Document Center is acquired by Nimonik

Document Center List of Standards on Aerospace Electric Equipment And Systems Including Avionics

ICS Code 49.060

Return to ICS Index.

Up to Level 1:

• 49 (AIRCRAFT AND SPACE VEHICLE ENGINEERING)

The following documents are a part of this series:

ASTM:

• ASTM-F2339 - Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft
• ASTM-F2490 - Standard Guide for Aircraft Electrical Load and Power Source Capacity Analysis
• ASTM-F2639 - Standard Practice for Design, Alteration, and Certification of Aircraft Electrical Wiring Systems
• ASTM-F2696 - Standard Practice for Inspection of Aircraft Electrical Wiring Systems
• ASTM-F2799 - Standard Practice for Maintenance of Aircraft Electrical Wiring Systems
• ASTM-F319 - Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
• ASTM-F3239 - Standard Specification for Aircraft Electric Propulsion Systems

BSI:

• BS-2E-21 - Pren type electric cables for aircraft
• BS-2G-100-2 - Specification for general requirements for electrical equipment and indicating instruments for aircraft. Environmental and operating conditions
• BS-2G-127 - Specification for power and current transformers for use in aircraft electrical power supply systems
• BS-2G-132 - Specification for general requirements for electromagnetically operated contactors for aircraft
• BS-2G-146 - Specification for d.c. motors for aircraft
• BS-2G-180 - Specification for permanent splicing of aircraft electrical cables
• BS-2G-191 - Specification for lighting for aircraft indicators using integral filament lamps
• BS-2G-196 - Specification for static invertors
• BS-2G-198-2 - Sleeves for aircraft electric cables and equipment wires. Specification for slip-on sleeves for identification purposes
• BS-2G-202 - Specification for design and performance requirements for airframe-fit electrical connectors for d.c. and low frequency a.c. applications
• BS-2G-210 - Specification for PTFE insulated equipment wires and cables, single and multi-core, with silver plated copper conductors (190-¦C) or nickel plated copper conductors (260-¦C)
• BS-2G-215-2 - Aircraft. Nickel-chromium and nickel-aluminium thermocouple extension cables
• BS-2G-221 - Specification for Minyvin type electric cables (metric units)
• BS-2G-223 - Specification for screen terminating devices for aircraft electric cables
• BS-2G-230 - ASTM D 3032-80Specification for General Requirements for Aircraft Electrical Cables (S
• BS-2G-232 - Specification for electric cables for general airframe or equipment interconnect use (135C), wrapped insulation
• BS-2G-238 - Specification for electric cables for general airframe or equipment interconnect use (260C), nickel plated copper and copper alloy conductors, with wrapped insulation
• BS-2G-239 - Specification for primary active lithium batteries for use in aircraft
• BS-3G-100-3 - Specification for general requirements for equipment for use in aircraft. Characteristics of aircraft electrical power supplies
• BS-3G-100-4-1 - Specification for general requirements for equipment for use in aircraft. Electrical equipment. Construction and general
• BS-3G-197 - Specification for stud-type terminal blocks for terminations on aircraft electric cables
• BS-3G-198-1 - Sleeves for aircraft electric cables and equipment wires. Specification for elastomeric sleeves for binding and identification
• BS-3G-198-2 - Sleeves for aircraft electric cables and equipment wires
• BS-3G-198-3 - Sleeves for aircraft electric cables and equipment wires. Specification for heat-shrinkable sleeving for binding, insulation and identification
• BS-3G-198-4 - Sleeves for aircraft electric cables and equipment wires
• BS-3G-210 - Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190C) or nickel plated copper conductors (260C)
• BS-3G-230 - Specification for general requirements for aircraft electrical cables (second series)
• BS-3G-233 - Specification for electric cables for general airframe or equipment interconnect use (135C), extruded insulation
• BS-4G-178-1 - Crimped joints for aircraft electrical cables and wires
• BS-4G-178-2 - Crimped joints for aircraft electrical cables and wires
• BS-4G-198-1 - Sleeves for aircraft electric cables and equipment wires
• BS-4G-198-3 - Sleeves and moulded components for aircraft electric cables and equipment wires
• BS-5G-178-1 - Crimped joints for aircraft electrical cables and wires.
• BS-6G-205-1 - Secondary batteries for aircraft
• BS-EN-16602-70-26 - Space product assurance. Crimping of high-reliability electrical connections
• BS-EN-2083 - Aerospace series. Copper and copper alloy conductors for electrical cables. Product standard
• BS-EN-2084 - Aerospace series. Cables, electrical, general purpose, with conductors in copper or copper alloy. Technical specification
• BS-EN-2084-TC - Tracked Changes. Aerospace series. Cables, electrical, general purpose, with conductors in copper or copper alloy. Technical specification
• BS-EN-2234 - Aerospace series. Cable, electrical, fire resistant. Technical specification
• BS-EN-2235 - Aerospace series. Single and multicore electrical cables, screened and jacketed. Technical specification
• BS-EN-2240-001 - Aerospace series. Lamps, incandescent
• BS-EN-2240-002 - Aerospace series. Lamps, incandescent
• BS-EN-2240-003 - Aerospace series. Lamps, incandescent
• BS-EN-2240-004 - Aerospace series. Lamps, incandescent
• BS-EN-2240-005 - Aerospace series. Lamps, incandescent. Lamp, code 73. Product standard
• BS-EN-2240-006 - Aerospace series. Lamps, incandescent
• BS-EN-2240-007 - Aerospace series. Lamps, incandescent
• BS-EN-2240-008 - Aerospace series. Lamps, incandescent
• BS-EN-2240-009 - Aerospace series. Lamps, incandescent
• BS-EN-2240-010 - Aerospace series. Lamps, incandescent
• BS-EN-2240-011 - Aerospace series. Lamps, incandescent
• BS-EN-2240-012 - Aerospace series. Lamps, incandescent
• BS-EN-2240-013 - Aerospace series. Lamps, incandescent
• BS-EN-2240-014 - Aerospace series. Lamps, incandescent
• BS-EN-2240-015 - Aerospace series. Lamps, incandescent
• BS-EN-2240-016 - Aerospace series. Lamps, incandescent
• BS-EN-2240-017 - Aerospace series. Lamps, incandescent
• BS-EN-2240-018 - Aerospace series. Lamps, incandescent
• BS-EN-2240-019 - Aerospace series. Lamps, incandescent
• BS-EN-2240-020 - Aerospace series. Lamps, incandescent
• BS-EN-2240-021 - Aerospace series. Lamps, incandescent
• BS-EN-2240-022 - Aerospace series. Lamps, incandescent
• BS-EN-2240-023 - Aerospace series. Lamps, incandescent
• BS-EN-2240-024 - Aerospace series. Lamps, incandescent
• BS-EN-2240-025 - Aerospace series. Lamps, incandescent
• BS-EN-2240-026 - Aerospace series. Lamps, incandescent
• BS-EN-2240-027 - Aerospace series. Lamps, incandescent
• BS-EN-2240-028 - Aerospace series. Lamps, incandescent
• BS-EN-2240-029 - Aerospace series. Lamps, incandescent
• BS-EN-2240-030 - Aerospace series. Lamps, incandescent
• BS-EN-2240-031 - Aerospace series. Lamps, incandescent
• BS-EN-2240-032 - Aerospace series. Lamps, incandescent
• BS-EN-2240-033 - Aerospace series. Lamps, incandescent
• BS-EN-2240-034 - Aerospace series. Lamps, incandescent
• BS-EN-2240-035 - Aerospace series. Lamps, incandescent
• BS-EN-2240-036 - Aerospace series. Lamps, incandescent
• BS-EN-2240-037 - Aerospace series. Lamps, incandescent
• BS-EN-2240-038 - Aerospace series. Lamps, incandescent
• BS-EN-2240-039 - Aerospace series. Lamps, incandescent
• BS-EN-2240-040 - Aerospace series. Lamps, incandescent
• BS-EN-2240-041 - Aerospace series. Lamps, incandescent
• BS-EN-2240-042 - Aerospace series. Lamps, incandescent
• BS-EN-2240-043 - Aerospace series. Lamps, incandescent
• BS-EN-2240-044 - Aerospace series. Lamps, incandescent
• BS-EN-2240-045 - Aerospace series. Lamps, incandescent
• BS-EN-2240-046 - Aerospace series. Lamps, incandescent
• BS-EN-2240-047 - Aerospace series. Lamps, incandescent
• BS-EN-2240-048 - Aerospace series. Lamps, incandescent
• BS-EN-2240-049 - Aerospace series. Lamps, incandescent
• BS-EN-2240-050 - Aerospace series. Lamps, incandescent
• BS-EN-2240-071 - Aerospace series. Lamps, incandescent
• BS-EN-2240-072 - Aerospace series. Lamps, incandescent
• BS-EN-2240-073 - Aerospace series. Lamps, incandescent
• BS-EN-2240-074 - Aerospace series. Lamps, incandescent
• BS-EN-2240-075 - Aerospace series. Lamps, incandescent
• BS-EN-2240-076 - Aerospace series. Lamps, incandescent
• BS-EN-2240-077 - Aerospace series. Lamps, incandescent
• BS-EN-2240-078 - Aerospace series. Lamps, incandescent
• BS-EN-2240-079 - Aerospace series. Lamps, incandescent
• BS-EN-2240-080 - Aerospace series. Lamps, incandescent
• BS-EN-2240-081 - Aerospace series. Lamps, incandescent
• BS-EN-2240-082 - Aerospace series. Lamps, incandescent
• BS-EN-2240-083 - Aerospace series. Lamps, incandescent
• BS-EN-2240-084 - Aerospace series. Lamps, incandescent
• BS-EN-2240-085 - Aerospace series. Lamps, incandescent
• BS-EN-2240-086 - Aerospace series. Lamps, incandescent
• BS-EN-2240-087 - Aerospace series. Lamps, incandescent
• BS-EN-2240-088 - Aerospace series. Lamps, incandescent
• BS-EN-2240-089 - Aerospace series. Lamps, incandescent
• BS-EN-2240-091 - Aerospace series. Lamps, incandescent
• BS-EN-2240-092 - Aerospace series. Lamps, incandescent
• BS-EN-2240-093 - Aerospace series. Lamps, incandescent
• BS-EN-2240-094 - Aerospace series. Lamps, incandescent
• BS-EN-2240-095 - Aerospace series. Lamps, incandescent
• BS-EN-2240-096 - Aerospace series. Lamps, incandescent
• BS-EN-2240-097 - Aerospace series. Lamps, incandescent
• BS-EN-2240-098 - Aerospace series. Lamps, incandescent
• BS-EN-2240-099 - Aerospace series. Lamps, incandescent
• BS-EN-2240-100 - Aerospace series. Lamps, incandescent
• BS-EN-2240-101 - Aerospace series. Lamps, incandescent
• BS-EN-2241 - Aerospace series. Lamp caps. Dimensions
• BS-EN-2242 - Aerospace series. Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
• BS-EN-2266-002 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2266-003 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2266-005 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2266-007 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2266-008 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 C and 200 C
• BS-EN-2266-008-TC - Tracked Changes. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 C and 200 C
• BS-EN-2267-002 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 C and 260 C
• BS-EN-2267-003 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2267-005 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2267-007 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2267-008 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2267-009 - Aerospace series. Cables, electrical, for general purpose - Operating temperatures between -55 C and 260 C
• BS-EN-2267-010 - Aerospace series. Cables, electrical, for general purpose - Operating temperatures between -55 C and 260 C
• BS-EN-2267-010-TC - Tracked Changes. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C
• BS-EN-2267-011 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -65 C and 260 C
• BS-EN-2267-012 - Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -65 C and 260 C
• BS-EN-2282 - Characteristics of aircraft electrical supplies
• BS-EN-2283 - Aerospace series. Testing of aircraft wiring
• BS-EN-2346-002 - Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65C and 260C
• BS-EN-2346-003 - Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65C and 260C
• BS-EN-2346-004 - Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65C and 260C
• BS-EN-2346-005 - Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65 C and 260 C
• BS-EN-2349-001 - Aerospace series. Requirements and test procedures for switching devices
• BS-EN-2349-201 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-202 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-301 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-302 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-303 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-304 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-305 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-306 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-307 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-308 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-309 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-310 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-312 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-316 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-317 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-318 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-319 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-402 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-405 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-407 - Aerospace Series. Requirements and test procedures for relays and contactors
• BS-EN-2349-409 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-410 - Aerospace series. Requirements and test procedures for relays and contactors. Mould
• BS-EN-2349-411 - Aerospace series. Requirements and test procedures for relays and contactors. Temperature change
• BS-EN-2349-412 - Aerospace series. Requirements and test procedures for relays and contactors. Seal
• BS-EN-2349-413 - Aerospace series. Requirements and test procedures for relays and contactors. Vibration, sinusoidal and random
• BS-EN-2349-414 - Aerospace series. Requirements and test procedures for relays and contactors. Mechanical shock
• BS-EN-2349-415 - Aerospace series. Requirements and test procedures for relays and contactors
• BS-EN-2349-601 - Aerospace series. Requirements and test procedures for relays and contactors. Compass safety distance
• BS-EN-2570 - Nickel-cadmium batteries. Technical specification
• BS-EN-2591 - Elements of electrical and optical connection. Test methods. General
• BS-EN-2591-100 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-100-TC - Tracked Changes. Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-210 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-211 - Elements of electrical and optical connection. Test methods. Capacitance
• BS-EN-2591-212 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-214 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-219 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-220 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-221 - Aerospace series. Elements of electrical and optical connection. Test methods. Voltage standing wave ratio (VSWR)
• BS-EN-2591-2214 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-222 - Aerospace series. Elements of electrical and optical connection. Testm ethods. Insertion loss (I.L.)
• BS-EN-2591-223 - Aerospace series. Elements of electrical and optical connection. Test methods. Measurement of characteristic impedance of a coaxial connector or contact
• BS-EN-2591-224 - Aerospace series. Elements of electrical and optical connection. Test methods. RF leakage
• BS-EN-2591-226 - Aerospace series. Elements of electrical and optical connection. Test methods. Corona level
• BS-EN-2591-227 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-228 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-306 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-307 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-308 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-310 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-315 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-315-TC - Tracked Changes. Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-316 - Elements of electrical and optical connection. Test methods. Ozone resistance
• BS-EN-2591-317 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-318 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-318-TC - Tracked Changes. Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-322 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-323 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-324 - Elements of electrical and optical connection. Test methods. Interfacial sealing
• BS-EN-2591-325 - Elements of electrical and optical connection. Test methods. Ice resistance
• BS-EN-2591-402 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-403 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-403-TC - Tracked Changes. Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-415 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-416 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-417 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-418 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-419 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-420 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-421 - Elements of electrical and optical connection. Test methods. Free fall
• BS-EN-2591-422 - Elements of electrical and optical connection. Test methods. Locking wire hole strength
• BS-EN-2591-423 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-424 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-425 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-426 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-427 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-501 - Elements of electrical and optical connection. Test methods. Soft solderability
• BS-EN-2591-502 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-503 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-505 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-506 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-507 - Elements of electrical and optical connection. Test methods. Plating porosity
• BS-EN-2591-508 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-508-TC - Tracked Changes. Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-509 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-509-TC - Tracked Changes. Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-512 - Elements of electrical and optical connection. Test methods. Effectiveness of non-removable fixing of hermetically sealed connector shell
• BS-EN-2591-513 - Elements of electrical and optical connection. Test methods. Magnetic permeability
• BS-EN-2591-514 - Elements of electrical and optical connection. Test methods. Solderability of contacts with self-contained solder and flux
• BS-EN-2591-515 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-601 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-602 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-603 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-604 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-605 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-606 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-607 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-609 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-610 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6101 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-611 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-612 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-613 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-614 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-615 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-617 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-6301 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6303 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6305 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6306 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6307 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6314 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6315 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6316 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6317 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6318 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6321 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-6323 - Aerospace series. Elements of electrical and optical connection. Test methods
• BS-EN-2591-6324 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6401 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6402 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6403 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6405 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6406 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-6415 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-701 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-702 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-703 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-704 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-705 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-706 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-707 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-708 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-709 - Elements of electrical and optical connection. Test methods
• BS-EN-2591-7301 - Elements of electrical and optical connection. Test methods
• BS-EN-2593-001 - Aerospace series. Bases for 10 A electromagnetic plug-in relays, two and four poles double thrown
• BS-EN-2665-001 - Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A
• BS-EN-2665-001-TC - Tracked Changes. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A.Technical specification.
• BS-EN-2665-004 - Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A
• BS-EN-2713-002 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2713-003 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 200 C
• BS-EN-2713-004 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2713-005 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2713-006 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2713-007 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2713-008 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 200
• BS-EN-2713-009 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2713-010 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2713-011 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 200C
• BS-EN-2713-012 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 C and 200 C
• BS-EN-2713-012-TC - Tracked Changes. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 C and 200 C
• BS-EN-2714-002 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between - 55 C and 260 C
• BS-EN-2714-003 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2714-004 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2714-005 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2714-006 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2714-007 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2714-008 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2714-009 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 C and 260 C
• BS-EN-2714-010 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2714-011 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2714-012 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55C and 260C
• BS-EN-2714-013 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 C and 260 C
• BS-EN-2714-014 - Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 C and 260 C
• BS-EN-2756 - Aerospace series. Lamps, incandescent. Test methods
• BS-EN-2794-001 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A
• BS-EN-2794-001-TC - Tracked Changes. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A.Technical specification.
• BS-EN-2794-004 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A
• BS-EN-2853 - Current ratings for electrical cables with conductor EN 2083
• BS-EN-2854-002 - Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55 C and 260 C
• BS-EN-2854-002-TC - Tracked Changes. Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55 C and 260 C
• BS-EN-2854-003 - Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55 C and 260 C
• BS-EN-2995-001 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A
• BS-EN-2995-001-TC - Tracked Changes. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A
• BS-EN-2995-004 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A
• BS-EN-2995-005 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A
• BS-EN-2995-006 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A
• BS-EN-2996-001 - Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A
• BS-EN-2996-001-TC - Tracked Changes. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A.Technical specification.
• BS-EN-2996-004 - Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A
• BS-EN-2996-005 - Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A
• BS-EN-2996-006 - Aerospace series. Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 A
• BS-EN-2997-001 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-002 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65C to 175C continuous, 200C continuous, 260C peak
• BS-EN-2997-002-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65C to 175C continuous, 200C continuous, 260C peak
• BS-EN-2997-003 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-004 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-004-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-005 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-005-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65°C to 175°C continuous, 200°C continuous, 260°C peak
• BS-EN-2997-006 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire resistant or non fire-resistant, operating temperatures -65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-006-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire resistant or non fire-resistant, operating temperatures -65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-007 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-007-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65°C to 175°C continuous, 200°C continuous, 260°C peak
• BS-EN-2997-008 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65C to 175C continuous, 200C continuous, 260C peak
• BS-EN-2997-009 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-010 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-011 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire resistant or non fire resistant, operating temperatures -65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-012 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-012-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-fire-resistant, operating temperatures. 65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-013 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire- resistant, operating temperatures -65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-014 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 C to 175 C continuous, 200 C continuous, 260 C peak
• BS-EN-2997-016 - Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65C to 175C continuous, 200C continuous, 260C peak
• BS-EN-2997-1 - Part 1: Technical Specification, Connectors, Electrical, Circular, Coupled by Threaded Rin
• BS-EN-2997-10 - Part 10: Protective Cover for Plug, Product Standard, Connectors, Electrical, Circular
• BS-EN-2997-11 - Part 11: Dummy Receptacle, Product Standard, Connectors, Electrical, Circular, Coupled
• BS-EN-2997-2 - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175-¦C continuous, 200-¦C continuous, 260-¦C peak. Specification of performance and contact arrangements
• BS-EN-2997-3 - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175-¦C continuous, 200-¦C continuous, 260-¦C peak. Square flange receptacle. Product standard
• BS-EN-2997-4 - Part 4: Jam-Nut Mounted Receptacle, Product Standard, Connectors, Electrical, Circular
• BS-EN-2997-5 - Part 5: Hermetic Square Flange Receptacle - Product Standard, Connectors, Electrical, Circ
• BS-EN-2997-6 - Part 6: Hermetic Jam-Nut Mounted Receptacle, Product Standard, Connectors, Electrical,
• BS-EN-2997-7 - Part 7: Hermetic Receptacle With Round Flange Attached by Soldering or Brazing - Produ
• BS-EN-2997-8 - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175C continuous, 200C continuous, 260C peak
• BS-EN-2997-9 - Part 9: Protective Cover for Receptacle, Product Standard, Connectors, Electrical, Cir
• BS-EN-3155-001 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-002 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-002-TC - Tracked Changes. Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-003 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-004 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-005 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-008 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-009 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-012 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-013 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-014 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-015 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-016 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-017 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-017-TC - Tracked Changes. Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-018 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-019 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-019-TC - Tracked Changes. Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-022 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-023 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-024 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-025 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-026 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-027 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-028 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-029 - Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, shielded, size 16, female, type D, crimp, class R. Product standard
• BS-EN-3155-030 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-031 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-032 - Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, 50 ohms, size 5, male, type D, crimp, class R. Product standard
• BS-EN-3155-033 - Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical,coaxial, 50 ohms, size 5, female, type D, crimp, class R. Product Standard
• BS-EN-3155-034 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-035 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-039 - Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 16, female, type D, solder, class R. Product standard
• BS-EN-3155-040 - Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 12, male, type D, solder, class R. Product standard
• BS-EN-3155-041 - Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, size 12, female, type D, solder, class R. Product standard
• BS-EN-3155-042 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-043 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-044 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-044-TC - Tracked Changes. Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-045 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-046 - Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, double crimping, class S. Product Standard
• BS-EN-3155-047 - Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, double crimping, class S. Product standard
• BS-EN-3155-052 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-053 - Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female 053, type A, crimp, class S. Product standard
• BS-EN-3155-054 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-055 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-056 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-057 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-058 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-059 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-060 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-061 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-063 - Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, 50 ohms size 1, male, type D, solder, class R. Product standard
• BS-EN-3155-064 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-065 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-066 - Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class S, size 8. Product standard
• BS-EN-3155-067 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-068 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-069 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-070 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-071 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-074 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-075 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-075-TC - Tracked Changes. Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-076 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-077 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-078 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-079 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-080 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-081 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-082 - Aerospace series. Electrical contacts used in elements of connection.
• BS-EN-3155-083 - Aerospace series. Electrical contacts used in elements of connection
• BS-EN-3155-44 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• BS-EN-3155-46 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• BS-EN-3218-001 - Aerospace series. Connectors, rectangular, with metallic shells and screw-locking
• BS-EN-3218-005 - Aerospace series. Connectors, rectangular, with metallic shells and screw-locking
• BS-EN-3218-006 - Aerospace series. Connectors, rectangular, with metallic shells and screw-locking
• BS-EN-3218-007 - Aerospace series. Connectors, rectangular, with metallic shells and screw-locking
• BS-EN-3218-008 - Aerospace series. Connectors, rectangular, with metallic shells and screw-locking
• BS-EN-3218-009 - Aerospace series. Connectors, rectangular, with metallic shells and screw-locking
• BS-EN-3218-010 - Aerospace series. Connectors, rectangular, with metallic shells and screw-locking
• BS-EN-3218-011 - Aerospace series. Connectors, rectangular, with metallic shells and screw-locking
• BS-EN-3371 - Aerospace series. Electrical bonding. Technical specification
• BS-EN-3372-001 - Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65C to 175C or 200C continuous
• BS-EN-3372-002 - Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65C to 175C or 200C continuous
• BS-EN-3372-003 - Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65C to 175C or 200C continuous
• BS-EN-3372-005 - Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65C to 175C or 200C continuous
• BS-EN-3372-006 - Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65C to 175C or 200C continuous
• BS-EN-3372-007 - Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65C to 175C or 200C continuous
• BS-EN-3372-008 - Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65C to 175C or 200C continuous
• BS-EN-3372-009 - Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65C to 175C or 200C continuous
• BS-EN-3372-011 - Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65C to 175C or 200C continuous
• BS-EN-3373-001 - Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors
• BS-EN-3373-002 - Aerospace series. Terminal lugs and in-line splices for crimping on electrical conductors. General and list of product standard
• BS-EN-3373-007 - Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors
• BS-EN-3373-008 - Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors
• BS-EN-3373-010 - Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors
• BS-EN-3373-011 - Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors
• BS-EN-3373-012 - Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors
• BS-EN-3373-013 - Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors
• BS-EN-3373-014 - Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors
• BS-EN-3375-001 - Aerospace series. Cable, electrical, for digital data transmission
• BS-EN-3375-002 - Aerospace series. Cable, electrical, for digital data transmission. General
• BS-EN-3375-003 - Aerospace series. Cable, electrical, for digital data transmission
• BS-EN-3375-004 - Aerospace series. Cable, electrical, for digital data transmission
• BS-EN-3375-005 - Aerospace series. Cable, electrical, for digital data transmission
• BS-EN-3375-006 - Aerospace series. Cable, electrical, for digital data transmission
• BS-EN-3375-007 - Aerospace series. Cable, electrical, for digital data transmission
• BS-EN-3375-008 - Aerospace series. Cable, electrical, for digital data transmission
• BS-EN-3375-008-TC - Tracked Changes. Aerospace series. Cable, electrical, for digital data transmission
• BS-EN-3375-009 - Cable, electrical, for digital data transmission
• BS-EN-3375-009-TC - Tracked Changes. Cable, electrical, for digital data transmission
• BS-EN-3375-011 - Aerospace series. Cable, electrical for digital data transmission
• BS-EN-3375-011-TC - Tracked Changes. Aerospace series. Cable, electrical for digital data transmission
• BS-EN-3475-100 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-201 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-202 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-203 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-301 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-302 - Aerospace series. Cable, electrical, aircraft use. Test methods
• BS-EN-3475-303 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-304 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-305 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-306 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-307 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-401 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-402 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-403 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-404 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-405 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-407 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-408 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-409 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-410 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-411 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-411-TC - Tracked Changes. Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-412 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-413 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-414 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-415 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-416 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-417 - Aerospace series. Cables, electrical, aircraft use. Test methods. Fire resistance of cables confined inside a harness
• BS-EN-3475-418 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-501 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-502 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-503 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-504 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-505 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-505-TC - Tracked Changes. Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-506 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-507 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-508 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-509 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-510 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-511 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-512 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-513 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-513-TC - Tracked Changes. Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-514 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-515 - Aerospace series. Cable, electrical, aircraft use. Test methods. Crush resistance
• BS-EN-3475-601 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-602 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-603 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-604 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-604-TC - Tracked Changes. Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-605 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-701 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-702 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-703 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-704 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-705 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-705-TC - Tracked Changes. Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-706 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-707 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-801 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-802 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-803 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-804 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-805 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-806 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-807 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-808 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-809 - Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance unbalance
• BS-EN-3475-810 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-811 - Aerospace series. Cables, electrical, aircraft use. Test methods
• BS-EN-3475-812 - Aerospace series. Cables, electrical, aircraft use. Test methods. Return loss (VSWR)
• BS-EN-3545-001 - Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55C to 175C
• BS-EN-3545-002 - Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 C to 175 C
• BS-EN-3545-003 - Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 C to 175 C
• BS-EN-3545-004 - Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 C to 175 C
• BS-EN-3545-005 - Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 C to 175 C
• BS-EN-3545-006 - Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55C to 175C
• BS-EN-3545-007 - Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C
• BS-EN-3545-008 - Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55C to 175C
• BS-EN-3545-009 - Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C. Protective cover for plug and receptacle. Product standard
• BS-EN-3567-001 - Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B
• BS-EN-3567-003 - Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B
• BS-EN-3567-004 - Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B
• BS-EN-3645-001 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3645-001-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3645-002 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3645-002-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3645-003 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3645-003-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous
• BS-EN-3645-004 - Aerospace series. Connectors, electrical, circular, scoop- proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3645-005 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3645-006 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175C or 200C continuous
• BS-EN-3645-006-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous
• BS-EN-3645-007 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3645-007-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous
• BS-EN-3645-008 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 C or 200 C continuous
• BS-EN-3645-009 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3645-010 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3645-011 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175C or 200C continuous
• BS-EN-3645-012 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175C or 200C continuous
• BS-EN-3645-013 - Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3646-001 - Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3646-002 - Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175C or 200C continuous
• BS-EN-3646-003 - Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3646-003-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous
• BS-EN-3646-004 - Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3646-005 - Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3646-006 - Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous
• BS-EN-3646-006-TC - Tracked Changes. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous
• BS-EN-3646-007 - Aerospace series. Connectors, electrical, circular bayonet coupling, ope rating temperature 175C or 200C continuous
• BS-EN-3646-008 - Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175C or 200C continuous
• BS-EN-3646-009 - Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175C or 200C continuous
• BS-EN-3646-010 - Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175C or 200C continuous
• BS-EN-3646-011 - Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175C or 200C continuous
• BS-EN-3660-001 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-002 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-003 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-003-TC - Tracked Changes. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-004 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-005 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-005-TC - Tracked Changes. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-006 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-007 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-008 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-009 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style J, straight, sealed, for heat shrinkable boot. Product standard
• BS-EN-3660-010 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-011 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-012 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-013 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, unsealed, with cable tie strain relief. Product standard
• BS-EN-3660-014 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-015 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-016 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-017 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-018 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-019 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-020 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-021 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-022 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, composite, unsealed, with cable tie strain relief. Product standard
• BS-EN-3660-023 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-024 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Grommet nut, style A, composite. Product standard
• BS-EN-3660-025 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-026 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-027 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-031 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-032 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-033 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-034 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-035 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-036 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-037 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-038 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-062 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-062-TC - Tracked Changes. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-063 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-063-TC - Tracked Changes. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-064 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-064-TC - Tracked Changes. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-065 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-065-TC - Tracked Changes. Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3660-066 - Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
• BS-EN-3661-001 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A
• BS-EN-3661-005 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A
• BS-EN-3661-006 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A
• BS-EN-3662-001 - Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current from 20 A to 50 A
• BS-EN-3662-005 - Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A
• BS-EN-3662-006 - Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A
• BS-EN-3682-001 - Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150C continuous
• BS-EN-3682-002 - Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150C continuous
• BS-EN-3682-003 - Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150C continuous
• BS-EN-3682-004 - Aerospace series. Connectors, plug and receptacle, electrical, rect angular, interchangeable insert type, rack to panel, operatingtemperatur e 150C continuous
• BS-EN-3682-005 - Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150C continuous
• BS-EN-3682-006 - Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150C continuous
• BS-EN-3682-007 - Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150C continuous
• BS-EN-3682-008 - Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150C continuous
• BS-EN-3682-009 - Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150C continuous
• BS-EN-3708-001 - Aerospace series. Modular interconnection systems. Terminal junction systems
• BS-EN-3708-002 - Aerospace series. Modular interconnection systems. Terminal junction systems
• BS-EN-3708-003 - Aerospace series. Modular interconnection systems. Terminal junction systems
• BS-EN-3708-004 - Aerospace series. Modular interconnection systems. Terminal junction systems
• BS-EN-3708-005 - Aerospace series. Modular interconnection systems. Terminal junction systems
• BS-EN-3716-001 - Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data
• BS-EN-3716-002 - Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data
• BS-EN-3716-003 - Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data
• BS-EN-3716-004 - Aerospace series. Connectors, single-way with triaxial interface for transmission of digital data
• BS-EN-3716-005 - Aerospace series. Connector, single-way with triaxial interface, for transmission of digital data
• BS-EN-3716-006 - Aerospace series. Connector, single-way with triaxial interface, for transmission of digital data
• BS-EN-3719 - Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard
• BS-EN-3733-001 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150C continuous
• BS-EN-3733-002 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150C continuous
• BS-EN-3733-003 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150C continuous
• BS-EN-3733-004 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 C continuous
• BS-EN-3733-005 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 C continuous
• BS-EN-3733-006 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 C continuous
• BS-EN-3733-007 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150C continuous
• BS-EN-3733-008 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150C continuous
• BS-EN-3733-009 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150C continuous
• BS-EN-3733-101 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C continuous
• BS-EN-3733-103 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150C continuous
• BS-EN-3733-104 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150C continuous
• BS-EN-3733-105 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150C continuous
• BS-EN-3733-106 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150C continuous
• BS-EN-3733-108 - Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150C continuous
• BS-EN-3745-100 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-201 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-202 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-203 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable dimensions
• BS-EN-3745-205 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-301 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-302 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-303 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-305 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-306 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-401 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-402 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-404 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-405 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Low/high temperature bend test
• BS-EN-3745-406 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-407 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-410 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-411 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-411-TC - Tracked Changes. Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-412 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-412-TC - Tracked Changes. Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-501 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-502 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-503 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-504 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-505 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-506-TC - Tracked Changes. Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-507 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-508 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-509 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-510 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-511 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-512 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-513 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-514 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-601 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-602 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Toxicity
• BS-EN-3745-603 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Nuclear radiation
• BS-EN-3745-701 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-703 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3745-705 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
• BS-EN-3773-001 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A
• BS-EN-3773-004 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A
• BS-EN-3773-006 - Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A
• BS-EN-3774-001 - Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A
• BS-EN-3774-004 - Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A
• BS-EN-3774-004-TC - Tracked Changes. Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A
• BS-EN-3774-006 - Aerospace series. Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 A
• BS-EN-3830 - Aerospace series. Electrical system. Load analysis
• BS-EN-3838 - Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables
• BS-EN-3838-TC - Tracked Changes. Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables
• BS-EN-3841-100 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-201 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-202 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-301 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-302 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-303 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-304 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-306 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-308 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-401 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-402 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-405 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-406 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-503 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-504 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-505 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-506 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-507 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-508 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-509 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-510 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3841-511 - Aerospace series. Circuit breakers. Test methods
• BS-EN-3909 - Aerospace series. Test fluids and test methods for electrical and optical components and sub-assemblies
• BS-EN-4008-001 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-002 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-003 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-004 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-005 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-006 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-007 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-008 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-011 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-012 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-013 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-014 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-015 - Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories. Positioner for crimping tool M22520/2-01. Product standard
• BS-EN-4008-017 - Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories
• BS-EN-4008-018 - Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories
• BS-EN-4049-001 - Aerospace series. Thermocouple extension cable. Operating temperatures between -65C and 260C
• BS-EN-4049-002 - Aerospace series. Thermocouple extension cable. Operating temperatures between -65C and 260C
• BS-EN-4049-003 - Aerospace series. Thermocouple extension cable. Operating temperatures between -65C and 260C
• BS-EN-4049-004 - Aerospace series. Thermocouple extension cable. Operating temperatures between -650DC and 260C
• BS-EN-4056-001 - Aerospace series. Cable ties for harnesses
• BS-EN-4056-001-TC - Tracked Changes. Aerospace series. Cable ties for harnesses
• BS-EN-4056-002 - Aerospace series. Cable ties for harnesses
• BS-EN-4056-003 - Aerospace series. Cable ties for harnesses
• BS-EN-4056-004 - Aerospace series. Cable ties for harnesses
• BS-EN-4056-005 - Aerospace series. Cable ties for harnesses
• BS-EN-4056-006 - Aerospace series. Cable ties for harnesses
• BS-EN-4057-100 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-201 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-202 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-301 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-302 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-303 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-304 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-305 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-306 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-307 - Cable ties for harnesses. Test methods
• BS-EN-4057-401 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-402 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-404 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-405 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-406 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4057-407 - Aerospace series. Cable ties for harnesses. Test methods
• BS-EN-4165-001 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous. Technical specification
• BS-EN-4165-002 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous
• BS-EN-4165-002-TC - Tracked Changes. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous
• BS-EN-4165-003 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous
• BS-EN-4165-004 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-005 - Aerospace series. Connectors, electrical, rectangular, Modular. Operating temperatures 175 C continuous
• BS-EN-4165-006 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-007 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-008 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-009 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-010 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-011 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-012 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous
• BS-EN-4165-013 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous
• BS-EN-4165-014 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous
• BS-EN-4165-015 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-016 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-017 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-018 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous
• BS-EN-4165-020 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-021 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-022 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous
• BS-EN-4165-023 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4165-024 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous
• BS-EN-4165-025 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous
• BS-EN-4165-026 - Aerospace series. Connector, electrical, rectangular, modular. Operating temperature 175 C continuous
• BS-EN-4165-026-TC - Tracked Changes. Aerospace series. Connector, electrical, rectangular, modular. Operating temperature 175°C continuous
• BS-EN-4165-027 - Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175C continuous
• BS-EN-4199-001 - Aerospace series. Bonding straps for aircraft
• BS-EN-4199-002 - Aerospace series. Bonding straps for aircraft
• BS-EN-4199-003 - Aerospace series. Bonding straps for aircraft
• BS-EN-4199-004 - Aerospace series. Bonding straps for aircraft
• BS-EN-4199-005 - Aerospace series. Bonding straps for aircraft
• BS-EN-4199-006 - Aerospace series. Bonding straps for aircraft
• BS-EN-4420 - Aerospace series. Clips, spring tension, in alloy steel FE-PA3903
• BS-EN-4434 - Aerospace series. Copper or copper alloy lightweight conductors for electrical cables. Product standard (normal and tight tolerances)
• BS-EN-4529-001 - Aerospace series. Elements of electrical and optical connection. Sealing plugs
• BS-EN-4529-002 - Aerospace series. Elements of electrical and optical connection. Sealing plugs
• BS-EN-4529-003 - Aerospace series. Elements of electrical and optical connection. Sealing plugs
• BS-EN-4530-001 - Aerospace series. Sealing sleeves used in elements of connection
• BS-EN-4530-002 - Aerospace series. Sealing sleeves used in elements of connection
• BS-EN-4530-002-TC - Tracked Changes. Aerospace series. Sealing sleeves used in elements of connection
• BS-EN-4530-005 - Aerospace series. Sealing sleeves used in elements of connection
• BS-EN-4530-006 - Aerospace series. Sealing sleeves used in elements of connection
• BS-EN-4531-001 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts
• BS-EN-4531-002 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts
• BS-EN-4531-003 - Aerospace series. Connectors, optical, circular, single andmultipin, coupled by triple start threaded ring. Flushcontacts
• BS-EN-4531-004 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flushcontacts
• BS-EN-4531-005 - Aerospace series. Connectors, optical, circular, single andmultipin, coupled by triple start threaded ring. Flushcontacts
• BS-EN-4531-101 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts
• BS-EN-4531-901 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Filler plugs. Product standard
• BS-EN-4532 - Aerospace series. Cables, optical, single core 200 ?m/280 ?m fibre, 2,5 mm outer jacket. Technical specification
• BS-EN-4533-001 - Aerospace series. Fibre optic systems. Handbook
• BS-EN-4533-001-TC - Tracked Changes. Aerospace series. Fibre optic systems. Handbook
• BS-EN-4533-002 - Aerospace series. Fibre optic systems. Handbook
• BS-EN-4533-002-TC - Tracked Changes. Aerospace series. Fibre optic systems. Handbook
• BS-EN-4533-004 - Aerospace series. Fibre optic systems. Handbook
• BS-EN-4533-004-TC - Tracked Changes. Aerospace series. Fibre optic systems. Handbook
• BS-EN-4592 - Aerospace series. Paints and varnishes. Test method for determination of infrared reflectance
• BS-EN-4604-001 - Aerospace series. Cable, electrical, for signal transmission
• BS-EN-4604-002 - Aerospace series. Cable, electrical, for signal transmission
• BS-EN-4604-003 - Aerospace series. Cable, electrical, for signal transmission
• BS-EN-4604-004 - Aerospace series. Cable, electrical, for signal transmission
• BS-EN-4604-005 - Aerospace series. Cable, electrical, for signal transmission
• BS-EN-4604-006 - Aerospace series. Cable, electrical, for signal transmission
• BS-EN-4604-007 - Aerospace series. Cable, electrical, for signal transmission
• BS-EN-4604-008 - Aerospace series. Cable, electrical, for signal transmission
• BS-EN-4604-009 - Aerospace series. Cable, electrical, for signal transmission
• BS-EN-4604-010 - Aerospace series. Cable, electrical, for signal transmission
• BS-EN-4604-010-TC - Tracked Changes. Aerospace series. Cable, electrical, for signal transmission
• BS-EN-4608-001 - Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between - 65 C and 260 C
• BS-EN-4608-002 - Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65C and 260C
• BS-EN-4608-003 - Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 C and 260 C
• BS-EN-4608-004 - Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between - 65C and 260C
• BS-EN-4608-005 - Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 C and 260 C
• BS-EN-4611-002 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family
• BS-EN-4611-003-TC - Tracked Changes. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family
• BS-EN-4611-004 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family
• BS-EN-4611-004-TC - Tracked Changes. Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family
• BS-EN-4611-005 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family
• BS-EN-4611-006 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family
• BS-EN-4611-007 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family
• BS-EN-4611-008 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family
• BS-EN-4611-009 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family
• BS-EN-4612-002 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4612-003 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4612-004 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4612-005 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4612-006 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4612-007 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4612-008 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4612-009 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4612-010 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4612-011 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4612-012 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4612-013 - Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed
• BS-EN-4626-001 - Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 C to 125 C (cable dependent). Flush contacts
• BS-EN-4626-002 - Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65C to 125C (cable dependent). Flush contacts
• BS-EN-4626-003 - Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65C to 125C (cable dependent). Flush contacts
• BS-EN-4626-004 - Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65C to 125C (cable dependent). Flush contacts
• BS-EN-4626-101 - Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65C to 125C (cable dependent). Flush contacts
• BS-EN-4626-201 - Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 C to 125 C (cable dependent). Flush contacts
• BS-EN-4626-202 - Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65C to 125C (cable dependent). Flush contacts
• BS-EN-4639-001 - Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder
• BS-EN-4639-002 - Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder
• BS-EN-4639-003 - Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder
• BS-EN-4639-004 - Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Female optical module. Product standard
• BS-EN-4639-005 - Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Removable alignment sleeve holder. Product standard
• BS-EN-4639-101 - Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder
• BS-EN-4639-102 - Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder
• BS-EN-4640-001 - Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder
• BS-EN-4640-002 - Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. List of product standards
• BS-EN-4640-003 - Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder
• BS-EN-4640-004 - Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder
• BS-EN-4641-001 - Aerospace series. Cables, optical, 125 m diameter cladding
• BS-EN-4641-001-TC - Tracked Changes. Aerospace series. Cables, optical, 125Μm diameter cladding
• BS-EN-4641-102 - Aerospace series. Cables, optical 125 m outside diameter cladding
• BS-EN-4641-301-TC - Tracked Changes. Aerospace series. Cables, optical, 125 m diameter cladding
• BS-EN-4644-001 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-002 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-003 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-011 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-012 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-013 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-014 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-021 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175C (or 125C) continuous
• BS-EN-4644-022 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175C (or 125C) continuous
• BS-EN-4644-023 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175C (or 125C) continuous
• BS-EN-4644-024 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-025 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-026 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-131 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-133 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-141 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-142 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4644-201 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
• BS-EN-4645-001 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder
• BS-EN-4645-002 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Specification of performance and contact arrangements
• BS-EN-4645-003 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Square flange receptacle. Product standard
• BS-EN-4645-004 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Jam nut receptacle. Product standard
• BS-EN-4645-005 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Plug. Product standard
• BS-EN-4650 - Aerospace series. Wire and cable marking process, UV Laser
• BS-EN-4651 - Aerospace series. Copper-clad aluminium alloy conductors for electrical cables. Product standard
• BS-EN-4652-001 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-002 - Aerospace series. Connectors, coaxial, radiofrequency
• BS-EN-4652-110 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-111 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-112 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-113 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-211 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-212 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-220 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-221 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-222 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-310 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-313 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-320 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-321 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-322 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-410 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-411 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-420 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4652-421 - Aerospace series. Connectors, coaxial, radio frequency
• BS-EN-4674-001 - Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve
• BS-EN-4674-002 - Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve
• BS-EN-4674-003 - Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve
• BS-EN-4674-004 - Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve
• BS-EN-4681-001 - Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium
• BS-EN-4681-001-TC - Tracked Changes. Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium
• BS-EN-4681-002 - Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium
• BS-EN-4681-005 - Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium
• BS-EN-4681-006 - Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium
• BS-EN-4703 - Aerospace series. Test specification for verification of the permeability of electrical insulation
• BS-EN-4708-001 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-101 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-102 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-103 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-104 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-105 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-106 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-107 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-108 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-201 - Aerospace series. Sleeves, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-203 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-204 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4708-301 - Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification
• BS-EN-4728 - Aerospace series. Circuit breakers, single and three poles dummies. Product standard
• BS-EN-4830-003 - Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts
• BS-EN-4830-004 - Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts
• BS-EN-4838-001 - Aerospace series. Arc Fault Circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A. 115 V a.c. 400 Hz Constant Frequency
• BS-EN-4838-004 - Aerospace series. Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A. 115 V a.c. 400 Hz constant frequency
• BS-EN-4838-005 - Aerospace series. Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A. 115 V a.c. 400 Hz Constant Frequency
• BS-EN-4839-001 - Aerospace series. Arc fault circuit breakers, three-poles, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency
• BS-EN-4839-003 - Aerospace series. Arc Fault Circuit breakers, three-pole, temperature compensated, rated currents 3 A to 25 A, 115/200 V a.c. 400 Hz constant frequency
• BS-EN-4840-001 - Aerospace series. Heat shrinkable moulded shapes
• BS-EN-4840-002 - Aerospace series. Heat shrinkable moulded shapes
• BS-EN-4840-101 - Aerospace series. Heat shrinkable moulded shapes
• BS-EN-4840-103 - Aerospace series. Heat-shrinkable moulded shapes
• BS-EN-4880 - Aerospace series. General technical specification for standard parts
• BS-EN-50389 - Space product assurance. Wire-wrapping of high reliability electrical connections
• BS-EN-6049-001 - Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres
• BS-EN-6049-002 - Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres
• BS-EN-6049-003 - Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres
• BS-EN-6049-003-TC - Tracked Changes. Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres
• BS-EN-6049-004 - Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres
• BS-EN-6049-005 - Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres
• BS-EN-6049-006 - Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Self-wrapping protective sleeve, flexible post installation. Product standard
• BS-EN-6049-007 - Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres
• BS-EN-6049-008 - Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres
• BS-EN-6049-009 - Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres
• BS-EN-6059-100 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-202 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-301 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-302 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-303 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-304 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-305 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-308 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-309 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-401 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-402 - Aerospace Series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-406 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-501 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-502 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-503 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-504 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6059-601 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
• BS-EN-6093 - Aerospace series. Receptacle, floating, single lug
• BS-EN-60952-1 - Aircraft batteries
• BS-EN-60952-2 - Aircraft batteries
• BS-EN-60952-3 - Aircraft batteries
• BS-EN-6113 - Aerospace series. Circuit breaker, connecting and attachment hardware
• BS-EN-IEC-62668-1 - Process management for avionics. Counterfeit prevention
• BS-G-142 - Specification for heavy duty, electro-magnetically operated, single-pole circuit-breakers for extra-low voltage d.c. systems in aircraft
• BS-G-174 - Invertors for secondary electrical supplies for aircraft
• BS-G-176-1 - Specification for cartridge fuses for aircraft. General requirements
• BS-G-176-2 - Specification for cartridge fuses for aircraft. Cartridge fuses and fuse-links (Type A)
• BS-G-176-3 - Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type B)
• BS-G-176-4 - Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type C)
• BS-G-176-5 - Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type D)
• BS-G-177 - Specification for Nyvin type electrical cables for aircraft
• BS-G-179-1 - Specification for hand-operated circuit-breakers for aircraft. Single-pole circuit-breakers
• BS-G-179-2 - Specification for hand-operated circuit-breakers for aircraft. Three-pole circuit-breakers
• BS-G-184-TO-G-188 - Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables
• BS-G-189 - Specification for Tersil type electrical cables for aircraft
• BS-G-191 - Specification for lighting for aircraft indicators using integral filament lamps
• BS-G-192 - Specification for Efglas type electric cables with copper conductors for aircraft
• BS-G-193 - Specification for aircraft lampholders
• BS-G-195 - Specification for Minyvin type electric cables for aircraft
• BS-G-198-5 - Sleeves and moulded components for aircraft electric cables and equipment wires
• BS-G-202 - Specification for design and performance requirements for aircraft electrical plugs and sockets for d.c. and low frequency a.c. applications
• BS-G-207 - Specification for aircraft electrical circuit diagrams
• BS-G-208 - Specification for general requirements for electrical relays up to 10 A rating
• BS-G-209 - Specification for transformer rectifier units
• BS-G-210 - Specification for PTFE insulated equipment wires (with silver plated copper conductors)
• BS-G-212 - Specification for general requirements for aircraft electrical cables
• BS-G-222 - Specification for Efglas type electric cables (metric units)
• BS-G-223 - Specification for screen terminating devices for aircraft electric cables
• BS-G-224 - Specification for lever-operated manual switches for aircraft
• BS-G-225 - Specification for performance of environment-resistant terminal junction modules with removable crimp-type contacts
• BS-G-227 - Specification for Tersil type electric cables (metric units)
• BS-G-230 - Specification for general requirements for aircraft electrical cables (second series)
• BS-G-232 - Specification for electric cables for general airframe or equipment interconnect use (135C), wrapped insulation
• BS-G-233 - Specification for electric cables for general airframe or equipment interconnect use (135C), extruded insulation
• BS-G-235 - Specification for electric cables for general airframe or equipment interconnect use (150C), wrapped insulation with silver plated conductors
• BS-G-236 - Specification for electric cables for general airframe or equipment interconnect use (200C), wrapped insulation with nickel plated conductors
• BS-G-237 - Specification for electric cables for general airframe or equipment interconnect use (200C), extruded insulation with nickel plated conductors
• BS-G-238 - Specification for electric cables for general airframe or equipment interconnect use (260-¦C), wrapped insulation with nickel plated conductors
• BS-G-241 - Specification for fire proof electric cables for engine fire zone and airframe use
• BS-G-242 - Specification for data bus interconnecting systems
• BS-G-246 - Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses
• BS-G-248 - Specification for hybrid remote power controllers. General requirements
• BS-G-253 - Specification for type 1 terminal junction systems
• BS-G-254 - Specification for type 2 terminal junction systems
• BS-G-255 - Specification for type 3 terminal junction systems
• BS-G-256 - Specification for type 4 terminal junction systems
• BS-G-264 - Specification for avionic data transmission interface systems. Utilities bus
• BS-IEC-62396-1 - Process management for avionics. Atmospheric radiation effects. Accommodation of atmospheric radiation effects via single event effects within avionics electronic equipment
• BS-IEC-62396-2 - Process management for avionics. Atmospheric radiation effects
• BS-IEC-62396-2-TC - Tracked Changes. Process management for avionics. Atmospheric radiation effects
• BS-IEC-62396-3 - Process management for avionics. Atmospheric radiation effects
• BS-IEC-62396-4 - Process management for avionics. Atmospheric radiation effects
• BS-IEC-62396-5 - Process management for avionics. Atmospheric radiation effects
• BS-ISO-13832 - Aerospace. Wire, aluminium alloy and copper-clad aluminium conductors. General performance requirements
• BS-ISO-1467 - General purpose push-pull single-pole circuit-breakers for aircraft. Performance requirements
• BS-ISO-1509 - General purpose push-pull three-pole circuit-breakers for aircraft. Performance requirements
• BS-ISO-20894 - Aircraft. LED based taxiing lightsystem. General requirements
• BS-ISO-20949 - Aircraft. Smart contactor. General requirements
• BS-ISO-24065 - Aerospace. High-power solid-state power controller. General performance requirements
• BS-ISO-24071 - Aircraft. Auto-transformer rectifier units (ATRUs). General requirements
• BS-ISO-2635 - Aircraft. Conductors for general purpose aircraft electrical cables and aerospace applications. Dimensions and characteristics
• BS-ISO-2678 - Environmental tests for aircraft equipment. Insulation resistance and high voltage tests for electrical equipment
• BS-ISO-2678-TC - Tracked Changes. Environmental tests for aircraft equipment. Insulation resistance and high voltage tests for electrical equipment
• BS-ISO-27027 - Aerospace. Solid-state remote power controllers. General performance requirements
• BS-ISO-461-1 - Aircraft. Connectors for ground electrical supplies
• BS-ISO-6858 - Aircraft. Ground support electrical supplies. General requirements
• BS-ISO-8816 - Aircraft. Solid-state remote power controllers. General requirements
• BS-ISO-8843 - Aircraft. Crimp-removable contacts for electrical connectors. Identification system
• CWA-16048 - Monitoring Legal Requirements for Cross Border E-Invoicing & Recommendation of Changes
• DD-IEC-62239 - Process management for avionics. Preparation of an electronic components management plan
• DD-IEC-62396-1 - Process management for avionics. Atmospheric radiation effects. Accommodation of atmospheric radiation effects via single event effects within avionics electronic equipment
• DD-IEC-62396-2 - Process management for avionics. Atmospheric radiation effects. Guidelines for single event effects testing for avionics systems
• DD-IEC-62396-3 - Process Management for Avionics, Atmospheric Radiation Effects, Optimizing System Desi
• DD-IEC-62396-4 - Process Management for Avionics, Atmospheric Radiation Effects, Guidelines for Designi
• DD-IEC-62396-5 - Process management for avionics. Atmospheric radiation effects
• DD-IEC-62500 - Process management for avionics. Defining and performing highly accelerated tests in aerospace systems. Application guide
• DD-IEC-62564-1 - Process management for avionics. Aerospace qualified electronic components (AQEC)
• DD-IEC/PAS-62396-2 - Process management for avionics. Atmospheric radiation effects
• DD-IEC/PAS-62396-3 - Process Management for Avionics, Atmospheric Radiation Effects, Optimising System Desi
• DD-IEC/PAS-62396-4 - Process Management for Avionics, Atmospheric Radiation Effects, Guidelines for Designi
• DD-IEC/PAS-62396-5 - Process management for avionics. Atmospheric radiation effects. Guidelines for assessing thermal neutron fluxes and effects in avionics systems
• DD-IEC/PAS-62647-23 - Process management for avionics. Aerospace and defence electronic systems containing lead-free solder
• DD-IEC/PAS-62647-3 - Process management for avionics. Aerospace and defence electronic systems containing lead-free solder
• DD-IEC/PAS-62686-1 - Process management for avionics. Aerospace qualified electronic components (AQEC)
• PD-IEC-62239-1 - Process management for avionics. Management plan
• PD-IEC-62239-2 - Process management for avionics. Management plan
• PD-IEC-62240-1-TC - Tracked Changes. Process management for avionics. Electronic components capability in operation
• PD-IEC-62240-2 - Process management for avionics. Electronic components capability in operation
• PD-IEC-62396-6 - Process management for avionics. Atmospheric radiation effects
• PD-IEC-62396-7 - Process management for avionics. Atmospheric radiation effects
• PD-IEC-62396-8 - Process management for avionics. Atmospheric radiation effects
• PD-IEC-62500-TC - Tracked Changes. Process management for avionics. Highly severe stress tests for operating margins identification and robustness improvement of avionics equipment. Application guidelines
• PD-IEC-62564-1 - Process management for avionics. Aerospace qualified electronic components (AQEC)
• PD-IEC-62564-1-TC - Tracked Changes. Process management for avionics. Aerospace qualified electronic components (AQEC)
• PD-IEC-62647-1 - Process management for avionics. Aerospace and defence electronic systems containing lead-free solder
• PD-IEC-62647-2 - Process management for avionics. Aerospace and defence electronic systems containing lead-free solder
• PD-IEC-62647-21 - Process management for avionics. Aerospace and defence electronic systems containing lead-free solder
• PD-IEC-62647-22 - Process management for avionics. Aerospace and defence electronic systems containing lead-free solder
• PD-IEC-62647-23 - Process management for avionics. Aerospace and defence electronic systems containing lead-free solder
• PD-IEC-62647-3 - Process management for avionics. Aerospace and defence electronic systems containing lead-free solder
• PD-IEC-62647-4 - Process management for avionics. Aerospace and defence electronic systems containing lead-free solder
• PD-IEC-62668-1 - Process management for avionics. Counterfeit prevention
• PD-IEC-62668-2 - Process management for avionics. Counterfeit prevention
• PD-IEC-62686-1 - Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications
• PD-IEC-62686-2 - Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications
• PD-IEC-63238-1 - Process management for avionics. Electronics design
• PD-IEC/PAS-62396-6 - Process management for avionics. Atmospheric radiation effects
• PD-IEC/PAS-62647-1 - Process management for avionics. Aerospace and defence electronic systems containing lead-free solder
• PD-IEC/PAS-62686-2 - Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications
• PD-ISO-21891 - Aerospace electrical requirements. Sleeves and moulded shapes. Specifications for aircraft use
• PD-ISO/IEC-22560 - Information technology. Sensor networks. Guidelines for design in the aeronautics industry: active air-flow control

IEC:

• IEC-60952-1 - Aircraft batteries - Part 1: General test requirements and performance levels
• IEC-60952-2 - Aircraft batteries - Part 2: Design and construction requirements
• IEC-60952-3 - Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP)
• IEC-62239 - Process management for avionics - Preparation of an electronic components management plan
• IEC-62239-1 - Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan
• IEC-62239-2 - Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan
• IEC-62240-1 - Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating
• IEC-62240-1-RL - Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating
• IEC-62240-2 - Process management for avionics . Electronic components capability in operation . Part 2: Semiconductor microcircuit lifetime
• IEC-62396-1 - Process management for avionics - Atmospheric radiation effects - Part 1: Accommodation of atmospheric radiation effects via single event effects within avionics electronic equipment
• IEC-62396-1-RL - Process management for avionics - Atmospheric radiation effects - Part 1: Accommodation of atmospheric radiation effects via single event effects within avionics electronic equipment
• IEC-62396-2 - Process management for avionics - Atmospheric radiation effects - Part 2: Guidelines for single event effects testing for avionics systems
• IEC-62396-3 - Part 3: Optimising System Design To Accommodate the Single Event Effects (See) of Atmo
• IEC-62396-4 - Process management for avionics - Atmospheric radiation effects - Part 4: Design of high voltage aircraft electronics managing potential single event effects
• IEC-62396-5 - Process management for avionics - Atmospheric radiation effects - Part 5: Guidelines for assessing thermal neutron fluxes and effects in avionics systems
• IEC-62396-6 - Process management for avionics - Atmospheric radiation effects - Part 6: Extreme space weather - Potential impact on the avionics environment and electronics
• IEC-62396-7 - Process management for avionics - Atmospheric radiation effects - Part 7: Management of single event effects (SEE) analysis process in avionics design
• IEC-62500 - Process management for avionics - Highly severe stress tests for operating margins identification and robustness improvement of avionics equipment - Application guidelines
• IEC-62564-1 - Process management for avionics - Aerospace qualified electronic components (AQEC) - Part 1: Integrated circuits and discrete semiconductors
• IEC-62647-1 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 1: Preparation for a lead-free control plan
• IEC-62647-2 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 2: Mitigation of deleterious effects of tin
• IEC-62647-21 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 21: Program management - Systems engineering guidelines for managing the transition to lead-free electronics
• IEC-62647-22 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines
• IEC-62647-23 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 23: Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies
• IEC-62647-3 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 3: Performance testing for systems containing lead-free solder and finishes
• IEC-62668-1 - Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components
• IEC-62668-1-AM1 - Amendment 1 - Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components
• IEC-62668-2 - Process management for avionics - Counterfeit prevention - Part 2: Managing electronic components from non-franchised sources
• IEC-62686-1 - Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors
• IEC-62686-2 - Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components
• IEC-63238-1 - Process management for avionics - Electronics design - Part 1: Electrical signal properties, naming conventions and interface control document (ICD)
• IEC/PAS-62396-6 - Process management for avionics - Atmospheric radiation effects - Part 6: Extreme space weather and potential impact on the avionics environment and electronics
• IEC/PAS-62647-1 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 1: Lead-free management
• IEC/PAS-62647-2 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 2: Mitigation of the deleterious effects of tin
• IEC/PAS-62647-21 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 21: Program management - Systems engineering guidelines for managing the transition to lead-free electronics
• IEC/PAS-62647-22 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines
• IEC/PAS-62647-23 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 23: Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies
• IEC/PAS-62647-3 - Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 3: Performance testing for systems containing lead-free solder and finishes
• IEC/PAS-62686-1 - Part 1: General Requirements for High Reliability Integrated Circuits & Discrete Semic
• IEC/PAS-62686-2 - Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components

ISO:

• ISO-10296 - Aircraft - Hybrid remote power controllers - General requirements
• ISO-1033 - Aircraft - Dimensions for general purpose push-pull three-pole circuit-breakers
• ISO-1198 - Sealed-beam landing lamps for aircraft - Dimensions
• ISO-12384 - Aerospace - Requirements for digital equipment for measurements of aircraft electrical power characteristics
• ISO-13832 - Aerospace - Wire, aluminium alloy and copper-clad aluminium conductors - General performance requirements
• ISO-1466 - Lever-operated manual switches for aircraft - Performance requirements
• ISO-1467 - General purpose push-pull single-pole circuit-breakers for aircraft - Performance requirements
• ISO-1509 - General purpose push-pull three-pole circuit-breakers for aircraft - Performance requirements
• ISO-1540 - Aerospace - Characteristics of aircraft electrical systems
• ISO-1547 - Aircraft - Precision fuse-links - General requirements
• ISO-1548 - Aircraft - Precision fuse-links - Type A
• ISO-1549 - Aircraft - Precision fuse-links - Type B
• ISO-1949 - Aircraft - Electrical connectors - Design requirements
• ISO-1965 - Aluminium terminal ends for crimping to aircraft aluminium electrical cables
• ISO-1966 - Crimped joints for aircraft electrical cables
• ISO-1967 - Aircraft - Fire-resisting electrical cables - Dimensions, conductor resistance and mass
• ISO-2032 - Heat-resisting equipment wires for aircraft
• ISO-2042 - Aircraft electrical circuit diagrams
• ISO-20894 - Aircraft - LED based taxiing lightsystem - General requirements
• ISO-20949 - Aircraft - Smart contactor - General requirements
• ISO-2100 - Aircraft - Electrical connectors - Tests
• ISO-2155 - Aircraft - Fire-resisting electrical cables - Performance requirements
• ISO-2156 - Aircraft - Fire-resisting electrical cables - Methods of test
• ISO-21891 - Aerospace electrical requirements - Sleeves and moulded shapes - Specifications for aircraft use
• ISO-2277 - Static invertors for aircraft
• ISO-2315 - Aircraft - Two- and four-pole sealed electromagnetic relays, 2 A and 3 A - Clearance and fixing dimensions
• ISO-24065 - Aerospace - High-power solid-state power controller - General performance requirements
• ISO-24071 - Aircraft - Auto-transformer rectifier units (ATRUs) - General requirements
• ISO-2436 - Heat-resisting equipment wires for aircraft - Methods of test
• ISO-2574 - Aircraft - Electrical cables - Identification marking
• ISO-2635 - Aircraft - Conductors for general purpose aircraft electrical cables and aerospace applications - Dimensions and characteristics
• ISO-2635-AM1 - - Amendment 1: Correction of table 1
• ISO-2678 - Environmental tests for aircraft equipment - Insulation resistance and high voltage tests for electrical equipment
• ISO-27027 - Aerospace - Solid-state remote power controllers - General performance requirements
• ISO-3282 - Aircraft - Dimensions for single-hole and triple-hole mounting (Class 3) lever-operated manual switches
• ISO-3389 - Aircraft - Radio frequency flexible coaxial cables - Dimensions and electrical characteristics
• ISO-3456 - Aircraft - Lever-operated manual switches (Class 3) - Performance requirements
• ISO-4084 - Aircraft - Repairable contactors (not hermetically sealed) - Performance requirements
• ISO-44 - Aerospace - Lever-operated, two-position, ON/OFF switches - Directions of operation
• ISO-461-1 - Aircraft - Connectors for ground electrical supplies - Part 1: Design, performance and test requirements
• ISO-461-2 - Aircraft - Connectors for ground electrical supplies - Part 2 : Dimensions
• ISO-493 - Aircraft - Dimensions for single-hole mounting (Class 1 and Class 2) lever-operated manual switches
• ISO-5066-1 - Aircraft - Hermetically sealed monostable electrical relays, 2A and 3A - Part 1 : Operating characteristics and test conditions
• ISO-5066-2 - Aircraft - Hermetically sealed monostable electrical relays, 2A and 3A - Part 2 : Type approval tests
• ISO-530 - Aircraft - General purpose push-pull single-pole circuit-breakers - Dimensions
• ISO-5843-1 - Aerospace construction - List of equivalent terms - Part 1 : Aerospace electrical equipment
• ISO-5866 - Aircraft - 2 and 3A plug-in base change-over relays, Type II, with crimped connections - Clearance and fixing dimensions
• ISO-5867-1 - Aircraft - Electromagnetic relays and contactors - Part 1: General requirements
• ISO-6858 - Aircraft - Ground support electrical supplies - General requirements
• ISO-6859-1 - Aircraft - Proximity switches - Part 1 : General requirements
• ISO-8056-1 - Aircraft - Nickel-chromium and nickel-aluminium thermocouple extension cables - Part 1 : Conductors - General requirements and tests
• ISO-8056-2 - Aircraft - Nickel-chromium and nickel-aluminium thermocouple extension cables - Part 2 : Terminations - General requirements and tests
• ISO-8056-2-AM1 - Aircraft - Nickel-chromium and nickel-aluminium thermocouple extension cables - Part 2 : Terminations - General requirements and tests - Amendment 1
• ISO-8056-3 - Aircraft - Nickel-chromium and nickel-aluminium thermocouple extension cables - Part 3 : Crimp-type ring terminal ends - Dimensions
• ISO-8056-4 - Aircraft - Nickel-chromium and nickel-aluminium thermocouple extension cables - Part 4 : Crimp-type butt connectors - Dimensions
• ISO-8668-1 - Aircraft - Terminal junction systems - Part 1 : Characteristics
• ISO-8668-2 - Aircraft - Terminal junction systems - Part 2 : Tests
• ISO-8668-3 - Aircraft - Terminal junction systems - Part 3: Detail specification for type 1 system
• ISO-8668-4 - Aircraft - Terminal junction systems - Part 4: Detail specification for type 2 system
• ISO-8668-5 - Aircraft - Terminal junction systems - Part 5: Detail specification for type 3 system
• ISO-8668-6 - Aircraft - Terminal junction systems - Part 6: Detail specification for type 4 system
• ISO-8815 - Aircraft - Electrical cables and cable harnesses - Vocabulary
• ISO-8816 - Aircraft - Solid-state remote power controllers - General requirements
• ISO-8816-AM1 - Aircraft - Solid-state remote power controllers - General requirements - Amendment 1
• ISO-8843 - Aircraft - Crimp-removable contacts for electrical connectors - Identification system
• ISO-8843-AM1 - Aircraft - Crimp-removable contacts for electrical connectors - Identification system - Amendment 1
• ISO/IEC-22560 - Information technology - Sensor networks - Use cases of aeronautics industry: Active Air-flow Control

Other SDOs:

• AS-6174 - Counterfeit Materiel; Assuring Acquisition of Authentic and Conforming Materiel
• DIN-EN-3155-079 - Aerospace series - Electrical contacts used in elements of connection - Part 079: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S - Product standard
• DS-EN-4199-001 - Aerospace series - Bonding straps for aircraft - Part 001: Technical specification
• EN-16602-70-26 - Space product assurance - Crimping of high-reliability electrical connections
• EN-2083 - Aerospace Series - Copper & Copper Alloys Conductors for Electrical Cables - Product S
• EN-2084 - Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification
• EN-2234 - Aerospace series - Cable, electrical, fire resistant - Technical specification
• EN-2235 - Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification
• EN-2240-001 - Aerospace series - Lamps, incandescent - Part 001: Technical specification
• EN-2240-002 - Aerospace series - Lamps, incandescent - Part 002: Main characteristics
• EN-2240-003 - Aerospace series - Lamps, incandescent - Part 003: Lamp, code 44 - Product standard
• EN-2240-004 - Aerospace series - Lamps, incandescent - Part 004: Lamp, code 47 - Product standard
• EN-2240-005 - Aerospace series - Lamps, incandescent - Part 005: Lamp, code 73 - Product standard
• EN-2240-006 - Aerospace series - Lamps, incandescent - Part 006: Lamp, code 73E - Product standard
• EN-2240-007 - Aerospace series - Lamps, incandescent - Part 007: Lamp, code 74 - Product standard
• EN-2240-008 - Aerospace series - Lamps, incandescent - Part 008: Lamp, code 75 - Product standard
• EN-2240-009 - Aerospace series - Lamps, incandescent - Part 009: Lamp, code 83 - Product standard
• EN-2240-010 - Aerospace series - Lamps, incandescent - Part 010: Lamp, code 84 - Product standard
• EN-2240-011 - Aerospace series - Lamps, incandescent - Part 011: Lamp, code 85 - Product standard
• EN-2240-012 - Aerospace series - Lamps, incandescent - Part 012: Lamp, code 95 - Product standard
• EN-2240-013 - Aerospace series - Lamps, incandescent - Part 013: Lamp, code 301 - Product standard
• EN-2240-014 - Aerospace series - Lamps, incandescent - Part 014: Lamp, code 303 - Product standard
• EN-2240-015 - Aerospace series - Lamps, incandescent - Part 015: Lamp, code 304 - Product standard
• EN-2240-016 - Aerospace series - Lamps, incandescent - Part 016: Lamp, code 305 - Product standard
• EN-2240-017 - Aerospace series - Lamps, incandescent - Part 017: Lamp, code 306 - Product standard
• EN-2240-018 - Aerospace series - Lamps, incandescent - Part 018: Lamp, code 307 - Product standard
• EN-2240-019 - Aerospace series - Lamps, incandescent - Part 019: Lamp, code 308 - Product standard
• EN-2240-020 - Aerospace series - Lamps, incandescent - Part 020: Lamp, code 311 - Product standard
• EN-2240-021 - Aerospace series - Lamps, incandescent - Part 021: Lamp, code 313 - Product standard
• EN-2240-022 - Aerospace series - Lamps, incandescent - Part 022: Lamp, code 315 - Product standard
• EN-2240-023 - Aerospace series - Lamps, incandescent - Part 023: Lamp, code 316 - Product standard
• EN-2240-024 - Aerospace series - Lamps, incandescent - Part 024: Lamp, code 327 - Product standard
• EN-2240-025 - Aerospace series - Lamps, incandescent - Part 025: Lamp, code 328 - Product standard
• EN-2240-026 - Aerospace series - Lamps, incandescent - Part 026: Lamp, code 330 - Product standard
• EN-2240-027 - Aerospace series - Lamps, incandescent - Part 027: Lamp, code 334 - Product standard
• EN-2240-028 - Aerospace series - Lamps, incandescent - Part 028: Lamp, code 337 - Product standard
• EN-2240-029 - Aerospace series - Lamps, incandescent - Part 029: Lamp, code 338 - Product standard
• EN-2240-030 - Aerospace series - Lamps, incandescent - Part 030: Lamp, code 345 - Product standard
• EN-2240-031 - Aerospace series - Lamps, incandescent - Part 031: Lamp, code 356 - Product standard
• EN-2240-032 - Aerospace series - Lamps, incandescent - Part 032: Lamp, code 376 - Product standard
• EN-2240-033 - Aerospace series - Lamps, incandescent - Part 033: Lamp, code 377 - Product standard
• EN-2240-034 - Aerospace series - Lamps, incandescent - Part 034: Lamp, code 382 - Product standard
• EN-2240-035 - Aerospace series - Lamps, incandescent - Part 035: Lamp, code 387 - Product standard
• EN-2240-036 - Aerospace series - Lamps, incandescent - Part 036: Lamp, code 388 - Product standard
• EN-2240-037 - Aerospace series - Lamps, incandescent - Part 037: Lamp, code 394 - Product standard
• EN-2240-038 - Aerospace series - Lamps, incandescent - Part 038: Lamp, code 401 - Product standard
• EN-2240-039 - Aerospace series - Lamps, incandescent - Part 039: Lamp, code 600 - Product standard
• EN-2240-040 - Aerospace series - Lamps, incandescent - Part 040: Lamp, code 680 - Product standard
• EN-2240-041 - Aerospace series - Lamps, incandescent - Part 041: Lamp, code 682 - Product standard
• EN-2240-042 - Aerospace series - Lamps, incandescent - Part 042: Lamp, code 683 - Product standard
• EN-2240-043 - Aerospace series - Lamps, incandescent - Part 043: Lamp, code 685 - Product standard
• EN-2240-044 - Aerospace series - Lamps, incandescent - Part 044: Lamp, code 713 - Product standard
• EN-2240-045 - Aerospace series - Lamps, incandescent - Part 045: Lamp, code 714 - Product standard
• EN-2240-046 - Aerospace series - Lamps, incandescent - Part 046: Lamp, code 715 - Product standard
• EN-2240-047 - Aerospace series - Lamps, incandescent - Part 047: Lamp, code 718 - Product standard
• EN-2240-048 - Aerospace series - Lamps, incandescent - Part 048: Lamp, code 718 NPC - Product standard
• EN-2240-049 - Aerospace series - Lamps, incandescent - Part 049: Lamp, code 757 - Product standard
• EN-2240-050 - Aerospace series - Lamps, incandescent - Part 050: Lamp, code 1064 - Product standard
• EN-2240-051 - Aerospace series - Lamps, incandescent - Part 051: Lamp, code 1163 - Product standard
• EN-2240-052 - Aerospace series - Lamps, incandescent - Part 052: Lamp, code 1222 - Product standard
• EN-2240-053 - Aerospace series - Lamps, incandescent - Part 053: Lamp, code 1308 - Product standard
• EN-2240-054 - Aerospace series - Lamps, incandescent - Part 054: Lamp, code 1317 - Product standard
• EN-2240-055 - Aerospace series - Lamps, incandescent - Part 055: Lamp, code 1495 - Product standard
• EN-2240-056 - Aerospace series - Lamps, incandescent - Part 056: Lamp, code 1506 - Product standard
• EN-2240-057 - Aerospace series - Lamps, incandescent - Part 057: Lamp, code 1512 - Product standard
• EN-2240-058 - Aerospace series - Lamps, incandescent - Part 058: Lamp, code 1524 - Product standard
• EN-2240-059 - Aerospace series - Lamps, incandescent - Part 059: Lamp, code 1591 - Product standard
• EN-2240-060 - Aerospace series - Lamps, incandescent - Part 060: Lamp, code 1619 - Product standard
• EN-2240-061 - Aerospace series - Lamps, incandescent - Part 061: Lamp, code 1683 - Product standard
• EN-2240-062 - Aerospace series - Lamps, incandescent - Part 062: Lamp, code 1810 - Product standard
• EN-2240-063 - Aerospace series - Lamps, incandescent - Part 063: Lamp, code 1815 - Product standard
• EN-2240-064 - Aerospace series - Lamps, incandescent - Part 064: Lamp, code 1819 - Product standard
• EN-2240-065 - Aerospace series - Lamps, incandescent - Part 065: Lamp, code 1820 - Product standard
• EN-2240-066 - Aerospace series - Lamps, incandescent - Part 066: Lamp, code 1829 - Product standard
• EN-2240-067 - Aerospace series - Lamps, incandescent - Part 067: Lamp, code 1843 - Product standard
• EN-2240-068 - Aerospace series - Lamps, incandescent - Part 068: Lamp, code 1864 - Product standard
• EN-2240-069 - Aerospace series - Lamps, incandescent - Part 069: Lamp, code 1978 - Product standard
• EN-2240-070 - Aerospace series - Lamps, incandescent - Part 070: Lamp, code 2232 - Product standard
• EN-2240-072 - Aerospace series - Lamps, incandescent - Part 072: Lamp, code 3912 - Product standard
• EN-2240-073 - Aerospace series - Lamps, incandescent - Part 073: Lamp, code 4174 - Product standard
• EN-2240-074 - Aerospace series - Lamps, incandescent - Part 074: Lamp, code 5086 - Product standard
• EN-2240-075 - Aerospace series - Lamps, incandescent - Part 075: Lamp, code 5448 - Product standard
• EN-2240-076 - Aerospace series - Lamps, incandescent - Part 076: Lamp, code 5678 - Product standard
• EN-2240-077 - Aerospace series - Lamps, incandescent - Part 077: Lamp, code 6832 - Product standard
• EN-2240-078 - Aerospace series - Lamps, incandescent - Part 078: Lamp, code 6838 - Product standard
• EN-2240-079 - Aerospace series - Lamps, incandescent - Part 079: Lamp, code 6839 - Product standard
• EN-2240-080 - Aerospace series - Lamps, incandescent - Part 080: Lamp, code 7007-704 - Product standard
• EN-2240-081 - Aerospace series - Lamps, incandescent - Part 081: Lamp, code 7070 - Product standard
• EN-2240-082 - Aerospace series - Lamps, incandescent - Part 082: Lamp, code 7079 - Product standard
• EN-2240-083 - Aerospace series - Lamps, incandescent - Part 083: Lamp, code 7152 - Product standard
• EN-2240-084 - Aerospace series - Lamps, incandescent - Part 084: Lamp, code 7153 - Product standard
• EN-2240-085 - Aerospace series - Lamps, incandescent - Part 085: Lamp, code 7265 - Product standard
• EN-2240-086 - Aerospace series - Lamps, incandescent - Part 086: Lamp, code 7333 - Product standard
• EN-2240-087 - Aerospace series - Lamps, incandescent - Part 087: Lamp, code 7341 - Product standard
• EN-2240-088 - Aerospace series - Lamps, incandescent - Part 088: Lamp, code A7512-12 - Product standard
• EN-2240-089 - Aerospace series - Lamps, incandescent - Part 089: Lamp, code A7512-24 - Product standard
• EN-2240-090 - Aerospace series - Lamps, incandescent - Part 090: Lamp, code 7683 - Product standard
• EN-2240-091 - Aerospace series - Lamps, incandescent - Part 091: Lamp, code 7714 - Product standard
• EN-2240-092 - Aerospace series - Lamps, incandescent - Part 092: Lamp, code 7715 - Product standard
• EN-2240-093 - Aerospace series - Lamps, incandescent - Part 093: Lamp, code 7839 - Product standard
• EN-2240-094 - Aerospace series - Lamps, incandescent - Part 094: Lamp, code 8022 - Product standard
• EN-2240-095 - Aerospace series - Lamps, incandescent - Part 095: Lamp, code 8552 - Product standard
• EN-2240-096 - Aerospace series - Lamps, incandescent - Part 096: Lamp, code 72301-6 - Product standard
• EN-2240-097 - Aerospace series - Lamps, incandescent - Part 097: Lamp, code 72601-12 - Product standard
• EN-2240-098 - Aerospace series - Lamps, incandescent - Part 098: Lamp, code 416650 - Product standard
• EN-2240-099 - Aerospace series - Lamps, incandescent - Part 099: Lamp, code 416700 - Product standard
• EN-2240-100 - Aerospace series - Lamps, incandescent - Part 100: Lamp, code 2078 - Product standard
• EN-2240-101 - Aerospace series - Lamps, incandescent - Part 101: Lamp, code 404-02 - Product standard
• EN-2241 - Aerospace Series - Lamp Caps - Dimensions
• EN-2242 - Aerospace series - Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
• EN-2266-005 - Aerospace Series, Cables, Electrical, for General Purpose, Operating Temperatures Betw
• EN-2266-008 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 Degrees C and 200 Degrees C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard
• EN-2267-002 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 Degrees C and 260 Degrees C - Part 002: General
• EN-2267-005 - Aerospace Series, Cables, Electrical, for General Purpose, Operating Temperatures -55
• EN-2267-007 - Aerospace Series, Cables, Electrical, for General Purpose, Operating Temperatures Betw
• EN-2267-008 - Aerospace Series, Cables, Electrical, for General Purpose, Operating Temperatures Betw
• EN-2267-009 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 DegC and 260 DegC - Part 009: DRA family, single and multicore assembly - Product standard
• EN-2267-010 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 DegC and 260 DegC - Part 010: DR family, single UV laser printable - Product standard
• EN-2267-011 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 Degrees C and 260 Degrees C - Part 011: DZA family, single and multicore assembly for use in low pressure atmosphere - Product standard
• EN-2267-012 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 Degrees C and 260 Degrees C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard
• EN-2283 - Aerospace Series - Testing of Aircraft Wiring
• EN-2346-002 - Part 002: General, Aerospace Series - Cable, Electrical, Fire Resistant - Operating Te
• EN-2346-003 - Part 003: Dl Family, Single Core - Product Standard, Aerospace Series - Cable, Electri
• EN-2346-004 - Part 004: DN Family, Single Uv Laser Printable & Multicore Assembly - Light Weight - P
• EN-2346-005 - Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 ¦C and 260 ¦C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard
• EN-2349-201 - Part 201: Visual Inspection, Aerospace Series - Requirements & Test Procedures for Rel
• EN-2349-202 - Part 202: Examination of Dimensions & Mass, Aerospace Series - Requirements & Test Pro
• EN-2349-301 - Part 301: Pick-Up & Drop-Out Voltage, Aerospace Series - Requirements & Test Procedure
• EN-2349-302 - Part 302: Insulation Resistance; Aerospace Series - Requirements & Test Procedures For
• EN-2349-303 - Part 303: Dielectric Strength; Aerospace Series - Requirements & Test Procedures for R
• EN-2349-304 - Part 304: Operate & Release Time; Aerospace Series - Requirements & Test Procedures Fo
• EN-2349-305 - Part 305: Bounce Time; Aerospace Series - Requirements & Test Procedures for Relays &
• EN-2349-306 - Part 306: Overload D.C. & a.C.; Aerospace Series - Requirements & Test Procedures For
• EN-2349-307 - Part 307: Contact Voltage Drop; Aerospace Series - Requirements & Test Procedures For
• EN-2349-308 - Part 308: Coil Current; Aerospace Series - Requirements & Test Procedures for Relays &
• EN-2349-309 - Part 309: Exported Spikes; Aerospace Series - Requirements & Test Procedures for Relay
• EN-2349-310 - Part 310: Rupture; Aerospace Series - Requirements & Test Procedures for Relays & Cont
• EN-2349-312 - Part 312: Electrical Service Life - Mixed Load; Aerospace Series - Requirements & Test
• EN-2349-316 - Part 316: Mechanical Life (Endurance at Reduced Load); Aerospace Series - Requirements
• EN-2349-317 - Part 317: Service Life of Coil Switching Device; Aerospace Series - Requirements & Tes
• EN-2349-318 - Part 318: Pick-Up Voltage at High Temperature & Drop-Out Voltage at Low Temperature; A
• EN-2349-319 - Part 319: Miss Test, Aerospace Series - Requirements & Test Procedures for Relays & C
• EN-2349-402 - Part 402: Corrosion, Salt Spray; Aerospace Series - Requirements & Test Prodedures For
• EN-2349-407 - Part 407: Cold/Low Pressure & Moist Heat; Aerospace Series - Requirements & Test Proce
• EN-2349-410 - Part 410: Mould, Aerospace Series - Requirements & Test Procedures for Relays & Contac
• EN-2349-411 - Part 411: Temperature Change, Aerospace Series - Requirements & Test Procedures for Re
• EN-2349-412 - Aerospace Series, Requirements & Test Procedures for Relays & Contactors, Seal
• EN-2349-413 - Aerospace Series, Requirements & Test Procedures for Relays Contactors, Vibration, Si
• EN-2349-414 - Part 414: Mechanical Shock, Aerospace Series - Requirements & Test Procedures for Rel
• EN-2349-415 - Part 415: Acceleration, Aerospace Series - Requirements & Test Procedures for Relays &
• EN-2349-601 - Part 601: Compass Safety Distance, Aerospace Series - Requirements & Test Procedures F
• EN-2570 - Nickel-Cadmium Batteries, Technical Specification
• EN-2591 - Elements of Electrical & Optical Connection, Test Methods, General
• EN-2591-100 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General
• EN-2591-210 - Elements of Electrical & Optical Connection, Test Methods, Electrical Overload
• EN-2591-2124 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse
• EN-2591-214 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse
• EN-2591-221 - Part 221: Voltage Standing Wave Ratio (Vswr), Aerospace Series - Elements of Electrica
• EN-2591-222 - Part 222: Insertion Loss (I.l.), Aerospace Series - Elements of Electrical & Optical C
• EN-2591-223 - Part 223: Measurement of Characteristic Impedance of a Coaxial Connector or Contact, A
• EN-2591-224 - Part 224: Rf Leakage, Aerospace Series - Elements of Electrical & Optical Connection -
• EN-2591-225 - Part 225: Rf High Potential Withstanding Voltage, Aerospace Series - Elements of Elec
• EN-2591-226 - Part 226: Corona Level, Aerospace Level - Elements of Electrical & Optical Connection
• EN-2591-227 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 227: Partial discharges test
• EN-2591-306 - Elements of Electrical & Optical Connection, Test Methods, Mould, Mould Growth
• EN-2591-307 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist
• EN-2591-308 - Elements of Electrical & Optical Connection, Test Methods, Sand & Dust
• EN-2591-310 - Elements of Electrical & Optical Connection, Test Methods, Cold
• EN-2591-315 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance
• EN-2591-317 - Elements of Electrical & Optical Connection, Test Methods, Flammability
• EN-2591-318 - Elements of Electrical & Optical Connection, Test Methods, Fire-Resistance
• EN-2591-322 - Elements of Electrical & Optical Connection, Test Methods, Hermeticity
• EN-2591-323 - Elements of Electrical & Optical Connection, Test Methods, Thermal Shock
• EN-2591-324 - Elements of Electrical & Optical Connection, Test Methods, Interfacial Sealing
• EN-2591-326 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 326: Fire immersion test
• EN-2591-402 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock
• EN-2591-403 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
• EN-2591-420 - Part 420: Mechanical Strength of Rear Accessories, Aerospace Series - Elements of Elec
• EN-2591-6317 - Elements of Electrical & Optical Connection, Test Methods, Optical Elements, Flammabil
• EN-2593-001 - Aerospace series - Bases for 10 A electromagnetic plug-in relays, two and four poles double thrown - Part 001: Technical specification
• EN-2665-001 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification
• EN-2665-004 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 004: UNC thread terminals - Product standard
• EN-2713-002 - Part 002: Screened & Jacketed - General; Aerospace Series - Cables, Electrical, Singl
• EN-2713-003 - Part 003: Screened (Spiral) & Jacketed, Ink Jet Printable - Product Standard, Aerospa
• EN-2713-004 - Part 004: Screened (Braided) & Jacketed, Ink Jet Printable - Product Standard, Aerospa
• EN-2713-005 - Part 005: Screened (Spiral) & Jacketed, Co2-Laser Printable - Product Standard, Aeros
• EN-2713-006 - Part 006: Screened (Braided) & Jacketed, Co2-Laser Printable - Product Standard, Aeros
• EN-2713-007 - Part 007: Screened (Spiral) & Jacketed, Uv Laser Printable - Product Standard, Aerospa
• EN-2713-008 - Part 008: Screened (Braided) & Jacketed, Uv Laser Printable - Product Standard, Aeros
• EN-2713-009 - Part 009: Screened (Spiral) & Jacketed, Yag X3 Laser Printable - Product Standard, Aer
• EN-2713-010 - Part 010: Screened (Braided) & Jacketed, Yag X3 Laser Printable - Product Standard, Ae
• EN-2713-011 - Aerospace Series - Cables, Electrical, Single & Multicore for General Purpose - Operat
• EN-2713-012 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 Degrees C and 200 Degrees C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
• EN-2714-002 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 Degrees C and 260 Degrees C - Part 002: Screened and jacketed - General
• EN-2714-004 - Aerospace Series - Cables, Electrical, Single & Multicore for General Purpose - Operat
• EN-2714-005 - Part 005: Screened (Spiral) & Jacketed, Co2 Laser Printable - Product Standard, Aeros
• EN-2714-006 - Part 006: Screened (Braided) & Jacketed, Co2 Laser Printable - Product Standard; Aeros
• EN-2714-008 - Part 008: Screened (Braided) & Jacketed, Uv Laser Printable - Product Standard; Aeros
• EN-2714-009 - Part 009: Screened (Spiral) & Jacketed, Yag X3 Laser Printable - Product Standard, Aer
• EN-2714-010 - Part 010: Screened 9Braided) & Jacketed, Yag X3 Laser Printable - Product Standard; Ae
• EN-2714-013 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 DegC and 260 DegC - Part 013: DR family, screened (spiral) and jacketed, UV laser printable - Product standard
• EN-2714-014 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 Degrees C and 260 Degrees C - Part 014: DR family, 4 to 11 cores, taped, screened (braided) and jacketed, UV laser printable - Product standard
• EN-2756 - Aerospace Series - Lamps, Incandescent - Test Methods
• EN-2794-001 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification
• EN-2794-004 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals - Product standard
• EN-2854-002 - Part 002: General, Aerospace Series - Cables, Electrical, for General Purpose - Cross
• EN-2854-003 - Aerospace Series, Cables, Electrical for General Purpose, Cross Sections Equal To & Gr
• EN-2995-001 - Part 001: Technical Specification; Aerospace Series - Circuit Breakers, Single-Pole, T
• EN-2995-004 - Part 004: With Signal Contact - Product Standard; Aerospace Series - Circuit Breakers
• EN-2995-005 - Part 005: With Polarized Signal Contact - Product Standard; Aerospace Series - Circui
• EN-2996-001 - Part 001: Technical Specification, Aerospace Series - Circuit Breakers, Three-Pole, Te
• EN-2996-004 - Part 004: With Signal Contact - Product Standard, Aerospace Series - Circuit Breakers
• EN-2997-001 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 DegC to 175 DegC continuous, 200 DegC continuous, 260 DegC peak - Part 001: Technical specification
• EN-2997-002 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 Degrees C to 175 Degrees C continuous, 200 Degrees C continuous, 260 Degrees C peak - Part 002: Specification of performance and contact arrangements
• EN-2997-003 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 Degrees C to 175 Degrees C continuous, 200 Degrees C continuous, 260 Degrees C peak - Part 003: Square flange receptacle - Product standard
• EN-2997-004 - Part 004: Jam-Nut Mounted Receptacle - Product Standard, Aerospace Series - Connectors
• EN-2997-005 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 Degrees C to 175 Degrees C continuous, 200 Degrees C continuous, 260 Degrees C peak - Part 005: Hermetic square flange receptacle - Product standard
• EN-2997-006 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 ¦C to 175 ¦C continuous, 200 ¦C continuous, 260 ¦C peak - Part 006: Hermetic jam-nut mounted receptacle - Produ
• EN-2997-007 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 Degrees C to 175 Degrees C continuous, 200 Degrees C continuous, 260 Degrees C peak - Part 007: Hermetic receptacle with round flange attached by welding or brazing - Product standard
• EN-2997-008 - Part 008: Plug - Product Standard, Aerospace Series - Connectors, Electrical, Circular
• EN-2997-009 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 Degrees C to 175 Degrees C continuous, 200 Degrees C continuous, 260 Degrees C peak - Part 009: Protective cover for receptacle - Product standard
• EN-2997-010 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 Degrees C to 175 Degrees C continuous, 200 Degrees C continuous, 260 Degrees C peak - Part 010: Protective cover for plug - Product standard
• EN-2997-011 - Part 011: Dummy Receptacle - Product Standard, Aerospace Series - Connectors, Electric
• EN-2997-012 - Part 012: Jam-Nut for Jam-Nut Receptacles - Prodcuct Standard, Aerospace Series - Conn
• EN-2997-013 - Part 013: O-Ring Seal for Jam-Nut Receptacles - Product Standard, Aerospace Series - C
• EN-2997-014 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 Degrees C to 175 Degrees C continuous, 200 Degrees C continuous, 260 Degrees C peak - Part 014: Square flange receptacle with integrated accessory - Product standard
• EN-2997-016 - Part 016: Plug With Integrated Accessory - Product Standard, Aerospace Series - Connec
• EN-3155-001 - Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification
• EN-3155-002 - Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts
• EN-3155-003 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3155-004 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3155-005 - Part 005: Contacts, Electrical, Female, Type a, Crimp, Class T - Product Standard, Aer
• EN-3155-008 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3155-009 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3155-012 - Part 012: Contacts, Electrical, Triaxial, Size 8, Male, Type D, Solder, Class R - Prod
• EN-3155-013 - Part 013: Contacts, Electrical, Triaxial, Size 8, Female, Type D, Solder, Class R - Pr
• EN-3155-014 - Part 014: Contacts, Electrical, Male, Type a, Crimp, Class - Product Standard, Aerospa
• EN-3155-015 - Part 015: Contacts, Electrical, Female, Type a, Crimp, Class S - Product Standard, Aer
• EN-3155-016 - Part 016: Contacts, Electrical, Male, Type a, Crimp, Class R - Product Standard, Aeros
• EN-3155-017 - Part 017: Contacts, Electrical, Relay Base, Female, Type a, Crimp, Class P - Product
• EN-3155-018 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3155-019 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3155-022 - Part 022: Contacts, Electrical Rectangular, Male, Type a, Crimp, Class R - Product Sta
• EN-3155-023 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3155-024 - Part 024: Contacts, Electrical, Triaxial, Size 8, Male, Type D, Crimp, Class S - Produ
• EN-3155-025 - Part 025: Contacts, Electrical, Triaxial, Size 8, Female, Type D, Crimp, Class S - Pro
• EN-3155-026 - Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product standard
• EN-3155-027 - Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product standard
• EN-3155-028 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3155-029 - Part 029: Contacts, Electrical, Coaxial, Shielded, Size 16, Female, Type D, Crimp, Cl
• EN-3155-030 - Part 030: Contacts, Electrical, Coaxial, Shielded, Size 12, Male, Type D, Crimp, Clas
• EN-3155-031 - Part 031: Contacts, Electrical, Coaxial, Shielded, Size 12, Female, Type D, Crimp, Cl
• EN-3155-032 - Part 032: Contacts, Electrical, Coaxial, 50 Ohms, Size 5, Male, Type D, Crimp, Class R
• EN-3155-033 - Part 033: Contacts, Electrical, Coaxial, 50 Ohms, Size 5, Female, Type D, Crimp, Class
• EN-3155-034 - Part 034: Contacts, Electrical, Triaxial, Size 08, Male, Type D, Crimip, Class R - Pro
• EN-3155-035 - Aerospace series - Electrical contacts used in elements of connection - Part 035: Contacts, electrical, triaxial, size 08, female, type D, crimp, class R - Product standard
• EN-3155-039 - Part 039: Contacts, Electrical, Coaxial, Size 16, Female, Type D, Solder, Class R - Pr
• EN-3155-040 - Part 040: Contacts, Electrical, Coaxial, Size 12, Male, Type D, Solder, Class R - Prod
• EN-3155-041 - Part 041: Contacts, Electrical, Coaxial, Size 12, Female, Type D, Solder, Class R - Pr
• EN-3155-042 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3155-043 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3155-045 - Part 045: Contacts, Electrical, Female, Type a, Double Crimping, Class T - Product Sta
• EN-3155-047 - Part 047: Contacts, Electrical, Female, Type a, Double Crimping, Class S - Product Sta
• EN-3155-052 - Part 052: Contacts, Electrical, Male 052, Type a, Crimp, Class S - Product Standard, A
• EN-3155-053 - Part 053: Contacts, Electrical, Female 053, Type a, Crimp, Class S - Product Standard,
• EN-3155-054 - Part 054: Contacts, Electrical, Male, Thermocouple Niai, Type C, Crimp, Class T - Prod
• EN-3155-055 - Part 055: Contacts, Electrical, Female, Thermocouple Niai, Type C, Crimp, Class T - Pr
• EN-3155-056 - Part 056: Contacts, Electrical, Male, Thermocouple Nicr, Type C, Crimp, Class T - Prod
• EN-3155-057 - Part 057: Contacts, Electrical, Female, Thermocouple Nicr, Type C, Crimp, Class T - Pr
• EN-3155-058 - Part 058: Contacts, Electrical, Coaxial, Size 16, Male, Type D, Solder, Class R - Prod
• EN-3155-059 - Part 059: Contacts, Electrical, Coaxial, Size 16, Female, Type D, Solder, Class R - Pr
• EN-3155-060 - Part 060: Contacts, Electrical, Coaxial, Size 12, Male, Type D, Solder, Class R - Prod
• EN-3155-061 - Part 061: Contacts, Electrical, Coaxial, Size 12, Female, Type D, Solder, Class R - Pr
• EN-3155-063 - Part 063: Contacts, Electrical, Coaxial, 50 Ohms, Size 1, Male, Type D, Solder, Class
• EN-3155-064 - Part 064: Contacts, Electrical, Coaxial, 50 Ohms, Size 1, Female, Type D, Solder, Clas
• EN-3155-065 - Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard
• EN-3155-066 - Aerospace series - Electrical contacts used in elements of connection - Part 066: Contacts, electrical, female, type A, crimp, class S, size 8 - Product standard
• EN-3155-067 - Part 067: Contacts, Electrical, Coaxial, Size 08, Male, Type D, Solder, Class R - Prod
• EN-3155-068 - Part 068: Contacts, Electrical, Coaxial, Size 08, Female, Type D, Solder, Class R - Pr
• EN-3155-069 - Part 069: Contacts, Electrical, Coaxial, Size 16, Female, Type D, Solder, Class P - Pr
• EN-3155-070 - Aerospace series - Electrical contacts used in elements of connection - Part 070: Contacts, electrical, male, type A, crimp, class S - Product standard
• EN-3155-071 - Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard
• EN-3155-074 - Part 074: Contacts, Electrical, Quadrax, Size 8, Male, Typee, Crimp, Class R - Produc
• EN-3155-075 - Part 075: Contacts, Electrical, Quadrax, Size 8, Female, Type E, Crimp, Class R - Prod
• EN-3155-076 - Aerospace series - Electrical contacts used in elements of connection - Part 076: Contacts, electrical, male, type A, crimp, class R - Product standard
• EN-3155-077 - Aerospace series - Electrical contacts used in elements of connection - Part 077: Contacts, electrical, female, type A, crimp, class R - Product standard
• EN-3155-078 - Aerospace series - Electrical contacts used in elements of connection - Part 078: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class S - Product standard
• EN-3155-079 - Aerospace series - Electrical contacts used in elements of connection - Part 079: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S - Product standard
• EN-3155-080 - Aerospace series - Electrical contacts used in elements of connection - Part 080: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T - Product standard
• EN-3155-081 - Aerospace series - Electrical contacts used in elements of connection - Part 081: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class T - Product standard
• EN-3155-082 - Aerospace series - Electrical contacts used in elements of connection - Part 082: Contacts, electrical, female, type A, crimp, class S - Product standard
• EN-3155-083 - Aerospace series - Electrical contacts used in elements of connection - Part 083: Contact, electrical, female, type A, crimp, class S, size 8 - Product standard
• EN-3155-44 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3155-46 - Aerospace Series, Electrical Contacts Used in Elements of Connection, Contacts, Electr
• EN-3218-001 - Aerospace Series, Connectors, Rectangular, With Metallic Shells & Screw-Locking, Techn
• EN-3218-005 - Aerospace Series, Connectors, Rectangular, With Metallic Shells & Screw-Locking, Plug
• EN-3218-006 - Aerospace Series, Connectors, Rectangular, With Metallic Shells & Screw-Locking, Recep
• EN-3218-007 - Aerospace Series, Connectors, Rectangular, With Metallic Shells & Screw-Locking, Plug
• EN-3218-008 - Aerospace Series, Connectors, Rectangular, With Metallic Shells & Screw-Locking, Recep
• EN-3218-009 - Aerospace Series, Connectors, Rectangular, With Metallic Shells & Screw-Locking, Prote
• EN-3218-010 - Aerospace Series, Connectors, Rectangular, With Metallic Shells & Screw-Locking, Prote
• EN-3218-011 - Aerospace Series, Connectors, Rectangular, With Metallic Shells & Screw-Locking, Tool,
• EN-3372-001 - Part 001: Technical Specification, Aerospace Series - Connectors, Electrical, Circular
• EN-3372-002 - Part 002: Specification of Performance & Contact Arrangements, Aerospace Series - Conn
• EN-3372-003 - Part 003: Square Flange Receptacle - Product Standard, Aerospace Series - Connectors,
• EN-3372-005 - Part 005: Receptacle, Hermetic, Round Flange, Solder Mounting - Product Standard, Aero
• EN-3372-006 - Part 006: Protective Cover for Receptacle - Product Standard, Aerospace Series - Conne
• EN-3372-007 - Part 007: Protective Cover for Plug - Product Standard, Aerospace Series - Connectors,
• EN-3372-008 - Part 008: Free Plug With Grounding Spring - Product Standard, Aerospace Series - Conne
• EN-3372-009 - Part 009: Receptacle, Jam Nut Mounting - Product Standard, Aerospace Series - Connecto
• EN-3372-011 - Part 011: Dummy Receptacle - Product Standard, Aerospace Series - Connectors, Electric
• EN-3373-001 - Aerospace Series, Terminal Lugs & In-Line Splices for Crimping on Electric Conductors,
• EN-3373-002 - Part 002: General & List of Product Standard, Aerospace Series - Terminal Lugs & In-Li
• EN-3373-007 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard
• EN-3373-008 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 Degrees C - Product standard
• EN-3373-010 - Part 010: Terminal Lugs, Ring Shaped, Tin Plated, for Crimping on Copper Conductors, T
• EN-3373-011 - Part 011: Terminal Lugs, Ring Shaped, Nickel Plated, for Crimping on Copper Conductors
• EN-3373-014 - Aerospace Series, Terminal Lugs & In-Line Splices for Crimping on Electric Conductors,
• EN-3375-001 - Part 001: Technical Specification; Aerospace Series - Cable, Electrical, for Digital D
• EN-3375-002 - Aerospace series - Cable, electrical, for digital data transmission - Part 002: General
• EN-3375-003 - Part 003: Single Braid - 77 Ohms - Type kg - Product Standard, Aerospace Series - Cabl
• EN-3375-004 - Part 004: Double Braid - 77 Ohms - Type Wj - Product Standard, Aerospace Series - Cabl
• EN-3375-005 - Part 005: Double-Braid + Metallic Layer - 77 Ohms - Type Wv - Product Standard, Aeros
• EN-3375-006 - Part 006: Single Braid - 78 Ohms - Type Xm - Product Standard, Aerospace Series - Cabl
• EN-3375-007 - Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard
• EN-3375-008 - Part 008: Single Braid - Star Quad 100 Ohms - Type Kd - Product Standard, Aerospace Se
• EN-3375-009 - Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard
• EN-3375-011 - Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard
• EN-3475-100 - Part 100: General, Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods
• EN-3475-203 - Aerospace Series, Cables, Electrical, Aircraft Use, Test Methods, Dimensions
• EN-3475-302 - Part 302: Voltage Proof Test, Aerospace Series - Cable, Electrical, Aircraft Use - Tes
• EN-3475-307 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
• EN-3475-407 - Part 407: Flammability, Aerospace Series - Calbes, Electrical, Aircraft Use - Test Met
• EN-3475-411 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
• EN-3475-416 - Part 416: Thermal Stability, Aerospace Series - Cables, Electrical, Aircraft Use - Tes
• EN-3475-417 - Part 417: Fire Resistance of Cables Confined Inside a Harness, Aerospace Series - Cabl
• EN-3475-418 - Part 418: Thermal Endurance for Conductors, Aerospace Series - Cables, Electrical, Air
• EN-3475-501 - Part 501: Dynamic Cut-Through, Aerospace Series - Cables, Electrical, Aircraft Use - T
• EN-3475-505 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
• EN-3475-506 - Part 506: Plating Continuity, Aerospace Series - Cables, Electrical, Aircraft Use - Te
• EN-3475-507 - Part 507: Adherence of Plating, Aerospace Series - Cables, Electrical, Aircraft Use -
• EN-3475-508 - Part 508: Plating Thickness, Aerospace Series - Cables, Electrical, Aircraft Use - Tes
• EN-3475-512 - Aerospace Series, Cables, Electrical, Aircraft Use, Test Methods, Flexure Endurance
• EN-3475-514 - Part 514: Porosity of Copper Cladding on Aluminium Strands, Aerospace Series - Cables
• EN-3475-515 - Part 515: Crush Resistance, Aerospace Series - Cable, Electrical, Aircraft Use - Test
• EN-3475-601 - Part 601: Smoke Density, Aerospace Series - Cables, Electrical, Aircraft Use - Test Me
• EN-3475-602 - Part 602: Toxicity, Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods
• EN-3475-603 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking
• EN-3475-604 - Part 604: Resistance To Dry Arc Propagation, Aerospace Series - Cables, Electrical, Ai
• EN-3475-605 - Part 605: Wet Short Circuit Test, Aerospace Series - Cables, Electrical, Aircraft Use
• EN-3475-701 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor
• EN-3475-702 - Aerospace Series, Cables, Electrical, Aircraft Use, Test Methods, Screen Pushback CAPA
• EN-3475-704 - Part 704: Flexibility, Aerospace Series - Cables, Electrical, Aircraft Use - Test Meth
• EN-3475-802 - Part 802: Capacitance Unbalance, Aerospace Series - Cables, Electrical, Aircraft Use
• EN-3475-809 - Part 809: Resistance, Aerospace Series - Cables, Electrical, Aircraft Use - Test Metho
• EN-3475-810 - Part 810: Structural Return Loss, Aerospace Series - Cables, Electrical, Aircraft Use
• EN-3475-811 - Part 811: Unbalance Attenuation, Aerospace Series - Cables, Electrical, Aircraft Use
• EN-3475-812 - Part 812: Return Loss (Vswr), Aerospace Series - Cables, Electrical, Aircraft Use - Te
• EN-3545-001 - Part 001: Technical Specification, Aerospace Series - Connectors, Electrical, Rectangu
• EN-3545-002 - Aerospace Series - Connectors, Electrical, Rectangular, With Sealed & Non-Sealed Rear,
• EN-3545-005 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 Degrees C to 175 Degrees C - Part 005: Female coding and attachment System for mounting on free housing (plug) - Product standard
• EN-3545-006 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 Degrees C to 175 Degrees C - Part 006: Male coding and attachment System for mounting on fixed housing (receptacle) - Product standard
• EN-3545-007 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 Degrees C to 175 Degrees C - Part 007: Cable clamp - Product standard
• EN-3545-008 - Part 008: Tools for Assembly/Removal of Coding & Attachment System - Product Standard
• EN-3545-009 - Part 009: Protective Cover for Plug & Receptacle - Product Standard, Aerospace Series
• EN-3645-001 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 Degrees C or 200 Degrees C continuous - Part 001: Technical specification
• EN-3645-002 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 Degrees C or 200 Degrees C continuous - Part 002: Specification of performance and contact arrangements
• EN-3645-003 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 Degrees C or 200 Degrees C continuous - Part 003: Receptacle square flange mounting - Product standard
• EN-3645-004 - Part 004: Receptacle, Hermetic, Square Flange Mounting - Product Standard, Aerospace S
• EN-3645-005 - Part 005: Receptacle, Hermetic, Round Flange, Brasage Mounting - Product Standard, Aeo
• EN-3645-006 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 Degrees C or 200 Degrees C continuous - Part 006: Protective cover for receptacle - Product standard
• EN-3645-007 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 Degrees C or 200 Degrees C continuous - Part 007: Protective cover for plug - Product standard
• EN-3645-008 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 Degrees C or 200 Degrees C continuous - Part 008: Non release plug with grounding ring - Product standard
• EN-3645-009 - Part 009: Receptacle, Round Flange, Jam Nut Mounting - Product Standard, Aerospace Ser
• EN-3645-010 - Part 010: Receptacle, Hermetic, Round Flange, Jam Nut Mounting - Product Standard, Aer
• EN-3645-011 - Part 011: Lanyard Release Plug With Grounding Fingers - Type 1 - Product Standard, Aer
• EN-3645-012 - Part 012: Lanyard Release Plug With Grounding Fingers - Type 2 - Product Standard, Aer
• EN-3645-013 - Part 013: Dummy Receptacle - Product Standard, Aerospace Series - Connectors, Electric
• EN-3646-001 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 Degrees C or 200 Degrees C continuous - Part 001: Technical specification
• EN-3646-002 - Aerospace Series, Connectors, Electrical, Circular, Bayonet Coupling, Operating Tempe
• EN-3646-003 - Part 003: Receptacle, Square Flange Mounting - Product Standard; Aerospace Series - Co
• EN-3646-004 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 Degrees C or 200 Degrees C continuous - Part 004: Receptacle, jam-nut mounting - Product standard
• EN-3646-005 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 Degrees C or 200 Degrees C continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard
• EN-3646-006 - Part 006: Receptacle, Hermetic, Jam-Nut Mounting - Product Standard; Aerospace Series
• EN-3646-007 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 Degrees C or 200 Degrees C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard
• EN-3646-008 - Part 008: Plug - Product Standard; Aerospace Series - Connectors, Electrical, Circular
• EN-3646-009 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 Degrees C or 200 Degrees C continuous - Part 009: Protective cover for receptacle - Product standard
• EN-3646-010 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 Degrees C or 200 Degrees C continuous - Part 010: Protective cover for plug - Product standard
• EN-3646-011 - Part 011: Dummy Receptacle - Product Standard; Aerospace Series - Connectors, Electric
• EN-3660-001 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
• EN-3660-002 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 002: Index of product standards
• EN-3660-003 - Part 003: Grommet Nut, Style a for En-2997 & En-4067 - Product Standard, Aerospace Ser
• EN-3660-004 - Part 004: Cable Outlet, Style a, Straight, Unsealed With Clamp Strain Relief for En-29
• EN-3660-005 - Part 005: Cable Outlet, Style a, 90 Degrees, Unsealed With Clamp Strain Relief for En-
• EN-3660-006 - Part 006: Cable Outlet, Self-Locking, Style C, Straight, Shielded (Cone Grounding), Un
• EN-3660-007 - Part 007: Cable Outlet, Self-Locking, Style C, 90 Degrees, Shielded (Cone Grounding),
• EN-3660-008 - Part 008: Cable Outlet, Self-Locking, Style C, 45 Degrees, Shielded (Cone Grounding),
• EN-3660-009 - Part 009: Cable Outlet, Style J, Straight, Sealed, for Heat Shrinkable Boot - Product
• EN-3660-010 - Part 010: Cable Outlet, Style K, Straight, Shielded, Sealed, for Heat Shrinkable Boot
• EN-3660-011 - Part 011: Cable Outlet, Style K, 90 Degrees, Shielded, Sealed, for Heat Shrinkable Boo
• EN-3660-012 - Part 012: Grommet Nut, Style a for En-3372 - Product Standard, Aerospace Series - Cabl
• EN-3660-013 - Part 013: Cable Outlet, Style a, Straight, Unsealed, With Cable Tie Strain Relief - Pr
• EN-3660-014 - Part 014: Cable Outlet, Style a, 90 Degrees, Unsealed, With Cable Tie Strain Relief -
• EN-3660-015 - Part 015: Cable Outlet, Style a, 45 Degrees, Unsealed, With Cable Tie Strain Relief -
• EN-3660-016 - Part 016: Grommet Nut, Style a, Self-Locking & Non-Self-Locking for En-3645 - Product
• EN-3660-017 - Part 017: Cable Outlet, Style a, Straight, Unsealed, With Cable Tie Strain Relief - Pr
• EN-3660-018 - Part 018: Cable Outlet, Style a, 90 Degrees, Unsealed, With Cable Tie Strain Relief -
• EN-3660-019 - Part 019: Cable Outlet, Style a, 45 Degrees, Unsealed, With Cable Tie Strain Relief -
• EN-3660-020 - Part 020: Cable Outlet, Style a, Straight, Unsealed, Self-Locking With Clamp Strain Re
• EN-3660-021 - Part 021: Cable Outlet, Stylea, 90 Degrees, Unsealed, Self-Locking With Clamp Strain F
• EN-3660-022 - Part 022: Cable Outlet, Style a, Straight, Composite, Unsealed, With Cable Tie Strain
• EN-3660-023 - Part 023: Cable Outlet, Style a, 90, Composite, Unsealed, With Cable Tie Strain Relief
• EN-3660-024 - Part 024: Grommet Nut, Style a, Composite - Product Standard, Aerospace Series - Cable
• EN-3660-025 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard
• EN-3660-026 - Part 026: Cable Outlet, Style a, 90 Degrees, Unsealed, With Cable Tie Strain Relief E
• EN-3660-027 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 027: Cable outlet, style A, 45 Degrees , unsealed, with cable tie strain relief for EN 3646 - Product standard
• EN-3660-031 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 031: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard
• EN-3660-032 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 032: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard
• EN-3660-034 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 034: Memory metal rings, style Z, for the attachment of screens - Product standard
• EN-3660-035 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 035: Cable outlet, style K, 90 Deg, for heat shrinkable boot, shielded, sealed - Product standard
• EN-3660-036 - Part 036: Spacer Pad for Cable Outlet, Style Z - Product Standard; Aerospace Series -
• EN-3660-037 - Part 037: Bushing Strip, Elastomer, for Cable Outlet, Style Z - Product Standard, Aer
• EN-3660-038 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 038: Manual installation tool, style Z, for installation of stainless steel shield termination band EN 3660-033, to cable outlet accessories - Product standard
• EN-3660-062 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 062: Cable outlet, style K, 90 Degrees , for heat shrinkable boot, shielded, sealed, self-locking for EN 3645 - Product standard
• EN-3660-063 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645 - Product standard
• EN-3660-064 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 - Product standard
• EN-3660-065 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 065 : Cable outlet, style K, 90 Degrees , for heat shrinkable boot, shielded, sealed, self locking - Product standard
• EN-3660-066 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 066: Cable outlet, style K, 90 Deg, for heat shrinkable boot, shielded, sealed - Product standard
• EN-3661-001 - Part 001: Technical Specification, Aerospace Series - Circuit Breakers, Single-Pole, T
• EN-3661-005 - Aerospace Series - Circuit Breakers, Single-Pole, Temperature Compensated, Rated Curre
• EN-3661-006 - Part 006: With Polarized Signal Contact - Bus Bar Version - Product Standard, Aerospa
• EN-3662-001 - Part 001: Technical Specification, Aerospace Series - Circuit Breakers, Three-Pole, Te
• EN-3662-005 - Part 005: With Polarized Signal Contact - Product Standard, Aerospace Series - Circui
• EN-3662-006 - Part 006: With Polarized Signal Contact - Bus-Bar Version - Product Standard, Aerospa
• EN-3682-001 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 Degrees C continuous - Part 001: Technical specification
• EN-3682-002 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 Degrees C continuous - Part 002: Specification of performance and contact arrangements
• EN-3682-003 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 Degrees C continuous - Part 003: Inserts - Product standard
• EN-3682-004 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 Degrees C continuous - Part 004: Size 2 receptacle - Product standard
• EN-3682-005 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 Degrees C continuous - Part 005: Size 2 plug - Product standard
• EN-3682-006 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 Degrees C continuous - Part 006: Size 3 receptacle - Product standard
• EN-3682-007 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 Degrees C continuous - Part 007: Size 3 plug - Product standard
• EN-3682-008 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 Degrees C continuous - Part 008: Size 4 receptacle - Product standard
• EN-3682-009 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 Degrees C continuous - Part 009: Size 4 plug - Product standard
• EN-3708-001 - Part 001: Technical Specification, Aerospace Series - Modular Interconnection Systems
• EN-3708-002 - Part 002: Performance Specification, Aerospace Series - Modular Interconnection System
• EN-3708-003 - Part 003: Removable Feedback Modules Version, Sealed - Product Standard, Aerospace Ser
• EN-3708-004 - Part 004: Removable Feedback Modules Version, Aerospace Series - Modular Interconnecti
• EN-3708-005 - Part 005: Frames With Accessories for Feedback Modules Version, Sealed & Unsealed - Pr
• EN-3716-001 - Part 001: Technical Specification; Aerospace Series - Connector, Single-Way, With Tria
• EN-3716-002 - Part 002: Conditions of Use & List of Product Standards; Aerospace Series - Connectors
• EN-3716-003 - Part 003: Solder Receptacle - Product Standard; Aerospace Series - Connectors, Single-
• EN-3716-004 - Aerospace series - Connectors, single-way with triaxial interface for transmission of digital data - Part 004: Solder plug and terminator - Product standard
• EN-3716-005 - Aerospace Series - Connector, Single-Way With Triaxial Interface, for Transmission Of
• EN-3716-006 - Aerospace Series - Connector, Single-Way With Triaxial Interface, for Transmission Of
• EN-3719 - Aerospace Series - Aluminium or Aluminium Alloy Conductors for Electrical Cables - Pro
• EN-3733-001 - Aerospace Series - Connector, Optical, Circular, Single Channel, Coupled by Self-Locki
• EN-3733-002 - Aerospace Series - Connector, Optical, Circular, Single Channel, Coupled by Self-Locki
• EN-3733-003 - Aerospace Series - Connector, Optical, Circular, Single Channel, Coupled by Self-Locki
• EN-3733-004 - Part 004: Receptacle, Connector, Four Hole Fixing Cable To En-4532, Product Standard,
• EN-3733-005 - Part 005: Receptacle, Connector, Two Hole Fixing Cable According To En-4532 - Product
• EN-3733-006 - Part 006: Receptacle, Connector, Jam Nut Fixing for Cable According To En-4532 - Produ
• EN-3733-007 - Part 007: Ferrule (Optical Contact) for En-4532 (200 Um/280 Um Fibre) - Product Stand
• EN-3733-008 - Part 008: Plug Sub-Assembly for Cable To En-4532 (200 Um/280 Um Fibre) - Product Stand
• EN-3733-009 - Part 009: Receptacle Sub-Assembly for Cable To En-4532 (200 Um/280 Um Fibre) - Produc
• EN-3733-101 - Part 101: Protective Cover Receptacle - Product Standard, Aerospace Series - Connector
• EN-3733-103 - Part 103: Protective Cover Jam Nut Receptacle - Product Standard, Aerospace Series - C
• EN-3733-104 - Part 104: Receptacle Connector Dummy Four Holes Fixing - Product Standard, Aerospace S
• EN-3733-105 - Part 105: Receptacle Connector Dummy Two Holes Fixing - Product Standard, Aerospace Se
• EN-3733-106 - Part 106: Receptacle Connector Dummy Jam Nut - Product Standard, Aerospace Series - Co
• EN-3733-108 - Part 108: Cable Support Boot - Product Standard, Aerospace Series - Connector, Optical
• EN-3745-100 - Part 100: General, Aerospace Series - Fibres & Cables, Optical, Aircraft Use - Test Me
• EN-3745-202 - Aerospace Series, Fibres & Cables, Optical, Aircraft Use, Test Methods, Fibre Dimensio
• EN-3745-203 - Part 203: Cable Dimensions, Aerospace Series - Fibres & Cables, Optical, Aircraft Use
• EN-3745-303 - Part 303: Bandwidth, Aerospace Series - Fibres & Cables, Optical, Aircraft Use - Test
• EN-3745-306 - Aerospace Series, Fibres & Cables, Optical, Aircraft Use, Test Methods, Variation of A
• EN-3745-406 - Aerospace Series, Fibres & Cables, Optical, Aircraft Use, Test Methods, Cold Bend Test
• EN-3745-407 - Aerospace Series, Fibres & Cables, Optical, Aircraft Use, Test Methods, Flammability
• EN-3745-410 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life
• EN-3745-411 - Part 411: Resistance To Fluids, Aerospace Series - Fibres & Cables, Optical, Aircraft
• EN-3745-412 - Aerospace Series, Fibres & Cables, Optical, Aircraft Use, Test Methods, Humidity Resis
• EN-3745-501 - Aerospace Series, Fibres & Cables, Optical, Aircraft Use, Test Methods, Optical Fibre
• EN-3745-502 - Aerospace Series, Fibres & Cables, Optical, Aircraft Use, Test Methods, Tensile Streng
• EN-3745-504 - Aerospace Series, Fibres & Cables, Optical, Aircraft Use, Test Methods, Micro Bending
• EN-3745-505 - Part 505: Cable Tensile Strength, Aerospace Series - Fibres & Cables, Optical, Aircra
• EN-3745-511 - Aerospace Series, Fibres & Cables, Optical, Aircraft Use, Test Methods, Cable To Cable
• EN-3745-514 - Part 514: Cable Twist Bend, Aerospace Series - Fibres & Cables, Optical, Aircraft Use
• EN-3745-601 - Part 601: Smoke Density, Aerospace Series - Fibres & Cables, Optical, Aircraft Use - T
• EN-3745-602 - Part 602: Toxicity, Aerospace Series - Fibres & Cables, Optical, Aircraft Use - Test M
• EN-3745-603 - Part 603: Nuclear Radiation, Aerospace Series - Fibres & Cables, Optical, Aircraft Use
• EN-3745-705 - Part 705: Contrast Measurement, Aerospace Series - Fibres & Cables, Optical, Aircraft
• EN-3773-001 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification
• EN-3773-006 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 mm blade terminal - Product standard
• EN-3774-001 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification
• EN-3774-004 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard
• EN-3838 - Aerospace Series - Requirements & Tests on User-Applied Markings on Aircraft Electrica
• EN-3841-308 - Aerospace Series, Circuit Breakers, Test Methods, Lightning
• EN-3909 - Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies
• EN-4008-001 - Part 001: Technical Specification, Aerospace Series - Elements of Electrical & Optical
• EN-4008-002 - Part 002: List of Product Standards, Aerospace Series - Elements of Electrical & Optic
• EN-4008-003 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 003: Positioner for crimping tool M22520/2-01 - Product standard
• EN-4008-004 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 004: Die for crimping tool M22520/5-01 - Product standard
• EN-4008-005 - Part 005: Positioner for Crimping Tool m22520/2-01 - Product Standard, Aerospace Serie
• EN-4008-006 - Part 006: Positioner for Crimping Tool m22520/7 - Product Standard, Aerospace Series -
• EN-4008-007 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard
• EN-4008-008 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 008: Positioner for crimping tool M22520/7-01 - Product standard
• EN-4008-011 - Part 011: Positioner for Crimping Tool m22520/2-01 - Product Standard, Aerospace Serie
• EN-4008-012 - Part 012: Positioner for Crimping Tool m22520/2-01 - Product Standard, Aerospace Serie
• EN-4008-013 - Part 013: Positioner for Crimping Tool m22520/2-01 - Product Standard, Aerospace Serie
• EN-4008-014 - Part 014: Turret for Crimping Tool m22520/31-01 - Product Standard, Aerospace Series -
• EN-4008-015 - Part 015: Positioner for Crimping Tool m22520/2-01 - Product Standard, Aerospace Serie
• EN-4008-017 - Part 017: Head for Crimping Tool m22520/4-01 - Crimping Tools & Associated Accessories
• EN-4008-018 - Aerospace series - Elements of electrical and optical connection - Crimping tool and associated accessories - Part 018: Positioner for crimping tool M22520/2-01 - Product standard
• EN-4049-001 - Part 001: Technical Specification, Aerospace Series - Thermocouple Extension Cable - O
• EN-4049-003 - Part 003: Single Core Nickel Chromium/Nickel Aluminium - Product Standard, Aerospace S
• EN-4049-004 - Part 004: Two Core Nickel Chromium/Nickel Aluminium Shielded & Jacketed - Product Stan
• EN-4056-001 - Aerospace series - Cable ties for harnesses - Part 001: Technical specification
• EN-4056-002 - Aerospace series - Cable ties for harnesses - Part 002: Index of product standards
• EN-4056-003 - Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 Degrees C to 105 Degrees C and -65 Degrees C to 150 Degrees C - Product standard
• EN-4056-004 - Aerospace series - Cable ties for harnesses - Part 004: Plastic cable ties - For operating temperatures - 55 Degrees C to 105 Degrees C and - 55 Degrees C to 150 Degrees C - Product standard
• EN-4056-006 - Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - For operating temperatures -55 Degrees C to 240 Degrees C - Product standard
• EN-4057-100 - Part 100: General, Aerospace Series - Cable Ties for Harnessneral
• EN-4057-302 - Part 302: Flammability, Aerospace Series - Cable Ties for Harnesses - Test Methods
• EN-4057-303 - Part 303: Resistance To Fluids, Aerospace Series - Cable Ties for Harnesses - Test Met
• EN-4057-304 - Part 304: Loop Tensile Strength at Maximum Working Temperature, Aerospace Series - Cab
• EN-4057-306 - Part 306: Heat Ageing Test, Aerospace Series - Cable Ties for Harnesses - Test Methods
• EN-4057-307 - Part 307: Resistance To Ultra Violet Radiation, Aerospace Series - Cable Ties for Harn
• EN-4057-402 - Aerospace series - Cable ties for harnesses - Test methods - Part 402: Life cycle
• EN-4057-404 - Part 404: Low Temperature Installation, Aerospace Series - Cable Ties for Harnesses -
• EN-4057-406 - Part 406: Locking Device Retention, Aerospace Series - Cable Ties for Harnesses - Test
• EN-4165-001 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 Degrees C continuous - Part 001: Technical specification
• EN-4165-002 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 Degrees C continuous - Part 002: Specification of performance and contact arrangements
• EN-4165-003 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 Degrees C continuous - Part 003: Modules series 2 and series 3 - Product standard
• EN-4165-004 - Part 004: Stackable Mounting Receptacle 2 & 4 Modules, Series 2 - Product Standard, Ae
• EN-4165-005 - Aerospace Series, Connectors, Electrical, Rectangular, Modular, Operating Temperatures
• EN-4165-006 - Part 006: Plug for 2 & 4 Modules, Series 2 - Product Standard, Aerospace Series - Conn
• EN-4165-007 - Part 007: Plug for 2 & 4 Modules, Series 3 - Product Standard, Aerospace Series - Conn
• EN-4165-008 - Aerospace Series - Connectors, Electrical, Rectangular, Modular - Operating Temperatur
• EN-4165-009 - Part 009: Rack & Panel Plug for 2 & 4 Modules, Series 3 - Product Standard, Aerospace
• EN-4165-010 - Part 010: Rack & Panel Rear Mounted Plug for 2 & 4 Modules, Series 2 - Product Standa
• EN-4165-011 - Part 011: Flange Mounting Receptacle 2 & 4 Modules, Series 2 - Product Standard, Aeros
• EN-4165-013 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 Degrees C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard
• EN-4165-014 - Part 014:Shielded Accessory Body, 2 & 4 Modules for Connectors, Series 2 & Series 3 -
• EN-4165-015 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 Degrees C continuous - Part 015: Round chimney for accessory (1 per module cavity), 2 and 4 modules - Product standard
• EN-4165-016 - Part 016 Double Oval Chimney for Accessory (1 per 2 Modules) - Product Standard, Aeros
• EN-4165-017 - Part 017: Blank Chimney for Accessory (1 per Module Cavity) - Product Standard, Aeros
• EN-4165-018 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 Degrees C continuous - Part 018: Protective cover for all receptacles series 2 - Product standard
• EN-4165-020 - Part 020: Coupling System Keyway for Receptacle - Product Standard, Aerospace Series -
• EN-4165-021 - Part 021: Coupling System Keyway for Plug - Product Standard, Aerospace Series - Conne
• EN-4165-023 - Part 023: Tooling for Assembly of Receptacle Coding Component - Product Standard, Aero
• EN-4165-024 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 Degrees C continuous - Part 024: Single module plug - Product standard
• EN-4165-025 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 Degrees C continuous - Part 025: Single module receptacle - Product standard
• EN-4165-026 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 Degrees C continuous - Part 026: Accessories for single module connector - Product standard
• EN-4165-027 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 Degrees C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 - Product standard
• EN-4199-001 - Aerospace series - Bonding straps for aircraft - Part 001: Technical specification
• EN-4199-002 - Part 002: Index of Product Standard; Aerospace Series - Bonding Straps for Aircraft
• EN-4199-003 - Aerospace series - Bonding straps for aircraft - Part 003: Bonding strap assemblies with flat braided conductor copper, tin plated - 65 Degrees C up to 150 Degrees C and copper, nickel plated - 65 Degrees C up to 260 Degrees C - Product standard
• EN-4199-004 - Aerospace series - Bonding straps for aircraft - Part 004: Round bonding straps, copper, tin plated -65 Degrees C up to 150 Degrees C and nickel plated -65 Degrees C up to 260 Degrees C - Product Standard
• EN-4199-005 - Part 005: Flat Braid Conductors Copper, Tin Plated -65 Degrees C Up To 150 Degrees C &
• EN-4199-006 - Part 006: Round Braid Copper Conductors for Bonding Straps, Tin Plated Up To 150 Degr
• EN-4529-001 - Part 001: Technical Specification; Aerospace Series - Elements of Electrical & Optical
• EN-4529-002 - Part 002: Index of Product Standards; Aerospace Series - Elements of Electrical & Opti
• EN-4529-003 - Part 003: Class T - Product Standard; Aerospace Series - Elements of Electrical & Opti
• EN-4530-001 - Part 001: Technical Specification, Aerospace Series - Sealing Sleeves Used in Elements
• EN-4530-002 - Part 002: List & Utilization of Sealing Sleeves, Aerospace Series - Sealing Sleeves Us
• EN-4530-005 - Part 005: Sealing Sleeves for External Diameter Cable 3 mm To 4,1 mm - Product Standar
• EN-4530-006 - Part 006: Sealing Sleeves for External Diameter Cable 4,68 mm - Product Standard, Aero
• EN-4531-001 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 001: Technical specification
• EN-4531-002 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements
• EN-4531-003 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 003: Square flange receptacle - Product standard
• EN-4531-004 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 004: Jam nut receptacle - Product standard
• EN-4531-005 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 005: Plug - Product standard
• EN-4531-101 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641 multimode cable -55 Degrees C to 125 Degrees C - Product standard
• EN-4531-901 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 901: Filler plugs - Product standard
• EN-4532 - Aerospace Series - Cables, Optical, Single Core, 200 Um/280Um Fibre, 2,5 mm Outer Jack
• EN-4533-001 - Part 001: Termination Methods & Tools, Aerospace Series - Fibre Optic Systems - Handbo
• EN-4533-002 - Part 002: Test & Measurement, Aerospace Series - Fibre Optic Systems - Handbook
• EN-4533-004 - Part 004: Repair, Maintenance & Inspection, Aerospace Series - Fibre Optc Systems - Ha
• EN-4604-001 - Part 001: Technical Specification, Aerospace Series - Cable, Electrical, for Signal Tr
• EN-4604-002 - Part 002: General, Aerospace Series - Cable, Electrical, for Signal Transmission
• EN-4604-003 - Part 003: Cable, Coaxial, 50 Ohm, 200 Degrees C, Type Wz - Product Standard, Aerospace
• EN-4604-004 - Part 004: Cable, Microcoaxial, High Immunity, 50 Ohms, 200 Degree C, Type Ws - Product
• EN-4604-005 - Aerospace series - Cable, electrical, for signal transmission - Part 005: Cable, coaxial, 75 ohmx, 200 Degrees C, type WL - Product standard
• EN-4604-006 - Part 006: Cable, Coaxial, 50 Ohm, 200 Degrees C, Type Wm - Product Standard, Aerospace
• EN-4604-007 - Part 007: Cable, Coaxial, 50 Ohms, 200 Degree C, Type Wn - Product Standard, Aerospace
• EN-4604-008 - Part 008: Cable, Coaxial, 50 Ohms, 200 Degrees C, Type Wd - Product Standard, Aerospa
• EN-4604-009 - Aerospace series - Cable, electrical, for signal transmission - Part 009: Cable, coaxial, light weight, 50 ohms, 180 Degrees C, type KW (light WN) - Product standard
• EN-4604-010 - Aerospace series - Cable, electrical, for signal transmission - Part 010 : Cable, coaxial, light weight, 50 Ohms, 200 DegC, type KX (light WD) - Product standard
• EN-4608-001 - Part 001: Technical Specification, Aerospace Series - Cable, Electrical, Fire Resistan
• EN-4608-002 - Part 002: General, Aerospace Series - Cable, Electrical, Fire Resistant - Single & Twi
• EN-4608-003 - Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 Degrees C and 260 Degrees C - Part 003: DN family - Lightweight - UV Laser printable - Product standard
• EN-4608-004 - Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 Degrees C and 260 Degrees C - Part 004: DW family - Lightweight - UV Laser printable - Product standard
• EN-4608-005 - Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 Degrees C and 260 Degrees C - Part 005: DW family - Lightweight two-core gauge 24 for data transmission - UV laser printable - Product standard
• EN-4611-002 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 002: General
• EN-4611-004 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 Degrees C and 135 Degrees C - Dual extruded wall for open applications - UV laser printable - Product standard
• EN-4611-005 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper GÇö Operating temperatures, between - 65 Degrees C and 150 Degrees C - Single extruded wall for enclosed applications - UV laser printable - Product standard
• EN-4611-006 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper - Operating temperatures, between -65 Degrees C and 150 Degrees C - Dual extruded wall for open applications - UV laser printable - Product standard
• EN-4611-007 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 007: Nickel plated copper - Operating temperatures, between GÇô65 Degrees C and 150 Degrees C - Dual extruded wall for open applications - UV laser printable - Product standard
• EN-4611-008 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating temperatures, between GÇô65 Degrees C and 150 Degrees C - Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
• EN-4612-002 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 002: General
• EN-4612-003 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - jacketed or screened and jacketed - Part 003: Tin plated copper - Operating temperatures, between - 65 Degrees C and 135 Degrees C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• EN-4612-004 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 004: Tin plated copper - Operating temperatures, between - 65 Degrees C and 135 Degrees C - Single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
• EN-4612-005 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between - 65 Degrees C and 135 Degrees C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• EN-4612-006 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 006: Tin plated copper - Operating temperatures, between - 65 Degrees C and 135 Degrees C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
• EN-4612-007 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 007: Silver plated copper - Operating temperatures, between - 65 Degrees C and 150 Degrees C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• EN-4612-008 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between - 65 Degrees C and 150 Degrees C - single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
• EN-4612-009 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 009: Silver plated copper - Operating temperatures, between - 65 Degrees C and 150 Degrees C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• EN-4612-010 - Aerospace series - Cables, electrical, for general Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 010: Silver plated copper - Operating temperatures, between - 65 Degrees C and 150 Degrees C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
• EN-4612-011 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 011: Nickel plated copper - Operating temperatures, between - 65 Degrees C and 150 Degrees C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• EN-4612-012 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 012: Nickel plated copper - Operating temperatures, between - 65 Degrees C and 150 Degrees C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
• EN-4612-013 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 013: SX, TC and UC - Nickel plated copper - Operating temperatures, between - 65 Degrees C and 150 Degrees C - Single extruded wall for equipment only, with jacket and screen (spiral) - UV laser printable - Product standard
• EN-4626-001 - Part 001: Technical Specification, Aerospace Series - Connectors, Optical, Rectangular
• EN-4626-002 - Part 002: Specification of Performance & Contact Arrangements, Aerospace Series - Conn
• EN-4626-003 - Part 003: Adaptor for Plug, Aerospace Series - Connectors, Optical, Rectangular, Multi
• EN-4626-004 - Part 004: Adaptor for Receptacle, Aerospace Series - Connectors, Optical, Rectangular,
• EN-4626-101 - Part 101: Optical Contact (Sub-Assembly) for Plug - Product Standard, Aerospace Serie
• EN-4626-201 - Part 201: Optical Contact (Sub-Assembly) for Receptacle - Product Standard, Aerospace
• EN-4626-202 - Aerospace Series - Connectors, Optical, Rectangular, Multicontact, Rack & Panel, Quadr
• EN-4639-002 - Part 002: List of Product Standards, Aerospace Series - Connectors, Optical, Rectangul
• EN-4639-003 - Part 003: Male Optical Module - Product Standard, Aerospace Series - Connectors, Opti
• EN-4639-004 - Part 004: Female Optical Module - Product Standard, Aerospace Series - Connectors, Opt
• EN-4639-005 - Part 005: Removable Alignment Sleeve Holder - Product Standard, Aerospace Series - Con
• EN-4639-101 - Part 101: Optical Contact for Cable En-4641-100 - Operating Temperature Between -65 D
• EN-4639-102 - Part 102: Optical Contact for Cable En-4641-102 - Operating Temperatures Between -55
• EN-4640-001 - Part 001: Technical Specification, Aerospace Series - Connectors, Optical, Rectangular
• EN-4640-002 - Part 002: List of Product Standards, Aerospace Series - Connectors, Optical, Rectangul
• EN-4640-003 - Part 003: Plug Optical Connector - Product Standard, Aerospace Series - Connectors, Op
• EN-4640-004 - Part 004: Receptacle Optical Connector - Product Standard, Aerospace Series - Connecto
• EN-4641-001 - Part 001: Technical Specification, Aerospace Series - Cables, Optical, 125 Um Diameter
• EN-4641-102 - PART 102: SEMI-LOOSE 62,5/125 UM GI FIBRE NOMINAl 1,8 MM OUTSIDE DIAMETER - PRODUCT ST
• EN-4644-001 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 001: Technical specification
• EN-4644-002 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 002: Specification of performance and contact arrangements
• EN-4644-003 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 003: Rectangular inserts - Product standard
• EN-4644-011 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 011: Plug, size 1, without mounting holes, class A, C and E - Product standard
• EN-4644-012 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 012: Receptacle, size 1, class A, C and E - Product standard
• EN-4644-013 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 013: Plug, size 1, with ground block, without mounting holes, class B and F - Product standard
• EN-4644-014 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 014: Receptacle, size 1, with ground block, class B and F - Product standard
• EN-4644-021 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 021: Plug, size 2, without mounting holes, class A, C and E - Product standard
• EN-4644-022 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 022: Plug, size 2, with mounting holes, class A, C and E - Product standard
• EN-4644-023 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 023: Plug, size 2, with ground block, class B and F - Product standard
• EN-4644-024 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 024: Receptacle size 2, class A, C and E - Product standard
• EN-4644-025 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 025: Receptacle, size 2, with flange, class A, C and E - Product standard
• EN-4644-026 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 026: Receptacle size 2 with ground block, class B and F - Product standard
• EN-4644-131 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 131: Size 3 plug for rack and panel applications, class C and D - Product standard
• EN-4644-133 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 133: Size 3 receptacle for rack and panel application, class C and D - Product Standard
• EN-4644-141 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 141: Size 4 plug for rack and panel applications, class C and D - Product standard
• EN-4644-142 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 142: Size 4 receptacle for rack and panel application, class C and D - Product standard
• EN-4644-201 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 201: Locking and polarizing hardware - Product standard
• EN-4645-001 - Part 001: Technical Specification, Aerospace Series - Connectors, Optical, Circular, S
• EN-4645-002 - Part 002: Specification of Performance & Contact Arrangements, Aerospace Series - Conn
• EN-4645-003 - Part 003: Square Flange Receptacle - Product Standard, Aerospace Series - Connectors,
• EN-4645-004 - Part 004: Jam Nut Receptacle - Product Standard, Aerospace Series - Connectors, Optica
• EN-4645-005 - Part 005: Plug - Product Standard, Aerospace Series - Connectors, Optical, Circular, S
• EN-4650 - Aerospace Series, Wire & Cable Marking Process, Uv Laser
• EN-4651 - Aerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard
• EN-4652-001 - Aerospace series - Connectors, coaxial, radio frequency - Part 001: Technical specification
• EN-4652-002 - Aerospace series - Connectors, coaxial, radiofrequency - Part 002: Specification of performances
• EN-4652-110 - Aerospace series - Connectors, coaxial, radio frequency - Part 110: Type 1, BNC interface - Clamp nut assembly version - Straight plug - Product standard
• EN-4652-111 - Aerospace series - Connectors, coaxial, radio frequency - Part 111: Type 1, BNC interface - Clamp nut assembly version - Right angle plug - Product standard
• EN-4652-112 - Aerospace series - Connectors, coaxial, radio frequency - Part 112: Type 1, BNC interface - Clamp nut assembly version - Square flange receptacle - Product standard
• EN-4652-113 - Aerospace series - Connectors, coaxial, radio frequency - Part 113: Type 1, BNC interface - Clamp nut assembly version - Bulkhead receptacle - Product standard
• EN-4652-210 - Aerospace series - Connectors, coaxial, radio frequency - Part 210: Type 2, TNC interface - Clamp nut assembly version - Straight plug - Product standard
• EN-4652-211 - Aerospace series - Connectors, coaxial, radio frequency - Part 211: Type 2, TNC interface - Clamp nut assembly version - Right angle plug - Product standard
• EN-4652-212 - Aerospace series - Connectors, coaxial, radio frequency - Part 212: Type 2, TNC interface - Clamp nut assembly version - Square flange receptacle - Product standard
• EN-4652-213 - Aerospace series - Connectors, coaxial, radio frequency - Part 213: Type 2, TNC interface - Clamp nut assembly version - Bulkhead receptacle - Product standard
• EN-4652-220 - Aerospace series - Connectors, coaxial, radio frequency - Part 220: Type 2, TNC interface - Crimp version - Straight plug - Product standard
• EN-4652-222 - Aerospace series - Connectors, coaxial, radio frequency - Part 222: Type 2, TNC interface - Crimp version - Square flange receptacle - Product standard
• EN-4652-310 - Aerospace series - Connectors, coaxial, radio frequency - Part 310: Type 3, N interface - Clamp nut assembly version - Straight plug - Product standard
• EN-4652-311 - Aerospace series - Connectors, coaxial, radio frequency - Part 311: Type 3, N interface - Clamp nut assembly version - Right angle plug - Product standard
• EN-4652-312 - Aerospace series - Connectors, coaxial, radio frequency - Part 312: Type 3, N interface - Clamp nut assembly version - Square flange receptacle - Product standard
• EN-4652-313 - Aerospace series - Connectors, coaxial, radio frequency - Part 313: Type 3, N interface - Clamp nut assembly version - Bulkhead receptacle - Product standard
• EN-4652-320 - Aerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard
• EN-4652-321 - Aerospace series - Connectors, coaxial, radio frequency - Part 321: Type 3, N interface - Crimp assembly version - Right angle plug - Product standard
• EN-4652-322 - Aerospace series - Connectors, coaxial, radio frequency - Part 322: Type 3, N interface - Crimp version - Square flange receptacle - Product standard
• EN-4652-410 - Aerospace series - Connectors, coaxial, radio frequency - Part 410: Type 4, C interface - Clamp nut assembly version - Straight plug - Product standard
• EN-4652-411 - Aerospace series - Connectors, coaxial, radio frequency - Part 411: Type 4, C interface - Clamp nut assembly version - Right angle plug - Product standard
• EN-4652-412 - Aerospace series - Connectors, coaxial, radio frequency - Part 412: Type 4, C interface - Clamp nut assembly version - Square flange receptacle - Product standard
• EN-4652-413 - Aerospace series - Connectors, coaxial, radio frequency - Part 413: Type 4, C interface - Clamp nut assembly version - Bulkhead receptacle - Product standard
• EN-4674-001 - Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001: Technical specification
• EN-4674-002 - Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 002: General and list of product standard
• EN-4674-003 - Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 003: Open sleeve - Inside pressurized area - EMI protection 5 kA - Temperature range - 65 DegC to 200 DegC - Product standard
• EN-4674-004 - Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 004: Open sleeve - Outside pressurized area - EMI protection 10 kA - Temperature range - 65 ¦C to 200 ¦C - Product standard
• EN-4681-001 - Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 001: Technical Specification
• EN-4681-002 - Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 002: General
• EN-4681-005 - Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 005: AZ family, single, for use in low pressure atmosphere - Product standard
• EN-4681-006 - Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 006: AZA family, single and multicore assembly, for use in low pressure atmosphere - Product standard
• EN-4708-001 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 001: Technical specification
• EN-4708-101 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 101: Polyolefin sleeving - Operating temperatures -55 Degrees C to 135 Degrees C - Product standard
• EN-4708-301 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 301: Adhesive lined polyolefin sleevings - Operating temperature - 55 °C to 105 °C - Product Standard
• EN-4728 - Aerospace series - Circuit breakers, single and three poles dummies - Product standard
• EN-4830-003 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 Degrees C, for EN 4639-10X contacts - Part 003: Module - Product standard
• EN-4830-004 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 Degrees C, for EN 4639-10X contacts - Part 004: Extraction tool - Product standard
• EN-6049-001 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification
• EN-6049-002 - Part 002: General & List of Product Standards, Aerospace Series - Electrical Cables, I
• EN-6049-003 - Part 003: Braided, Tubular, Expandable - Product Standard, Aerospace Series - Electric
• EN-6049-005 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard
• EN-6049-006 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard
• EN-6049-007 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping protective sleeve, flexible post installation operating temperature from - 55 Degrees C to 260 Degrees C - Product standard
• EN-6049-008 - Aerospace series - Electrical cables, installation - Protective sleeves in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from û 55 ¦C to 200 ¦C - Pro
• EN-6049-009 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 Degrees C to 260 Degrees C - Product standard
• EN-6059-100 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General
• EN-6059-202 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 202: Dimensions and mass
• EN-6059-301 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 301: Sun light exposure
• EN-6059-302 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 302: High temperature exposure
• EN-6059-303 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids
• EN-6059-304 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 304: Flammability
• EN-6059-305 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 305: Fluid absorption
• EN-6059-308 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 308: Rapid change of temperature
• EN-6059-406 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 406: Vibration
• EN-6059-407 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 407: Mark adherence and print permanence
• EN-6059-501 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test
• EN-6059-502 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs
• EN-6059-503 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 503: Temperature rise due to rated current injected on the sleeve
• EN-6059-504 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 504: Temperature rise within a loom due to self-heating when protected by a sleeve
• EN-6059-601 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 601: Open and close
• EN-60952-1 - Aircraft batteries - Part 1: General test requirements and performance levels
• EN-60952-2 - Aircraft batteries - Part 2: Design and construction requirements
• EN-60952-3 - Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP)
• EN-6113 - Aerospace series - Circuit breaker, connecting and attachment hardware
• EN-62429 - Reliability Growth, Stress Testing for Early Failures in Unique Complex Systems
• SS-EN-16602-70-26 - Space product assurance - Crimping of high-reliability electrical connections
• SS-EN-2083 - Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard
• SS-EN-2084 - Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification
• SS-EN-2234 - Aerospace series - Cable, electrical, fire resistant - Technical specification
• SS-EN-2235 - Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification
• SS-EN-2240-001 - Aerospace series - Lamps, incandescent - Part 001: Technical specification
• SS-EN-2240-002 - Aerospace series - Lamps, incandescent - Part 002: Main characteristics
• SS-EN-2240-003 - Aerospace series - Lamps, incandescent - Part 003: Lamp, code 44 - Product standard
• SS-EN-2240-004 - Aerospace series - Lamps, incandescent - Part 004: Lamp, code 47 - Product standard
• SS-EN-2240-005 - Aerospace series - Lamps, incandescent - Part 005: Lamp, code 73 - Product standard
• SS-EN-2240-006 - Aerospace series - Lamps, incandescent - Part 006: Lamp, code 73E - Product standard
• SS-EN-2240-007 - Aerospace series - Lamps, incandescent - Part 007: Lamp, code 74 - Product standard
• SS-EN-2240-008 - Aerospace series - Lamps, incandescent - Part 008: Lamp, code 75 - Product standard
• SS-EN-2240-009 - Aerospace series - Lamps, incandescent - Part 009: Lamp, code 83 - Product standard
• SS-EN-2240-010 - Aerospace series - Lamps, incandescent - Part 010: Lamp, code 84 - Product standard
• SS-EN-2240-011 - Aerospace series - Lamps, incandescent - Part 011: Lamp, code 85 - Product standard
• SS-EN-2240-012 - Aerospace series - Lamps, incandescent - Part 012: Lamp, code 95 - Product standard
• SS-EN-2240-013 - Aerospace series - Lamps, incandescent - Part 013: Lamp, code 301 - Product standard
• SS-EN-2240-014 - Aerospace series - Lamps, incandescent - Part 014: Lamp, code 303 - Product standard
• SS-EN-2240-015 - Aerospace series - Lamps, incandescent - Part 015: Lamp, code 304 - Product standard
• SS-EN-2240-016 - Aerospace series - Lamps, incandescent - Part 016: Lamp, code 305 - Product standard
• SS-EN-2240-017 - Aerospace series - Lamps, incandescent - Part 017: Lamp, code 306 - Product standard
• SS-EN-2240-018 - Aerospace series - Lamps, incandescent - Part 018: Lamp, code 307 - Product standard
• SS-EN-2240-019 - Aerospace series - Lamps, incandescent - Part 019: Lamp, code 308 - Product standard
• SS-EN-2240-020 - Aerospace series - Lamps, incandescent - Part 020: Lamp, code 311 - Product standard
• SS-EN-2240-021 - Aerospace series - Lamps, incandescent - Part 021: Lamp, code 313 - Product standard
• SS-EN-2240-022 - Aerospace series - Lamps, incandescent - Part 022: Lamp, code 315 - Product standard
• SS-EN-2240-023 - Aerospace series - Lamps, incandescent - Part 023: Lamp, code 316 - Product standard
• SS-EN-2240-024 - Aerospace series - Lamps, incandescent - Part 024: Lamp, code 327 - Product standard
• SS-EN-2240-025 - Aerospace series - Lamps, incandescent - Part 025: Lamp, code 328 - Product standard
• SS-EN-2240-026 - Aerospace series - Lamps, incandescent - Part 026: Lamp, code 330 - Product standard
• SS-EN-2240-027 - Aerospace series - Lamps, incandescent - Part 027: Lamp, code 334 - Product standard
• SS-EN-2240-028 - Aerospace series - Lamps, incandescent - Part 028: Lamp, code 337 - Product standard
• SS-EN-2240-029 - Aerospace series - Lamps, incandescent - Part 029: Lamp, code 338 - Product standard
• SS-EN-2240-030 - Aerospace series - Lamps, incandescent - Part 030: Lamp, code 345 - Product standard
• SS-EN-2240-031 - Aerospace series - Lamps, incandescent - Part 031: Lamp, code 356 - Product standard
• SS-EN-2240-032 - Aerospace series - Lamps, incandescent - Part 032: Lamp, code 376 - Product standard
• SS-EN-2240-033 - Aerospace series - Lamps, incandescent - Part 033: Lamp, code 377 - Product standard
• SS-EN-2240-034 - Aerospace series - Lamps, incandescent - Part 034: Lamp, code 382 - Product standard
• SS-EN-2240-035 - Aerospace series - Lamps, incandescent - Part 035: Lamp, code 387 - Product standard
• SS-EN-2240-036 - Aerospace series - Lamps, incandescent - Part 036: Lamp, code 388 - Product standard
• SS-EN-2240-037 - Aerospace series - Lamps, incandescent - Part 037: Lamp, code 394 - Product standard
• SS-EN-2240-038 - Aerospace series - Lamps, incandescent - Part 038: Lamp, code 401 - Product standard
• SS-EN-2240-039 - Aerospace series - Lamps, incandescent - Part 039: Lamp, code 600 - Product standard
• SS-EN-2240-040 - Aerospace series - Lamps, incandescent - Part 040: Lamp, code 680 - Product standard
• SS-EN-2240-041 - Aerospace series - Lamps, incandescent - Part 041: Lamp, code 682 - Product standard
• SS-EN-2240-042 - Aerospace series - Lamps, incandescent - Part 042: Lamp, code 683 - Product standard
• SS-EN-2240-043 - Aerospace series - Lamps, incandescent - Part 043: Lamp, code 685 - Product standard
• SS-EN-2240-044 - Aerospace series - Lamps, incandescent - Part 044: Lamp, code 713 - Product standard
• SS-EN-2240-045 - Aerospace series - Lamps, incandescent - Part 045: Lamp, code 714 - Product standard
• SS-EN-2240-046 - Aerospace series - Lamps, incandescent - Part 046: Lamp, code 715 - Product standard
• SS-EN-2240-047 - Aerospace series - Lamps, incandescent - Part 047: Lamp, code 718 - Product standard
• SS-EN-2240-048 - Aerospace series - Lamps, incandescent - Part 048: Lamp, code 718 NPC - Product standard
• SS-EN-2240-049 - Aerospace series - Lamps, incandescent - Part 049: Lamp, code 757 - Product standard
• SS-EN-2240-050 - Aerospace series - Lamps, incandescent - Part 050: Lamp, code 1064 - Product standard
• SS-EN-2240-051 - Aerospace series - Lamps, incandescent - Part 051: Lamp, code 1163 - Product standard
• SS-EN-2240-052 - Aerospace series - Lamps, incandescent - Part 052: Lamp, code 1222 - Product standard
• SS-EN-2240-053 - Aerospace series - Lamps, incandescent - Part 053: Lamp, code 1308 - Product standard
• SS-EN-2240-054 - Aerospace series - Lamps, incandescent - Part 054: Lamp, code 1317 - Product standard
• SS-EN-2240-055 - Aerospace series - Lamps, incandescent - Part 055: Lamp, code 1495 - Product standard
• SS-EN-2240-056 - Aerospace series - Lamps, incandescent - Part 056: Lamp, code 1506 - Product standard
• SS-EN-2240-057 - Aerospace series - Lamps, incandescent - Part 057: Lamp, code 1512 - Product standard
• SS-EN-2240-058 - Aerospace series - Lamps, incandescent - Part 058: Lamp, code 1524 - Product standard
• SS-EN-2240-059 - Aerospace series - Lamps, incandescent - Part 059: Lamp, code 1591 - Product standard
• SS-EN-2240-060 - Aerospace series - Lamps, incandescent - Part 060: Lamp, code 1619 - Product standard
• SS-EN-2240-061 - Aerospace series - Lamps, incandescent - Part 061: Lamp, code 1683 - Product standard
• SS-EN-2240-062 - Aerospace series - Lamps, incandescent - Part 062: Lamp, code 1810 - Product standard
• SS-EN-2240-063 - Aerospace series - Lamps, incandescent - Part 063: Lamp, code 1815 - Product standard
• SS-EN-2240-064 - Aerospace series - Lamps, incandescent - Part 064: Lamp, code 1819 - Product standard
• SS-EN-2240-065 - Aerospace series - Lamps, incandescent - Part 065: Lamp, code 1820 - Product standard
• SS-EN-2240-066 - Aerospace series - Lamps, incandescent - Part 066: Lamp, code 1829 - Product standard
• SS-EN-2240-067 - Aerospace series - Lamps, incandescent - Part 067: Lamp, code 1843 - Product standard
• SS-EN-2240-068 - Aerospace series - Lamps, incandescent - Part 068: Lamp, code 1864 - Product standard
• SS-EN-2240-069 - Aerospace series - Lamps, incandescent - Part 069: Lamp, code 1978 - Product standard
• SS-EN-2240-070 - Aerospace series - Lamps, incandescent - Part 070: Lamp, code 2232 - Product standard
• SS-EN-2240-071 - Aerospace series - Lamps, incandescent - Part 071: Lamp, code 3011 - Product standard
• SS-EN-2240-072 - Aerospace series - Lamps, incandescent - Part 072: Lamp, code 3912 - Product standard
• SS-EN-2240-073 - Aerospace series - Lamps, incandescent - Part 073: Lamp, code 4174 - Product standard
• SS-EN-2240-074 - Aerospace series - Lamps, incandescent - Part 074: Lamp, code 5086 - Product standard
• SS-EN-2240-075 - Aerospace series - Lamps, incandescent - Part 075: Lamp, code 5448 - Product standard
• SS-EN-2240-076 - Aerospace series - Lamps, incandescent - Part 076: Lamp, code 5678 - Product standard
• SS-EN-2240-077 - Aerospace series - Lamps, incandescent - Part 077: Lamp, code 6832 - Product standard
• SS-EN-2240-078 - Aerospace series - Lamps, incandescent - Part 078: Lamp, code 6838 - Product standard
• SS-EN-2240-079 - Aerospace series - Lamps, incandescent - Part 079: Lamp, code 6839 - Product standard
• SS-EN-2240-080 - Aerospace series - Lamps, incandescent - Part 080: Lamp, code 7007-704 - Product standard
• SS-EN-2240-081 - Aerospace series - Lamps, incandescent - Part 081: Lamp, code 7070 - Product standard
• SS-EN-2240-082 - Aerospace series - Lamps, incandescent - Part 082: Lamp, code 7079 - Product standard
• SS-EN-2240-083 - Aerospace series - Lamps, incandescent - Part 083: Lamp, code 7152 - Product standard
• SS-EN-2240-084 - Aerospace series - Lamps, incandescent - Part 084: Lamp, code 7153 - Product standard
• SS-EN-2240-085 - Aerospace series - Lamps, incandescent - Part 085: Lamp, code 7265 - Product standard
• SS-EN-2240-086 - Aerospace series - Lamps, incandescent - Part 086: Lamp, code 7333 - Product standard
• SS-EN-2240-087 - Aerospace series - Lamps, incandescent - Part 087: Lamp, code 7341 - Product standard
• SS-EN-2240-088 - Aerospace series - Lamps, incandescent - Part 088: Lamp, code A7512-12 - Product standard
• SS-EN-2240-089 - Aerospace series - Lamps, incandescent - Part 089: Lamp, code A7512-24 - Product standard
• SS-EN-2240-090 - Aerospace series - Lamps, incandescent - Part 090: Lamp, code 7683 - Product standard
• SS-EN-2240-091 - Aerospace series - Lamps, incandescent - Part 091: Lamp, code 7714 - Product standard
• SS-EN-2240-092 - Aerospace series - Lamps, incandescent - Part 092: Lamp, code 7715 - Product standard
• SS-EN-2240-093 - Aerospace series - Lamps, incandescent - Part 093: Lamp, code 7839 - Product standard
• SS-EN-2240-094 - Aerospace series - Lamps, incandescent - Part 094: Lamp, code 8022 - Product standard
• SS-EN-2240-095 - Aerospace series - Lamps, incandescent - Part 095: Lamp, code 8552 - Product standard
• SS-EN-2240-096 - Aerospace series - Lamps, incandescent - Part 096: Lamp, code 72301-6 - Product standard
• SS-EN-2240-097 - Aerospace series - Lamps, incandescent - Part 097: Lamp, code 72601-12 - Product standard
• SS-EN-2240-098 - Aerospace series - Lamps, incandescent - Part 098: Lamp, code 416650 - Product standard
• SS-EN-2240-099 - Aerospace series - Lamps, incandescent - Part 099: Lamp, code 416700 - Product standard
• SS-EN-2240-100 - Aerospace series - Lamps, incandescent - Part 100: Lamp, code 2078 - Product standard
• SS-EN-2240-101 - Aerospace series - Lamps, incandescent - Part 101: Lamp, code 404-02 - Product standard
• SS-EN-2241 - Aerospace series - Lamp caps - Dimensions
• SS-EN-2242 - Aerospace series - Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
• SS-EN-2266-002 - Aerospace series - Cables, electrical, for general purpose - Operating temperature between - 55 oC and 200 oC - Part 002: General
• SS-EN-2266-003 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 degreec C and 200 degrees C - Part 003: Ink jet printable - Product standard
• SS-EN-2266-005 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 oC and 200 oC - Part 005: UV laser printable - Product standard
• SS-EN-2266-007 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 oC and 200 oC - Part 007: UV laser printable multicore jacketed cable - Product standard
• SS-EN-2266-008 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard
• SS-EN-2267-002 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General
• SS-EN-2267-003 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 oC and 260 oC - Part 003: Ink jet printable - Product standard
• SS-EN-2267-005 - Aerospace series - Cables, electrical. for general purpose - Operating temperatures between - 55 oC and 260 oC - Part 005: UV laser printable - Product standard
• SS-EN-2267-007 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 oC and 260 oC - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard
• SS-EN-2267-008 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 oC and 260 oC - Part 008: DM family, single UV laser printable and multicore assembly - Product standard
• SS-EN-2267-009 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 009: DRA family, single and multicore assembly - Product standard
• SS-EN-2267-010 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard
• SS-EN-2267-011 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 011: DZA family, single and multicore assembly for use in low pressure atmosphere - Product standard
• SS-EN-2267-012 - Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard
• SS-EN-2282 - Aerospace series - Characteristics of aircraft electrical supplies
• SS-EN-2283 - Aerospace series - Testing of aircraft wiring
• SS-EN-2346-002 - Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 oC and 260 oC - Part 002: General
• SS-EN-2346-003 - Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 oC and 260 oC - Part 003: DL family, single core - Product standard
• SS-EN-2346-004 - Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 oC and 260 oC - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard
• SS-EN-2346-005 - Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard
• SS-EN-2349-001 - Aerospace series - Requirements and test procedures for switching devices
• SS-EN-2349-201 - Aerospace series - Requirements and test procedures for relays and contactors - Part 201: Visual inspection
• SS-EN-2349-202 - Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass
• SS-EN-2349-301 - Aerospace series - Requirements and test procedures for relays and contactors - Part 301: Pick-up and drop-out voltage
• SS-EN-2349-302 - Aerospace series - Requirements and test procedures for relays and contactors - Part 302: Insulation resistance
• SS-EN-2349-303 - Aerospace series - Requirements and test procedures for relays and contactors - Part 303: Dielectric strength
• SS-EN-2349-304 - Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time
• SS-EN-2349-305 - Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time
• SS-EN-2349-306 - Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
• SS-EN-2349-307 - Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop
• SS-EN-2349-308 - Aerospace series - Requirements and test procedures for relays and contactors - Part 308: Coil current
• SS-EN-2349-309 - Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes
• SS-EN-2349-310 - Aerospace series - Requirements and test procedures for relays and contactors - Part 310: Rupture
• SS-EN-2349-312 - Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load
• SS-EN-2349-316 - Aerospace series - Requirements and test procedures for relays and contactors - Part 316: Mechanical life (Endurance at reduced load)
• SS-EN-2349-317 - Aerospace series - Requirements and test procedures for relays and contactors - Part 317: Service life of coil switching device
• SS-EN-2349-318 - Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature
• SS-EN-2349-319 - Aerospace series - Requirements and test procedures for relays and contactors - Part 319: Miss test
• SS-EN-2349-402 - Aerospace series - Requirements and test procedures for relays and contactors - Part 402: Corrosion, salt spray
• SS-EN-2349-405 - Aerospace series - Requirements and test procedures for relays and contactors - Part 405: Fluid resistance
• SS-EN-2349-407 - Aerospace series - Requirements and test procedures for relays and contactors - Part 407: Cold/low pressure and moist heat
• SS-EN-2349-409 - Aerospace series - Requirements and test procedures for relays and contactors - Part 409: Ozone resistance
• SS-EN-2349-410 - Aerospace series - Requirements and test procedures for relays and contactors - Part 410: Mould
• SS-EN-2349-411 - Aerospace series - Requirements and test procedures for relays and contactors - Part 411: Temperature change
• SS-EN-2349-412 - Aerospace series - Requirements and test procedures for relays and contactors - Part 412: Seal
• SS-EN-2349-413 - Aerospace series - Requirements and test procedures for relays and contactors - Part 413: Vibration, sinusoidal and random
• SS-EN-2349-414 - Aerospace series - Requirements and test procedures for relays and contactors - Part 414: Mechanical shock
• SS-EN-2349-415 - Aerospace series - Requirements and test procedures for relays and contactors - Part 415: Acceleration
• SS-EN-2349-601 - Aerospace series - Requirements and test procedures for relays and contactors - Part 601: Compass safety distance
• SS-EN-2350 - Aerospace series - Circuit breakers - Technical specification
• SS-EN-2495 - Aerospace series - Single-pole circuit breakers temperature compensated rated currents up to 25 A -Product standard
• SS-EN-2591 - Aerospace series - Elements of electrical and optical connection - Test methods - General
• SS-EN-2591-100 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General
• SS-EN-2591-102 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass
• SS-EN-2591-201 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 201: Contact resistance - Low level
• SS-EN-2591-202 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 202: Contact resistance at rated current
• SS-EN-2591-203 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 203: Electrical continuity at microvolt level
• SS-EN-2591-204 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 204: Discontinuity of contacts in the microsecond range
• SS-EN-2591-205 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 205: Housing (shell) electricalcontinuity
• SS-EN-2591-206 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 206: Measurement of insulation resistance
• SS-EN-2591-207 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 207: Voltage proof test
• SS-EN-2591-208 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 208: Temperature rise due to rated current
• SS-EN-2591-209 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 209: Current temperature derating
• SS-EN-2591-210 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Elcetrical overload
• SS-EN-2591-211 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 211: Capacitance
• SS-EN-2591-212 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance
• SS-EN-2591-213 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz
• SS-EN-2591-214 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse
• SS-EN-2591-216 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 216: Engagement depth of contacts
• SS-EN-2591-217 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 217: Voltage drop under specified current for terminal lugs and in-line splices
• SS-EN-2591-218 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling
• SS-EN-2591-219 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 219: Voltage strength for insulatad terminal lugs and in-line splices
• SS-EN-2591-220 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current temperature cycling
• SS-EN-2591-221 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 221: Voltage Standing Wave Ratio (VSWR)
• SS-EN-2591-222 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 222: Insertion Loss (I.L.)
• SS-EN-2591-223 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact
• SS-EN-2591-224 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage
• SS-EN-2591-225 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 225: RF high potential withstanding voltage
• SS-EN-2591-226 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 226: Corona level
• SS-EN-2591-227 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 227: Partial discharges test
• SS-EN-2591-228 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 228: Ferrule withdrawal force
• SS-EN-2591-301 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 301: Endurance at temperature
• SS-EN-2591-302 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 302: Climatic sequence
• SS-EN-2591-303 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 303: Cold/low pressure and damp heat
• SS-EN-2591-304 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 304: Damp heat steady state
• SS-EN-2591-305 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature
• SS-EN-2591-306 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth
• SS-EN-2591-307 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist
• SS-EN-2591-308 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 308: Sand and dust
• SS-EN-2591-309 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 309: Dry heat
• SS-EN-2591-310 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 310: Cold
• SS-EN-2591-311 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 311: Low airpressure
• SS-EN-2591-312 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage
• SS-EN-2591-313 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 313: Artificial rain
• SS-EN-2591-314 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 314: Immersion at low air pressure
• SS-EN-2591-315 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance
• SS-EN-2591-316 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 316: Ozone resistance
• SS-EN-2591-317 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 317: Flammability
• SS-EN-2591-318 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance
• SS-EN-2591-319 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 319: Gastightness of solderless wrapped connections
• SS-EN-2591-320 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 320: Simulated solar radiation at ground level
• SS-EN-2591-321 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 321: Damp heat, cyclic test
• SS-EN-2591-322 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 322: Hermeticity
• SS-EN-2591-323 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 323: Thermal shock
• SS-EN-2591-324 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 324: Interfacial
• SS-EN-2591-325 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 325: Ice resistance
• SS-EN-2591-326 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 326: Fire immersion test
• SS-EN-2591-401 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 401: Acceleration, steady state
• SS-EN-2591-402 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock
• SS-EN-2591-403 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
• SS-EN-2591-404 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 404: Transverse load
• SS-EN-2591-405 - Aerospace - Elements of electrical and optical connection - Test methods - Part 405: Axial load
• SS-EN-2591-406 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 406: Mechanical endurance
• SS-EN-2591-407 - See the swedish title
• SS-EN-2591-408 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 408: Mating and unmating forces
• SS-EN-2591-409 - See the swedish title
• SS-EN-2591-410 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 410: Insert retention in housing (axial)
• SS-EN-2591-411 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 411: Insert retention in housing (torsinal)
• SS-EN-2591-412 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 412: Contact insertion and extraction forces
• SS-EN-2591-413 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 413: Holding force of grounding spring system
• SS-EN-2591-414 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 414: Unmating of lanyard release connectors
• SS-EN-2591-415 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 415: Test probe damage (female contacts)
• SS-EN-2591-416 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength
• SS-EN-2591-417 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection)
• SS-EN-2591-418 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 418: Gauge insertion/extraction forces (female contacts)
• SS-EN-2591-419 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 419: Stability of male contacts in insert
• SS-EN-2591-420 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories
• SS-EN-2591-421 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 421: Free fall
• SS-EN-2591-422 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 422: Locking wire hole strength
• SS-EN-2591-423 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 423: Connector rear accessories thread strength
• SS-EN-2591-424 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 424: Stripping force, solderless wrapped connections
• SS-EN-2591-425 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 425: Unwrapping capability, solderless wrapped connections
• SS-EN-2591-426 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 426: Contact retention system effectiveness
• SS-EN-2591-427 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 427: Robustness of protective cover attachment
• SS-EN-2591-428 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs
• SS-EN-2591-501 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability
• SS-EN-2591-502 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 502: Restricted entry
• SS-EN-2591-503 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping
• SS-EN-2591-505 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 505: Contact protection effectiveness (scoop-proof)
• SS-EN-2591-506 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 506: Use of tools
• SS-EN-2591-507 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity
• SS-EN-2591-508 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts
• SS-EN-2591-509 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts
• SS-EN-2591-512 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell
• SS-EN-2591-513 - Aerospace series - Elements of electrical and optical connection - Test methods - Part: 513: Magnetic permeability
• SS-EN-2591-514 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux
• SS-EN-2591-515 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 515: Hydrolytic stability
• SS-EN-2591-601 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 601: Optical elements - Insertion loss
• SS-EN-2591-602 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 602: Optical elements - Variation of attenuation and optical discontinuity
• SS-EN-2591-603 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 603: Change of power distribution
• SS-EN-2591-604 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 604: Optical elements - Cleaning capability of optical face
• SS-EN-2591-605 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 605: Optical elements - Return loss
• SS-EN-2591-606 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 606: Optical elements - Crosstalk
• SS-EN-2591-607 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 607: Optical elements - Immunity to ambient light coupling
• SS-EN-2591-609 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cycling flexing
• SS-EN-2591-610 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 610: Optical elements - Effectiveness of cable attachement - Cable pulling
• SS-EN-2591-6101 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6101: Optical elements - Visual examination
• SS-EN-2591-611 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 611: Optical elements - Effectiveness of cable attachment - Cable torsion
• SS-EN-2591-612 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 612: Optical elements - Effectiveness of cable attachment - Cable axial compression
• SS-EN-2591-613 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 613: Optical elements - Impact test
• SS-EN-2591-614 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 614: Optical elements - Connector radial compression
• SS-EN-2591-615 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 615: Optical elements - Connection integrity at temperature
• SS-EN-2591-617 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 617: Optical elements - Temperature cycling
• SS-EN-2591-6301 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature
• SS-EN-2591-6303 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6303: Optical elements - Cold/low pressure and damp heat
• SS-EN-2591-6305 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6305: Optical elements - Rapid change of temperature
• SS-EN-2591-6306 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6306: Optical elements - Mould growth
• SS-EN-2591-6307 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6307: Optical elements - Salt mist
• SS-EN-2591-6314 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6314: Optical elements - Immersion at low air pressure
• SS-EN-2591-6315 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6315: Optical elements - Fluid resistance
• SS-EN-2591-6316 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6316: Optical elements - Ozone resistance
• SS-EN-2591-6317 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6317: Optical elements - Flammability
• SS-EN-2591-6318 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6318: Optical elements - Fire resistance
• SS-EN-2591-6321 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test
• SS-EN-2591-6323 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6323: Optical elements - Thermal shock (Hermetically sealed devices)
• SS-EN-2591-6324 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6324: Optical elements - Interfacial sealing
• SS-EN-2591-6401 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6401: Optical elements - Acceleration steady state
• SS-EN-2591-6404 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse load
• SS-EN-2591-6405 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6405: Optical elements - Axial load
• SS-EN-2591-6406 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6406: Optical elements - Mechanical endurance
• SS-EN-2591-6414 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6414: Optical elements - Unmating of lanyard release optical connection elements
• SS-EN-2591-6415 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage
• SS-EN-2591-701 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 701: Electrical elements - Measurement of open circuit impedance of couplers
• SS-EN-2591-702 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 702: Electrical elements - Measurement of signal distortion of couplers
• SS-EN-2591-703 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 703: Electrical elements - Common mode rejection of couplers
• SS-EN-2591-704 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 704: Electrical elements - Measurement of turns ratio on a transformer used in a coupler
• SS-EN-2591-705 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 705: Electrical elements - Measurement of stub input impedance of couplers
• SS-EN-2591-706 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 706: Electrical elements - Transmission test
• SS-EN-2591-707 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 707: Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator
• SS-EN-2591-708 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 708: Electrical elements - Measurement of surface transfer impedance of couplers
• SS-EN-2591-709 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 709: Electrical elements - Tensile strength of couplers
• SS-EN-2591-7301 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 7301: Electrical elements - Temperature endurance of couplers
• SS-EN-2592 - Aerospace series - Three-pole circuit breakers temperature compensated rated currents up to 25 A - Product standard
• SS-EN-2593-001 - Aerospace series - Bases for 10 A electromagnetic plug-in relays, two and four poles double thrown - Part 001: Technical specification
• SS-EN-2665-001 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification
• SS-EN-2665-003 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals - Product standard
• SS-EN-2665-004 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 004: UNC thread terminals - Product standard
• SS-EN-2713-002 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 degrees C and 200 degrees C - Part 002: Screened and jacketed - General
• SS-EN-2713-003 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 degrees C and 200 degrees C - Part 003: Screened (spiral) and jacketed, ink jet printable - Product standard
• SS-EN-2713-004 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 oC and 200 oC - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard
• SS-EN-2713-005 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 degrees C and 200 degrees C - Part 005: Screened (spiral) and jacketed, CO2 laser printable - Product standard
• SS-EN-2713-006 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 oC and 200 oC - Part 006: Screened (braided) and jacketed, CO2 laser printable - Product standard
• SS-EN-2713-007 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 degrees C and 200 degrees C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard
• SS-EN-2713-008 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 oC and 200 oC - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard
• SS-EN-2713-009 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 degrees C and 200 degrees C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard
• SS-EN-2713-010 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 oC and 200 oC - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard
• SS-EN-2713-011 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 degrees C and 200 degrees C - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
• SS-EN-2713-012 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver-plated copper screened (spiral) and jacketed, UV laser printable - Product standard
• SS-EN-2714-002 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 002: Screened and jacketed - General
• SS-EN-2714-003 - Aerospace series - Cables. electrical, single and multicore for general purpose - Operating temperatures between - 55 degrees Celsius and 260 degrees Celsius - Part 003: Screened (spiral) and jacketed, ink jet printable - Product standard
• SS-EN-2714-004 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 oC and 260 oC - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard
• SS-EN-2714-005 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 degrees C and 260 degrees C - Part 005: Screened (spiral) and jacketed, CO2 laser printable - Product standard
• SS-EN-2714-006 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 oC and 260 oC - Part 006: Screened (braided) and jacketed, CO2 laser printable - Product standard
• SS-EN-2714-007 - Aerospace series - Cables. electrical, single and multicore for general purpose - Operating temperature between - 55 degrees Celsius and 260 degrees Celsius - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard
• SS-EN-2714-008 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 oC and 260 oC - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard
• SS-EN-2714-009 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 degrees Celsius and 260 degrees Celsius - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard
• SS-EN-2714-010 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 oC and 260 oC - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard
• SS-EN-2714-011 - Aerospace series - Cables. electrical, single and multicore for general purpose - Operating temperature between - 55 degrees Celsius and 260 degrees Celsius - Part 011: DM familiy, screened (spiral) and jacketed, UV laser printable - Product standard
• SS-EN-2714-012 - Aerospace series - Cables. electrical, single and multicore for general purpose - Operating temperature between - 55 degrees Celsius and 260 degrees Celsius - Part 012: DM familiy, screened (braided) and jacketed, UV laser printable - Product standard
• SS-EN-2714-013 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 013: DR family, screened (spiral) and jacketed, UV laser printable - Product standard
• SS-EN-2714-014 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 014: DR family, 4 to 11 cores, taped, screened (braided) and jacketed, UV laser printable - Product standard
• SS-EN-27526 - Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infrared absorption method after induction furnace combustion
• SS-EN-2756 - Aerospace series - Lamps, incandescent - Test methods
• SS-EN-2794-001 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification
• SS-EN-2794-003 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals - Product standard
• SS-EN-2794-004 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals - Product standard
• SS-EN-2812 - Aerospace series - Stripping of electric cables
• SS-EN-2853 - Aerospace series - Current ratings for electrical cables with conductor EN 2083
• SS-EN-2854-002 - Aerospace series - Cables, electrical for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General
• SS-EN-2854-003 - Aerospace series - Cables, electrical for general purpose - Operating temperatures between -55 °C and 260 °C - Part 003: Product standard
• SS-EN-2882 - Aerospace series - Nut, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
• SS-EN-2995-001 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification
• SS-EN-2995-004 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard
• SS-EN-2995-005 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard
• SS-EN-2996-001 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification
• SS-EN-2996-004 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard
• SS-EN-2996-005 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard
• SS-EN-2997-002 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of performance and contact arrangements
• SS-EN-2997-003 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 003: Square flange receptacle - Product standard
• SS-EN-2997-004 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 oC to 175 oC continuous, 200 oC continuous, 260 oC peak - Part 004: Jam-nut mounted receptacle - Product standard
• SS-EN-2997-005 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 005: Hermetic square flange receptacle - Product standard
• SS-EN-2997-006 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard
• SS-EN-2997-007 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 007: Hermetic receptacle with round flange attached by welding or brazing - Product standard
• SS-EN-2997-008 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 oC to 175 oC continuous, 200 oC continuous, 260 oC peak - Part 008: Plug - Product standard
• SS-EN-2997-009 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 009: Protective cover for receptacle - Product standard
• SS-EN-2997-010 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 010: Protective cover for plug - Product standard
• SS-EN-2997-011 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire resistant or non fire resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 011: Dummy receptacle - Product standard
• SS-EN-2997-012 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 degrees Celsius to 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 012: Jam-nut for jam-nut receptacles - Product standard
• SS-EN-2997-013 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 degrees Celsius to 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 013: O-ring seal for jam-nut receptacles - Product standard
• SS-EN-2997-014 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 014: Square flange receptacle with integrated accessory - Product standard
• SS-EN-2997-015 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 degrees Celcius to 175 degrees Celcius continuous, 200 degrees Celcius continuous, 260 degrees Celcius peak - Part 015: Jam-nut mounted receptacle with integrated accessory - Product standard
• SS-EN-2997-016 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 degrees Celcius to 175 degrees Celcius continuous, 200 degrees Celcius continuous, 260 degrees Celcius peak - Part 016: Plug with integrated accessory - Product standard
• SS-EN-2997-1 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 1: Technical
• SS-EN-2997-11 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 11: Dummy rec
• SS-EN-2997-2 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 2: Specificat
• SS-EN-2997-3 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 3: Square fla
• SS-EN-2997-4 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 4: Jam-nut mo
• SS-EN-2997-5 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 5: Hermetic s
• SS-EN-2997-6 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 6: Hermetic j
• SS-EN-2997-7 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 7: Hermetic r
• SS-EN-2997-8 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 8: Plug - Pro
• SS-EN-2997-9 - Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 degrees Celsius continuous, 200 degrees Celsius continuous, 260 degrees Celsius peak - Part 9: Protective
• SS-EN-3155-001 - Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification
• SS-EN-3155-002 - Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts
• SS-EN-3155-003 - Aerospace series - Electrical contacts used in elements of connection - Part 003: Contacts, electrical, female, type A, crimp, class S - Product standard
• SS-EN-3155-004 - Aerospace series - Electrical contacts used in elements of connection - Part 004: Contacts, electrical, male, type A, crimp, class T - Product standard
• SS-EN-3155-005 - Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard
• SS-EN-3155-008 - Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard
• SS-EN-3155-009 - Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
• SS-EN-3155-012 - Aerospace series - Electrical contacts used in elements of connection - Part 012: Contacts, electrical, triaxial, size 8, male, type D, solder, class R - Product standard
• SS-EN-3155-013 - Aerospace series - Electrical contacts used in elements of connection - Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R - Product standard
• SS-EN-3155-014 - Aerospace series - Electrical contacts used in elements of connection - Part 014: Contacts, electrical, male, type A, crimp, class S - Product standard
• SS-EN-3155-015 - Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard
• SS-EN-3155-016 - Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard
• SS-EN-3155-017 - Aerospace series - Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard
• SS-EN-3155-018 - Aerospace series - Electrical contacts used in elements of connection - Part 018: Contacts, electrical, male, type A, crimp, class S - Product standard
• SS-EN-3155-019 - Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard
• SS-EN-3155-022 - Aerospace series - Electrical contacts used in elements of connection - Part 022: Contacts, electrical rectangular, male, type A, crimp, class R - Product standard
• SS-EN-3155-023 - Aerospace series - Electrical contacts used in elements of connection - Part 023: Contacts, electrical rectangular, female, type A, crimp, class R - Product standard
• SS-EN-3155-024 - Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S - Product standard
• SS-EN-3155-025 - Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S - Product standard
• SS-EN-3155-026 - Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product standard
• SS-EN-3155-027 - Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product standard
• SS-EN-3155-028 - Aerospace series - Electrical contacts used in elements of connection - Part 028: Contacts, electrical, coaxial, shielded, size 16, male, type D, crimp, class R - Product standard
• SS-EN-3155-029 - Aerospace series - Electrical contacts used in elements of connection - Part 029: Contacts, electrical, coaxial, shielded, size 16, female, type D, crimp, class R - Product standard
• SS-EN-3155-030 - Aerospace series - Electrical contacts used in elements of connection - Part 030: Contacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R - Product standard
• SS-EN-3155-031 - Aerospace series - Electrical contacts used in elements of connection - Part 031: Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R - Product standard
• SS-EN-3155-032 - Aerospace series - Electrical contacts used in elements of connection - Part 032: Contacts, electrical, coaxial, 50 ohms, size 5, male, type D, crimp, class R - Product standard
• SS-EN-3155-033 - Aerospace series - Electrical contacts used in elements of connection - Part 033: Contacts, electrical, coaxial, 50 ohms, size 5, female, type D, crimp, class R - Product standard
• SS-EN-3155-034 - Aerospace series - Electrical contacts used in elements of connection - Part 034: Contacts, electrical, triaxial, size 08, male, type D, crimp, class R - Product standard
• SS-EN-3155-035 - Aerospace series - Electrical contacts used in elements of connection - Part 035: Contacts, electrical, triaxial, size 08, female, type D, crimp, class R— Product standard
• SS-EN-3155-039 - Aerospace series - Electrical contacts used in elements of connection - Part 039: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard
• SS-EN-3155-040 - Aerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard
• SS-EN-3155-041 - Aerospace series - Electrical contacts used in elements of connection - Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard
• SS-EN-3155-042 - Aerospace series - Electrical contacts used in elements of connection - Part 042: Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P - Product standard
• SS-EN-3155-043 - Aerospace series - Electrical contacts used in elements of connection - Part 043: Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P - Product standard
• SS-EN-3155-044 - Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard
• SS-EN-3155-045 - Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard
• SS-EN-3155-046 - Aerospace series - Electrical contacts used in elements of connection - Part 046: Contacts, electrical, male, type A, double crimping, class S - Product standard
• SS-EN-3155-047 - Aerospace series - Electrical contacts used in elements of connection - Part 047: Contacts, electrical, female, type A, double crimping, class S - Product standard
• SS-EN-3155-052 - Aerospace series - Electrical contacts used in elements of connection - Part 052: Contacts, electrical, male 052, type A, crimp, class S - Product standard
• SS-EN-3155-053 - Aerospace series - Electrical contacts used in elements of connection - Part 053: Contacts, electrical, female 053, type A, crimp, class S - Product standard
• SS-EN-3155-054 - Aerospace series - Electrical contacts used in elements of connection - Part 054: Contacts, electrical, male thermocouple NiAl, type C, crimp, class T - Product standard
• SS-EN-3155-055 - Aerospace series - Electrical contacts used in elements of connection - Part 055: Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T - Product standard
• SS-EN-3155-056 - Aerospace series - Electrical contacts used in elements of connection - Part 056: Contacts, electrical, male, thermocouple NiCr, type C, crimp, class T - Product standard
• SS-EN-3155-057 - Aerospace series - Electrical contacts used in elements of connection - Part 057: Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T - Product standard
• SS-EN-3155-058 - Aerospace series - Electrical contacts used in elements of connection - Part 058: Contacts, electrical, coaxial, size 16, male, type D, solder, class R - Products standard
• SS-EN-3155-059 - Aerospace series - Electrical contacts used in elements of connection - Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard
• SS-EN-3155-060 - Aerospace series - Electrical contacts used in elements of connection - Part 060: Contacts, electrical, coaxial, size 12, male, type D, solder, class R Product standard
• SS-EN-3155-061 - Aerospace series - Electrical contacts used in elements of connection - Part 061: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard
• SS-EN-3155-063 - Aerospace series - Electrical contacts used in elements of connection - Part 063: Contacts, electrical, coaxial, 50 ohms, size 1, male, type D, solder, class R - Product standard
• SS-EN-3155-064 - Aerospace series - Electrical contacts used in elements of connection - Part 064: Contacts, electrical, coaxial, 50 ohms, size 1, female, type D, solder, class R - Product standard
• SS-EN-3155-065 - Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard
• SS-EN-3155-066 - Aerospace series - Electrical contacts used in elements of connection - Part 066: Contacts, electrical, female, type A, crimp, class S, size 8 - Product standard
• SS-EN-3155-067 - Aerospace series - Electrical contacts used in elements of connection - Part 067: Contacts, electrical, coaxial, size 08, male, type D, solder, class R - Product standard
• SS-EN-3155-068 - Aerospace series - Electrical contacts used in elements of connection - Part 068: Contacts, electrical, coaxial, size 08, female, type D, solder, class R - Product standard
• SS-EN-3155-069 - Aerospace series - Electrical contacts used in elements of connection - Part 069: Contacts, electrical, coaxial, size 16, female, type D, solder, class P - Product standard
• SS-EN-3155-070 - Aerospace series - Electrical contacts used in elements of connection - Part 070: Contacts, electrical, male, type A, crimp, class S - Product standard
• SS-EN-3155-071 - Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard
• SS-EN-3155-074 - Aerospace series - Electrical contacts used in elements of connection - Part 074: Contacts, electrical, quadrax, size 8, male, type E, crimp, class R - Product standard
• SS-EN-3155-075 - Aerospace series - Electrical contacts used in elements of connection - Part 075: Contacts, electrical, quadrax, size 8, female, type E, crimp, class R - Product standard
• SS-EN-3155-076 - Aerospace series - Electrical contacts used in elements of connection - Part 076: Contacts, electrical, male, type A, crimp, class R - Product standard
• SS-EN-3155-077 - Aerospace series - Electrical contacts used in elements of connection - Part 077: Contacts, electrical, female, type A, crimp, class R - Product standard
• SS-EN-3155-078 - Aerospace series - Electrical contacts used in elements of connection - Part 078: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class S - Product standard
• SS-EN-3155-079 - Aerospace series - Electrical contacts used in elements of connection - Part 079: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S - Product standard
• SS-EN-3155-080 - Aerospace series - Electrical contacts used in elements of connection - Part 080: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T - Product standard
• SS-EN-3155-081 - Aerospace series - Electrical contacts used in elements of connection - Part 081: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class T - Product standard
• SS-EN-3155-082 - Aerospace series - Electrical contacts used in elements of connection - Part 082: Contacts, electrical, female, type A, crimp, class S - Product standard
• SS-EN-3155-083 - Aerospace series - Electrical contacts used in elements of connection - Part 083: Contact, electrical, female, type A, crimp, class S, size 8 - Product standard
• SS-EN-3197 - Aerospace series - Design and installation of aircraft electrical and optical interconnection systems
• SS-EN-3218-001 - Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 001: Technical specification
• SS-EN-3218-002 - Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements
• SS-EN-3218-005 - Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 005: Plug with non-removable size 22 solder contacts - Product standard
• SS-EN-3218-006 - Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard
• SS-EN-3218-007 - Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 007: Plug with rear-removable size 20 crimp contacts - Product standard
• SS-EN-3218-008 - Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 008: Receptacle with rear-removable size 20 crimp contacts - Product standard
• SS-EN-3218-009 - Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors - Product standard
• SS-EN-3218-010 - Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard
• SS-EN-3218-011 - Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors - Product standard
• SS-EN-3371 - Aerospace series - Electrical bonding - Technical specification
• SS-EN-3372-001 - Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperature - 65 degrees celsius to 175 degrees celsius or 200 degrees celsius continuous - Part 001: Technical specification
• SS-EN-3372-002 - Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 degrees celsius to 175 degrees celsius or 200 degrees celsius continuous - Part 002: Specification of performance and contact arrangements
• SS-EN-3372-003 - Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 degrees Celsius to 175 degrees Celsius or 200 degrees Celsius continuous - Part 003: Square flange receptacle - Product standard
• SS-EN-3372-005 - Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 degrees Celsius to 175 degrees Celsius or 200 degrees Celsius continuous - Part 005: Receptacle, hermetic, round flange, solder mounting - Product standard
• SS-EN-3372-006 - Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 degrees Celsius to 175 degrees Celsius or 200 degrees Celsius continuous - Part 006: Protective cover for receptacle - Product standard
• SS-EN-3372-007 - Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 degrees Celsius to 175 degrees Celsius or 200 degrees Celsius continuous - Part 007: Protective cover for plug - Product standard
• SS-EN-3372-008 - Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 degrees Celsius to 175 degrees Celsius or 200 degrees Celsius continuous - Part 008: Free plug with grounding spring - Product standard
• SS-EN-3372-009 - Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 degrees Celsius to 175 degrees Celsius or 200 degrees Celsius continuous - Part 009: Receptacle, jam nut mounting - Product standard
• SS-EN-3372-011 - Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 degrees Celsius to 175 degrees Celsius or 200 degrees Celsius continuous - Part 011: Dummy receptacle - Product standard
• SS-EN-3373-001 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 001: Technical specification
• SS-EN-3373-002 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002: General and list of product standard
• SS-EN-3373-007 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard
• SS-EN-3373-008 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C - Product standard
• SS-EN-3373-010 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 degrees Celsius for metric and inch stud series - Product standard
• SS-EN-3373-011 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 degrees Celsius for metric and inch stud series - Product standard
• SS-EN-3373-012 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 degrees C - Product standard
• SS-EN-3373-013 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260 degrees C - Product standard
• SS-EN-3373-014 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 014: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 degrees Celsius - Product standard
• SS-EN-3375-001 - Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification
• SS-EN-3375-002 - Aerospace series - Cable, electrical, for digital data transmission - Part 002: General
• SS-EN-3375-003 - Aerospace series - Cable, electrical, for digital data transmission - Part 003: Single braid - 77 Ohms - Type KG - Product standard
• SS-EN-3375-004 - Aerospace series - Cable, electrical, for digital data transmission - Part 004: Double braid - 77 Ohms - Type WJ - Product standard
• SS-EN-3375-005 - Aerospace series - Cable, electrical, for digital data transmission - Part 005: Double braid + metallic layer - 77 Ohms - Type WV - Product standard
• SS-EN-3375-006 - Aerospace series - Cable, electrical, for digital data transmission - Part 006: Single braid - 78 Ohms - Type XM - Product standard
• SS-EN-3375-007 - Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard
• SS-EN-3375-008 - Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 ohms - Type KD - Product standard
• SS-EN-3375-009 - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard
• SS-EN-3375-011 - Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Lightweight - Type KL - Product standard
• SS-EN-3375-012 - Aerospace series - Cable, electrical, for digital data transmission - Part 012: Single braid - Star Quad 100 ohms - 260 °C - Type KH - Product standard
• SS-EN-3475-100 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
• SS-EN-3475-201 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination
• SS-EN-3475-202 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass
• SS-EN-3475-203 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
• SS-EN-3475-301 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length
• SS-EN-3475-302 - Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test
• SS-EN-3475-303 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance
• SS-EN-3475-304 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface resistance
• SS-EN-3475-305 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305: Overload resistance
• SS-EN-3475-306 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors
• SS-EN-3475-307 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
• SS-EN-3475-401 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 401: Accelerated ageing
• SS-EN-3475-402 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402: Shrinkage and delamination
• SS-EN-3475-403 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking
• SS-EN-3475-404 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock
• SS-EN-3475-405 - Aerospace series Cables, electrical, aircraft use Test methods Part 405: Bending at ambient temperature
• SS-EN-3475-406 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test
• SS-EN-3475-407 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability
• SS-EN-3475-408 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance
• SS-EN-3475-409 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409: Air-excluded ageing
• SS-EN-3475-410 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance
• SS-EN-3475-411 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
• SS-EN-3475-412 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance
• SS-EN-3475-413 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413: Wrap back test
• SS-EN-3475-414 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
• SS-EN-3475-415 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature
• SS-EN-3475-416 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416:Thermal stability
• SS-EN-3475-417 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 417: Fire resistance of cables confined inside a harness
• SS-EN-3475-418 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors
• SS-EN-3475-501 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through
• SS-EN-3475-502 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502: Notch propagation
• SS-EN-3475-503 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion
• SS-EN-3475-504 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504: Torsion
• SS-EN-3475-505 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
• SS-EN-3475-506 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity
• SS-EN-3475-507 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating
• SS-EN-3475-508 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness
• SS-EN-3475-509 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509: Solderability
• SS-EN-3475-510 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material
• SS-EN-3475-511 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion
• SS-EN-3475-512 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance
• SS-EN-3475-513 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)
• SS-EN-3475-514 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
• SS-EN-3475-515 - Aerospace series - Cable, electrical, aircraft use - Test methods - Part 515: Crush resistance
• SS-EN-3475-601 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density
• SS-EN-3475-602 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity
• SS-EN-3475-603 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking
• SS-EN-3475-604 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604: Resistance to dry arc propagation
• SS-EN-3475-605 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605: Wet short circuit test
• SS-EN-3475-701 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor
• SS-EN-3475-702 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702: Screen pushback capability
• SS-EN-3475-703 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking
• SS-EN-3475-704 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility
• SS-EN-3475-705 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
• SS-EN-3475-706 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability
• SS-EN-3475-707 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 707: Stabilization of assembly
• SS-EN-3475-801 - Aerospace series - Cables, electrical, aircraft use -Test methods - Part 801: Capacitance per unit length
• SS-EN-3475-802 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance
• SS-EN-3475-803 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803: Capacitance variation
• SS-EN-3475-804 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 804: Velocity of propagation
• SS-EN-3475-805 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805: Characteristic impedance
• SS-EN-3475-806 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation
• SS-EN-3475-807 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 807: Transfer impedance
• SS-EN-3475-808 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 808: Cross-talk
• SS-EN-3475-809 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance
• SS-EN-3475-810 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 810: Structural return loss
• SS-EN-3475-811 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation
• SS-EN-3475-812 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 812: Return loss (VSWR)
• SS-EN-3545-001 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 degrees Celsius to 175 degrees Celsius - Part 001: Technical specification
• SS-EN-3545-002 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 degrees Celsius to 175 degrees Celsius - Part 002: Specification of performance and contact arrangements
• SS-EN-3545-003 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 oC to 175 oC - Part 003: Connectors with female contacts - Product standard
• SS-EN-3545-004 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 oC to 175 oC - Part 004: Connectors with male contacts - Product standard
• SS-EN-3545-005 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 005: Female coding and attachment System for mounting on free housing (plug) - Product standard
• SS-EN-3545-006 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 006: Male coding and attachment System for mounting on fixed housing (receptacle) - Product standard
• SS-EN-3545-007 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007: Cable clamp - Product standard
• SS-EN-3545-008 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 oC to 175 oC - Part 008: Tools for assembly/removal of coding and attachment system - Product standard
• SS-EN-3545-009 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 degrees Celsius to 175 degrees Celsius - Part 009: Protective cover for plug and receptacle - Product standard
• SS-EN-3567-001 - Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 001: Technical specification
• SS-EN-3567-003 - Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers - Product standard
• SS-EN-3567-004 - Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers - Product standard
• SS-EN-3645-001 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification
• SS-EN-3645-002 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements
• SS-EN-3645-003 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 003: Receptacle square flange mounting - Product standard
• SS-EN-3645-004 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, hermetic, square flange mounting - Product standard
• SS-EN-3645-005 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, solder mounting - Product standard
• SS-EN-3645-006 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Protective cover for receptacle - Product standard
• SS-EN-3645-007 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 007: Protective cover for plug - Product standard
• SS-EN-3645-008 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 °C or 200 °C continuous - Part 008: Non release plug with grounding ring - Product standard
• SS-EN-3645-009 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Receptacle, round flange, jam nut mounting - Product standard
• SS-EN-3645-010 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Receptacle, hermetic, round flange, jam nut mounting - Product standard
• SS-EN-3645-011 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 oC or 200 oC continuous - Part 011: Lanyard release plug with grounding fingers - Type 1 - Product standard
• SS-EN-3645-012 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 oC or 200 oC continuous - Part 012: Lanyard release plug with grounding fingers - Type 2 - Product standard
• SS-EN-3645-013 - Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 013: Dummy receptacle - Product standard
• SS-EN-3646-001 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification
• SS-EN-3646-002 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 oC to 200 oC continuous - Part 002: Specification of performance and contact arrangements
• SS-EN-3646-003 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 003: Receptacle, square flange mounting - Product standard
• SS-EN-3646-004 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard
• SS-EN-3646-005 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard
• SS-EN-3646-006 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard
• SS-EN-3646-007 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard
• SS-EN-3646-008 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 degrees Celsius or 200 degrees Celsius continuous - Part 008: Plug - Product standard
• SS-EN-3646-009 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Protective cover for receptacle - Product standard
• SS-EN-3646-010 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Protective cover for plug - Product standard
• SS-EN-3646-011 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 degrees Celsius or 200 degrees Celsius continuous - Part 011: Dummy receptacle - Product standard
• SS-EN-3660-001 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
• SS-EN-3660-002 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 002: Index of product standards
• SS-EN-3660-003 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A - Product standard
• SS-EN-3660-004 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief - Product standard
• SS-EN-3660-005 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief - Product standard
• SS-EN-3660-006 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 006: Cable outlet, self-locking, style C, straight, shielded (cone grounding), unsealed with clamp strain relief - Product standard
• SS-EN-3660-007 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 007: Cable outlet, self-locking, style C, 90 degrees, shielded (cone grounding), unsealed with clamp strain relief - Product standard
• SS-EN-3660-008 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 008: Cable outlet, self-locking, style C, 45 degrees, shielded (cone grounding), unsealed with clamp strain relief - Product standard
• SS-EN-3660-009 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 009: Cable outlet, style J, straight, sealed, for heat shrinkable boot - Product standard
• SS-EN-3660-010 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 010: Cable outlet, style K, straight, shielded, sealed, for heat shrinkable boot - Product standard
• SS-EN-3660-011 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 011: Cable outlet, style K, 90°, shielded, sealed, for heat shrinkable boot - Product standard
• SS-EN-3660-012 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 012: Grommet nut, style A for EN 3372 - Product standard
• SS-EN-3660-013 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 013: Cable outlet, style A, straight, unsealed, with cable tie strain relief - Product standard
• SS-EN-3660-014 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 014: Cable outlet, style A 90 degrees, unsealed, with cable tie strain relief - Product standard
• SS-EN-3660-015 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 015: Cable outlet, style A, 45 degrees, unsealed, with cable tie strain relief - Product standard
• SS-EN-3660-016 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 016: Grommet nut, style A, self-locking and non self-locking for EN 3645 - Product standard
• SS-EN-3660-017 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 017: Cable outlet, style A, straight, unsealed, with cable tie strain relief - Product standard
• SS-EN-3660-018 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 018: Cable outlet, style A, 90 degrees, unsealed, with cable tie strain relief - Product standard
• SS-EN-3660-019 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 019: Cable outlet, style A, 45 degrees, unsealed, with cable tie strain relief - Product standard
• SS-EN-3660-020 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 020: Cable outlet, style A, straight, unsealed, self-locking with clamp strain relief for EN 3645 - Product standard
• SS-EN-3660-021 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 021: Cable outlet, style A, 90 degrees, unsealed
• SS-EN-3660-022 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 022: Cable outlet, style A, straight, composite, unsealed, with cable tie strain relief - Product standard
• SS-EN-3660-023 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 023: Cable outlet, style A, 90 , composite, unsealed, with cable tie strain relief - Product standard
• SS-EN-3660-024 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 024: Grommet nut, style A, composite - Product standard
• SS-EN-3660-025 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard
• SS-EN-3660-026 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 026: Cable outlet, style A, 90 degree, unsealed, with cable tie strain relief for EN 3646 - Product standard
• SS-EN-3660-027 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 027: Cable outlet, style A, 45°, unsealed, with cable tie strain relief for EN 3646 - Product standard
• SS-EN-3660-031 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 031: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard
• SS-EN-3660-032 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 032: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard
• SS-EN-3660-034 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 034: Memory metal rings, style Z, for the attachment of screens - Product standard
• SS-EN-3660-035 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 035: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed - Product standard
• SS-EN-3660-036 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 036: spacer pad for cable outlet, style Z - Product standard
• SS-EN-3660-037 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 037: bushing strip, elastomer, for cable outlet, style Z - Product standard
• SS-EN-3660-038 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 038: Manual installation tool, style Z, for installation of stainless steel shield termination band EN 3660-033, to cable outlet accessories - Product standard
• SS-EN-3660-062 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 062: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self-locking - Product standard
• SS-EN-3660-063 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking - Product standard
• SS-EN-3660-064 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking - Product standard
• SS-EN-3660-065 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 065: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self-locking - Product standard
• SS-EN-3660-066 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 066: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed - Product standard
• SS-EN-3661-001 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification
• SS-EN-3661-005 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard
• SS-EN-3661-006 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus bar version - Product standard
• SS-EN-3662-001 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification
• SS-EN-3662-005 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard
• SS-EN-3662-006 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus-bar version - Product standard
• SS-EN-3682-001 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 001: Technical specification
• SS-EN-3682-002 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 002: Specification of performance and contact arrangements
• SS-EN-3682-003 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 003: Inserts - Product standard
• SS-EN-3682-004 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 004: Size 2 receptacle - Product standard
• SS-EN-3682-005 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 005: Size 2 plug - Product standard
• SS-EN-3682-006 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 006: Size 3 receptacle - Product standard
• SS-EN-3682-007 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 007: Size 3 plug - Product standard
• SS-EN-3682-008 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 008: Size 4 receptacle - Product standard
• SS-EN-3682-009 - Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 009: Size 4 plug - Product standard
• SS-EN-3708-001 - Aerospace series - Modular interconnection systems - Terminal junction systems - Part 001: Technical specification
• SS-EN-3708-002 - Aerospace series - Modular interconnection systems - Terminal junction systems - Part 002: Performance specification
• SS-EN-3708-003 - Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard
• SS-EN-3708-004 - Aerospace series - Modular interconnection systems - Terminal junction systems - Part 004: Removable feedback modules version, unsealed - Product standard
• SS-EN-3708-005 - Aerospace series - Modular interconnection systems - Terminal junction systems - Part 005: Frames with accessories for feedback modules version, sealed and unsealed - Product standard
• SS-EN-3716-001 - Aerospace series - Connector, single-way, with triaxial interface, for transmission of digital data - Part 001: Technical specification
• SS-EN-3716-002 - Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions of use and list of product standards
• SS-EN-3716-003 - Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard
• SS-EN-3716-004 - Aerospace series - Connectors, single-way with triaxial interface for transmission of digital data - Part 004: Solder plug and terminator - Product standard
• SS-EN-3716-005 - Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 005: Crimp receptacle - Product standard
• SS-EN-3716-006 - Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 006: Crimp plug - Product standard
• SS-EN-3719 - Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
• SS-EN-3733-001 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 degrees C continuous - Part 001: Technical specification
• SS-EN-3733-002 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 degrees Celsius continuous - Part 002: List of product standards
• SS-EN-3733-003 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 degrees Celsius continuous - Part 003: Plug connector for cable according to EN 4532, product standard
• SS-EN-3733-004 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 degrees Celsius continuous - Part 004: Receptacle, connector, four hole fixing cable according to EN 4532, product standard
• SS-EN-3733-005 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 degrees Celsius continuous - Part 005: Receptacle, connector, two hole fixing cable according to EN 4532, product standard
• SS-EN-3733-006 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 degrees Celsius continuous - Part 006: Receptacle, connector, jam nut fixing for cable according to EN 4532, product standard
• SS-EN-3733-007 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 degrees Celsius continuous - Part 007: Ferrule (optical contact) for EN 4532 (200 um/280 um fibre) - Product standard
• SS-EN-3733-008 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 oC continuous - Part 008: Plug sub-assembly for cable to EN 4532 (200 um/280 um fibre) - Product standard
• SS-EN-3733-009 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 oC continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200 um/280 um fibre) - Product standard
• SS-EN-3733-101 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 degrees Celsius continuous - Part 101: Protective cover receptacle - Product standard
• SS-EN-3733-103 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 degrees Celsius continuous - Part 103: Protective cover jam nut receptacle - Product standard
• SS-EN-3733-104 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 degrees Celsius continuous - Part 104: Receptacle connector dummy four holes fixing - Product standard
• SS-EN-3733-105 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 degrees Celsius continuous - Part 105: Receptacle connector dummy two holes fixing - Product standard
• SS-EN-3733-106 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 degrees Celsius continuous - Part 106: Receptacle connector dummy jam nut - Product standard
• SS-EN-3733-108 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 degrees Celsius continuous - Part 108: Cable support boot - Product standard
• SS-EN-3745-100 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General
• SS-EN-3745-201 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 201: Visual examination
• SS-EN-3745-202 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions
• SS-EN-3745-203 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 203: Cable dimensions
• SS-EN-3745-205 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 205: Cable longitudinal dimensional stability
• SS-EN-3745-301 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation
• SS-EN-3745-302 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 302: Numerical aperture
• SS-EN-3745-303 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 303: Bandwidth
• SS-EN-3745-305 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 305: Immunity to ambient light coupling
• SS-EN-3745-306 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling
• SS-EN-3745-401 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing
• SS-EN-3745-402 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling
• SS-EN-3745-404 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock
• SS-EN-3745-405 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
• SS-EN-3745-406 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test
• SS-EN-3745-407 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability
• SS-EN-3745-410 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life
• SS-EN-3745-411 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids
• SS-EN-3745-412 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
• SS-EN-3745-501 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test
• SS-EN-3745-502 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile stength for short length of optical fibres
• SS-EN-3745-503 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion
• SS-EN-3745-504 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504: Micro bending test
• SS-EN-3745-505 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength
• SS-EN-3745-506 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance
• SS-EN-3745-507 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 507: Cut-through
• SS-EN-3745-508 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 508: Torsion
• SS-EN-3745-509 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 509: Kink test
• SS-EN-3745-510 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test
• SS-EN-3745-511 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 511: Cable to cable abrasion
• SS-EN-3745-512 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance
• SS-EN-3745-513 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance
• SS-EN-3745-514 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend
• SS-EN-3745-515 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 515: Buffer insertion force
• SS-EN-3745-516 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516: Severe cable bend test
• SS-EN-3745-517 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test
• SS-EN-3745-601 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density
• SS-EN-3745-602 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: Toxicity
• SS-EN-3745-603 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 603: Nuclear radiation
• SS-EN-3745-701 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 701: Strippability
• SS-EN-3745-703 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking
• SS-EN-3745-705 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement
• SS-EN-3773-001 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification
• SS-EN-3773-003 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1 000 A max. - Part 003: Metric thread terminals - Product standard
• SS-EN-3773-004 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard
• SS-EN-3773-006 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 mm blade terminal - Product standard
• SS-EN-3774-001 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification
• SS-EN-3774-003 - Aerospace series - Circuit breakers three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 In - Part 003: Metric thread terminals - Product standard
• SS-EN-3774-004 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard
• SS-EN-3830 - Aerospace series - Electrical system - Load analysis
• SS-EN-3838 - Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
• SS-EN-3841-100 - Aerospace series - Circuit breakers - Test methods - Part 100: General
• SS-EN-3841-201 - Aerospace series - Circuit breakers - Test methods - Part 201: Visual inspection
• SS-EN-3841-202 - Aerospace series - Circuit breakers - Test methods - Part 202: Dimensions and masses
• SS-EN-3841-301 - Aerospace series - Circuit breakers - Test methods - Part 301: Voltage drop
• SS-EN-3841-302 - Aerospace series - Circuit breakers - Test methods - Part 302: Insulation resistance
• SS-EN-3841-303 - Aerospace series - Circuit breakers - Test methods - Part 303: Dielectric strength
• SS-EN-3841-304 - Aerospace series - Circuit breakers - Test methods - Part 304: Tripping points
• SS-EN-3841-305 - Aerospace series - Circuit breakers - Test methods - Part 305: Short-circuit performance
• SS-EN-3841-306 - Aerospace series - Circuit breakers - Test methods - Part 306: Service life
• SS-EN-3841-307 - Aerospace series - Circuit breakers - Test methods - Part 307: Performance with a locked tripping systems
• SS-EN-3841-308 - Aerospace series - Circuit breakers - Test methods - Part 308: Lightning
• SS-EN-3841-401 - Aerospace series - Circuit breakers - Test methods - Part 401: Sand and dust
• SS-EN-3841-402 - Aerospace series - Circuit breakers - Test methods - Part 402: Corrosion
• SS-EN-3841-403 - Aerospace series - Circuit breakers - Test methods - Part 403: Humidity
• SS-EN-3841-404 - Aerospace series - Circuit breakers - Test methods - Part 404: Explosion proofness
• SS-EN-3841-405 - Aerospace series - Circuit breakers - Test methods - Part 405: Fluid resistance
• SS-EN-3841-406 - Aerospace series - Circuit breakers - Test methods - Part 406: Flammability
• SS-EN-3841-407 - Aerospace series - Circuit breakers - Test methods - Part 407: Temperature variation
• SS-EN-3841-501 - Aerospace series - Circuit breakers - Test methods - Part 501: Actuator button travel
• SS-EN-3841-502 - Aerospace series - Circuit breakers - Test methods - Part 502: Operating forces
• SS-EN-3841-503 - Aerospace series - Circuit breakers - Test methods - Part 503: Strength of actuating components
• SS-EN-3841-504 - Aerospace series - Circuit breakers - Test methods - Part 504: Strength of mounting elements
• SS-EN-3841-505 - Aerospace series - Circuit breakers - Test methods - Part 505: Strength of main terminals
• SS-EN-3841-506 - Aerospace series - Circuit breakers - Test methods - Part 506: Vibration performance
• SS-EN-3841-507 - Aerospace series - Circuit breakers - Test methods - Part 507: Mechanical shocks
• SS-EN-3841-508 - Aerospace series - Circuit breakers - Test methods - Part 508: Centrifugal acceleration
• SS-EN-3841-509 - Aerospace series - Circuit breakers - Test methods - Part 509: Insertion and extraction forces of signal contact terminals
• SS-EN-3841-510 - Aerospace series - Circuit breakers - Test methods - Part 510: Strength of signal contact terminals
• SS-EN-3841-511 - Aerospace series - Circuit breakers - Test methods - Part 511: Combined test: temperature, altitude and vibration
• SS-EN-3909 - Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies
• SS-EN-4008-001 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 001: Technical specification
• SS-EN-4008-002 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 002: List of product standards
• SS-EN-4008-003 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 003: Positioner for crimping tool M22520/2-01 - Product standard
• SS-EN-4008-004 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 004: Die for crimping tool M22520/5-01 - Product standard
• SS-EN-4008-005 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 005: Positioner for crimping tool M22520/2-01 - Product standard
• SS-EN-4008-006 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 006: Positioner for crimping tool M22520/7 - Product standard
• SS-EN-4008-007 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard
• SS-EN-4008-008 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 008: Positioner for crimping tool M22520/7-01 - Product standard
• SS-EN-4008-011 - Aerospace series - Elements of electrical and optical connection - Crimping tools and assiciated accessories - Part 011: Positioner for crimping tool M22520/2-01 - Product standard
• SS-EN-4008-012 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 012: Positioner for crimping tool M22520/2-01 - Product standard
• SS-EN-4008-013 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 013: Positioner for crimping tool M22520/2-01 - Product standard
• SS-EN-4008-014 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 014: Turret for crimping tool M22520/31-01 - Product standard
• SS-EN-4008-015 - Aerospace series - Elements of electrical and optical connection - Crimping tool and associated accessories - Part 015: Positioner for crimping tool M22520/2-01 - Product standard
• SS-EN-4008-017 - Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 017: Head for crimping tool M22520/4-01 - Product standard
• SS-EN-4008-018 - Aerospace series - Elements of electrical and optical connection - Crimping tool and associated accessories - Part 018: Positioner for crimping tool M22520/2-01 - Product standard
• SS-EN-4049-001 - Aerospace series - Thermocouple extension cable - Operating temperatures between - 65 oC to 260 oC - Part 001: Technical specification
• SS-EN-4049-002 - Aerospace series - Thermocouple extension cable - Operating temperatures between - 65 oC to 260 oC - Part 002: General
• SS-EN-4049-003 - Aerospace series - Thermocouple extension cable - Operating temperatures between - 65 oC to 260 oC - Part 003: Single core nickel chromium/nickel aluminium - Product standard
• SS-EN-4049-004 - Aerospace series - Thermocouple extension cable - Operating temperatures between - 65 oC to 260 oC - Part 004: Two core nickel chromium/nickel aluminium shielded and jacketed - Product standard
• SS-EN-4056-001 - Aerospace series - Cable ties for harnesses - Part 001: Technical specification
• SS-EN-4056-002 - Aerospace series - Cable ties for harnesses - Part 002: Index of product standards
• SS-EN-4056-003 - Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures - 65 °C to 105 °C and - 65 °C to 150 °C - Product standard
• SS-EN-4056-004 - Aerospace series - Cable ties for harnesses - Part 004: Plastic cable ties - For operating temperatures - 55 °C to 105 °C and - 55 °C to 150 °C - Product standard
• SS-EN-4056-006 - Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - For operating temperatures -55 °C to 240 °C - Product standard
• SS-EN-4057-100 - Aerospace series - Cable ties for harnesses - Test methods - Part 100: General
• SS-EN-4057-201 - Aerospace series - Cable ties for harnesses - Test methods - Part 201: Visual examination
• SS-EN-4057-202 - Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions
• SS-EN-4057-301 - Aerospace series - Cable ties for harnesses - Test methods - Part 301: Salt mist test
• SS-EN-4057-302 - Aerospace series - Cable ties for harnesses - Test methods - Part 302: Flammability
• SS-EN-4057-303 - Aerospace series - Cable ties for harnesses - Test methods - Part 303: Resistance to fluids
• SS-EN-4057-304 - Aerospace series - Cable ties for harnesses - Test methods - Part 304: Loop tensile strength at maximum working temperature
• SS-EN-4057-305 - Aerospace series - Cable ties for harnesses - Test methods - Part 305: Colour fastness
• SS-EN-4057-306 - Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test
• SS-EN-4057-307 - Aerospace series - Cable ties for harnesses - Test methods - Part 307: Resistance to ultra violet radiation
• SS-EN-4057-401 - Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength
• SS-EN-4057-402 - Aerospace series - Cable ties for harnesses - Test methods - Part 402: Life cycle
• SS-EN-4057-404 - Aerospace series - Cable ties for harnesses - Test methods - Part 404: Low temperature installation
• SS-EN-4057-405 - Aerospace series - Cable ties for harnesses - Test methods - Part 405: Compass safe distance
• SS-EN-4057-406 - Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking device retention
• SS-EN-4057-407 - Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings
• SS-EN-4113 - Aerospace series - Clamps, loop (''P'' type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
• SS-EN-4114 - Aerospace series - Clamps, loop (''P'' type) in aluminium alloy with rubber cushioning - Dimensions, masses
• SS-EN-4115 - Aerospace series - Cushion, rubber for clamps - Dimensions, masses
• SS-EN-4165-001 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 001: Technical specification
• SS-EN-4165-002 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 002: Specification of performance and contact arrangements
• SS-EN-4165-003 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard
• SS-EN-4165-004 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 degrees Celsius continuous - Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 - Product standard
• SS-EN-4165-005 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 degrees Celsius continuous - Part 005: Stackable mounting receptacle 2 and 4 modules, series 3 - Product standard
• SS-EN-4165-006 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 degrees Celsius continuous - Part 006: Plug for 2 and 4 modules, series 2 - Product standard
• SS-EN-4165-007 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 degrees Celsius continuous - Part 007: Plug for 2 and 4 modules, series 3 - Product standard
• SS-EN-4165-008 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 degrees Celsius continuous - Part 008: Rack and panel plug for 2 and 4 modules, series 2 - Product standard
• SS-EN-4165-009 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 degrees Celsius coninuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard
• SS-EN-4165-010 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 degrees Celsius continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 - Product standard
• SS-EN-4165-011 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 degrees Celsius continuous - Part 011: Flange mounting receptacle 2 and 4 modules, series 2 - Product standard
• SS-EN-4165-012 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series - 3 - Product standard
• SS-EN-4165-013 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard
• SS-EN-4165-014 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and 3 - Product standard
• SS-EN-4165-015 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 015: Round chimney for accessory (1 per module cavity), 2 and 4 modules - Product standard
• SS-EN-4165-016 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 016: Double oval chimney for accessory (1 per 2 modules) - Product standard
• SS-EN-4165-017 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 017: Blank chimney for accessory (1 per module cavity) - Product standard
• SS-EN-4165-018 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 018: Protective cover for all receptacles series 2 - Product standard
• SS-EN-4165-020 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 degrees Celsius continuous - Part 020: Coupling system keyway for receptacle - Product standard
• SS-EN-4165-021 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 degrees Celsius continuous - Part 021: Coupling system keyway for plug - Product standard
• SS-EN-4165-022 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard
• SS-EN-4165-023 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 degrees Celsius continuous - Part 023: Tooling for assembly of receptacle coding componet - Product standard
• SS-EN-4165-024 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 024: Single module plug - Product standard
• SS-EN-4165-025 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 025: Single module receptacle - Product standard
• SS-EN-4165-026 - Aerospace series - Connector, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 026: Accessories for single module connector - Product standard
• SS-EN-4165-027 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 - Product standard
• SS-EN-4199-001 - Aerospace series - Bonding straps for aircraft - Part 001: Technical specification
• SS-EN-4199-002 - Aerospace series - Bonding straps for aircraft - Part 002: Index of product standard
• SS-EN-4199-003 - Aerospace series - Bonding straps for aircraft - Part 003: Bonding strap assemblies with flat braided conductor copper, tin plated - 65 °C up to 150 °C and copper, nickel plated - 65 °C up to 260 °C - Product standard
• SS-EN-4199-004 - Aerospace series - Bonding straps for aircraft - Part 004: Round bonding straps, copper, tin plated -65 °C up to 150 °C and nickel plated -65 °C up to 260 °C - Product Standard
• SS-EN-4199-005 - Aerospace series - Bonding straps for aircraft - Part 005: Flat braid conductors copper, tin plated -65 degrees Celsius up to 150 degrees Celsius and copper, nickel plated, -65 degrees Celsius up to 260 degrees Celsius - Product standard
• SS-EN-4199-006 - Aerospace series - Bonding straps for aircraft - Part 006: Round braid copper conductors for bonding straps, tin plated up to 150 oC or nickel plated up to 260 oC - Product standard
• SS-EN-4529-001 - Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 001: Technical specification
• SS-EN-4529-002 - Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 2: Index of product standards
• SS-EN-4529-003 - Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard
• SS-EN-4530-001 - Aerospace series - Sealing sleeves used in elements of connection - Part 001: Technical specification
• SS-EN-4530-002 - Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves
• SS-EN-4530-005 - Aerospace series - Sealing sleeves used in elements of connection - Part 005: Sealing sleeves for external diameter cable 3 mm to 4,1 mm - Product standard
• SS-EN-4530-006 - Aerospace series - Sealing sleeves used in elements of connection - Part 006: Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm - Product standard
• SS-EN-4531-001 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 001: Technical specification
• SS-EN-4531-002 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements
• SS-EN-4531-003 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 003: Square flange receptacle - Product standard
• SS-EN-4531-004 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 004: Jam nut receptacle - Product standard
• SS-EN-4531-005 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 005: Plug - Product standard
• SS-EN-4531-101 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641 multimode cable -55 °C to 125 °C - Product standard
• SS-EN-4531-901 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 901: Filler plugs - Product standard
• SS-EN-4532 - Aerospace series - Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket - Technical specification
• SS-EN-4533-001 - Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools
• SS-EN-4533-002 - Aerospace series - Fibre optic systems - Handbook - Part 002: Test and measurement
• SS-EN-4533-003 - Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installation practices
• SS-EN-4533-004 - Aerospace series - Fibre optic systems - Handbook - Part 004: Repair, maintenance, cleaning and inspection
• SS-EN-4604-001 - Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification
• SS-EN-4604-002 - Aerospace series - Cable, electrical, for signal transmission - Part 002: General
• SS-EN-4604-003 - Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 ohms, 200 °C, type WZ - Product standard
• SS-EN-4604-004 - Aerospace series - Cable, electrical, for signal transmission - Part 004: Cable, microcoaxial, high immunity, 50 Ohms, 200 degrees Celsius, type WS - Product standard
• SS-EN-4604-005 - Aerospace series - Cable, electrical, for signal transmission - Part 005: Cable, coaxial, 75 ohmx, 200 °C, type WL - Product standard
• SS-EN-4604-006 - Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 ohms, 200 °C, type WM - Product standard
• SS-EN-4604-007 - Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 ohms, 200 °C, type WN - Product standard
• SS-EN-4604-008 - Aerospace series - Cable, electrical, for signal transmission - Part 008: Cable, coaxial, 50 ohms, 200 degrees Celsius., Type WD - Product standard
• SS-EN-4604-009 - Aerospace series - Cable, electrical, for signal transmission - Part 009: Cable, coaxial, light weight, 50 ohms, 180 °C, type KW (light WN) - Product standard
• SS-EN-4604-010 - Aerospace series - Cable, electrical, for signal transmission - Part 010 : Cable, coaxial, light weight, 50 Ohms, 200 °C, type KX (light WD) - Product standard
• SS-EN-4608-001 - Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 °C and 260 °C - Part 001: Technical specification
• SS-EN-4608-002 - Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 oC and 260 oC - Part 002: General
• SS-EN-4608-003 - Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 °C and 260 °C - Part 003: DN family - Lightweight - UV Laser printable - Product standard
• SS-EN-4608-004 - Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 °C and 260 °C - Part 004: DW family - Lightweight - UV Laser printable - Product standard
• SS-EN-4608-005 - Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 °C and 260 °C - Part 005: DW family - Lightweight two-core gauge 24 for data transmission - UV laser printable - Product standard
• SS-EN-4611-002 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 002: General
• SS-EN-4611-003 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 003: Tin plated copper - Operating temperatures, between -65 °C and 135 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard
• SS-EN-4611-004 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard
• SS-EN-4611-005 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper - Operating temperatures between - 65 °C and 150 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard
• SS-EN-4611-006 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard
• SS-EN-4611-007 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 007: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard
• SS-EN-4611-008 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
• SS-EN-4611-009 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 009: BJ - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
• SS-EN-4612-002 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 002: Genera
• SS-EN-4612-003 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 003: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• SS-EN-4612-004 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
• SS-EN-4612-005 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• SS-EN-4612-006 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 006: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
• SS-EN-4612-007 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 007: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• SS-EN-4612-008 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
• SS-EN-4612-009 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 009: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• SS-EN-4612-010 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 010: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
• SS-EN-4612-011 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 011: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• SS-EN-4612-012 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 012: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
• SS-EN-4612-013 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 013: SX, TC and UC - Nickel plated copper - Operating temperatures, between - 65 degrees Celsius and 150 degrees Celsius - Single extruded wall for equipment only, with jacket and screen (spiral) - UV laser printable - Product standard
• SS-EN-4626-001 - Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 degrees Celsius to 125 degrees Celsius (cable dependent) - Flush contacts - Part 001: Technical specification
• SS-EN-4626-002 - Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 degrees Celsius to 125 degrees Celsius (cable dependent) - Flush contacts - Part 002: Specification of peformance and contact arrangements
• SS-EN-4626-003 - Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 degrees Celsius to 125 degrees Celsius (cable dependent) - Flush contacts - Part 003: Adaptor for plug
• SS-EN-4626-004 - Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 degrees Celsius to 125 degrees Celsius (cable dependent) - Flush contacts - Part 004: Adaptor for receptacle
• SS-EN-4626-101 - Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 degrees Celsius to 125 degrees Celsius (cable dependent) - Flush contacts - Part 101: Optical contact (sub-assembly) for plug - Product standard
• SS-EN-4639-001 - Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification
• SS-EN-4639-002 - Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 002: List of product standards
• SS-EN-4639-003 - Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 003: Male optical module - Product standard
• SS-EN-4639-004 - Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 004: Female optical module - Product standard
• SS-EN-4639-005 - Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 005: Removable alignment sleeve holder - Product standard
• SS-EN-4639-101 - Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between - 65 degrees Celsius and 125 degrees Celsius - Product standard
• SS-EN-4639-102 - Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 102: Optical contact for cable EN 4641-102 - Operating temperatures between - 55 degrees Celsius and 100 degrees Celsius - Product standard
• SS-EN-4640-001 - Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification
• SS-EN-4640-002 - Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 002: List of product standards
• SS-EN-4640-003 - Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 003: Plug optical connector - Product standard
• SS-EN-4640-004 - Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 004: Receptacle optical connector - Product standard
• SS-EN-4641-001 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification
• SS-EN-4641-100 - Aerospace series - Cables, optical 125 µm diameter cladding - Part 100: Tight structure 62,5/125 µm core GI fibre 1,8 mm outside diameter - Product standard
• SS-EN-4641-102 - Aerospace series - Cables, optical 125 µm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard
• SS-EN-4641-104 - Aerospace series - Cables, optical 125 µm diameter cladding - Part 104: Semi-loose, ruggedized duplex construction 62,5/125 µm GI fibre nominal, 4,95 mm outside diameter - Product standard
• SS-EN-4641-301 - Aerospace series - Cables, optical 125 µm diameter cladding - Part 301: Tight structure 50/125 µm GI, fibre nominal 1,8 mm, outside diameter - Product standard
• SS-EN-4644-001 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 001: Technical specification
• SS-EN-4644-002 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements
• SS-EN-4644-003 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 003: Rectangular inserts - Product standard
• SS-EN-4644-011 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 011: Plug, size 1, without mounting holes, class A, C and E - Product standard
• SS-EN-4644-012 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 012: Receptacle, size 1, class A, C and E - Product standard
• SS-EN-4644-013 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 013: Plug, size 1, with ground block, without mounting holes, class B and F - Product standard
• SS-EN-4644-014 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 014: Receptacle, size 1, with ground block, class B and F - Product standard
• SS-EN-4644-021 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 021: Plug, size 2, without mounting holes, class A, C and E - Product standard
• SS-EN-4644-022 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 022: Plug, size 2, with mounting holes, class A, C and E - Product standard
• SS-EN-4644-023 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 023: Plug, size 2, with ground block, class B and F - Product standard
• SS-EN-4644-024 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 024: Receptacle size 2, class A, C and E - Product standard
• SS-EN-4644-025 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 025: Receptacle, size 2, with flange, class A, C and E - Product standard
• SS-EN-4644-026 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 026: Receptacle size 2 with ground block, class B and F - Product standard
• SS-EN-4644-131 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 131: Size 3 plug for rack and panel applications, class C and D - Product standard
• SS-EN-4644-133 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 133: Size 3 receptacle for rack and panel application, class C and D - Product Standard
• SS-EN-4644-141 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 141: Size 4 plug for rack and panel applications, class C and D - Product standard
• SS-EN-4644-142 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 142: Size 4 receptacle for rack and panel application, class C and D - Product standard
• SS-EN-4644-201 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 201: Locking and polarizing hardware - Product standard
• SS-EN-4645-002 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 002: Specification of performance and contact arrangements
• SS-EN-4645-003 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 003: Square flange receptacle - Product standard
• SS-EN-4645-004 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 004: Jam nut receptacle - Product standard
• SS-EN-4645-005 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 005: Plug - Product standard
• SS-EN-4650 - Aerospace series - Wire and cable marking process, UV Laser
• SS-EN-4651 - Aerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard
• SS-EN-4652-001 - Aerospace series - Connectors, coaxial, radio frequency - Part 001: Technical specification
• SS-EN-4652-002 - Aerospace series - Connectors, coaxial, radiofrequency - Part 002: Specification of performances
• SS-EN-4652-110 - Aerospace series - Connectors, coaxial, radio frequency - Part 110: Type 1, BNC interface - Clamp nut assembly version - Straight plug - Product standard
• SS-EN-4652-111 - Aerospace series - Connectors, coaxial, radio frequency - Part 111: Type 1, BNC interface - Clamp nut assembly version - Right angle plug - Product standard
• SS-EN-4652-112 - Aerospace series - Connectors, coaxial, radio frequency - Part 112: Type 1, BNC interface - Clamp nut assembly version - Square flange receptacle - Product standard
• SS-EN-4652-113 - Aerospace series - Connectors, coaxial, radio frequency - Part 113: Type 1, BNC interface - Clamp nut assembly version - Bulkhead receptacle - Product standard
• SS-EN-4652-210 - Aerospace series - Connectors, coaxial, radio frequency - Part 210: Type 2, TNC interface - Clamp nut assembly version - Straight plug - Product standard
• SS-EN-4652-211 - Aerospace series - Connectors, coaxial, radio frequency - Part 211: Type 2, TNC interface - Clamp nut assembly version - Right angle plug - Product standard
• SS-EN-4652-212 - Aerospace series - Connectors, coaxial, radio frequency - Part 212: Type 2, TNC interface - Clamp nut assembly version - Square flange receptacle - Product standard
• SS-EN-4652-213 - Aerospace series - Connectors, coaxial, radio frequency - Part 213: Type 2, TNC interface - Clamp nut assembly version - Bulkhead receptacle - Product standard
• SS-EN-4652-220 - Aerospace series - Connectors, coaxial, radio frequency - Part 220: Type 2, TNC interface - Crimp version - Straight plug - Product standard
• SS-EN-4652-221 - Aerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard
• SS-EN-4652-222 - Aerospace series - Connectors, coaxial, radio frequency - Part 222: Type 2, TNC interface - Crimp version - Square flange receptacle - Product standard
• SS-EN-4652-310 - Aerospace series - Connectors, coaxial, radio frequency - Part 310: Type 3, N interface - Clamp nut assembly version - Straight plug - Product standard
• SS-EN-4652-311 - Aerospace series - Connectors, coaxial, radio frequency - Part 311: Type 3, N interface - Clamp nut assembly version - Right angle plug - Product standard
• SS-EN-4652-312 - Aerospace series - Connectors, coaxial, radio frequency - Part 312: Type 3, N interface - Clamp nut assembly version - Square flange receptacle - Product standard
• SS-EN-4652-313 - Aerospace series - Connectors, coaxial, radio frequency - Part 313: Type 3, N interface - Clamp nut assembly version - Bulkhead receptacle - Product standard
• SS-EN-4652-320 - Aerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard
• SS-EN-4652-321 - Aerospace series - Connectors, coaxial, radio frequency - Part 321: Type 3, N interface - Crimp assembly version - Right angle plug - Product standard
• SS-EN-4652-322 - Aerospace series - Connectors, coaxial, radio frequency - Part 322: Type 3, N interface - Crimp version - Square flange receptacle - Product standard
• SS-EN-4652-410 - Aerospace series - Connectors, coaxial, radio frequency - Part 410: Type 4, C interface - Clamp nut assembly version - Straight plug - Product standard
• SS-EN-4652-411 - Aerospace series - Connectors, coaxial, radio frequency - Part 411: Type 4, C interface - Clamp nut assembly version - Right angle plug - Product standard
• SS-EN-4652-412 - Aerospace series - Connectors, coaxial, radio frequency - Part 412: Type 4, C interface - Clamp nut assembly version - Square flange receptacle - Product standard
• SS-EN-4652-413 - Aerospace series - Connectors, coaxial, radio frequency - Part 413: Type 4, C interface - Clamp nut assembly version - Bulkhead receptacle - Product standard
• SS-EN-4652-420 - Aerospace series - Connectors, coaxial, radio frequency - Part 420: Type 4, C interface - Crimp assembly version - Straight plug - Product standard
• SS-EN-4652-421 - Aerospace series - Connectors, coaxial, radio frequency - Part 421: Type 4, C interface - Crimp assembly version - Right angle plug - Product standard
• SS-EN-4674-001 - Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001: Technical specification
• SS-EN-4674-002 - Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 002: General and list of product standard
• SS-EN-4674-003 - Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 003: Open sleeve - Inside pressurized area - EMI protection 5 kA - Temperature range - 65 °C to 200 °C - Product standard
• SS-EN-4674-004 - Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 004: Open sleeve - Outside pressurized area - EMI protection 10 kA - Temperature range - 65 °C to 200 °C - Product standard
• SS-EN-4681-001 - Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 001: Technical specification
• SS-EN-4681-002 - Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 002: General
• SS-EN-4681-005 - Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 005: AZ family, single, for use in low pressure atmosphere - Product standard
• SS-EN-4681-006 - Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 006: AZA family, single and multicore assembly, for use in low pressure atmosphere - Product standard
• SS-EN-4700-001 - Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip
• SS-EN-4700-003 - Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube
• SS-EN-4700-005 - Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock
• SS-EN-4701-001 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 001: Technical specification
• SS-EN-4703 - Aerospace series - Test specification for verification of the permeability of electrical insulation
• SS-EN-4708-101 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 101: Polyolefin sleeving - Operating temperatures -55 °C to 135 °C - Product standard
• SS-EN-4708-102 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 102: Very flexible polymer - Operating temperature - 75 °C to 150 °C - Product standard
• SS-EN-4708-103 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 103: Fluoroelastomer sleeves - Operating temperature -55 °C to 200 °C - Product standard
• SS-EN-4708-104 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 104: Semi-rigid polyvinylidene fluoride (PDVF) - Operating temperature - 55 °C to 175 °C - Product Standard
• SS-EN-4708-105 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 105: Semi-flexible polyvinylidene fluoride (PVDF) - Temperature range - 55 °C to 150 °C - Product standard
• SS-EN-4708-106 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 106: Limited fire hazard sleeving - Operating temperatures - 30 °C to 105 °C - Product standard
• SS-EN-4708-107 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 107: Polytetrafluoroethylene (PTFE) - Operating temperatures - 65 °C to 260 °C - Product standard
• SS-EN-4708-108 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 108: Limited fire hazard sleeving - Operating temperatures - 65 °C to 150 °C - Product standard
• SS-EN-4708-201 - Aerospace series - Sleeves, heat-shrinkable, for binding, insulation and identification - Part 201: Polyolefin identification sleeves - Operating Temperature range -55 °C to 135 °C - Product standard
• SS-EN-4708-203 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 203: polyvinylidene fluoride (PVDF) Identification sleeves - Operating Temperature range -55ºC to 225ºC - Product Standard
• SS-EN-4708-301 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 301: Adhesive lined polyolefin sleevings - Operating temperature - 55 °C to 105 °C - Product Standard
• SS-EN-4728 - Aerospace series - Circuit breakers, single and three poles dummies - Product standard
• SS-EN-4830-003 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 003: Module - Product standard
• SS-EN-4830-004 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 004: Extraction tool - Product standard
• SS-EN-4838-001 - Aerospace series - Arc Fault Circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz Constant Frequency - Part 001: Technical specification
• SS-EN-4838-004 - Aerospace series - Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency - Part 004: With signal contact - Product standard
• SS-EN-4838-005 - Aerospace series - Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz Constant Frequency - Part 005: With polarized signal contact - Product standard
• SS-EN-4839-001 - Aerospace series - Arc fault circuit breakers, three-poles, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency - Part 001: Technical specification
• SS-EN-4839-003 - Aerospace series - Arc Fault Circuit breakers, three-pole, temperature compensated, rated currents 3 A to 25 A, 115/200 V a.c. 400 Hz constant frequency - Part 003: Without auxiliary contacts - Product standard
• SS-EN-4840-001 - Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification
• SS-EN-4840-101 - Aerospace series - Heat shrinkable moulded shapes - Part 101: Polyolefin, semi-rigid, limited fire hazard - Temperature range - 30 °C to 105 °C - Product standard
• SS-EN-4840-102 - Aerospace series - Heat shrinkable moulded shapes - Part 102: Elastomeric, semi-rigid, temperature range -75 to 150 °C - Product Standard
• SS-EN-6049-001 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification
• SS-EN-6049-002 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 002: General and list of product standards
• SS-EN-6049-003 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard
• SS-EN-6049-004 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 004: Braided, tubular, high expandable - Product standard
• SS-EN-6049-005 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard
• SS-EN-6049-006 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard
• SS-EN-6049-007 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping protective sleeve, flexible post installation operating temperature from - 55 °C to 260 °C - Product standard
• SS-EN-6049-008 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C - Product standard
• SS-EN-6049-009 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 °C to 260 °C - Product standard
• SS-EN-6059-100 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General
• SS-EN-6059-202 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 202: Dimensions and mass
• SS-EN-6059-301 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 301: Sun light exposure
• SS-EN-6059-302 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 302: High temperature exposure
• SS-EN-6059-303 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids
• SS-EN-6059-304 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 304: Flammability
• SS-EN-6059-305 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 305: Fluid absorption
• SS-EN-6059-308 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 308: Rapid change of temperature
• SS-EN-6059-309 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 309: Fire resistance when fitted on a cable bundle
• SS-EN-6059-401 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 401: Expansion range
• SS-EN-6059-402 - Aerospace Series - Electrical cables, installation - Protection sleeves - Test methods - Part 402: Bending properties
• SS-EN-6059-406 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 406: Vibration
• SS-EN-6059-407 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 407: Mark adherence and print permanence
• SS-EN-6059-501 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test
• SS-EN-6059-502 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs
• SS-EN-6059-503 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 503: Temperature rise due to rated current injected on the sleeve
• SS-EN-6059-504 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 504: Temperature rise within a loom due to self-heating when protected by a sleeve
• SS-EN-6059-601 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 601: Open and close
• SS-EN-6093 - Aerospace series - Receptacle, floating, single lug
• SS-EN-6113 - Aerospace series - Circuit breaker, connecting and attachment hardware
• SS-ISO-2315 - Aircraft - Two- and four-pole sealed electromagnetic relays, 2 A and 3 A - Clearance and fixing dimensions
• SS-ISO-2635 - Aircraft - Conductors for general purpose aircraft electrical cables and aerospace applications - Dimensions and characteristics
• SS-ISO-461-1 - Aircraft - Connectors for ground electrical supplies - Part 1: Design, performance and test requirements (ISO 461-1:2003, IDT)
• SS-ISO-461-2 - Aircraft - Connectors for ground electrical supplies - Part 2: Dimensions
• SS-ISO-5066-1 - Aircraft - Hermetically sealed monostable electrical relays, 2A and 3A - Part 1: Operating characteristics and test conditions
• SS-ISO-5066-2 - Aircraft - Hermetically sealed monostable electrical relays, 2A and 3A - Part 2: Type approval tests
• SS-ISO-5866 - Aircraft - 2 and 3A plug-in base change over relays, Type II, with crimped connections - Clearance and fixing dimensions
• SS-ISO-6858 - Aircraft - Ground support electrical supplies - General requirements
• SS-ISO-8056-1 - Aircraft - Nickel-chromium and nickel-aluminium thermocouple extension cables - Part 1: Conductors - General requirements and tests
• SS-ISO-8668-1 - Aircraft - Terminal junction systems - Part 1: Characteristics
• SS-ISO-8668-2 - Aircraft - Terminal junction systems - Part 2: Tests