Document Center List of Standards on Linear And Angular Measurements In General
ICS Code 17.040.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D5826 - Standard Tables of Body Measurements for Children, Sizes 2 to 6x/7 (Withdrawn 2009)
- ASTM-E1836 - Standard Practice for Building Floor Area Measurements for Facility Management
- ASTM-F2203 - Standard Test Method for Linear Measurement Using Precision Steel Rule
BSI:
- BS-EN-ISO-1 - Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
- BS-EN-ISO-1119 - Geometrical product specifications (GPS). Series of conical tapers and taper angles
- BS-EN-ISO-14253-1 - Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment
- BS-EN-ISO-14253-5 - Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment
- BS-EN-ISO-14638 - Geometrical product specifications (GPS). Matrix model
- BS-EN-ISO-14660-1 - Geometrical product specifications (GPS). Geometrical features
- BS-EN-ISO-14660-2 - Geometrical product specifications (GPS). Geometrical features
- BS-EN-ISO-17450-1 - Geometrical product specifications (GPS). General concepts
- BS-EN-ISO-17450-2 - Geometrical product specifications (GPS). General concepts
- BS-EN-ISO-17450-3 - Geometrical product specifications (GPS). General concepts
- BS-EN-ISO-17450-3-TC - Tracked Changes. Geometrical product specifications (GPS). General concepts
- BS-EN-ISO-17450-4 - Geometrical product specifications (GPS). Basic concepts
- BS-EN-ISO-18391 - Geometrical product specifications (GPS). Population specification
- BS-EN-ISO-1-TC - Tracked Changes. Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
- BS-EN-ISO-20170 - Geometrical product specifications (GPS). Decomposition of geometrical characteristics for manufacturing control
- BS-EN-ISO-21204 - Geometrical product specifications (GPS). Transition specification
- BS-EN-ISO-22432 - Geometrical product specifications (GPS). Features utilized in specification and verification
- BS-EN-ISO-2538 - Geometrical product specifications (GPS). Series of angles and slopes on prisms
- BS-EN-ISO-2538-1 - Geometrical product specifications (GPS). Wedges
- BS-EN-ISO-2538-2 - Geometrical product specifications (GPS). Wedges
- BS-EN-ISO-5458-TC - Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
- BSI CONVERSION SLIDE - Conversion factors for units
- BS-ISO-1101 - Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings
- DD-CEN-ISO-12780-2 - Geometrical product specifications (GPS). Straightness
- DD-CEN-ISO-12781-1 - Geometrical product specifications (GPS). Flatness
- DD-CEN-ISO-12781-2 - Geometrical Product Specifications (Gps), Flatness, Specification Operators
- DD-CEN-ISO-14253-3 - Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment
- DD-CEN-ISO-14253-4 - Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment
- DD-CEN-ISO-17450-1 - Geometrical product specifications (GPS). General concepts
- DD-ENV-ISO-14253-2 - Geometrical Product Specifications (Gps), Inspection by Measurement of Workpieces & Me
- DD-ISO-17450-1 - Geometrical Product Specifications (Gps), General Concepts, Model for Geometrical SPE
- DD-ISO-17450-2 - Geometrical product specifications (GPS). General concepts
- PD-ISO-17863 - Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
- PD-ISO-17865 - Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
ISO:
- ISO-1 - Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties
- ISO-1119 - Geometrical product specifications (GPS) - Series of conical tapers and taper angles
- ISO-14253-1 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications
- ISO-14253-2 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
- ISO-14253-3 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements
- ISO-14253-4 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules
- ISO-14253-5 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments
- ISO-14253-6 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
- ISO-14406 - Geometrical product specifications (GPS) - Extraction
- ISO-14638 - Geometrical product specifications (GPS) - Matrix model
- ISO-14660-1 - Geometrical Product Specifications (GPS) -- Geometrical features -- Part 1: General terms and definitions
- ISO-14660-2 - Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
- ISO-15530-1 - Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics
- ISO-16015 - Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
- ISO-17450-1 - Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification
- ISO-17450-2 - Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
- ISO-17450-3 - Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features
- ISO-17863 - Geometrical product specification (GPS) - Geometrical tolerancing of moveable assemblies
- ISO-17865 - Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
- ISO-18391 - Geometrical product specifications (GPS) - Population specification
- ISO-21204 - Geometrical product specifications (GPS) - Transition specification
- ISO-22432 - Geometrical product specifications (GPS) - Features utilized in specification and verification
- ISO-25378 - Geometrical product specifications (GPS) - Characteristics and conditions - Definitions
- ISO-2538 - Geometrical Product Specifications (GPS) - Series of angles and slopes on prisms
- ISO-2538-1 - Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes
- ISO-2538-2 - Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing
Other SDOs:
- DIN-EN-ISO-2538 - Geometrical product specifications (GPS) - Series of angles and slopes on prisms
- EN-ISO-1 - Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties
- EN-ISO-1119 - Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
- EN-ISO-12780-2 - Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators
- EN-ISO-14253-1 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification (ISO 14253-1:2013)
- EN-ISO-14253-2 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
- EN-ISO-14253-3 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements
- EN-ISO-14253-5 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments
- EN-ISO-14638 - Geometrical product specifications (GPS) - Matrix model
- EN-ISO-17450-1 - Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
- EN-ISO-17450-2 - Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
- EN-ISO-17450-3 - Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features
- EN-ISO-20170 - Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
- EN-ISO-22432 - Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
- EN-ISO-25378 - Geometrical product specifications (GPS) - Characteristics and conditions - Definitions
- EN-ISO-2538-1 - Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes
- EN-ISO-2538-2 - Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing
- JIS-B-0612 - Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles
- JIS-B-0615 - Geometrical Product Specifications (GPS) -- Series of angles and slopes on prisms
- JIS-B-0641-1 - Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformance or nonconformance with specifications
- JIS-B-0672-1 - Geometrical Product Specifications (GPS) -- Geometrical features -- Part 1: General terms and definitions
- JIS-B-0672-2 - Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
- JIS-B-7184 - Profile projectors
- JIS-B-7512 - Steel tape measures
- JIS-B-7522 - Textile tape measures
- SIS-CEN-ISO/TS-14253-4 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010)
- SIS-ISO/TR-14253-6 - Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces (ISO/TR 14253-6:2012)
- SIS-ISO/TR-16015 - Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
- SIS-ISO/TS-12780-1 - Geometrical Product Specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness
- SIS-ISO/TS-12780-2 - Geometrical Product Specifications (GPS) - Straightness - Part 2: Specification operators
- SIS-ISO/TS-12781-1 - Geometrical Product Specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness
- SIS-ISO/TS-12781-2 - Geometrical Product Specifications (GPS) - Flatness - Part 2: Specification operators
- SIS-ISO/TS-14253-3 - Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements
- SIS-ISO/TS-17450-1 - Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification
- SIS-ISO/TS-17450-2 - Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators and uncertainties
- SIS-ISO/TS-17863 - Geometrical product specification (GPS) - Geometrical tolerancing of moveable assemblies (ISO/TS 17863:2013, IDT)
- SS-EN-ISO-1 - Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
- SS-EN-ISO-1119 - Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
- SS-EN-ISO-12780-1 - Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
- SS-EN-ISO-12780-2 - Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
- SS-EN-ISO-12781-1 - Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
- SS-EN-ISO-12781-2 - Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
- SS-EN-ISO-14253-1 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
- SS-EN-ISO-14253-2 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
- SS-EN-ISO-14253-3 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
- SS-EN-ISO-14253-5 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
- SS-EN-ISO-14406 - Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
- SS-EN-ISO-14638 - Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
- SS-EN-ISO-14660-1 - Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999)
- SS-EN-ISO-14660-2 - Geometrical Procduct Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feautre (ISO 14660-2:1999)
- SS-EN-ISO-17450-1 - Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
- SS-EN-ISO-17450-2 - Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
- SS-EN-ISO-17450-3 - Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
- SS-EN-ISO-20170 - Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
- SS-EN-ISO-20932-3 - Textiles - Determination of the elasticity of fabrics - Part 3: Narrow fabrics (ISO 20932-3:2018)
- SS-EN-ISO-21204 - Geometrical product specifications (GPS) - Transition specification (ISO 21204:2020)
- SS-EN-ISO-22432 - Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
- SS-EN-ISO-25378 - Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
- SS-EN-ISO-2538 - Geometrical product specifications (GPS) - Series of angles and slopes on prisms (ISO 2538:1998)
- SS-EN-ISO-2538-1 - Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
- SS-EN-ISO-2538-2 - Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
- SS-ENV-ISO-14253-2 - Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:1999)
- SS-ISO-1119 - Geometrical Product Specification (GPS) - Surface imperfections - Series of conical tapers and taper angles
- SS-ISO-2538 - Geometrical Product Specification (GPS) - Series of angles and slopes on prisms
- UNE-EN-ISO-17450-3 - Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features