Document Center List of Standards on Fasteners In General
ICS Code 21.060.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A193 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
- ASTM-A320 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
- ASTM-A437 - Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
- ASTM-A453 - Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
- ASTM-A540 - Standard Specification for Alloy-Steel Bolting for Special Applications
- ASTM-A962 - Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
- ASTM-B839 - Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method (Withdrawn 2021)
- ASTM-D1761 - Standard Test Methods for Mechanical Fasteners in Wood and Wood-Based Materials
- ASTM-D5169 - Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
- ASTM-D5648 - Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
- ASTM-D5649 - Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
- ASTM-D5652 - Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products
- ASTM-E1685 - Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
- ASTM-F1135 - Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners (Withdrawn 2009)
- ASTM-F1136 - Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
- ASTM-F1137 - Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
- ASTM-F1667 - Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- ASTM-F1789 - Standard Terminology for F16 Mechanical Fasteners
- ASTM-F1852 - Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)
- ASTM-F1940 - Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
- ASTM-F1941 - Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
- ASTM-F1941M - Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric] (Withdrawn 2015)
- ASTM-F2280 - Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016)
- ASTM-F2282 - Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
- ASTM-F2328 - Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
- ASTM-F2328M - Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
- ASTM-F2437 - Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
- ASTM-F2832 - Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners
- ASTM-F3043 - Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
- ASTM-F3111 - Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
- ASTM-F3217 - Standard Guide for Security Fasteners
- ASTM-F3359 - Standard Test Method for Determining Bending Yield Moment of Staples
- ASTM-F606 - Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
- ASTM-F606M - Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) (Withdrawn 2015)
- ASTM-F871M - Specification for Electrodeposited Coatings on Threaded Components [Metric] (Withdrawn 2001)
- ASTM-F959 - Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series
- ASTM-G198 - Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
BSI:
- BIP-2191 - BSI Handbook 44. Threaded fasteners
- BS-1494-1 - Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings
- BS-1494-2 - Specification for fixing accessories for building purposes. Sundry fixings
- BS-3382-7 - Specification for Electroplated Coatings on Threaded Components, Thicker Platings For
- BS-3382-S-1-&-2 - Specification for Electroplated Coatings on Threaded Components, Cadmium on Steel Comp
- BS-3382-S-5-&-6 - Specification for Electroplated Coatings on Threaded Components, Tin on Copper and Coppe
- BS-4185-9 - Specification. Machine tool components.
- BS-4395-1 - Specification for high strength friction grip bolts and associated nuts and washers for structural engineering. General grade
- BS-4395-2 - Specification for high strength friction grip bolts and associated nuts and washers for structural engineering. Higher grade bolts and nuts and general grade washers
- BS-6587 - Method of acceptance inspection for fasteners
- BS-7371-1 - Coatings on metal fasteners
- BS-7371-10 - Coatings on metal fasteners
- BS-7371-11 - Coatings on metal fasteners. Specification for zinc flake non-electrolytically applied cured coatings
- BS-7371-3 - Coatings on metal fasteners
- BS-746 - Specification for gas meter unions and adaptors
- BS-8498 - British Standards for screw threads and screw gauges. Introduction and guidance
- BS-EN-12512 - Timber structures. Test methods. Cyclic testing of joints made with mechanical fasteners
- BS-EN-14399-1 - High-strength structural bolting assemblies for preloading
- BS-EN-14399-10 - High-strength structural bolting assemblies for preloading
- BS-EN-14399-10-TC - Tracked Changes. High-strength structural bolting assemblies for preloading
- BS-EN-14399-1-TC - Tracked Changes. High-strength structural bolting assemblies for preloading
- BS-EN-14399-2 - High-strength structural bolting assemblies for preloading
- BS-EN-14399-2-TC - Tracked Changes. High-strength structural bolting assemblies for preloading
- BS-EN-14399-3 - High-strength structural bolting assemblies for preloading
- BS-EN-14399-3-TC - Tracked Changes. High-strength structural bolting assemblies for preloading
- BS-EN-14399-4 - High-strength structural bolting assemblies for preloading
- BS-EN-14399-4-TC - Tracked Changes. High-strength structural bolting assemblies for preloading
- BS-EN-14399-7 - High-strength structural bolting assemblies for preloading
- BS-EN-14399-7-TC - Tracked Changes. High-strength structural bolting assemblies for preloading
- BS-EN-14399-8 - High-strength structural bolting assemblies for preloading
- BS-EN-14399-9 - High-strength structural bolting assemblies for preloading
- BS-EN-14399-9-TC - Tracked Changes. High-strength structural bolting assemblies for preloading
- BS-EN-15048-1 - Non-preloaded structural bolting assemblies
- BS-EN-15048-1-TC - Tracked Changes. Non-preloaded structural bolting assemblies
- BS-EN-15048-2 - Non-preloaded structural bolting assemblies
- BS-EN-15048-2-TC - Tracked Changes. Non-preloaded structural bolting assemblies
- BS-EN-20273 - Fasteners. Clearance holes for bolts and screws
- BS-EN-ISO-10683 - Fasteners. Non-electrolytically applied zinc flake coating systems
- BS-EN-ISO-10683-TC - Tracked Changes. Fasteners. Non-electrolytically applied zinc flake coating systems
- BS-EN-ISO-10684 - Fasteners. Hot dip galvanized coatings
- BS-EN-ISO-15330 - Fasteners. Preloading test for the detection of hydrogen embrittlement. Parallel bearing surface method
- BS-EN-ISO-16047 - Fasteners. Torque/clamp force testing
- BS-EN-ISO-16048 - Passivation of corrosion-resistant stainless-steel fasteners
- BS-EN-ISO-16228 - Fasteners. Types of inspection documents
- BS-EN-ISO-16426 - Fasteners. Quality assurance system
- BS-EN-ISO-1891-2 - Fasteners. Terminology
- BS-EN-ISO-1891-4 - Fasteners. Vocabulary
- BS-EN-ISO-3269 - Fasteners. Acceptance inspection
- BS-EN-ISO-3506-6 - Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners
- BS-EN-ISO-4042 - Fasteners. Electroplated coating systems
- BS-EN-ISO-4042-TC - Tracked Changes. Fasteners. Electroplated coating systems
- BS-EN-ISO-4753 - Fasteners. Ends of parts with external ISO metric thread
- BS-EN-ISO-5845-1 - Technical drawings. Simplified representation of the assemby of parts with fasteners
- BS-ISO-1891 - Fasteners. Terminology
- BS-ISO-3506-6 - Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners
- DD-CEN-1992-4-1 - Design of fastenings for use in concrete
- DD-CEN-1992-4-3 - Design of fastenings for use in concrete
- PD-6507 - Guidance on metric screw threads and fasteners for use by model engineers
- PD-CEN-17079 - Design of fastenings for use in concrete. Redundant non-structural systems
- PD-CEN-17080 - Design of fastenings for use in concrete. Anchor channels. Supplementary rules
- PD-CEN-17081 - Design of fastenings for use in concrete. Plastic design of fastenings with headed and post-installed fasteners
ISO:
- ISO-10683 - Fasteners - Non-electrolytically applied zinc flake coating systems
- ISO-10684 - Fasteners - Hot dip galvanized coatings
- ISO-15330 - Fasteners -- Preloading test for the detection of hydrogen embrittlement -- Parallel bearing surface method
- ISO-16047 - Fasteners - Torque/clamp force testing
- ISO-16047-AM1 - Fasteners - Torque/clamp force testing - Amendment 1
- ISO-16048 - Passivation of corrosion-resistant stainless-steel fasteners
- ISO-16228 - Fasteners - Types of inspection documents
- ISO-16426 - Fasteners - Quality assurance system
- ISO-1891 - Fasteners - Terminology
- ISO-1891-2 - Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings
- ISO-1891-2-AM1 - - Amendment 1
- ISO-1891-4 - Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality
- ISO-20491 - Fasteners - Fundamentals of hydrogen embrittlement in steel fasteners
- ISO-272 - Fasteners - Hexagon products - Widths across flats
- ISO-273 - Fasteners - Clearance holes for bolts and screws
- ISO-3269 - Fasteners - Acceptance inspection
- ISO-3506-6 - Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners
- ISO-3508 - Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
- ISO-3800 - Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results
- ISO-4042 - Fasteners - Electroplated coating systems
- ISO-4753 - Fasteners - Ends of parts with external ISO metric thread
- ISO-4755 - Fasteners - Thread undercuts for external metric ISO threads
- ISO-5845-1 - Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles
- ISO-8991 - Designation system for fasteners
Other SDOs:
- ASME-B18.12 - Glossary of Terms for Mechanical Fasteners
- ASME-B18.2.6 - Fasteners for Use in Structural Applications
- ASME-B18.2.6M - Metric Fasteners for Use in Structural Applications
- DIN-918 - Fasteners - Terminology, spelling of terms, abbreviations
- DIN-918 SUP 3 - Supplement 3: European Standards - Survey, Fasteners
- DIN-EN-12512 - Timber Structures - Test Methods - Cycllic Testing of Joints Made With Mechanical Fast
- DIN-EN-ISO-10684 - Fasteners - Hot dip galvanized coatings
- DIN-EN-ISO-16047 - Fasteners - Torque/clamp force testing (ISO 16047:2005 + Amd 1:2012)
- EN-12512 - Timber Structures - Test Methods, Cyclic Testing of Joints Made With Mechanical Fasten
- EN-14399-1 - High-strength structural bolting assemblies for preloading - Part 1: General requirements
- EN-14399-10 - Part 10: System Hrc - Bolt & Nut Assemblies With Calibrated Preload, High-Strength St
- EN-14399-2 - High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
- EN-14399-3 - High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
- EN-14399-4 - High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
- EN-14399-7 - High-Strength Structural Bolting Assemblies for Preloading, System Hr, Countersunk He
- EN-14399-8 - Part 8: System Hv - Hexagon Fit Bolt & Nut Assemblies, High-Strength Structural Boltin
- EN-14399-9 - Part 9: System Hr or Hv - Direct Tension Indicators for Bolt & Nut Assemblies, High-St
- EN-15048-1 - Non-preloaded structural bolting assemblies - Part 1: General requirements
- EN-15048-2 - Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
- EN-20273 - Fasteners, Clearance Holes for Bolts & Screws
- EN-ISO-10683 - Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)
- EN-ISO-10684 - Fasteners - Hot dip galvanized coatings
- EN-ISO-15330 - Fasteners, Preloading Test for the Detection of Hydrogen Embrittlement - Parallel Bear
- EN-ISO-16047 - Fasteners, Torque/Clamp Force Testing
- EN-ISO-1891-2 - Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings
- EN-ISO-1891-4 - Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
- EN-ISO-3269 - Fasteners, Acceptance Inspection
- EN-ISO-4753 - Fasteners - Ends of parts with external ISO metric thread
- JIS-B-1010 - Designation system for fasteners
- JIS-B-1018 - Fasteners -- Thread undercuts for external metric ISO threads
- JIS-B-1044 - Fasteners -- Electroplated coatings
- JIS-B-1045 - Fasteners -- Preloading test for the detection of hydrogen embrittlement -- Parallel bearing surface method
- JIS-B-1046 - Fasteners -- Non-electrolytically applied zinc flake coatings
- JIS-B-1091 - Fasteners -- Acceptance inspection
- SIS-CEN-1992-4-1 - Design of fastenings for use in concrete - Part 4-1: General
- SIS-CEN-1992-4-3 - Design of fastenings for use in concrete - Part 4-3: Anchor channels
- SIS-CEN/TR-17079 - Design of fastenings for use in concrete - Redundant non-structural systems
- SIS-CEN/TR-17080 - Design of fastenings for use in concrete - Anchor channels - Supplementary rules
- SIS-CEN/TR-17081 - Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners
- SIS-CEN/TS-1992-4-1 - Design of fastenings for use in concrete - Part 4-1: General
- SIS-CEN/TS-1992-4-3 - Design of fastenings for use in concrete - Part 4-3: Anchor channels
- SIS-ISO/TR-16224 - Technical aspects of nut design
- SS-EN-12512 - Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners
- SS-EN-12512-AM1 - Timber Structures - Test methods - Cyclic testing of joints made with mechanical fasteners
- SS-EN-14399-1 - High-strength structural bolting assemblies for preloading - Part 1: General requirements
- SS-EN-14399-10 - High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
- SS-EN-14399-2 - High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
- SS-EN-14399-3 - High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
- SS-EN-14399-4 - High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
- SS-EN-14399-7 - High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
- SS-EN-14399-8 - High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
- SS-EN-14399-9 - High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
- SS-EN-14592 - Timber structures - Dowel-type fasteners - Requirements
- SS-EN-15048-1 - Non-preloaded structural bolting assemblies - Part 1: General requirements
- SS-EN-15048-2 - Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
- SS-EN-1515-2 - Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
- SS-EN-ISO-10683 - Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2018)
- SS-EN-ISO-10684 - Fasteners - Hot dip galvanized coatings (ISO 10684:2004)
- SS-EN-ISO-15330 - Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999)
- SS-EN-ISO-15480 - Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
- SS-EN-ISO-15481 - Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)
- SS-EN-ISO-15482 - Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999)
- SS-EN-ISO-16047 - Fasteners - Torque/clamp force testing (ISO 16047:2005)
- SS-EN-ISO-16047-AM1 - Fasteners - Torque/clamp force testing (ISO 16047:2005/Amd 1:2012)
- SS-EN-ISO-16048 - Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003)
- SS-EN-ISO-16228 - Fasteners - Types of inspection documents (ISO 16228:2017)
- SS-EN-ISO-16426 - Fasteners - Quality assurance system (ISO 16426:2002)
- SS-EN-ISO-1891-2 - Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014)
- SS-EN-ISO-1891-2-AM1 - Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings - Amendment 1 (ISO 1891-2:2014/Amd 1:2020)
- SS-EN-ISO-1891-4 - Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
- SS-EN-ISO-225 - Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010)
- SS-EN-ISO-3269 - Fasteners - Acceptance inspection (ISO 3269:2019)
- SS-EN-ISO-3506-6 - Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)
- SS-EN-ISO-4032 - Fasteners - Hexagon regular nuts (style 1) (ISO 4032:2023)
- SS-EN-ISO-4035 - Fasteners - Hexagon thin nuts (style 0) (ISO 4035:2023)
- SS-EN-ISO-4042 - Fasteners - Electroplated coating systems (ISO 4042:2022)
- SS-EN-ISO-4753 - Fasteners - Ends of parts with external ISO metric thread (ISO 4753:2011)
- SS-EN-ISO-8673 - Fasteners - Hexagon regular nuts (style 1), with fine pitch thread (ISO 8673:2023)
- SS-EN-ISO-8675 - Fasteners - Hexagon thin nuts (style 0), with fine pitch thread (ISO 8675:2023)
- SS-EN-ISO-888 - Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)
- SS-EN-ISO-898-1 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
- SS-EN-ISO-898-2 - Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)
- SS-EN-ISO-898-3 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
- SS-EN-ISO-898-3-AM1 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)
- SS-EN-ISO-898-5 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
- SS-ISO-1891 - Fasteners - Terminology (ISO 1891:2009, IDT)
- SS-ISO-3506-6 - Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020, IDT)
- SS-ISO-5845-1 - Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles
- SS-ISO-888 - Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, IDT)
- UNE-EN-14399-2 - High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
- UNE-EN-ISO-10683 - Fasteners - Non-electrolytically applied zinc flake coatings