Document Center List of Standards on Noise Emitted By Means Of Transport Including Road Noise, Railway Noise, Harbour Noise And Airport Noise Standards Included In This Group Shall Also Be Included In Other Groups And/Or Sub-Groups According To Their Subject
ICS Code 17.140.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-3539 - Specification for sound level meters for the measurement of noise emitted by motor vehicles
- BS-CEN-1793-5 - Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of sound reflection and airborne sound insulation
- BS-EN-12053 - Safety of industrial trucks. Test methods for measuring noise emissions
- BS-EN-12736 - Electrically propelled road vehicles. Airborne acoustical noise of vehicle during charging with on-board chargers. Determination of sound power level
- BS-EN-14389 - Road traffic noise reducing devices. Procedures for assessing long term performance
- BS-EN-14389-2 - Road traffic noise reducing devices. Procedures for assessing long term performance
- BS-EN-14389-2-TC - Tracked Changes. Road traffic noise reducing devices. Procedures for assessing long term performance
- BS-EN-1501-4 - Refuse collection vehicles. General requirements and safety requirements
- BS-EN-1501-4-TC - Tracked Changes. Refuse collection vehicles. General requirements and safety requirements
- BS-EN-15461 - Railway applications. Noise emission. Characterization of the dynamic properties of track selections for pass by noise measurements
- BS-EN-15610 - Railway applications. Acoustics. Rail and wheel roughness measurement related to noise generation
- BS-EN-16272-1 - Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance
- BS-EN-16272-1-TC - Tracked Changes. Railway applications. Infrastructure. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance
- BS-EN-16272-2 - Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance
- BS-EN-16272-2-TC - Tracked Changes. Railway applications. Infrastructure. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance
- BS-EN-16272-3-1 - Railway applications. Infrastructure. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance
- BS-EN-16272-3-2 - Railway applications. Infrastructure. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance
- BS-EN-16272-6 - Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance
- BS-EN-17285 - Railway applications. Acoustics. Measuring of door audible warnings
- BS-EN-17495 - Railway Applications. Acoustics. Determination of the dynamic stiffness of elastic track components related to noise and vibration: Rail pads and rail fastening assemblies
- BS-EN-1793-1 - Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-1-TC - Tracked Changes. Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-2 - Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-2-TC - Tracked Changes. Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-4 - Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-5 - Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-6 - Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-1793-6-TC - Tracked Changes. Road traffic noise reducing devices. Test method for determining the acoustic performance
- BS-EN-IEC-61265 - Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
- BS-EN-IEC-61265-TC - Tracked Changes. Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
- BS-EN-ISO-11819-1 - Acoustics. Measurement of the influence of road surfaces on traffic noise
- BS-EN-ISO-11819-2 - Acoustics. Measurement of the influence of road surfaces on traffic noise
- BS-EN-ISO-13473-1 - Characterization of pavement texture by use of surface profiles
- BS-EN-ISO-13473-5 - Characterization of pavement texture by use of surface profiles
- BS-EN-ISO-14509 - Small Craft - Measurement of Airborne Sound Emitted by Powered Recreational Craft
- BS-EN-ISO-14509-1 - Small craft. Airborne sound emitted by powered recreational craft
- BS-EN-ISO-14509-1-TC - Tracked Changes. Small craft. Airborne sound emitted by powered recreational craft
- BS-EN-ISO-14509-2 - Small craft. Airborne sound emitted by powered recreational craft
- BS-EN-ISO-14509-3 - Small craft. Airborne sound emitted by powered recreational craft
- BS-EN-ISO-14509-3-TC - Tracked Changes. Small craft. Airborne sound emitted by powered recreational craft
- BS-EN-ISO-2922 - Acoustics. Measurement of airborne sound emitted by vessels on inland waterways and harbours
- BS-EN-ISO-3095 - Acoustics. Railway applications. Measurement of noise emitted byrailbound vehicles
- BS-EN-ISO-3381 - Railway applications. Acoustics. Noise measurement inside railbound vehicles
- BS-ISO-10844 - Acoustics. Specification of test tracks for measuring sound emitted by road vehicles and their tyres
- BS-ISO-10844-TC - Tracked Changes. Acoustics. Specification of test tracks for measuring sound emitted by road vehicles and their tyres
- BS-ISO-13325 - Tyres. Coast-by methods for measurement of tyre-to-road sound emission. Uncertainties
- BS-ISO-13472-1 - Acoustics. Measurement of sound absorption properties of road surfaces in situ
- BS-ISO-13472-1-TC - Tracked Changes. Acoustics. Measurement of sound absorption properties of road surfaces in situ
- BS-ISO-13473-2 - Characterization of pavement texture by use of surface profiles
- BS-ISO-13473-3 - Characterization of pavement texture by use of surface profiles
- BS-ISO-13473-4 - Characterization of pavement texture by use of surface profiles
- BS-ISO-13473-4-TC - Tracked Changes. Characterization of pavement texture by use of surface profiles
- BS-ISO-13473-5 - Characteristics of Pavement Texture by Use of Surface Profiles, Determination of Megat
- BS-ISO-16254 - Acoustics. Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation. Engineering method
- BS-ISO-17208-1 - Underwater acoustics. Quantities and procedures for description and measurement of underwater sound from ships
- BS-ISO-17208-1-TC - Tracked Changes. Underwater acoustics. Quantities and procedures for description and measurement of underwater sound from ships
- BS-ISO-17208-2 - Underwater acoustics. Quantities and procedures for description and measurement of underwater sound from ships
- BS-ISO-18405 - Underwater acoustics. Terminology
- BS-ISO-18406 - Underwater acoustics. Measurement of radiated underwater sound from percussive pile driving
- BS-ISO-20283-3 - Mechanical vibration. Measurement of vibration on ships
- BS-ISO-20283-4 - Mechanical vibration. Measurement of vibration on ships
- BS-ISO-20906 - Acoustics. Unattended monitoring of aircraft sound in the vicinity of airports
- BS-ISO-362-1 - Measurement of noise emitted by accelerating road vehicles. Engineering method
- BS-ISO-362-1-TC - Tracked Changes. Acoustics. Engineering method for measurement of noise emitted by accelerating road vehicles
- BS-ISO-362-3 - Acoustics. Measurement of noise emitted by accelerating road vehicles. Engineering method
- BS-ISO-362-3-TC - Tracked Changes. Acoustics. Measurement of noise emitted by accelerating road vehicles. Engineering method
- BS-ISO-5128 - Acoustics. Measurement of interior vehicle noise
- BS-ISO-5129 - Acoustics. Measurement of sound pressure levels in the interior of aircraft during flight
- BS-ISO-5130 - Acoustics. Measurements of sound pressure level emitted by stationary road vehicles
- DD-ISO-13473-4 - Characterization of pavement texture by use of surface profiles
- PD-CEN-15874 - Railway applications. Noise emission. Road test of standard for rail roughness measurement EN 15610:2009
- PD-CEN-16891 - Railway applications. Acoustics. Measurement method for combined roughness, track decay rates and transfer functions
- PD-CEN-17812 - Determination of the acoustic properties of markings. The CPX measurement method
- PD-ISO-11819-3 - Acoustics. Measurement of the influence of road surfaces on traffic noise
- PD-ISO-13471-1 - Acoustics. Temperature influence on tyre/road noise measurement
- PD-ISO-13471-2 - Acoustics. Temperature influence on tyre/road noise measurement
- PD-ISO/PAS-11819-4 - Acoustics. Method for measuring the influence of road surfaces on traffic noise
- PD-ISO/PAS-17208-1 - Acoustics. Quantities and procedures for description and measurement of underwater sound from ships
ISO:
- ISO-10844 - Acoustics - Specification of test tracks for measuring sound emitted by road vehicles and their tyres
- ISO-11819-1 - Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method
- ISO-11819-2 - Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method
- ISO-11819-3 - Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 3: Reference tyres
- ISO-13325 - Tyres - Coast-by methods for measurement of tyre-to-road sound emission
- ISO-13325-AM1 - - Amendment 1: Tyres - Coast-by methods for measurement of tyre-to-road sound emission - Amendment 1: Uncertainties
- ISO-13471-1 - Acoustics - Temperature influence on tyre/road noise measurement - Part 1: Correction for temperature when testing with the CPX method
- ISO-13471-2 - Acoustics - Temperature influence on tyre/road noise measurement - Part 2: Correction for temperature when testing with the pass-by methods
- ISO-13472-1 - Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method
- ISO-13472-2 - Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces
- ISO-13473-1 - Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth
- ISO-13473-2 - Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis
- ISO-13473-3 - Characterization of pavement texture by use of surface profiles - Part 3: Specification and classification of profilometers
- ISO-13473-4 - Characterization of pavement texture by use of surface profiles - Part 4: One third octave band spectral analysis of surface profiles
- ISO-13473-5 - Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture
- ISO-14509 - Small Craft - Measurement of Airborne Sound Emitted by Powered Recreational Craft
- ISO-14509-1 - Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures
- ISO-14509-2 - Small craft - Airborne sound emitted by powered recreational craft - Part 2: Sound assessment using reference craft
- ISO-14509-3 - Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures
- ISO-14509/A1 - Amendment 1: Small Craft - Measurement of Airborne Sound Emitted by Powered Recreation
- ISO-16254 - Acoustics - Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation - Engineering method
- ISO-17208-1 - Underwater acoustics - Quantities and procedures for description and measurement of underwater sound from ships - Part 1: Requirements for precision measurements in deep water used for comparison purposes
- ISO-17208-1-AM1 - - Amendment 1: Underwater acoustics - Quantities and procedures for description and measurement of underwater sound from ships - Part 1: Requirements for precision measurements in deep water used for comparison purposes - Amendment 1
- ISO-17208-2 - Underwater acoustics - Quantities and procedures for description and measurement of underwater sound from ships - Part 2: Determination of source levels from deep water measurements
- ISO-18405 - Underwater acoustics - Terminology
- ISO-18406 - Underwater acoustics - Measurement of radiated underwater sound from percussive pile driving
- ISO-20283-2 - Mechanical vibration - Measurement of vibration on ships - Part 2: Measurement of structural vibration
- ISO-20283-3 - Mechanical vibration - Measurement of vibration on ships - Part 3: Pre-installation vibration measurement of shipboard equipment
- ISO-20283-3-AM1 - - Amendment 1
- ISO-20283-4 - Mechanical vibration - Measurement of vibration on ships - Part 4: Measurement and evaluation of vibration of the ship propulsion machinery
- ISO-20283-4-AM1 - - Amendment 1
- ISO-20906 - Acoustics - Unattended monitoring of aircraft sound in the vicinity of airports
- ISO-20906-AM1 - - Amendment 1
- ISO-20908 - Tyre sound emission test - Methods of drum
- ISO-2671 - Environmental tests for aircraft equipment - Part 3.4 : Acoustic vibration
- ISO-2922 - Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours
- ISO-2922-AM1 - - Amendment 1
- ISO-2923 - Acoustics - Measurement of noise on board vessels
- ISO-3095 - Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles
- ISO-3381 - Railway applications - Acoustics - Noise measurement inside railbound vehicles
- ISO-362 - Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method
- ISO-362-1 - Acoustics - Engineering method for measurement of noise emitted by accelerating road vehicles - Part 1: M and N categories
- ISO-362-2 - Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category
- ISO-362-3 - Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 3: Indoor testing M and N categories
- ISO-3891 - Acoustics - Procedure for describing aircraft noise heard on the ground
- ISO-5128 - Acoustics - Measurement of interior vehicle noise
- ISO-5129 - Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight
- ISO-5129-AM1 - - Amendment 1
- ISO-5130 - Acoustics - Measurements of sound pressure level emitted by stationary road vehicles
- ISO-5130-AM1 - Acoustics - Measurement of noise emitted by stationary road vehicles - Survey method - Amendment 1
- ISO-7188 - Acoustics - Measurement of noise emitted by passenger cars under conditions representative of urban driving
- ISO-9645 - Acoustics - Measurement of noise emitted by two-wheeled mopeds in motion - Engineering method
- ISO/PAS-11819-4 - Acoustics - Method for measuring the influence of road surfaces on traffic noise - Part 4: SPB method using backing board
- ISO/PAS-17208-1 - Acoustics - Quantities and procedures for description and measurement of underwater sound from ships - Part 1: General requirements for measurements in deep water
Other SDOs:
- DIN-EN-ISO-14509-2 - Part 2: Sound Assessment Using Reference Craft, Small Craft - Airborne Sound Emitted
- DIN-EN-ISO-14509/A1 - Amendment 1: Small Craft, Measurement of Airborne Sound Emitted by Powered Recreationa
- DIN-EN-ISO-3095 - Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
- DIN-EN-ISO-3381 - Railway Applications - Acoustics - Measurement of Noise Inside Railbound Vehicles
- DIN-ISO-13472-1 - Part 1: Extended Surface Method, Acoustics, Measurement of Sound Absorption Properties
- DIN-ISO-362 - Acoustics, Measurement of Noise Emitted by Accelerating Roadvehicles, Engineering Meth
- EN-1501-4 - Refuse Collection Vehicles & Their Associated Lifting Devices, General Requirements &
- EN-15461 - Railway Applications - Noise Emission - Characterization of the Dynamic Properties Of
- EN-15610 - Railway Applications - Noise Emission - Rail Roughness Measurement Related To Rolling
- EN-15892 - Railway applications - Noise Emission - Measurement of noise inside driver's cabs
- EN-16272-3-2 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct field applications
- EN-16272-6 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- EN-1793-1 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
- EN-1793-2 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
- EN-1793-4 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
- EN-1793-5 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
- EN-1793-6 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- EN-ISO-11819-2 - Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method
- EN-ISO-13473-5 - Part 5: Determination of Megatexture, Characterization of Pavement Texture by Use of S
- EN-ISO-14509-1 - Part 1: Pass-by Measurement Procedures, Small Craft- Airborne Sound Emitted by Powered
- EN-ISO-14509-2 - Part 2: Sound Assessment Using Reference Craft, Small Craft - Airborne Sound Emitted
- EN-ISO-14509-3 - Part 3: Sound Assessment Using Calculation & Measurement Procedures, Craft - Airborne
- EN-ISO-14509/A1 - Amendment 1: Small Craft, Measurement of Airborne Sound Emitted by Powered Recreationa
- EN-ISO-2922 - Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000/Amd 1:2013)
- EN-ISO-3095 - Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
- EN-ISO-3381 - Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005)
- SIS-CEN/TR-16891 - Railway applications - Acoustics - Measurement method for combined roughness, track decay rates and transfer functions
- SIS-CEN/TS-17812 - Determination of the acoustic properties of markings - The CPX measurement method
- SIS-CEN/TS-1793-4 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
- SIS-CEN/TS-1793-5 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection and airborne sound insulation
- SIS-ISO/TS-11819-3 - Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 3: Reference tyres (ISO/TS 11819-3:2021)
- SS-EN-12053 - Safety of industrial trucks - Test methods for measuring noise emissions
- SS-EN-12736 - Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level
- SS-EN-1501-4 - Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles
- SS-EN-15461 - Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements
- SS-EN-15610 - Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
- SS-EN-15892 - Railway applications - Noise Emission - Measurement of noise inside driver's cabs
- SS-EN-16272-3-2 - Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct sound field applications
- SS-EN-16272-4 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field
- SS-EN-16272-6 - Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- SS-EN-17285 - Railway applications - Acoustics - Measuring of door audible warnings
- SS-EN-17495 - Railway Applications - Acoustics - Determination of the dynamic stiffness of elastic track components related to noise and vibration: Rail pads and rail fastening assemblies
- SS-EN-1793-1 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
- SS-EN-1793-2 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
- SS-EN-1793-4 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
- SS-EN-1793-5 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
- SS-EN-1793-6 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- SS-EN-ISO-11819-1 - Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:2023)
- SS-EN-ISO-11819-2 - Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method (ISO 11819-2:2017)
- SS-EN-ISO-13473-1 - Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:2019)
- SS-EN-ISO-13473-5 - Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
- SS-EN-ISO-14509 - Measurement of airborne sound emitted by powered recreational craft (ISO 14509:2000)
- SS-EN-ISO-14509-1 - Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008)
- SS-EN-ISO-14509-2 - Small craft - Airborne sound emitted by powered recreational craft - Part 2: Sound assessment using reference craft (ISO 14509-2:2006)
- SS-EN-ISO-14509-3 - Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009)
- SS-EN-ISO-14509-AM1 - Small craft - Measurement of airborne sound emitted by powered recreational craft - Amendment 1 (ISO 14509:2000/Amd 1:2004)
- SS-EN-ISO-2922 - Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2020)
- SS-EN-ISO-2922-AM1 - Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000/Amd 1:2013)
- SS-EN-ISO-3095 - Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
- SS-EN-ISO-3381 - Railway applications - Acoustics - Noise measurement inside railbound vehicles (ISO 3381:2021)
- SS-EN-ISO-3745 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)
- SS-EN-ISO-3745-AM1 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms - Amendment 1 (ISO 3745:2012/Amd 1:2017)
- SS-ISO-10844 - Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres (ISO 10844:2021, IDT)
- SS-ISO-11819-1 - Acoustics - Measurement of the influence of road surfaces on traffic noice - Part 1: Statistical Pass-By method
- SS-ISO-13325 - Tyres - Coast-by methods for measurement of tyre-to-road sound emission
- SS-ISO-13472-1 - Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method (ISO 13472-1:2022, IDT)
- SS-ISO-13472-2 - Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces (ISO 13472-2:2010, IDT)
- SS-ISO-13473-1 - Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth
- SS-ISO-13473-2 - Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis
- SS-ISO-13473-3 - Characterization of pavement texture by use of surface profiles - Part 3: Specification and classification of profilometers
- SS-ISO-13473-5 - Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009, IDT)
- SS-ISO-16254 - Acoustics - Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation - Engineering method (ISO 16254:2016, IDT)
- SS-ISO-20906 - Acoustics - Unattended monitoring of aircraft sound in the vicinity of airports (ISO 20906:2009, IDT)
- SS-ISO-20906-AM1 - Acoustics Unattended monitoring of aircraft sound in the vicinity of airports Amendment 1 (ISO 20906:2009/Amd 1:2013, IDT)
- SS-ISO-2922 - Acoustics - Measurement of noise emitted by vessels on inland waterways and harbours
- SS-ISO-3095 - Acoustics - Measurement of noise emitted by railbound vehicles
- SS-ISO-362 - Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category (ISO 362-2:2009, IDT)
- SS-ISO-362-1 - Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories (ISO 362-1:2015, IDT)
- SS-ISO-362-2 - Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category (ISO 362-2:2009, IDT)
- SS-ISO-5128 - Acoustics - Measurement of noise inside motor vehicles
- SS-ISO-5129 - Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight
- SS-ISO-5129-AM1 - Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight - Amendment 1 (ISO 5129:2001/Amd 1:2013, IDT)
- SS-ISO-5130 - Acoustics - Measurements of sound pressure level emitted by stationary road vehicles (ISO 5130:2019, IDT)
- SS-ISO-5130-AM1 - Acoustics - Measurements of sound pressure level emitted by stationary road vehicles - Amendment 1 (ISO 5130:2007/Amd 1:2012, IDT)
- SS-ISO-8002 - Vibration and shock - Mechanical vibrations - Land vehicles - Method for reporting measured data
- UNE-EN-1793-1 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption
- UNE-EN-ISO-3095 - Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles