Document Center List of Standards on Enamels
ICS Code 25.220.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-B1000 - Standard Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry
- ASTM-B916 - Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
- ASTM-C1192 - Standard Practice for Safe Spraying of Ceramic Glazes (Withdrawn 1999)
- ASTM-C1203 - Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
- ASTM-C282 - Standard Test Method for Acid Resistance of Porcelain Enamels
(Citric Acid Spot Test) - ASTM-C283 - Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid
- ASTM-C285 - Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
- ASTM-C286 - Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
- ASTM-C372 - Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
- ASTM-C374 - Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
- ASTM-C375 - Standard Classification of Water Used in Milling of Porcelain Enamel
- ASTM-C385 - Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
- ASTM-C409 - Test Method for Torsion Resistance of Laboratory Specimens of Porcelain Enameled Iron and Steel (Withdrawn 1988)
- ASTM-C448 - Standard Test Methods for Abrasion Resistance of Porcelain Enamels
- ASTM-C536 - Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
- ASTM-C537 - Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
- ASTM-C538 - Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels (Withdrawn 2023)
- ASTM-C539 - Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
- ASTM-C614 - Standard Test Method for Alkali Resistance of Porcelain Enamels
- ASTM-C632 - Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
- ASTM-C703 - Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
- ASTM-C743 - Standard Test Method for Continuity of Porcelain Enamel Coatings
- ASTM-C774 - Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
- ASTM-C824 - Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
- ASTM-C839 - Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
- ASTM-C988 - Test Method for Adherence of Porcelain Enamel Cover Coats Direct-to-Steel (Withdrawn 1990)
- ASTM-D1543 - Method of Test for Color Permanence of White Architectural Enamels (Withdrawn 1990)
- ASTM-D3288 - Standard Test Methods for Magnet-Wire Enamels
- ASTM-D7786 - Standard Test Method for Determining Enamel Holdout
- ASTM-ES20 - Test Method for Calibration of Upright Cylindrical Tanks Using Optical Reference Line Method (Withdrawn 1994)
BSI:
- BS-1344-1 - Methods of testing vitreous enamel finishes. Determination of resistance to thermal shock of coatings on articles other than cooking utensils and fabricated sheet steel components
- BS-1344-10 - Methods of Testing Vitreous Enamel Finishes, Determination of Resistance To Condensing
- BS-1344-11 - Methods of testing vitreous enamel finishes. High voltage test for enamelled articles for service under highly corrosive conditions
- BS-1344-12 - Methods of testing vitreous enamel finishes
- BS-1344-13 - Methods of testing vitreous enamel finishes. Production of specimens for testing coatings on cast iron
- BS-1344-14 - Methods of Testing Vitreous Enamel Finishes, Apparatus for Testing With Acid and Neutral
- BS-1344-15 - Apparatus for Testing With Alkaline Liquids
- BS-1344-16 - Methods of testing vitreous enamel finishes
- BS-1344-17 - Methods of Testing Vitreous Enamel Finishes, Resistance To Hot Sodium Hydroxide Soluti
- BS-1344-18 - Methods of testing vitreous enamel finishes. Determination of fluidity behaviour: fusion flow test
- BS-1344-2 - Methods of Testing Vitreous Enamel Finishes, Resistance To Citric Acid at Room Tempera
- BS-1344-21 - Methods of testing vitreous enamel finishes
- BS-1344-22 - Methods of testing vitreous enamel finishes
- BS-1344-4 - Methods of testing vitreous enamel finishes
- BS-1344-5 - Methods of Testing Vitreous Enamel Finishes, Determination of Resistance To Hot Deterg
- BS-1344-6 - Resistance To Alkali
- BS-1344-7 - Methods of testing vitreous enamel finishes
- BS-1344-8 - Methods of Testing Vitreous Enamel Finishes, Determination of Resistance To Boiling CI
- BS-1344-9 - Methods of testing vitreous enamel finishes
- BS-3831 - Specification for vitreous enamel finishes for domestic and catering appliances
- BS-4479-8 - Design of articles that are to be coated. Recommendations for vitreous enamel coatings
- BS-7371-10 - Coatings on metal fasteners
- BS-7793-1 - Vitreous enamel coatings for use on bolted steel panels
- BS-7793-2 - Vitreous enamel coatings for use on bolted steel panels. Specification for coatings on bolted steel panels for use in industrial liquid storage tanks
- BS-7873 - Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes
- BS-7957 - Vitreous Enamel Systems - Determination of Self-Cleaning Properties
- BS-EN-14430 - Vitreous and porcelain enamels. High voltage test
- BS-EN-14431 - Vitreous and porcelain enamels. Characteristics of the enamel coatings applied to steel panels intended for architecture
- BS-EN-14483-1 - Vitreous & Porcelain Enamels, Determination of Resistance To Chemical Corrosion, Deter
- BS-EN-14483-2 - Vitreous & Porcelain Enamels, Determination of Resistance To Chemical Corrosion, Deter
- BS-EN-14483-3 - Vitreous and porcelain enamels. Determination of resistance to chemical corrosion
- BS-EN-14483-4 - Vitreous & Porcelain Enamels, Determination of Resistance To Chemical Corrosion, Deter
- BS-EN-14483-5 - Vitreous & Porcelain Enamels, Determination of Resistance To Chemical Corrosion, Deter
- BS-EN-14863 - Vitreous & Porcelain Enamels, Determination of the Edge Covering of Enamelled Steel Pl
- BS-EN-14864 - Vitreous & Porcelain Enamels, Enamel Coatings Applied To Steel for Writing Surfaces, S
- BS-EN-14866 - Vitreous & Porcelain Enamels, Regenerative, Enamelled & Packed Panels for Air-Gas & Ga
- BS-EN-15159-1 - Vitreous & Porcelain Enamels, Glass-Lined Apparatus for Process Plants, Quality Requir
- BS-EN-15159-2 - Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Designation and specification of resistance to chemical attack and thermal shock
- BS-EN-15159-3 - Vitreous and porcelain enamels. Glass-lined apparatus for process plants
- BS-EN-15206 - Vitreous and porcelain enamels. Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron
- BS-EN-15282 - Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
- BS-EN-15711 - Vitreous and porcelain enamels. Glass lined flanged steel pipes and flanged steel fittings. Quality requirements
- BS-EN-15771 - Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale
- BS-EN-15826 - Vitreous and porcelain enamels. Terminology
- BS-EN-ISO-11177 - Vitreous and porcelain enamels. Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply. Quality requirements and testing
- BS-EN-ISO-13805 - Vitreous and porcelain enamels for aluminium. Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
- BS-EN-ISO-13807 - Vitreous and porcelain enamels. Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
- BS-EN-ISO-15695 - Vitreous and porcelain enamels. Determination of scratch resistance of enamel finishes
- BS-EN-ISO-19496-1 - Vitreous and porcelain enamels. Terminology
- BS-EN-ISO-19496-2 - Vitreous and porcelain enamels. Terminology
- BS-EN-ISO-20274 - Vitreous and porcelain enamels. Preparation of samples and determination of thermal expansion coefficient
- BS-EN-ISO-2178 - Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method
- BS-EN-ISO-2178-TC - Tracked Changes. Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method
- BS-EN-ISO-2746 - Vitreous and porcelain enamels. High voltage test
- BS-EN-ISO-2747 - Vitreous and porcelain enamels. Enamelled cooking utensils. Determination of resistance to thermal shock
- BS-EN-ISO-28706-2 - Vitreous and porcelain enamels. Determination of resistance to chemical corrosion
- BS-EN-ISO-28706-2-TC - Tracked Changes. Vitreous and porcelain enamels. Determination of resistance to chemical corrosion
- BS-EN-ISO-28706-3-TC - Tracked Changes. Vitreous and porcelain enamels. Determination of resistance to chemical corrosion
- BS-EN-ISO-28706-4 - Vitreous and porcelain enamels. Determination of resistance to chemical corrosion
- BS-EN-ISO-28706-4-TC - Tracked Changes. Vitreous and porcelain enamels. Determination of resistance to chemical corrosion
- BS-EN-ISO-28706-5 - Vitreous and porcelain enamels. Determination of resistance to chemical corrosion
- BS-EN-ISO-28721-2 - Vitreous and porcelain enamels. Glass-lined apparatus for process plants
- BS-EN-ISO-28721-2-TC - Tracked Changes. Vitreous and porcelain enamels. Glass-lined apparatus for process plants
- BS-EN-ISO-28721-4 - Vitreous and porcelain enamels. Glass-lined apparatus for process plants
- BS-EN-ISO-28721-4-TC - Tracked Changes. Vitreous and porcelain enamels. Glass-lined apparatus for process plants
- BS-EN-ISO-28721-5 - Vitreous and porcelain enamels. Glass-lined apparatus for process plants
- BS-EN-ISO-28764 - Vitreous and porcelain enamels. Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
- BS-EN-ISO-28765 - Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
- BS EN ISO 28765-TC - Tracked Changes. Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
- BS-EN-ISO-4528 - Vitreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelain enamelled areas of articles
- BS-EN-ISO-4528-TC - Tracked Changes. Vitreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelain enamelled areas of articles
- BS-EN-ISO-4530 - Vitreous and porcelain enamelled manufactured articles. Determination of resistance to heat
- BS-EN-ISO-4530-TC - Tracked Changes. Vitreous and porcelain enamelled manufactured articles. Determination of resistance to heat
- BS-EN-ISO-4531 - Vitreous and porcelain enamels. Release from enamelled articles in contact with food. Methods of test and limits
- BS-EN-ISO-4531-TC - Tracked Changes. Vitreous and porcelain enamels. Release from enamelled articles in contact with food. Methods of test and limits
- BS-EN-ISO-4532 - Vitreous and porcelain enamels. Determination of the resistance of enamelled articles to impact. Pistol test
- BS-EN-ISO-4534 - Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test
- BS-EN-ISO-4535 - Vitreous & Porcelain Enamels, Apparatus for Determination Ofresistance To Hot Detergen
- BS-EN-ISO-6370-1 - Vitreous and porcelain enamels. Determination of the resistance to abrasion
- BS-EN-ISO-6370-2 - Vitreous and porcelain enamels. Determination of the resistance to abrasion
- BS-EN-ISO-6769-TC - Tracked Changes. Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale
- BS-EN-ISO-8289 - Vitreous and porcelain enamels. Low voltage test for detecting and locating defects
- BS-EN-ISO-8289-2 - Vitreous and porcelain enamels. Low-voltage test for detecting and locating defects
- BS-EN-ISO-8291 - Vitreous and porcelain enamels. Method of test of self-cleaning properties
- BS-ISO-13804 - Vitreous and porcelain enamels for aluminium. Production of specimens for testing
- BS-ISO-13805 - Vitreous & Porcelain Enamels for Aluminium, Determination of the Adhesion of Enamels O
- BS-ISO-13806 - Vitreous and porcelain enamels. Corrosion tests in closed systems
- BS-ISO-13807 - Vitreous & Porcelain Enamels. Determination of Crack Formation Temperature in the Ther
- BS-ISO-4528 - Vitreous & Porcelain Enamel Finishes - Selection of Test Methods for Vitreous & Porcel
- BS-ISO-6370-2 - Vitreous and porcelain enamels. Determination of the resistance to abrasion
ISO:
- ISO-11177 - Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing
- ISO-13804 - Vitreous and porcelain enamels for aluminium -- Production of specimens for testing
- ISO-13805 - Vitreous and porcelain enamels for aluminium -- Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
- ISO-13806 - Vitreous and porcelain enamels -- Corrosion tests in closed systems
- ISO-13807 - Vitreous and porcelain enamels -- Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
- ISO-15695 - Vitreous and porcelain enamels -- Determination of scratch resistance of enamel finishes
- ISO-19496-1 - Vitreous and porcelain enamels - Terminology - Part 1: Terms and definitions
- ISO-19496-2 - Vitreous and porcelain enamels - Terminology - Part 2: Visual representations and descriptions
- ISO-20274 - Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient
- ISO-2178 - Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
- ISO-2723 - Vitreous and porcelain enamels for sheet steel - Production of specimens for testing
- ISO-2724 - Vitreous and porcelain enamels for cast iron - Production of specimens for testing
- ISO-2733 - Vitreous and porcelain enamels - Apparatus for testing with acid and neutral liquids and their vapours
- ISO-2734 - Vitreous and porcelain enamels - Apparatus for testing with alkaline liquids
- ISO-2742 - Vitreous and porcelain enamels - Determination of resistance to boiling citric acid
- ISO-2743 - Vitreous and porcelain enamels - Determination of resistance to condensing hydrochloric acid vapour
- ISO-2744 - Vitreous and porcelain enamels - Determination of resistance to boiling water and water vapour
- ISO-2745 - Vitreous and porcelain enamels - Determination of resistance to hot sodium hydroxide
- ISO-2746 - Vitreous and porcelain enamels - High voltage test
- ISO-2747 - Vitreous and porcelain enamels - Enamelled cooking utensils - Determination of resistance to thermal shock
- ISO-28706-1 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature
- ISO-28706-2 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
- ISO-28706-3 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle
- ISO-28706-4 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
- ISO-28706-5 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems
- ISO-28721-1 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories
- ISO-28721-2 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock
- ISO-28721-3 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3: Thermal shock resistance
- ISO-28721-4 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
- ISO-28721-5 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 5: Presentation and characterization of defects
- ISO-28722 - Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture
- ISO-28723 - Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers
- ISO-28762 - Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification
- ISO-28763 - Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications
- ISO-28764 - Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
- ISO-28765 - Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
- ISO-4528 - Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles
- ISO-4530 - Vitreous and porcelain enamelled manufactured articles - Determination of resistance to heat
- ISO-4531 - Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits
- ISO-4531-1 - Vitreous and porcelain enamels - Release of lead and cadmium from enamelled ware in contact with food - Part 1: Method of test
- ISO-4531-2 - Vitreous and porcelain enamels - Release of lead and cadmium from enamelled ware in contact with food - Part 2: Permissible limits
- ISO-4532 - Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test
- ISO-4533 - Vitreous and porcelain enamels - Determination of resistance to hot detergent solutions used for washing textiles
- ISO-4534 - Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
- ISO-4535 - Vitreous and porcelain enamels - Apparatus for determination of resistance to hot detergent solutions used for washing textiles
- ISO-6370-1 - Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus
- ISO-6370-2 - Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion
- ISO-6769 - Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
- ISO-8289 - Vitreous and porcelain enamels -- Low voltage test for detecting and locating defects
- ISO-8289-1 - Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 1: Swab test for non-profiled surfaces
- ISO-8289-2 - Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2: Slurry test for profiled surfaces
- ISO-8290 - Vitreous and porcelain enamels - Determination of resistance to sulfuric acid at room temperature
- ISO-8291 - Vitreous and porcelain enamels - Method of test of self-cleaning properties
Other SDOs:
- DIN-EN-14430 - Vitreous and porcelain enamels - High voltage test; German version EN 14430:2004
- DIN-EN-14431 - Vitreous & Porcelain Enamels, Characteristics of the Enamel Coatings Applied To Steel
- DIN-EN-14483-1 - Part 1: Determination of Resistance To Chemical Corrosion by Acids at Room Temperature
- DIN-EN-14483-2 - Part 2: Determination of Resistance To Chemical Corrosion by Boiling Acids, Neutral Li
- DIN-EN-14483-3 - Part 3: Determination of Resistance To Chemical Corrosion by Alkaline Liquids Using A
- DIN-EN-14483-4 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel; German version EN 14483-4:2004
- DIN-EN-14483-5 - Part 5: Determination of Resistance To Chemical Corrosion in Closed Systems, Vitreous
- DIN-EN-14863 - Vitreous & Porcelain Enamels - Determination of the Edge Covering on Enamelled Steel P
- DIN-EN-14864 - Vitreous & Porcelain Enamels - Enamel Coatings Applied To Steel for Writing Surfaces -
- DIN-EN-14866 - Vitreous & Porcelain Enamels - Regenerative, Enamelled & Packed Panels for Air-Gas & G
- DIN-EN-15159-1 - Part 1: Quality Requirements for Apparatus, Components, Appliances & Accessories, Vitr
- DIN-EN-15159-2 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock; German version EN 15159-2:2006
- DIN-EN-15159-3 - Part 3: Thermal Shock Resistance, Vitreous & Porcelain Enamels - Glass-Lined Apparatus
- DIN-EN-15282 - Vitreous & Porcelain Enamels - Design of Bolted Steel Tanks for the Storage or Treatm
- EN-14430 - Vitreous & Porcelain Enamels, High Voltage Test
- EN-14431 - Vitreous & Porcelain Enamels, Characteristics of the Enamel Coatings Applied To Steel
- EN-14483-1 - Part 1: Determination of Resistance To Chemical Corrosion by Acids at Room Temperature
- EN-14483-2 - Part 2: Determination of Resistance To Chemical Corrosion by Boiling Acids, Neutral Li
- EN-14483-3 - Part 3: Determination of Resistance To Chemical Corrosion by Alkaline Liquids Using A
- EN-14483-4 - Part 4: Determination of Resistance To Chemical Corrosion by Alkaline Liquids Using A
- EN-14483-5 - Part 5: Determination of Resistance To Chemical Corrosion in Closed Systems, Vitreous
- EN-14863 - Vitreous & Porcelain Enamels - Determination of the Edge Covering on Enamelled Steel P
- EN-14864 - Vitreous & Porcelain Enamels - Enamel Coatings Applied To Steel for Writing Surfaces -
- EN-14866 - Vitreous & Porcelain Enamels - Regenerative, Enamelled & Packed Panels for Air-Gas & G
- EN-15159-1 - Part 1: Quality Requirements for Apparatus, Components, Appliances & Accessories, Vitr
- EN-15159-2 - Part 2: Designation & Specification of Resistance To Chemical Attack & Thermal Shock,
- EN-15159-3 - Part 3: Thermal Shock Resistance, Vitreous & Porcelain Enamels - Glass-Lined Apparatus
- EN-15206 - Vitreous & Porcelain Enamels - Production of Specimens for Testing Enamel on Sheet Ste
- EN-15282 - Vitreous & Porcelain Enamels - Design of Bolted Steel Tanks for the Storage or Treatm
- EN-15711 - Vitreous & Porcelain Enamals - Glass Lined Flanged Steel Pipes & Flanged Steel Fitting
- EN-15771 - Vitreous & Porcelain Enamels - Determination of Surface Scratch Hardness According To
- EN-15826 - Vitreous & Porcelain Enamels - Terminology
- EN-ISO-11177 - Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing
- EN-ISO-13805 - Vitreous & Porcelain Enamels for Aluminium, Determination of the Adhesion of Enamels O
- EN-ISO-13807 - Vitreous & Porcelain Enamels, Determination of Crack Formation Temperature in the Ther
- EN-ISO-19496-1 - Vitreous and porcelain enamels - Terminology - Part 1: Terms and definitions
- EN-ISO-19496-2 - Vitreous and porcelain enamels - Terminology - Part 2: Visual representations and descriptions
- EN-ISO-20274 - Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient
- EN-ISO-2178 - Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
- EN-ISO-2746 - Vitreous and porcelain enamels - High voltage test
- EN-ISO-28706-2 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
- EN-ISO-28706-3 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (ISO 28706-3:2008)
- EN-ISO-28706-4 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
- EN-ISO-28706-5 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems
- EN-ISO-28721-1 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories
- EN-ISO-28721-2 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock
- EN-ISO-28721-3 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3: Thermal shock resistance
- EN-ISO-28721-4 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO 28721-4:2010)
- EN-ISO-28721-5 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 5: Presentation and characterisation of defects
- EN-ISO-28722 - Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture
- EN-ISO-28723 - Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers
- EN-ISO-28763 - Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications (ISO 28763:2008)
- EN-ISO-28764 - Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
- EN-ISO-28765 - Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
- EN-ISO-4528 - Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
- EN-ISO-8289-2 - Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2: Slurry test for profiled surfaces (ISO 8289-2:2019)
- SS-EN-14430 - Vitreous and porcelain enamels - High voltage test
- SS-EN-14431 - Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture
- SS-EN-14483-1 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature
- SS-EN-14483-2 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours
- SS-EN-14483-3 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
- SS-EN-14483-4 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
- SS-EN-14483-5 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems
- SS-EN-14863 - Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers
- SS-EN-14864 - Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification
- SS-EN-14866 - Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications
- SS-EN-15159-1 - Vitreous and porcelain enamels - Glass lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories
- SS-EN-15159-2 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock
- SS-EN-15159-3 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3: Thermal shock resistance
- SS-EN-15206 - Vitreous and porcelain enamels - Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron
- SS-EN-15282 - Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
- SS-EN-15711 - Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements
- SS-EN-15771 - Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
- SS-EN-15826 - Vitreous and porcelain enamels - Terminology
- SS-EN-ISO-11177 - Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2019)
- SS-EN-ISO-13805 - Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) (ISO 13805:1999)
- SS-EN-ISO-13807 - Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry (ISO 13807:2022)
- SS-EN-ISO-15695 - Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes (ISO 15695:2000, including Technical Corrigendum 1:2000)
- SS-EN-ISO-19496-1 - Vitreous and porcelain enamels - Terminology - Part 1: Terms and definitions (ISO 19496-1:2017)
- SS-EN-ISO-19496-2 - Vitreous and porcelain enamels - Terminology - Part 2: Visual representations and descriptions (ISO 19496-2:2017)
- SS-EN-ISO-20274 - Vitreous and porcelain enamels - Preparation of samples and determination of thermal expansion coefficient (ISO 20274:2017)
- SS-EN-ISO-2178 - Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016)
- SS-EN-ISO-2746 - Vitreous and porcelain enamels - High voltage test (ISO 2746:2015)
- SS-EN-ISO-2747 - Vitreous and porcelain enamels - Enamelled cooking utensils - Determination of resistance to thermal shock (ISO 2747:1998)
- SS-EN-ISO-28706-1 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008)
- SS-EN-ISO-28706-2 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017)
- SS-EN-ISO-28706-3 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle (ISO 28706-3:2017)
- SS-EN-ISO-28706-4 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016)
- SS-EN-ISO-28706-5 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems (ISO 28706-5:2010)
- SS-EN-ISO-28721-1 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2019)
- SS-EN-ISO-28721-2 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock (ISO 28721-2:2015)
- SS-EN-ISO-28721-3 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3: Thermal shock resistance (ISO 28721-3:2008)
- SS-EN-ISO-28721-4 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO 28721-4:2015)
- SS-EN-ISO-28721-5 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 5: Presentation and characterisation of defects (ISO 28721-5:2016)
- SS-EN-ISO-28722 - Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture (ISO 28722:2008)
- SS-EN-ISO-28723 - Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers (ISO 28723:2008)
- SS-EN-ISO-28762 - Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010)
- SS-EN-ISO-28763 - Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications (ISO 28763:2019)
- SS-EN-ISO-28764 - Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron (ISO 28764:2015)
- SS-EN-ISO-28765 - Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2022)
- SS-EN-ISO-4528 - Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2022)
- SS-EN-ISO-4530 - Vitreous and porcelain enamelled manufactured articles - Determination of resistance to heat (ISO 4530:2022)
- SS-EN-ISO-4531 - Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits (ISO 4531:2022)
- SS-EN-ISO-4532 - Vitreous and porcelain enamels - Determination of the resistance of enamelled articles to impact - Pistol test (ISO 4532:1991)
- SS-EN-ISO-4534 - Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)
- SS-EN-ISO-4535 - Vitreous and porcelain enamels - Apparatus for determination of resistance to hot detergent solution used for washing textiles (ISO 4535:1983)
- SS-EN-ISO-6370-1 - Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus (ISO 6370-1:1991)
- SS-EN-ISO-6370-2 - Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2020)
- SS-EN-ISO-6769 - Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
- SS-EN-ISO-8044 - Corrosion of metals and alloys - Vocabulary (ISO 8044:2020)
- SS-EN-ISO-8289 - Vitreous and porcelain enamels - Low voltage test for detecting and locating defects (ISO 8289:2000)
- SS-EN-ISO-8289-1 - Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 1: Swab test for non-profiled surfaces (ISO 8289-1:2020)
- SS-EN-ISO-8289-2 - Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects - Part 2: Slurry test for profiled surfaces (ISO 8289-2:2019)
- SS-EN-ISO-8290 - Vitreous and porcelain enemals - Determination of resistance to sulfuric acid at room temperature (ISO 8290:1998)
- SS-EN-ISO-8291 - Vitreous and porcelain enamels - Method of test of self-cleaning properties (ISO 8291:1986)
- SS-ISO-2733 - Vitreous and porcelain enamels - Apparatus for testing with acid and neutral liquids and their vapours
- SS-ISO-2734 - Vitreous and porcelain enamels - Apparatus for testing with alkaline liquids
- SS-ISO-2742 - Vitreous and porcelain enamels - Determination ofresistance to boiling citric acid
- SS-ISO-2743 - Vitreous and porcelain enamels - Determination ofresistance to condensing hydrochloric acid vapour
- SS-ISO-2744 - Vitreous and porcelain enamels - Determination ofresistance to boiling water and water vapour
- SS-ISO-4530 - Vitreous and porcelain enamelled manufactured articles - Determination of resistance to heat
- SS-ISO-4533 - Vitreous and porcelain enamels - Determination ofresistance to hot detergent solutions used for washing textiles
- SS-ISO-4534 - Vitreous and porcelain enamels - Determination offluidity behaviour - Fusion flow test
- SS-ISO-4535 - Vitreous and porcelain enamels - Apparatus for determination of resistance to hot detergent solutions used for washing textiles
- SS-ISO-8289 - Vitreous and porcelain enamels - Low voltage testfor detecting and locating defects
- SS-ISO-8290 - Vitreous and porcelain enamels - Determination ofresistance to sulfuric acid at room temperature
- SS-ISO-8291 - Vitreous and porcelain enamels - Method of test of self-cleaning properties
- UNE-EN-ISO-28721-2 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock
- UNE-EN-ISO-28721-5 - Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 5: Presentation and characterisation of defects