Document Center List of Standards on It Applications In Industry Including Design Automation
ICS Code 35.240.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-52915 - Specification for additive manufacturing file format (AMF) Version 1.2
- ASTM-52921 - Standard Terminology for Additive Manufacturing-Coordinate Systems and Test Methodologies
- ASTM-C1558 - Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
- ASTM-D380 - Standard Test Methods for Rubber Hose
- ASTM-D3902 - Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
- ASTM-D4237 - Test Method for Rubber Hose Used for Steam Applications (Withdrawn 1997)
- ASTM-D4604 - Standard Test Methods for Measurement of Cotton Fibers by High Volume Instruments (HVI) (Motion Control Fiber Information System) (Withdrawn 2001)
- ASTM-D4605 - Test Method for Measurement of Cotton Fibers by High Volume Instruments (HVI) - (Special Instruments Laboratory System) (Withdrawn 1995)
- ASTM-D622 - Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
- ASTM-D6672 - Standard Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines (Withdrawn 2017)
- ASTM-D6673 - Standard Practice for Sewn Products Pattern Data Interchange-Data Format (Withdrawn 2019)
- ASTM-D8053 - Standard Guide for Data Management and Reporting Associated with Oil and Gas Development Involving Hydraulic Fracturing
- ASTM-E1018 - Standard Guide for Application of ASTM Evaluated Cross Section Data File
- ASTM-E1434 - Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases (Withdrawn 2015)
- ASTM-E1723 - Guide for Recommended Formats for Data Records Used in Computerization of Test Data for Plastics (Withdrawn 2000)
- ASTM-F2446 - Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
- ASTM-F2915 - Standard Specification for Additive Manufacturing File Format (AMF) Version 1.2
- ASTM-F2921 - Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies (Withdrawn 2013)
- ASTM-G107 - Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
BSI:
- BS-5192-6 - Guide to production control
- BS-6078 - Guide to the application of digital computers to nuclear reactor instrumentation and control
- BS-7986 - Data quality metrics for industrial measurement and control systems. Specification
- BS-EN-29506-2 - Industrial Automation Systems, Manufacturing Message Specification, Protocol Specifica
- BS-EN-50325-2 - Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces
- BS-EN-50325-3 - Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. Smart distributed systems (SDS)
- BS-EN-50325-5 - Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces
- BS-EN-60870-5-1 - Telecontrol equipment and systems. Transmission protocols
- BS-EN-60987-TC - Tracked Changes. Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
- BS-EN-61003-1 - Industrial-process control systems. Instruments with analogue inputs and two- or multi-position outputs
- BS-EN-61003-1-TC - Tracked Changes. Industrial-process control systems. Instruments with analogue inputs and two- or multi-position outputs
- BS-EN-61069-3 - Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-3-TC - Tracked Changes. Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61069-4 - Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment
- BS-EN-61131-2 - Programmable controllers
- BS-EN-61131-3 - Programmable controllers
- BS-EN-61131-5 - Programmable controllers
- BS-EN-61131-6 - Programmable controllers
- BS-EN-61131-7 - Programmable controllers
- BS-EN-61131-9 - Programmable controllers
- BS-EN-61158-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3 - Digital data communications for measurement and control. Fieldbus for use in industrial control systems
- BS-EN-61158-3-1 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-11 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-12 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-13 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-14 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-16 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-17 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-18 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-19 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-20 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-22 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-24 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-3 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-4 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-7 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-3-8 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-14 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-18 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-4-19 - Industrial communication networks. Fieldbus specifications
- BS-EN-61158-5 - Digital data communications for measurement and control. Fieldbus for use in industrial control systems
- BS-EN-61491 - Electrical equipment of industrial machines. Serial data link for real-time communication between controls and drives
- BS-EN-61499-1 - Function blocks
- BS-EN-61499-2 - Function blocks
- BS-EN-61511-1 - Functional safety. Safety instrumented systems for the process industry sector
- BS-EN-61511-2 - Functional safety. Safety instrumented systems for the process industry sector
- BS-EN-61512-2 - Batch control
- BS-EN-61512-3 - Batch control
- BS-EN-61690-1/2 - Electronic design interchange format (EDIF)
- BS-EN-61691-3-2 - Behaviour language
- BS-EN-61691-3-3 - Design automation. Behavioural languages
- BS-EN-61784-1 - Industrial communication networks. Profiles
- BS-EN-61784-2 - Industrial communication networks. Profiles
- BS-EN-61804-2 - Function blocks (FB) for process control
- BS-EN-61804-3 - Function Blocks (FB) for process control and Electronic Device Description Language (EDDL)
- BS-EN-61804-4 - Function blocks (FB) for process control and Electronic Device Description Language (EDDL)
- BS-EN-61804-5 - Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-61987-1 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues. Measuring equipment with analogue and digital output
- BS-EN-61987-10 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-21 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-22 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-23 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-24-1 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-24-2 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-61987-24-3 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-62264-1 - Enterprise-control system integration
- BS-EN-62264-2 - Enterprise-control system integration
- BS-EN-62264-3 - Enterprise-control system integration
- BS-EN-62264-3-TC - Tracked Changes. Enterprise-control system integration
- BS-EN-62264-5 - Enterprise-control system integration
- BS-EN-62419 - Control technology. Rules for the designation of measuring instruments
- BS-EN-62424 - Representation of process control engineering. Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
- BS-EN-62541-3 - OPC unified architecture
- BS-EN-62714-1 - Engineering data exchange format for use in industrial automation systems engineering
- BS-EN-62714-2 - Engineering data exchange format for use in industrial automation systems engineering (AutomationML)
- BS-EN-IEC-60987 - Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
- BS-EN-IEC-61131-10 - Programmable controllers
- BS-EN-IEC-61131-9 - Programmable controllers
- BS-EN-IEC-61131-9-TC - Tracked Changes. Programmable controllers
- BS-EN-IEC-61784-1-0 - Industrial networks. Profiles
- BS-EN-IEC-61784-1-1 - Industrial networks. Profiles
- BS-EN-IEC-61784-1-16 - Industrial networks. Profiles
- BS-EN-IEC-61784-1-19 - Industrial networks. Profiles
- BS-EN-IEC-61784-1-2 - Industrial networks. Profiles
- BS-EN-IEC-61784-1-3 - Industrial networks. Profiles
- BS-EN-IEC-61784-1-4 - Industrial networks. Profiles
- BS-EN-IEC-61784-1-5 - Industrial networks. Profiles
- BS-EN-IEC-61784-1-6 - Industrial networks. Profiles
- BS-EN-IEC-61784-1-8 - Industrial networks. Profiles
- BS-EN-IEC-61784-1-9 - Industrial networks. Profiles
- BS-EN-IEC-61784-2 - Industrial communication networks. Profiles
- BS-EN-IEC-61784-2-0 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-10 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-11 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-12 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-13 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-14 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-15 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-16 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-17 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-19 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-20 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-21 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-3 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-4 - Industrial networks. Profiles
- BS-EN-IEC-61784-2-8 - Industrial networks. Profiles
- BS-EN-IEC-61784-5-22 - Industrial networks. Profiles
- BS-EN-IEC-61804-2 - Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-IEC-61804-2-TC - Tracked Changes. Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-IEC-61804-3 - Devices and integration in enterprise systems. Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-IEC-61804-4 - Devices and integration in enterprise systems. Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-IEC-61804-5 - Devices and integration in enterprise systems. Function blocks (FB) for process control and electronic device description language (EDDL)
- BS-EN-IEC-61987-92 - Industrial-process measurement and control. Data structures and elements in process equipment catalogues
- BS-EN-IEC-62541-14 - OPC unified architecture
- BS-EN-IEC-62714-1 - Engineering data exchange format for use in industrial automation systems engineering. Automation Markup Language
- BS-EN-IEC-62714-2 - Engineering data exchange format for use in industrial automation systems engineering. Automation markup language
- BS-EN-IEC-62769-150-1 - Field device integration (FDI)
- BS-EN-IEC-62769-150-1-TC - Tracked Changes. Field device integration (FDI)
- BS-EN-ISO-19439 - Enterprise integration. Framework for enterprise modelling
- BS-EN-ISO/ASTM-52915 - Specification for additive manufacturing file format (AMF) Version 1.2
- BS-IEC-61511-1 - Functional Safety, Safety Instrumented Systems for the Process Industry Sector, Framew
- BS-IEC-61511-3 - Functional Safety, Safety Instrumented Systems for the Process Industry Sector, Guidan
- BS-IEC-61523-3 - Delay and power calculation standards
- BS-IEC-61588 - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
- BS-IEC-61588-TC - Tracked Changes. Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
- BS-IEC-62264-1 - Enterprise-Control System Integration, Models & Terminology
- BS-IEC-62264-2 - Enterprise-Control System Integration, Object Model Attributes
- BS-IEC-62265 - Advanced library format (ALF) describing integrated circuit (IC) technology, cells and blocks
- BS-ISO-10303-201 - Industrial automation systems and integration. Product data representation and exchange
- BS-ISO-10756 - Graphic technology. Prepress digital data exchange. Colour line art data on magnetic tape
- BS-ISO-10759 - Graphic technology. Prepress digital data exchange. Monochrome image data on magnetic tape
- BS-ISO-13399-1 - Cutting tool data representation and exchange
- BS-ISO-13399-2 - Cutting Tool Data Representation & Exchange, Reference Dictionary for the Cutting Item
- BS-ISO-13584-20 - Industrial automation systems and integration. Parts library
- BS-ISO-13928 - Application guide for ISO 10755, ISO 10756, ISO 10757, ISO 10758 and ISO 10759
- BS-ISO-23219 - Natural gas. Format for data from gas chromatograph analysers for natural gas. XML File Format
- BS-ISO-23247-1 - Automation systems and integration. Digital twin framework for manufacturing
- BS-ISO-23247-2 - Automation systems and integration. Digital twin framework for manufacturing
- BS-ISO-23247-3 - Automation systems and integration. Digital twin framework for manufacturing
- BS-ISO-23247-4 - Automation systems and integration. Digital twin framework for manufacturing
- BS-ISO/ASTM-52915 - Standard specification for additive manufacturing file format (AMF) Version 1.1
- CWA-14113-1 - Product Terminology & Classification, Electronic Commerce for the Sanitary Ware & Heat
- CWA-14113-2 - Part 2: Digital Formats, Electronic Commerce for the Sanitaryware & Heating Systems In
- CWA-14113-3 - Part 3: Rights & Rules, Electronic Commerce for the Sanitaryware & Heating Systems Ind
- CWA-14113-4 - Electronic commerce for the sanitaryware and heating systems industry. Industry common data bank
- CWA-14172-4 - Eessi Conformity Assessment Guidance, Signature-Creation Applications & General Guidel
- CWA-14172-5 - Eessi Conformity Assessment Guidance, Secure Signature-Creation Devices
- CWA-14248 - Funstep (Furniture Product & Business Data) - Funstep Application Activity Model - Aam
- CWA-14249 - Funstep (Furniture Product & Business Data) - Funstep Application Reference Model - AR
- CWA-14708 - Practical Use of Electronic Signatures in E-Commerce: a Guide for Smes
- CWA-14746 - Electronic Commerce: a Case Study of the Footwear Industry in Europe
- CWA-14949 - Funstep AP-Application Interpreted Model, Including Validation Guidelines
- CWA-14950 - Implementation Planning for Ap236
- CWA-15043 - Proposal for a XML-Based Format for Storage & Exchange of Design Data in the Footwear
- CWA-15142 - European Econstruction Ontology (Eeo)
- CWA-15556-1 - Product Description & Classification, New Property Library
- CWA-15556-2 - Product Description & Classification, Product Classes With Sets of Properties
- CWA-15556-3 - Product Description & Classification, Results of Development in Harmonization of Produ
- CWA-15557 - Scenarios & Xml Templates for B2B in Textile Clothing Manufacturing & Retail
- CWA-15748-10 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Sensors
- CWA-15748-11 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Vendor
- CWA-15748-12 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Camera
- CWA-15748-14 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Card Em
- CWA-15748-15 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Cash-in
- CWA-15748-16 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10 Card Dis
- CWA-15748-17 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Barcode
- CWA-15748-18 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Item Pr
- CWA-15748-2 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Service
- CWA-15748-3 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Printer
- CWA-15748-4 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Identif
- CWA-15748-6 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Pin Key
- CWA-15748-61 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Applica
- CWA-15748-62 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Printer
- CWA-15748-63 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Identif
- CWA-15748-64 - Part 64: Cash Dispenser Device Class Interface, Migration From Version 3.0 (CWA-14050)
- CWA-15748-65 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Pin Key
- CWA-15748-66 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Check R
- CWA-15748-67 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Deposit
- CWA-15748-68 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Text Te
- CWA-15748-69 - Extensions for Financial Services (Xfs), Interface Specification, Release 3.10, Sensor
- CWA-15748-7 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Check R
- CWA-15748-70 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Vendor
- CWA-15748-71 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Camera
- CWA-15748-72 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Alarm D
- CWA-15748-74 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Cash-in
- CWA-15748-9 - Extensions for Financial Services (Xfs) Interface Specification, Release 3.10, Text Te
- CWA-16111 - Voluntary Technology Dialogue Framework (Vtdf)
- CWA-16112 - Self-Assessment Framework for Managers
- DD-ENV-50208-6 - Data interchange format for simulated and measured data (ISMD)
- DD-IEC-61804-1 - Function blocks (FB) for process control. Overview of system aspects
- DD-IEC-PAS-61512-3 - Batch Control, General & Site Recipe Models & Representation
- DD-IEC/PAS-61512-3 - Batch control
- DD-IEC/PAS-61512-4 - Batch Control, Batch Production Records
- DD-ISO-13399-100 - Cutting tool data representation and exchange
- DD-ISO-13399-150 - Cutting tool data representation and exchange
- DD-ISO-13399-2 - Cutting tool data representation and exchange. Reference dictionary for the cutting items
- DD-ISO-13399-3 - Cutting Tool Data Representation & Exchange, Reference Dictionary for Tool Items
- DD-ISO-13399-4 - Cutting tool data representation and exchange, Reference dictionary for adaptive items
- DD-ISO-13399-50 - Cutting Tool Data Representation & Exchange, Reference Dictionary for Reference System
- DD-ISO-13399-60 - Cutting tool data representation and exchange. Reference dictionary for connection systems
- KIT-127 - Functional Safety, Safety Instrumented Systems (Sis) Kit
- PAS-1040 - Digital Readiness. Adopting digital technologies in manufacturing. Guide
- PAS-182 - Smart city concept model. Guide to establishing a model for data interoperability
- PAS-7040 - Digital manufacturing. Trustworthiness and precision of networked sensors. Guide
- PD-CEN-16658 - Requirements for establishing manufacturing enterprise process interoperability. Maturity model for assessing enterprise interoperability
- PD-CEN-17859 - Service Modelling Language
- PD-CLC-61158-1 - Industrial communication networks. Fieldbus specifications
- PD-CLC-61804-4 - Function blocks (FB) for process control
- PD-CLC-IEC-61508-0 - Functional safety of electrical/electronic/programmable electronic safety-related systems
- PD-IEC-61131-4 - Programmable controllers
- PD-IEC-61131-8 - Industrial-process measurement and control. Programmable controllers
- PD-IEC-61131-8-TC - Tracked Changes. Industrial-process measurement and control. Programmable controllers
- PD-IEC-61491 - Electrical equipment of industrial machines. Serial data link for real-time communication between controls and drives
- PD-IEC-61508-3-1 - Functional safety of electrical/electronic/programmable electronic safety-related systems
- PD-IEC-61804-6 - Function blocks (FB) for process control. Electronic device description language (EDDL)
- PD-IEC-61908 - The technology roadmap for industry data dictionary structure, utilization and implementation
- PD-IEC-62390 - Common automation device. Profile guideline
- PD-IEC-62720 - Identification of units of measurement for computer-based processing
- PD-IEC-62795 - Interoperation guide for field device tool (FDT)/device type manager (DTM) and electronic device description language (EDDL)
- PD-IEC-63051 - Documentation on design automation subjects. Mathematical algorithm hardware description languages for system level modeling and verification (HDLMath)
- PD-IEC/PAS-62734 - Industrial communication networks. Fieldbus specifications. Wireless systems for industrial automation: process control and related applications
- PD-IEC/PAS-63088 - Smart manufacturing. Reference architecture model industry 4.0 (RAMI4.0)
- PD-IEC/PAS-63178 - Smart manufacturing service platform. Service-oriented integration requirements of the manufacturing resource/capability
- PD-IEC-PAS-63256 - Industrial communication networks. Broadband fieldbus specification. Autbus
- PD-ISO-13399-2 - Cutting tool data representation and exchange
- PD-ISO-13399-201 - Cutting tool data representation and exchange
- PD-ISO-13399-202 - Cutting tool data representation and exchange
- PD-ISO-13399-203 - Cutting tool data representation and exchange
- PD-ISO-13399-204 - Cutting tool data representation and exchange
- PD-ISO-13399-2-TC - Tracked Changes. Cutting tool data representation and exchange
- PD-ISO-13399-3 - Cutting tool data representation and exchange
- PD-ISO-13399-301 - Cutting tool data representation and exchange
- PD-ISO-13399-302 - Cutting tool data representation and exchange
- PD-ISO-13399-303 - Cutting tool data representation and exchange
- PD-ISO-13399-304 - Cutting tool data representation and exchange
- PD-ISO-13399-305 - Cutting tool data representation and exchange
- PD-ISO-13399-306 - Cutting tool data representation and exchange
- PD-ISO-13399-307 - Cutting tool data representation and exchange
- PD-ISO-13399-308 - Cutting tool data representation and exchange
- PD-ISO-13399-309 - Cutting tool data representation and exchange
- PD-ISO-13399-310 - Cutting tool data representation and exchange
- PD-ISO-13399-311 - Cutting tool data representation and exchange
- PD-ISO-13399-312 - Cutting tool data representation and exchange
- PD-ISO-13399-313 - Cutting tool data representation and exchange
- PD-ISO-13399-314 - Cutting tool data representation and exchange
- PD-ISO-13399-315 - Cutting tool data representation and exchange
- PD-ISO-13399-4 - Cutting tool data representation and exchange
- PD-ISO-13399-401 - Cutting tool data representation and exchange
- PD-ISO-13399-403 - Cutting tool data representation and exchange
- PD-ISO-13399-405 - Cutting tool data representation and exchange
- PD-ISO-13399-406 - Cutting tool data representation and exchange
- PD-ISO-13399-4-TC - Tracked Changes. Cutting tool data representation and exchange
- PD-ISO-13399-5 - Cutting tool data representation and exchange
- PD-ISO-13399-50 - Cutting tool data representation and exchange
- PD-ISO-13399-60 - Cutting tool data representation and exchange
- PD-ISO-13399-70 - Cutting tool data representation and exchange
- PD-ISO-13399-71 - Cutting tool data representation and exchange
- PD-ISO-13399-72 - Cutting tool data representation and exchange
- PD-ISO-13399-80 - Cutting tool data representation and exchange
- PD-ISO-13399-80-TC - Tracked Changes. Cutting tool data representation and exchange
- PD-ISO-18876-1 - Industrial automation systems and integration. Integration of industrial data for exchange, access and sharing
- PD-ISO-18876-2 - Industrial automation systems and integration. Integration of industrial data for exchange, access and sharing
- PD-ISO-24064 - Document management. Portable document format. RichMedia annotations conforming to the ISO 10303-242 (STEP AP 242) specification
- PD-ISO-24464 - Automation systems and integration. Industrial data. Visualization elements of digital twins
- PD-ISO/IEC-30166 - Internet of things (IoT). Industrial IoT
- PD-R217-016 - Pinnacles component information standard 1.2. PCIS sample documents
IEC:
- IEC-381-1 - Analogue signals for process control systems. Part 1: Direct current signals
- IEC-50(371) - International Electrotechnical Vocabulary. Chapter 371: Telecontrol
- IEC-50(371)-1 - Amendment 1 - International Electrotechnical Vocabulary. Chapter 371: Telecontrol
- IEC-61003-1 - Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance
- IEC-61131-1 - Programmable controllers - Part 1: General information
- IEC-61131-10 - Programmable controllers . Part 10: PLC open XML exchange format
- IEC-61131-2 - Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests
- IEC-61131-3 - Programmable controllers - Part 3: Programming languages
- IEC-61131-5 - Programmable controllers - Part 5: Communications
- IEC-61131-6 - Programmable controllers - Part 6: Functional safety
- IEC-61131-7 - Programmable controllers - Part 7: Fuzzy control programming
- IEC-61131-9 - Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI)
- IEC-61158-1 - Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series
- IEC-61158-2 - Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
- IEC-61491 - Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives
- IEC-61499-1 - Function blocks - Part 1: Architecture
- IEC-61499-2 - Function blocks - Part 2: Software tool requirements
- IEC-61499-3 - Part 3: Tutorial Information, Function Blocks for Industrial-Process Measurement & Control
- IEC-61508-0 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508
- IEC-61508-3-1 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3-1: Software requirements - Reuse of pre-existing software elements to implement all or part of a safety function
- IEC-61508-7 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures
- IEC-61508-SER - IEC 61508-1, IEC 61508-2, IEC 61508-3, IEC 61508-4, IEC 61508-5, IEC 61508-6 and IEC 61508-7
- IEC-61512-2 - Batch control - Part 2: Data structures and guidelines for languages
- IEC-61512-3 - Batch control - Part 3: General and site recipe models and representation
- IEC-61523-2 - Part 2: Pre-Layout Delay Calculation Specification for Cmosasic Libraries, Delay & Power
- IEC-61523-3 - Delay and power calculation standards - Part 3: Standard Delay Format (SDF) for the electronic design process
- IEC-61588 - Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
- IEC-61690-1 - Electronic design interchange format (EDIF) - Part 1: Version 3 0 0. (This publication is available in electronic HTML format only)
- IEC-61690-2-CD - Electronic design interchange format (EDIF) - Part 2: Version 4 0 0. (This publication is available in electronic HTML format only)
- IEC-61691-2 - Part 2: Vhdl Multilogic System for Model Interoperability, Behavioural Languages
- IEC-61691-3-2 - Part 3-2: Mathematical Operation in Vhdl, Behavioural Languages
- IEC-61691-3-3 - Part 3-3: Synthesis in Vhdl, Behavioural Languages
- IEC-61784-1 - Industrial communication networks - Profiles Part 1: Fieldbus profiles
- IEC-61784-2 - Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC/IEEE 8802-3
- IEC-61784-2-11 - Industrial networks - Profiles - Part 2-11: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 11
- IEC-61784-2-12 - Industrial networks - Profiles - Part 2-12: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 12
- IEC-61784-2-13 - Industrial networks - Profiles - Part 2-13: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 13
- IEC-61784-2-14 - Industrial networks - Profiles - Part 2-14: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 14
- IEC-61784-2-15 - Industrial networks - Profiles - Part 2-15: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 15
- IEC-61784-2-16 - Industrial networks - Profiles - Part 2-16: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 16
- IEC-61784-2-17 - Industrial networks - Profiles - Part 2-17: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 17
- IEC-61784-2-18 - Industrial networks - Profiles - Part 2-18: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 18
- IEC-61784-2-2 - Industrial networks - Profiles - Part 2-2: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 2
- IEC-61784-2-20 - Industrial networks - Profiles - Part 2-20: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 20
- IEC-61784-2-21 - Industrial networks - Profiles - Part 2-21: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 21
- IEC-61784-2-3 - Industrial networks - Profiles - Part 2-3: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 3
- IEC-61784-2-4 - Industrial networks - Profiles - Part 2-4: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 4
- IEC-61784-2-6 - Industrial networks - Profiles - Part 2-6: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 6
- IEC-61784-2-8 - Industrial networks - Profiles - Part 2-8: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 8
- IEC-61804-1 - Function blocks (FB) for process control - Part 1: Overview of system aspects
- IEC-61804-2 - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 2: Specification of FB concept
- IEC-61804-3 - Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 3: EDDL syntax and semantics
- IEC-61804-4 - Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 4: EDD interpretation
- IEC-61804-5 - Devices and intergration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library
- IEC-61804-6 - Function blocks (FB) for process control - Electronic device description language (EDDL) - Part 6: Meeting the requirements for integrating fieldbus devices in engineering tools for field devices
- IEC-61908 - The technology roadmap for industry data dictionary structure, utilization and implementation
- IEC-61918 - Industrial communication networks - Installation of communication networks in industrial premises
- IEC-61918-AM2 - Amendment 2 - Industrial communication networks - Installation of communication networks in industrial premises
- IEC-61926-1 - Design automation - Part 1: Standard test language for all systems - Common abbreviated test language for all systems (C/ATLAS)
- IEC-61987-1 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output
- IEC-61987-21 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures
- IEC-61987-22 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange
- IEC-61987-23 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange
- IEC-61987-24-1 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1: List of Properties (LOPs) of positioners and I/P converters for electronic data exchange
- IEC-61987-24-2 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange
- IEC-61987-24-3 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange
- IEC-61987-92 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 92: Lists of properties (LOP) of measuring equipment for electronic data exchange - Aspect LOPs
- IEC-62050 - Vhdl Register Transfer Level (Rtl) Synthesis
- IEC-62264-1 - Enterprise-control system integration - Part 1: Models and terminology
- IEC-62264-2 - Enterprise-control system integration - Part 2: Object and attributes for enterprise-control system integration
- IEC-62264-3 - Enterprise-control system integration - Part 3: Activity models of manufacturing operations management
- IEC-62390 - Common automation device - Profile guideline
- IEC-62424 - Representation of process control engineering - Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
- IEC-62657-1 - Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations
- IEC-62714-1 - Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 1: Architecture and general requirements
- IEC-62714-1-RL - Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 1: Architecture and general requirements
- IEC-62714-2 - Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 2: Semantics libraries
- IEC-62720 - Identification of units of measurement for computer-based processing
- IEC-62769-150-1-RL - Field device integration (FDI)® - Part 150-1: Profiles - ISA100
- IEC-62795 - Interoperation guide of field device tool (FDT) / device type manager (DTM) and electronic device description language (EDDL)
- IEC-63051 - Documentation on design automation subjects - Mathematical algorithm hardware description languages for system level modeling and verification (HDLMath)
- IEC/PAS-61512-3 - Part 3: General & Site Recipe Models & Representation, Batch Control
- IEC/PAS-61804-1 - Part 1: Overview of System Aspects, Function Blocks (Fb) Forprocess Control
- IEC/PAS-61804-2 - Part 2: Specification of Fb Concept & Electronic Device Description Language (Eddl), Funct
- IEC/PAS-61987-1 - Part 1: Measuring Equipment With Analogue & Digital Output - Industrial Process Measur
- IEC/PAS-62030 - Section 1: Modbus Application Protocol, Specification V1.1A- Section 2: Real-Time Publis
- IEC/PAS-62405 - Real-Time Ethernet Vnet/IP Specification
- IEC/PAS-62406 - Real-Time Ethernet Tcnet (Time-Critical Control Network)
- IEC/PAS-62407 - Real-Time Ethernet Control Automation Technology (Ethercat)
- IEC/PAS-62408 - Real-Time Ethernet Powerlink (Epl)
- IEC/PAS-62409 - Real-Time Ethernet for Plant Automation (Epa)
- IEC/PAS-62411 - Real-Time Ethernet Profinet Io
- IEC/PAS-62412 - Real-Time Ethernet P-Net on IP Specification
- IEC/PAS-62413 - Real-Time Ethernet - Ethernet/IP With Time Synchronization
- IEC/PAS-62424 - Representation of Process Control Engineering Requests in P&I Diagrams & Data Exchange
- IEC/PAS-62453-1 - Part 1: Concepts & Detailed Description, Field Device Tool (Fdt) Interface Specificati
- IEC/PAS-62453-2 - Part 2: Interbus Communication, Field Device Tool (Fdt) Interface Specification
- IEC/PAS-62453-3 - Part 3: Profibus Communication, Field Device Tool (Fdt) Interface Specification
- IEC/PAS-62453-4 - Part 4: Hart Communication, Field Device Tool (Fdt) Interface Specification
- IEC/PAS-62453-5 - Part 5: Foundation Fieldbus Communication, Field Device Tool (Fdt) Interface Specifica
- IEC/PAS-62734 - Industrial communication networks - Fieldbus specifications - Wireless systems for industrial automation: process control and related applications
- IEC/PAS-63088 - Smart manufacturing - Reference architecture model industry 4.0 (RAMI4.0)
- IEC/PAS-63178 - Smart manufacturing service platform - Service-oriented integration requirements of the manufacturing resource/capability
ISO:
- ISO-13399-1 - Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model
- ISO-13399-100 - Cutting tool data representation and exchange - Part 100: Definitions, principles and methods for reference dictionaries
- ISO-13399-150 - Cutting tool data representation and exchange - Part 150: Usage guidelines
- ISO-13399-1-AM1 - Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model - Amendment 1
- ISO-13399-2 - Cutting tool data representation and exchange - Part 2: Reference dictionary for the cutting items
- ISO-13399-201 - Cutting tool data representation and exchange - Part 201: Creation and exchange of 3D models - Regular inserts
- ISO-13399-202 - Cutting tool data representation and exchange - Part 202: Creation and exchange of 3D models - Irregular inserts
- ISO-13399-203 - Cutting tool data representation and exchange - Part 203: Creation and exchange of 3D models - Replaceable inserts for drilling
- ISO-13399-204 - Cutting tool data representation and exchange - Part 204: Creation and exchange of 3D models - Inserts for reaming
- ISO-13399-3 - Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items
- ISO-13399-301 - Cutting tool data representation and exchange - Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
- ISO-13399-302 - Cutting tool data representation and exchange - Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
- ISO-13399-303 - Cutting tool data representation and exchange - Part 303: Creation and exchange of 3D models - Solid end mills
- ISO-13399-304 - Cutting tool data representation and exchange - Part 304: Creation and exchange of 3D models - Solid milling cutters with arbor hole
- ISO-13399-305 - Cutting tool data representation and exchange - Part 305: Creation and exchange of 3D models - Modular tooling systems with adjustable cartridges for boring
- ISO-13399-306 - Cutting tool data representation and exchange - Part 306: Creation and exchange of 3D models - Drills and countersinking tools for indexable inserts
- ISO-13399-307 - Cutting tool data representation and exchange - Part 307: Creation and exchange of 3D models - End mills for indexable inserts
- ISO-13399-308 - Cutting tool data representation and exchange - Part 308: Creation and exchange of 3D models - Milling cutters with arbor hole for indexable inserts
- ISO-13399-309 - Cutting tool data representation and exchange - Part 309: Creation and exchange of 3D models - Tool holders for indexable inserts
- ISO-13399-310 - Cutting tool data representation and exchange - Part 310: Creation and exchange of 3D models - Turning tools with carbide tips
- ISO-13399-311 - Cutting tool data representation and exchange - Part 311: Creation and exchange of 3D models - Solid reamers
- ISO-13399-312 - Cutting tool data representation and exchange - Part 312: Creation and exchange of 3D models - Reamers for indexable inserts
- ISO-13399-313 - Cutting tool data representation and exchange - Part 313: Creation and exchange of 3D models - Burrs
- ISO-13399-314 - Cutting tool data representation and exchange - Part 314: Creation and exchange of 3D models - Cartridges for indexable inserts
- ISO-13399-315 - Cutting tool data representation and exchange - Part 315: Creation and exchange of 3D models - Modelling of machine operated feed out tools
- ISO-13399-4 - Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items
- ISO-13399-401 - Cutting tool data representation and exchange - Part 401: Creation and exchange of 3D models - Converting, extending and reducing adaptive items
- ISO-13399-403 - Cutting tool data representation and exchange - Part 403: Creation and exchange of 3D models - Modelling of driven tool units
- ISO-13399-405 - Cutting tool data representation and exchange - Part 405: Creation and exchange of 3D models - Collets
- ISO-13399-406 - Cutting tool data representation and exchange - Part 406: Creation and exchange of 3D models - Modelling of connection interface
- ISO-13399-5 - Cutting tool data representation and exchange - Part 5: Reference dictionary for assembly items
- ISO-13399-50 - Cutting tool data representation and exchange - Part 50: Reference dictionary for reference systems and common concepts
- ISO-13399-60 - Cutting tool data representation and exchange - Part 60: Reference dictionary for connection systems
- ISO-13399-70 - Cutting tool data representation and exchange - Part 70: Graphical data layout - Layer setting for tool layout
- ISO-13399-71 - Cutting tool data representation and exchange - Part 71: Graphical data layout - Creation of documents for standardized data exchange: Graphical product information
- ISO-13399-72 - Cutting tool data representation and exchange - Part 72: Creation of documents for the standardized data exchange - Definition of properties for drawing header and their XML-data exchange
- ISO-13399-80 - Cutting tool data representation and exchange - Part 80: Creation and exchange of 3D models - Overview and principles
- ISO-18876-1 - Industrial automation systems and integration - Integration of industrial data for exchange, access and sharing - Part 1: Architecture overview and description
- ISO-18876-2 - Industrial automation systems and integration - Integration of industrial data for exchange, access and sharing - Part 2: Integration and mapping methodology
- ISO-23219 - Natural gas - Format for data from gas chromatograph analysers for natural gas - XML file format
- ISO-23247-1 - Automation systems and integration - Digital twin framework for manufacturing - Part 1: Overview and general principles
- ISO-23247-2 - Automation systems and integration - Digital twin framework for manufacturing - Part 2: Reference architecture
- ISO-23247-3 - Automation systems and integration - Digital twin framework for manufacturing - Part 3: Digital representation of manufacturing elements
- ISO-23247-4 - Automation systems and integration - Digital twin framework for manufacturing - Part 4: Information exchange
- ISO-24064 - Document management - Portable document format - RichMedia annotations conforming to the ISO 10303-242 (STEP AP 242) specification
- ISO-24464 - Automation systems and integration - Industrial data - Visualization elements of digital twins
- ISO-52915 - Specification for Additive Manufacturing File Format (AMF) Version 1.2
- ISO-7462 - Shipbuilding -- Principal ship dimensions -- Terminology and definitions for computer applications
- ISO/ASTM-52915 - Specification for additive manufacturing file format (AMF) Version 1.2
- ISO/IEC-2382-24 - Information technology - Vocabulary - Part 24: Computer-integrated manufacturing
- ISO/IEC-30162 - Internet of Things (IoT) - Compatibility requirements and model for devices within industrial IoT systems
- ISO/IEC-30166 - Internet of things (IoT) - Industrial IoT
- ISO/IEC-GUIDE 77-1 - Guide for specification of product properties and classes - Part 1: Fundamental benefits
- ISO/IEC-GUIDE 77-2 - Guide for specification of product properties and classes - Part 2: Technical principles and guidance
- ISO/IEC-GUIDE 77-3 - Guide for specification of product properties and classes - Part 3: Experience gained
Other SDOs:
- EN-12053 - Safety of Industrial Trucks - Test Methods for Measuring Noise Emissions
- EN-50325-5 - Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 5: Functional safety communication based on EN 50325-4
- EN-61003-1 - Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance
- EN-61131-2 - Programmable Controllers, Equipment Requirements & Tests
- EN-61131-3 - Programmable controllers - Part 3: Programming languages
- EN-61131-6 - Programmable controllers - Part 6: Functional safety
- EN-61131-9 - Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI)
- EN-61158-2 - Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
- EN-61158-3-1 - Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements
- EN-61158-3-11 - Industrial Communication Networks, Fieldbus Specification, Data-Link Layer Service Def
- EN-61158-3-13 - Industrial communication networks - Fieldbus specifications - Part 3-13: Data-link layer service definition - Type 13 elements
- EN-61158-3-16 - Part 3-16: Data-Link Layer Service Definition - Type 16 Elements, Industrial Communica
- EN-61158-3-17 - Part 3-17: Data-Link Layer Service Definition - Type 17 Elements, Industrial Communica
- EN-61158-3-18 - Industrial Communication Networks, Fieldbus Specifications, Data-Link Layer Service D
- EN-61158-3-2 - Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements
- EN-61158-3-3 - Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements
- EN-61158-3-4 - Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements
- EN-61158-3-7 - Part 3-7: Data-Link Layer Service Definition - Type 7 Elements, Industrial Communicati
- EN-61158-3-8 - Part 3-8: Data-Link Layer Service Definition - Type 8 Elements, Industrial Communicati
- EN-61499-1 - Function blocks - Part 1: Architecture
- EN-61499-2 - Function blocks - Part 2: Software tool requirements
- EN-61512-3 - Batch Control, General & Site Recipe Models & Representation
- EN-61784-1 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles
- EN-61784-2 - Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
- EN-61804-2 - Function Blocks (Fb) for Process Control, Specification of Fb Concept & Electronic Dev
- EN-61804-3 - Function Blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 3: EDDL syntax and semantics
- EN-61804-4 - Function blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 4: EDD interpretation
- EN-61804-5 - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library
- EN-61918 - Industrial communication networks - Installation of communication networks in industrial premises
- EN-61987-1 - Industrial-Process Measurement & Control, Data Structures & Elements in Process Equip
- EN-61987-21 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures
- EN-61987-22 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange
- EN-61987-23 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange
- EN-61987-24-2 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange
- EN-61987-24-3 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange
- EN-62264-1 - Enterprise-control system integration - Part 1: Models and terminology
- EN-62264-2 - Enterprise-control system integration - Part 2: Objects and attributes for enterprise-control system integration
- EN-62264-3 - Enterprise-control system integration - Part 3: Activity models of manufacturing operations management
- EN-62419 - Control Technology, Rules for the Designation of Measuring Instruments
- EN-62424 - Representation of process control engineering - Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
- EN-62657-1 - Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations
- EN-62714-1 - Engineering data exchange format for use in industrial automation systems engineering - Part 1: Architecture and General Requirements
- EN-62714-2 - Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 2: Role class libraries
- EN-IEC-61131-10 - Programmable controllers - Part 10: PLC open XML exchange format (IEC 61131-10:2019)
- EN-IEC-61784-1 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles (IEC 61784-1:2019)
- EN-IEC-61784-2 - Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC/IEEE 8802-3 (IEC 61784-2:2019)
- EN-IEC-61804-2 - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 2: Specification of FB concept
- EN-IEC-61918 - Industrial communication networks - Installation of communication networks in industrial premises (IEC 61918:2018)
- EN-IEC-62714-1 - Engineering data exchange format for use in industrial automation systems engineering - Part 1: Architecture and General Requirements
- EN-ISO-19439 - Enterprise Integration, Framework for Enterprise Modeling
- EN-ISO/ASTM-52915 - Specification for additive manufacturing file format (AMF) Version 1.2
- JIS-B-3502 - Programmable Controllers - Equipment Requirements & Tests
- SIS-CEN-17859 - Service Modelling Language
- SIS-CEN-ISO-19139-1 - Geographic information - XML schema implementation - Part 1: Encoding rules (ISO/TS 19139-1:2019)
- SIS-CEN-ISO/TS-19139 - Geographic information - Metadata - XML schema implementation (ISO/TS 19139:2007)
- SIS-CEN/TR-15449 - Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures
- SIS-CEN/TR-15449-1 - Geographic information - Spatial data infrastructures - Part 1: Reference model
- SIS-CEN/TR-15449-2 - Geographic information - Spatial data infrastructures - Part 2: Best practices
- SIS-CEN/TR-15449-3 - Geographic information - Spatial data infrastructures - Part 3: Data centric view
- SIS-CEN/TR-15449-4 - Geographic information - Spatial Data Infrastructure - Service centric view
- SIS-ISO/TR-24464 - Automation systems and integration Industrial data Visualization elements of digital twins (ISO/TR 24464:2020)
- SIS-ISO/TS-13399-100 - Cutting tool data representation and exchange - Part 100: Definitions, principles and methods for reference dictionaries
- SIS-ISO/TS-13399-150 - Cutting tool data representation and exchange - Part 150 : Usage guidelines (ISO/TS 13399-150:2008, IDT)
- SIS-ISO/TS-13399-2 - Cutting tool data representation and exchange - Part 2: Reference dictionary for cutting items (ISO/TS 13399-2:2021, IDT)
- SIS-ISO/TS-13399-201 - Cutting tool data representation and exchange - Part 201: Creation and exchange of 3D models - Regular inserts (ISO/TS 13399-201:2014, IDT)
- SIS-ISO/TS-13399-202 - Cutting tool data representation and exchange - Part 202: Creation and exchange of 3D models - Irregular inserts (ISO/TS 13399-202:2015, IDT)
- SIS-ISO/TS-13399-203 - Cutting tool data representation and exchange - Part 203: Creation and exchange of 3D models - Replaceable inserts for drilling
- SIS-ISO/TS-13399-204 - Cutting tool data representation and exchange - Part 204: Creation and exchange of 3D models Inserts for reaming (ISO/TS 13399-204:2016, IDT)
- SIS-ISO/TS-13399-3 - Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items (ISO/TS 13399-3:2021, IDT)
- SIS-ISO/TS-13399-301 - Cutting tool data representation and exchange - Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies (ISO/TS 13399-302:2013, IDT)
- SIS-ISO/TS-13399-302 - Cutting tool data representation and exchange - Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools (ISO/TS 13399-302:2013, IDT)
- SIS-ISO/TS-13399-303 - Cutting tool data representation and exchange - Part 303: Creation and exchange of 3D models Solid end mills (ISO/TS13399-303:2016, IDT)
- SIS-ISO/TS-13399-304 - Cutting tool data representation and exchange Part 304: Creation and exchange of 3D models Solid milling cutters with arbor hole (ISO/TS 13399-304:2016, IDT)
- SIS-ISO/TS-13399-305 - Cutting tool data representation and exchange - Part 305: Creation and exchange of 3D models - Modular tooling systems with adjustable cartridges for boring
- SIS-ISO/TS-13399-306 - Cutting tool data representation and exchange - Part 306: Creation and exchange of 3D models - Drills and countersinking tools for indexable inserts
- SIS-ISO/TS-13399-307 - Cutting tool data representation and exchange - Part 307: Creation and exchange of 3D models End mills for indexable inserts (ISO/TS13399-307:2016, IDT)
- SIS-ISO/TS-13399-308 - Cutting tool data representation and exchange Part 308: Creation and exchange of 3D models Milling cutters with arbor hole for indexable inserts (ISO/TS13399-308:2016, IDT)
- SIS-ISO/TS-13399-309 - Cutting tool data representation and exchange - Part 309: Creation and exchange of 3D models - Tool holders for indexable inserts
- SIS-ISO/TS-13399-310 - Cutting tool data representation and exchange - Part 310: Creation and exchange of 3D models - Turning tools with carbide tips
- SIS-ISO/TS-13399-311 - Cutting tool data representation and exchange - Part 311: Creation and exchange of 3D models - Solid reamers
- SIS-ISO/TS-13399-312 - Cutting tool data representation and exchange - Part 312: Creation and exchange of 3D models - Reamers for indexable inserts (ISO/TS 13399-312:2016, IDT)
- SIS-ISO/TS-13399-314 - Cutting tool data representation and exchange Part 314: Creation and exchange of 3D models - Cartridges for indexable inserts
- SIS-ISO/TS-13399-315 - Cutting tool data representation and exchange - Part 315: Creation and exchange of 3D models - Modelling of machine operated feed out tools
- SIS-ISO/TS-13399-4 - Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items (ISO/TS 13399-4:2021, IDT)
- SIS-ISO/TS-13399-401 - Cutting tool data representation and exchange - Part 401: Creation and exchange of 3D models - Converting, extending and reducing adaptive items (ISO/TS 13399-401:2016, IDT)
- SIS-ISO/TS-13399-403 - Cutting tool data representation and exchange - Part 403: Creation and exchange of 3D models - Modelling of driven tool units
- SIS-ISO/TS-13399-405 - Cutting tool data representation and exchange - Part 405: Creation and exchange of 3D models - Collets
- SIS-ISO/TS-13399-406 - Cutting tool data representation and exchange Part 406: Creation and exchange of 3D models - Modelling of connection interfaces
- SIS-ISO/TS-13399-5 - Cutting tool data representation and exchange - Part 5: Reference dictionary for assembly items (ISO/TS 13399-5:2014, IDT)
- SIS-ISO/TS-13399-50 - Cutting tool data representation and exchange - Part 50: Reference dictionary for reference systems and common concepts (ISO/TS 13399-50:2013, IDT)
- SIS-ISO/TS-13399-60 - Cutting tool data representation and exchange - Part 60: Reference dictionary for connection systems (ISO/TS 13399-60:2014, IDT)
- SIS-ISO/TS-13399-70 - Cutting tool data representation and exchange - Part 70: Graphical data layout - Layer setting for tool layout
- SIS-ISO/TS-13399-71 - Cutting tool data representation and exchange - Part 71: Graphical data layout - Creation of documents for the standardized data exchange: Graphical product information (ISO/TS 13399-71:2016, IDT)
- SIS-ISO/TS-13399-72 - Cutting tool data representation and exchange - Part 72: Creation of documents for the standardized data exchange - Definition of properties for drawing header and their XML-data exchange (ISO/TS 13399-722016, IDT)
- SIS-ISO/TS-13399-80 - Cutting tool data representation and exchange - Part 80: Creation and exchange of 3D models - Overview and principles
- SIS-ISO/TS-19101-2 - Geographic information - Reference model - Part 2: Imagery (ISO/TS 19101-2:2008, IDT)
- SIS-ISO/TS-19103 - Geographic information - Conceptual schema language
- SIS-ISO/TS-19104 - Geographic information - Terminology (ISO/TS 19104:2008, IDT)
- SIS-ISO/TS-19115-3 - Geographic information - Metadata - Part 3: XML schema implementation for fundamental concepts (ISO/TS 19115-3:2016, IDT)
- SIS-ISO/TS-19127 - Geographic information - Geodetic codes and parameters
- SIS-ISO/TS-19130 - Geographic information - Imagery sensor models for geopositioning (ISO/TS 19130:2010, IDT)
- SIS-ISO/TS-19130-2 - Geographic information - Imagery sensor models for geopositioning - Part 2: SAR/InSAR, LIDAR and SONAR (ISO/TS 19130-2:2014, IDT)
- SIS-ISO/TS-19135-2 - Geographic information - Procedures for item registration - Part 2: XML Schema Implementation
- SIS-ISO/TS-19138 - Geographic information - Data quality measures
- SIS-ISO/TS-19139 - Geographic information - Metadata - XML schema implementation (ISO/TS 19139:2007, IDT)
- SIS-ISO/TS-19139-2 - Geographic information - Metadata - XML Schema Implementation - Part 2 : Extensions for imagery and gridded data (ISO/TS 19139-2:2012, IDT)
- SIS-ISO/TS-19150-1 - Geographic information - Ontology - Part 1: Framework (ISO/TS 19150-1:2012, IDT)
- SIS-ISO/TS-19158 - Geographic information - Quality assurance of data supply (ISO/TS 19158:2012, IDT)
- SIS-TR-22 - Geographic information - Surface Water Systems - Handbook
- SIS-TR-40 - Geographic information - Technical framework - Manual for data product specification
- SMS-2214 - Brandmateriel - Slangskåp med icke formstyv slang
- SMS-2222 - Tolerances. Classification of functional requirements
- SS-637004-1 - Geographic information - Road and railway networks - Part 1: Concept model and application schema
- SS-637006 - Geographic information - Generic representation of geographic phenomena
- SS-637007 - Geographic information - Representation of changes in datasets
- SS-637008 - Geographic information - Water Systems - Rules for national applications and for the Inspire hydrography theme
- SS-637009 - Geographic information - Data on forest and forestry
- SS-EN-13445 - Unfired pressure vessels
- SS-EN-13458-2 - Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
- SS-EN-14387 - Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
- SS-EN-61508-1 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
- SS-EN-ISO-10426-1 - Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2009)
- SS-EN-ISO-18526-4 - Eye and face protection - Test methods - Part 4: Headforms (ISO 18526-4:2020)
- SS-EN-ISO-18557 - Characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes (ISO 18557:2017)
- SS-EN-ISO-19101 - Geographic information - Reference model (ISO 19101:2002)
- SS-EN-ISO-19101-1 - Geographic information - Reference model - Part 1: Fundamentals (ISO 19101-1:2014)
- SS-EN-ISO-19105 - Geographic information - Conformance and testing (ISO 19105:2022)
- SS-EN-ISO-19106 - Geographic information - Profiles (ISO 19106:2004)
- SS-EN-ISO-19107 - Geographic information - Spatial schema (ISO 19107:2019)
- SS-EN-ISO-19108 - Geographic information - Temporal schema (ISO 19108:2002)
- SS-EN-ISO-19109 - Geographic information - Rules for application schema (ISO 19109:2015)
- SS-EN-ISO-19110 - Geographic information - Methodology for feature cataloguing (ISO 19110:2016)
- SS-EN-ISO-19110-AM1 - Geographic information - Methodology for feature cataloguing - Amendment 1 (ISO 19110:2005/Amd 1:2011)
- SS-EN-ISO-19111 - Geographic information - Referencing by coordinates - Amendment 1 (ISO 19111:2019/Amd 1:2021)
- SS-EN-ISO-19111-2 - Geographic information - Spatial referencing by coordinates - Part 2: Extension for parametric values (ISO 19111-2:2009)
- SS-EN-ISO-19111-AM2 - Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
- SS-EN-ISO-19112 - Geographic information - Spatial referencing by geographic identifiers (ISO 19112:2019)
- SS-EN-ISO-19113 - Geographic information - Quality principles (ISO 19113:2002)
- SS-EN-ISO-19114 - Geographic information - Quality evaluation procedures (ISO 19114:2003)
- SS-EN-ISO-19115 - Geographic information - Metadata (ISO 19115:2003)
- SS-EN-ISO-19115-1 - Geographic information - Metadata - Part 1: Fundamentals (ISO 19115-1:2014)
- SS-EN-ISO-19115-1-AM1 - Geographic information - Metadata - Part 1: Fundamentals - Amendment 1 (ISO 19115-1:2014/Amd 1:2018)
- SS-EN-ISO-19115-1-AM2 - Geographic information - Metadata - Part 1: Fundamentals - Amendment 2 (ISO 19115-1:2014/Amd 2:2020)
- SS-EN-ISO-19115-2 - Geographic information - Metadata - Part 2: Extensions for acquisition and processing (ISO 19115-2:2019)
- SS-EN-ISO-19115-3 - Geographic information - Metadata - Part 3: XML schema implementation for fundamental concepts (ISO 19115-3:2023)
- SS-EN-ISO-19116 - Geographic information - Positioning services (ISO 19116:2019)
- SS-EN-ISO-19116-AM1 - Geographic information - Positioning services - Amendment 1 (ISO 19116:2019/Amd 1:2021)
- SS-EN-ISO-19117 - Geographic information - Portrayal (ISO 19117:2012)
- SS-EN-ISO-19118 - Geographic information - Encoding (ISO 19118:2011)
- SS-EN-ISO-19119 - Geographic information - Services (ISO 19119:2016)
- SS-EN-ISO-19119-AM1 - Geographic information - Services - Amendment 1: Extensions of the service metadata model (ISO 19119:2005/AMD 1:2008)
- SS-EN-ISO-19123 - Geographic information - Schema for coverage geometry and functions (ISO 19123:2005)
- SS-EN-ISO-19123-1 - Geographic information - Schema for coverage geometry and functions - Part 1: Fundamentals (ISO 19123-1:2023)
- SS-EN-ISO-19125-1 - Geographic information - Simple feature access - Part 1: Common architecture (ISO 19125-1:2004)
- SS-EN-ISO-19125-2 - Geographic information - Simple feature access - Part 2: SQL option (ISO 19125-2:2004)
- SS-EN-ISO-19128 - Geographic information - Web map server interface (ISO 19128:2005)
- SS-EN-ISO-19131 - Geographic information - Data product specifications (ISO 19131:2022)
- SS-EN-ISO-19131-AM1 - Geographic information - Data product specifications - Amendment 1: Requirements relating to the inclusion of an application schema and feature catalogue and the treatment of coverages in an application schema (ISO 19131:2007/Amd 1:2011)
- SS-EN-ISO-19132 - Geographic information - Location-based services - Reference model (ISO 19132:2007)
- SS-EN-ISO-19133 - Geographic information - Location-based services - Tracking and navigation (ISO 19133:2005)
- SS-EN-ISO-19134 - Geographic information - Location-based services - Multimodal routing and navigation (ISO 19134:2007)
- SS-EN-ISO-19135 - Geographic information - Procedures for item registration (ISO 19135:2005)
- SS-EN-ISO-19135-1 - Geographic information - Procedures for item registration - Part 1: Fundamentals (ISO 19135-1:2015)
- SS-EN-ISO-19136 - Geographic information - Geography Markup Language, (GML) (ISO 19136:2007)
- SS-EN-ISO-19136-2 - Geographic information - Geography Markup Language (GML) - Part 2: Extended schemas and encoding rules (ISO 19136-2:2015)
- SS-EN-ISO-19137 - Geographic information - Core profile of the spatial schema (ISO 19137:2007)
- SS-EN-ISO-19141 - Geographic information - Schema for moving features (ISO 19141:2008)
- SS-EN-ISO-19142 - Geographic information - Web Feature Service (ISO 19142:2010)
- SS-EN-ISO-19143 - Geographic information - Filter encoding (ISO 19143:2010)
- SS-EN-ISO-19144-1 - Geographic information - Classification systems - Part 1: Classification system structure (ISO 19144-1:2009)
- SS-EN-ISO-19148 - Geographic information - Linear referencing (ISO 19148:2021)
- SS-EN-ISO-19152 - Geographic information - Land Administration Domain Model (LADM) (ISO 19152:2012)
- SS-EN-ISO-19156 - Geographic information - Observations and measurements (ISO 19156:2011)
- SS-EN-ISO-19157 - Geographic information - Data quality (ISO 19157:2013)
- SS-EN-ISO-19157-AM1 - Geographic information - Data quality - Amendment 1: Describing data quality using coverages (ISO 19157:2013/Amd 1:2018)
- SS-EN-ISO-4126-1 - Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013)
- SS-EN-ISO-4126-7 - Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013)
- SS-EN-ISO-6709 - Standard representation of geographic point location by coordinates (ISO 6709:2022)
- SS-EN-ISO-8980-2 - Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for power-variation lenses (ISO 8980-2:2017)
- SS-EN-ISO/ASTM-52915 - Specification for additive manufacturing file format (AMF) Version 1.2 (ISO/ASTM 52915:2016)
- SS-ISO-10303-1 - Industrial automation systems and integration Product data representation and exchange Part 1: Overview and fundamental principles (ISO 10303-1:2021, IDT)
- SS-ISO-10303-101 - Industrial automation systems and integration - Product data representation and exchange - Part 101: Integrated application resource: Draughting (ISO 10303-101:2018, IDT)
- SS-ISO-10303-105 - Industrial automation systems and integration - Product data representation and exchange - Part 105: Integrated application resource: Kinematics
- SS-ISO-10303-11 - Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled machine tools axes - Technical corrigendum 1
- SS-ISO-10303-201 - Industrial automation systems and integration - Product data representation and exchange - Part 201: Application protocol: Explicit draughting
- SS-ISO-10303-202 - Industrial automation systems and integration - Product data representation and exchange - Part 202: Application protocol: Associative draughting
- SS-ISO-10303-203 - Industrial automation systems and integration - Product data representation and exchange - Part 203: Application protocol: Configuration controlled design (ISO 10303-203:1994/Cor 3:2004, IDT)
- SS-ISO-10303-21 - Industrial automation systems and integration - Product data representation and exchange - Part 21: Implementation methods: Clear text encoding of the exchange structure (ISO 10303-21:2016, IDT)
- SS-ISO-10303-22 - Industrial automation systems and integration - Product data representation and exchange - Part 22: Implementation methods: Standard data access interface
- SS-ISO-10303-242 - Industrial automation systems and integration - Product data representation and exchange - Part 242: Application protocol: Managed model-based 3D engineering (ISO 10303-242, IDT)
- SS-ISO-10303-31 - Industrial automation systems and integration - Product data representation and exchange - Part 31:Conformance testing methodology and framework: General concepts
- SS-ISO-10303-32 - Industrial automation systems and integration - Product data representation and exchange - Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients
- SS-ISO-10303-41 - Industrial automation systems and integration - Product data representation and exchange - Part 41: Integrated generic resource: Fundamentals of product description and support (ISO 10303-41:2018, IDT)
- SS-ISO-10303-42 - Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resource: Geometric and topological representation (ISO 10303-42:2018, IDT)
- SS-ISO-10303-43 - Industrial automation systems and integration - Product data representation and exchange - Part 43: Integrated generic resource: Representation structures (ISO 10303-43:2018, IDT)
- SS-ISO-10303-44 - Industrial automation systems and integration - Product data representation and exchange - Part 44: Integrated generic resource: Product structure configuration (ISO 10303-44:2018, IDT)
- SS-ISO-10303-46 - Industrial automation systems and integration - Product data representation and exchange - Part 46: Integrated generic resource: Visual presentation (ISO 10303-46:2018, IDT)
- SS-ISO-10303-501 - Industrial automation systems and integration - Product data representation and exchange - Part 501: Application interpreted construct: Edge-based wireframe
- SS-ISO-10303-502 - Industrial automation systems and integration - Product data representation and exchange - Part 502: Application interpreted construct: Shell-based wireframe
- SS-ISO-10303-503 - Industrial automation systems and integration - Product data representation and exchange - Part 503: Application interpreted construct: Geometrically bounded 2D wireframe (ISO 10303-503:2000/Cor 1:2006, IDT)
- SS-ISO-10303-504 - Industrial automation systems and integration - Product data representation and exchange - Part 504: Application interpreted construct: Draughting annotation
- SS-ISO-10303-505 - Industrial automation systems and integration - Product data representation and exchange - Part 505: Application interpreted construct: Drawing structure and administration
- SS-ISO-10303-506 - Industrial automation systems and integration - Product data representation and exchange - Part 506: Application interpreted construct: Draughting elements
- SS-ISO-10303-510 - Industrial automation systems and integration - Product data representation and exchange - Part 510: Application interpreted construct: Geometrically bounded wireframe
- SS-ISO-10303-515 - Industrial automation systems and integration - Product data representation and exchange - Part 515: Application interpreted construct: Constructive solid geometry
- SS-ISO-10303-517 - Industrial automation systems and integration - Product data representation and exchange - Part 517: Application interpreted construct: Mechanical design geometric presentation - Technical Corrigendum 1
- SS-ISO-11783-2 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 2: Physical layer (ISO 11783-2:2019, IDT)
- SS-ISO-13399-1 - Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model (ISO 13399-1:2006, IDT)
- SS-ISO-13399-1-AM1 - Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model (ISO 13399-1:2006/Amd 1:2010, IDT)
- SS-ISO-15037-1 - Road vehicles - Vehicle dynamics test methods - Part 1: General conditions for passenger cars (ISO 15037-1:2019, IDT)
- SS-ISO-15836 - Information and documentation - The Dublin Core metadata element set (ISO 15836:2009/Cor 1:2009, IDT)
- SS-ISO-1816 - Continuous mechanical handling equipment for loose bulk materials and unit loads Belt conveyors Basic characteristics of motorized driving pulleys (ISO 1816:1975, IDT)
- SS-ISO-19101-2 - Geographic information - Reference model - Part 2: Imagery (ISO 19101-2:2018, IDT)
- SS-ISO-19103 - Geographic information - Conceptual schema language (ISO 19103:2015, IDT)
- SS-ISO-19104 - Geographic information - Terminology (ISO 19104:2016, IDT)
- SS-ISO-19106 - Geographic information - Profiles (ISO 19106:2004, IDT)
- SS-ISO-19107 - Geographic information - Spatial schema
- SS-ISO-19108 - Geographic information - Temporal schema
- SS-ISO-19109 - Geographic information - Rules for application schema (ISO 19109:2005, IDT)
- SS-ISO-19110 - Geographic information - Methodology for feature cataloguing (ISO 19110:2005, IDT)
- SS-ISO-19111 - Geographic information - Referencing by coordinates (ISO 19111:2019, IDT)
- SS-ISO-19112 - Geographic information - Spatial referencing by geographic identifiers
- SS-ISO-19113 - Geographic information - Quality principles
- SS-ISO-19114 - Geographic information - Quality evaluation procedures
- SS-ISO-19115 - Geographic information - Metadata
- SS-ISO-19115-2 - Geographic information - Metadata - Part 2: Extensions for imagery and gridded data (ISO 19115-2:2009, IDT)
- SS-ISO-19116 - Geographic information - Positioning services (ISO 19116:2004, IDT)
- SS-ISO-19117 - Geographic information - Portrayal (ISO 19117:2005, IDT)
- SS-ISO-19118 - Geographic information - Encoding (ISO 19118:2005, IDT)
- SS-ISO-19119 - Geographic information - Services (ISO 19119:2005, IDT)
- SS-ISO-19123 - Geographic information - Schema for coverage geometry and functions (ISO 19123:2005, IDT)
- SS-ISO-19125-1 - Geographic information - Simple feature access - Part 1: Common architecture (ISO 19125-1:2004, IDT)
- SS-ISO-19125-2 - Geographic information - Simple feature access - Part 2: SQL option (ISO 19125-2:2004, IDT)
- SS-ISO-19127 - Geographic information - Geodetic register (ISO 19127:2019, IDT)
- SS-ISO-19128 - Geographic information - Web map server interface (ISO 19128:2005, IDT)
- SS-ISO-19131 - Geographic information - Data product specifications (ISO 19131:2007, IDT)
- SS-ISO-19132 - Geographic information - Location Based Services - Reference model (ISO 19132:2007, IDT)
- SS-ISO-19133 - Geographic information - Location-based services - Tracking and navigation (ISO 19133:2005, IDT)
- SS-ISO-19134 - Geographic information - Location-based services - Multimodal routing and navigation (ISO 19134:2007, IDT)
- SS-ISO-19135 - Geographic information - Procedures for item registration (ISO 19135:2005, IDT)
- SS-ISO-19136 - Geographic information - Geography Markup Language, (GML) (ISO 19136:2007, IDT)
- SS-ISO-19136-2 - Geographic information - Geography Markup Language (GML) - Part 2: Extended schemas and encoding rules (ISO 19136-2:2015, IDT)
- SS-ISO-19137 - Geographic information - Core profile of the spatial schema (ISO 19137:2007, IDT)
- SS-ISO-19141 - Geographic information - Schema for moving features (ISO 19141:2008, IDT)
- SS-ISO-19143 - Geographic information - Filter encoding (ISO 19143:2010, IDT)
- SS-ISO-19144-2 - Geographic information - Classification systems - Part 2: Land Cover Meta Language (LCML) (ISO 19144-2:2012, IDT)
- SS-ISO-19149 - Geographic information - Rights expression language for geographic information - GeoREL (ISO 19149:2011, IDT)
- SS-ISO-19155 - Geographic information - Place Identifier (PI) architecture (ISO 19155:2012, IDT)
- SS-ISO-19155-2 - Geographic information - Place Identifier (PI) architecture - Part 2: Place Identifier (PI) linking (ISO 19155-2:2017, IDT)
- SS-ISO-19156 - Geographic information - Observations and measurements (ISO 19156:2011, IDT)
- SS-ISO-23247-1 - Automation systems and integration Digital twin framework for manufacturing Part 1: Overview and general principles (ISO 23247-1:2021, IDT)
- SS-ISO-23247-2 - Automation systems and integration Digital twin framework for manufacturing Part 2: Reference architecture (ISO 23247-2:2021, IDT)
- SS-ISO-23247-3 - Automation systems and integration Digital twin framework for manufacturing Part 3: Digital representation of manufacturing elements (ISO 23247-3:2021, IDT)
- SS-ISO-23247-4 - Automation systems and integration Digital twin framework for manufacturing Part 4: Information exchange (ISO 23247-4:2021, IDT)
- SS-ISO-26021-2 - Road vehicles - End-of-life activation of on-board pyrotechnic devices - Part 2: Communication requirements (ISO 26021-2:2008/Cor 1:2009, IDT)
- SS-ISO-6709 - Standard representation of geographic point location by coordinates (ISO 6709:2008, IDT)
- SS-ISO-6983-1 - Automation systems and integration - Numerical control of machines - Program format and definitions of address words - Part 1: Data format for positioning, line motion and contouring control systems (ISO 6983-1:2009, IDT)
- SS-ISO-7269 - Rubber - Determination of free sulfur
- SS-ISO-7628-2 - Road vehicles - Thermoplastics tubing for air braking system - Part 2: Mounting on vehicle and test methods
- SS-ISO-9506-1 - Industrial automation systems - Manufacturing Message Specification - Part 1: Service definition
- SS-ISO-9506-2 - Industrial automation systems - Manufacturing Message Specification - Part 2: Protocol specification
- SS-ISO-9506-3 - Industrial automation systems - Manufacturing message specification - Part 3: Companion standard for robotics - Amendment 2: Revision to conformance
- SS-ISO-9506-4 - Industrial automation systems - Manufacturing message specification - Part 4: Companion standard for numerical control