Document Center List of Standards on Geotextiles Including Geosynthetics
ICS Code 59.080.70
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D1987 - Standard Test Method for Biological Clogging of Geotextile, Drainage Geocomposites, or Soil/Geotextile Filters
- ASTM-D4354 - Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing
- ASTM-D4355 - Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc-Type Apparatus
- ASTM-D4439 - Standard Terminology for Geosynthetics
- ASTM-D4491 - Standard Test Methods for Water Permeability of Geotextiles by Permittivity
- ASTM-D4533 - Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- ASTM-D4545 - Standard Practice for Determining the Integrity of Factory Seams Used in Joining Manufactured Flexible Sheet Geomembranes (Withdrawn 2008)
- ASTM-D4594 - Standard Test Method for Effects of Temperature on Stability of Geotextiles
- ASTM-D4595 - Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
- ASTM-D4632 - Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
- ASTM-D4716 - Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
- ASTM-D4751 - Standard Test Methods for Determining Apparent Opening Size of a Geotextile
- ASTM-D4759 - Standard Practice for Determining the Specification Conformance of Geosynthetics
- ASTM-D4833 - Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
- ASTM-D4873 - Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
- ASTM-D4884 - Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
- ASTM-D4885 - Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
- ASTM-D4886 - Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method)
- ASTM-D5101 - Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
- ASTM-D5141 - Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
- ASTM-D5199 - Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
- ASTM-D5261 - Standard Test Method for Measuring Mass per Unit Area of Geotextiles
- ASTM-D5262 - Standard Test Method for Determining the Unconfined Tension Creep and Creep Rupture Behavior of Planar Geosynthetics Used for Reinforcement Purposes
- ASTM-D5321 - Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
- ASTM-D5322 - Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
- ASTM-D5323 - Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes
- ASTM-D5397 - Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- ASTM-D5493 - Standard Test Method for Permittivity of Geotextiles Under Load
- ASTM-D5494 - Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
- ASTM-D5496 - Standard Practice for In Field Immersion Testing of Geosynthetics
- ASTM-D5514 - Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics
- ASTM-D5567 - Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
- ASTM-D5596 - Standard Test Method For Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
- ASTM-D5617 - Standard Test Method for Multi-Axial Elongation of Geomembranes
- ASTM-D5641 - Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber
- ASTM-D5747 - Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
- ASTM-D5818 - Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics
- ASTM-D5819 - Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
- ASTM-D5820 - Standard Practice for Pressurized Air Channel Evaluation of Dual-Seamed Geomembranes
- ASTM-D5884 - Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
- ASTM-D5885 - Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
- ASTM-D5887 - Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
- ASTM-D5890 - Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
- ASTM-D5891 - Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners
- ASTM-D5970 - Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure
- ASTM-D5994 - Standard Test Method for Measuring Core Thickness of Textured Geomembranes
- ASTM-D6213 - Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
- ASTM-D6241 - Standard Test Method for Static Puncture Index Strength of Geotextiles and Geotextile-Related Products Using a 50 mm Probe
- ASTM-D6389 - Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
- ASTM-D6461 - Standard Specifications for Silt Fence Materials
- ASTM-D6462 - Standard Practice for Silt Fence Installation (Withdrawn 2017)
- ASTM-D6497 - Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures
- ASTM-D6574 - Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
- ASTM-D6637 - Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
- ASTM-D6693 - Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
- ASTM-D6706 - Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
- ASTM-D6707 - Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
- ASTM-D6747 - Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes
- ASTM-D6766 - Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions
- ASTM-D6767 - Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
- ASTM-D6768 - Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
- ASTM-D6817 - Standard Specification for Rigid Cellular Polystyrene Geofoam
- ASTM-D6992 - Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
- ASTM-D7001 - Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
- ASTM-D7002 - Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method
- ASTM-D7003 - Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes
- ASTM-D7004 - Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
- ASTM-D7005 - Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
- ASTM-D7006 - Standard Practice for Ultrasonic Testing of Geomembranes
- ASTM-D7007 - Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials
- ASTM-D7008 - Standard Specification for Geosynthetic Alternate Daily Covers
- ASTM-D7056 - Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams
- ASTM-D7106 - Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
- ASTM-D7176 - Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
- ASTM-D7177 - Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes
- ASTM-D7178 - Standard Practice for Determining the Number of Constrictions “
m ” of Non-Woven Geotextiles - ASTM-D7179 - Standard Test Method for Determining Geonet Breaking Force
- ASTM-D7180 - Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
- ASTM-D7238 - Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
- ASTM-D7239 - Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
- ASTM-D7240 - Standard Practice for Electrical Leak Location Using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive-Backed Geomembrane Spark Test)
- ASTM-D7272 - Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods
- ASTM-D7273 - Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
- ASTM-D7274 - Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs)
- ASTM-D7275 - Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGMs)
- ASTM-D7361 - Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
- ASTM-D7406 - Standard Test Method for Time-Dependent Compressive Deformation Under Constant Pressure for Geosynthetic Drainage Products
- ASTM-D7407 - Standard Guide for Determining The Transmission of Gases Through Geomembranes
- ASTM-D7408 - Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
- ASTM-D7465 - Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications
- ASTM-D7466 - Standard Test Method for Measuring Asperity Height of Textured Geomembranes
- ASTM-D7499 - Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
- ASTM-D7613 - Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
- ASTM-D7700 - Standard Guide for Selecting Test Methods for Geomembrane Seams
- ASTM-D7701 - Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag (Withdrawn 2020)
- ASTM-D7702 - Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics
- ASTM-D7737 - Standard Test Method for Individual Geogrid Junction Strength
- ASTM-D7747 - Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method
- ASTM-D7748 - Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products
- ASTM-D7749 - Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method
- ASTM-D7852 - Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys
- ASTM-D7853 - Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
- ASTM-D7864 - Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
- ASTM-D7865 - Standard Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels
- ASTM-D7880 - Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag (Withdrawn 2022)
- ASTM-D7909 - Standard Guide for Placement of Blind Actual Leaks during Electrical Leak Location Surveys of Geomembranes
- ASTM-D7931 - Standard Guide for Specifying Drainage Geocomposites
- ASTM-D7953 - Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method
- ASTM-D7982 - Standard Practice for Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels
- ASTM-D8030 - Standard Practice for Sample Preparation for GCCM
- ASTM-D8057 - Standard Specification for Inlet Filters with a Rigid Frame
- ASTM-D8058 - Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- ASTM-D8102 - Standard Practice for Manufacturing Quality Control of Geotextiles
- ASTM-D8105 - Standard Guide for Use and Application of Geosynthetic Reinforcement Reduction Factor Test Results
- ASTM-D8117 - Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry
- ASTM-D8198 - Standard Specification for Hydraulically Applied 100 % Wood Fiber Mulches
- ASTM-D8204 - Standard Practice for Burial and Retrieval of Samples in a Test Pad to Evaluate Installation Effects on Geosynthetic Clay Liners
- ASTM-F316 - Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
- ASTM-F3181 - Standard Test Method for The Un-notched, Constant Ligament Stress Crack Test (UCLS) for HDPE Materials Containing Post- Consumer Recycled HDPE
BSI:
- BS-6906-1 - Methods of test for geotextiles. Determination of the tensile properties using a wide width strip
- BS-6906-8 - Methods of test for geotextiles
- BS-8661 - Geotextiles. Guidance for specification for basic separation and filtration functions
- BS-EN-12224 - Geotextiles and geotextile-related products. Determination of the resistance to weathering
- BS-EN-12225 - Geosynthetics. Method for determining the microbiological resistance by a soil burial test
- BS-EN-12226 - Geosynthetics. General tests for evaluation following durability testing
- BS-EN-12447 - Geotextiles and geotextile-related products. Screening test method for determining the resistance to hydrolysis in water
- BS-EN-12447-TC - Tracked Changes. Geotextiles and geotextile-related products. Screening test method for determining the resistance to hydrolysis in water
- BS-EN-13249 - Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
- BS-EN-13249-TC - Tracked Changes. Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
- BS-EN-13250 - Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways
- BS-EN-13250-TC - Tracked Changes. Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways
- BS-EN-13251 - Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures
- BS-EN-13251-TC - Tracked Changes. Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures
- BS-EN-13252 - Geotextiles and geotextile-related products. Characteristics required for use in drainage systems
- BS-EN-13252-TC - Tracked Changes. Geotextiles and geotextile-related products. Characteristics required for use in drainage systems
- BS-EN-13253 - Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments)
- BS-EN-13253-TC - Tracked Changes. Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments)
- BS-EN-13254 - Geotextiles and geotextile-related products. Characteristics required for the use in the construction of reservoirs and dams
- BS-EN-13254-TC - Tracked Changes. Geotextiles and geotextile-related products. Characteristics required for the use in the construction of reservoirs and dams
- BS-EN-13255 - Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals
- BS-EN-13255-TC - Tracked Changes. Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals
- BS-EN-13256 - Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures
- BS-EN-13256-TC - Tracked Changes. Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures
- BS-EN-13257 - Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals
- BS-EN-13257-TC - Tracked Changes. Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals
- BS-EN-13265 - Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects
- BS-EN-13265-TC - Tracked Changes. Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects
- BS-EN-13361 - Geosynthetic barriers. Characteristics required for use in the construction of reservoirs and dams
- BS-EN-13362 - Geosynthetic Barriers. Characteristics required for use in the construction of canals
- BS-EN-13362-TC - Tracked Changes. Geosynthetic Barriers. Characteristics required for use in the construction of canals
- BS-EN-13491 - Geosynthetic barriers. Characteristics required for use in the construction of tunnels and associated underground structures
- BS-EN-13492 - Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- BS-EN-13492-TC - Tracked Changes. Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- BS-EN-13493 - Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites
- BS-EN-13493-TC - Tracked Changes. Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites
- BS-EN-13562 - Geotextiles and geotextile-related products. Determination of resistance to penetration by water (hydrostatic pressure test)
- BS-EN-13719 - Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
- BS-EN-13719-TC - Tracked Changes. Geosynthetics. Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
- BS-EN-13738 - Geotextiles and geotextile-related products. Determination of pullout resistance in soil
- BS-EN-14030 - Geotextiles and geotextile-related products. Screening test method for determining the resistance to acid and alkaline liquids
- BS-EN-14150 - Geosynthetic barriers. Determination of permeability to liquids
- BS-EN-14151 - Geosynthetics. Determination of burst strength
- BS-EN-14196 - Geosynthetics. Test methods for measuring mass per unit area of clay geosynthetic barriers
- BS-EN-14196-TC - Tracked Changes. Geosynthetics. Test methods for measuring mass per unit area of clay geosynthetic barriers
- BS-EN-14415 - Geosynthetic barriers. Test method for determining the resistance to leaching
- BS-EN-14574 - Geosynthetics. Determination of the pyramid puncture resistance of supported geosynthetics
- BS-EN-14574-TC - Tracked Changes. Geosynthetics. Determination of the pyramid puncture resistance of supported geosynthetics
- BS-EN-14575 - Geosynthetic barriers. Screening test method for determining the resistance to oxidation
- BS-EN-14576 - Geosynthetics. Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking
- BS-EN-15381 - Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays
- BS-EN-15382 - Geosynthetic barriers. Characteristics required for use in transportation infrastructure
- BS-EN-15382-TC - Tracked Changes. Geosynthetic barriers. Characteristics required for use in transportation infrastructure
- BS-EN-16416 - Geosynthetic clay barriers. Determination of water flux index. Flexible wall permeameter method at constant head
- BS-EN-16993 - Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
- BS-EN-16994 - Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
- BS-EN-17096 - Geosynthetics. Test method for the determination of the strain hardening modulus of PE-HD geosynthetic barriers
- BS-EN-17323 - Geosynthetics. Determination of tensile properties of Polymeric Geosynthetic Barriers
- BS-EN-17738 - Geotextiles and geotextile-related products. Damage during installation procedure. Full scale test
- BS-EN-1897 - Geotextiles and geotextile-related products. Determination of the compressive creep properties
- BS-EN-963 - Geotextiles & GEOTEXTILE-Related Products, Sampling & Preparation of Test Specimens
- BS-EN-964-1 - Geotextiles and geotextile-related products. Determination of thickness at specified pressures
- BS-EN-ISO-10318 - Geosynthetics. Terms and definitions
- BS-EN-ISO-10318-1 - Geosynthetics
- BS-EN-ISO-10318-2 - Geosynthetics
- BS-EN-ISO-10319 - Geosynthetics. Wide-width tensile test
- BS-EN-ISO-10321 - Geosynthetics. Tensile test for joints/seams by wide-width strip method
- BS-EN-ISO-10722 - Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused by granular material (laboratory test method)
- BS-EN-ISO-10769 - Clay geosynthetic barriers. Determination of water absorption of bentonite
- BS-EN-ISO-10772 - Geotextiles. Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions
- BS-EN-ISO-10776 - Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, under load
- BS-EN-ISO-11058 - Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load
- BS-EN-ISO-12236 - Geosynthetics. Static puncture test (CBR test)
- BS-EN-ISO-12956 - Geotextiles and geotextile-related products. Determination of the characteristic opening size
- BS-EN-ISO-12956-TC - Tracked Changes. Geotextiles and geotextile-related products. Determination of the characteristic opening size
- BS-EN-ISO-12957-1 - Geosynthetics. Determination of friction characteristics
- BS-EN-ISO-12957-2 - Geotextiles. Determination of friction characteristics
- BS-EN-ISO-12958 - Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
- BS-EN-ISO-12958-1 - Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
- BS-EN-ISO-12958-2 - Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
- BS-EN-ISO-12960 - Geotextiles and geotextile-related products. Screening test methods for determining the resistance to acid and alkaline liquids
- BS-EN-ISO-13426-1 - Geotextiles and geotextile-related products. Strength of internal structural junctions
- BS-EN-ISO-13426-2 - Geotextiles and geotextile-related products. Strength of internal structural junctions
- BS-EN-ISO-13426-2-TC - Tracked Changes. Geotextiles and geotextile-related products. Strength of internal structural junctions
- BS-EN-ISO-13427 - Geosynthetics. Abrasion damage simulation (sliding block test)
- BS-EN-ISO-13427-TC - Tracked Changes. Geosynthetics. Abrasion damage simulation (sliding block test)
- BS-EN-ISO-13431 - Geotextiles and geotextile-related products. Determination of tensile creep and creep rupture behaviour
- BS-EN-ISO-13433 - Geosynthetics. Dynamic perforation test (cone drop test)
- BS-EN-ISO-13438 - Geosynthetics. Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation
- BS-EN-ISO-25619-1 - Geosynthetics. Determination of compression behaviour
- BS-EN-ISO-25619-1-TC - Tracked Changes. Geosynthetics. Determination of compression behaviour
- BS-EN-ISO-25619-2 - Geosynthetics. Determination of compression behaviour
- BS-EN-ISO-25619-2-TC - Tracked Changes. Geosynthetics. Determination of compression behaviour
- BS-EN-ISO-9862 - Geosynthetics. Sampling and preparation of test specimens
- BS-EN-ISO-9862-TC - Tracked Changes. Geosynthetics. Sampling and preparation of test specimens
- BS-EN-ISO-9863-1 - Geosynthetics. Determination of thickness at specified pressures
- BS-ISO-18325 - Geosynthetics. Test method for the determination of water discharge capacity for prefabricated vertical drains
- BS-ISO-22182 - Geotextiles and geotextile-related products. Determination of index abrasion resistance characteristics under wet conditions for hydraulic applications
- DD-CEN-14416 - Geosynthetic barriers. Test method for determining the resistance to roots
- DD-CEN-14417 - Geosynthetic barriers. Test method for the determination of the influence of wetting/drying cycles on the permeability of clay geosynthetic barriers
- DD-CEN-14418 - Geosynthetic barriers. Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
- DD-ENV-ISO-10722-1 - Geotextiles & GEOTEXTILES-Related Products, Procedure for Simulating Damage During Ins
- DD-ENV-ISO-13438 - Geotextiles and geotextile-related products. Screening test method for determining the resistance to oxidation
- DD-ISO-13434 - Geosynthetics. Guidelines for the assessment of durability
- DD-ISO-19708 - Geosynthetics. Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method
- PD-6533 - Guide to methods for assessing the durability of geotextiles. An interim document
- PD-CEN-14416 - Geosynthetic barriers. Test method for determining the resistance to roots
- PD-CEN-14417 - Geosynthetic barriers. Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers
- PD-CEN-14418 - Geosynthetic Barriers. Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
- PD-CEN-15019 - Geotextiles and geotextile-related products. On-site quality control
- PD-CEN-17445 - Geosynthetics. Standard test for the simulation of rainfall-induced erosion on the surface of a slope protected by geosynthetic erosion control products
- PD-CR-ISO-13434 - Guidelines on Durability of Geotextiles & GEOTEXTILE-Related Products
- PD-ISO-13434 - Geosynthetics. Guidelines for the assessment of durability
- PD-ISO-18228-1 - Design using geosynthetics
- PD-ISO-18228-10 - Design using geosynthetics
- PD-ISO-18228-2 - Design using geosynthetics
- PD-ISO-18228-3 - Design using geosynthetics
- PD-ISO-18228-6 - Design using geosynthetics
- PD-ISO-18228-7 - Design using geosynthetics
- PD-ISO-18228-9 - Design using geosynthetics
- PD-ISO-20432 - Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
- PD-ISO-20432-TC - Tracked Changes. Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
ISO:
- ISO-10318 - Geosynthetics - Terms and definitions
- ISO-10318-1 - Geosynthetics - Part 1: Terms and definitions
- ISO-10318-1-AM1 - - Amendment 1
- ISO-10318-2 - Geosynthetics - Part 2: Symbols and pictograms
- ISO-10318-2-AM1 - - Amendment 1
- ISO-10319 - Geosynthetics - Wide-width tensile test
- ISO-10320 - Geosynthetics - Identification on site
- ISO-10321 - Geosynthetics - Tensile test for joints/seams by wide-width strip method
- ISO-10722 - Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method)
- ISO-10769 - Clay geosynthetic barriers - Determination of water absorption of bentonite
- ISO-10772 - Geotextiles - Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions
- ISO-10773 - Clay geosynthetic barriers - Determination of permeability to gases
- ISO-10776 - Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load
- ISO-11058 - Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load
- ISO-12236 - Geosynthetics - Static puncture test (CBR test)
- ISO-12956 - Geotextiles and geotextile-related products - Determination of the characteristic opening size
- ISO-12957-1 - Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test
- ISO-12957-2 - Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test
- ISO-12958 - Geotextiles and geotextile-related products - Determination of water flow capacity in their plane
- ISO-12958-1 - Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 1: Index test
- ISO-12958-2 - Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 2: Performance test
- ISO-12960 - Geotextiles and geotextile-related products - Screening test methods for determining the resistance to acid and alkaline liquids
- ISO-13426-1 - Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells
- ISO-13426-2 - Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites
- ISO-13427 - Geosynthetics - Abrasion damage simulation (sliding block test)
- ISO-13428 - Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage
- ISO-13431 - Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour
- ISO-13433 - Geosynthetics - Dynamic perforation test (cone drop test)
- ISO-13434 - Geosynthetics - Guidelines for the assessment of durability
- ISO-13437 - Geosynthetics - Installing and retrieving samples in the field for durability assessment
- ISO-13438 - Geosynthetics - Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation
- ISO-18198 - Determination of long-term flow of geosynthetic drains
- ISO-18228-1 - Design using geosynthetics - Part 1: General
- ISO-18228-10 - Design using geosynthetics - Part 10: Asphalt pavements
- ISO-18228-2 - Design using geosynthetics - Part 2: Separation
- ISO-18228-3 - Design using geosynthetics - Part 3: Filtration
- ISO-18228-4 - Design using geosynthetics - Part 4: Drainage
- ISO-18228-6 - Design using geosynthetics - Part 6: Protection
- ISO-18228-7 - Design using geosynthetics - Part 7: Reinforcement
- ISO-18228-9 - Design using geosynthetics - Part 9: Barriers
- ISO-18325 - Geosynthetics - Test method for the determination of water discharge capacity for prefabricated vertical drains
- ISO-19708 - Geosynthetics - Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method
- ISO-20432 - Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
- ISO-22182 - Geotextiles and geotextile-related products - Determination of index abrasion resistance characteristics under wet conditions for hydraulic applications
- ISO-25619-1 - Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties
- ISO-25619-2 - Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour
- ISO-9862 - Geosynthetics - Sampling and preparation of test specimens
- ISO-9863-1 - Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
- ISO-9863-1-AM1 - - Amendment 1
- ISO-9863-2 - Geotextiles and geotextile-related products -- Determination of thickness at specified pressures -- Part 2: Procedure for determination of thickness of single layers of multilayer products
- ISO-9864 - Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
Other SDOs:
- DIN-EN-13249 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion); German version EN 13249:2016
- DIN-EN-13250 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways; German version EN 13250:2016
- DIN-EN-13251 - Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures; German version EN 13251:2016
- DIN-EN-13252 - Geotextiles and geotextile-related products - Characteristics required for use in drainage systems; German version EN 13252:2016
- DIN-EN-13253 - Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments); German version EN 13253:2016
- DIN-EN-13254 - Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams; German version EN 13254:2016
- DIN-EN-13255 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals; German version EN 13255:2016
- DIN-EN-13256 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures; German version EN 13256:2016
- DIN-EN-13257 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals; German version EN 13257:2016
- DIN-EN-13265 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects; German version EN 13265:2016
- DIN-EN-13361 - Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams; German version EN 13361:2013
- DIN-EN-13362 - Geosynthetic barriers - Characteristics required for use in the construction of canals; German version EN 13362:2013
- DIN-EN-13491 - Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures; German version EN 13491:2013
- DIN-EN-13492 - Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment; German version EN 13492:2013
- DIN-EN-13493 - Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites; German version EN 13493:2013
- DIN-EN-13719 - Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers; German version EN 13719:2016
- DIN-EN-13738 - Geotextiles & GEOTEXTILE-Related Products, Determination of Pullout Resistance in Soi
- DIN-EN-14150 - Geosynthetic Barriers - Determination of Permeability To Liquids
- DIN-EN-14196 - Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers; German version EN 14196:2016
- DIN-EN-14574 - Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics; German version EN 14574:2015
- DIN-EN-14575 - Geosynthetic Barriers, Screening Test Method for Determining the Resistance To Oxidati
- DIN-EN-14576 - Geosynthetics, Test Method for Determining the Resistance of Polymeric Geosynthetic Ba
- DIN-EN-ISO-12236 - Geosynthetics - Static Puncture Test (Cbr Test)
- DIN-EN-ISO-12957-1 - Part 1: Direct Shear Test, Geosynthetics, Determination of Friction Characteristics
- DIN-EN-ISO-12957-2 - Part 2: Inclined Plane Test, Geosynthetics, Determination of Friction Characteristics
- DIN-EN-ISO-13426-2 - Part 2: Geocomposites, Geotextiles & GEOTEXTILE-Related Products - Strength of Interna
- DIN-EN-ISO-13428 - Geosynthetics, Determination of the Protection Efficiency of a Geosynthetic Against Im
- DIN-EN-ISO-13433 - Geosynthetics - Dynamic Perforation Test (Cone Drop Test)
- DIN-EN-ISO-13438 - Geotextiles & GEOTEXTILE-Related Products, Screening Test Method for Determining the R
- DIN-EN-ISO-9862 - Geosynthetics, Sampling & Preparation of Test Specimens
- DIN-EN-ISO-9863-1 - Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
- DIN-EN-ISO-9864 - Geosynthetics, Test Method for the Determination of Mass per Unit Area of Geotextiles
- EN-13249 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
- EN-13250 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
- EN-13251 - Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
- EN-13252 - Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
- EN-13253 - Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
- EN-13254 - Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
- EN-13255 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
- EN-13256 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
- EN-13257 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
- EN-13265 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
- EN-13361 - Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
- EN-13362 - Geosynthetic barriers - Characteristics required for use in the construction of canals
- EN-13491 - Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures
- EN-13492 - Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- EN-13493 - Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
- EN-13719 - Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
- EN-13738 - Geotextiles & GEOTEXTILE-Related Products, Determination of Pullout Resistance in Soi
- EN-14150 - Geosynthetic Barriers - Determination of Permeability To Liquids
- EN-14151 - Geosynthesis - Determination of Burst Strength
- EN-14196 - Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
- EN-14571 - Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
- EN-14574 - Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
- EN-14575 - Geosynthetic Barriers, Screening Test Method for Determining the Resistance To Oxidati
- EN-14576 - Geosynthetics, Test Method for Determining the Resistance of Polymeric Geosynthetic Ba
- EN-15381 - Geotextiles & GEOTEXTILE-Related Products, Characteristics Required for Use in Pavemen
- EN-15382 - Geosynthetic barriers - Characteristics required for use in transportation infrastructure
- EN-16416 - Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
- EN-16993 - Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
- EN-16994 - Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
- EN-17096 - Geosynthetics - Test method for the determination of the strain hardening modulus of PE-HD geosynthetic barriers
- EN-918 - Geotextiles & GEOTEXTILE-Related Products, Dynamic Perforation Test (Cone Drop Test)
- EN-965 - Geotextiles & GEOTEXTILE-Related Products, Determination of Mass per Unit Area of Geo
- EN-ISO-10318 - Geosynthetics, Terms & Definitions
- EN-ISO-10318-1 - Geosynthetics - Part 1: Terms and definitions
- EN-ISO-10318-2 - Geosynthetics - Part 2: Symbols and pictograms
- EN-ISO-10319 - Geosynthetics - Wide-width tensile test
- EN-ISO-10321 - Geotextiles, Tensile Test for Joints/Seams by Wide-Width Strip Method
- EN-ISO-10722 - Geosynthetics, Index Test Procedure for the Evaluation of Mechanical Damage Under Repe
- EN-ISO-10769 - Clay geosynthetic barriers - Determination of water absorption of bentonite
- EN-ISO-10772 - Geotextiles - Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions (ISO 10772:2012)
- EN-ISO-10773 - Clay geosynthetic barriers - Determination of permeability to gases (ISO 10773:2011)
- EN-ISO-10776 - Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012)
- EN-ISO-11058 - Geotextiles & GEOTEXTILE-Related Products, Determination of Water Permeability Charac
- EN-ISO-12236 - Geosynthetics - Static Puncture Test (Cbr Test)
- EN-ISO-12956 - Geotextiles & GEOTEXTILE-Related Products - Determination of the Characteristic Openin
- EN-ISO-12957-1 - Part 1: Direct Shear Test, Geosynthetics, Determination of Friction Characteristics
- EN-ISO-12957-2 - Part 2: Inclined Plane Test, Geosynthetics, Determination of Friction Characteristics
- EN-ISO-12958 - Geotextiles & GEOTEXTILE-Related Products - Determination of Water Flow Capacity in Th
- EN-ISO-13426-2 - Part 2: Geocomposites, Geotextiles & GEOTEXTILE-Related Products - Strength of Interna
- EN-ISO-13427 - Geosynthetics - Abrasion damage simulation (sliding block test)
- EN-ISO-13428 - Geosynthetics, Determination of the Protection Efficiency of a Geosynthetic Against Im
- EN-ISO-13431 - Geotextiles & GEOTEXTILES-Related Products, Determination of Tensile Creep & Creep Rup
- EN-ISO-13433 - Geosynthetics - Dynamic Perforation Test (Cone Drop Test)
- EN-ISO-13438 - Geotextiles & GEOTEXTILE-Related Products, Screening Test Method for Determining the R
- EN-ISO-25619-1 - Part 1: Compressive Creep Properties, Geosynthetics - Determination of Compression Beh
- EN-ISO-25619-2 - Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour
- EN-ISO-9862 - Geosynthetics, Sampling & Preparation of Test Specimens
- EN-ISO-9863-1 - Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
- EN-ISO-9864 - Geosynthetics, Test Method for the Determination of Mass per Unit Area of Geotextiles
- SIS-CEN/TR-15019 - Geotextiles and geotextile-related products - On-site quality control
- SIS-CEN/TS-14416 - Geosynthetic barriers - Test method for determining the resistance to roots
- SIS-CEN/TS-14417 - Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers
- SIS-CEN/TS-14418 - Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
- SIS-ISO/TR-20432 - Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
- SIS-ISO/TS-13434 - Geosynthetics - Guidelines for the assessment of durability
- SIS-ISO/TS-19708 - Geosynthetics - Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method , IDT)
- SMS-ISO-3285 - Road vehicles - Ignition coil fixing band
- SS-EN-12224 - Geotextiles and geotextile-related products - Determination of resistance to weathering
- SS-EN-12225 - Geosynthetics - Method for determining the microbiological resistance by a soil burial test
- SS-EN-12226 - Geosynthetics - General tests for evaluation following durability testing
- SS-EN-12447 - Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water
- SS-EN-13249 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
- SS-EN-13249-AM1 - Geotextiles and geotextile-related products - Required characteristics for use in the construction of roads and other trafficked areas
- SS-EN-13250 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
- SS-EN-13250-AM1 - Geotextiles and geotextile-related products - Required characteristics for use in the construction of railways
- SS-EN-13251 - Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
- SS-EN-13251-AM1 - Geotextiles and geotextile-related products - Required characteristics for use in earthworks, foundations and retaining structures
- SS-EN-13252 - Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
- SS-EN-13252-AM1 - Geotextiles and geotextile-related products - Required characteristics for use in drainage systems
- SS-EN-13253 - Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
- SS-EN-13253-AM1 - Geotextiles and geotextile-related products - Required characteristics for use in external erosion control systems
- SS-EN-13254 - Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
- SS-EN-13254-AM1 - Geotextiles and geotextile-related products - Required characteristics for use in the construction of reservoirs and dams
- SS-EN-13255 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
- SS-EN-13255-AM1 - Geotextiles and geotextile-related products - Required characteristics for use in the construction of canals
- SS-EN-13256 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
- SS-EN-13256-AM1 - Geotextiles and geotextile-related products - Required characteristics for use in the construction of tunnels and underground structures
- SS-EN-13257 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
- SS-EN-13257-AM1 - Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
- SS-EN-13265 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
- SS-EN-13265-AM1 - Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
- SS-EN-13361 - Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
- SS-EN-13361-AM1 - Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
- SS-EN-13362 - Geosynthetic Barriers - Characteristics required for use in the construction of canals
- SS-EN-13433 - Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A
- SS-EN-13491 - Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures
- SS-EN-13491-AM1 - Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
- SS-EN-13492 - Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- SS-EN-13492-AM1 - Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
- SS-EN-13493 - Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
- SS-EN-13562 - Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test)
- SS-EN-13719 - Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers
- SS-EN-13738 - Geotextiles and geotextile-related products - Determination of pullout resistance in soil
- SS-EN-14030 - Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alcaline liquids (ISO/TR 12960:1998, modified)
- SS-EN-14030-AM1 - Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO/TR 12960:1998, modifed)
- SS-EN-14150 - Geosynthetic barriers - Determination of permeability to liquids
- SS-EN-14151 - Geosynthetics - Determination of burst strength
- SS-EN-14196 - Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
- SS-EN-14414 - Geosynthetics - Screening test method for determining chemical resistance for landfill applications
- SS-EN-14415 - Geosynthetic barriers - Test method for determining the resistance to leaching
- SS-EN-14574 - Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
- SS-EN-14575 - Geosynthetic barriers - Screening test method for determining the resistance to oxidation
- SS-EN-14576 - Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking
- SS-EN-15381 - Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays
- SS-EN-15382 - Geosynthetic barriers - Characteristics required for use in transportation infrastructure
- SS-EN-16416 - Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
- SS-EN-16993 - Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
- SS-EN-16994 - Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures)
- SS-EN-17096 - Geosynthetics - Test method for the determination of the strain hardening modulus of PE-HD geosynthetic barriers
- SS-EN-17323 - Geosynthetics - Determination of tensile properties of Polymeric Geosynthetic Barriers
- SS-EN-17738 - Geotextiles and geotextile-related products - Damage during installation procedure - Full scale test
- SS-EN-1897 - Geotextiles and geotextile-related products - Determination of the compressive creep properties
- SS-EN-30320 - Geotextiles - Identification on site
- SS-EN-918 - Geotextiles and geotextile-related products - Dynamic performation test (cone drop test)
- SS-EN-963 - Geotextiles and geotextile-related products - Sampling and preparation of test specimens
- SS-EN-964-1 - Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 1: Single layers
- SS-EN-965 - Geotextiles and geotextile-related products - Determination of mass per unit area
- SS-EN-ISO-10318 - Geosynthetics - Terms and definitions (ISO 10318:2005)
- SS-EN-ISO-10318-1 - Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015)
- SS-EN-ISO-10318-1-AM1 - Geosynthetics - Part 1: Terms and definitions - Amendment 1 (ISO 10318-1:2015/Amd 1:2018)
- SS-EN-ISO-10318-2 - Geosynthetics - Part 2: Symbols and pictograms (ISO 10318-2:2015)
- SS-EN-ISO-10318-2-AM1 - Geosynthetics - Part 2: Symbols and pictograms - Amendment 1 (ISO 10318-2:2015/Amd 1:2018)
- SS-EN-ISO-10319 - Geosynthetics - Wide-width tensile test (ISO 10319:2015)
- SS-EN-ISO-10320 - Geosynthetics - Identification on site (ISO 10320:2019)
- SS-EN-ISO-10321 - Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008)
- SS-EN-ISO-10722 - Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019)
- SS-EN-ISO-10769 - Clay geosynthetic barriers - Determination of water absorption of bentonite (ISO 10769:2011)
- SS-EN-ISO-10772 - Geotextiles - Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions (ISO 10772:2012)
- SS-EN-ISO-10773 - Clay geosynthetic barriers - Determination of permeability to gases (ISO 10773:2011)
- SS-EN-ISO-10776 - Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012)
- SS-EN-ISO-11058 - Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2019)
- SS-EN-ISO-12236 - Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)
- SS-EN-ISO-12956 - Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2019)
- SS-EN-ISO-12957-1 - Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1:2018)
- SS-EN-ISO-12957-2 - Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005)
- SS-EN-ISO-12958 - Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:2010)
- SS-EN-ISO-12958-1 - Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 1: Index test (ISO 12958-1:2020)
- SS-EN-ISO-12958-2 - Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 2: Performance test (ISO 12958-2:2020)
- SS-EN-ISO-12960 - Geotextiles and geotextile-related products - Screening test methods for determining the resistance to acid and alkaline liquids (ISO 12960:2020)
- SS-EN-ISO-13426-1 - Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2019)
- SS-EN-ISO-13426-2 - Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13462-2:2005)
- SS-EN-ISO-13427 - Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014)
- SS-EN-ISO-13428 - Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005)
- SS-EN-ISO-13431 - Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999)
- SS-EN-ISO-13433 - Geosyntetics - Dynamic perforation test (cone drop test) (ISO 13433:2006)
- SS-EN-ISO-13437 - Geosynthetics - Installing and retrieving samples in the field for durability assessment (ISO 13437:2019)
- SS-EN-ISO-13438 - Geosynthetics - Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation (ISO 13438:2018)
- SS-EN-ISO-22744-1 - Textiles and textile products - Determination of organotin compounds - Part 1: Derivatisation method using gas chromatography (ISO 22744-1:2020)
- SS-EN-ISO-24025-2 - Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24025-2:2020)
- SS-EN-ISO-25619-1 - Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2021)
- SS-EN-ISO-25619-2 - Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015)
- SS-EN-ISO-9862 - Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2023)
- SS-EN-ISO-9863-1 - Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2016)
- SS-EN-ISO-9863-1-AM1 - Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers - Amendment 1 (ISO 9863-1:2016/Amd 1:2019)
- SS-EN-ISO-9863-2 - Geotextiles and geotextiles related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products (ISO 9863-2:1996)
- SS-EN-ISO-9864 - Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005)
- SS-ENV-12224 - Geotextiles and geotextile-related products - Determination of resistance to weathering
- SS-ENV-12225 - Geotextiles and geotextile-related products - Method for determining the microbiological resistanceby a soil burial test
- SS-ENV-12226 - Geotextiles and geotextile-related products - General tests for evaluation following durability testing
- SS-ENV-12447 - Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis
- SS-ENV-1897 - Geotextiles and geotextile-related products - Determination of the compressive creep properties
- SS-ENV-ISO-10722-1 - Geotextiles and geotextile-related products - Procedure for simulating damage during installation -Part 1: Installation i granular materials (ISO 10722-1:1998)
- SS-ENV-ISO-12960 - Geotextiles and geotextile-related products - Screening test method for determining the resistance to liquids (ISO/TR 12960:1998)
- SS-ENV-ISO-13438 - Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO/TR 13438:1999)
- STG-TR-102 - Geotextilier och liknande produkter - Riktlinjer för beständighet (ISO/TR 13434:1998)
- UNE-EN-13249 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
- UNE-EN-13250 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
- UNE-EN-13251 - Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
- UNE-EN-13252 - Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
- UNE-EN-13253 - Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
- UNE-EN-13254 - Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
- UNE-EN-13255 - Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals