Document Center List of Standards on Relays
ICS Code 29.120.70
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-1659 - Specification for tractive armature direct current neutral track and line relays for railway signalling
- BS-1745 - Specification for alternating-current relays for railway signalling: track relays (double-element, 2-position), line relays (single-element, 2-position)
- BS-519 - Specification for tractive armature direct current neutral-polar line relays for railway signalling
- BS-5266-3 - Emergency lighting. Specification for small power relays (electromagnetic) for emergency lighting applications up to and including 32 A
- BS-561 - Specification for alternating-current line relays double-element 3-position (for railway signalling)
- BS-5992-1 - Electrical Relays, Specification for Contact Performance of Electrical Relays
- BS-5992-4 - Electrical relays. Specification for contact loads of preferred values used in endurance tests for electrical relay contacts
- BS-5992-5 - Electrical relays. Specification for test equipment used in endurance tests for electrical relay contacts
- BS-5992-6 - Electrical relays
- BS-9150 - Specification for electrical relays of assessed quality: generic data and methods of test
- BS-9153 - Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality primarily intended for telecommunication applications. Full and basic assessment levels
- BS-CECC-16000 - Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays
- BS-CECC-16000-1 - Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays
- BS-EN-116000-1 - Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. General
- BS-EN-116200 - Harmonized system of quality assessment for electronic components. Sectional specification. Electromechanical all-or-nothing relays (including relays for severe environmental conditions)
- BS-EN-116500 - Harmonized system of quality assessment for electronic components. Sectional specification: electromechanical all-or-nothing TELECOM relays of assessed quality
- BS-EN-116501 - Harmonized system of quality assessment for electronic components. Blank detail specification. Electromechanical all-or-nothing TELECOM relays of assessed quality
- BS-EN-116502 - Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical all-or-nothing TELECOM relays of assessed quality, dual-in-line, with 20mm x 10mm base
- BS-EN-116503 - Harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical all-or-nothing TELECOM relays of assessed quality, dual-in-line, with 14mm x 9mm base
- BS-EN-116504 - Harmonized system of quality assessment for electronic components. Blank detail specification. Electromechanical all-or-nothing TELECOM relays of assessed quality, dual-in-line, with 15 mm x 7,5 mm base, 2 change-over contacts
- BS-EN-117000 - Harmonized system of quality assessment for electronic components. Generic specification. Solid state all-or-nothing relays. Generic data and methods of test
- BS-EN-50205 - Relays with forcibly guided (mechanically linked) contacts
- BS-EN-50216-3 - Power transformer and reactor fittings
- BS-EN-50263 - Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipment
- BS-EN-60255-1 - Measuring relays and protection equipment
- BS-EN-60255-1-00 - Electrical relays. All-or-nothing electrical relays
- BS-EN-60255-11 - Measuring relays and protection equipment
- BS-EN-60255-121 - Measuring relays and protection equipment
- BS-EN-60255-127 - Measuring relays and protection equipment
- BS-EN-60255-149 - Measuring relays and protection equipment
- BS-EN-60255-151 - Measuring relays and protection equipment
- BS-EN-60255-22-1 - Measuring relays and protection equipment
- BS-EN-60255-22-2 - Measuring relays and protection equipment
- BS-EN-60255-22-3 - Measuring relays and protection equipment
- BS-EN-60255-22-4 - Measuring relays and protection equipment
- BS-EN-60255-22-5 - Measuring relays and protection equipment
- BS-EN-60255-22-6 - Electrical relays. Electrical disturbance tests for measuring relays and protection equipment
- BS-EN-60255-22-7 - Electrical relays. Electrical disturbance tests for measuring relays and protection equipment
- BS-EN-60255-23 - Electrical Relays, Contact Performance
- BS-EN-60255-24 - Electrical relays
- BS-EN-60255-25 - Electrical relays
- BS-EN-60255-26 - Measuring relays and protection equipment
- BS-EN-60255-27 - Measuring relays and protection equipment
- BS-EN-60255-3 - Electrical Relays, Single Input Energizing Quantity Measuring Relays With Dependent Or
- BS-EN-60255-5 - Electrical relays
- BS-EN-60255-6 - Electrical relays
- BS-EN-60255-8 - Electrical relays
- BS-EN-61810-1 - Electromechanical elementary relays
- BS-EN-61810-2 - Electromechanical elementary relays
- BS-EN-61810-2-1 - Electromechanical elementary relays
- BS-EN-61810-2-1-TC - Tracked Changes. Electromechanical elementary relays
- BS-EN-61810-2-TC - Tracked Changes. Electromechanical elementary relays
- BS-EN-61810-3 - Electromechanical elementary relays
- BS-EN-61810-5 - Electromechanical non-specified time all-or-nothing relays. Insulation coordination
- BS-EN-61810-7 - Electromechanical elementary relays
- BS-EN-61811-1 - Electromechanical telecom elementary relays of assessed quality
- BS-EN-61811-10 - Electromechanical all-or-nothing relays
- BS-EN-61811-11 - Electromechanical all-or-nothing relays
- BS-EN-61811-50 - Electromechanical all-or-nothing relays
- BS-EN-61811-51 - Electromechanical all-or-nothing relays
- BS-EN-61811-52 - Electromechanical all-or-nothing relays
- BS-EN-61811-53 - Electromechanical all-or-nothing relays
- BS-EN-61811-54 - Electromechanical non-specified time all-or-nothing relays of assessed quality
- BS-EN-61811-55 - Electromechanical non-specified time all-or-nothing relays of assessed quality
- BS-EN-61812-1 - Time relays for industrial and residential use
- BS-EN-62246-1 - Reed switches
- BS-EN-62246-1-1 - Reed switches
- BS-EN-62246-2 - Reed Contact Units, Heavy-Duty Reed Switches
- BS-EN-62314 - Solid-state relays
- BS-EN-IEC-60255-181 - Measuring relays and protection equipment
- BS-EN-IEC-60255-187-1 - Measuring relays and protection equipment
- BS-EN-IEC-60255-1-TC - Tracked Changes. Measuring relays and protection equipment
- BS-EN-IEC-61810-10 - Electromechanical elementary relays
- BS-EN-IEC-61810-4 - Electromechanical elementary relays
- BS-EN-IEC-62246-1-1 - Reed switches
- BS-EN-IEC-62246-1-1-TC - Tracked Changes. Reed switches
- BS-IEC-60255-1 - Measuring relays and protection equipment. Common requirements
- BS-IEC-62246-2 - Reed Contact Units, Heavy-Duty Reed Switches
- BS-IEC/IEEE-60255-118-1 - Measuring relays and protection equipment
- BS-QC-160100 - Harmonized system of quality assessment for electronic components. Electrical relays. Sectional specification: electromechanical all-or-nothing relays
- BS-QC-160101 - Specification for harmonized system of quality assessment for electronic components. Electrical relays. Blank detail specification. Electromechanical all-or-nothing relays. Test schedules 1, 2 and 3
- DD-CLC-50537-4 - Railway applications. Mounted parts of the traction transformer and cooling system
- DD-IEC/PAS-62246-2-1 - Reed contact unitsHeavy-duty reed switches. Quality assessment specification
- PD-IEC-62246-3 - Reed switches
- PD-IEC-62711 - Mnemonics and designations of symbols for measuring relays, instruments and related device
IEC:
- IEC-255-12 - Electrical relays - Part 12: Directional relays and power relays with two input energizing quantities
- IEC-255-13 - Electrical relays - Part 13: Biased (percentage) differential relays
- IEC-255-21-1 - Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section One: Vibration tests (sinusoidal)
- IEC-255-21-2 - Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section Two: Shock and bump tests
- IEC-255-21-3 - Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests
- IEC-60050-444 - International Electrotechnical Vocabulary - Part 444: Elementary relays
- IEC-60050-445 - International Electrotechnical Vocabulary - Part 445: Time relays
- IEC-60050-447 - International Electrotechnical Vocabulary (IEV) - Part 447: Measuring relays and protection equipment
- IEC-60255-1 - Measuring relays and protection equipment - Part 1: Common requirements
- IEC-60255-11 - Part 11: Voltage Dips, Short Interruptions, Variations & Ripple on Auxiliary Power Sup
- IEC-60255-121 - Measuring relays and protection equipment - Part 121: Functional requirements for distance protection
- IEC-60255-127 - Measuring relays and protection equipment - Part 127: Functional requirements for over/under voltage protection
- IEC-60255-149 - Measuring relays and protection equipment - Part 149: Functional requirements for thermal electrical relays
- IEC-60255-151 - Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection
- IEC-60255-181 - Measuring relays and protection equipment - Part 181: Functional requirements for frequency protection
- IEC-60255-187-1 - Measuring relays and protection equipment - Part 187-1: Functional requirements for differential protection - Restrained and unrestrained differential protection of motors, generators and transformers
- IEC-60255-187-AM1 - Measuring relays and protection equipment - Part 187-1: Functional requirements for differential protection - Restrained and unrestrained differential protection of motors, generators and transformers
- IEC-60255-22-1 - Part 22-1: Electrical Distrubance Tests - 1 Mhz Burst Immunity Tests, Measuring Relays
- IEC-60255-22-2 - Part 22-2: Electrical Disturbance Tests - Electrostatic Discharge Tests, Measuring Rel
- IEC-60255-22-3 - Part 22-3: Electrical Disturbances Tests - Radiated Electromagnetic Field Immunity, Me
- IEC-60255-22-4 - Part 22-4: Electrical Disturbance Tests - Electrical Fast Transient/Burst Immunity Tes
- IEC-60255-22-5 - Part 22-5: Electrical Disturbance Tests - Surge Immunity Test, Measuring Relays & Prot
- IEC-60255-22-6 - Part 22-6: Electrical Disturbance Tests for Measuring Relays& Protection Equipment - Immu
- IEC-60255-22-7 - Part 22-7: Electrical Disturbance Tests for Measuring Relays& Protection Equipment - Powe
- IEC-60255-24 - Measuring relays and protection equipment - Part 24: Common format for transient data exchange (COMTRADE) for power systems
- IEC-60255-25 - Part 25: Electromagnetic Emission Tests for Measuring Relays& Protection Equipment, Elect
- IEC-60255-26 - Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements
- IEC-60255-27 - Measuring relays and protection equipment - Part 27: Product safety requirements
- IEC-60255-27 CMV - Measuring relays and protection equipment - Part 27: Product safety requirements
- IEC-60255-5 - Part 5: Insulation Coordination for Measuring Relays & Protection Equipment, Electrical Re
- IEC-61810-1 - Electromechanical elementary relays - Part 1: General and safety requirements
- IEC-61810-10 - Electromechanical elementary relays - Part 10: Additional functional aspects and safety requirements for high-capacity relays
- IEC-61810-1-AM1 - Amendment 1 - Electromechanical elementary relays - Part 1: General and safety requirements
- IEC-61810-2 - Electromechanical elementary relays - Part 2: Reliability
- IEC-61810-2-1 - Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values
- IEC-61810-3 - Electromechanical elementary relays - Part 3: Relays with forcibly guided (mechanically linked) contacts
- IEC-61810-4 - Electromechanical elementary relays - Part 4: General and safety requirements for reed relays
- IEC-61810-7 - Part 7: Test & Measurement Procedures, Electromechanical Elementary Relays
- IEC-618110-2-1 - Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values
- IEC-61811-1 - Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification
- IEC-61811-10 - Part 10: Sectional Specification - Relays for Industrial Application, Electromechanical El
- IEC-61811-11 - Part 11: Blank Detail Specification - Relays for Industrialapplication, Electromechanica
- IEC-61811-50 - Part 50: Sectional Specification - Electromechanical All-Or-Nothing Telecom Relays of ASSE
- IEC-61811-51 - Part 51: Blank Detail Specification - Electromechanical All-Or-Nothing Telecom Relays of A
- IEC-61811-52 - Part 52: Blank Detail Specification - Electromechanical All-Or-Nothing Telecom Relays of A
- IEC-61811-53 - Part 53: Blank Detail Specification - Electromechanical All-Or-Nothing Telecom Relays of A
- IEC-61811-54 - Part 54: Blank Detail Specification - Electromechanical All-Or-Nothing Telecom Relays of A
- IEC-61811-55 - Part 55: Blank Detail Specification - Electromechanical All-Or-Nothing Telecom Relays of A
- IEC-61812-1 - Time relays for industrial and residential use - Part 1: Requirements and tests
- IEC-62246-1 - Reed switches - Part 1: Generic specification
- IEC-62246-1-1 - Reed switches - Part 1-1: Generic specification - Blank detail specification
- IEC-62246-2 - Part 2: Heavy-Duty Reed Switches, Reed Contact Units
- IEC-62246-3 - Reed switches . Part 3: Reliability data for reed switch-devices in typical safety applications
- IEC-62246-4 - Reed switches . Part 4: Application in conjunction with magnetic actuator used for magnetic sensing devices
- IEC-62314 - Solid-state relays - Safety requirements
- IEC/IEEE-60255-118-1 - Measuring relays and protection equipment - Part 118-1: Synchrophasor for power systems - Measurements
- IEC/PAS-61810-2-1 - Part 2-1: Reliability - Procedure for the Verification of B10 Values, Electromechanica
- IEC/PAS-62246-2-1 - Part 2-1: Heavy-Duty Reed Switches - Quality Assessment Specification, Reed Contact Un
Other SDOs:
- EN-116200 - Harmonized System of Quality Assessment for Electronic Components, Sectional Specifica
- EN-117000 - Harmonized System of Quality Assessment for Electronic Components, Generic Specificati
- EN-60255-1 - Part 1: Common Requirements, Measuring Relays & Protection Equipment
- EN-60255-11 - Part 11: Voltage Dips, Short Interruptions, Variations & Ripple on Auxiliary Power Sup
- EN-60255-121 - Measuring relays and protection equipment - Part 121: Functional requirements for distance protection
- EN-60255-127 - Measuring relays and protection equipment - Part 127: Functional requirements for over/under voltage protection
- EN-60255-149 - Measuring relays and protection equipment - Part 149: Functional requirements for thermal electrical relays
- EN-60255-151 - Measuring Relays & Protection Equipment, Functional Requirements for Over/Under Curren
- EN-60255-22-1 - Measuring Relays & Protection Equipment, Electrical Disturbances Tests, 1 Mhz Burst Im
- EN-60255-22-2 - Measuring Relays & Protection Equipment, Electrical Disturbance Tests, Electrostatic D
- EN-60255-22-3 - Measuring Relays & Protection Equipment, Electrical Disturbance Tests, Radiated Electr
- EN-60255-22-4 - Electrical Disturbance Tests for Measuring Relays & Protection Equipment. Electrical F
- EN-60255-22-5 - Measuring relays and protection equipment - Part 22-5: Electrical disturbance tests - Surge immunity test
- EN-60255-26 - Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements
- EN-60255-27 - Measuring relays and protection equipment - Part 27: Product safety requirements
- EN-61810-1 - Electromechanical elementary relays - Part 1: General and safety requirements
- EN-61810-2 - Electromechanical elementary relays - Part 2: Reliability
- EN-61810-2-1 - Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values
- EN-61810-3 - Electromechanical elementary relays - Part 3: Relays with forcibly guided (mechanically linked) contacts
- EN-61810-7 - Electromechanical Elementary Relays, Test & Measurement Procedures
- EN-61811-1 - Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification
- EN-61811-50 - Electromechanical All-Or-Nothing Relays, Sectional Specification, Electromechanical Al
- EN-61811-51 - Electromechanical All-Or-Nothing Relays, Blank Detail Specification, Electromechanical
- EN-61811-55 - Electromechanical Non-Specified Time All-Or-Nothing Relays of Assessed Quality, Blank
- EN-61812-1 - Time relays for industrial and residential use - Part 1: Requirements and tests
- EN-62246-1 - Reed switches - Part 1: Generic specification
- EN-62246-1-1 - Reed switches - Part 1-1: Generic specification - Quality assessment
- EN-62246-2 - Reed Contact Units, Heavy-Duty Reed Switches
- EN-62314 - Solid-State Relays
- EN-IEC-60255-181 - Measuring relays and protection equipment - Part 181: Functional requirements for frequency protection (IEC 60255-181:2019)
- EN-IEC-62246-1-1 - Reed switches - Part 1-1: Generic specification - Blank detail specification
- SS-ISO-2315 - Aircraft - Two- and four-pole sealed electromagnetic relays, 2 A and 3 A - Clearance and fixing dimensions