Document Center List of Standards on Protection Against Electric Shock. Live Working Including Tools For Working With Voltages
ICS Code 13.260
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D120 - Standard Specification for Rubber Insulating Gloves
- ASTM-F1116 - Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
- ASTM-F1117 - Standard Specification for Dielectric Footwear
- ASTM-F1505 - Standard Specification for Insulated and Insulating Hand Tools
- ASTM-F1506 - Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
- ASTM-F1564 - Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers
- ASTM-F2522 - Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards
- ASTM-F2621 - Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure
- ASTM-F2677 - Standard Specification for Electrically Insulating Aprons
- ASTM-F2715 - Standard Specification for Temporary Protective Equipotential Bond Mat To Be Used on De-Energized Equipment
- ASTM-F2939 - Standard Specification for High Voltage Phasing Testers
- ASTM-F3121 - Standard Guide for In-Service Inspection, Maintenance, and Electrical Testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP))
- ASTM-F479 - Standard Specification for In-Service Care of Insulating Blankets
- ASTM-F496 - Standard Specification for In-Service Care of Insulating Gloves and Sleeves
- ASTM-F696 - Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens
- ASTM-F711 - Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools
- ASTM-F712 - Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers
- ASTM-F819 - Standard Terminology Relating to Electrical Protective Equipment for Workers
- ASTM-F968 - Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers (Withdrawn 2008)
BSI:
- BS-2754 - Construction of electrical equipment for protection against electric shock
- BS-4444 - Guide to electrical earth monitoring and protective conductor proving
- BS-5958-1 - Code of practice for control of undesirable static electricity
- BS-5958-2 - Code of practice for control of undesirable static electricity. Recommendations for particular industrial situations
- BS-6907-2 - Electrical installations for open-cast mines and quarries
- BS-6907-3 - Electrical installations for open-cast mines and quarries
- BS-7430 - Code of practice for protective earthing of electrical installations
- BS-7739-1 - Voltage detectors. Specification for capacitive type to be used for voltage exceeding 1 kV a.c.
- BS-8020 - Tools for live working. Specification for insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c.
- BS-EN-50237 - Gloves and mitts with mechanical protection for electrical purposes
- BS-EN-50286 - Electrical insulating protective clothing for low-voltage installations
- BS-EN-50321 - Electrically insulating footwear for working on low voltage installations
- BS-EN-50321-1 - Live working. Footwear for electrical protection
- BS-EN-50340 - Hydraulic cable cutting devices. Devices to be used on electrical installations with nominal voltage up to AC 30 kV
- BS-EN-50365-TC - Tracked Changes. Live Working. Electrically insulating helmets for use on low and medium voltage installations
- BS-EN-50488 - Railway applications. Fixed installations. Electrical protective measures for working on or near an overhead contact line system and/or its associated return circuit
- BS-EN-50508 - Multi-purpose insulating sticks for electrical operations on high voltage installations
- BS-EN-50528-TC - Tracked Changes. Insulating ladders for use on or near low voltage electrical installations
- BS-EN-60743 - Live working. Terminology for tools, devices and equipment
- BS-EN-60825-2 - Safety of laser products
- BS-EN-60832 - Specification for insulating poles (insulating sticks) and universal tool attachments (fittings) for live working
- BS-EN-60832-1 - Live working. Insulating sticks and attachable devices
- BS-EN-60832-2 - Live working. Insulating sticks and attachable devices
- BS-EN-60855 - Insulating foam-filled tubes and solid rods for live working
- BS-EN-60855-1 - Live working. Insulating foam-filled tubes and solid rods
- BS-EN-60855-1-TC - Tracked Changes. Live working. Insulating foam-filled tubes and solid rods
- BS-EN-60900 - Live working. Hand tools for use up to 1000 V a.c. and 1500 V d.c.
- BS-EN-60903 - Live working. Gloves of insulating material
- BS-EN-60984 - Specification for sleeves of insulating material for live working
- BS-EN-60990 - Methods of measurement of touch current and protective conductor current
- BS-EN-61111 - Live working. Electrical insulating matting
- BS-EN-61112 - Live working. Electrical insulating blankets
- BS-EN-61140 - Protection against electric shock. Common aspects for installation and equipment
- BS-EN-61140-TC - Tracked Changes. Protection against electric shock. Common aspects for installation and equipment
- BS-EN-61229 - Rigid protective covers for live working on a.c. installations
- BS-EN-61230 - Live working. Portable equipment for earthing or earthing and short-circuiting
- BS-EN-61235 - Live working. Insulating hollow tubes for electrical purposes
- BS-EN-61236 - Live working. Saddles, stick clamps and their accessories
- BS-EN-61243-1 - Live working. Voltage detectors
- BS-EN-61243-2 - Live working. Voltage detectors
- BS-EN-61243-3 - Live working. Voltage detectors
- BS-EN-61243-5 - Live working. Voltage detectors
- BS-EN-61318 - Live working. Conformity assessment applicable to tools, devices and equipment
- BS-EN-61472 - Live working. Minimum approach distances for a.c systems in the voltage range 72,5 kV to 800 kV. A method of calculation
- BS-EN-61477 - Live working. Minimum requirements for the utilization of tools, devices and equipment
- BS-EN-61479 - Live working. Flexible conductor covers (line hoses) of insulating material
- BS-EN-61481 - Live working. Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
- BS-EN-61481-1 - Live working. Phase comparators
- BS-EN-61481-2 - Live working. Phase comparators
- BS-EN-61481-2-TC - Tracked Changes. Live working. Phase comparators
- BS-EN-61508-1 - Functional safety of electrical/electronic/ programmable electronic safety-related systems
- BS-EN-61508-2 - Functional safety of electrical/electronic/ programmable electronic safety-related systems
- BS-EN-61508-3 - Functional safety of electrical/electronic/ programmable electronic safety-related systems
- BS-EN-61508-4 - Functional safety of electrical/electronic/ programmable electronic safety related systems
- BS-EN-61508-5 - Functional safety of electrical/electronic/ programmable electronic safety related systems
- BS-EN-61508-6 - Functional safety of electrical/electronic/ programmable electronic safety related systems
- BS-EN-61508-7 - Functional safety of electrical/electronic/ programmable electronic safety related systems
- BS-EN-62192 - Live working. Insulating ropes
- BS-EN-62237 - Live working. Insulating hoses with fittings for use with hydraulic tools and equipment
- BS-EN-IEC-60793-1-34 - Optical fibres
- BS-EN-IEC-60793-1-34-TC - Tracked Changes. Optical fibres
- BS-EN-IEC-60895 - Live working. Conductive clothing
- BS-EN-IEC-60900 - Live working. Hand tools for use up to 1 000 V AC and 1 500 V DC
- BS-EN-IEC-60900-TC - Tracked Changes. Live working. Hand tools for use up to 1 000 V AC and 1 500 V DC
- BS-EN-IEC-61318 - Live working. Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
- BS-EN-IEC-61318-TC - Tracked Changes. Live working. Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
- BS-EN-IEC-62271-213 - High-voltage switchgear and controlgear
- BS-EN-IEC-62819 - Live working. Eye, face and head protectors against the effects of electric arc. Performance requirements and test methods
- BS-IEC-60050-651 - International Electrotechnical Vocabulary
- BS-IEC-60529 - Degrees of protection provided by enclosures (IP code)
- BS-IEC-61111 - Matting of Insulating Material for Electrical Purposes
- BS-IEC-61112 - Blankets of Insulating Material for Electrical Purposes
- BS-IEC-61942 - Live working. Gloves and mitts with mechanical protection
- BS-IEC-TS-61813 - Live working. Care, maintenance and in-service testing of aerial devices with insulating booms
- DD-ENV-50196 - Live working. Required insulation level and related air distances. Calculation method
- DD-ENV-50354 - Electrical arc test methods for material and garments, for use by workers at risk from exposure to an electrical arc
- DD-ENV-61111 - Matting of insulating material for electrical purposes
- PD-6519-1 - Guide to effects of current on human beings and livestock
- PD-CLC-50404 - Electrostatics. Code of practice for the avoidance of hazards due to static electricity
- PD-CLC-50417 - Safety of household and similar electrical appliances. Interpretations related to European Standards in the EN 60335 series
- PD-CLC-50417-TC - Tracked Changes. Safety of household and similar electrical appliances. Interpretations related to European Standards in the EN 60335 series
- PD-CLC-50479 - Electrical installation guide. Selection and erection of electrical equipment. Wiring systems. Limitation of temperature rise of connecting interfaces
- PD-CLC-60079-32-1 - Explosive atmospheres
- PD-CLC-60079-32-1-TC - Tracked Changes. Explosive atmospheres
- PD-CLC-IEC-61508-0 - Functional safety of electrical/electronic/programmable electronic safety-related systems
- PD-IEC-61243-6 - Live working. Voltage detectors
- PD-IEC-61278 - Live working. Guidelines for dielectric testing of tools and equipment
- PD-IEC-61328 - Live working. Guidelines for the installation of transmission and distribution line conductors and earth wires. Stringing equipment and accessory items
- PD-IEC-61508-0 - Functional safety of electrical/electronic/programmable electronic safety-related systems. Functional safety and IEC 61508
- PD-IEC-61911 - Live working. Guidelines for the installation of distribution line conductors. Stringing equipment and accessory items
- PD-IEC-62263 - Live working. Guidelines for the installation and maintenance of optical fibre cables on overhead power lines
IEC:
- IEC-529 - Degrees of Protection Provided by Enclosures (IP Code)
- IEC-60050-195 - International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
- IEC-60050-651 - International Electrotechnical Vocabulary - Part 651: Live working
- IEC-60050-651-AM1 - Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 651: Live working
- IEC-60364-4-41 - Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
- IEC-60364-4-41-AM1 - Amendment 1 - Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
- IEC-60364-5-51 - Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
- IEC-60364-5-52 - Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
- IEC-60364-6-61 - Part 6-61: Verification - Initial Verification, Electrical Installations of Buildings
- IEC-60529 - Degrees of protection provided by enclosures (IP Code)
- IEC-60529-1 - Amendment 1
- IEC-60529-AM2 - Amendment 2 - Degrees of protection provided by enclosures (IP Code)
- IEC-60832 - Insulating Poles (Insulating Sticks) & Universal Tool Attachments (Fittings) for Live Work
- IEC-60832-1 - Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks
- IEC-60832-2 - Live working - Insulating sticks and attachable devices - Part 2: Part 2: Attachables devices
- IEC-60855-1 - Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section
- IEC-60895 - Live working - Conductive clothing
- IEC-60900 - Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC
- IEC-60900-RL - Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC
- IEC-60903 - Live working - Electrical insulating gloves
- IEC-60984 - Live working - Electrical insulating sleeves
- IEC-60984-1 - IEC 60984 Ed.1 : Sleeves of insulating material for live working
- IEC-61032 - Protection of persons and equipment by enclosures - Probes for verification
- IEC-61057 - Live working - Insulating aerial devices for mounting on a chassis
- IEC-61111 - Live working - Electrical insulating matting
- IEC-61112 - Live working - Electrical insulating blankets
- IEC-61140 - Protection against electric shock - Common aspects for installation and equipment
- IEC-61140-1 - Amendment 1 - Protection against electric shock - Common aspects for installation and equipment
- IEC-61140-RL - Protection against electric shock - Common aspects for installation and equipment
- IEC-61201 - Use of conventional touch voltage limits - Application guide
- IEC-61229-1 - Amendment 1
- IEC-61229-2 - Amendment 2
- IEC-61230 - Live working - Portable equipment for earthing or earthing and short-circuiting
- IEC-61234-2 - Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets
- IEC-61236 - Live working - Saddles, stick clamps and their accessories
- IEC-61243-2 - Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.
- IEC-61243-2-1 - Amendment 1
- IEC-61243-2-2 - Amendment 2
- IEC-61243-3 - Live working - Voltage detectors - Part 3: Two-pole low-voltage type
- IEC-61243-5 - Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS)
- IEC-61243-6 - Live working - Voltage detectors - Part 6: Guidelines on non-contact voltage detectors (NCVD) for use at nominal voltages above 1 kV AC
- IEC-61318 - Live working - Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
- IEC-61328 - Live working - Guidelines for the installation of transmission and distribution line conductors and earth wires - Stringing equipment and accessory items
- IEC-61472 - Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
- IEC-61472-2 - Live working - Minimum approach distances - Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV
- IEC-61477 - Live working - Minimum requirements for the utilization of tools, devices and equipment
- IEC-61477-1 - Amendment 1: Live Working - Minimum Requirements for the Utilization of Tools, Devices & E
- IEC-61477-2 - Amendment 2: Live Working - Minimum Requirements for the Utilization of Tools, Devices and E
- IEC-61478 - Live working - Ladders of insulating material
- IEC-61478-1 - Amendment 1
- IEC-61479 - Live working - Flexible conductor covers (line hoses) of insulating material
- IEC-61479-1 - Amendment 1
- IEC-61481 - Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
- IEC-61481-1 - Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
- IEC-61481-2 - Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1kV to 36 kV a.c.
- IEC-61813 - Live working - Care, maintenance and in-service testing of aerial devices with insulating booms
- IEC-61911 - Live working - Guidelines for installation of distribution line conductors - Stringing equipment and accessory items
- IEC-61958 - High-Voltage Prefabricated Switchgear & Controlgear Assemblies - Voltage Presence Indicati
- IEC-62192 - Live working - Insulating ropes
- IEC-62193 - Live working - Telescopic sticks and telescopic measuring sticks
- IEC-62237 - Live working - Insulating hoses with fittings for use with hydraulic tools and equipment
- IEC-62263 - Live working - Guidelines for the installation and maintenance of optical fibre cables on overhead power lines
- IEC-62271-213 - High-voltage switchgear and controlgear - Part 213: Voltage detecting and indicating system
- IEC-62271-215 - High-voltage switchgear and controlgear - Part 215: Phase comparator used with VDIS
- IEC-62819 - Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods
Other SDOs:
- AWWA-D120 - Standard Specification for Rubber Insulating Gloves
- EN-50272-1 - Safety requirements for secondary batteries and battery installations - Part 1: General safety information
- EN-50321 - Electricity Insulating Footwear for Working on Low Voltage Installations
- EN-50340 - Hydraulic Cable Cutting Devices - Devices To Be Used on Electrical Installations With
- EN-50508 - Multi-Purpose Insulating Sticks for Electrical Operations on High Voltage Installation
- EN-60832-1 - Live Working, Insulating Sticks & Attachable Devices, Insulating Sticks
- EN-60832-2 - Live Working, Insulating Sticks & Attachable Devices, Attachable Devices
- EN-60855-1 - Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section
- EN-60900 - Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c.
- EN-60903 - Specification for Gloves & Mitts of Insulating Material Forlive Working
- EN-61057 - Live working - Insulating aerial devices for mounting on a chassis
- EN-61111 - Live Working, Electrical Insulating Matting
- EN-61112 - Live Working, Electrical Insulating Blankets
- EN-61140 - Protection against electric shock - Common aspects for installation and equipment
- EN-61230 - Live Working, Portable Equipment for Earthing or Earthing & Short-Circuiting
- EN-61236 - Live working - Saddles, stick clamps and their accessories
- EN-61243-3 - Live working - Voltage detectors - Part 3: Two-pole low-voltage type
- EN-61318 - Live Working, Conformity Assessment Applicable To Tools, Devices & Equipment
- EN-61472 - Live working - Minimum approach distances for a.c systems in the voltage range 72,5 kV to 800 kV - A method of calculation
- EN-61477 - Live working - Minimum requirements for the utilization of tools, devices and equipment
- EN-61481-1 - Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
- EN-61481-2 - Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
- EN-61508-1 - Part 1: General Requirements, Functional Safety of Electrical/Electronic/Programmable
- EN-61508-2 - Part 2: Requirements for Electrical/Electronic Programmable Electronic Safety-Related
- EN-61508-3 - Part 3: Software Requirements, Functional Safety of Electrical/Electronic/Programmable
- EN-61508-4 - Part 4: Definitions & Abbreviations, Functional Safety of Electrical/Electronic/Progra
- EN-61508-5 - Part 5: Examples of Methods for the Determination of Safety Integrity Levels, Functio
- EN-61508-6 - Part 6: Guidelines on the Application of IEC-61508-2 & IEC-61508-3 (IEC-61508-6:2010),
- EN-61508-7 - Part 7: Overview of Techniques & Measures (IEC-61508-7:2010), Functional Safety of Ele
- EN-62192 - Live Working, Insulating Ropes
- EN-IEC-60900 - Live working - Hand tools for use up to 1000 V AC and 1500 V DC
- JIS-C-0922 - Protection of persons and equipment by enclosures for electrical apparatus -- Probes for verification
- SS-EN-1987-3 - Electrically propelled road vehicles - Specific requirements for safety - Part 3: Protection of users against electrical hazards
- SS-EN-60529 - Degrees of protection provided by enclosures (IP Code)
- SS-EN-61140 - Protection against electric shock - Common aspects for installation and equipment
- UNE-EN-60079-32-2 - Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests