Document Center List of Standards on Hand-Held Tools In General
ICS Code 25.140.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-4078-1 - Powder actuated fixing systems
- BS-4078-2 - Powder actuated fixing systems
- BS-EN-1454 - Portable, hand-held, internal combustion cutting-off machines. Safety
- BS-EN-28662-3 - Rock Drills and Rotary Hammers
- BS-EN-60745-2-23 - Hand-held motor-operated electric tools. Safety
- BS-EN-792-1 - Hand-held non-electric power tools. Safety requirements
- BS-EN-792-10 - Hand-Held Non-Electric Power Tools. Safety Requirements. Compression Power Tools
- BS-EN-792-11 - Hand-Held Non-Electric Power Tools. Safety Requirements. Nibblers and Shears
- BS-EN-792-12 - Hand-held non-electric power tools. Safety requirements. Small circular, small oscillating and reciprocating saws
- BS-EN-792-13 - Hand-held non-electric power tools. Safety requirements. Fastener driving tools
- BS-EN-792-2 - Hand-held non-electric power tools. Safety requirements. Cutting-off and crimping power tools
- BS-EN-792-3 - Hand-held non-electric power tools. Safety requirements. Drills and tappers
- BS-EN-792-5 - Hand-held non-electric power tools. Safety requirements
- BS-EN-792-6 - Hand-held non-electric power tools. Safety requirements. Assembly power tools for threaded fasteners
- BS-EN-792-7 - Hand-held non-electric power tools. Safety requirements. Grinders
- BS-EN-792-9 - Part 9: Die Grinders, Hand-Held Non-Electric Power Tools, Safety Requirements
- BS-EN-ISO-15744 - Hand-held non-electric power tools. Noise measurement code. Engineering method (grade 2)
- BS-EN-ISO-20643 - Mechanical vibration. Hand-held and hand-guided machinery. Principles for evaluation of vibration emission
- BS-EN-ISO-28927-1 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-2 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-3 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-5 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-6 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-7 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-8 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-28927-9 - Hand-held portable power tools. Test methods for evaluation of vibration emission
- BS-EN-ISO-8662-12 - Hand-held portable power tools. Measurement of vibrations at the handle
- BS-EN-ISO-8662-13 - Hand-held portable power tools. Measurement of vibrations at the handle. Die grinders
- BS-EN-ISO-8662-4 - Grinding Machines
- BS-EN-ISO-8662-6 - Hand-held portable power tools. Measurement of vibrations at the handle. Impact drills
- BS-EN-ISO-8662-7 - Hand-held portable power tools. Measurement of vibrations at the handle
- BS-EN-ISO-8662-8 - Hand-Held Portable Power Tools, Measurement of Vibrations at the Handle, Polishers & R
- BS-ISO-1703 - Assembly tools for screws and nuts. Nomenclature
- BS-ISO-17066 - Hydraulic tools. Vocabulary
- BS-ISO-1711-1 - Assembly tools for screws and nuts. Technical specifications
- BS-ISO-1711-2 - Assembly tools for screws and nuts. Technical specifications
- BS-ISO-2351-1 - Assembly tools for screws and nuts. Machine-operated screwdriver bits
- BS-ISO-2351-3 - Assembly tools for screws and nuts. Machine-operated screwdriver bits
- BS-ISO-2725-2 - Assembly tools for screws and nuts. Square drive sockets
- BS-ISO-2725-3 - Assembly tools for screws and nuts. Square drive sockets
- PD-ISO-20571 - Dynaload. Design and construction. Use and maintenance
- PD-ISO-27609 - Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round-robin test
ISO:
- ISO-10914 - Assembly tools for screws and nuts - Sockets and wrenches for spline drive
- ISO-11168 - Socket wrenches for spark- and glow-plugs
- ISO-1174 - Assembly tools for bolts and screws -- Driving squares for power socket wrenches and hand socket wrenches
- ISO-1174-2 - Assembly tools for screws and nuts - Driving squares - Part 2: Driving squares for power socket tools
- ISO-15744 - Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2)
- ISO-1703 - Assembly tools for screws and nuts - Nomenclature
- ISO-17066 - Hydraulic tools - Vocabulary
- ISO-1711-1 - Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets
- ISO-1711-2 - Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets (impact)
- ISO-20571 - Dynaload - Design and construction - Use and maintenance
- ISO-20643 - Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission
- ISO-20643-AM1 - Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions
- ISO-2351-1 - Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws
- ISO-2351-2 - Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws
- ISO-2351-3 - Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws
- ISO-2380-1 - Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers
- ISO-2380-2 - Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
- ISO-2725-2 - Assembly tools for screws and nuts - Square drive sockets - Part 2: Machine-operated sockets (impact)
- ISO-2725-3 - Assembly tools for screws and nuts - Square drive sockets - Part 3: Machine-operated sockets (non-impact)
- ISO-4228 - Spanners and wrenches - Spline drive ends for power socket wrenches
Other SDOs:
- DIN-EN-ISO-15744 - Hand-Held Non-Electric Power Tools, Noise Measurement Code - Engineering Method (Grade
- DIN-ISO-2351-1 - Part 1: Screwdriver Bits for Slotted Head Screws, Assembly Tools for Screws & Nuts - M
- DIN-ISO-2351-2 - Part 2: Screwdriver Bits for Cross-Recessed Head Screws, Assembly Tools for Screws & N
- DIN-ISO-2351-3 - Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws
- DIN-ISO-2380-1 - Part 1: Tips for Hand- & Machine-Operated Screwdrivers, Assembly Tools for Screws & Nu
- DIN-ISO-8764-1 - Part 1: Driver Tips, Assembly Tools for Screws & Nuts - Screwdrivers for Cross-Recesse
- EN-792-10 - Part 10: Compression Power Tools, Hand-Held Non-Electric Power Tools - Safety Requirem
- EN-792-13 - Part 13: Fastener Driving Tools, Hand-Held Non-Electric Power Tools - Safety Requireme
- EN-792-2 - Part 2: Cutting-Off & Crimping Power Tools, Hand-Held Non-Electric Power Tools - Safet
- EN-792-6 - Part 6: Assembly Power Tools for Threaded Fasteners, Hand-Held Non-Electric Power Tool
- EN-ISO-15744 - Hand-Held Non-Electric Power Tools, Noise Measurement Code, Engineering Method (Grade
- EN-ISO-8662-12 - Hand-Held Portable Power Tools, Measurement of Vibrations at the Handle, Saws & Flies
- EN-ISO-8662-13 - Hand-Held Portable Power Tools, Measurement of Vibrations at the Handle, Die Grinders
- EN-ISO-8662-7 - Hand-Held Portable Power Tools, Measurement of Vibrations at the Handle, Wrenches, Scr
- EN-ISO-8662-8 - Hand-Held Portable Power Tools, Measurement of Vibrations at the Handle, Polishers & R
- SIS-CEN/TR-15350 - Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery
- SIS-ISO/TR-20571 - Dynaload Design - construction - use and maintenance
- SS-EN-1454 - Portable, hand-held, internal combustion cutting-off machines - Safety
- SS-EN-792-13 - Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools
- SS-EN-ISO-1454 - Portable, hand-held, internal combustion cutting-off machines - Safety
- SS-EN-ISO-15744 - Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)
- SS-EN-ISO-19226 - Nuclear energy - Determination of neutron fluence and displacement per atom (dpa) in reactor vessel and internals (ISO 19226:2017)
- SS-EN-ISO-19361 - Measurement of radioactivity - Determination of beta emitters activities - Test method using liquid scintillation counting (ISO 19361:2017)
- SS-EN-ISO-19432 - Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012)
- SS-EN-ISO-19432-1 - Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020)
- SS-EN-ISO-20643 - Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005)
- SS-EN-ISO-20643-AM1 - Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012)
- SS-ISO-11168 - Socket wrenches for spartik- and glow-plugs
- SS-ISO-1703 - Assembly tools for screws and nuts - Nomenclature (ISO 1703:2018, IDT)
- SS-ISO-17066 - Hydraulic tools - Vocabulary (ISO 17066:2007, IDT)
- SS-ISO-1711-1 - Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2019, IDT)
- SS-ISO-1711-2 - Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets (impact) (ISO 1711-2:2019, IDT)
- SS-ISO-2351-1 - Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007, IDT)
- SS-ISO-2351-2 - Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002, IDT)
- SS-ISO-2351-3 - Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2014, IDT)
- SS-ISO-2380-1 - Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers (ISO 2380-1:2004, IDT)
- SS-ISO-2380-2 - Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004, IDT)
- SS-ISO-2725-1 - Assembly tools for screws and nuts - Square drive sockets - Part 1: Hand-operated sockets (ISO 2725-1:2017, IDT)
- SS-ISO-2725-2 - Assembly tools for screws and nuts - Square drive sockets - Part 2: Machine-operated sockets ("impact") (ISO 2725-2:2017, IDT)
- SS-ISO-2725-3 - Assembly tools for screws and nuts - Square drive sockets - Part 3: Machine-operated sockets ("non-impact") (ISO 2725-3:2016, IDT)
- SS-ISO-4228 - Spanners and wrenches - Spline drive ends for power socket wrenches
- SS-ISO-8662-11 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 11: Fastener driving tools (nailers)
- SS-ISO-8662-11-AM1 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 11: Fastener driving tools