952 - Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems
- ISO-12406 - Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of arsenic in silicon
- ISO-12963 - Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
- ISO-12963-AM1 - - Amendment 1: Correction to Formula 5
- ISO-13083 - Surface chemical analysis - Scanning probe microscopy - Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
- ISO-13084 - Surface chemical analysis - Secondary ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
- ISO-13095 - Surface Chemical Analysis - Atomic force microscopy - Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
- ISO-13424 - Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of results of thin-film analysis
- ISO-14167 - Gas analysis - General quality aspects and metrological traceability of calibration gas mixtures
- ISO-14187 - Surface chemical analysis - Characterization of nanostructured materials
- ISO-14237 - Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
- ISO-14606 - Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
- ISO-14701 - Surface chemical analysis - X-ray photoelectron spectroscopy - Measurement of silicon oxide thickness
- ISO-14706 - Surface chemical analysis - Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
- ISO-14707 - Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use
- ISO-14912 - Gas analysis - Conversion of gas mixture composition data
- ISO-14975 - Surface chemical analysis -- Information formats
- ISO-14976 - Surface chemical analysis -- Data transfer format
- ISO-15338 - Surface chemical analysis - Glow discharge mass spectrometry - Operating procedures
- ISO-15470 - Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
- ISO-15471 - Surface chemical analysis - Auger electron spectroscopy - Description of selected instrumental performance parameters
- ISO-15472 - Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
- ISO-15796 - Gas analysis - Investigation and treatment of analytical bias
- ISO-15969 - Surface chemical analysis - Depth profiling - Measurement of sputtered depth
- ISO-16129 - Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
- ISO-16242 - Surface chemical analysis - Recording and reporting data in Auger electron spectroscopy (AES)
- ISO-16243 - Surface chemical analysis - Recording and reporting data in X-ray photoelectron spectroscopy (XPS)
- ISO-16268 - Surface chemical analysis - Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
- ISO-16413 - Evaluation of thickness, density and interface width of thin films by X-ray reflectometry - Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
- ISO-16531 - Surface chemical analysis - Depth profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
- ISO-16664 - Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
- ISO-16962 - Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
- ISO-17109 - Surface chemical analysis - Depth profiling - Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
- ISO-17331 - Surface chemical analysis - Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
- ISO-17331-AM1 - Amendment 1 to ISO 17331
- ISO-17560 - Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon
- ISO-17862 - Surface chemical analysis - Secondary ion mass spectrometry - Linearity of intensity scale in single ion counting time-of-flight mass analysers
- ISO-17973 - Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
- ISO-17974 - Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis
- ISO-18114 - Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
- ISO-18115 - Surface Chemical Analysis - Vocabulary
- ISO-18115-1 - Surface chemical analysis - Vocabulary - Part 1: General terms and terms used in spectroscopy
- ISO-18115-2 - Surface chemical analysis - Vocabulary - Part 2: Terms used in scanning-probe microscopy
- ISO-18115-3 - Surface chemical analysis - Vocabulary - Part 3: Terms used in optical interface analysis
- ISO-18115-AM1 - Amendment 1, Surface Chemical Analysis - Vocabulary
- ISO-18115-AM2 - Amendment 2, Surface Chemical Analysis - Vocabulary
- ISO-18116 - Surface chemical analysis - Guidelines for preparation and mounting of specimens for analysis
- ISO-18117 - Surface chemical analysis - Handling of specimens prior to analysis
- ISO-18118 - Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
- ISO-18337 - Surface chemical analysis - Surface characterization - Measurement of the lateral resolution of a confocal fluorescence microscope
- ISO-18392 - Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for determining backgrounds
- ISO-18394 - Surface chemical analysis - Auger electron spectroscopy - Derivation of chemical information
- ISO-18507 - Surface chemical analysis - Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis
- ISO-18516 - Surface chemical analysis - Determination of lateral resolution and sharpness in beam based methods with a range from nanometres to micrometres
- ISO-18554 - Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
- ISO-19229 - Gas analysis - Purity analysis and the treatment of purity data
- ISO-19230 - Gas analysis - Sampling guidelines
- ISO-19318 - Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
- ISO-19319 - Surface chemical analysis - Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods
- ISO-19668 - Surface chemical analysis - X-ray photoelectron spectroscopy - Estimating and reporting detection limits for elements in homogeneous materials
- ISO-19693 - Surface chemical analysis - Characterization of functional glass substrates for biosensing applications
- ISO-19830 - Surface chemical analysis - Electron spectroscopies - Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
- ISO-20289 - Surface chemical analysis - Total reflection X-ray fluorescence analysis of water
- ISO-20341 - Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials
- ISO-20411 - Surface chemical analysis - Secondary ion mass spectrometry - Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
- ISO-20579-1 - Surface chemical analysis - Sample handling, preparation and mounting - Part 1: Documenting and reporting the handling of specimens prior to analysis
- ISO-20579-3 - Surface chemical analysis - Sample handling, preparation and mounting - Part 3: Biomaterials
- ISO-20579-4 - Surface chemical analysis - Guidelines to sample handling, preparation and mounting - Part 4: Reporting information related to the history, preparation, handling and mounting of nano-objects prior to surface analysis
- ISO-20903 - Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
- ISO-21079-1 - Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents and dissolution
- ISO-21079-2 - Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis
- ISO-21079-3 - Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP -AES)
- ISO-21222 - Surface chemical analysis - Scanning probe microscopy - Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
- ISO-21270 - Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
- ISO-22048 - Surface chemical analysis - Information format for static secondary-ion mass spectrometry
- ISO-22335 - Surface chemical analysis - Depth profiling - Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer
- ISO-22415 - Surface chemical analysis - Secondary ion mass spectrometry - Method for determining yield volume in argon cluster sputter depth profiling of organic materials
- ISO-22581 - Surface chemical analysis - Near real-time information from the X-ray photoelectron spectroscopy survey scan - Rules for identification of, and correction for, surface contamination by carbon-containing compounds
- ISO-22933 - Surface chemical analysis - Secondary ion mass spectrometry - Method for the measurement of mass resolution in SIMS
- ISO-23124 - Surface chemical analysis - Measurement of lateral and axial resolutions of a Raman microscope
- ISO-23170 - Surface chemical analysis - Depth profiling - Non-destructive depth profiling of nanoscale heavy metal oxide thin films on Si substrates with medium energy ion scattering
- ISO-23729 - Surface chemical analysis - Atomic force microscopy - Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
- ISO-23812 - Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
- ISO-23830 - Surface chemical analysis - Secondary-ion mass spectrometry - Repeatability and constancy of the relative-intensity scale in static secondary-ion mass spectrometry
- ISO-24236 - Surface chemical analysis - Auger electron spectroscopy - Repeatability and constancy of intensity scale
- ISO-24237 - Surface chemical analysis - X-ray photoelectron spectroscopy - Repeatability and constancy of intensity scale
- ISO-24417 - Surface chemical analysis - Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
- ISO-24465 - Surface chemical analysis - Determination of the minimum detectability of surface plasmon resonance device
- ISO-25138 - Surface chemical analysis - Analysis of metal oxide films by glow-discharge optical-emission spectrometry
- ISO-2590 - General method for the determination of arsenic -- Silver diethyldithiocarbamate photometric method
- ISO-2718 - Standard layout for a method of chemical analysis by gas chromatography
- ISO-27911 - Surface chemical analysis - Scanning-probe microscopy - Definition and calibration of the lateral resolution of a near-field optical microscope
- ISO-28600 - Surface chemical analysis - Data transfer format for scanning-probe microscopy
- ISO-29041 - Gas mixtures - Gravimetric preparation - Mastering correlations in composition
- ISO-29081 - Surface chemical analysis - Auger electron spectroscopy - Reporting of methods used for charge control and charge correction
- ISO-3165 - Sampling of chemical products for industrial use -- Safety in sampling
- ISO-5790 - Inorganic chemical products for industrial use -- General method for determination of chloride content -- Mercurimetric method
- ISO-5861 - Surface chemical analysis - X-ray photoelectron spectroscopy - Method of intensity calibration for quartz-crystal monochromated Al K XPS instruments
- ISO-6141 - Gas analysis - Contents of certificates for calibration gas mixtures
- ISO-6141-AM1 - - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017
- ISO-6142 - Gas analysis -- Preparation of calibration gas mixtures -- Gravimetric method
- ISO-6142-1 - Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures
- ISO-6142-1-AM1 - - Amendment 1: Corrections to formulae in Annex E and Annex G
- ISO-6142/A1 - Gas analysis - Preparation of calibration gas mixtures - Weighing methods - Amendment 1: Liquid introduction
- ISO-6143 - Gas analysis -- Comparison methods for determining and checking the composition of calibration gas mixtures
- ISO-6144 - Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
- ISO-6145-1 - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects
- ISO-6145-10 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
- ISO-6145-11 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
- ISO-6145-2 - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 2: Piston pumps
- ISO-6145-4 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method
- ISO-6145-5 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
- ISO-6145-6 - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
- ISO-6145-7 - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers
- ISO-6145-8 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method
- ISO-6145-9 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
- ISO-6147 - Gas analysis -- Preparation of calibration gas mixtures -- Saturation method
- ISO-6206 - Chemical products for industrial use -- Sampling -- Vocabulary
- ISO-6227 - Chemical products for industrial use -- General method for determination of chloride ions -- Potentiometric method
- ISO-6228 - Chemical products for industrial use -- General method for determination of traces of sulphur compounds, as sulphate, by reduction and titrimetry
- ISO-6382 - General method for determination of silicon content -- Reduced molybdosilicate spectrophotometric method
- ISO-6685 - Chemical products for industrial use -- General method for determination of iron content -- 1,10-Phenanthroline spectrophotometric method
- ISO-7431-1 - Thiourea for industrial use - Part 1: Test methods
- ISO-7431-2 - Thiourea for industrial use - Part 2: Specifications
- ISO-7504 - Gas analysis - Vocabulary
- ISO-758 - Liquid chemical products for industrial use -- Determination of density at 20 degrees C
- ISO-759 - Volatile organic liquids for industrial use -- Determination of dry residue after evaporation on water bath -- General method
- ISO-760 - Determination of water -- Karl Fischer method (General method)
- ISO-78-2 - Chemistry -- Layouts for standards -- Part 2: Methods of chemical analysis
- ISO-8213 - Chemical products for industrial use -- Sampling techniques -- Solid chemical products in the form of particles varying from powders to coarse lumps
- ISO-918 - Volatile organic liquids for industrial use -- Determination of distillation characteristics
Other SDOs:
- DIN-EN-12698-1 - Part 1: Chemical Methods, Chemical Analysis of Nitride Bonded Silicon Carbide Refracto
- DIN-EN-12698-2 - Part 2: Xrd Methods, Chemical Analysis of Nitride Bonded Silicon Carbide Refractories
- DIN-EN-15136 - Materials & Articles in Contact With Foodstuffs - Certain Epoxy Derivatives Subject To
- DIN-EN-15137 - Materials & Articles in Contact With Foodstuffs - Certain Epoxy Derivates Subject To L
- DIN-EN-15205 - Determination of Hexavalent Chromium in Corrosion Protection Layers - Qualitative Anal
- DIN-EN-ISO-14912 - Gas Analysis - Conversion of Gas Mixture Composition Data
- DIN-EN-ISO-6141 - Gas analysis - Contents of certificates for calibration gas mixtures
- DIN-EN-ISO-6142 - Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
- DIN-EN-ISO-6143 - Gas Analysis - Comparison Methods for Determining & Checking the Composition of Calibr
- DIN-EN-ISO-6144 - Gas Analysis - Preparation of Calibration Gas Mixtures - Static Volumetric Method
- DIN-ISO-6143 - Gas Analysis, Comparison Methods for Determining & Checking the Composition of Calibr
- EN-12698-1 - Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods
- EN-12698-2 - Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods
- EN-15137 - Materials & Articles in Contact With Foodstuffs - Certain Epoxy Derivatives Subject To
- EN-15964 - Breath alcohol test devices other than single use devices - Requirements and test methods
- EN-16280 - Breath alcohol test devices for general public - Requirements and test methods
- EN-16640 - Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method
- EN-16785-1 - Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis
- EN-16785-2 - Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method
- EN-17294 - Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
- EN-17298 - Animal feeding stuffs - Methods of sampling and analysis - Determination of benzoic and sorbic acid by High Performance Liquid Chromatography (HPLC)
- EN-50436-1 - Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments for drink-driving-offender programs
- EN-50436-2 - Alcohol interlocks - Test methods and performance requirements - Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use
- EN-50436-3 - Alcohol interlocks - Test methods and performance requirements - Part 3: Guidance for authorities, decision makers, purchasers and users
- EN-50436-6 - Alcohol interlocks - Test methods and performance requirements - Part 6: Data security
- EN-50436-7 - Alcohol interlocks - Test methods and performance requirements - Part 7: Installation document
- EN-61207-6 - Expression of performance of gas analyzers. Photometric analyzers
- EN-61207-7 - Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers
- EN-ISO-14912 - Gas Analysis, Conversion of Gas Mixture Composition Data
- EN-ISO-15796 - Gas Analysis - Investigation & Treatment of Analytical Bias
- EN-ISO-16664 - Gas analysis - Handling of calibration gases and gas mixtures - Guidelines
- EN-ISO-6141 - Gas analysis - Contents of certificates for calibration gas mixtures
- EN-ISO-6142 - Gas Analysis - Preparation of Calibration Gas Mixtures - Gravimetric Method
- EN-ISO-6142-1 - Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures
- EN-ISO-6143 - Gas Analysis - Comparison Methods for Determining & Checking the Composition of Calibr
- EN-ISO-6144 - Gas Analysis - Preparation of Calibration Gas Mixtures -Static Volumetric Method
- EN-ISO-6145-11 - Part 11: Electrochemical Generation, Gas Analysis - Preparation of Calibration Gas Mix
- EN-ISO-6145-6 - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
- JIS-A-1901 - Determination of the emission of volatile organic compounds and aldehydes by building products -- Small chamber method
- JIS-B-7951 - Continuous analyzer for carbon monoxide in ambient air
- JIS-B-7982 - Automated measuring systems and analyzers for nitrogen oxides in flue gas
- JIS-B-7992 - Automated Measuring Systems for Oxides of Nitrogen in Flue Gas Using Non-Extractive Me
- JIS-K-0068 - Test methods for water content of chemical products
- JIS-K-0081 - Method for determination of boron in flue gas
- JIS-K-0085 - Methods for Determination of Bromine in Flue Gas
- JIS-K-0086 - Methods for determination of phenols in flue gas
- JIS-K-0088 - Methods for determination of benzene in flue gas
- JIS-K-0089 - Methods for determination of acrolein in flue gas
- JIS-K-0090 - Method for determination of phosgene in flue gas
- JIS-K-0091 - Methods for determination of carbon disulfide in flue gas
- JIS-K-0092 - Methods for determination of mercaptan in flue gas
- JIS-K-0093 - Testing methods for polychlorobiphenyl in industrial water and wastewater
- JIS-K-0095 - Methods for sampling of flue gas
- JIS-K-0098 - Methods for determination of carbon monoxide in flue gas
- JIS-K-0099 - Methods for determination of ammonia in flue gas
- JIS-K-0103 - Methods for determination of sulfur oxides in flue gas
- JIS-K-0104 - Methods for determination of nitrogen oxides in flue gas
- JIS-K-0105 - Methods for determination of fluorine compounds in flue gas
- JIS-K-0109 - Methods for Determination of Hydrogen Cyanide in Flue Gas
- JIS-K-0113 - General Rules for Methods of Potentiometric, Amperometric, Coulometric, & KARL-Fischer
- JIS-K-0122 - General rules for ion selective electrode method
- JIS-K-0133 - General rules for high frequency plasma mass spectrometry
- JIS-K-0150 - Surface chemical analysis -- Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
- JIS-K-0222 - Methods for determination of mercury in stack gas
- JIS-K-0225 - Testing methods for determination of trace components in diluent gas and zero gas
- JIS-K-0301 - Methods for determination of oxygen in flue gas
- JIS-K-0305 - Methods for determination of trichloroethylene and tetrachloroethylene in flue gas
- JIS-K-0311 - Method for determination of tetra-through octachlorodibenzo-p-dioxins, tetra-through octachlorodibenzofurans and dioxin-like polychlorinatedbiphenyls in stationary source emissions
- JIS-K-0557 - Water used for industrial water and wastewater analysis
- JIS-K-0804 - Gas detector tube measurement system (Length-of-stain type)
- JIS-K-0806 - Automatic chemical oxygen demand meter
- JIS-Z-8802 - Methods for determination of pH of aqueous solutions
- SIS-CEN/TS-16640 - Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method
- SIS-ISO/TS-25138 - Surface chemical analysis - Analysis of metal oxide films by glow discharge optical emission spectrometry (ISO/TS 25138:2010, IDT)
- SS-187154 - Solid mineral fuels - Determination of chlorine using Eschka mixture
- SS-187155 - Hard coal - Determination of total moisture
- SS-187160 - General method for the determination of arsenic -Silver diethyldithiocarbamate photometric method
- SS-187162 - Solid mineral fuels - Determination of phosphorous content - Reduced molybdophosphate photometric method
- SS-187167 - Solid mineral fuels - Determination of carbon dioxide content - Gravimetric method
- SS-EN-10212 - Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method
- SS-EN-12402 - Lead and lead alloys - Methods of sampling for analysis
- SS-EN-12698-1 - Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods
- SS-EN-12698-2 - Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods
- SS-EN-15137 - Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of NOGE and its hydroxy and chlorinated derivatives
- SS-EN-15964 - Breath alcohol test devices other than single use devices - Requirements and test methods
- SS-EN-16280 - Breath alcohol test devices for general public - Requirements and test methods
- SS-EN-16344 - Cosmetics - Analysis of cosmetic products - Screening for UV-filters in cosmetic products and quantitative determination of 10 UV-filters by HPLC.
- SS-EN-16640 - Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method
- SS-EN-16785-1 - Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis
- SS-EN-16785-2 - Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method
- SS-EN-17256 - Animal feeding stuffs: Methods of sampling and analysis - Determination of ergot alkaloids and tropane alkaloids in feed materials and compound feeds by LC-MS/MS
- SS-EN-17294 - Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
- SS-EN-17298 - Animal feeding stuffs - Methods of sampling and analysis - Determination of benzoic and sorbic acid by High Performance Liquid Chromatography (HPLC)
- SS-EN-17299 - Animal feeding stuffs: Methods of sampling and analysis - Screening and determination of authorized coccidiostats at additive and 1 % and 3 % cross-contamination levels, and of non-registered coccidiostats and of one antibiotic at sub-additive levels, in compound feed with High Performance Liquid Chromatography - Tandem Mass Spectrometry detection (LC-MS/MS)
- SS-EN-1744-1 - Tests for chemical properties of aggregates - Part 1: Chemical analysis
- SS-EN-17813 - Environmental solid matrices - Determination of halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography
- SS-EN-ISO-14912 - Gas analysis - Conversion of gas mixture composition data (ISO 14912:2003)
- SS-EN-ISO-15796 - Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005)
- SS-EN-ISO-16664 - Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017)
- SS-EN-ISO-21079-1 - Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents and dissolution (ISO 21079-1:2008)
- SS-EN-ISO-21079-2 - Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 21079-2:2008)
- SS-EN-ISO-21079-3 - Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorenscence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP-AES) (ISO 21079-3:2008)
- SS-EN-ISO-6141 - Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015)
- SS-EN-ISO-6141-AM1 - Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020)
- SS-EN-ISO-6142 - Gas analysis - Preparation of calibration gas mixtures - Gravimetric method (ISO 6142:2001)
- SS-EN-ISO-6142-1 - Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015)
- SS-EN-ISO-6143 - Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
- SS-EN-ISO-6144 - Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003)
- SS-EN-ISO-6145-1 - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
- SS-EN-ISO-6145-10 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
- SS-EN-ISO-6145-11 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005)
- SS-EN-ISO-6145-4 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumentric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
- SS-EN-ISO-6145-5 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
- SS-EN-ISO-6145-6 - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
- SS-EN-ISO-6145-7 - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
- SS-EN-ISO-6145-8 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
- SS-EN-ISO-6145-9 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
- SS-ISO-11505 - Surface chemical analysis - General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry (ISO 11505:2012, IDT)
- SS-ISO-12963 - Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration (ISO 12963:2017, IDT)
- SS-ISO-13933 - Steel and iron - Determination of calcium and magnesium - Inductively coupled plasma atomic emission spectrometric method (ISO 13933:2014, IDT)
- SS-ISO-14167 - Gas analysis - General quality aspects and metrological traceability of calibration gas mixtures (ISO 14167:2018, IDT)
- SS-ISO-19229 - Gas analysis - Purity analysis and the treatment of purity data (ISO 19229:2015, IDT)
- SS-ISO-19230 - Gas analysis Sampling guidelines (ISO 19230:2020, IDT)
- SS-ISO-589 - Hard coal -Determination of total moisture (ISO 589:2008, IDT)
- SS-ISO-6145-2 - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 2: Piston pumps (ISO 6145-2:2014, IDT)
- SS-ISO-6227 - Chemical products for industrial use - General method for determination of chloride ions - Potentiometric method
- SS-ISO-6685 - Chemical products for industrial use - General method for determination of chloride ions - 1,10-Phenanthroline spectrophotometric method
- SS-ISO-758 - Liquid chemical products for industrial use - Determination of density at 20 degrees Celsius
- SS-ISO-759 - Volatile organic liquids for industrial use - Determination of dry residue after evaporation on a water bath - General method
- SS-ISO-760 - Determination of water - Karl Fischer method (General method)
- UNE-EN-ISO-6142-1 - Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures