Document Center List of Standards on Power Transmission And Distribution Networks In General Powerline Telecommunications, See 33.040.60
ICS Code 29.240.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-5406-3 - Disturbances in supply systems caused by household appliances and similar electrical equipment
- BS-6436 - Specification for ground mounted distribution transformers for cable box or unit substation connection
- BS-7430 - Code of practice for protective earthing of electrical installations
- BS-7697 - Nominal voltages for low voltage public electricity supply systems
- BS-EN-50110-1 - Operation of electrical installations
- BS-EN-50110-1-TC - Tracked Changes. Operation of electrical installations
- BS-EN-50110-2 - Operation of electrical installations
- BS-EN-50110-2-TC - Tracked Changes. Operation of electrical installations
- BS-EN-50160 - Voltage characteristics of electricity supplied by public electricity networks
- BS-EN-50160-TC - Tracked Changes. Voltage characteristics of electricity supplied by public electricity networks
- BS-EN-50171-TC - Tracked Changes. Central safety power supply systems
- BS-EN-50178 - Electronic equipment for use in power installations
- BS-EN-60909-0 - Short-circuit currents in three-phase a.c. systems
- BS-EN-61557-1 - Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-11 - Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-12 - Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-13 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-14 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-15 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-2 - Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-3 - Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-4 - Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-5 - Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-6 - Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-7 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61557-8 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-61643-11 - Low-voltage surge protective devices
- BS-EN-61660-1 - Short-circuit currents in d.c auxiliary installations in power plants and substations
- BS-EN-61660-2 - Short-circuit currents in d.c. auxiliary installations in power plants and substations
- BS-EN-62110 - Electric and magnetic field levels generated by AC power systems. Measurement procedures with regard to public exposure
- BS-EN-62501 - Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission. Electrical testing
- BS-EN-62747-TC - Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems
- BS-EN-IEC-61557-1 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-12 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-12-TC - Tracked Changes. Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-17 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-1-TC - Tracked Changes. Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-2 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-2-TC - Tracked Changes. Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-3 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-3-TC - Tracked Changes. Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-4 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-4-TC - Tracked Changes. Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-5 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-5-TC - Tracked Changes. Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-6 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-6-TC - Tracked Changes. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-7 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-61557-7-TC - Tracked Changes. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures
- BS-EN-IEC-62751-2 - Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems
- BS-EN-IEC-63245-2 - Spatial wireless power transfer based on multiple magnetic resonances
- BS-IEC-60092-503-TC - Tracked Changes. Electrical installations in ships
- BS-IEC-61643-32 - Low-voltage surge protective devices
- BS-IEC-63152 - Smart cities. City service continuity against disasters. The role of the electrical supply
- BS-IEC-SRD-63199 - Top priority standards development status in the domain of smart energy
- PD-7639-1 - Short-circuit current calculation in three-phase a.c. systems
- PD-CLC-50586 - Open Smart Grid Protocol (OSGP)
- PD-CLC-50608 - Smart grid projects in Europe
- PD-CLC-50609 - Technical Guidelines for Radial HVDC Networks
- PD-CLC-50654-1 - HVDC Grid Systems and connected Converter Stations. Guideline and Parameter Lists for Functional Specifications
- PD-CLC-50654-2 - HVDC Grid Systems and connected Converter Stations. Guideline and Parameter Lists for Functional Specifications
- PD-CLC-61643-22 - Low-voltage surge protective devices
- PD-CLC-61643-22-TC - Tracked Changes. Low-voltage surge protective devices
- PD-IEC-61000-2-14 - Electromagnetic compatibility (EMC)
- PD-IEC-61000-2-15 - Electromagnetic compatibility
- PD-IEC-62195 - Power System Control & Associated Communications, Deregulated Energy Market Communicat
- PD-IEC-62672 - Reliability and availability evaluation of HVDC systems
- PD-IEC-62672-1 - Reliability and availability evaluation of HVDC systems
- PD-IEC-62672-TC - Tracked Changes. Reliability and availability evaluation of HVDC systems
- PD-IEC-62786 - Distributed energy resources connection with the grid
- PD-IEC-62786-1 - Distributed energy resources connection with the grid
- PD-IEC-62786-3 - Distributed energy resources connection with the grid
- PD-IEC-62898-1 - Microgrids
- PD-IEC-62898-2 - Microgrids
- PD-IEC-62898-3-1 - Microgrids
- PD-IEC-62898-3-2 - Microgrids
- PD-IEC-62898-3-3 - Microgrids
- PD-IEC-62898-3-4 - Microgrids
- PD-IEC-62898-4 - Microgrids
- PD-IEC-62978 - HVDC installations. Guidelines on asset management
- PD-IEC-63014-1 - High voltage direct current (HVDC) power transmission. System requirements for DC-side equipment
- PD-IEC-63042-100 - UHV AC transmission systems
- PD-IEC-63042-101 - UHV AC transmission systems
- PD-IEC-63042-102 - UHV AC transmission systems
- PD-IEC-63042-201 - UHV AC transmission systems
- PD-IEC-63042-301 - UHV AC transmission systems
- PD-IEC-63042-302 - UHV AC transmission systems
- PD-IEC-63065 - Guidelines for operation and maintenance of line commutated converter (LCC) HVDC converter station
- PD-IEC-63097 - Smart grid standardization roadmap
- PD-IEC-63127 - Guideline for the system design of HVDC converter stations with line-commutated converters
- PD-IEC-63189-2 - Virtual Power Plants
- PD-IEC-63291-1 - High voltage direct current (HVDC) grid systems and connected converter stations. Guideline and parameter lists for functional specifications
- PD-IEC-63291-2 - High voltage direct current (HVDC) grid systems and connected converter stations. Guideline and parameter lists for functional specifications
- PD-IEC-63336 - Commissioning of VSC HVDC systems
- PD-IEC-63363-1 - Performance of voltage sourced converter (VSC) based high-voltage direct current (HVDC) transmission
- PD-IEC-63410 - Decentralized electrical energy systems roadmap
- PD-IEC-63471 - DC voltages for HVDC grids
- PD-IEC-TS-63042-301 - UHV AC transmission systems
IEC:
- IEC-60050-601-AM2 - Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
- IEC-60050-631 - International Electrotechnical Vocabulary (IEV) - Part 631: Electrical energy storage systems
- IEC-61000-2-15 - Electromagnetic compatibility - Part 2-15: Description of the characteristics of networks with high penetration of power electronic converters
- IEC-61557-1 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
- IEC-61557-10 - Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring and monitoring of protective measures
- IEC-61557-11 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCM) in TT, TN and IT systems
- IEC-61557-11-RL - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCM) in TT, TN and IT systems
- IEC-61557-12 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD)
- IEC-61557-12-RL - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD)
- IEC-61557-13 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems
- IEC-61557-14 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
- IEC-61557-15 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
- IEC-61557-17 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 17: Non-contact AC voltage indicators
- IEC-61557-1-RL - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
- IEC-61557-2 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance
- IEC-61557-2-RL - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance
- IEC-61557-3 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
- IEC-61557-3-RL - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
- IEC-61557-4 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding
- IEC-61557-4-RL - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding
- IEC-61557-5 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth
- IEC-61557-5-RL - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth
- IEC-61557-6 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems
- IEC-61557-6-RL - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems
- IEC-61557-7 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence
- IEC-61557-7-AM1 - Amendment 1 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence
- IEC-61557-7-RL - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence
- IEC-61557-8 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
- IEC-61643-03 - Low-voltage surge protective devices - Part 03: SPD Testing Guide
- IEC-61643-22 - Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles
- IEC-61643-31 - Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for photovoltaic installations
- IEC-61643-32 - Low-voltage surge protective devices - Part 32: Surge protective devices connected to the d.c. side of photovoltaic installations - Selection and application principles
- IEC-62672 - Reliability and availability evaluation of HVDC systems
- IEC-62672-1 - Reliability and availability evaluation of HVDC systems Part 1 HVDC systems with line commutated converters
- IEC-62786 - Distributed energy resources connection with the grid
- IEC-62898-1 - Microgrids - Part 1: Guidelines for microgrid projects planning and specification
- IEC-62898-1-AM1 - Amendment 1 - Microgrids - Part 1: Guidelines for microgrid projects planning and specification
- IEC-62898-2 - Microgrids - Part 2: Guidelines for operation
- IEC-62898-2-AM1 - Amendment 1 - Microgrids - Part 2: Guidelines for operation
- IEC-62898-3-1 - Microgrids - Part 3-1: Technical requirements - Protection and dynamic control
- IEC-62898-3-1-AM1 - Amendment 1 - Microgrids - Part 3-1: Technical requirements - Protection and dynamic control
- IEC-62898-3-2 - Microgrids - Part 3-2: Technical requirements - Energy management systems
- IEC-62898-3-3 - Microgrids - Part 3-3: Technical requirements - Self-regulation of dispatchable loads
- IEC-62898-3-4 - Microgrids - Part 3-4: Technical requirements - Microgrid monitoring and control systems
- IEC-62898-4 - Microgrids - Part 4: Use cases
- IEC-62978 - HVDC installations - Guidelines on asset management
- IEC-63014-1 - High voltage direct current (HVDC) power transmission - System requirements for DC-side equipment - Part 1: Using line-commutated converters
- IEC-63042-100 - UHV AC transmission systems - Part 100: General information
- IEC-63042-101 - UHV AC transmission systems - Part 101: Voltage regulation and insulation design
- IEC-63042-102 - UHV AC transmission systems - Part 102: General system design
- IEC-63042-201 - UHV AC transmission systems - Part 201: UHV AC substation design
- IEC-63042-301 - UHV AC transmission systems - Part 301: On-site acceptance tests
- IEC-63042-302 - UHV AC transmission systems - Part 302: Commissioning
- IEC-63060 - Electric energy supply networks - General aspects and methods for the maintenance of installations and equipment
- IEC-63065 - Guidelines for operation and maintenance of line commutated converter (LCC) HVDC converter station
- IEC-63065-AM1 - Amendment 1 - Guidelines for operation and maintenance of line commutated converter (LCC) HVDC converter station
- IEC-63127 - Guideline for the system design of HVDC converter stations with line-commutated converters
- IEC-63127-AM1 - Amendment 1 - Guideline for the system design of HVDC converter stations with line-commutated converters
- IEC-63152 - Smart cities - City service continuity against disasters - The role of the electrical supply
- IEC-63179-1 - Guideline for planning of HVDC systems - Part 1: HVDC systems with line-commutated converters
- IEC-63189-1 - Virtual power plants - Part 1: Architecture and functional requirements
- IEC-63189-2 - Virtual Power Plants - Part 2: Use Cases
- IEC-63291-1 - High voltage direct current (HVDC) grid systems and connected converter stations - Guideline and parameter lists for functional specifications - Part 1: Guideline
- IEC-63291-2 - High voltage direct current (HVDC) grid systems and connected converter stations - Guideline and parameter lists for functional specifications - Part 2: Parameter lists
- IEC-63336 - Commissioning of VSC HVDC systems
- IEC-63383 - Cybersecurity aspects of devices used for power metering and monitoring, power quality monitoring, data collection and analysis
- IEC-63410 - Decentralized electrical energy systems roadmap
Other SDOs:
- BS-EN-IEC-62501-TC - Tracked Changes. Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission. Electrical testing
- EN-50110-1 - Operation of electrical installations - Part 1: General requirements
- EN-50110-2 - Part 2: National Annexes, Operation of Electrical Installations
- EN-50160 - Voltage characteristics of electricity supplied by public electricity networks
- EN-61557-1 - Electrical Safety in Low Voltage Distribution Systems Up To 1000 V a.C. & 1500 V D.C.
- EN-61557-10 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures
- EN-61557-11 - Electrical Safety in Low Voltage Distribution Systems Up To 1000 V a.C. & 1500 V D.C.
- EN-61557-12 - Electrical Safety in Low Voltage Distribution Systems Up To 1000 V a.C. & 1500 V D.C.
- EN-61557-13 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems
- EN-61557-14 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
- EN-61557-15 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
- EN-61557-2 - Electrical Safety in Low Voltage Distribution Systems Up To 1000 V a.C. & 1500 V D.C.
- EN-61557-3 - Electrical Safety in Low Voltage Distribution Systems Up To 1000 V a.C. & 1500 V D.C.
- EN-61557-4 - Electrical Safety in Low Voltage Distribution Systems Up To 1000 V a.C. & 1500 V D.C.
- EN-61557-5 - Electrical Safety in Low Voltage Distribution Systems Up To 1000 V a.C. & 1500 V D.C.
- EN-61557-6 - Electrical Safety in Low Voltage Distribution Systems Up To 1 000 V a.C. & 1 500 V D.
- EN-61557-7 - Electrical Safety in Low Voltage Distribution Systems Up To 1000 V a.C. & 1500 V D.C.
- EN-61557-8 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
- EN-61660-1 - Part 1: Calculation of Short-Circuit Currents, Short-Circuit Currents - Short-Circuit
- EN-61660-2 - Short-Circuit Currents in D.C. Auxiliary Installations in Power Plants & Substations,
- EN-62110 - Electric & Magnetic Field Levels Generated by Ac Power Systems - Measurement Procedure
- SS-EN-61000-3-3 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current = 16 A per phase and not subject to conditional connection