Document Center is acquired by Nimonik

Document Center List of Standards on Magnetic Storage Devices In General

ICS Code 35.220.20

Return to ICS Index.

Up to Level 2:

• 35.220 (Data storage devices)

The following documents are a part of this series:

BSI:

• BS-ISO-18923 - Imaging materials. Polyester-base magnetic tape. Storage practices
• BS-ISO/IEC-20919 - Information technology. Linear tape file system (LTFS) Format specification
• BS-ISO/IEC-9983 - Information processing systems. Designation of unrecorded flexible disk cartridges

ISO:

• ISO/IEC-11558 - Information technology - Data compression for information interchange - Adaptive coding with embedded dictionary - DCLZ Algorithm
• ISO/IEC-11576 - Information technology - Procedure for the registration of algorithms for the lossless compression of data
• ISO/IEC-12042 - Information technology - Data compression for information interchange - Binary arithmetic coding algorithm
• ISO/IEC-13346-1 - Information technology - Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange - Part 1: General
• ISO/IEC-13346-2 - Information technology -- Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange -- Part 2: Volume and boot block recognition
• ISO/IEC-13346-3 - Information technology -- Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange -- Part 3: Volume structure
• ISO/IEC-13346-4 - Information technology -- Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange -- Part 4: File structure
• ISO/IEC-13346-5 - Information technology - Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange - Part 5: Record structure
• ISO/IEC-20919 - Information technology - Linear tape file system (LTFS) Format specification
• ISO/IEC-22091 - Information technology - Streaming Lossless Data Compression algorithm (SLDC)

Other SDOs:

• SIS-4 - Information technology - European functional standards
• SS-15110 - Codes for the representation of names of countries
• SS-15111 - Codes for the representation of currencies and funds
• SS-28411 - Workplace atmospheres. Determination of mass concentration of hydrocarbons (IR-method)
• SS-30810 - Data representation - Bar code 3-of-9
• SS-30811 - Data representation - Bar code 2-of-5 interleaved
• SS-3298 - Fire fighting equipment - Fixed fire hose reels with non-collapsible hose
• SS-614314 - Identification cards - Identity card type ID-1. Amendment 1
• SS-614318 - Identification cards - Data format on identity card type ID-1 for bar coded data
• SS-614319 - Identification cards - Numbering system - Check number on identity card type ID-1
• SS-636112 - Programming languages - Pascal
• SS-636113 - Information processing systems - Computer graphics - Graphical Kernel System (GKS) functional description
• SS-636115 - Programming languages - Ada
• SS-636129 - Information processing - ISO 7-bit coded character set for information interchange
• SS-636132 - Information processing - Representation of the 7-bit coded character set on punched tape
• SS-636134 - Information processing - ISO 7-bit and 8-bit coded character sets - Code extension techniques
• SS-636139 - Information processing systems - Data communication - High-level data link control procedures - Frame structure
• SS-636145 - Data processing - Procedure for registration of escape sequences
• SS-636152 - Character repertoire and coded character sets forthe international teletex service
• SS-636154 - Information processing - ISO 7-bit and 8-bit coded character sets - Additional control functions for character-imaging devices
• SS-636155 - Information processing - Coded character sets fortext communication - Part 1: General introduction
• SS-636156 - Information processing - Coded character sets fortext communication - Part 2: Latin alphabetic andnon-alphabetic graphic characters
• SS-636213 - Data communication - High-level data link controlprocedures - Consolidation of elements of procedures
• SS-636230 - Data communication - 25 pin DTE/DCE interface connector and pin assignments
• SS-636232 - Data communication - 37-pin and 9-pin DTE/DCE interface connect and pin assignments
• SS-636233 - Data communication - 34 pin DTE/DCE interface connector and pin assignments
• SS-636260 - Information processing systems - Open Systems Interconnection - Basic Reference Model
• SS-636262 - Information processing systems - OpenSystems Interconnection - Connectionoriented transport protocol specification
• SS-636716 - Information processing - Unrecorded 12,7 mm (0.5 in) wide magnetic tape for information interchange- 32 ftpmm (800 tpi) NRZ1, 126 ftpmm (3 200 tpi) phase encoded and 356 ftpmm (9 042 ftpi) NRZ1
• SS-636717 - Interchangeable magnetic six-disk pack - Physicaland magnetic characteristics
• SS-636718 - Information processing - Interchangeable magneticsix-disk pack - Track format
• SS-636719 - Information processing - 9-track, 12,7 mm wide magnetic tape for information interchange recorded at 63 rpmm phase encoded
• SS-636721 - Information processing - Information interchange on 3,81 mm (0,150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1600 ftpi)
• SS-636722 - Information processing - Data interchange on 6,30mm (0,25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded
• SS-636723 - Information processing - Interchangeable magneticeleven-disk pack - Physical and magnetic characteristics
• SS-636724 - Information processing - Interchangeable magnetictwelve-disk pack (100 Mbytes)
• SS-636725 - Information processing - Interchangeable magnetictwelve-disk pack (200 Mbytes)
• SS-636726 - Information processing - Interchangeable magneticsingle-disk cartridge (top loaded) - Physical andmagnetic characteristics
• SS-636727 - Information processing - Interchangeable magneticsingle-disk cartridge (top loaded) - Track format
• SS-636730 - Information processing - Data interchange on 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad on one side - Part1: Dimensional, physical and magnetic characteristics
• SS-636731 - Information processing - Data interchange on 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on one side - Part 2: Track format
• SS-636732 - Information processing - Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, 1,9 tpmm (48 tpi), on both sides - Part 1: Dimensional, physical and magnetic characteristics
• SS-636733 - Information processing - Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, 1,9 tpmm (48 tpi), on both sides - Part 2: Track format
• SS-636734 - Information processing - Data interchange on 130 mm (5,25 in) flexible disk cartridges using two-frequency recording at 7958 ftprad, 1,9 tpmm (48 tpi), on one side - Part 1: Dimensional, physical andmagnetic characteristics
• SS-636735 - Information processing - Data interchange on 130 mm (5,25 in) flexible disk cartridges using two-frequency recording at 7958 ftprad, 1,9 tpmm (48 tpi), on one side - Part 2: Track format
• SS-636738 - Information processing - Self-loading cartridges for 12,7 mm (0,5 in) wide magnetic tape
• SS-636739 - Information processing - 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange -Format and recording, using group coding at 246 cpmm (6 250 cpi)
• SS-636801 - Information processing - File structure and labelling for magnetic tape for information interchange
• SS-636802 - Information processing - Magnetic tape cassette and cartridge labell and file structure for information interchange
• SS-636803 - Information processing - File structure and labelling of flexible disk cartridges for information interchage
• SS-663111 - Office machines - Minimum information to be included in specification sheets - Part 2: Document copying machines
• SS-672 - Technical drawings - Method of indicating surfacetexture
• SS-EN-1230-2 - Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint)
• SS-EN-13108-5 - Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
• SS-EN-13639 - Determination of total organic carbon in limestone
• SS-EN-21864 - Information processing - Unrecorded 12,7 mm wide magnetic tape for information interchange - 32 ftpmm NRZ1, 126 ftpmm phase encoded and 356 ftpmm NRZ1
• SS-EN-25652 - Information processing - 9-track, 12,7 mm wide magnetic tape for information interchange - Format and recording, using group at 246 cpmm
• SS-EN-26098 - Information processing - Selfloading cartridges for 12,7 (0,5 in) wide magnetic tape (ISO 6098:1984)
• SS-EN-27487-2 - Information processing - Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad,1,9 tpmm (48 tpi) on both sides - Part 2: Track format A (ISO 7487-2:1985)
• SS-EN-27487-3 - Information processing - Data interchange on 130 mm (5,25 in) flexible disk cartidges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi) on both sides - Part 3: Track format B (ISO 7487-3:1987)
• SS-EN-27487-3-AM1 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1,9 tpmm, on two sides - Part 3: Track format B (ISO 7487-3:1986, Technical Corrigendum 1:1991)
• SS-EN-28064 - Information processing - Reels for 12,7 mm (0.5 in) wide magnetic tapes - Sizes 16, 18 and 22 (ISO 8064:1985)
• SS-EN-28378-1 - Information processing - Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad,3,8 tpmm (96 tpi) on both sides - Part 1: Dimensional, physical and magnetic characteristics (ISO 8378-1:1
• SS-EN-28378-2 - Information processing - Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad,3,8 tpmm (96 tpi) on both sides - Part 2: Track format A (ISO 8378-2:1986)
• SS-EN-28378-3 - Information processing - Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad,3,8 tpmm (96 tpi) on both sides - Part 3: Track format B (ISO 8378-3:1986)
• SS-EN-28630-1 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks on each side - Part 1: Dimensional, physical and magnetic characteristics
• SS-EN-28630-2 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks on each side - Part 2: Track format A for 77 tracks
• SS-EN-28630-2-AM1 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks each side - Part 2: Track format A for 77 tracks. (ISO 8620-2:1987, Technical corrigendum 1:1992)
• SS-EN-28630-3 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 13226 ftprad, on 80 tracks on each side - Part 3: Track format B for 80 tracks
• SS-EN-28630-3-AM1 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks each side - Part 3: Track format B for 80 tracks. (ISO 8630-3:1987, Technical corrigendum 1:1992)
• SS-EN-28860-1 - Information processing - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modifiedfrequency modulation at 7 958 ftprad, 5,3 tpmm (135 tpi) on both sides - Part 1: Dimensional, physical and magnetic characteristics (ISO 8860-1:1987)
• SS-EN-28860-2 - Information processing - Data interchange on 90 mm (3,5 in) high density flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 5,3 tpmm (135 tpi) on both sides - Part 2: Track format (ISO 8860-2:1987)
• SS-EN-29293 - Information processing - Volume and file structure of flexible disk cartridges for information interchange (ISO 9293:1987)
• SS-EN-29529-1 - Information processing systems - Data interchangeon 90 mm flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side - Part 1: Dimensional, physical and magnetic characteristics
• SS-EN-29529-2 - Information processing systems - Data interchangeon 90 mm flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side - Part 2: Track format
• SS-EN-ISO-7487-1 - Information processing - Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1,9 tpmm (48 tpi), on both sides - ISO type 202 - Part 1: Dimensional, physical and magnetic characteristi
• SS-EN-ISO/IEC-9661 - Information technology - Datainterchange on 12,7 mm wide magnetic tape cartridges - 18 tracks, 1491data bytes per millimetre (ISO/IEC 9661:1994)
• SS-ENV-1292 - Identification card systems - Integrated circuit(s) cards and interface devices - Additional test methods
• SS-ENV-13481-6 - Railway applications - Track - Performance requirements for fastening systems - Part 6: Special fastening systems for attenuation of vibration
• SS-ISO-10777 - Information technology - 3,81 mm wide magnetic tape cartridge for information interchange - Helicalscan recording - DDS format
• SS-ISO-10994 - Information technology - Data interchange on 90 mm flexible disk cartridge using modified frequencymodulation recording at 31 831 ftprad on 80 tracks on each side - ISO type 303
• SS-ISO-11321 - Information technology - 3,81 mm wide magnetic tape cartridge for information interchange - Helicalscan recording - DATA/DAT format
• SS-ISO-11557 - Information technology - 3,81 mm wide magnetic tape cartridge for information interchange - Helicalscan recording - DDS-DC format using 60 m and 90 m length
• SS-ISO-11558 - Information technology - Data compression for information interchange - Adaptive coding with embedded dictionary - DCLZ-algorithm
• SS-ISO-12246 - Information technology - 8 mm wide magnetic tape cartridge dual azimuth format for information interchange - Helical scan recording
• SS-ISO-12247 - Information technology - 3,81 mm wide magnetic tape cartridge for information interchange - Helicalscan recording - DDS format using 60 m and 90 m length tapes
• SS-ISO-12248 - Information technology - 3,81 mm wide magnetic tape cartridge for information interchange - Helicalscan recording - DATA/DAT-DC format using 60 m and 90 m length tapes
• SS-ISO-13421 - Information technology - Data interchange on 12,7mm, 48-track magnetic tape cartridges - DLT 1 format
• SS-ISO-1863 - Information processing - 9-track, 12,7 mm wide magnetic tape for information interchange using NRZ1at 32 ftpmm - 32 cpmm
• SS-ISO-1864 - Information technology - Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange- 32 ftpmm (800 ftpi), NRZ 1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ 1
• SS-ISO-3788 - Information processing - 9-track, 12,7 mm wide magnetic tape for information interchange using phase encoding at 126 ftpmm - 63 cpmm
• SS-ISO-5652 - Information processing - 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange -Format and recording, using group coding at 246 cpmm (6 250 cpi)
• SS-ISO-6098 - Information processing - Self-loading cartridges for 12,7 mm (0,5 in) wide magnetic tape
• SS-ISO-7487-2 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1,9 tpmm, on both sides - Part 2: Track format A
• SS-ISO-7487-3 - Information processing - Data interchange on 130 mm flexible disk cartidiges using modified frequency modulation recording at 7958 ftprad, 1,9 tpmm, on two sides - Part 3: Track format B. Technical Corrigendum 1
• SS-ISO-8063-1 - Information processing - Data interchange on 6,30mm wide magnetic tape cartridge using IMFM recording at 252 ftpmm - Part 1: Mechanical, physical and magnetic properties
• SS-ISO-8063-2 - Information processing - Data interchange on 6,30mm wide magnetic tape cartridge using IMFM recording at 252 ftpmm - Part 2: Track format method of recording for data interchange in start/stop mode
• SS-ISO-8064 - Information processing - Reels for 12,7 mm (0.5 in) wide magnetic tapes - Sizes 16, 18 and 22 (ISO 8064:1985)
• SS-ISO-8378-1 - Information processing - Data interchange on 130 mm flexible disk cartridge using MFM recording at 7 958 ftprad - 3,8 tpmm on two sides - Part 1: Dimensional, physical and magnetic characteristics
• SS-ISO-8378-2 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 3,8 tpmm, on both sides - Part 2: Track format A
• SS-ISO-8378-3 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 3,8 tpmm, on both sides - Part 3: Track format B
• SS-ISO-8462-1 - Information processing - Data interchange on 6,30mm magnetic tape cartridge using GCR recording at394 ftpmm, 39 cpmm - Part 1: Mechanical, physicaland magnetic properties
• SS-ISO-8462-2 - Information processing - Data interchange on 6,30mm magnetic tape cartridge using GCR recording at394 ftpmm, 39 cpmm - Part 2: Streaming mode
• SS-ISO-8630-1 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side - Part 1: Dimensional, physical and magnetic characteristics
• SS-ISO-8630-2 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks on each side - Part 2: Track format A for 77 tracks - Technical corrigendum 1
• SS-ISO-8630-3 - Information processing - Data interchange on 130 mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks on each side - Part 3: Track format B for 80 tracks - Teechnical corrigendum 1
• SS-ISO-8860-1 - Information processing - Data interchange on 90 mm flexible disk cartidges using modified frequencymodulation recording at 7 958 ftprad on 80 trackson each side - Part 1: Dimensional, physical and magnetic characteristics
• SS-ISO-8860-2 - Information processing - Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side - Part 2: Track format
• SS-ISO-9293 - Information technology - Volume and file structure of disk cartridges for information interchange
• SS-ISO-9529-1 - Information processing systems - Data interchangeon 90 mm flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side - Part 1: Dimensional, physical and magnetic characteristics
• SS-ISO-9529-2 - Information processing systems - Data interchangeon 90 mm flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side - Part 2: Track format
• SS-ISO-9661 - Information processing - Data interchange on 12,7mm (0,5 in) wide magnetic tape cartridges - 18 tracks, 1491 data bytes per millimetre (37 871 data bytes per inch)