Document Center List of Standards on Acoustic Measurements And Noise Abatement In General Including Acoustic Insulation
ICS Code 17.140.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-E1014 - Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
- ASTM-E1065 - Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
- ASTM-E1106 - Standard Test Method for Primary Calibration of Acoustic Emission Sensors
- ASTM-E1110 - Standard Classification for Determination of Articulation Class
- ASTM-E1124 - Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
- ASTM-E1130 - Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
- ASTM-E1139 - Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
- ASTM-E1179 - Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
- ASTM-E1211 - Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
- ASTM-E1265 - Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
- ASTM-E1289 - Standard Specification for Reference Specimen for Sound Transmission Loss
- ASTM-E1503 - Standard Test Method for Conducting Outdoor Sound Measurements Using a Statistical Sound Analysis System
- ASTM-E1686 - Standard Guide for Applying Environmental Noise Measurement Methods and Criteria
- ASTM-E1704 - Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
- ASTM-E1774 - Standard Guide for Electromagnetic Acoustic Transducers (EMATs)
- ASTM-E1779 - Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements (Withdrawn 2012)
- ASTM-E1780 - Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
- ASTM-E1781 - Standard Practice for Secondary Calibration of Acoustic Emission Sensors
- ASTM-E1932 - Standard Guide for Acoustic Emission Examination of Small Parts
- ASTM-E2191 - Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission
- ASTM-E2202 - Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
- ASTM-E2374 - Standard Guide for Acoustic Emission System Performance Verification
- ASTM-E2611 - Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based on the Transfer Matrix Method
- ASTM-E597 - Practice for Determining A Single-Number Rating of Airborne Sound Isolation for Use in Multiunit Building Specifications (Withdrawn 1999)
- ASTM-E650 - Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors
- ASTM-E664 - Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
- ASTM-E976 - Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
- ASTM-F1430 - Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments
- ASTM-F2174 - Standard Practice for Verifying Acoustic Emission Sensor Response
BSI:
- BS-3383 - Specification for Normal Equal-Loudness Level Contours for Pure Tones Under Free-Field
- BS-4196-1 - Sound power levels of noise sources. Precision methods for determination of sound power levels for broad-band sources in reverberation rooms
- BS-4196-5 - Sound power levels of noise sources. Precision methods for determination of sound power levels for sources in anechoic and semi-anechoic rooms
- BS-4196-8 - Sound power levels of noise sources. Specification for the performance and calibration of reference sound sources
- BS-7445-1 - Description and measurement of environmental noise
- BS-EN-13477-1 - Non-destructive testing. Acoustic emission. Equipment characterization
- BS-EN-13477-2 - Non-destructive testing. Acoustic emission testing. Equipment characterisation
- BS-EN-21683 - Acoustics. Preferred reference quantities for acoustic levels
- BS-EN-IEC-60118-16 - Electroacoustics. Hearing aids
- BS-EN-ISO-10534-1 - Acoustics. Determination of sound absorption coefficient and impedance in impedances tubes
- BS-EN-ISO-10534-2 - Acoustics. Determination of acoustic properties in impedance tubes
- BS-EN-ISO-10534-2-TC - Tracked Changes. Acoustics. Determination of acoustic properties in impedance tubes
- BS-EN-ISO-10846-1 - Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements
- BS-EN-ISO-10846-2 - Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements
- BS-EN-ISO-10846-3 - Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements
- BS-EN-ISO-10846-4 - Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements
- BS-EN-ISO-10846-5 - Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements
- BS-EN-ISO-11205 - Acoustics. Noise emitted by machinery and equipment. Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
- BS-EN-ISO-11546-1 - Acoustics. Determination of sound insulation performances of enclosures
- BS-EN-ISO-11546-2 - Acoustics. Determination of sound insulation performances of enclosures
- BS-EN-ISO-11820 - Acoustics. Measurements on silencers in situ
- BS-EN-ISO-11904-1 - Acoustics. Determination of sound immission from sound sources placed close to the ear.
- BS-EN-ISO-11904-2 - Acoustics. Determination of sound immission from sound sources placed close to the ear
- BS-EN-ISO-11957 - Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements
- BS-EN-ISO-12999-1 - Acoustics. Determination and application of measurement uncertainties in building acoustics
- BS-EN-ISO-12999-2 - Acoustics. Determination and application of measurement uncertainties in building acoustics
- BS-EN-ISO-15667 - Acoustics. Guidelines for noise control by enclosures and cabins
- BS-EN-ISO-1683 - Acoustics. Preferred reference values for acoustical and vibratory levels
- BS-EN-ISO-1683-TC - Tracked Changes. Acoustics. Preferred reference values for acoustical and vibratory levels
- BS-EN-ISO-21388 - Acoustics. Hearing aid fitting management (HAFM)
- BS-EN-ISO-21388-2 - Acoustics. Hearing aid fitting management
- BS-EN-ISO-26101-1 - Acoustics. Test methods for the qualification of the acoustic environment
- BS-EN-ISO-26101-2 - Acoustics. Test methods for the qualification of the acoustic environment
- BS-EN-ISO-26101-2-TC - Tracked Changes. Acoustics. Test methods for the qualification of the acoustic environment
- BS-EN-ISO-266 - Acoustics. Preferred frequencies
- BS-EN-ISO-3741 - Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for reverberation test rooms
- BS-EN-ISO-3743-1 - Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for small movable sources in reverberant fields
- BS-EN-ISO-3743-2 - Acoustics. Determination of sound power levels of noise sources using sound pressure. Engineering methods for small, movable sources in reverberant fields
- BS-EN-ISO-3744 - Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
- BS-EN-ISO-3745 - Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for anechoic rooms and hemi-anechoic rooms
- BS-EN-ISO-3746 - Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
- BS-EN-ISO-3747 - Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment
- BS-EN-ISO-5114-1 - Acoustics. Determination of uncertainties associated with sound emission measures
- BS-EN-ISO-6926 - Acoustics. Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
- BS-EN-ISO-6926-TC - Tracked Changes. Acoustics. Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
- BS-EN-ISO-9053-1 - Acoustics. Determination of airflow resistance
- BS-EN-ISO-9053-2 - Acoustics. Determination of airflow resistance
- BS-EN-ISO-9614-1 - Acoustics. Determination of sound power levels of noise sources using sound intensity
- BS-EN-ISO-9614-3 - Acoustics. Determination of sound power levels of noise sources using sound intensity
- BS-ISO-12913-1 - Acoustics. Soundscape
- BS-ISO-13474 - Acoustics. Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
- BS-ISO-16832 - Acoustics. Loudness scaling by means of categories
- BS-ISO-17534-1 - Acoustics. Software for the calculation of sound outdoors
- BS-ISO-18405 - Underwater acoustics. Terminology
- BS-ISO-21388 - Acoustics. Hearing aid fitting management (HAFM)
- BS-ISO-26101 - Acoustics. Test methods for the qualification of free-field environments
- BS-ISO-26101-1-TC - Tracked Changes. Acoustics. Test methods for the qualification of the acoustic environment
- BS-ISO-26101-TC - Tracked Changes. Acoustics. Test methods for the qualification of free-field environments
- BS-ISO-532-1 - Acoustics. Methods for calculating loudness
- BS-ISO-532-2 - Acoustics. Methods for calculating loudness
- BS-ISO-532-3 - Acoustics. Methods for calculating loudness
- BS-ISO-9613-2 - Acoustics. Attenuation of sound during propagation outdoors
- DD-ISO-13474 - Acoustics, Impulse Sound Propagation for Environmental Noise Assessment
- PD-IEC-63001 - Measurement of cavitation noise in ultrasonic baths and ultrasonic reactors
- PD-IEC-63001-TC - Tracked Changes. Measurement of cavitation noise in ultrasonic baths and ultrasonic reactors
- PD-ISO-12913-2 - Acoustics. Soundscape
- PD-ISO-12913-3 - Acoustics. Soundscape
- PD-ISO-17534-2 - Acoustics. Software for the calculation of sound outdoors
- PD-ISO-17534-4 - Acoustics. Software for the calculation of sound outdoors
- PD-ISO-20065 - Acoustics. Objective method for assessing the audibility of tones in noise. Engineering method
- PD-ISO-20065-TC - Tracked Changes. Acoustics. Objective method for assessing the audibility of tones in noise. Engineering method
- PD-ISO-25417 - Acoustics. Definitions of basic quantities and terms
- PD-ISO/PAS-20065 - Acoustics. Objective method for assessing the audibility of tones in noise. Engineering method
IEC:
- IEC-1012 - Filters for the measurement of audible sound in the presence of ultrasound
- IEC-60050-801-AM1 - Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
- IEC-60050-801-AM4 - Amendment 4 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
- IEC-63001 - Measurement of cavitation noise in ultrasonic baths and ultrasonic reactors
- IEC-63001-RL - Measurement of cavitation noise in ultrasonic baths and ultrasonic reactors
ISO:
- ISO-10534-1 - Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 1: Method using standing wave ratio
- ISO-10534-2 - Acoustics - Determination of acoustic properties in impedance tubes - Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance
- ISO-10846-1 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines
- ISO-10846-2 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
- ISO-10846-3 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
- ISO-10846-4 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
- ISO-10846-5 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
- ISO-10847 - Acoustics - In-situ determination of insertion loss of outdoor noise barriers of all types
- ISO-11205 - Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
- ISO-11546-1 - Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes)
- ISO-11546-2 - Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes)
- ISO-11821 - Acoustics - Measurement of the in situ sound attenuation of a removable screen
- ISO-11904-1 - Acoustics -- Determination of sound immission from sound sources placed close to the ear -- Part 1: Technique using a microphone in a real ear (MIRE technique) (available in English only)
- ISO-11904-2 - Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin
- ISO-11957 - Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements
- ISO-12913-1 - Acoustics - Soundscape - Part 1: Definition and conceptual framework
- ISO-12913-2 - Acoustics - Soundscape - Part 2: Data collection and reporting requirements
- ISO-12913-3 - Acoustics - Soundscape - Part 3: Data analysis
- ISO-12999-1 - Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation
- ISO-12999-2 - Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2: Sound absorption
- ISO-13474 - Acoustics - Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
- ISO-13954-AM1 - - Amendment 1: Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
- ISO-14163 - Acoustics - Guidelines for noise control by silencers
- ISO-15667 - Acoustics -- Guidelines for noise control by enclosures and cabins
- ISO-16 - Acoustics - Standard tuning frequency (Standard musical pitch)
- ISO-1683 - Acoustics - Preferred reference values for acoustical and vibratory levels
- ISO-16832 - Acoustics - Loudness scaling by means of categories
- ISO-1683-RL - Acoustics - Preferred reference values for acoustical and vibratory levels (includes Redline Version)
- ISO-17534-1 - Acoustics - Software for the calculation of sound outdoors - Part 1: Quality requirements and quality assurance
- ISO-17534-2 - Acoustics - Software for the calculation of sound outdoors - Part 2: General recommendations for test cases and quality assurance interface
- ISO-17534-3 - Acoustics - Software for the calculation of sound outdoors - Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1
- ISO-17534-4 - Acoustics - Software for the calculation of sound outdoors - Part 4: Recommendations for a quality assured implementation of the COMMISSION DIRECTIVE (EU) 2015/996 in software according to ISO 17534-1
- ISO-18405 - Underwater acoustics - Terminology
- ISO-1996-2 - Acoustics - Description, measurement and assessment of environmental noise - Part 2: Determination of sound pressure levels
- ISO-20065 - Acoustics - Objective method for assessing the audibility of tones in noise - Engineering method
- ISO-21388 - Acoustics - Hearing aid fitting management (HAFM)
- ISO-21388-2 - Acoustics - Hearing aid fitting management - Part 2: Tele-services as part of hearing aid fitting management (tHAFM)
- ISO-2249 - Acoustics - Description and Measurement of Physical Propertiesof Sonic Booms
- ISO-25417 - Acoustics - Definitions of basic quantities and terms
- ISO-26101 - Acoustics - Test methods for the qualification of free-field environments
- ISO-26101-1 - Acoustics - Test methods for the qualification of the acoustic environment - Part 1: Qualification of free-field environments
- ISO-26101-2 - Acoustics - Test methods for the qualification of the acoustic environment - Part 2: Determination of the environmental correction
- ISO-266 - Acoustics - Preferred frequencies
- ISO-3740 - Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards
- ISO-3741 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms
- ISO-3743-1 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room
- ISO-3743-2 - Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms
- ISO-3744 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
- ISO-3745 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms
- ISO-3745-AM1 - - Amendment 1
- ISO-3746 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
- ISO-3747 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment
- ISO-5114-1 - Acoustics - Determination of uncertainties associated with sound emission measures - Part 1: Sound power levels determined from sound pressure measurements
- ISO-532 - Acoustics - Method for calculating loudness level
- ISO-532-1 - Acoustics - Methods for calculating loudness - Part 1: Zwicker method
- ISO-532-2 - Acoustics - Methods for calculating loudness - Part 2: Moore-Glasberg method
- ISO-532-3 - Acoustics - Methods for calculating loudness - Part 3: Moore-Glasberg-Schlittenlacher method
- ISO-6926 - Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
- ISO-6926-AM1 - - Amendment 1
- ISO-7196 - Acoustics - Frequency-weighting characteristic for infrasound measurements
- ISO-9613-1 - Acoustics - Attenuation of sound during propagation outdoors - Part 1: Calculation of the absorption of sound by the atmosphere
- ISO-9613-2 - Acoustics - Attenuation of sound during propagation outdoors - Part 2: Engineering method for the prediction of sound pressure levels outdoors
- ISO-9614-1 - Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points
- ISO-9614-2 - Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning
- ISO-9614-3 - Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning
- ISO/PAS-1996-3 - Acoustics - Description, measurement and assessment of environmental noise - Part 3: Objective method for the measurement of prominence of impulsive sounds and for adjustment of L Aeq
- ISO/PAS-20065 - Acoustics - Objective method for assessing the audibility of tones in noise - Engineering method
Other SDOs:
- DIN-18041 - Acoustic quality in rooms - Specifications and instructions for the room acoustic design
- DIN-EN-ISO-354 - Acoustics, Measurement of Sound Absorption in a Reverberation Room
- DIN-EN-ISO-3745 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms
- DIN-EN-ISO-9614-3 - Part 3: Precision Method for Measurement by Scanning, Acoustics - Determination of Sou
- EN-ISO-10534-1 - Part 1: Method Using Standing Wave Ratio, Acoustics, Determination of Sound Absorption
- EN-ISO-10534-2 - Part 2: Transfer-Function Method, Acoustics, Determination of Sound Absorption Coeffic
- EN-ISO-10846-1 - Acoustics & Vibration, Laboratory Measurement of VIBRO-Acoustic Transfer Properties Of
- EN-ISO-10846-2 - Part 2: Direct Method for Determination of the Dynamic Stiffness of Resilient Supports
- EN-ISO-10846-5 - Part 5: Driving Point Method for Determination of the Low-Frequency Transfer Stiffnes
- EN-ISO-11205 - Acoustics, Noise Emitted by Machinery & Equipment, Engineering Method for the Determin
- EN-ISO-11546-1 - Acoustics, Determination of Sound Insulation Performances of Enclosures, Measurements
- EN-ISO-11546-2 - Acoustics, Determination of Sound Insulation Performances of Enclosures, Measurements
- EN-ISO-11820 - Acoustics, Measurements on Silencers in Situ
- EN-ISO-11904-2 - Part 2: Technique Using a Manikin, Acoustics, Determination of Sound Immission From S
- EN-ISO-11957 - Acoustics, Determination of Sound Insulation Performance of Cabins, Laboratory & in S
- EN-ISO-12999-1 - Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation
- EN-ISO-1683 - Acoustics - Preferred reference values for acoustical and vibratory levels
- EN-ISO-266 - Acoustics, Preferred Frequencies
- EN-ISO-3741 - Acoustics - Determination of Sound Power Levels & Sound Energy Levels of Noise Sources
- EN-ISO-3743-1 - Part 1: Comparison Method for a Hard-Walled Test Room, Acoustics - Determination of So
- EN-ISO-3743-2 - Acoustics, Determination of Sound Power Levels of Noise Sources Using Sound Pressure,
- EN-ISO-3744 - Acoustics - Determination of Sound Power Levels & Sound Energy Levels of Noise Sources
- EN-ISO-3745 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms
- EN-ISO-3746 - Acoustics - Determination of Sound Power Levels & Sound Energy Levels of Noise Sources
- EN-ISO-3747 - Acoustics - Determination of Sound Power Levels & Sound Energy Levels of Noise Sources
- EN-ISO-6926 - Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
- EN-ISO-9614-1 - Acoustics, Determination of Sound Power Levels of Noise Sources Using Sound Intensity,
- EN-ISO-9614-3 - Acoustics, Determination of Sound Power Levels of Noise Sources Using Sound Intensity,
- SIS-ISO/TR-17534-3 - Acoustics - Software for the calculation of sound outdoors - Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1 (ISO/TR 17534-3:2015, IDT)
- SIS-ISO/TR-25417 - Acoustics - Definitions of basic quantities and terms
- SIS-ISO/TS-13474 - Acoustics - Impulse sound propagation for environmental noise assessment
- SS-EN-12697-21 - Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens
- SS-EN-20354-AM1 - Acoustics - Measurement of sound absorption in a reverbaration room - Amendment 1: Test specimen mountings for sound absorption tests (ISO 354:1985/Amd 1:1997)
- SS-EN-21683 - Acoustics - Preferred reference quantities for acoustic levels
- SS-EN-ISO-10534-1 - Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1: Method using standing wave ratio (ISO 10534-1:1996)
- SS-EN-ISO-10534-2 - Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 2: Transfer-function method (ISO 10534-2:1998)
- SS-EN-ISO-10846-1 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008)
- SS-EN-ISO-10846-2 - Acoustics and vibration - Laboratory measurement of vibroacoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
- SS-EN-ISO-10846-3 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002)
- SS-EN-ISO-10846-4 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003)
- SS-EN-ISO-10846-5 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008)
- SS-EN-ISO-11205 - Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
- SS-EN-ISO-11546-1 - Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
- SS-EN-ISO-11546-2 - Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
- SS-EN-ISO-11690-1 - Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:2020)
- SS-EN-ISO-11904-1 - Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using a microphone in a real ear (MIRE technique) (ISO 11904-1:2002)
- SS-EN-ISO-11904-2 - Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2021)
- SS-EN-ISO-11957 - Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
- SS-EN-ISO-12999-1 - Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2020)
- SS-EN-ISO-12999-2 - Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2: Sound absorption (ISO 12999-2:2020)
- SS-EN-ISO-14163 - Acoustics - Guidelines for noise control by silencers (ISO 14163:1998)
- SS-EN-ISO-1683 - Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2015)
- SS-EN-ISO-21388 - Acoustics - Hearing aid fitting management (HAFM) (ISO 21388:2020)
- SS-EN-ISO-26101-1 - Acoustics - Test methods for the qualification of the acoustic environment - Part 1: Qualification of free-field environments (ISO 26101-1:2021)
- SS-EN-ISO-266 - Acoustics - Preferred frequencies (ISO 266:1997)
- SS-EN-ISO-2922 - Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2020)
- SS-EN-ISO-2922-AM1 - Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000/Amd 1:2013)
- SS-EN-ISO-3740 - Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2019)
- SS-EN-ISO-3741 - Acoustics - Determination of sound power levels of noisse sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999)
- SS-EN-ISO-3743-1 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
- SS-EN-ISO-3743-2 - Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018)
- SS-EN-ISO-3744 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
- SS-EN-ISO-3745 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)
- SS-EN-ISO-3745-AM1 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms - Amendment 1 (ISO 3745:2012/Amd 1:2017)
- SS-EN-ISO-3746 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
- SS-EN-ISO-3747 - Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
- SS-EN-ISO-6926 - Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016)
- SS-EN-ISO-6926-AM1 - Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels - Amendment 1 (ISO 6926:2016/Amd 1:2020)
- SS-EN-ISO-9614-1 - Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
- SS-EN-ISO-9614-2 - Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996)
- SS-EN-ISO-9614-3 - Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
- SS-ISO-10846-1 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilientelements - Part 1: Principles and guidelines
- SS-ISO-10846-2 - Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilientelements - Part 2: Dynamic stiffness of elastic supports for translatory motion - Direct method
- SS-ISO-10847 - Acoustics - In-situ determination of insertion loss of outdoor noise barriers of all types
- SS-ISO-12357-1 - Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Part 1: Strength tests for general cargo centre-axle trailers (ISO 12357-1:1999, IDT)
- SS-ISO-12913-1 - Acoustics - Soundscape - Part 1: Definition and conceptual framework (ISO 12913-1:2014, IDT)
- SS-ISO-13474 - Acoustics - Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment (ISO 13474:2009, IDT)
- SS-ISO-16 - Acoustics - Standard tuning frequency (Standard musical pitch)
- SS-ISO-1683 - Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification (ISO 16834:2006)
- SS-ISO-17534-1 - Acoustics - Software for the calculation of sound outdoors - Part 1: Quality requirements and quality assurance (ISO 17534-1:2015, IDT)
- SS-ISO-20189 - Acoustics - Screens, furniture and single objects intended for interior use - Rating of sound absorption and sound reduction of elements based on laboratory measurements (ISO 20189:2018, IDT)
- SS-ISO-21388 - Acoustics - Hearing aid fitting management (HAFM) (ISO 21388:2020, IDT)
- SS-ISO-26101 - Acoustics - Test methods for the qualification of free-field environments (ISO 26101:2012, IDT)
- SS-ISO-3740 - Acoustics - Determination of sound power levels of noise sources guidelines for the use of basic standards and for the preparation of noise test codes
- SS-ISO-3742 - Acoustics - Determination of sound power levels of noise sources - Precision methods for discrete-frequency and narrow-band sources in reverberation rooms
- SS-ISO-3743-2 - Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberent fields - Part 2: Direct method for special reverberation test rooms
- SS-ISO-3745 - Acoustics - Determination of sound power levels of noise sources precision methods for anechoic andsemi-anechoic rooms
- SS-ISO-532 - Acoustics - Method for calculating loudness level
- SS-ISO-6926 - Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
- SS-ISO-7196 - Acoustics - Frequency-weighting characteristics for infrasound measurements
- SS-ISO-9613-1 - Acoustics - Attenuation of sound during propagation outdoors - Part 1: Calculation of the absorption of sound by the atmhosphere
- SS-ISO-9613-2 - Acoustics - Attenuation of sound during propagation outdoors - Part 2: General method of calculation (ISO 9613-2:1996, IDT)
- UNE-EN-ISO-6926 - Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels